Laboratory Test Requests

Description:
Oil Laboratory needed for ASTM Testing

Description:
Biological biocide manufacturer needs microbioogy and genetics laboratory for biocide testing. In the production range we have three biological insectidies and one biological fungicide a basis of the bacteria Bacillus thuringiensis ( www.bioec.rs). We need some laboratory analysis, so if your laboratory can do any of the following analysis please send us offer. Necessary analysis Identifica ...

Description:
India Electrical Laboratory needed for RFI and EMI LED Tube Light testing and certification of Led Tube light I.e.T8 led tube light. 2 numbers. 1) Minimum Starting voltage2)Input Power3)Input power factor4)Input Current Harmonics5)Input Current Crest factor6)Inrush Current protection7)Compliance to RFI & EMI norms Kindly send us the Quotation firstly.

Description:
India Oil Laboratory needed for analyse the oil fraction extracted from coal. We want to study the what percentage fraction of various range of hydrocarbons available in the liquid. Also the C,H,N,S analysis. (one sample)

Description:
Middle East Geology Laboratory needed for SEM Analysis in particulates

Description:
Eastern USA agriculture laboratory needed for apple testing that were bulk loaded into a bulk haul trailer. Apples rejected by buyer due to foul smell and animal meal like by product on fruit. Need testing to verify animal waste by product on apples..

Description:
Radiochemistry Laboratory needed for human cell mutation testing: effect of 450 rad, 120 kvA, 4 ma for 1 minute on human cell mutation

Description:
China EN accredited laboratory needed

Description:
India Physical Laboratory needed for FIRE RESISTANCE TESTING as per IMO FTP Code Part 3 Resolution A.754 (18)A.III & A.IV, International Structural Fire Protection Material Regulations

Description:
Illinois analytical chemistry and microbiology laboratory needed for identification testing and microbiology testing to identify ingredients, weight of each ingredient, microbial testing, fungal testing, dissolution rate, disintegration, assessment of shelf life"

Description:
US, Canada or Europe FDA Pharmaceutical Laboratory needed for USP Testing or White Mineral oil (Pharmacopea)against the requirements of US FDA CFR 21 172.878 - Two samples

Description:
USA materials laboratory needed for ANSI Testing to gain an ANSI Z359 fall protection certification for a single product that is a combination of existing products.

Description:
Materials Laboratory needed for optical lens testing. We have 4 sample lenses to be tested. Desired tests are: * Total percentage visible light transmission. * UV and visible spectrum transmission by wavelength. 5nm increments preferred but 10nm increments would be acceptable. * Standards reports for ANSI 80.3-2001, EN 1836:2005, AS/NZS 1067:2003

Description:
Turkey Medical Device Laboratory needed for ISO and ASTM Testing to ISO 21534, Non-active surgical implants - Joint replacement implants and ISO 21535, ISO 21535

Description:
Europe Environmental Laboratory needed for air testing. Four samples of passive air sampling CO CO2 SO2 NOx O3 VOC HAP Heavy metals Dust Eight samples of soil: Arsenic (As) Acidity (pH-H2O) Barium (Ba) Chloride (mercurometric) mg/kg dw Cadmium (Cd Sulphate (SO4) mg/kg dw Calcium (Ca) Total Petroleum Hydrocarbons Chromium (Cr) TPH (C6 - C40) Cobalt (Co) Aromatic Hydroc ...

Description:
Southern California Laboratory needed for Tourmaline stone testing and infrared heating support

Description:
India FDA Food Laboratory needed for FDA and ASTM Food Contact Testin to food contact regulation of our product Precipitated Silica as it is used indirectly in food packaging.

Description:
Asia mechanical laboratory needed for IEC Testing: Cable test for mechanical parts in IEC60502 & IEC60794 (Armoured LS0H Copper & Optics cable for railway signaling)

Description:
Asia plastics laboratory needed for plastics testing: Oxygen Transmission Rate (OTR) for plastic film Laminate plastic film

Description:
Malaysia, Singapore or India Materials Laboratory needed for ASTM Testing of Type-II Titanium Anodized surfaces of Medical devices to .ASTM G98 - 02(2009) Standard Test Method for Galling Resistance of Materials2.ASTM G195 - 08 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abrader3.ASTM G115 - 10 Standard Guide for Measuring and Reporting Friction Coefficients.4. AS ...

Description:
India Microbiology Laboratory needed for microbial identification testing of several fungal and actinomycetes culture and want to get it identified upto species level via 16s rDNA sequencing. I didn't find the fees structure for actinomycetes identification. Is it possible in your institute? In that case, can you please provide the fees structure so that i can immediately send the culture along wi ...

Description:
INndia ISO metallurgical laboratory needed for High Purity Quartz Sand Elemental analysis for Quartz Sand needed Al,B,Ca,Fe,K,Li,Mg,Mn,Na,Ti

Description:
USA, Canada, UK or Europe Contract Research Organization CRO with established mouse model of Thrombotic Microangiopathy needed for non-GLP Preclinical Pharmacology Testing. The activity of experimental test compounds shall be tested in this model

Description:
Plastics Laboratory needed for ASTM Testing: creep analysis for a plastic material per ASTM D2990, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics.

Description:
India Electrical Laboratory needed for electrical Testing of Electrical measuring instrument

Description:
Food Microbiology laboratory needed for microbiology testing: sourdough starter and i want to find out its microbiology, what yeasts and bacterias it has, and the different strains

Description:
Canada or USA FDA analytical chemistry laboratory needed for US FDA testing of white mineral oil tested against the requirements of U.S. FDA 21 CFR 172.878

Description:
Canada or USA Clinical Toxicology Laboratory needed for urine testing of Urine control solutions to be quantified for various drugs of abuse concentrations ranging from 10ng/mL to 6000ng/mL. We are interested in GC/MS or equivalent analysis and we would like to get an idea of the costs and time needed to set this up. We are interested in quantifying the following: d-amphetamine secobarbital o ...

Description:
UK ISO Toxicology Laboratory needed for Toxicology Testing: In-Vitro Cytotoxicity Testing

Description:
We are into design, manufacture and marketing of medical products that are used by healthcare establishments. We need FDA GLP and ISO Laboratory for biocompatibility tests for our medical product in your esteemed laboratory as per standard ISO 10993 (Biological Evaluation of Medical Devices). We are using silicon rubber as a raw material for our finished product fall under the category of surface ...

Description:
Consumer Products Laboratory needed for chemical exposure testing for Exposure Level of chemicals£¨TRIS TDCPP) of mattresses

Description:
Bioanalytical Laboratory needed for protein analysis, electrophoresis testing

Description:
FDA Food Laboratory needed for FDA GMP Food Testing: 6-10 samples. Product improvement. Water testing, Ph testing, shelf life testing.

Description:
Europe GLP Toxicology Laboratory needed for LC50 toxicity testing to OECD Guideline 403,OECD GUIDELINE FOR THE TESTING OF CHEMICALS Acute Inhalation Toxicity GLP using lab mice.

Description:
Southeast clinical forensics laboratory needed for DNA analysis of of biological evidence in a criminal case.

Description:
Asia metallurgical laboratory needed for metas testing. Must be able to test and verify FE%, moisture%,Specific Gravity, Proctor Density and other trace elements.

Description:
West Coast USA Food Laboratory needed for alcohol testing by volume

Description:
Midwest USA histology laboratory needed for histology testing: Paraffin embedding, sectioning, H&E staining, imaging (histology)

Description:
California Materials Laboratory needed for Spectral transmittance testing in DUV range from 190 to 400 nm at least. The sample is of fosed silica coated with SiN of thickness about 0.5 microns."

Description:
FDA GMP Laboratory needed for US FDA GMP Salicyclic Acid testing of natural products. 6 assays

Description:
Rhode Island Pharmaceutical laboratory needed for USP Testing. GC-MS, VOLTAMMETRY, LC/MS/MS, HPLC, HPLC/ESI-MS/MS, HPLC/MS/MS . Complying with USP 797 standards, need testing for hazardous drugs testing on surfaces and areas adjacent to hazardous drug (chemo) preparation

Description:
USA FDA GMP Food Laboratory needed for folic acid testing

Description:
Europe Electrical Laboratory needed for IEC Voltage Testing to IEC 60243 for dielectric properties of the insulating coating applied on a substrate of Ti alloy.Standard test that we want to use is BS EN 60243 or IEC 60243

Description:
Physical Laboratory needed for physical Testing ultrasonic gel for Acoustic Speed, Acoustic Impedance, Electroconductivity, Acoustic Attenuation Coefficient. There are 3 to begin and more to follow.

Description:
Canada or US FDA Food Microbiology Laboratory needed for FDA BAM Testing for Shigella and Vibrio

Description:
India FDA Food Laboratory needed for Carotene testing of carrot juice

Description:
Ireland or UK UKAS Toxicology Laboratory needed for FULL TOXICOLOGY TESTING OF INSECTICIDE PAINT

Description:
Turquoise dealer needs American certification laboratory for mineral certificate testing including its density , refrangibility , solidity , transparency...."

Description:
Illinois FDA GMP Good Laboratory needed for FDA food testing for Toxins: lead testing of raw goat milk

Description:
FDA GMP cosmetics laboratory needed for FDA GMP cosmetic analyis

Description:
USA physical laboratory needed for flammability testing to UL 94 Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing. 5VA and V-0 at 2.5 mm, V-0 at 1/16"

Description:
FDA GMP, GLP analytical chemistry laboratory needed for Identity testing on softgel capsules containing Celastrus paniculata (Indian Bittersweet) seed oil.

Description:
Europe cosmetics laboratory needed for EU compliance testing for sale of natural skin care products. (3)

Description:
India Microbiology Laboratory needed for microbiology testing of Unknown infection in tissue culture dishes. Nature of infection to be identified.

Description:
Food laboratory needed for food ingredient analysis: bbq sauce tested and analyzed for ingredients and ingredient amounts

Description:
Analytical Chemistry Laboratory needed for thickness testing and composition testing to measure to courier bags to determine if they have a different composition

Description:
USA CLIA certified genetics laboratory needed for DNA isolation from saliva or buccal samples and genotyping panel of 17 SNPs and possible DNA banking.

Description:
India FDA Food Laboratory needed for US FDA Food Contact Surface Testing of Polystyrene disposable plastic plates need to be tested for each lot that is exported to USA

Description:
UK FDA Pharmaceutical laboratory needed for FDA USP Testing: USP 87 approval required for Silicon Carbide ceramic material. Test samples will be provided for testing purposes.

Description:
India Clinical Laboratory needed for clinical laboratory testing of Coenzyme Q10

Description:
Pharmaceutical Analytical Chemistry Laboratory needed for USP Testing: Tiamulin Hydrogen Fumarate according USP Monograph

Description:
Food Laboratory needed for GRAS testing to prove product efficacy. Please contact me when you are able for time is very important.

Description:
United Arab Emirates Packaging Laboratory needed for packaging testing: number of sample-2 need to test if there are chemicals in the raw material

Description:
USA optical laboratory needed for Spectral Characterization testing. a quick and dirty spectral response as a function of angle test on a detector. Is this a service you provide, and if so how much would this test cost? The wavelength range we're interested in is 400-700 or so, and resolution isn't too important- 5nm or even 10nm steps would be more than good enough. As far as angular respons ...

