Laboratory Test Requests

Description:
EPA laboratory needed for ISO 10993 and/or The Ex Vivo Porcine Skin Test. testing of a device that converts an aqueous saline solution into a cleaning & disinfecting solution by electrolysis. We would like to make a claim indicating that at 200 ppm FAC and 400 ppm FAC the resulting solution is harmless to skin and other human and animal tissue including eyes. We believe that to make these claim ...

Description:
Canada laboratory needed for compliance safety testing of Baby Wooden Teether to comply with Canadian regulations

Description:
India geology laboratory needed for quicklime and hydrated lime analysis. Material to be tested through XRD/ Chemical analysis. Parameters to be tested are: SiO2, R2O3, CaO, MgO, Loss of Ingtion, Sulfur. Please send quote for analysis.

Description:
INdia materials laboratory needed for Carbon Residual Test As Per EN 723 For Brass And Copper Tubes

Description:
Mexico FDA GMP Food Laboratory needed for Nutritional panel testing for a beverage, including calories, plus sodium and potassium to meet FDA Regulations for the US.

Description:
CALIFORNIA OR TEXAS FDA GMP MICROBIOLOGY LABORATORY NEEDED FOR STERILIZATION VALIDATION TESTING OF ETO STERILIZED CONSUMER BANDAGES . 4 products one full container

Description:
Genetics Laboratory needed for full genome sequencing for Mycobacterium tuberculosis strains we isolate from our TB patients. Could you please let me know: 1. What will be the cost for full genome sequencing of M.tb DNA; 2. How many genomes can you process per batch/month/quarter; 3. is it possible if our project participant visits your laboratory and gets a short-time training (2-3 weeks), if yes ...

Description:
Analytical chemistry contract laboratory needed that can complete free ethylene oxide and limit of dioxane testing according to the USP monograph for nonoxynol 9, USP

Description:
India laboratory needed for rosin testing : acid number test for Rosin to IS 553

Description:
India laboratory needed for Iridium analysis heavy metal

Description:
Mumbai analytical chemistry laboratory needed for testing (Crystalline aluminosilicate) and activated alumina(Amorphous Alumino-sillica gel)

Description:
Food analytical chemistry laboratory needed for caffeine and chlorogenic acid testing of coffee product. 3 to 5 samples.

Description:
Physical Laboratory needed for certification testing of guardrail and handrails. Require load push testing 300 Lbs to 400 Lbs at the new SS guardrail and handrail installed

Description:
Cosmetics analytical chemistry laboratory needed to quantify mineral content for the purpose of validating a calibration curve.Need 0.1% accuracy. 72 samples.

Description:
Cosmetics analytical chemistry laboratory needed to test organic skincare product with vitamin C for trace benzene.

Description:
Large consumer products company needs Mumbai laboratory for vegetable oil testing to test the oxidative stability of vegetable oils supplemented with antioxidants under accelerated conditions using Rancimat instrument.

Description:
Engine manufacturer needs India material laboratory for epoxy testing: Thermal Coefficient of Linear & Volumetric Expansion of Epoxy after getting Hardened. 5 samples

Description:
Certification laboratory needed for Industrial Fabrics Association International for flame-resistant material CPAI - 84 on a tent

Description:
Europe analytical chemistry laboratory needed for hands and nails cream testing for ingredient testing for import to the US. Ingredients: AQUA, CAPRYLIC/CAPRIC TRIGLYCERIDE, GLYCERIN, GLYCERYL STEARATE SE, CETEARYL ALCOHOL, RICINUS COMMUNIS SEED OIL, HYDROGENATED CASTOR OIL, COPERNICIA CERIFERA CERA, COCOS NUCIFERA OIL, CETEARYL ETHYLHEXANOATE, GLYCERYL STEARATE, PHENOXYETHANOL, CAPRYLYL GL ...

