Laboratory Test Requests

Description:
Microbiology laboratory needed to test cosmetic cream to see if there are any bacterial contents, if the cream still has a shelf life and is still good to be used.

Description:
Analytical Chemistry laboratory needed to test alcolholic beverages for thujone content in ppm.

Description:
Microbiology laboratory needed for specimen (mold) testing to ASTM D3273 with evaluation per ASTM D3274

Description:
Geological laboratory needed to analyze minerals

Description:
Microbiology laboratory needed to test for the serotyping of Steroptococcus Spp.

Description:
Bioanalytical laboratory needed for LAL, endotoxin testing

Description:
Physical laboratory needed for ASTM F 2077 Test Methods for Intervertebral Body Fusion Devices, F543 Standard Specification and Test Methods for Metallic Medical Bone Screws, F1717 Standard Test Method for Spinal Implant Constructs in a Vertebrectomy Model. The Brazilian regulatory registration process has recently changed and they are requesting some tests that currently not done in the country. ...

Description:
Geological Physical laboratory needed for Grain Size Analysis (ASTM D422-63) down to 2 micron. Hardness Analysis-specifically ranked against Zirconia, Silicon Carbide and Tungsten carbide Grain shape - rounded vs. angular

Description:
Physical laboratory needed for rubber testing - scorch test and mooney viscosity test

Description:
Preclinical laboratory needed to administer a novel therapeutic agent to small rodents, then measure changes in levels of growth hormone or some related substance, e.g. IGF-1.

Description:
Clinical laboratory needed for urine testing for date rape drug

Description:
FDA GMP Toxicology laboratory needed for toxicology testing for FDA approval

Description:
Bioanalytical laboratory needed for running chapter 23 on our powdered samples - miminum 3 samples. We need the facility to be FDA compliant since this is a pharmaceutical graade material, and we must audit, as well as the FDA must be allowed to audit the results if they request.

Description:
Analytical Chemistry needed to test power transformer for complete oil tests and analysis

Description:
Mechanical Analytical Chemistry laboratory needed to test electronic device (Aircraft Warning Light Systems) FAA Certification in accordance with AC150/5345-43F; Photometric Test,High Temperature Test,Low Temperature,Test Rain Test,Wind Humidity Test, Salt Fog Test

Description:
Analytical Chemistry laboratory needed for the following tests: Anti microbial,lead content,Air permiability,Ultra violet test for fabric and garments

Description:
Analytical Chemisry laboratory needed to test various polymer sheets for WVTR - water vapor transmission rate

Description:
Analytical Chemistry laboratory needed for quantitative and qualitative analysis for polymer solutions

Description:
Analytical Chemistry laboratory needed for analysis of components of known ingredients of supplied finished product - reverse formulation engineering.

Description:
Analytical Chemistry laboratory needed for testing thermal conductivity for polyisocyanurate foam and polyurethane block

Description:
Analytical Chemistry Toxicology Laboratory needed for Permethrin detection test in Urine and Permethrin detection test in the environment.

Description:
Analytical Chemistry laboratory needed for testing of phosphate content in ppm in the boiler water.

Description:
Bioanalytical Microbiology laboratory needed for preclinical efficacy mouse models - interested in mouse models of neuropathic pain, T cell transfer IBD models and also to culture primary human explant tissue from disease states

Description:
Bioanalytical laboratory needed for testing quantitation of testosterone and/or dihydro testosterone levels in serum from mice.

Description:
MATERIALS ANALYTICAL CHEMISTRY LABORATORY NEEDED TO TEST POLYISOCYANURATE AND POLY URETHANE BLOCK. TEST DESCRIPTION: MEASUREMENT OF DENSITY ,THERMAL CONDUCTIVITY,COMPRESSIVE STRENGTH AND WATER VAPOR TRANSMISSION

Description:
Bioanalytical laboratory needed to test blood acetaldehyde from clinical human specimens in sensitivity range of 10uM minimum ideally 1uM minimum

Description:
Microbiology laboratory needed for enumeration (CFU) of aerobic and anaerobic thermophilic bacteria from samples collected over time.

Description:
Bioanalytical pharmaceology laboratory needed for equilibrim dialysis to measure drug-brain tissue binding, using fresh rat or mouse brain tissue.

Description:
FDA GMP Analytical Chemistry laboratory needed for Capillary Zone Electrophoresis testing

Description:
Analytical Chemistry laboratory needed for Liquid hydrocarbon mixtures and single products testing: - IR or UV spectra - Boiling Point - Viscosity - Molecular Weigth range - Compositional analysis - % aliphatics Prices for 1, 5 and 25 samples per test by 11 january. Please note: this is a tender and is not a benchmarking request; the actual number of samples for each test may vary from 20 ...

Description:
Analytical Chemistry laboratory needed for OECD Biodegradation Testing (OECD 302B) ZAHN-WELLENS test on surfactant

Description:
Geological laboratory needed for carbon dating a rock/glass slag(unsure if it is a rock or piece of slag). I have a rock that Act Labs did a chemistry test.

Description:
Analytical Chemistry laboratory needed to carry out trace level headspace-gc-ms analysis for analytes in active pharmaceutical ingredients to GMP standards at low ppm or ppb levels

Description:
Food Analytical Chemistry laboratory needed for the food item and the general ingredients I have, but need to determine the amount of each element - % of salt, % molasses etc.

Description:
Microbiology testing for antibiotic resistance Testing

Description:
Analytical Chemistry laboratory needed to test plastcizer type in flexible vinyl compounds

Description:
Mechanical laboratory needed that can test automotive ignition coils - only static circuit resistance and high voltage output.

Description:
Analytical Chemistry laboratory needed for HPLC Testing to determine percent content methyl paraben in OTC topical pharmaceutical

Description:
FDA Analytical Chemistry laboratory needed for water extraction

Description:
US FDA GMP Laboratory needed for nutritional labeling testing (canada & FDA) for Omega fatty acids.

Description:
FDA GMP bioanalytical laboratory needed for Liquid identification testing collagen and chitosan

Description:
FDA GMP Microbiology Laboratory needed for BAM testing of gelatin samples for endotoxin

Description:
Electrical laboratory needed for electrical & electronics meter testing & calibration

Description:
Microbiology laboratory needed for endotoxin testing of gelatine.

Description:
Analytical Chemistry Laboratory needed for testing for Determination of total carbonyl compounds in 2-propanol according to ACS 10th edition. The method requires the use of a polarograph.

Description:
Physical laboratory needed for testing Concentrating Solar Sun Tracker.

Description:
Analytical Chemistry Laboratory needed for HPLC identification testing of hormone powders (testosterone, oxandrolone, HGH, etc) to test label claims with respect to active ingredient and purity.

Description:
Clinical Laboratory needed for Blood Testing forEquol

Description:
Analytical Chemistry laboratory needed for ASTM D-1133 kauri-butanol value

Description:
Analytical Chemsitrylaboratory needed for deformulation testing of cosmetics

Description:
Analytical Chemistry laboratory needed to test for carbonyl compounds ( as agregate) in 2-propanol according to ACS 10th edition. The method requires the use of a polarograph.

Description:
Food Analytical Chemistry laboratory needed for testing for cake alcohol content.

Description:
Analytical Chemsitry laboratory needed to test one of our products-water soluble fertilizer for TDG classification.

Description:
GLP Analytical Chemistry laboratory needed for sodium, potassium, magnesium, calcium and iron in 10 samples

Description:
Analytical Chemistry laboratory needed for analysis of 1 acetamino benzene sulfonyl chloride

Description:
Analytical Chemistry laboratory needed for ASTM F2466-05 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

Description:
Materials laboratory needed to for CEC, ASTM, EPA testing the rate of biodegradation of vegetable based transformer oil and its toxity/toxicology

Description:
Analytical Chemistry laboratory needed to test our new developing insect repellent for assurance of safety before proceeding further. This would probably be acute toxicity and mutagenicity.

Description:
Geological laboratory needed to determine metal grades in rock samples and exploration drill core

Description:
Analytical Chemistry laboratory needed for chemically or instrumental analysis method of 1 acetamino benzene sulfonyl chloride

Description:
Analytical Chemistry laboratory needed to test Sodium Hydroxide full USP, Sodium Chloride USP and EP Monograph, L-Isoleucine USP Monograph and Tris (Tromethamine) USP Heavy Metal and Nitrates for Water EP

Description:
Analytical Chemistry laboratory needed to test our design for concentrating solar tracking - how much improvement there is to the PV under the sun. Beside, we also wish to test how sharp our focusing to the PV board. I hope to get the out door practical result.

Description:
Analytical Chemistry laboratory needed for Petcoke analysis: Ultimate Proximate Ash characteristics Trace metals in petcoke

Description:
Analytical Chemistry laboratory needed for a solid base report on a few aspects like textile type(Combed-Semi combed or other), garment Wt per GSM, color fastness, Sizes etc. We have received a consignment from one of the supplier from India. We feel that the entire quality has been tampered with.

Description:
Analytical Chemistry laboratory needed to analyze the Total Fatty Acids in wastewater effluent samples.

Description:
Analytical Chemistry laboratory needed for sterility testing for EO Gas Sterilized Medical Devices

Description:
Bioanalytical laboratory needed for highly sensitive assay testing to detect low levels of mouse IL-2. Sensitivity should be the done seen with the CTL bioassays.

Description:
Preclinical laboratory needed to test the ex-vivo efficacy of 1 or 2 natural ingredients in reducing hair growth. The test should be performed on a whole human skin model. First stage: Application of 3-4 dilutions of the material in the skin's growth media and measurments of hair growth rate. Second stage: If first stage positive application of 3-4 dilutions of the ingredient on the skin model ...