Description:
ISO Laboratory needed to perform testing according to ISO15001 on high pressure pure oxygen applications.

Description:
India electrical laboratory needed for IEC electrical testing: high current and high voltage

Description:
USA Southwest or Southeast Acoustics Laboratory needed for ANSI Testing to ANSI S3.1 (Ears covered) Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms

Description:
Europe ISO Toxicology Laboratory needed for Neutral red uptake (NRU) cytotoxicity testing. one sample

Description:
India Oil Laboratory needed for ASTM Testing of residual oil: Test - ASTM Method cetane number (CN) D 613 derived CN D 6890 distillation D 86 (initial, 10%,20%, 30%, 40%, 50%, 60%,70%,80%,90% , end) composition D 1319 kin. viscosity (40 °C) D 445 net heat of combustion D240 aromatics (by SFC) D 5186 Please let me know the testing charges.

Description:
USA Materials Laboratory needed for ISO material testing (glass ionomer liquid/powder system)to ISO 9917-1:2007 Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements

Description:
Europe or USA Preclinical Contract Research Organization CRO needed for immunohistochemistry studies of monoclonal antibodies on fresh frozen normal human tissue panels

Description:
Canada or US pharmaceutical analytical chemistry laboratory needed for ingredient testing. Test ingredients contained in the cream. This includes active and inactive ingredients as well as natural, botanical, and homeopathic ingredients.

Description:
Pharmaceutical Preclinical Contract Research Organization needed for preclinical study of compound tested in a mouse or rat bleomycin-induced lung fibrosis model, including prophylactic and therapeutic dosing schedules.

Description:
INDIA MATERIALS LABORATORY NEEDED FOR INDIA STANDARDS CODE TESTING: TESTING OF ALUMINIUM CABLES,COPPER CABLES , ITS INSULATION/COPPER CONTENTS (as per INDIAN STANDARD CODE)

Description:
California Medical Materials Laboratory needed for non-destructive Luer testing under ISO 594-1, Luer Fitting Medical Device Test, ISO 594-2 performed on 112 total sample connections (8 cavities with 14 samples per cavity), this must be done to ISO standards 594-1, 594-2. We are looking for a quote at or below $25,000.

Description:
Nutraceutical Laboratory needed for Certificate of Analysis nutritional label testing of new brand of dietary supplements for offer in a retail setting. Before making this decision, we would like to ascertain an independent CofA for this company's protein powder. What protocols do you offer to fill this need? What turn-around time can we expect? We are specifically seeking quantification of protei ...

Description:
Large Manufacturer needs materials laboratory for ASTM Testing to ASTM D3539 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer Five Samples

Description:
USA analytical Chemistry Laboratory needed for natural gas testing, ASTM Testing: analyze for Oxygen, Mercaptanes, BTEX, Ethane & CO2.

Description:
US and Europe EPA and CE certified microbiology laboratory needed for EPA disinfectant Testing of intermediate-level disinfectant wipe for a cleaning and disinfection validation study that is being conducted on one of our medical device. The device is for hospital use and is in the process of having a CE certification. I am looking for a wipe that has been tested against a wide range of mic ...

Description:
USA analytical chemistry laboratory needed for waste testing: BTU content of waste derived ash (solid)

Description:
Genetics Laboratory needed for genetics testing to amplify and sequence 1 year old human remains DNA with accuracy. Three samples with bacterial and fungal contamination"

Description:
Russia Pharmaceutical Contract laboratory needed for BP or USP Testing of Pancreatine Tablets as per USP or BP"

Description:
Preference for New Jersey Laboratory needed for Eddy current inspection of 5 mm diameter steel bars to check for surface defects

Description:
Asia Food Laboratory needed for chloramphenicol testing in a food product

Description:
North America AAALAC Accredited Preclinical Contract Research Organization CRO needed for preclinical in vivo studies in rodents testing the effect of an experimental compounds on bleeding times"

Description:
Asia Microbiology Laboratory needed for AATCC, JIS, ASTM, ISO Antimicrobial Efficacy testing on antimicrobial treated textiles AATCC Test Methods 100, 147 JIS L 1902 ASTM E 2149 Multiple submissions through out the year, estimated 8 to 10 samples per submission

Description:
Asia food nutritional laboratory needed for nutritional food testing of pineapple fiber: 1) Glycemic index 2) Gluten content 3) Resistant starch content 4) fiber (soluble and insoluble) content

Description:
Large Automotive Company needs India Physical laboratory for Environmental Conditions and Test Procedures for Airborne Equipment Testing, Icing testing as per standard RTCA/DO-160F ,Section 24.0, Category B. there are five test units.

Description:
Midwest USA A2LA GMW 3283 Abrasaion (Schopper) Test or DIN 53863 Part 2

Description:
Florida analytical chemistry laboratory needed for ASTM Testing: Vapor Pressure Testing on various Terpene compounds

Description:
USA Analytical chemistry sensory laboratory needd for reverse engineering of a human biologic scent and felt that we have to analyze the sample, reverse engineer it to come up with an equivalent scent with or without the enzymes, proteins, etc... that are likely present

Description:
USA, Central USA, East Coast USA, West Coast USA Mechanical Laboratory needed for STP55/005, AMS D17.2 Testing. 10 coupons (5 ea of .080 mat'l and 5 ea of .016 2024-t3)need mechanical tests and metallographic inspection

Description:
New York or New Jersey Physical Laboratory needed for optical testing:Optical rotation ,refraction indice ,and percentage of sequiterpenes ,main components of amyris balsamifera from Haiti

Description:
Europe, US, Canada biomechaical Laboratory needed for ISO testing: mechanical testing in mammary implants filled with silicone gel According to ISO 14607:2007, DIN ISO 34-1/2004 and ISO 37:2011 for three differents samples.

Description:
India Laboratory needed for REACH Testing of Beach racket as per REACH directive

Description:
USA transportation certified laboratory needed for commodity testing: Charcoal as non-haz commodity for shipping in containers to overease , need certified laboratory

Description:
USA or Europe FDA or GMP Pharmaceutical Laboratory needed for FDA GMP testing on alginate micro-capsules: wall thickness, porosity/permeability, stability, breakage, and potential to aggregate

Description:
USA Materials Laboratory needed for ASTM Testing of API base oil analysis ASTM D-287, ASTM D-445, ASTM D-2161, ASTM D-2270, ASTM D-5293, ASTM D-97, ASTM D-92, ASTM D-4294, ASTM D5800, ASTM D-974, ASTM D-7419

Description:
West Coast forensics laboratory needed for container testing of one vial of morphene with a broken safety seal and one vial of versed with a broken safety seal. Ambulance company that wants to test the content concentration to rule out theft.

Description:
USA Mechanical Laboratory needed for ANSI Testing Full testing to ANSI B71.4, Commercial Turf Care Equipment - Safety Specifications 4 machines Full testing to ANSI B71.1 1 machine

Description:
USA EPA Environmental Laboratory needed for EPA filter air testing: air filter tested for the removal of VOC's, Dust, Fumes, Vapors, Gases

Description:
USA Canadian Government approved Environmental Laboratory needed for bis phenol testing for bis phenol A to Canadian Authorities. So the lab must be accredited by the Canadian Govt.

Description:
Canada or USA Mechanical Laboratory needed for Mechanical shear strength testing of shear pins on 10 samples to determine manufacturing & material variability

Description:
Canada Consumer Products Laboratory needed for Consumer Products CPSC testing on a cloth diaper according to CPSC guidelines

Description:
UAE plastics laboratory needed for rubber testing: quality checking of rubber used in conveyor belts for maximum long life . for stone crushing company in uae . We would like to know if you provide services for testing of the quality of material used in conveyors depending on which we will decide whther to purchase the conveyors belts of a particular brand or a dealer . This is important to us as ...

Description:
Africa clinical laboratory needed for human serum testing: 1-Huma Serum angiotesin (80 samples) 2-Human Serum leptin (80 samples) 3-Angiotensin CE Insertion deletion polymorphism (80 samples)

Description:
USA EPA Toxicology Laboratory needed for EPA Toxicology Testing on New chemicals

Description:
USA Food Laboratory needed for antioxidant testing of fresh mango, blueberries, blackberries for antioxidant content.

Description:
Asia and India plastics laboratory needed for Delta Y of Purified Terephtaliec Acid 2-3 samples of PTA, Required test named as delta Y .

Description:
USA Food Analytical Chemistry Laboratory needed for sulfite testing: ion chromography free - sulfite in Caramel Color

Description:
Eastern USA FDA Food Laboratory needed for FDA food testing of biscuits

Description:
Europe FDA GMP Food Laboratory needed for alcoholic beverage testing to determine if balanced and combined qand tested so they are approved and ready to be packaged.

Description:
USA ISO compliant; preferably ISO-17025 Environmental Laboratory needed for Content analysis of the following 17 rare earth metals content (mg/Kg) on sand matrix 2 samples.: 1. (Sc) Scandium 10. (Gd) Gadolinium 2. (Y) Yttrium 11. (Tb) Terbium 3. (La) Lanthanum 12. (Dy) Dysprosium 4. (Ce) Cerium 13. (Ho) Holmium 5. (Pr) Praseodymium 14. (Er) Erbium 6. (Nd) Neodymium 15. (Tm) Thulium 7. (Pm ...

Description:
Start-up tea manufacturer needs food laboratory for nutritional label testing, probiotics testing, organic acids testing, % alcohol testing. This is a fermented product that I would want tested for all information required on a nutrition label as well as different probiotics, antioxidants, B vitamins and organic acids. I would also need to have the % alcohol determined.

Description:
Eastern USA Food Microbiology Laboratory needed for microbiology bacteria testing to identify type of bacteria present in cultured vegetables along with the count, so that I can add info to my labeling/packaging

Description:
Caribbean or USA food Laboratory needed for food safety testing and food stability testing to test the safety, the quality and the shelves durability of a coconut milk product after adding the possible preservation to it. Plus seeking recommendation of best and cost effective approach to preserve our product for a longer lifetime on the shelves.

Description:
FDA GLP Preclinical Laboratory needed for GLP preclinical study. Preclinical analysis of TSH, T3 and T4 in rabbits. 30 samples.

Description:
USA metallurgical laboratory needed for cooper testing. powder form of copper for purity and quantity that can be obtain from this material and also a rock form of copper to have same testing done

Description:
China CNAS accreditated test laboratory needed for IEC Testing. Mechanical failing Load Testing on 36KV Pin Porcelain Insulator for 10KN

Description:
Electrical Laboratory needed for IEC electrical testing as per IEC 60076: C2 E2 F1 TESTING OF DRY TYPE CAST RESIN TRANSFORMER AS PER IEC 60076

Description:
South Africa Pharmaceutical Laboratory needed for gravimetric, analytical testingfor SANAS accreditation. 6 Inhalable Aerosol samplers that will be rotated 3 times with the impinger in the middle. This gives us a total of 126 samples. We are looking at getting as much information as possible out of our samples and would like know how much the analyses would cost as well as when, in the new yea ...