Description:
India analytical chemistry laboratory needed for deformulation of an ointment for Material List (Recommended ingredient inside the liquid)

Description:
India analytical chemistry laboratory needed for pp clarifier testing (additive to improve clarity in pp) (1) haze% testing (hazemetre measuremnt) (2) Thermogravitic Analysis (3) Plate out comparision (4) Taste and odour performance (organoleptic comparision.)

Description:
INDIVIDUAL : ANALYTICAL CHEMISTRY LABORATORY NEEDED TO ANALYZE THE INGREDIENTS OF GENERIC HARVONI (LEDIFOS) TO DETERMINE IF IT MEETS GILEADS SPECIFICATIONS, I.E. ONE TABLET SHOULD CONTAIN 400MG OF SOPHOSBUVIR + 90MG OF LEDIPASVIR

Description:
Israel lab services needed for vitamin D analysis for the amount of vitamin D (2 & 3) in our marine micro-algal cell, which including extraction from the algal cells, and the distinction between the two types of vitamin D (2 & 3). 100 samples

Description:
Materials laboratory needed for analysis for kitchen paper and wet towel, (analysis such as paraben, alcohol, eligibility for health, migration, recycle ratio...) Please provide price and turn-around time

Description:
Paint manufacturer needs Materials laboratory for IS or ASTMTesting 500 Kg jumbo bags (FIBC) to be tested for specification parameters as per the standards applicable to them.Please let us know the IS or ASTM Standards relevant to Kg jumbo bags.

Description:
Europe accredited laboratory needed with accreditation for the scope of the test method in accordance with - EN 13500 - Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on mineral wool. Specification - Sample to be tested: Plastic - Qty: 4 Please send sample size required and turnaround time expected. For further information, plea ...

Description:
Cosmetics company needs cosmetics laboratory for Stability testing for face cream (moisturizer), Company will require help with sampling.

Description:
Food Laboratory needed for food microbial analysis and anti-oxidant testing for milk samples. There will be initially 3 samples. I would like to know what methods you use, what form do you require the samples to be, the required volume of samples, how long the analysis take and the price for each sample.

Description:
Materials laboratory needed for Mineral Identification testing in asphalt

Description:
California laboratory needed for Rockwell Hardness Testing for Aluminum pieces. 20 samples.

Description:
Third-Party Microbiology laboratory needed for ASTM microbial degradation of Polyethylene using a multi-strain inoculum and searching for a third party lab to confirm degradation using ASTM D7475 ? 11.

Description:
USA CRO needed that can determine the pka of my samples. What is standard & rush turnaround time, pricing, and quality system (ISO 9001, GLP/GMP prefer)?

Description:
Dubai metallurgical laboratory needed for ore testing or metallic ores to distinguish the type of metal within the ore.

Description:
Mumbai food microbiology laboratory needed for Antimicrobial assay of tomato extract.

Description:
India microbiology laboratory needed for Sterlity testing of pharmaceutical injection as per USP monograph. Samples: 20 vials

Description:
INDIVIDUAL: USA Geology Laboratory needed for metallurgical testing of rocks and gravel for gold and silver . 4 Samples

Description:
Cosmetics analytical chemistry laboratory needed for stability testing of 100% organic hand cream to make sure any possibility of harmful stuff may grow or exist on my cream

Description:
Toxicology Laboratory needed for Carcinogenesis Studies and Chronic Toxicity Testing Studies

Description:
Materials laboratory needed for IS or ASTM Testing of bags purchased from vendor: FIBC of 500 Kg capacity made up of HDPE to be tested for Elongation and breaking strength as per the IS or ASTM Standards applicable

Description:
Contract Test Laboratory needed for carbondioxide gas testing for conformity to IS: 15222 for use in fire extinguishers for fire fighting use

Description:
Nail polish manufacturer needs laboratory for nail polish testing: microbiology test, heavy metal test and so on. Company requires help with sampling. Please provide quote and instructions in detail what should we do? Best Felix

Description:
Contract Lab needed for Gas Chromatography, Residual solvent analysis to determine if solvent remains incompounds. We would like to submit a handful of samples for headspace GC.