Description:
Bioanalytical laboratory neded for Erythorcyte Fragility Assay - a vaccine study in rabbits

Description:
Food Microbiology laboratory needed to test honey imported from Armenia

Description:
Food Analytical Chemistry laboratory needed to find out what the ingredients in a sauce are

Description:
Analytical Chemistry laboratory needed to conduct a material composition analysis on (i) TPE product case (as shown in figure), (ii) TPE resin or (iii) TPE resin with additive. The figure shows that there are some white powder release from the black surface (TPE). So, we would like to determine whether the TPE resin/product (i-iii) contain the following material: (1). 硬脂酸 ...

Description:
Analytical Chemistry laboratory needed for the objective of the study to measure the oral bioavailability of total chromium (Cr) from soils. The study would need to be designed with the following parameters and protocols: animals: 5-7 animals/dose group species: rats or non-human primates 4 dose groups: control, feed-containing Cr(VI), two soil samples containing different concentrations of ...

Description:
Clinical laboratory needed for Vaginal Irritation Study (in accordance with AAMI ISO 10993-10) 2. Delayed Contact Sensitization Study in the Guinea Pig (AAMI ISO 10993-10) 3. Cytotoxicity (AAMI ISO 10993-5) 4. Systemic Toxicity (AAMI ISO 10993-11)

Description:
Bioanalytical laboratory needed for LCMS testing of Triamcinolone and cortisol from goat serum, goat synovial fluid and rabbit serum.

Description:
Analytical Chemistry laboratory needed for 5 batch analysis for metsulfuron methyl

Description:
Bioanalytical laboratory needed for testing quantitative E.coli DNA content in the sample of purified recombinant protein, research grade

Description:
Physical laboratory needed for reliability testing - Cycle/static/abuse testing of aircraft seats.

Description:
Pharmaceutical Analytical Chemistry laboratory needed for the following testing:  Ceteareth-20 o Peg-20 Cetostearyl Alcohol; Peg-20 Cetyl/Stearyl Ether; Polyethylene Glycol  Disodium EDTA o Acetic Acid, Tetrasodium EDTA  Parabens o Methyl-, Ethyl-, Butyl-, Propyl-, Benzoic Acid  Phthalates o Benzenedicarboxylic acid, Butylphthalate, Diethylphthalate  Proylene Glycol o 1,2-Propa ...

Description:
Bioanalytical laboratory needed for the following assays: FATTY ACID PROFILE POSTAGLANDIN E2 THROMBAXANE A4 LEUKOTRIENES HYDROXYEICOSATETRANOIC ACIDS(HETEs) I NEED TO KNOW WHERE I CAN SEND THESE SAMPLES TO. I NEED THE COST, TURN AROUND TIME, AND SET UP DATES.

Description:
Analytical Chemistry laboratory needed for the surface of furniture, walls or clothing tested for the residue of drug abuse.

Description:
Preclinical pharmacology laboratory needed for animal models of cholangio-carcinoma, biliary tract cancer, bile duct cancer, biliary cancer

Description:
Food Analytical Chemistry laboratory needed for polydimethylsiloxane analysis which can be conducted using GC-MS. The methodology is based on Standard ASTM methods. The pre-treatment technique involves the formation of a dibromo-derivative which is then subjected to a solvent extraction. An aliquot of the concentrated extract is analysed by GC-MS. The mass spectrometer is operated in the posit ...

Description:
Microbiology laboratory needed for determination of Clostridium perfringens type A, B or ..............

Description:
Serology laboratory needed for testing selenium in ppm amounts in serum samples. 500 ul pr sample. Two batches of 140 samples. PPM levels of Se. If test is decided, it will be conducted during January.

Description:
Metallurgical laboratory needed to find out whether Zirconium coating is applied on the overall surface area of the Aluminium Coating

Description:
Analytical Chemistry needed for routine HPLC analysis (SEC and RP HPLC). The facility should have well maintained HPLC systems and can provide fast and reliable service on a regular base. Local facility is prefered.

Description:
Biomedical Analytical Chemistry laboratory needed by being given a proprietary API, develop a dry powder inhaler product. It will be necessary to develop the appropriate physical form of the API and provide it in a device. Clinical testing volumes will be needed.

Description:
Analytical Chemistry laboratory needed for Ignition (ASTM D1929) and TGA/MS analysis of three water extended polyester (WEP) samples

Description:
Analytical chemistry laboratory needed for testing of Bone meal, yellow grease, tallow, and other commodities. For the purpose of inventory testing of a commodities company.

Description:
Analytical Chemistry laboratory needed for rubidium testing

Description:
Food Microbiology laboratory needed for ELISA food allergy testing for 88 foods for the following: IgG Food Antibody Assessment (88 foods) IgG Vegetarian Foods (21 foods) IgG Spices (24 spices)

Description:
Materials laboratory needed for thermogravimetric analysis or TGA to determine percent residual organic material in a sample of Al metallic pigment

Description:
Analytical chemistry laboratory needed to test some tablet samples from stress stability. We put API form I and now we want to know if some transformed to form II and in which quantity ( by XRD )? If You do that analysis( XRD )how long does it take to have the results from moment You receive the samples and what is the price of analyse per sample?

Description:
Immunology laboratory needed to test the in vitro efficacy of natural anti-HSV 1 (anti-HSV 2 optional) ingredients in vero / human cell line in comparison w/ acyclovir or other standard compound

Description:
Food analytical chemistry laboratory needed for nutritional testing of smoothie beverage: Nutrition Content. Calorie and Protein Count.

Description:
Analytical Chemistry Laboratory needed for qualitative identification testing of scale and mud compounds in the bottom of a water distiller. Will be able to mail out samples.

Description:
Metallurgical laboratory needed for soil analysis to specifically test for these specific nickel compounds: nickel acetate, nickel carbonate, nickel carbonyl, nickel hydroxide, nickelocene, nickel oxide, and nickel subsulfide.

Description:
Bioanalytical laboratory needed for antibody purification including affinity purification, antibody characterization and selection by western blotting, inmmunopreciptation and ELISA development ability

Description:
Food Analytical Chemistry laboratory needed for qualitative and/or quantitative determination of formaldehyde in dry food samples (dry vegetable mixes).

Description:
FDA GMP Analytical Chemistry laboratory needed for the analysis of Bisphenol A (BPA) and di-2-ethyl hexyl phthalate (DEHP)in liquid samples (water or foods). Appropriate methods are GC/MS, GC/MS/SIM, GC/ECD, or GC/FID

Description:
Food Analytical Chemsitry laboratory needed to analyze GLYCEROL ESTER OF WOOD ROSIN IN BEVERAGES. We have developed a GC method for this analysis.

Description:
Food Analytical Chemistry laboratory needed to test for bisphenol A in a variety of food products. However, before committing, we'd like to hear about pricing and timing.

Description:
Analytical chemistry laboratory needed for methoxyl assay -methoxy group determination of methylcellulose

Description:
Electrical laboratory needed for energy test rating as per Australian standards

Description:
Analytical Chemistry Laboratory needed for Complete ASTM Natural Gas Analysis along with LHV.

Description:
Food analytical chemistry laboratory needed for foor testing: preservative test, Heavy metal test and Cereal product test

Description:
Analytical Chemistry Laboratory needed for testing 5 natural skincare products (moisturizer/lotion, exfoliator, serum) for certain ingredients such as: parabens, phthalates, ureas, propylene glycol, EDTA, artificial fragrances and colors, petroleum, L-ascorbic acid, L-sodium hyaluronate, matrixyl 3000 (palmitoyl oligopeptide, tetrapeptide), algae extract, fruit enzymes, organic aloe vera, phospho ...

Description:
Analytical chemistry laboratory needed to help determine total nitrogen in a liquid using the Kjeldahl method

Description:
FDA GMP Analytical chemistry laboratory needed for ASTM Testing to determine % of reflectance of plastic materials.

Description:
Analytical Chemistry laboratory needed for general Mycology testing conducted for the biotechnology and pharmaceutical market.

Description:
Bioanalytical laboratory needed for IgG testing in whey protein concentrate using our ALC method.

Description:
Automotive laboratory needed for a crash test on a motorcycle. We have made a prototype of a motorcycle that works with natural gas (CNG) so I need to know about standard that must be applied for controlling the reliability and safety.

Description:
Physical laboratory needed for MVTR testing or WVTR testing. We are a manufacturing company of Carrier tapes and lock reels. As such, we are a semi-con industry that is in line with packaging solutions. The laboratory will be submitting the result or report upon sampling has been done.

Description:
Pharmaceutical Bioanalytical Laboratory needed for All influenza A & B tests using Real-Time-PCR RT-PCR

Description:
Analytical Chemistry Laboratory needed for testing agarwood oil

Description:
Analytical Chemistry Laboratory needed for impurities testing in pharmaceutical drugs

Description:
Materials laboratory needed for ASTM Testing, Moisture Vapor Transmission Rate (MVTR)to ASTM F 1249.

Description:
FDA GMP Microbiology laboratory needed for preservative efficiency testing of cosmetics. Products are personal care( body butters, facial balms and body oils)

Description:
Analytical chemistry laboratory needed to determine the concentration of amines in a condensed steam sample - cyclohexlyamine, morpholine, and diethylaminoethanol

Description:
FOOD MICROBIOLOGY FOR HISTOLOGICAL EXAMINATION OF MEAT PRODUCTS

Description:
Analytical chemistry laboratory to measure viscosity of oligomer 500-2000 g/mol at 150 C, 190 C, and possibly 210 C. Expect values <100 cP Want to determine viscosity of oligomer for fluid pumping considerations.