Description:
FDA certified laboratory needed for feed testing: Beef cattle feed additive melengestrol Acetate in cattle diets----10 samples

Description:
Europe FDA GMP Bioanalytical Laboratory needed for GMP Testing: BIACORE Antibody binding assay under GMP"

Description:
Physical Laboratory needed for DIN Testing Fogging Testing to DIN 75 201 Fogging Test

Description:
A2LA or ISO Food Laboratory needed for Analytical Chemistry Testing for Morpholine on Pome fruit

Description:
India Pharmaceutical Laboratory needed for pharmaceutical testing for apoptosis pathway analysis 02

Description:
USA FDA GLP Analytical Chemistry Labroatory needed for pharmaceutical testing: MS/ GC on pharmaceutical (xyz) presence of EO/ECH residuals after sterilization

Description:
USA FDA certified laboratory needed for analytical chemistry testing: residual ammonium chloride testing by Kjeltec analyser

Description:
U.S. ISO Lab needed for ISO Testing perform ISO 22612 Dry Micobial Penetration test -Dry on surgical gowns.

Description:
Southeastern USA bioanalytical laboratory needed for biohazard certification testing of flexible packaging containment system that needs to be certified to a level 4 Biohazard containment

Description:
Large manufacturer needs California Physical Laboratory for ASTM Testing ASTM D 1044/1003. Abrasion Testing to Our company will be starting a new project and we are looking for a lab to send continuous samples to for weatherability testing and abrasion testing as well. Please respond and will have more info.

Description:
Northern California Electrical Laboratory needed for electrical certification for electric bicycles to 16 CFR Part 1512

Description:
Eastern USA Software Laboratory needed for software testing for software development for session border controllers and mcrosoft lync. we need transaction data from these devices

Description:
South America FDA GMP Ananalytical Chemistry Laboratory needed for ICP-MS testing of several pharma fomulation performed. Prefer brazil but anywhere in south america is acceptable.

Description:
Pharmaceutical Microbiology Laboratory needed for Herpes & influenza virus neutralization in vitro 8 plant extracts (non cytotoxic) which we would like to test at 3 concentrations, incubated for 1h with a fixed cytotoxic concentration of herpes (1 or 2)virus and influenza virus to check whether the products neutralize virus in vitro and reduce cytotoxicity. Please inform approximate cost & time.

Description:
USA Preclinical Laboratory needed for Non-GLP Preclinical Pharmacokinetic / Pharmacodynamic Study: Preclinical PK/PD NHP (cyno), 7 week study n=30, subcutaneous dosing, weekly serial bone marrow collection, whole blood and serum collection, and ability to perform FACS and Elispot, or alternatively provide lab space for us to do these assays."

Description:
India Oil Laboratory needed for ASTM Testing of sodium petroleum sulphonate to ASTM standards"

Description:
India Physical Laboratory needed for UL Testing: As per UL 62275 9.4 Vibration test for cable ties. 6.2.2 Tensile test from same stds.

Description:
Large electronics firm needs electrical laboratory for electrical product safety testing 1.Need you support to Know Which are the Labs do have facility for LCD /LED product safety testing as per IS616: 2010. 2. Time period for testing & issuing certificate 3. Testing charges??.

Description:
Electrical Laboratory needed for lightning conductor testing in building.

Description:
Materials Laboratory needed for coating testing for coating thickness (DFT) on stainless product and what is the cost and lead time.

Description:
India microbiology laboratory needed for now hether anaerobic culture sampling is done or not

Description:
Analytical Chemistry Laboratory needed for hypoglycinn testing for Hypoglycin A in product. We want to export 1 skid of 60 cases, the port we want to export is to Miami. So please advice the best lab we can use for this product testing

Description:
Analytical chemistry and physical laboratory needed for freeze testing from -20c to -80c of deicer formulations as well as corrosion testing of 7 different products.

Description:
FDA GLP, GMP Bioanalytical Laboratory needed for GMP, GLP small molecule analytical testing : TLC scanning via densitometer on cytotoxic material

Description:
I am enquiring about your capability/ capacity to carry out measurements of retained austenite on some bearing rollers. The material is 100Cr6 or SAE 52100 With the heat treatments they have received, I would expect the retained austenite figure to be low - less than 5%. I understand an x-ray diffraction test is required to reliably measure such a level of austenite but, of course, I wil ...

Description:
USA nutraceutical analytical chemistry laboratory needed for dietary supplement testing for melamine, alcohol, hormones and illegal substances in sports nutrition products like whey proteins. How long does this take and how much is required for one sample product? Your prompt reply is highly appreciated. Omar El Bishlawy from Egypt Email: omar@bgroupme.com

Description:
USA FDA Food Laboratory needed for FDA shelf life testing of baked pies to determine shelf life

Description:
India clinical microbiology laboratory needed to assist India hospital with clinical microbiology virus testing. Recent possible endemic due to an unknown virus and hence would like analyze few samples

Description:
India electrical laboratory needed for electrical product safety testing 1. LCD /LED product safety testing as per IS616: 2010. 2. Time period for testing & issuing certificate 3. Testing charges...

Description:
blood pressure transducer retested to ANSI/AMMI BP-22 standard, AAMI Association for the. Advancement of Medical. Instrumentation. Blood pressure transducers. We need full documentation on the test method and results. We will need to test about 100 sensors from three representative lots. This includes all of the standards prescribed tests.

Description:
Atlanta analytical chemistry laboratory needed for tacroimus concentration testing. Test the concentration of tacrolimus in two samples of a simple syrup liquid compound of Prograf.

Description:
Midwest USA Analytical Chemistry Laboratory needed for API Testing, ASTM Testing Hydrocarbon analysis: hydrocarbon, fats, oil and grease, biosolids MIU, FFA, TFA, Fatty acid profile, sludge analysis, minerals, heavy metals

Description:
Food Laboratory needed for stability testinng of cookies. Test cookies for a use by date, shelf life

Description:
Canada Cosmetics Laboratory needed for cosmetic testing: Stability Testing, Viscosity Testing & Rheology testing on Personal Care Ointments and Creams

Description:
INDIA MICROBIOLOGY LABORATORY NEEDED FOR MICROBIOLOGY TESTING: SIX BACTERIAL STRAINS AND TWO FUNGAL STRAINS FOR PGPR,BIOCONTROL AND BIOFERTILIZATION PROPERTIES FOR EVALUATION.

Description:
Immunohistology Laboratory needed for biopsy testing: Immunohistochemistry (IHC) for detection of receptor protein TLR7 expression in biopsies from bladder of bladder cancer patients (phase I/II ongoing clinical trial)

Description:
Oil Laboratory needed for diesel testing to check the purity of diesel.

Description:
Analytical chemistry laboratory needed fortopical product testing: flash point testing. Could you provide a quote? How much product do you need for the analysis and how soon would results be available?

Description:
India Agriculture Laboratory needed for agricultural isolates relates to my academic interest which are very useful in Agricultural practices. I need your help to identify those along with their molecular characterization, enzyme assay and to know the active molecule for plant disease resistant. Please inform me the procedure to go ahead.

Description:
FDA GMP Food Laboratory needed for FDA food toxin testing Tetrodotoxin (puffer fish toxin). One of my customer is trying to import non-toxin puffer fish meat and I need to submit a test analysis report to FDA and show proof that puffer fish meat is safe to eat.

Description:
South America Analytical Chemistry Laboratory needed ffor ASTM Testing of white mineral oils. consistency in technical analysis by ASTM D 6591 and ASTM D 4294, respectively aromatics and sulfur content in mineral oils. we ask is a quote from a module type leasing analytical (analytical trailer) conditioned and equipped

Description:
India Polymer Laboratory needed for chromatography testing : Liquid polymer composition alalysis Gel permeation chromatography

Description:
Europe Materials Laboratory needed for plastics testing: Determination of the coefficient of thermal expansion (TMA - ISO 11359; or dilatometry) -40ºC to +80ºC

Description:
Florida ISO GMP / GLP pharmaceutical aboratory needed for Real Time stability testing and accelerated stability testing for topical product (class 2 medical device)"

Description:
MATERIALS LABORATORY NEEDED FOR RUBBER TESTING TO MEET UL & FM REQUIREMENTS. RUBBER SPECIMENS TO BE TESTED

Description:
Southeast US ISO GLP and GMP Microbiology Laboratory neededfor Microbiology Testing: Test biological indicators after dry heat sterilization Test medical device for bacterial endotoxins using the LAL assay

Description:
Canada Environmental Microbiology Laboratory needed for environmental microbiology testing: 1 sample for each of the 3 products. Each product is different consortium of microbes. We need to test the following for each product: 1. validation of effects on health and environment 2. Hydrocarbon degradation, chlorinated solvent degradation and plant enhancement 3. brewing the freeze-dried product ...

Description:
Southern USA physical laboratory needed for aerospace testing to IAW SP 04-003. Government Source Pressure Test

Description:
Physical Laboratory needed for ASTM testing foam insulation for tensile strength to ASTM D1623, Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics at cryogenic temperatures (-265 F / -165 C). Can you do such testing? If so, can you provide me a rough budgetary cost to perform this testing in 3 directions on one type of foam insulation? The foam is polyis ...

Description:
FDA, GMP compliant laboratory needed for ISO Testing of N-nitrosodiethanolamine (NDELA) testing

Description:
Eastern USA metallurgical laboratory needed for certification analysis of Coltan, Recovered from my mine site in West Africa.

Description:
Europe Materials Laboratory needed for ASTM 4488 testing,Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls

Description:
UK Microbiology Laboratory needed for microbiology testing: Measure if an advanced wound care product, provides an effective barrier to viruses.

Description:
India Analytical Chemistry Laboratory needed for iodine testing. Test to identify iodine content in tablets in ppm levels

Description:
FDA GMP Pennsylvania Physical Laboratory needed for FDA Testing: drop ball test for the optical lenses

Description:
California Materials Laboratory needed for gel permeation chromatography testing on samples of polyethylene glycol diacrylate (approx. 35000 mW) in water that I need tested for mW and poly dispersity.

Description:
North America testing for pyrophosphate in Sodium Phosphate Dibasic by FCC 8th edition? If so, what would be the cost and turnaround time? Assuming 1 sample, then assuming 5 samples.

Description:
Agriculture toxicology laboratory needed for toxicology testing on active ingredients: Female hormone + Permethrim Female hormone + Spinosad If you could please keep the two separate I would appreciate it.

Description:
Canada materials laboratory needed for mechanical testing, physical testing, consumer product testing for Automotive Parts Importer/Wholesaler and would like various prototype parts tested against competitor parts

Description:
Pacific Northwest Mechanical Laboratory needed for OSHA Testing, L&I Testing, WISHA Testing, ANSI Testing: Fall Prevention Drop Tests G-Corp. would like to fully test our new line of Grappling Clamps Friction Based" Fall Prevention / Fall Arrest Systems in order to satisfy any and all ANSI regulations. We are able to provide units for testing as well as some preliminary data we have collected we h ...