Description:
Liquor importer needs NYC area laboratory for ingredient testing of Vodka. 5 samples

Description:
Aeronautical company needs laboratory for suface roughness testing on tube. Tube sample: 3.5 OD and 2.25ID Surface Roughness Test

Description:
University researcher needs India Materials Laboratory for ASTM Testing to ASTM D445 ASTM D93-94 ASTM D5453-93 ASTM D524 ASTM D482-91 ASTM D2015-85 GAS CHROMATOGRAPHY ASTM D4052-91 AOCS CD1-25 AOCS CD3 ASTM D2500-91 ASTM D97-93 ASTM D613 Kinematic viscosity Flash Point Sulphur Carbon Residue Ash content Higher Heating Value Fatty acid profile Density Iodine value, Saponific ...

Description:
Contract Lab needed for UL 1332 Moist Carbon Dioxide Sulfur Dioxide Air Test on 14 coated panels (1200 Hours)

Description:
I need to evaluate several different samples of Hot Melt Polyester Adhesive (in dry pellet form). I want to know the moisture content of each sample at room temperature and the viscosity at 235 C (455 F). Number of samples is 5.

Description:
Laboratory needed for Heavy Metals testing in an oil matrix. Specifically MCT and Olive oil.It should detect As, Cd, Pb, and Hg. Each should be quantifiable to no less than 1 ppm. Pb should be quantifiable to ~0.05 ppm. The uncertainty value should be relatively small.

Description:
Southeast Asia Laboratory needed for RTCA/DO-160G Testing of a WiFi entertainment distribution system for aircraft installation.Capability to test DO-160 Sections 4, 5, 6, 7, 8, 9, 15, 16, 17, 18, 19, 20, 21, 22 & 25.

Description:
Accredited food laboratory needed for nutritional value testing. Need prices and turn-around time.

Description:
Toxicology laboratory needed for LD50 testing on product that contains 1.5% hydrofluoric acid

Description:
I need to evaluate several different samples of

Description:
Pharma manufacturer needs pharmaceutical laboratory for polymorphism study of sterile pharmaceutical drug substance

Description:
Europe toxicology laboratory needed for study: nAchR test for nicotinic ganglionic acetylcholine receptor antibodies

Description:
large medical device manufacturer needs FDA GMP toxicology laboratory for toxicology testing: Modified draize-95 test to meet FDA requirement

Description:
Africa Pavement company needs polymer laboratory for Dispersion Test of the polymer modified binder using a microscope ( 100 x magnification). ASTM E 1508-12a. Is this possible? How should the sample be submitted in terms of quantity and packaging? How long will it take to get these results? The price?

Description:
Large oil company needs materials laboratory to perform Soil Cleaning Test by FED-STD-791 Method, 7502. Testing to be done on an isoparrafinic solvent with flash point ~ 220F.

Description:
Southeast USA electrical laboratory needed for electrical control panel testing of installed a conveyor system (brand hytrol), with 3 electrical control panels the individual components in the panel box are all ul listed but the panel box is not we need a certificate for our final inspection that requires the box to be safe

Description:
URGENT Africa Food laboratory needed for conducting acrylamide testing in Instant noodles.

Description:
Food nutritional laboratory needed for nutritional analysis on soy product.

Description:
Pharmaceutical bioanalytical laboratory needed for validation of in-house ELISA procedure for quantifying specific egg IgY antibody against certain microorganisms and subsequently perform the procedure to meet ISO/IEC 17025 standards.