Description:
Physical laboratory needed for packaging test - mechanical handling, stacked vibration, low pressure, vehicle vibration, warehouse stacking

Description:
Analytical chemistry laboratory needed for sub ppm sulphur in resins

Description:
Analytical chemistry laboratory needed to find the presence of toxic metals and adulteration with Western drugs in traditional chinese medicine.

Description:
Bioanalytical laboratory needed to test a potential therapeutic in an animal model of brain ischemia/stroke

Description:
Analytical chemistry laboratory needed to undertake gel permeation chromatography measurements on polymer resins (typically Nylon 12 or Pebax pellets) to determine molecular weight and molecular weight distribution of the polymer. Thanks for your help.

Description:
Biochemistry laboratory needed to determine the total lipid content of a tissue extract I am working on

Description:
Materials laboratory needed to determine if the new vendors pin is acceptable. We currently use a 4mm diameter x 150mm long pin fabricated from H-13 tool steel in a tool assembly. 1) Section both the current pin and the new pin at indicated diameter 2) Perform microhardness trace across diameters of both pins 3)Produce metallurgical mounts and do an analysis of grain structures to determine if ...

Description:
Food Analytical Chemistry laboratory needed for nitrogen solubility index

Description:
Analytical chemistry laboratory needed for flash chromatography

Description:
Food Analytical Chemistry laboratory needed for HAACP Certification for beverages; non-carbonated flavored drinks, spring water.

Description:
Analytical chemistry laboratory needed for monitoring for mold, yeast, aerobic, bioburden

Description:
Analytical chemistry laboratory needed to perform a 50 wash durability test on our applied labels and a TRA (Toxicological Risk Assessment)test on our formula. We are a heat transfer label supplier for the apparel industry.

Description:
Analytical chemistry laboratory needed for USP 30 lead test for kaolin

Description:
Preclinical pharmacology laboratory needed for mouse model of pulmonary fibrosis, mouse model of renal fibrosis, mouse model of hepatic fibrosis, bleomycin mouse model of pulmonary fibrosis

Description:
Analytical chemistry labortory needed to iso analyse with 14C, for ages (Bowl, crockery and bone). Need to know how many samples needed for analysis

Description:
Metallurgical laboratory needed to test nonferrous metals content of antimony

Description:
Toxicology laboratory needed to test drinks that have been dosed to see if any kind of toxicity especially sedatives are present. These drinks are remains of milk and local brew taken by the victims.

Description:
Physical laboratory needed for testing powder coating for adhesion, film thickness, impact/chip resistance

Description:
Electrical laboratory needed for equipment to be tested in all services for the electrical field or power electronics field

Description:
Pharmaceuticals Product Safety laboratory needed to perform tests for Child Resistant cap.

Description:
Analytical chemistry laboratory needed due to positive anecdotal reports to determine if the compound has insect repellant activity. We have a safe compound that can be applied topically to skin in cosmetic and OTC drug products.

Description:
Analytical chemistry laboratory needed for testing and certifying night vision image intensifier tubes.

Description:
Genetics laboratory needed to test the efficiency of a new RNAi delivery method in a cell culture.

Description:
FDA GLP Microbiology laboratory needed for bioburden testing

Description:
Forensic Pharmaceuticals laboratory needed for drug testing on human fingernails

Description:
Bioanalytical laboratory needed to perform IL-6 ELISA assay using existing validated method. Requires the use of whole blood.

Description:
Geological laboratory needed for testing geomechanical properties (UCS/Shear/Triaxial) for clay uranium ore which must simulate freezing of the material to best replicate insitu conditions

Description:
Physical laboratory needed to test our product so that it meets ANSI standards

Description:
Analytical chemistry laboratory needed for testing several urine samples run on a GC/MS and a report listing all VOC's [approx. 60-64] and if possible their quantities.

Description:
Analytical chemistry laboratory needed to test percent fluorine level on a textile (cotton) substrated. Typical levels at less than 0.600%

Description:
GMP FDA Food Microbiology laboratory needed for testing of catering foods and implementation of hccp

Description:
Physical laboratory needed to test our Polypropylene according to ASTM D-2565-99, ASTM D 573, ASTM D 3012-04.

Description:
ANALYTICAL CHEMISTRY LABORATORY NEEDED IN INDIA OR OSMOLARITY TESTING OF SODIUM HYALURONATE SOLUTION

Description:
FDA GMP or GLP Microbiology laboratory needed in USA for USP Sterility testing, Gel clot endotoxin testing and LAL pyrogen testing on a few milligrams of 14C-labelled carboplatin, a cancer drug.

Description:
FDA GMP Analytical Chemistry Laboratory needed for cGMP analyses of pharmaceutical drug substances and intemediates - Atomic Absorption, ICP and TGA

Description:
Pharmaceuticals laboratory needed for testing silicon dioxide to the USP Monograph

Description:
Analytical chemistry laboratory needed to help benchmark the durability of our direct-to-garment dark apparel printing. In particular, measurement of the initial color palette and consistency across multiple product samples, wash-out and peeling of ink over repeated wash cycles, visibility and wash-out of the printer pre-treatment solution, and degree of banding in the printed image.

Description:
GMP Analytical Chemistry laboratory needed for light obscuration particle counting test, USP <788>, for very small parenteral product volumes (about 1 mL)

Description:
Analytical Chemistry laboratory needed for determination of phosphine (PH3) residues in raw and processed agricultural commodities.

Description:
Food Microbiology laboratory needed for hard pretzels to be analyzed to determine if there are any ingredients in the pretzels other that the ingredients specified on the package.

Description:
Toxicology laboratory needed for blood testing, medical testing, urine and saliva.

Description:
USP Microbiology laboratory needed for modified USP 51 Preservative challenge test. Three silver solutions against MRSA with 3 time points.

Description:
Microbiology laboratory needed to certify material as hypoallergenic.

Description:
GLP biotechnology laboratory needed for mouse ( or rabbits) are used for gene therapy with AAV. mRNA of the virus (and DNA) have to be localized by in situ hybridization

Description:
GLP toxicology laboratory needed for cytotoxicity, mutagenicity, dermal irritation testing

Description:
Analytical chemistry laboratory needed for the following tests: 1-13C NMR identification for enoxaparin 2- sulfate testing for enoxaparin By ion chromatography using conductivity detector

Description:
Mechanical laboratory needed for ASTM Testing of Standard DMA. Need non contact TMA ie using a laser dilatometer.

Description:
Analytical Chemistry Laboratory needed for deformulation testing (reverse engineering) of Herbal Supplement from Ingredient list and samples. Need exact formula from standard herbal ingredients.

Description:
Physical laboratory needed for pressure testing a sediment removal pipe sock filter. Sock is made from recycled textile connects to 2 inch hose with standard quick release hose clamp. Sock is 5 feet long and about 6 in diameter. Would like to know at what water pressure sock would burst. We know it is Greater than 150 PSI

Description:
FDA GLP Toxicology laboratory needed for GLP testing 2 species chronic/subchronic toxicity on pharmaceutical NCE for blood volume replacement in truma/shock.

Description:
Analytical chemistry laboratory needed for barrier film, bag and package testing - OTR at high mositure (90% prefered). Microscopy of layer thicknesses. MD and CD total thickness variations. Breakdown of layer compositions - MI, DSC, FTIR, as needed.

Description:
Physical laboratory needed to test strength of cloth; ball bursting method

Description:
Analytical chemistry toxicology laboratory needed for FDA compliance test - migration test, toxicology test, daily intake, solvent extraction.

Description:
FDA GMP Pharmaceuticals laboratory needed to test stability, microbiology and shelf life of a multivitamin

Description:
Environmental laboratory needed for soil testing to confirm that the soil on this property is suitable for cultivating crops (i.e. no petroleum/oil/gas)

Description:
Toy importer looking for laboratory in Canada for ASTM testing of toys on a regular basis for general compliance under Canadian safety standards.

Description:
ISO Product Safety and Microbiology Laboratory needed for ISO Biocompatibility Testing and Sterility Testing for EO Gas Sterilized Lens

Description:
Mechanical laboratory needed for compression testing for foam impact sound deadener

Description:
Acoustics laboratory needed for sound test for impact sound deadener foam

Description:
Analytical chemistry laboratory needed to separate all the following solvents by head space GC technique: Hexane (Mixture of isomers) methyl tertiary butyl ether acetone dmf mdc ethyl acetate benzene toluene mesityl oxide tryethyl amine 2-chloethanol chloroform note: we are facing the problem with " one of the hexane peak is merging with the mtb ether".

Description:
Analytical chemistry laboratory needed to identify one unknown chemical by ion chromatography-mS (IC-MS). Our lab has an IC and we could see the chemicals in DI water by running IC. However,we dont have the ability to identify this unknow chemical further. If your lab has the IC-MS instrument, this will answer our question.

Description:
Analytical chemistry toxicology laboratory needed for the following testing: Aquatic Toxicity(Acute LC50); Biodegradability (OECD); Acute Oral LD50(rat)

Description:
Analytical chemistry laboratory needed for test methods (IR, NMR, UV spec, Mass spec?) appropriate to determine if a sample of avocado/soy unsaponifiables (in tablet form) contains the fatty acid persin (12Z,15Z)-1-acetoxy-2-hydroxy-4-oxo-heneicosa-12, 15-diene or isopersin (12Z,15Z)-1-hydroxy-4-oxo-heneicosa-12, 15-dien-2-yl acetate. Require controls to ensure methods can detect these compounds.