Description:
USA Preclinical Laboratory needed for preclinical in-vitro testing: culture bovine epithelial cells, incubate with test samples and contols, draw off supernatant and extract RNA for downstream testing by others. Must have direct experience with culturing and working with bovine epithelial cells. RFP available.

Description:
India Food Laboratory needed for vitamin Testing for vitamin C content to japanese regulations

Description:
Middle East pathology laboratory for proficiency testing of plant pathology (PT, such as plant viruses, bacteria phytoplasma etc."

Description:
Bioanalytical Laboratory needed for bioanalytical testing of Homocysteine, B12, B6, and Folic acid levels measured in the rat. Would you be able to provide those services? I would have a total of 160 samples for each analyte. If it were possible to have this done could you please provide with the following: 1)Cost 2)Plasma or Sera?(would prefer sera) 3)Volume of sample required 4)Method ...

Description:
FDA Food Laboratory needed for nutritional testing of kombucha. General nutritional testing done, as well as panels considering levels of alcohol, yeasts and bacterium.

Description:
USA Consumer Products and Toxicology Laboratory needed for toxicity testing of electronic appliance appears to be producing toxic odorless fumes. These need to be identified and measured. The appliance can be mailed to the lab.

Description:
India materials laboratory needed for mineralogy testing to determine type of mineral content is in it.

Description:
Cosmetic Analytical Chemistry Laboratory needed for formaldehyde testing: new keratin hair treatment for formaldehyde/aldehyde contents. They are released when heat is applied.

Description:
Canada Food Packaging Laboratory needed for food packaging testing: packaging compression tests for milkjugs on a 40x48 pallet Compression tests on milk jugs

Description:
USA FDA Food Laboratory needed for Food Testing needed for nutritional table and to test product for ingredient make-up to pass US FDA standards test.

Description:
Food Laboratory needed for Nutritional Testing on coconut oil testing: 1. Test on assessing Quality of the New innovation about the Smallholder Virgin Coconut Oil project using various appropriate rural technology methods; 1. Direct Micro Expelling (DME) 2. Fermentation 3. Sun dry Number of samples 1 each x 2 replicates =18 sampling 2. Test required to verify quality degradation of VCO ...

Description:
Canada Mechanical Laboratory needed for ISO Testing to ISO 16232, Cleanliness of Components of Fluid Circuits in Road Vehicles, 50 parts of 3.7 g each

Description:
USA Industrial Hygiene Laboratory needed for acoustics testing: Occupational noise measurements due new machines(manufacturer facilities)

Description:
Food Laboratory needed for amino acid testing on amino acid content To determine the gamma-aminobutyric acid (GABA) content in teas.

Description:
UK FDA GMP / GLP Pharmaceutical Laboratory needed for Raw Material Testing: Galantamine HBr Heavy metals G testing required to current EP monograph EP7.5, which requires a laboratory microwave oven. One sample to be tested

Description:
Canada , US Analytical Chemistry Laboratory needed for Transformation/Dissolution Testing. ooking for laboratory setup to perform the GHS (Globally Harmonized System) Testing for Toxicity Classification by the Transformation/Dissolution test Procedure. Although I refer to the GHS Test Procedure, we require this immediately for the upcoming IMDG Regulations regarding the washing of the ships cargo ...

Description:
Geochemical Laboratory needed for geochemical analysis of geochemical exploration samples XRF,AAS, for pre-prepared streamsediment, soil and rock samples

Description:
USA cosmetics analytical chemistry laboratory needed for deformulation testing of cosmetic product for series of spa treatments to find out what exactly is in the product

Description:
Materials Laboratory needed for acoustics testing for covers and accessories for iPad, Kindle, Nook, and many other tablets and e-readers: perform a series of tests with this product to try and quantify how much sound quality and volume is improved when using our case (as opposed to other cases or no case at all). Of course, we would provide you with all of the necessary components to be used for ...

Description:
South Africa environmental laboratory needed for soil analysis

Description:
South Korea Materials Laboratory needed for ASTM Testing and ISO Testing, Corrosion analysis testing is needed to verify resistance of external facing ATM (automated teller machine) components

Description:
India microbiology laboratory needed for antiviral testing. 05 compounds from plants i would like to do those compound antiviral active or not

Description:
Canada medicinal chemistry laboratory needed for medicinal marijuana Testing of active ingrediants in Medicinal marihuana. Specificly CBC CBN and THC counts.

Description:
USA Analytical Chemistry Laboratory needed to identify ions comprising an unknown ionic liquid and/or solutions containing ionic liquids. Would prefer LC/MS, IC/MS, and/or NMR techniques

Description:
Analytical Chemistry Laboratory needed for Phytosterol testing including betasitosterol, stigmasterol, campesterol & brassicasterol

Description:
India Food Laboratory nneed for food testing as well as water testing

Description:
Polymer Laboratory needed for polymer testing of polymer membranes for fuel cell research, and are looking for an analytical lab to measure proton conductivity of membranes. The polymers are organic/inorganic materials.

Description:
China geology laboratory needed for Laboratory test of physical, chemical content of ore sample, especially mineralization chemical structure Technological tests of benificiation methods

Description:
Asia or USA Geology Laboratory needed for pumice stone Analysis to Determine composition of pumice, and to determine whether it was manufactured or natural

Description:
LARGE MANUFACTURER NEEDS PHYSICAL LABORATORY FOR ASHRAE TSTING METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE: TEST METHOD OF FILTERS .i HAVE THREE NUMBERS OF SAMPLES ,ROOF FILTER,FLOOR FILTER AND PRE FILTER .

Description:
Mechanical Laboatory needed for John Deer Specification Testing to JDS-G169 Gravimetric Cleanliness Classes. Cleanliness Testing from John Deere Standard. "

Description:
Product Safety Laboratory needed for Biocompatibility testing of syringes with three different type of drugs"

Description:
ISO Food Laboratory needed for saffron testing: saffron quality and grading.

Description:
Hong Kong Food Laboratory needed for food testing for saturated fatty acids and unsaturated fatty acids. Samples to be sent via DHL by us.

Description:
France Analytical Chemistry Laboratory needed for gum testing to ISO-C80, non voliale gum residue and stoved gum residue. In case of positive answer, I need a quotation.

Description:
Oil Laboratory needed for oil testing oil waste and recycling it. We wont to do some test, which say to us wha our mixture consider includes Cas numbers. Is it possible?

Description:
Pakistan FDA, ISO, GMP, GLP EPA Forensics Laboratory needed for DIN and USP Testing: Trace Chemistry. Forensic Photography Documentation Latent Finger Print

Description:
India Surface cleaning liquid manufacturer which acts as disinfectant, deodorizer, insect repellent needs consumer producs laboratory for cleaning properties testing, disinfectant testing, toxicological studies, safety testing, allergic studies - (eyes, skin, oral), food grade, environmental testing, deodorizer testing, insect repellent and consumer products safety in the Indian and International ...

Description:
FDA GMP Bioanalytical laboratory needed for bioanalytical testing: human protease selectivity testing. Need to test the compounds inhibition of protease

Description:
New Zealand Preclinical Laboratory needed for HIV Testing of aluminum would provide an impermeable barrier to HIV

Description:
USA virology laboratory needed

Description:
India analytical chemistry laboratory needed for chemical analysis of unknown chemical sample

Description:
Colorado Metallurgical Laboratory needed for soil testing for precious metals. 70 different samples of dirt concentrate for gold, silver, palladium, and rhodium.

Description:
Oil Laboratories needed for CPM or DSCP to supply us Crude Oil Samples that have Wax Appearance Temperature (WAT) data either by CPM or DSC. The samples will be used for verification purposes for a new automatic analyzer that can test WAT of crude oils in a matter of minutes (vs. hours when done by CPM).

Description:
USA Nanaotechnology Laboratory needed for nanoparticle testing. First project is for nanoparticles' surface functionalization. We need to find a solution to disperse metallic inorganic nanoparticles (chalcogenide nanoparticles: 50-180nm) in the industrial oils (synthetic and mineral) and prevent nanoparticles settling. The other project is in the field of a petroleum engineering, particularl ...

Description:
India and Asia Analytical Chemistry Laboratory needed for Gas Chromatography Testing

Description:
India biomechanical laboratory needed for ASTM Testing and ISO mechnical testing

Description:
ELECTRICAL LABORATORY NEEDED FOR ASTM TESTING, DIELECTRIC CONSTANT AND DISSIPATION FACTOR FROM 2 UP TO 14 GIGA HERTZ TO ASTM D 150, Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation ASTM D 5568 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials

Description:
Pharmaceutical Toxicology Laboratory needed for Osmalarity testing with abnormal toxicity testing of Metronidazole IV 100ml BP

Description:
Clinical testing laboratory needed to prepare clinical laboratory interference packages for regulatory filings. We have a product that can introduce interference with routine clinical lab tests and instruments and we are in search of a company that can perform all of the required testing (eg., linearity, specificity, sensitivity, etc.) on a broad range of clinical instruments and that summarize th ...

Description:
Australia Contract Research Organization CRO needed for ADMET Studies

Description:
India consumer Product safety laboratory needed for baby diaper testing

Description:
Oil Laboratory needed for turbine oil testing water content - viscosity - colour - ph-values - content of metal

Description:
Europe veterinary medicine laboratory needed for sheep serum testing. V?NCA alkaloides estimation alkaloid on the serum of sheep.

Description:
Safety Laboratory needed for BS EN Testing to BS EN388 Protection against Mechanical Hazards and BS EN422, Rubber and plastics. Machines. Safety

Description:
California FDA GLP Bioanalytical Laboratory needed for FDA Tissue Testing with Hemo FAXS Tissue FAXS systems

Description:
Plastics Laboratory needed for polyester testing. Determination of nitrogen and /or sulfur content in the range of 0.1ppm up to approx. 10ppm Sample is a thermoplastic polyester (solid at RT)

Description:
Canada analytical chemistry laboratory needed for resin testing for Quantity of Podophyllum resin (podophyllin) and/or podophyllotoxin in an encapsulated, powdered multi-ingredient natural health product.

Description:
Medicinal Chemistry Laboratory needed for contaminant testing. Herb testing of an herbal tincture of Cryptolepis sanguinolenta to confirm identity of the herb and presence/levels of any contaminents such as mold or fungus that would make the tincture unsafe for human consumption.

Description:
West Coast USA medicinal chemistry laboratory needed for chinese herb testing: basic ingredients. 6 samples: 3 creams, and 3 powders.

Description:
Plastics Laboratory needed for polymer testing to determine the molecular weight and polydispersity index of an insoluble polymer (insoluble in commonly used organic and aqueous solutions)

Description:
Australia or Asia Toxicology Laboratory needed for OECD Toxicology Testing to OECD GUIDELINE FOR THE TESTING OF CHEMICALS: LD50-Acute Inhalation Toxicity Product in the form of aerosol to be tested for inhalation effects on rats so that it is safe for use in human environment.