Description:
India laboratory needed for quality control and safety testing of and dishwashing liquid and pine oil floor wax

Description:
USA Food nutritional laboratory needed for Nutritional analysis for nutrition facts label. Must include caffeine & major vitamin content, anti-oxidant

Description:
Contract manufacturer needs Australia cosmetics microbiology laboratory for the following microbiology tests 1. Preservative Testing 2. Shelf Life and Stability Testing 3. Bacterial and Fungal Testing

Description:
CHNS analysis required under GMP

Description:
Biomedical Laboratory needed with MRI Suite for MR headset testing. To be tested for attenuation and chamber noise test. anutation test and any sort of chamber testing along with applicable 510k Testing like RF heat

Description:
USA Packaging laboratory needed for sample corrugate box strength testing in terms of EU- Newton ECT (kN/m) For certification for EU - Newton ECT rating of 7.7 kN/m is sufficient for a corrugate box with dimensions of 18"x14"x8" and a payload of 25 lbs.

Description:
Northeast North America (Canada or USA) electrical certification laboratory needed for ANSI Certification of an electrical revenue metering system to the requirements of ANSI C12.20-2010.

Description:
Large coating company needs laboratory for coating testing: 8 Moist Carbon Dioxide-Sulfur Dioxide-Air Test per UL1332. 8.1 See 8.1 - 8.4 UL 1332 for details: UL rqmts 1200hrs Allenton Pnls: 2 scribed and 2 unscribed 8-Stg Pre-treatment CRCQ 4 X 9 specimens 2 scribed and 2 unscribed 8-Stg Pre-treatment HRPO 4 X 9 specimens ...

Description:
Washington geology laboratory needed for gold testing.

Description:
FDA GMP Biomedical laboratory needed for FDA testing of personal lubricants for 510k submissions Condom compatibility testing.

Description:
Materials Laboratory needed for Oil Flashpoint Testing to ASTM d93, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Testerflash point

Description:
Materials laboratory needed for ASTM flexible laminate testing to check the WVTR and UV transmission rate to ASTM F1249. If yes, please provide the details of sample size, cost, time period..etc.

Description:
Middle East analytical chemistry laboratory needed for chemical analysis of deep heat product. Please don't hesitate to contact of you have any questions. I'm looking to get this done asap so if you could provide me with a quote that would be great.

Description:
Analytical laboratory needed for surfactant testing: BOD and COD on a textile product that contains about 92% dibutylformate (CAS: 761-65-9) and 8% emulsifiers which is a blend of anionic and non-ionic surfactants.

Description:
Clinical Research laboratory needed for clinical trial that can evaluate the accuracy of several heart rate measurement devices and compare them to ECG while a subject is running on a treadmill. Looking for 10+ subjects.

Description:
Sports performance laboratory needed for GPS device evaluation to evaluate the accuracy of a GPS device and compare it to competitive GPS devices over the course of a ~3 mile run.

Description:
URGENT United States Materials Laboratory needed for DBL 5404 Odour Test for PPT40 Grade Resin... Please provide cost of this test ASAP.

Description:
Medical Device Manufacturer needs laboratory for disposable gown and drape testing to Association for the Advancement of Medical Instrumentation AAMI level of disposable Gown and Drape, we need to test AATCC 42, AATCC 127, ASTM F1671, ASTM F1670

Description:
Asia cosmetics analytical chemistry laboratory needed for testing to check the detailed ingredient list of a facial soap

Description:
INdia pharmaceutical company needs laboratory for X-ray diffraction XRD analysis

Description:
New York analytical chemistry labroatory needed for e-cigarette smoke chemical testing

Description:
Materials laboratory needed for ASTM Testing of laundry additives to ASTM 2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil

Description:
Large life science company needs India microbiology laboratory for microbial/genetic identification of Microbial colonies isolated from environment -Complete identification/genetic identification limited

Description:
Australia university researcher needs laboratory for DHA (Detailed Hydrocarbon Analysis) test for commercial gasoline standard knocking test in CFR engine fueled by Australia 91 gasoline. In order to interpret experimental results, we want to get detailed composition information of the commercial gasoline. Hao

Description:
Looking to find a new lab testing company to do the 3rd party testing of branched chain amino acid product. HPLC Testing on Leucine, Isoleucine, and Valine - Microbial Testing - Heavy Metals Testing - Residual Solvents Testing testing company:

Description:
Environmental laboratory needed for heavy metals testing of water and soil. Tests to include inorganic arsenic, methyl mercury, lead, and cadmium. The test should be able to detect at least to the level of 1 ppm.