Description:
Analytical chemistry laboratory needed for acid base accounting for coal mining spoils (total sulfur, sulfate sulfur)

Description:
Clinical laboratory needed for pharmacokinetic study in monkey and dog (acute dose).

Description:
Metallurgical laboratory needed to test density scales sepor type complete with 1 ltr steel can

Description:
Analytical chemistry laboratory needed to test arsenic speciation in mussels

Description:
Analytical chemistry laboratory needed for Phase Analysis: % Oil, Water, Solids % Dry solids by weight % Oil % Water

Description:
Analytical chemistry laboratory needed for plant leaves and roots - quantification of free amino acids (specifically GABA, glutamate)

Description:
Analytical chemistry laboratory needed for light transmission of plastic bottle sample, approx 0.7mm thick. Light range 350nm to 800nm

Description:
Microbiology laboratory needed to test for presence of any infestation and/or larva in a pillow made in China. The product is 100% Cotton Terrycloth filled with Flax-seed and scented with synthetic lavender.

Description:
Analytical chemistry laboratory needed for the residual moisture of a freeze dried product

Description:
Analytical chemistry laboratory needed for contract testing of media used in the filtration industry

Description:
Analytical chemistry laboratory needed for QA/AC test on polymers - GPC, titration, NMR, ICP, ICP-MS, GC-MS, IC, HPLC, TGA, KF, total solids

Description:
Bioanalytical laboratory needed for doxorubicin testing in mouse plasma and rat/human microsome

Description:
FDA GLP Physical laboratory needed to do all pre IDE testing for spinal device for the FDA

Description:
Physical food laboratory needed to test the firmness of cooked beans

Description:
Analytical chemistry laboratory needed to test dairy and feedlot manure after it has been "gasified". The residual ash will have significant amounts of various elemental nutrients, including Phosphorus, Potassium, Calcium and Sodium. We need to know how plant crops might absorb these nutrients and if there is any significant difference in the use of this ash material versus the original manure wh ...

Description:
ISO Physical Analytical chemistry laboratory in USA needed for ASTM optical quality testing of injection molded plastic lens - Luminous Transmittance Percentage, Haze Percentage, Flatness

Description:
FDA GMP Analytical chemistry laboratory needed for testing color and opalescence of clear liquids used in pharmaceutical industry (vialed solutions)

Description:
Biophysical laboratory needed for ASTM testing of stent pulsatile fatigue according to ASTM F 4277-07

Description:
FDA GMP Physical laboratory needed for testing stainless steel medical bandage scissors imported for FDA approval

Description:
Bioanalytical laboratory needed for testing the capillary electrophoresis of protein samples to determine fragment sizes within samples.

Description:
Bioanalytical laboratory needed for testing of anti-inflammatory and anti-cancer activities in some plant extracts.

Description:
Toxicology Laboratory needed in Canada for toxicity testing of a multivitamin complex.

Description:
Virology laboratory needed for testing of chemical compounds for antiviral activity against HIV, Hepatitis, Herpes, varicella virus

Description:
Analytical chemistry laboratory needed for solubility, peremability, stability, lipophilicity, dissociation constant, dissolution, cyp450, pgp

Description:
Analytical Chemistry laboratory needed to test atomic absorption and conductivity

Description:
Analytical chemistry laboratory needed for ASTM Testing Epoxy Analysis - non-contact TMA and standard DMA

Description:
Physical laboratory needed in USA for ANSI testing of new safety glasses lenses to verify they meet the ANSI Z87.1 standards.

Description:
FDA Food Toxicology laboratory in USA needed for EU REACH toxicity data on Four Inorganic Phosphate products as under: 1)Induction of gene mutations in bacteria test 2)Induction of gene mutations in mammalian cells in vitro (preferably the mouse lymphoma to assay) test 3)Induction of chromosomal aberrations in mammalian cells in vitro 4)Skin corrosion (and skin irritation in case it is not ...

Description:
Materials lab needed for testing ceramic/glass samples for a process that needs further refinement. I will submit sample parameters and the lab must run the samples and ship them to me for inspection.

Description:
Metallurgical laboratory needed for USP ICP-MS testing for zinc metal from soil - icp-ms.

Description:
ISO laboratory needed for ASTM and ISO quality testing of raw materials and finished prouct testing of orthopadics appliance,textile knitted products,artifical limb etc

Description:
FDA GLP preclinical toxicology lab needed in USA for drug efficacy testing in GLP study with monkeys. The study involves irradiating the monkeys and testing the efficacy of a drug for acute radiation syndrome. The monkeys will receive a non-lethal dose of radiation of about 500 Gy. Blood analysis will be performed about every 3 day following radiation until recovery.

Description:
Analytical Chemistry Laboratory needed for pH determination testing of wet towelette

Description:
Analytical chemistry laboratory needed for EPA GC/MS testing of Methyl Iodide by EPA SW 846

Description:
Bioanalytical laboratory needed to analyze protein hydrolyzed products, preferably by HPLC or LC/MS methods - amino acid analysis. Capable of performing Pre or post-column derivatization.

Description:
Analytical chemistry laboratory needed for non-destructive testing of 7 braided samples size #2, roughly a meter in length to to identify braid construction, identify fiber components (i.e. PET, polypropylene, polyethylene), if Spectra present, confirm it is chain extended UHMWPE or not.

Description:
FDA GLP Preclincial laboratory needed for clinical testing by RT-PCR-based assay to quantitate viral sequence in support of investigative new drug. Method is developed but would need to be validated by laboratory.

Description:
Analytical chemistry laboratory needed for a compound analysis for ratio of active (antibiotic) to inactive ingredients. Only two ingredients are in the compound. I believe this is done via HPLC and there is a published method.

Description:
Analytical chemistry laboratory needed for osmolality measurement of a opthalmic solution.

Description:
Toxicology laboratory needed to test chess sets made from pewter to see what levels of lead are acceptable. Also I want to test for general product saftey. These sets aren't marketed for children but may be in a home with children. I want to be able to know what age warning should be on the packaging to properly warn parents of potential dangers.

Description:
Food microbiology laboratory needed for aerobic plate count and coliform testing

Description:
Analytical chemistry toxicology laboratory needed to test blended plant based hydrosols. Will need product safety data for FDA.

Description:
Bioanalytical laboratory needed for acetyl CoA carboxylase inhibitors to see if they have the ability to inhibit this enzyme in cells by looking at effects on FA oxidation and FA synthesis. We can provide positive controls.

Description:
FDA GLP/GMP Analytical Chemistry laboratory needed for Iron and Copper analysis by high resolution ICP-MS (low ppb LOQ)

Description:
Physical laboratory needed for compressive resistance testing carried out on EPS rigid foam board

Description:
Geotechnical laboratory needed for testing Cherts and siliceous rock, basalts and obsidians for trace elements (roughly 20). Need to know cost, how much material, and how it needs to be prepared and submitted. This for archaeological provenancing in British Columbia, Canada.

Description:
Microbiology toxicity laboratory needed to test if once the surface is coated with this antibacterial coating how quickly will it reduce V.R.E on a surface Clostriuduim Difficile (as a spore not in a vegetative state)and we would also like to see if it is efectice against spider mites, head lice and even T.B. Is there also a possibility of having a toxicity analysis of the product?

Description:
Analytical chemistry laboratory needed for testing a food seasoning for a conch fritter batter to preserve for freezer life and refrigerator life

Description:
Food Analytical chemistry laboratory needed in Florida for plant nutrition analysis, ie: Nitrogen,Calcium, Magnesium, Phosphorous etc. Need to make sure plants are getting the right amount of feed. These are green house hydroponically grown tomaotes

Description:
Analytical Chemistry laboratory needed for analysis of urine samples for SPMA benzene marker

Description:
Pharmaceutical Analytical Chemistry laboratory needed for analysis of vitamin/mineral products and some herbs with markers. We will also need micro. Please send us your price list and whatever additional material you can.

Description:
Food analytical chemistry laboratory needed for foor organoleptic testing and chemical testing

Description:
PreclinicalBioanalytical laboratory needed to test receptor binding assays for 5HT2A, 5HT2C, 5HT1A, alpha 1, M1, H1, 5HTT and NET receptors

Description:
Textiles Laboratory needed for International Marine Organization testing of 100% Polyester FR fabrics for use on an International Oil Rig and they require documentation before purchasing. We would need these tests done rather quickly. I would need to know how much of each pattern and where to send for testing.International Marine Organization - IMO standard (A 652) 8.2 and 8.3.

Description:
FDA GMP Bioanalytical laboratory needed for testing plasma levels of atorvastatin with validated methods in clinical trial

Description:
Analytical Chemistry Laboratory needed for urgent contract testing with a tube or microplate luminometer preferably with an automatic reagent injector of three samples according to four specific assays with all reagents and methodology provided.

Description:
Analytical Chemistry Laboratory needed for testing O/W emulsion for antioxidant activity using 4 assays (halogenated oxidants, peroxynitrate, haloxyl radical and superoxide). As our tests have been already completed by anoher lab, we would prefer the contract lab (who we are using confirm results) to use a kit containing reagents, methodology and results information etc. to provide repeatable resu ...

Description:
Analytical Chemistry Laboratory needed for testing of emission of volatile organic compounds for wood plastic composite use for make door frame.

Description:
Physical laboratory needed flammability testing of bed linen for Canada and U.S. requirements.