Description:
Asia geophysical laboratory needed for Uniaxial compression testing of rock core samples. Direct shear testing of core samples

Description:
USA Analytical Chemistry Laboratory needed for ASTM Testing of cleaning efficacy of detergents to clean surgical instruments according to ASTM E2314 standard Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method

Description:
FDA GLP Preclinical Laboratory needed for ISO 10993 biocompatability Testing of Permanent injectable device; need cytotoxicity, sensitization, Irritation, systemic toxicity, subacute toxicity,implantation, hemocompatability, Chronic Toxicity. Do not need Carcinogenicity.

Description:
Oil Laboratory needed for ASTM Testing to ASTM D7112, Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer 10 samples

Description:
Central California Environmental Microbiology Laboratory needed for water testing of human Bacteroides by PCR on surface water samples

Description:
USA Analytical Laboratory needed for Developing various formulations of colloidal micelle surfactants and need testing to determine Critical Micelle Concentration of the resulting Aqueous Surfactants for highest levels

Description:
Eastern USA sensory laboratory needed for sensory taste testing with electronic tongue tester for oral solid dosage form taste Test samples provided

Description:
UK or Europe Laboratory needed for EN Testing to EN356 of glass range

Description:
EU Environmental Laboratory needed for metallurgical testing of Heavy metals according to the standard EN 1302, Chemicals used for treatment of water intended for human consumption- Aluminium based coagulants-Analytical methods

Description:
IATA transportation laboratory needed for IATA Testing of dangerous goods shipping contianer polyurethane shipper tested so it can have printed on the carton UN3373 4G/Class 6 UN1845 Misc 9

Description:
Africa Analytical Chemistry Mobile Laboratory needed for Testing Petroleum Fuels

Description:
Bioanalytical Laboratory needed for bioanalytical testing: run RIA samples with an outside vendor kit. Specifically analyzing human serum for intact PTH with a RIA kit from Scantibodies.

Description:
USA or Canada food laboratory needed for Organic acid testing in food (high fructose corn syrup) - lactic acid, acetic acid, formic acid, glycolic acid, malic acid, citric acid, pyruvic acid, levulinate

Description:
Eastern USA Microbiology Laboratory needed for microbiology testing for Tick-borne pathogens: Lyme disease(borrelia burgdorferi)Babesiosis (babesia microti) Bartonellosis(bartonella henselae)

Description:
USA MaterialsLaboratory needed for polycarbonate testing: internal imaging of bulk polycarbonate samples for internal stress or cracking

Description:
Europe analytical chemistry laboratory needed for ISO Testing and ASTM Testing of cosmetics: Clorometil isotiazolinona (CIT) Methylisothiazolinone (MIT) Amyl Cinnamal (CAS nº 122-40-7) Cinnamyl alcohol (CAS nº 104-54-1) Citral (CAS nº 5393-40-5) Eugenol (CAS nº 97-53-0) Hydroxycitronellal (CAS nº 107-75-5) Isoeugenol (CAS nº 97-54-1) Benzyl salicilate (CAS nº 118-58-1) Cinnamal (CAS nº 10 ...

Description:
Environmental laboratory needed for Soil testing for nutrition

Description:
Africa Food Laboratory needed for nutritional testing of mushrooms. Simultaneous reverse-phase-HPLC analysis of water soluble and fat soluble vitamins in 5 samples. -crude protein analysis in five samples. -analysis of 6 minerals in 5 samples

Description:
Plastics Laboratory needed for ASTM Testing, ISO Testing and DIN Testing of 25 kg capacity Plastic bag which used for packing polypropylene or polyetheylene pellets inside the bag to be tested for its fitness

Description:
Nevada food laboratory needed for olive testing testing olives for fat,oil, water content. This is necessary to determine optomine time for harvest,etc.

Description:
Eastern USA Food Laboratory needed for food testing for peroxide in food

Description:
Rubber manufacturer exporting rubber products to Europe needs rubber testing of rubber mat for electrical resistance testing to: EN 13501-1/DIN 4102 B1, BS 921 and ISO 1853. Please inform us the possibility of doing this test in your laboratory and offer us your most favorable quotation for the test.

Description:
Mechanical Laboratory needed for mechanical testing: test one sample ACSR Zebra conductor as per BS EN 50182 for Type Test ,the detail as per below; 1) Breaking Strength Test 2) Stress-Strain Test

Description:
Food Packaging Laboratory needed for EN1186-part 13 food packaging testing on plastic bag in contact with dried/roasted nuts. Could you please give me a price per sample quote for the EN1186-part 13 protocol, with Tenax as the food simulant? What is your standard turn around time, and what are the surcharges for faster turn around times? Please send the quote to my attention.

Description:
Mechanical Laboratory needed for load testing

Description:
USA Bioanalytical Laboratory needed for polymer testing: MALDI mass spec and proton NMR on low MW viscous polymer. (N=1 for each test)

Description:
USA food laboratory needed for beverage testing for alcohol content

Description:
FDA GMP Pharmaceutical Laboratory needed for USP testing per Octoxynol 9 Limit of Dioxane

Description:
USA FDA GMP Pharmaceutical Laboratory needed for GMP Testing for surface tension measurement of 50 aqueous solutions

Description:
Need the following preclinical toxicology services from one CRO and/or Preclinical Laboratory: 1) LDH Toxicology Assay in neurons 2) Silver stain histology toxicology assay 3)Pilocarpine induced status epilepticus (This is a model of prolonged seizures)

Description:
USA AOCS ISO Oil Laboratory needed for ASTM Testing Hydroperoxide testing in diesel and biodiesel fuels to ASTM D6447, ASTM D3703, or AOCS/ISO equivalent

Description:
Asia food laboratory needed for irradiation testing for detection of food irradiation by PHOTO STIMULATED LUMINESCENCE (PSL) in mixes and spices and requesting for a quotation for this testing.

Description:
Asia geology laboratory needed for geophysical testing of andesitic rock for mpa and abrasion index and unconfined compressive strengths

Description:
Medical Device Laboratory needed for stability testing of dental product which we would like to import from Switzerland. The problem is the stability studies. Our local authorities require both stability and accelarated testing in Zone IV conditions and the Manufacturer only has Zone II available. We are investigating the cost of getting these tests done for one product. They have asked for 1-6 re ...

Description:
USA EPA GLP Microbiology Laboratory needed for EPA Microbiology testing of cleaning agent EPA classified as a 'pesticide' for it's efficacy in killing: ECOLI, HIV, ROTA VIRUS, etc. Laboratory testing. We have a European testing model already established.

Description:
Mechanical Laboratory needed for plastics automotive testing to test painted plastic parts test for VW TL 211 Specification.

Description:
Plastics laboratory needed for epoxy testing: "LONG TERM FLEXURAL CREEP TEST" for epoxy resin CIPP liner use in pipe rehabilitation.

Description:
Agriculture Toxicology Laboratory needed for Insecticide Testing. Toxicity Testing mostly for registration purposes as well as compiling registration dossiers. One of our clients has a pheromone product containing a pheromone and an insecticide. They need laboratory tests done in order for the product to be registered here in South Africa. We need a GLP or ISO 17025 accredited laboratory that can ...

Description:
UK consumer products laboratory needed for hygienic testing of 10piece nappy. 01piece pillow. 01piece towel.

Description:
Geology Laboratory needed for IMSBC 2012 testing: Penetration Test and Proctor /Faberger Test for sample of Iron ore Fines Hematitic natural mineral

Description:
Bioanalytical laboratory needed for serum testing Drug-free human serum containing Amikacin, Digoxin, Gentamicin, or Vancomycin. GC/MS, LC/MS or HPLC assay. Single-analyte samples containing Amikacin (0 to 50 ug/mL), Digoxin (0-5 ng/mL), Gentamicin (0-10 ug/mL), or Vancomycin (0-100 ug/ml). 12 samples each analyte for the 4 analytes.

Description:
India or China FDA GLP Clinical Laboratory needed for FDA GLP Clinical testing on humans, including RIPT, moisturization, anti-perspirant to US standards. Also consider lab doing Mat Tek tests

Description:
Europe Bioanalytical Laboratory needed total nutritional testing of parenteral for rats

Description:
Analytical Chemistry Laboratory needed for Elemental analysis of C, H, O

Description:
Plastics laboratory needed to test water vapour transmission rate and oxygen transmission rate in some flexible films. I have 16 samples to test it.

Description:
message: Hi there, I require my recipes to have Food Laboratory needed for food nutritional label testing to conduct the lab analysis for each recipe.

Description:
Southern California oil laboratory needed for ASTM Testing to ASTM Test Method D 5453-93 to ensure diesel fuel meets the 15 ppm standard.

Description:
Asia Food Laboratory needed for food testing: 1. Determining and certifying the shelf-life of a food item (through lab testings) 2. Can you provide this service in Hong Kong and how much it will cost? 3. How to determine and certify the ingredients of a food item (through lab testing?) 4.Can you provide this service in Hong Kong and how much it will cost? 5. How to determine the nutritional conte ...

Description:
Bioanalytical laboratory needed for neuroprotective drug testing: screening of possible binding-receptors for a small molecule that we are developing as possible drug. I wonder to know if you have any service that could be of our interest or that you could advise us for studying this topic.

Description:
Physical Laboratory needed for solar panel testing for strength of the our racking system against wind and snow load. Tensile test for racking system (including end clips, mid clips , nuts and bolts) is a good idea to prove strength of the system against wind and snow load. If it is possible, can you give me an information about Load Bearing test: 1) Qualifications and Certificates 2) Quote 3) Lea ...

Description:
Massachusetts environmental microbiology laboratory needed for legionella testing: soil, water air conditioning, water heater, loooking for legionella

Description:
Plastics Materials Laboratory needed for polyethylene testing of 12" O.D. corrugated polyethylene wastewater drainfield pipe for 15 years and we would like it tested for H-20 wheel loads and for burial to 8 feet deep.

Description:
Pacific Northwest USA Materials Laboratory needed for ASTM Testing to ASTM C 423, Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method 8 x 8 sqft samples

Description:
USA FDA GMP Food Laboratory needed for food packaging testing of recycled PET material aimed for food container production. In order to confirm the food safety of our material we are willing to analyze its food contact safety by executing the migration test for all possible migrants that can be considered as toxic in correspondence with local food safety standards. Moreover, we are looking for th ...

Description:
FDA GMP Costa Rica Food laboratory needed for food testing

Description:
USA Industrial Hygiene Laboratory needed for ASHRAE Testing to ASHRAE Standard 52.2-2007 -- Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size (ANSI approved)

Description:
Europe mechanical, physical laboratory needed for Shock and vibration tests, environmental, climatic tests, salt spray tests, Xenotest, Kaesternich test."

Description:
Microbiology Laboratory needed for Flushability testing focusing on Edana Methods of Aerobic Biodegradation (WSP 513.2 or ISO 14852) or Anaerobic Biodegradation test (WSP 514.2 or ISO 11734)

Description:
TAMPA BIOANALYTICAL LABORATORY NEEDED FORCYTOCHROME P4550 ENZYME TESTING FOR DRUG METABOLISM.