Description:
Physical laboratory needed for impact test for a wired glass specimen

Description:
Analytical chemistry laboratory needed to for testing 2 glycerol samples from biodiesel facility for impurities.

Description:
Materials laboratory needed to test PVC sheet vinyl roofing membrane

Description:
Food analytical chemistry laboratory needed for testing food samples for catechin levels

Description:
Analytical chemistry laboratory needed to test three aqueous solutions that are unknown to find out what they are and if they have any impurities in them.

Description:
Analytical chemistry laboratory needed for testing antibiotic drug levels (for potentially three different antibiotics) from dried blood samples on filter paper (the same porcedure as is done for State newborn screening programs to detect metabolic disorders) Planned analysis of antibiotic drug levels is by tandem mass spec

Description:
Analytical chemistry laboratory needed to test zonolite insulation for asbestos. Need to know cost and how it will be sent.

Description:
FDA GMP Bioanalytical laboratory needed to test human plasma methotrexate concentrations

Description:
Product safety laboratory needed for electrical energy saving devices - main component is coil.

Description:
Analytical chemistry laboratory needed to test our formulation for the following excipients - histidine and methionine

Description:
Analytical chemistry laboratory needed for whey protein nitrogen index determination.

Description:
Analytical chemistry laboratory needed to test the following: 1]CONGELING POINT, ASTMD-934 2]DENSTY @15C,Kg/M ASTMD-1298 3]FLASH PONT C ASTMD-93 4]MELTNG PONT C ASTMD-87 5]OIL CONTENT WT% ASTMD-721 6]SPEFIC GRAVITY @70C ASTMD-1298 7]KNEMETIC VISCOSITY @100C ASTMD-445

Description:
Pharmaceutical laboratory needed by lab that can test efficacy of drug candidates against Apicomplexan parasites, e.g., plasmodium (malaria), toxoplasma (toxoplasmosis), cryptosporidium (cryptosporidiosis), neospora, sarcystis, etc.

Description:
FDA GMP / GLP Bioanalytical laboratory needed for bioidentity test for incoming USP monograph for Calcitonin Salmon

Description:
Analytical chemistry laboratory needed for detection of the osmotic pressure (e.g. measured against water) for six samples. Sample solutions consists of cell culture medium, insect cell fragments like proteins and insect viruses (the baculovirus AcMNPV; infective solely for some moths). Useful but not urgent would be the detection of density and viscosity for those six samples additionally.

Description:
Bioanalytical laboratory needed to test for assay for Sodium Sulfate USP

Description:
Analytical chemistry laboratory needed to test tape water used in conjunction with our salt spray chamber.

Description:
Toxicology laboratory needed to test a polyester drawn, textured material that I would like to use to hang salami meats while they cure. I need to present a material analysis to validate that the material is safe to be exposed to a food product.

Description:
Analytical chemistry laboratory needed to test flammability of bedding textiles in accordance with Canadian and U.S. Standards

Description:
Analytical chemistry laboratory needed for testing skin absorbption/leech qualities of nano finished textiles intended to have skin and mouth contact with newborns and newborns with skin senstivity or weakened immune systems.

Description:
Physical laboratory needed for biocompatability testing of devices - Iso 10993-5, ISO 10993-10

Description:
Analytical chemistry laboratory needed for organic paddy testing

Description:
Food analytical chemistry laboratory for nutritional testing for nutritional information

Description:
Analytical chemistry laboratory needed for glycerine in water analysis required using GC/MS; most likely at low percent levels

Description:
Acoustics laboratory needed to evaluate the Sound Transmission Criteria (STC) rating that a condominium building that is in a 90% finished state will achieve at its current state.

Description:
Preclinical laboratory needed for in-vivo efficacy evaluation of potential cancer therapies, utilizing rat or mice xenograft tumor models

Description:
Microbiological laboratory needed for biological activity testing of activities like anti-inflammatory, anti-cancer in substances of natural origin such as plant extract

Description:
Electrical laboratory needed for dielectric breakdown test -applying 15,000 volts direct current with breakdown. The mmaterial is protective caps for electrical connectors.

Description:
Food analytical chemistry laboratory needed for sterol glucosides testing in oil palm. food annalytical chemistry needed for nutritional tetsing including essential fatty acids content and nutritional compounds of eggs. Food laboratory needed for antioxidation assay testing via ORCE method, ABTS methods, or DPPH method on cereal grain samples. Analytical chemistry on soya beans , wheat offals and ...

Description:
Analytical chemistry laboratory needed for FAB-MS analysis to my samples (coordination compounds)

Description:
Food analytical chemistry laboratory needed to obtain nutritional information for food labelling.

Description:
Analytical chemistry laboratory needed for testing reactions of buffered sodium chlorite solutions with various oxidants. UV spectrophotometer required.

Description:
Analytical chemistry laboratory needed to test the Volatile Sulfur Compounds in industrial alcohol (96%EtOH). Use of chemiluminescence detector on GC

Description:
Materials laboratory needed to test for the mean particle size, oil absorption, crystal shape, top cut

Description:
Analytical chemistry laboratory needed to test the molybdenite recoveries for various grades of ore.

Description:
Bioanalytical laboratory needed to test some formulas for "kill rates" of sexually transmitted diseases

Description:
Microbiology laboratory needed to test kill rates for STD's

Description:
Analytical chemistry laboratory to quantify the oil (triacylglycerides or neutral lipids) content in Arabidopsis seeds. Below are two protocols from the Methods and Materials section of different manuscripts that describe the type of lipid analysis in which we are interested. 1) Hobbs et al. (2004) Plant Phsyiol 136;3341-3349 2) Focks and Benning (1998) Plant Physiol. 118:91-101. Please ...

Description:
Analytical chemistry laboratory needed to test total petroleum hydrocarbons - polycyclicaromatic hydrocarbons

Description:
Analytical chemistry laboratory needed to test total petroleum hydrocarbons,PAHS

Description:
Analytical chemistry laboratory needed to see if quality - percentage of alfalfa present. Aflatoxin levels, reason for decomposure.

Description:
Analytical chemistry laboratory needed to test prussic acid

Description:
Forensic toxicology laboratory needed to test the vistaril (hydroxyzine) content of one gastric contents specimen. Mass spec method of analysis preferred. Regulatory legal matter may also require followup testimony. IMMEDIATE NEED.

Description:
Bioanalytical laboratory needed for two different assays: 1) A direct effect of our compound on the phosphorylation of AKT. This would most likely be a test tube based assay. 2)An indirect, cell based assay which would test our compounds effect on phosphorylation by activating the PI3K pathway through either the IRK pathway (tyrosine kinase) or the guanylyl cyclase pathway (signal transduct ...

Description:
Analytical chemistry laboratory needed to test hydraulic conductivity of sand sample

Description:
Analytical chemistry laboratory needed to test prototype coated fabric for transportation of milk. Need to test for heavy metals (e.g., Cd, Pb, Hg) and for bisphenol A in fabric. They are also requesting the assessment of the Evaporation Residue Test per the specification on Page 86 of rhe JETRO document.

Description:
Analytical chemistry laboratory needed for OECD biodegradability testing on a consumer cleaning product. I believe the most applicable test would be OECD 301 C Readily Biodegradable.

Description:
Microbiology laboratory needed for cell culture analysis on 96 well and 24 well plates using the MDCK cell line incorporating quantification of results using Lucifer yellow rejection or TEER's measurement

Description:
Pharmaceutical FDA GLP clinical contract research organization needed for clinical research Phase 2,3,4 trials of US/Eropian FDA levels.

Description:
FDA GMP Bioanalytical laboratory needed for testing of vitamins & antibiotic assay.

Description:
Analytical chemistry laboratory needed for samples we send out made of the raw NaClO2 for QC testing for moisture content by coulometric Karl Fischer analysis. We are a manufacturer of in situ chlorine dioxide generators. We are purchasing 3000 lbs. of our primary raw chemical, 80% technical grade sodium chlorite. We contract-process this witha flow agent to create a mixed blend which also requir ...

Description:
Analytical chemistry laboratory needed to test compounds we have to be screened to determine its activity against HCV and toxicity

Description:
Analytical chemistry laboratory needed for 0.9% sodium chloride assay (chloride assay)testing

Description:
FDA GMP Preclinical laboratory needed to perform slow infusion study in rat or dog model combined with subcutaneous blood flow measurement.

Description:
Microbiology laboratory needed to test Myeloperoxidase Il6 TNFa

Description:
Preclinical laboratory needed in evaluating the safety of aluminum adjuvanted vaccine delivered intradermally utlizing a novel microneedle/injection technology. Specific parameters to test: Injection site reaction (measure size of granuloma, % of site that has granuloma, etc.) Use 2 Controls: 1) saline only; 2) needle/syringe We may also be interested in conducting an evaluation of dept ...

Description:
Microbiology laboratory needed to have Salmonella identified. We want it identified down to the subspecies and serovar level. We need to have the organism typed for antigens.

Description:
Materials laboratory needed for Certificate of Analysis on grease per MIL-G-18709

Description:
Analytical chemistry laboratory needed to test the fecal odour and evaluation of ethicacy of a odour reduction agent we've developed.

Description:
SEM imaging laboratory needed for testing that has up to a magnification of x1000 of an acrylic sample. The samples are not required to be recovered after coating.

Description:
Bioanalytical laboratory needed for Enzyme analysis

Description:
Food analytical chemistry laboratory needed to test for the nutitional content of a coffee beverage

Description:
Analytical chemistry laboratory needed to test the echinacoside levels in our Echinacea root (dry root)

Description:
Analytical chemistry laboratory needed to test glycerine purity, water content, methanol and organic compounds

Description:
Analytical chemistry laboratory needed for the analysis of a product for 6 phthalates (% by weight): DBP, BBP, DEHP, DINP, DNOP, DIDP

Description:
Biophysical laboratory needed for testing to ISO 7886

Description:
Materials laboratory needed for testing of light transmittance in transparent armor

Description:
Bioanalytical laboratory needed for Pk evaluation of a generic test substance (amoxicillin) in dogs and a reference listed drug

Description:
Analytical chemistry laboratory needed for determination of total fluorine concentration, expected to be <100 ppm, in solid sample of inorganic lime (i.e. calcium hydroxide).

Description:
Analytical chemistry laboratory needed to test various commodities of food like ground spices, veg. oil, ghee besan etc.

Description:
Bioanalytical laboratory needed to perform Renin analysis in monkey plasma samples

Description:
Clinical laboratory needed to test Binary HPLC of clinical blood samples. Some sample prep bench work required.

Description:
Analytical chemistry laboratory needed for analysis of trans fat,rancidity and shelf life

Description:
Bioanalytical laboratory needed for completion of a variety of Haemostasis assays on a range automated coagulation analysers (can and will be provided)prmarily in the area of PT and APTT tests on control plasmas.

Description:
Analytical chemistry laboratory needed to test an autoclave table top steam sterilizer to ANSI/AAMI ST55. We have a 510(k) submission in process and need to meet this standard.

Description:
Analytical chemistry laboratory needed for Environmental Risk assessment - Phase 2 Tier A base set

Description:
Biochemical laboratory needed for Dew Point Analysis of the gas compositions.

Description:
Biochemical laboratory needed to test Avgas 100LL to recertify for aviation use at small airport. Product is 15 months old. 2,000 gallons of product sitting in 6,000 gallon tank with no activity.

Description:
Analytical chemistry laboratory needed to test UV fade resistance & durability of printed samples

Description:
Food microbiology laboratory needed to test sample of pork in salt/vinegar solution to be tested for E.coli,coloform, acidity, water activity

Description:
Toxicology laboratory needed for huam patch test for topical skin care formula compariosin including desquamation evaluation. 5-days duration.

Description:
Analytical chemistry laboratory needed for determination of VOC on materials that are thermally unstable at EPA Method 24 temperatures.

Description:
Materials laboratory needed to determine the denier and twists per inch of the core nylon floss used - a variety of individual strings and brands of classical guitar strings. We will send multiple samples.

Description:
Analytical chemistry laboratory needed for Powder Tap Density Testing Particle size distribution

Description:
Serology laboratory needed to perform serum and/or urine electrophoresis testing.

Description:
Acoustics laboratory needed for verification of casting soundness - ie lack of porosity

Description:
Food analytical chemistry laboratory needed to test potassium levels in potatoes

Description:
Analytical chemistry laboratory needed for dissolution apparatus, UV, HPLC, DSC

Description:
Food analytical chemistry laboratory needed for all data of all food colors extinction co-efficients and lambda max

Description:
Food microbiology laboratory needed to extract and concentrate bioactive ingredient from natural source for nutriceutical (liquid and powder formation)

Description:
Biotechnology laboratory needed for the following: Construction and screening of partially random (15, site specific randomization in 45 nucleotide long sequences) oligonucleotide expression libraries for specific protein-protein interactions. Testing Requirements: 1., Oligonucleotide (~ 40-50 bases long) syntheses, and random mutagenesis at every third (defied) positions. 2., Oligonucle ...

Description:
Analytical chemistry laboratory needed for the following: Complete Specification to determine the following: 1. Free Fatty Acid 2. Moisture and Impurities 3. Iodine Value 4. Colour 5. Melting Point 6. Saponificable Matter 7. Total Fatty Matter

Description:
Food analytical chemistry laboratory needed for nutritional analysis

Description:
Bioanalytical laboratory needed to test for Brain Lactate by Magnetic Resonance Spectroscopy in dogs as soon as possible.

Description:
Microbiology laboratory needed for an inoculation test done using 2 samples and a control to evaluate it effectiveness in controlling E.coli (not 0157 strain).

Description:
Physical laboratory needed to do crush testing on various size Core Tubes used in our Boxboard Manufacturing Process.

Description:
Food analytical chemistry laboratory needed for Nutritional values testing to comply with mandatory labeling in Canada.

Description:
ISO analytical chemistry lab needed for analysis of iodophore

Description:
FDA GMP food packaging, product safety lab needed for food packaging approval testing to ensure it is food safe

Description:
FDA GMP or GLP analytical chemistry lab needed for NMR analysis

Description:
Microbiology lab needed for microbiological testing for e coli

Description:
Food product safety and toxicology laboratory needed for food GRAS testing of edible dye to ensure it is a safe Food color for human consumption. We have to submit its summary for certification. We are interested to conduct folowing toxicity studies the dye, Red SA. Acute toxicity studies Genetic toxicology Metabolism Pharmacokinetics studies Sub-chronic Toxicity studies Chronic toxicity ...

Description:
Analytical Chemistry Laboratory needed for testing Oil Content From Jojoba Seeds

Description:
Materials ab needed for ASTM Testing: Impact attenuation of surfacing materials within the use zone of playground equipment

Description:
Analytical Chemsitry Laboratory needed for USP Raw Material Testing of Steaic Acid-- Asssy Caffeine---OVI Saccharin Sodium Limit of Toluensulfonamides & OVI

Description:
Analytical Chemistry Laboratory needed for Testing for "Nitrosamine Content" for raw material:Triethanolamine 99%.

Description:
Bioanalytical laboratory needed for Liquid chromatographic-electrospray ionizaion-tandem mass spectrometry (LC/MS/MS) assay that measures the following compounds simultaneously: naloxone, common opiods (morphine, fentanyl, hydromorphone) and their major metabolites.

Description:
Food analytical chemistry laboratory needed for stability testing to determine shelf life of peanut butter, chocholate peanut butter fondue and peanut brittle

Description:
Food analytical chemistry laboratory neesed for testing Midget Raisins - need capstems, count/lb, moisture, light filth, heavy filth, stems, extraneous material, underdeveloped, sugared.

Description:
Analytical Chemistry Laboratory needed for USP29 testing of Lactose.

Description:
EPA environmental laboratory needed for wastewater testing: BOD Total suspended solids Total phosphorus Total nitrogen Fecal coliforms Settleable solids Oil and grease Regards, Vivi

Description:
Analytical Chemistry Laboratory needed for ppm level quantification testing of xanthan gum

Description:
Environmental analytical chemistry laboratory needed for soil texture classification. We have the soil samples to be tested.

Description:
Analytical chemistry laboratory needed for technetium-based compound testing

Description:
Analytical chemistry needed to test several fragrances to verify their biodegradability, using the "closed bottle test " or 301 d Our fragrances are used in the Personal Care and Detergent industry

Description:
Food analytical chemistry laboratory needed to test the ingredients of pizza dough

Description:
Physical laboratory needed to test the increased abdominal muscle contraction using our abdominal device vs. doing a standard sit-up. This may be accomplished by performing sit-us/crunches with the AB Maximizer utilizing EMG.

Description:
FDA GMP Preclinical laboratory needed for efficacy testing of compound in Alzheimer model -cholinergic lesion model

Description:
Microbiology laboratory needed for micro test services for a MRSA

Description:
Bioanalytical laboratory needed to perform an enzyme activity test on a powdered plant fiber. This is a basic screen to determine if any enzymes are present.

Description:
Analytical chemistry laboratory needed for Industrial Hygiene/risk assesment mainly on: Airborne chemical substance (VOC,PNA, Benzene..), Dust, Indoor air quality, Noise exposure,Bioaerosol, Ergonomics.

Description:
Product safety laboratory needed to perform testing in accordance with all ASHRAE Standards 34-2007 for refrigerant classification for a US company that produces a hydrocarbon blend refrigerant

Description:
Analytical chemistry laboratory needed to test a new disinfectant for EPA registration purposes - we have people in Phoenix and Tampa who can supply appropriate samples

Description:
FTIR microimaging - spectroscopy laboratory needed to test infrared ATR imaging experiments on contact lenses and layered contact lenses.

Description:
Analytical chemistry labneeded to for testing nitrogen trichloride in chlorine stream

Description:
Microbiology lab needed for microbial testing for testing mold in a shipment of gloves from Pakistan which was damp is hazardous

Description:
Bioanalytical laboratory needed for HLPC testing for tetrahydrobiopterin concentration in biological tissue

Description:
Analytical chemistry laboratory needed for ASTM testing an amount of Water in Dibutyl Phthalate - Testing unit: wt% Testing method: ASTM E 1064

Description:
Materials laboratory needed for testing PMI finished parts

Description:
Analytical chemistry labneeded for moisture content testing of Aspen Lumber of 1 inch thickness.

Description:
For (1) powdered sample of carbon nanotubes: 1) TEM 2) SEM + EDX for C,O,Ni, La 3) BET surface area 4) TGA for purity 5) ICP-AES for C,O, Ni,La

Description:
Preclinical laboratory needed for radio labelling of antibody fragment and testing biodistribution following tail-vein injection

Description:
Biochemical laboratory needed to test a few (~5) samples of LNAPL (mostly No. 2 fuel oil) from monitoring wells at a former oil terminal. ASTM D3286-85 ASTM D1744-92 ASTM D1963-85 ASTM D2887-06a ASTM D445 ASTM D3286-85. Samples from South Boston site.