Description:
Europe FDA GMP Analytical Chemistry Laboratory needed for FDA GMP Testing of specified microorganisms according to USP 35. Test suitability for our product included. 2 samples

Description:
Australia analytical chemistry laboratory needed for canola oil testing for determination of NSP and glucosinolate in canola meal

Description:
Turkey electrical laboratory needed for IEC Testing : type tests according to iec 60071-202 for prefabricated compact substation

Description:
USA FDA Food Laboratory needed for FDA nutritional testing of green coffee bean

Description:
India Agriculture Laboratory needed for analytical chemistry testing i) Aldehyde--- mg/kg ii) Biuret--- weight %& iii) Urea content--- weight %

Description:
United States Medical Device Product Safety Laboratory needed for ANSI AAMI Testing, performance testing / biocompatability Testing for 510 K FDA approval (Class 1) to ANSI AAMI PB70:2003 Association for the Advancement of Medical Instrumentation ANSI/AAMI PB70:2003/(R)2009 Liquid barrier performance and classification of protective apparel

Description:
USA Electrical and Mechanical Laboratory needed for ANSI Testing: Pefrom the Complete set of testing describe in ANSI 119.4 for Al-AL conductors with a wire range

Description:
India FDA GLP analytical chemistry laboratory needed for zinc pyrthione testing: Ionized pyrithione & Total disulphided present in zinc pyrithione. Method of analysis is by Polorography. We will provide the test method.

Description:
India FDA GLP Laboratory needed for GLP Photostabilty Testing of sunscreen active substance

Description:
Physical Laboratory needed for soil testing: API Method 1628 NAPL Saturation on soil samples

Description:
California Medicaal Laboratory needed for Karyotype testing for analysis r/t infertility / chronic miscarriage

Description:
US Chemical Research and Development R&D Laboratory needed to assist us in creating a cleaning chemical used for the decontamination of mold, pet urine odor and meth lab residue in homes."

Description:
USA FDA GMP Bioanalytical Laboratory needed for GMP Bioassays: GMP USP Testing to USP 121 Biopotency USP 121 Bioidentity

Description:
UK analytical chemistry laboratory needed for oxygen testing of Aviators Oxygen gas to MIL-PRF-27210H

Description:
Environmental Laboratory needed for EPA Office of Chemical Safety and Pollution Prevention OCSPP 830.6320 corrosion characteristics

Description:
California FDA GMP Food Laboratory needed for nutritional testing > nutritional facts analysis for one of our products. It is an agave sweetener. We want to know exactly what is in our product, in terms of carbohydrates, calories and such.

Description:
Electrical laboratory needed for conductivity testing of hose

Description:
Analytical Chemistry Labroatory needed for water vapour transmission rate/oxygen transmission rate testing

Description:
Food Laboratory needed for food testing of: 1.Biscuits (fruit buiscuits and chocolate biscuits) 2. Coffee 3.Hot Chocolate 4. Sweets (boiled, sugar coated, eggy and snowies) 5. Tea (loose tea) 6. Marshmallows 7.Chocolate 5.

Description:
Analytical Chemistry Laboratory needed for pharmaceutical impurity testing to EP monograph for Trolamine (Triethanolamine), Impurity C test Please note that this assay uses a unique detector (chemoluminescence: dual plasma burner in nitrosamine mode).

Description:
ISO andNABL accredited geology laboratory needed for Dimensional Stone testing

Description:
US Clinical Microbiology Laboratory needed for microbiology testing: Minimum Inhibitory Concentration Test

Description:
USA or Canada FDA GMP cosmetics laboratory needed for cosmetic finished produt testing for Nitrosamine as a buy product in finished products,ie: Facial Cream and Mud.

Description:
USA FDA Microbiology Laboratory (Texas preferred) needed for FDA Salmonella contamination testing required by the FDA. 5 samples.

Description:
USA Microbiology Laboratory needed for bacteria testing to determine the presence of MRSA (and other bacteria) on fabric samples form our workplace.

Description:
Physical Laboratory needed for Cable Testing to MIL STD 810D tests method 514.3, 513.3 and 516.3 I need to undertake those three test for RF cable and connectors regards

Description:
Australia TGA Laboratory needed for sterility and pyrogenicity testing on four separate stable isotope tracers (3 x injectable & 1 x ingestible). Originally purchased from Cambridge Isotopes and aliquoted into small batches.

Description:
FDA GLP bioanalytical laboratory needed for GLP Testing: Quantification of bulky adducts in human blood leukocytes using 32P-postlabelling

Description:
Africa Metallurgical Laboratory needed for iron ore testing: Chemical Analysis and Mineralogical Study of Iron Ore especially with respect to Phosphorus

Description:
India environmental laboratory needed for ASHRE Testing of Fume hood to ASHRAE 110, ASHRAE 110: Fume Hood & Laboratory Safety Testing

Description:
Calgary environmental laboratory needed for chemistry testing: chemical make up of sample provided we will provide any number of samples necessary.

Description:
South or Central America MERCOSUR, UE and FDA Packaging laboratory needed for food packaging testing: Total and Especific Migration in aqueous simulants in cups and boxes made fron cupstock and cardboard materials

Description:
UK Clinical Laboratory needed for urine testing: 2,4-toluenediamine presence in urine

Description:
America Microbiology Laboratory needed for antibaterial testing of "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices to ISO 22196 Antimicrobial Activity of Plastics "Measurement of Antibacterial Activity on Plastics Surfaces "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices. (we apply to window of smart phone, camera, tablet PC, E-book and so on.) T ...

Description:
Food Laboratory needed for polyphenol testing for polyphenol composition of pomegranate extract.

Description:
India analytical chemistry laboratory needed for hydrocarbon testing for butanol. No of samples - 1 Sample Description - Hydrocarbon solvent. Test Type - Kauri Butanol Value

Description:
Analytial hemistry laboratory needed for cosmetic testing. Need to know chemical breakdown showing what elements make up each moisterizer or serum product with the percentage of each contained.

Description:
India FDA GLP analytical chemistry laboratory needed for cyanide testing to analyze cyanide content at PPB levels

Description:
Metallurgical Laboratory needed for steel testing 1. Testing of steel (24 specimens) by Brinell method HB 1/30. Thickness of a steel specimen 0.06-0.1", hardness ~200 HB. 2. Testing of aluminum alloy (24 specimens) by Brinell method HB 1/5/30. Thickness of an aluminum specimen 0.012", hardness ~30-40 HB.

Description:
INDIA PHYSICAL LABORATORY NEEDED FOR ANSI AND UL TESTING TO ANSI/ UL 1709 RAPID RAISE FIRE TEST FIRE PROOF ENCLOSURE FOR HYDRAULIC,ELECTRIC,PNEUMATIC ACTUATOR, TEMP-1400 C DEGREE, 2"F0R 3O MINIUTS AND 4"FRO 1 HOURES.

Description:
USA TTB and FDA Laboratory needed fo Ethanol Testing of approximately 15 samples for the percentage of ethanol. The samples are cocktail bittters.

Description:
Consumer Products Safety Laboratory needed for Consumer Product Safety CPSC Testing of toy jewellery

Description:
Physical Chemistry Laboratory needed for particle analysis. particle samples from a Grit Blast system analyzed both for particle sizing and chemical composition. We have four samples that need analyzing. Need how much this would cost and the approximate turn-around time?

Description:
Cinnercuak Food Laboratory needed to measure lipoxygenase activity in black bean flour email: phonenumber: address: St. Boniface Research Centre 351 Tache Ave Winnipeg, MB. R2H 2A6

Description:
Metallurgical Laboratory needed for metal analysis: analyze the metal polishing dust the test I need is called CAM 17 METAL

Description:
FDA GMP Cosmetics Laboratory needed for FDA SPF Testing of cosmetic product tested for SPF with the FDA testing guidelines.

Description:
Vancouver Microbiology Laboratory needed for Microbiology testing lab antibiogram suceptibility testing in Vancouver Canada

Description:
Restaurant owner needs food analytical laboratory to deformulate a hot sauce recipe of a competitor and know how to make the recipe.

Description:
Mexico metallurgical laboratory needed for analysing rocks form a mine

Description:
Eastern USA Food Laboratory needed for Nutritional Testing for nutritional information label, and any testing to put a sauce to market.

Description:
Food Laboratory needed for Extraction and purification of anthocyanins from red cabbage in a purified form. Additional testing on this extract will be done if the results are favorable.

Description:
USA Food Laboratory needed for food testing: MSG (monosodium glutamate) and food colors in food

Description:
UAE or Kuwait consumer product sensory laboratory needed for sensory acceptance testing of 5 digestive biscuits ( 1 ourproduct + 4 competitor products) by consumers in UAE or Kuwait. 2. Methodology: Sensory Acceptance Test The 5 digestive biscuits should be evaluated by a representative sample in a quantitative consumer acceptance measurement according to Central Location Test (CLT) metho ...

Description:
FDA Toxicology Laboratory needed for cytotoxicity testing, FDA testing for condom compatibility with personal lubricants. Cytotoxicity "

Description:
Eastern USA Cosmetics Microbiology Laboratory needed for microbiology testing: standard microbiology yeast, mold, fungus for facial cosmetics including creams, serums and lotions.

Description:
Southeast USA Materials Laboratory needed for ASTM Testing Annual Radiopacity Test to ASTM 640-7

Description:
Construction Materials Laboratory needed ffor insultation testing:Sound absorption of various insulation materials. Materials such as fiberglass insulation.

Description:
USA non-FDA GLP Toxicology Laboratory needed fornon-FDA GLP Toxicology Studies: Acute Oral (LD50) in rats Acute Dermal (LC50) in rabbits

Description:
Texas analytical chemistry laboratory needed for hplc testing on wood chips

Description:
USA FDA cGMP Analytical Chemistry Laboratory needed for cGMP Testing using a qualified testing method,quantify atropa belladonna alkaloids (atropine and scopolamine) in a 3X homeopathic drug product

Description:
3rd party laboratory needed that does testing to show that a product that is made is not attracted to rodents particularly mice. Please let me know something on this soon today.

Description:
Africa Clinical laboratory needed for coagualation testing: zeta potential measurement using zeta - meter in coagualation test

Description:
Law firm needs forensic laboratory for DNA Testing. One sample. Test for DNA and HSV. Have dried sperm in cloth.

Description:
USA Oil Laboratory needed for crude oil testing of one crude oil sample for Wax Appearance Temperature (WAT), also known as cloud point. ASTM D2500 does not work for this crude because it is not transparent. The best test method is Differential Scanning Calorimetry, which we do not have.

Description:
USA Toxicology Laboratory needed for toxicity testing of Cyanogenic compound, to Food Chemistry Toxicology 26.149

Description:
Large Automotive manufacturer needs mechanical laboratory for evaluation of denting, oil canning approximately 100 locations on vehicle, 1 vehicle every 3 to 6 weeks

Description:
Asia Materials Laboratory needed for ASTM Testing Thermal Insulation Material to ASTM C303, ASTM C411, ASTM C356, ASTM C177, ASTM C167, ASTM C612, ASTM C1104

Description:
China Metallurgical Laboratory needed for alloy testing: need to know components of some bronze alloy

Description:
Singapore and Hong Kong Materials Laboratory needed for ASTM Testing to ASTM E96 Module B Water vapour transmission test on wallpaper samples in accordance to ASTM E96 Module B.