Description:
Analytical chemistry laboratory needed for flash point test usp and ep - flash point test by tag closed cup and open cup tester

Description:
FDA GMP ISOAnalytical chemistry laboratory needed to do the following testing: SPF Testing UVA testing Cosmetic Safety testing Antiperspirants & Deodorant efficacy Hair care - efficacy for shampoos, conditioners and styling.

Description:
Microbiology laboratory needed to conduct microbial and fungal sterility testing and LAL endotoxin testing of our cell therapy product in Chicago.

Description:
Analytical chemistry laboratory needed to test supply of Red Yeast Extract which needs reassaying to determine whether or not it is still at a 0.4% lovastatin/monacolin K active level.We have had the supply tested for contaminants and do not need this redone. Can you do this for us,if so,at what cost,and how many grammes are required for a test.

Description:
Microbiology laboratory needed to do bacteriological testing on some wellsites asap.

Description:
Analytical chemistry laboratory needed to test SW-6010B lead analysis of soil samples.

Description:
Metallurgical laboratory needed to do testing on scrap metals - Gold,Platinum,Palladium,Silver etc Quantities

Description:
Physical laboratory needed to test the following: 1)oven aging stability of polypropylene samples. 2)Wether-O-meter stability of polypropylene samples.

Description:
Automotive laboratory needed for parts validation testing.

Description:
Microbiology laboratory needed to test samples against microbs.

Description:
Microbiology laboratory needed for ASTM Testing: ASTM D5511-02, Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions?

Description:
FDA GLP Analytical Chemistry Laboratory needed for USP, GLP NMR spectroscopic profiling of complex botanical extracts in combination with statistical data analysis, PCA

Description:
FDA GMP Cell Biology Lab needed for testing to characterize a bacterial master cell bank, results will be part of a regulatory dossier. I need bulk-part estimates within 2 weeks for budgeting purposes

Description:
FDA GMP Analytical Chemistry Laboratory needed for USP testing of organic volatile impurities in sucrose, sodium acetate anh., magnesium sulfate heptahydrate according to USP (467)

Description:
Analytical Chemistry Laboratory needed for Gas-Chromatography Testing: Approx 7-10 samples.Mostly water matrix (97+%). Need quantitative amounts of methanol, ethanol, isopropanol, n-propanol, sec-butanol, isobutanol, n-butanol(C4OH), C6OH, C8OH, C10OH, C12OH, C14OH, C16OH, C18OH, glycerol, C6ME C8ME, C10ME, and C12ME. Where ME stands for methyl ester. C18OH stands for C18 alcohol, etc.

Description:
Analytical Chemistry Lab needed for analysis of microencapsulated compound for major/minor components: pesticide analysis, polymer structure & functional groups,pcbs, radioactivity

Description:
Geotechnical materials laboratory needed for ASTM testing ASTM C 1531-03 & ASTM C1072-05 on solid concrete block 6" X 8" X 16"

Description:
Electical Laboratory needed for IEC 60601 2-2 Testing of a Monopolar Probe for 510(k)

Description:
Materials laboratory needed for Radiopacity testing to ASTM F 640 of Plastic Medical components

Description:
Analytical Chemistry Laboratory needed for all ASHRAE testing of a hydrocarbon blend refrigerant to be submitted to ASHRAE under Standard 34-3007

Description:
FDA GLP analytical chemistry laboratory for testing for amount of calcium in an extracted solution

Description:
GLP Toxicology Laboratory needed for toxicology testing according to GHS in different countries

Description:
FDA GMP Analytical Chemistry Laboratory needed for USP Potency assay testing for Indium sulfate used in food grade preparation. Heavy Metal panel (USP)

Description:
Analytical Chemistry Laboratory needed for testing total Arsenic content in various petroleum feedstocks. If test results meet our needs, this would be continuous business for the laboratory.

Description:
Metallurgical Laboratory needed for testing for Fe level in processed iron ore sample

Description:
ISO 17025 Analytical Chemistry Laboratory needed for metals and VOCs testing in filters or sorbent tubes

Description:
Food analytical chemistry laboratory needed for essential oil analysis of specific target compounds. Quantitate levels of eight specific compounds.

Description:
Environmental laboratory needed for conductivity testing and TOC testing (5-10 ppb) water analysis

Description:
Analytical chemistry laboratory needed for wax contents on vegetable oil samples ranging from 10-400 ppm of wax.

Description:
Analytical Chemistry laboratory needed to test for low vapor pressure of paint remover according to CARB 310

Description:
Bioanalytical laboratory needed for analysis of 384 dog plasma samples and analysis of 384 cat plasma samples for the concentration of Amoxicillin.

Description:
Microbiology and Analytical Chemistry laboratory needed for testing on NHPs including sterility, microbiology and heavy metal tests.

Description:
Analytical chemistry laboratory needed to test the dielectric measurement on sodium lignosulfonate solution ~50% solids.

Description:
GLP Toxicology laboratory needed for in vivo toxicology of liposome vesicles Immunotoxicity 28 day screen Immunogenicity (repeat-dose tox study) Dose -Range Finding Toxicity Blood Chemistry Hematology Histopathology Gross Pathology GLP Studies PK/ADME Expanded Single Dose Acute Tox

Description:
Food analytical chemistry laboratory needed to test cocentrations of phenolic compounds in smoked seafood

Description:
Bioanalytical laboratory needed for Toxicology:(LD50); aquatic toxicity (LC50, EC50) for fish, daphne and algae; for MSDS management of enzymes.

Description:
Mechanical laboratory needed to test electronic instrument to be certified for DO160 to be used in an Aircraft.

Description:
Analytical Chemistry laboratory needed to measure permeability or the transmission rate of hydrogen sulphide gas through 1.0mm thick film of polyethylene

Description:
Analytical chemistry laboratory needed for USP Test for "FOREIGN SUBSTANCES" in "LANOLIN".

Description:
Materials laboratory needed to test environmental qualification of electrical diode. I have a Statement of Work and diode specification information - can be supplied based on test house contact.

Description:
Food analytical chemistry lab needed for deformulation testing in garlic and herb sauce

Description:
Bioanalytical laboratory needed to test cytokine Levels and production

Description:
Analytical chemistry laboratory needed to test for color dye

Description:
Food analytical chemistry laboratory needed for dissection of garlic and herb sauce to indicate ingredients in terms of consistency, amount, content and if possible what product or product type is used.

Description:
Analytical Chemistry laboratory needed for testing of compounds for agonist and antagonist activity on PPARs

Description:
Bioanalytical laboratory needed to test smear samples for quantifification of Cs-137 contamination. Samples will be sent to lab.

Description:
Bioanalytical laboratory needed to test neuroprotective compound for CRO of amyloid beta based Alzheimer model. We would like to test one of our compounds and its major metabolite in an amyloid beta protein based Alzheimer model. We know the compound is neuroprotective by activation of hyperpolarizing ion channels and also by protecting mitochondrial function. We do not know if there is a direct i ...

Description:
Analytical chemistry laboratory needed for the chemical analysis of aluminum furnace sample as per MIL-A-24779(SH)

Description:
Food analytical chemistry laboratory needed for olive oil test that would verify it will pass the FDA test as well as an overall purity test

Description:
Physical laboratory needed to determine the hardness and/or abrasive nature of sand sized particulate material suspect that a Tabler multi-media abraser might be the instrument of choice

Description:
Biochemical laboratory needed to perform a DIN 51794 autoignition temperature test on a petroleum based heat transfer fluid.

Description:
Food analytical chemistry laboratory needed for Glycemic testing

Description:
FDA GLP and AAALAC food toxicology laboratory for testing the upper limit of where camelina meal will produce some toxicological outcome in poultry. Because of glucosinolates, this will require thyroid hormone testing, weight gain, analysis of liver problems, standard pathology. Primarily interested in broilers, but may need to do layers in a followup study.

Description:
Mechanical laboratory needed for ASTM tensile test - pull testing at 51 ft/sec

Description:
Analytical chemistry laboratory needed to do the Mossbauer and VSM tests for a sample of magnetic fluid (ferrofluid).

Description:
Analytical chemistry laboratory needed for a full panel of pharmaceutical testing for a pending court case.

Description:
Analytical chemistry laboratory needed for a number of sun tan samples to asertain if they are still good for resale.

Description:
Food analytical chemistry laboratory needed for testing the following so we can have a print out for our products: Energy (kcal) Protein (g) Fat (g) Carbohydrate (g) Dietary fiber (g) Sodium (mg) Calcium (mg) Iron (mg) Vitamin A (µg) Magnesium (mg) Zinc (mg) Lead (mg) Manganese (mg) Vitamin D (µg) Vitamin E (mg) Vitamin B1 (mg) Vitamin B2 (mg) Niacin (mg) Vitamin B6 (mg) Vit ...

Description:
Product safety laboratory needed for hazardous products testing, lead content in paint, flammability, mechanical hazards, etc. Requesting detail for specific tests required for marketing a mechanical plush toy in Canada.

Description:
Bioanalytical laboratory needed for AE4 Allele Screen s100 Beta testing

Description:
Physical laboratory needed for support in doing ISO test for intraocular silicon devices

Description:
Analytical chemistry laboratory needed to conduct JASS 12 test method. It is a Japanese standard and evaluates water leakage on nail puncture underlay.