Description:
USA Food Laboratory needed for Food Contact Migration Testing to meet EU regs.

Description:
Africa Mining Laboratory needed

Description:
South Africa materials laboratory needed for ASTM Testing and ISO Testing of oil & gas (specifically diesel fuel)to Anti-Corrosion to ASTM 0665 Anti-Foam to ASTM 0892 Lubricity to ASTM 06079 Electrical Conductivity of distillate fuels to ASTM 02624 Filter blocking to ASTM 04539 Pour Point to ASTM 097 Injector spray pattern/pressure test to IS08984 parts 1 & 2: 1993

Description:
Pharmaceutical Laboratory needed for batch testing. Comparison of two batches of an organic molecule. One batch contains very low levels of one or several impurities that must be identified. A combination of highly sensitive, state-of-the-art analytical techniques will be needed to elucidate this low level impurity."

Description:
Physical Laboratory needed for Tire Sealant Testing on car tyre sealant used to stop punctures We need some testing required for road usage 1 Boiling point Question 2 Freezing point Question 3 Balancing and Vibration rate at 120 KM if any effect Question 4 Speed rate at 120 KM if any effect Question 5 Corioion Rate against Steel, Alloy, and Cast Alloy

Description:
Oil Laboratory needed for oil testing. Test a crude oil sample for vapor pressure and vapor molecular weight.

Description:
USA forensics laboratory needed for Furfurylamine testing - one sample of construction debris collected from a fire.

Description:
Canada Food Laboratory needed for wine testing.

Description:
Medical Device Laboratory needed to conduct tests that show x-ray detect ability in materials? I have some surgical tubing that must be x-ray detectable. Can you test its detect ability? Please provide a cost estimate for the test? What would be required? What type of turn around time for testing? Thank you

Description:
Agriculture Laboratory needed for grazon testing. Please provide a quote for analysis of Grazon per sample

Description:
Consumer Product Toy Laboratory needed for toy safety testing a child's toy

Description:
Food Laboratory needed for quantitative analysis for polysorbate 80 in a liquid food product.

Description:
Pet food laboratory needed for guaranteed pet food analysis for all natural horse treats.

Description:
Dubai or Africa Petroleum Laboratories needed for crude oil analysis tests for crude oil, gas and produced water.

Description:
Western Europe FDA GMP analytical chemistry labroatory needed for GMP impurity testing and dissolution testing of pharmaceutical CTM by HPLC with Corona CAD detection. GMP organization required. Western European location is a must. "

Description:
Environmental Toxicology Laboratory needed for OECD aquatic toxicity studies to OECD GUIDELINE FOR TESTING OF CHEMICALS OECD 201, Freshwater Alga and Cyanobacteria, Growth Inhibition Test, OECD 202 Daphnia sp. Acute Immobilisation Test, OECD 203,Test No. 203: Fish, Acute Toxicity Test OSPAR HOCNF for the North Sea, for Algae and Sediment Reworker for a Non-ionic Surfactant

Description:
USA Mechancial Laboratory needed for ASHRAE Testing to ASHRAE 63.1 Refrigerant Filter Capacity Testing for Moisture H20. Identification of Equilibrium Point Dryness

Description:
Toxicology Laboratory needed for forensic toxicity testing in Legal case where client wants to test beverage product for general potential toxins and toxicity.

Description:
USA Plastics Laboratory needed for plastics testing. Test Acetaldehyde in Bottle grade resin for PET manufacturer. We are looking for a third party to independently test our resin.

Description:
Materials Laboratory needed for ANSI Testing of masonry bits need testing of products to meet ANSI standards.

Description:
India Mechanical Laboratory needed for API Testing for Certifying valve per API RP591, User Acceptance of Refinery Valves

Description:
Eastern USA FDA certified / registered and audited GMP and GLP Pharmaceutical Laboratory needed for API Testing, Excipient Testing & Container Closure system testing as per Pharmacopeia methodsUSP general chapter and monograph testing for raw material releases more focused on excipients and CCS component testing. Elemental analysis including other metal analysis or micro testing ability is prefe ...

Description:
FDA Food Laboratory needed for FDA Food analysis for FDA Certification

Description:
USA FDA Laboratory needed for ASTM Testing to ASTM D-3467, Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

Description:
Analytical Chemistry Laboratory needed for fluid testing. Have 1 55 gallon drum of fluid on our ship that needs to be identified. Most likely Industrial marine grade acid cleaner or soap- possibly Alumabrite or Aquasalt 20 20

Description:
Pharmaceutical Packaging FDA Laboratory needed for Carbon tetra chloride Adsorption Capacity Testing: CCl4 Adsorption Capacity of activated Carbon in Packaging material.

Description:
Canada Food Laboratory needed for food toxicity testing and nutritional testing of juice to test for: Vitamins (A, C, folate, thiamine); Minerals (magnesium, potassium); Arsenic; Pigment (anthocyanin, betacyanin)

Description:
Eastern USA analytical chemistry laboratory needed for aspirin testing. Determination of the contents of MSM, DMSO, Aspirin per 0.5 oz droplet bottle of an aqueous solution.

Description:
Illinois chemistry laboratory needed for wound care composition testing and stability testing to see which chemicals compose its ingredient list. I especially want to know which preservative is being used to extend its shelf life.

Description:
Canada or USA FDA GMP Food Laboratory needed for Food Nutritional label Testing for Ca, Zn

Description:
India Bioanalytical Laboratory needed for clinical testing. Serum testing for myeloperoxidase levels.approximate 1000 samples

Description:
UAE Materials Laboratory needed for ASTM Testing: Properties of Polyethylene:- Brittleness Temperature - as per ASTM D 746 Dielectric breakdown voltage as per - ASTM D 149

Description:
Georgia USA food laboratory needed for ingredient percentage breakdown will send 5 oz sample

Description:
Alberta Canada agriculture laboratory needed for hay testing for suspected straw mites in timothy hay.

Description:
Hyderabad analytical chemistry laboratory needed for coal testing fixed carbon ,ash , volatile, moisture

Description:
India Electrical Laboratory needed for EMI & EMC TESTING 1 Rectilinear Potentiometer Penny & Giles SLS-095-075-3K-P-66 1 2 Single Turn Potentiometer Coudoint PR18 1 3 Load Cell Honey Well 141 (AL414DR,1A,2U,6A,13B,15A) 1 4 Multi Turn Potentiometer Sensor System Model MD-09 1

Description:
India Pathology Microbiology Laboratory needed for microbiology testing laboratory test

Description:
ISO and FDA GMP Bioanalytical laboratory needed to Develop and validate methods used to determine antibiotic concentration in growth media and solvents, using HPLC and / or LCMS."

Description:
USA FDA/FAA certified laboratory needed for FDA /FAA certification testing of our green cleaner °reser we have EPA listing please call gideon cell# 702-273-9200

Description:
Clinical Laboratory needed for serum testing or plasma analysis for Coenzyme Q10 multiple samples (>100)

Description:
Eastern USA geology laboratory needed for ASTM core analysis of core samples and bulk pit samples Sample count could exceed 400. Test of exploration core samples and bulk pit samples to determine the % content of kyanite, silica, and pyrite and/or iron oxide

Description:
India Sensory Laboratory needed for perfume testing

Description:
Mexico EMA Accrediation, USA based laboratory needed for Industrial Hygiene Testing to STMP, OSHA and NIOSH methods

Description:
USA NPDES Certified Laboratory needed for TPH by EPA 418.1. This method uses Freon, and is no longer approved by the EPA, but my client's database is with this method, and they do not want to change

Description:
USA Electrical Laboratory needed for UL Testing: 1 sample for UL 181 Erosion resistance. request from client (item 2 only): 1. We have an electrical connector (one metal sample) in which the components (rubber, metal, plastic) must be "mercury free". No metal is expected. 2. Please quote UL 181 Erosion Resistance testing for one material.

Description:
North America Packaging Laboratory needed for packaging testing of metal coils in wooden crates made from wood. We do not know how high these crates can be stacked when full. We need someone to perform destruction testing on these crates. We will provide a number of empty crates for the test.

Description:
FDA Genetics Laboratory needed for genetics testing: Cytochrome P450 enzymes 2D6, 3A4, 2C19,3A5,2C9. MTHFR, Factor II-V Leiden.

Description:
Electrical Laboratory needed for IEC tests to IEC 60811-3-1, subclause 8.2 IEC 60811-3-1, subclause 9.2IEC 60811-1-4, subclause 8.4. These tests only need to be performed once on a completed cable. IEC 60811-3-1, subclause 8.2 Pressure test at high temperature IEC 60811-3-1, subclause 9.2 Heat shock test IEC 60811-1-4, subclause 8.4 Elongation test at low temperature I have copies of these sp ...

Description:
USA Bioanalytical Laboratory needed for bioanalysis assay and methods for hydralazine

Description:
USA Oil Materials Laboratory needed for ASTM Testing to ASTM method: D2786, Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass 10 samples

Description:
FAA Transportation Laboratory needed for FAA Photometry testing on reflector. Looking for how much percentage of reflectivity on a scale of 1 to 100% i could get from the reflector. Sample size 1

Description:
Materials Laboratory needed for non destructive testing and ASTM Testing: X-Ray/Gamma Ray Inspection Radar Inspection Ultrasonic Inspection Dye Penetrant Inspection Magnetic Particle Inspection

Description:
Food Laboratory needed for flaxseed oil testing

Description:
USA Oil Laboratory needed for ASTM Viscosity testing and ASTM pour point testing for failure for gear oil in Greenland at temperatures in the -40 to -54 deg. F range. We have two samples from the field and one sample from our factory. Would like to have the pour point and viscosity of all samples tested.

Description:
FDA GMP Analytical Chemistry Laboratory needed for GMP Testing: Total Nitrosamine Content by ATNC

Description:
India Packaging Materials Laboratory needed for packaging testing: Optimized temperature and compression pressure or torque for induction heat sealing of wax coated liners with sealant layers of plastics on aluminium foil laminated with pulp or foam backing.

Description:
UK physical laboratory needed for optical testing.. Compare light transmittance between two touch sensor variants. Construction 1: 4mm plain glass 125µm PSA PET hard coat film AR film Construction 2: 4mm AG glass 125µm PSA PET hard coat film

Description:
India consumer products laboratory needed for ASTM or BIS flavor Testing. Determine flavour concentration in toothpaste samples. also we need to determine flavour release from the toothpaste sample

Description:
New York metallurgical laboratory needed for heavy metal analysis for Arsenic, lead and mercury

Description:
International mining company producing aggregates for the construction needs oil laboratory for scheduled oil sampling (SOS)of our crushing and screening Equipment.

Description:
Analytical Chemistry Laboratory needed for ingredient testing. Determine the content of cascarosides in Cascara Sagrada Powder. One sample.

Description:
Environmental Laboratory needed for series of test run in a 30K sq foot factory to establish environmental analysis. Goal is to develop a HACCP system and safe work environment for food production facility

Description:
Medical Device Materials Laboratory needed for ASTM Testing to ASTM D695: comparative compression strength test on two mouth guards, one manufactured by ourselves, and another by another company. Need to know cost, test turnaround time and sample sizes needed. Please respond accordingly.

Description:
Product Safety Laboratory needed for ISO Testing. ISO 11611 tests on welders Clothing

Description:
Fuel Laboratory needed for fuel testing of new product line with our customer base.Biodiesel 9000 testing and ASTM Testing: Fuel Quality Test, Fuel Ecomony Testing, Emissions Testing We are looking for a company that can develop a testing protocol, and implement it on the ground with our customers.

Description:
India materials laboratory needed for rheology testing

Description:
UK Electrical Laboratory needed for UL Short Circuit Testing 100,000 amp short circuit UL Follow-Up test program

Description:
Textile Laboratory needed for towel testing. I want a report on sample of towels. 24 x 48. I want to know about the quality and strength of the product.

Description:
USA FDA Laboratory needed for wine testing: Alcohol content 6.5 % abv

Description:
Doctor's office needs Eastern USA clinical laboratory for uranium isotope testing, I have a family with elevated levels and would like to see if can identify if an ongoing exposure from environmental sources vs prior exposure. Is this possible to identify isotopes in clinical testing?

Description:
India laboratory needed for USP analysis

Description:
India Polymer Laboratory needed for reverse engineering product

Description:
USA FDA GMP Laboratory needed for identity testing for several ingredients and final batch testing for our products. We are looking to forge a longterm relationship.

Description:
Canada microbiology laboratory needed for skin care product preservative efficiency to be challenge tested.

Description:
USA Food Laboratory needed for antioxidant and caffeine testing for: 2 samples for antioxidant and caffeine content testing

Description:
USA analytical chemistry laboratory needed for Deformulation analysis of a topical pain relief lotion

Description:
Eastern USA Toxicology Laboratory needed for biocompatibility testing: Cytotoxic response on L929 mouse fibroblasts

Description:
USA Analytical Chemistry Laboratory needed for USP Testing: ICP-OES

Description:
India analytical chemistry laboratory needed for Guar Meal testing for: 1 NFE (Nitrogen-Free Extract (Carbohydrate)) 2 AME (Apparent Metabolizable Energy) 3 ADF (Acid detergent fibre) 4 NDF (Neutral detergent fiber) 5 TME (True Metabolizable Energy) 6 Total Amino Acids 7 Free Amino Acids 8 RUP (Rumen undegradable protein 9 AP (Available protein) 10 Crude Protein 11 Crude Fat Pl ...

Description:
Illinois EPA analytical chemistry laboratory needed for EPA stability studies to obtain a one year shelf life

Description:
Illinois EPA chemistry and toxicology laboratory needed for EPA product chemistry, 6 pack toxicology A540 EPA registration of a hard surface disinfectant spray.

Description:
Estonia / Finland metallurgical labroatory needed for mineral analysis of drying and grinding copper mineral

Description:
India Geology Laboratory needed for columbite-tantalite material testing. want full assay report

Description:
South Africa analytical laboratory needed for oxygen testing to the MIL-PRF-27210H specification. Please provide quote and sample requirements.

Description:
India polymer laboratory needed for testing plastic materials

Description:
Environmental Laboratory needed for water testing 1. drinking report 2.Efflent water 3. Raw water

Description:
Analytical Laboratory needed for SS 316 ball 8 mm & 10 mm chemical & harness tests.

Description:
Analytical laboratory needed for 1. Analysis of the components, microbiology and heavy metal testing for each batch of the product 2. Accelerated and real time stability testing

Description:
West Coast USA Industrial Hygiene Laboratory needed various employee screenings

Description:
Food Laboratory needed to reverse engineer a food product.

Description:
USA FDA Laboratory needed for tequila testing for harmful substances. After 2 months of storage a couple of floaters started appearing in the bottles, but they dissolved when shaken. We believe it's just the colorant added to achieve the desired color, but we need to make sure the heat while in storage hasn't made our product unfit for consumption.

Description:
USA FDA GMP analytical chemistry laboratory needed for leachability testing for DMF, HFIP, THF, and ethanol analyzed for the presence of other substances. I'm looking to find out if a certain material leaches into my product that will be made into an implantable medical device.

Description:
USA ISO Clinical Forensics Laboratory needed hydrogen sulfide in post mordem blood and/ or lung tissue.

Description:
Washington sensory laboratory needed for sniff testing 9000 units of finished product formulated to be fragrance free however in the filling a small amount of fragrance entered the product. We need someone with sensory expertice to go through each piece to determine which items have fragrance present.

Description:
USA Optical Laboratory needed for mirror specular reflectance testing service. 1. Measure absolute specular reflectance at 45° AOI over the spectral range 430 - 1000nm for 5 locations on mirror 2. Part is a first surface mirror a. Size: 35 x 26 x 1.25 inches b. Weight approx. 30 lbs c. Backing material has screw holes for handling and mounting

Description:
Canada GLP Microbiology Laboratory needed for GLP disinfectant efficacy testing against Norovirus for DIN submission

Description:
USA Laboratory needed for GPA Testing to GPA 2130 and GPA2106, extended analyisis of oil and gas samples collected from produciton equipment

Description:
Eastern USA metallurgial laboratory needed for Analysis of one sample of metal or alloy found in an archaeological dig at site of former iron foundry in NYC. Material found in crucible-

Description:
USA agriculture laboratory needed for testing ground peanut hulls for foreign material. ex: weed stems ,sand or soil, peanut hay

Description:
Europe analytical chemistry laboratory needed to measure the concentration of some plant growth regulators in a liquid solution which is going to be used as fertilizer, Specifically, we would like to measure: 1. indole 3-acetic acid (ÉÁÁ), 2. abscisic acid(ABA)or other Gibberillins (GA3,GA1), 3. 1-aminocyclopropane-1-carboxylate deaminase (AAC deaminase). We think that all these plant growth regul ...

Description:
INDIA ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR URGENT ANALYSIS OF FRAGRANCE BY GC-MS.

Description:
Pharmaceutical Laboratory needed for on going accelerated stability testing for various pharmaceutical OTC products.

Description:
Industrial Hygiene Laboratory needed for hearing testing. hearing tests in my workshop area to find out what type of hearing protection is needed"

Description:
Australia bioanalytical laboratory needed for ASTM 1053 for virus testing of Adenovirus, Hepatitis A virus, HEpatitis C virus, Vaccinia virus (Elstree strain), and Polyoma virus (SV 40) strain 777.Need to test in triplicate.

Description:
US FDA GMP microbiology laboratory needed for USP Testing of D.I. water

Description:
Washington Sensory Laboratory needed for on-site odor testing of a fine fragrance liquid cosmetic

Description:
ISO A2LA and FDA GMP analytical chemistry laboratory needed for GMP Testing of: phosphorous (element) and phosphate ion analysis on liquid samples

Description:
FDA GMP Packaging Laboratory needed for transportation Shipping testing of box (12"X10"X10") containing two bottles of benign solutions.

Description:
ISO 17025 Food analytical chemistry laboratory needed for chloroform testing in strawberry with method accredited in ISO 17025

Description:
USA Toxicology Laboratory needed for Biocompatibility Testing on mouth guard Cytotoxicity Testing - ISO 10993-5, USP 87 (invitro) Sensitization Testing - ISO 10993-10 (in vivo) Irritation Testing- ISO 10993-10 (in vivo)

Description:
West Coast USA Food Microbiology Laboratory needed for Norovirus Testing in frozen strawberry from Perú (2 samples)

Description:
USA microbiology laboratory needed for yeast testing. Test mannans and betaglucans in inactive yeast products. Also need protein, fat, fiber, ash, etc. but have not found a lab able to test for these and mannans and betaglucans. Would be happy to find a lab that can do all of these tests. Will submit 2 to 4 samples per month.

Description:
USA bioanalytical laboratory needed for IL-1, LDH screening tests using skin equivalent inflammatory markers IL-1a, LDH to screen topical formulations

Description:
Southwest USA FDA GMP analytical chemistry laboratory needed for oil testing. Test to determine compositions of two different oil compounds to use as lotions on body.

Description:
India Mechanical Laboratory needed for mechanical testing: Need to test Bearing Internal Clearance. Need to check surface finish value of bearing inner ring & Outer ring raceways.

Description:
Canada or Europe Materials Laboratory needed for materials testing: Atomic absorption of Si

Description:
USA FDA GLP Toxicology Laboratory needed for OPPTS Toxicology Testing: Acute Oral Toxicity - Up & Down (OPPTS870.1100, OECD 425) Limit Test - 5000mg/kg Acute Dermal Toxicity (Rats) - OPPTS 870.1200, OECD 402) Limit test, 10 rats, 14 days Primary Skin Irritation (3 rabbits) (OPPTS 870.2500, OECD 404) 3 rabbits, 72 hours

Description:
PHYSICAL LABORATORY NEEDED FOR FLEX CYCLE TESTING AN 18" LENGTH OF BUNGEE CORD INSTALLED IN A FLEX APPARATUS EQUIPPED WITH A MOVABLE GRIP WHICH RECIPROCATES TO PRODUCT FROM 10%-50% ELONGATION AT A FLEXING FREQUENCY OF 30 CYCLES PER MINUTE IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-C-5651 PARAGRAPH 4.6.4 THROUGH 4.6.4.2

Description:
India Manufacturing Laboratory needed for nutraceuticals

Description:
cold crake temperature test for PVC Compound(Solid)

Description:
India physical acoustics laboratory needed for tdma noise testing

Description:
Austin Microbiology Laboratory needed for microbiological analysis of water and raw food with 1-2 days TAT

Description:
Microbiology laboratory needed to identify species of bacteroides from a stool sample."

Description:
INDIA FDA GLP ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR BRITISH PHARMACOPOEIA BP TESTING: GENTAMICIN BP FOR RELATED SUBSTANCE AND COMPOSITION AS PER BP

Description:
USA physical laboratory needed for thickness Testing. Test gold plating thickness in a .1x.1 inch area/location on a battery contact strip (12 contacts, each contact measures approximately .125" x.750".

Description:
Food Laboratory needed for food testing. We need quantitative results for all specific types of fiber in sample. I need more than just soluble and insoluble analysis that most labs offer.

Description:
USA FDA GLP Preclinical Laboratory Contract Research Organization needed for In-Vitro Testing: In vitro assays to gauge efficacy of treatment agents in addressing autoimmune modulation in the presence of mastitis-induced inflammation and infection, to include inflammatory agents such as PMA for positive control as well as three (3) known bovine mammary pathogens. Up to six (6) test samples will be ...

Description:
Europe ISO, FDA GLP analytical chemistry laboratory needed for quantitative testing of menaquinone composition in vitamin K2 powder. We are interested in the comparative analysis of 3-4 different vitamin K2 samples. Is it possible to optimize HPLC methods, based on different hydrophobicity of MK-n forms for quantitative determination of menaquinones in vitamin K2. If yes, we are interested in t ...

Description:
Australia and USA Energy Laboratory needed for DIN standards testing. The proper wind energy test rig will be necessary for the tests. FE8, FZG, FVA Tests for Wind Energy Lubricants We hope to hear from you if you offer any one of these three tests in America or Australia.