Description:
Analytical chemistry laboratory needed to test CO2 levels in a sealed plastic topped

Description:
Bioanalytical laboratory needed for measuring Irinotecan in biological fluids using established bioanalytical methods

Description:
Analytical chemistry laboratory needed for more extensive and science based testing of an innovative fertilizer dispenser which will significantly reduce water and fertilizer requirements.

Description:
Physical laboratories (1-2) needed to test our RFID chips. These 2.45 GHz chips are only .4mm square are impervious to gamma ray sterilization. Hitachi will provide the RFID readers and chips at no charge.

Description:
Analytical chemistry laboratory needed for biodegradation test on our product (Soybean oil derivative) requested by EPA. Testing methods: OPPTS 835.3110 (Preferred protocol) or OECD 310B

Description:
Microbiology laboratory needed to analyze nitrate nutrient solution in water to determine bacterial growth from the nutrient versus competition

Description:
Metallurgical laboratory needed to test grain size and boundary of copper samples

Description:
Analytical chemistry laboratory needed for soil degradation, water-sediment studies, photolyses, leaching studies, adsorption-desorption studies

Description:
Bioanalytical laboratory needed for detection of dnase, rnase, and protease in water

Description:
Food analytical chemistry laboratory needed to see if calcium is present in tomato juice, Carrot juice, Lemon juice, Orange juice and Radish juice.

Description:
Analytical chemistry laboratory needed for non-destructive evaluation, gas turbine life assessment and fatigue creep stress rupture

Description:
Analytical chemistry laboratory needed for heavy metal testing of water based solution for Aluminum

Description:
Analytical chemistry laboratory needed to test polyurethane foam samples for UL94 - HBF rating

Description:
Analytical laboratory needed for the following tests: 1.primary skin irritation test - animal study 2.ocular irritation 3.dermal sensitization assay-animal study 4.acute oral toxicity ( limit test) 5.Intracutaneous reactivity 6.cytotoxicity test 7.local-lymph node assay 8.modified draize -95 test ( product claim FDA) 9.human repeat insult patch test ( pr ...

Description:
USA FDA GLP preclinical biomedical lab needed for canine IL-6 and TNF-a level testing in serum

Description:
USA environmental microbiology lab needed for testing for Rate of degradation of propylene glycol by bacteria and the Lethal BOD amount for bugs.

Description:
USA Manufacturer of Endoscopy replacement insertion tubes needs FDA GMP biomedical lab needs for compatibiity testing using a Sterrid NX sterlizer. A minumum of 200 cycles will be required!

Description:
Microbiology lab needed for microbiological challenge testing to assess the ability of Sparkling beverage to support the growth of spoilage organisms or pathogens. And to validate of preservatives blend that are intended to deliver some degree of lethality against a target organism or group of target organism.

Description:
USA Preclinical laboratory needed for non-GLP liquid scintillation testing to determine radioactivity (C14) levels in fractions produced from an LC run. Approximately 125 samples to be tested.

Description:
Materials lab needed for ASTM testing of Recycled used oil to ASTM 9075

Description:
USA or Canada biochemical laboratory needed for ASTM F640-07 Standard for Radiopacity testing for medical catheter, with quantitative results.

Description:
Europe GLP bioanalytical lab needed for quantitative measurement of Irinotecan in biological fluids

Description:
UK Analytical Chemistry Lab needed for quantification testing of recovered fluorescent tracers (eg UVITEX OB), relative to an agricultural spray tank mix (emulsion/suspension).

Description:
Packaging lab needed for conducting Environmental Chamber Studies. Three studies ranging from 1 to 6 months. Approximately 2 skids worth of packaging products. A 10'x 10' walk-in chamber would be ideal, but not mandatory. Please, call for further details.

Description:
TOXICOLOGY LAB NEEDED FOR USP TOXICITY TEST TO BE CARRIED OUT IN BLOW EXTRUDED HDPE MOULDED BOTTLES.

Description:
FDA GMP, GLP, and ISO analytical chemistyr lab needed for GC-MS testing

Description:
Microbiology Lab needed for antimicrobial testing for gram negative and gram positive bacteria and fungal pathogens

Description:
Analytical Chemistry Lab needed for deformulation testing of a bath crystal product

Description:
Southern Califronia Analytical chemistry laboratory needed for GC with MS

Description:
Analytical chemistry laboratory needed for pharmaceutical Real Time and Accelerated Stability Testing required for immunoglobulin powder product according to ICH guidelines.

Description:
Bioanalytical laboratory needed for ASTM D 2068

Description:
Virology laboratory needed to test porcine viruses viral load and infectivity, method validation

Description:
Analytical chemistry laboratory needed to obtain the composition and "nutrition facts" data for a newly developed dietary supplement. Samples can be provided in pressed pill or powder form.

Description:
Analytical chemistry laboratory needed for head space analysis to measure the atmospheric level of hydrogen peroxide and / or C1, C2 organo hydroperoxides in a foil pouch

Description:
Toxicology laboratory needed to test Small animal (x 1 or 2 species tbd) repeat dose (chronic) x 6 mos or tbd (small molecule - (human) drug)

Description:
Analytical Chemistry Laboratory needed to test Aflatoxin B1 (AFB1) in chilli powder and groundnut (mycotoxins).

Description:
Biochemistry Laboratory needed for construction and screening of partially random (15, site specific randomization in 45 nucleotide long sequences) oligonucleotide expression libraries for specific protein-protein interactions (gene expression, cloning, proteomics).

Description:
Analytical Chemistry Laboratory needed for PGRM Assay and MIC/MBC testing for mouthwash samples - Plaque Glycolysis and Regrowth Model Assay and MIC/MBC.

Description:
Preclinical laboratory needed for efficacy testing of an HIV therapeutic in an HIV infected mammalian cell culture

Description:
Preclinical Laboratory needed to test the effect of small molecules on human HMG Co-A reductase activity

Description:
Analytical Chemistry Laboratory needed to test process liquids to determine percentage quantity of water, sulfuric acid and glucose in the solution. Assume liquid chromatography best method.

Description:
Bioanalytical Laboratory needed for analysis of 2 Bacillus thuringiensis strains for biochemistry profile and antibiotic sensitivity/resistance

Description:
Analytical Chemistry and Physical Laboratory needed to test ACID/ alkaline evaluation of fabric materials to determine if corrosion to aircraft aluminum is likely and quantity/ type of flame retardent may also be needed.

Description:
Microbiology Laboratory needed to test the anti-microbial properties of a novel bone cement using microbes that would be appropriate to the application. We would need your advice on microbe selection.

Description:
Analytical Chemistry laboratory needed to test for concentrations of active ingredients in lip balm (anhydrous). Oxybenzone, Octinoxate, Octisalate, Octocrylene, Homosalate and Avobenzone in the same formula. Also testing for the concentration of Zinc Oxide in the formula may be required.

Description:
Analytical Chemistry Laboratory needed to test polypropylene flat sheet media for filter to verify it meets USP 88 Class 6 requirements.

Description:
Hematology lab needed for the testing of in-vitro of a safe non-toxic compound against MRSA.

Description:
Microbiology lab needed for basic micro testing of beauty products - bacterial,fungal and pseudomonas. Occasional challenge testing for safety assesments.

Description:
Bioanalytical lab needed to test Sterol Glucoside (ppm)in Biodiesel(B100)

Description:
Analytical chemistry lab needed for water sampling to test heterotopic ph count, psuedomonas, total coliforms

Description:
Preclinical lab needed for efficacy study testing, an amyloid beta induced Alzheimer'd disease animal model, e.g. the APP overexpressor and other mouse models to test our compound. We are looking for an assay to test effects on dendritic structure and spine density in cortex/hippocampus as well as to test the effects of our compound on mitochondrial translocation/accumulation of the APP precur ...

Description:
Biomedical lab needed for the following ASTM testing: 1.) ASTM F2101-01 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus 2.) ASTM F2100-04 Standard Specification for Performance of Materials Used in Medical Face Masks 3.) ASTM F1862-05 Standard Test Method for Resistance of Medi ...

Description:
Bioanalytical lab needed to test a CRO able to quantify Lanosterol & Cholesterol in rodent plasma

Description:
Analytical chemistry lab needed to perform the bacterial fermentation for 100 litres to obtain the recombinant proteins

Description:
Bionalytical lab needed to perform urine testing on "Positive Results" for a variety of different drugs such as but not limited to the following drugs: AMP - Amphetamines BAR - Barbiturates BZ0 - Benzodiazepines COC - Cocaine MDMA - Ecstasy THC - Marijuana MTD - Methadone MET - Methamphetamines OPI300 - Opiates 300 OPI2000 - Opiates 2000 OXY - Oxycodone PCP - Phencyclidine P ...

Description:
Analytical chemistry lab needed to test urea 32% solution, for: Min. Max. Alkalinity as NH3 0.2 % Biuret 0.3 % Aldehyde 5 mg/kg Insolubles 20 mg/kg Phosphate (PO4) 0.5 mg/kg Calcium 0.5 mg/kg Iron 0.5 mg/kg ...

Description:
Bioanalytical lab needed for animal tissue residue testing for a specific heavy metal, must be GLP compliant and provide tesat validation

Description:
Materials lab needed for color test for powder as per ASTM D-1535.

Description:
Microbiology lab needed to obligate and facultative anerobic growth-promotion of thioglycollate sterility testing product.

Description:
Physicals lab needed to test activated alumina balls AD-101 for drying of instrument air.

Description:
Materials lab needed to prove that the films are: Garfilm PT055 - Heat Sealable Film Garfilm PS - Sealable - Peelable Film Garfilm HS - Heat Shrinkable Film Dyed film is different than the Normal Polyester Film Garfilm