Description:
Furniture manufacturer needs packaging laboratory needed for ISTA Testing of Furniture packaging. Testing to ISTA 2c level 3 or Rule 181

Description:
South Africa or Canada geology laboratory needed for clay soil testing 1. Total Organic Carbon (TOC) 2. Sorption Capacity 3. Cation exchange Capacity (CEC) and PH

Description:
United States cosmetics laboratory needed for Cosmetic & skincare safety and microbial challenge testing

Description:
Europe laboratory needed for cigarettes and tobacco testing:physical and chemical tests. (a) Smoke analysis of ciagrettes (b) Tobacco filler analysis (c) Cigarette physical tests

Description:
Pharmaceutical Laboratory needed for USP Testing to test parameters of gelatin following USP: protein, peroxide, ash content, SO2, heavy metal (Fe, Cr, Zn, As).

Description:
Cosmetics company needs clinical research and microbiology laboratory for skincare product testing: Sensitivity and Skin Irritation along with Microbiological Quality Testing: Colonies (CFU/ml) <10, Modes & Yeasts (CFU/ml) <10, No Fecal Coliforms, No Staphylococcus aureus, No Pseudomonas aeruginosa (sorry I used google translate, so not sure if they are correct) Heavy Metal/Toxicity testing: no ...

Description:
Microbiology Laboratory needed for microbial testing of cosmetics product for Bacillus cereus. Please specify How much will it be and how long do you need? How many samples of the product you will need to do the test? Waiting for your response. Thank you

Description:
India Food laboratory needed for proximate analysis of tea samples

Description:
Automotive laboratory needed for validation testing of VW 50180 automotive waddingfor compliance to PV3015, PV3341, PV3900, PV3925, PV3942

Description:
Our formulation consists of coated gelatin size 0 capsules (methacrylate polymer/enteric coating). I would like this coating characterized for homogeneity in polymer material and thickness across the complete capsule. (Raman, Terahertz, etc.)

Description:
USA pharmaceutical preclinical contract research organization needed for study using sternum infection model. The model will allow us to test the efficacy of product intended to prevent surgical site infections. Must also have in-house microbiology unit.

Description:
INDIA BIOANALYTICAL LABORATORY NEEDED FOR BIOANALYSIS OF NATIVE TYPE II COLLAGEN BY ELISA

Description:
Bakery needs Canada Laboratory for nutritional testing of baked goods to ensure conformance with all Canadian food standards and are curious on pricing to do so.

Description:
URGENT: USA environmental laboratory needed for two European Union studies on compound tetrakis (hexylmethyl)phosphonium sulfate (THPS), which they registered for use for bacterial control in recirculating water handling systems for wells associated with oil and gas pipelines We will need quotes for work on each of two studies as follows: 1 - A price quote for an EU Aerobic Biodegradability St ...

Description:
India Environmental Laboratory needed for particulate pollution / particulate matter testing PM2.5 and PM10. Analysis for trace metals by ASS

Description:
Oil laboratory needed to test oil specifications report on the used residual oil

Description:
EPA Environmental Toxicology Laboratory needed for toxicity testing done for a pesticide adjuvant as per EPA dermal, and optic toxicity testing protocols

Description:
USA laboratory needed for Bergmann Junk NC Stability testing of Nitrocellulose as well as smokeless gunpowder

Description:
United States environmental microbiology laboratory needed for Microbial Analysis of the concentration of e. Coli in samples of water

Description:
Manufacturer needs Consumer Products Safety Toxicology Laboratory for product safety and toxicology testing of fabric-based product.for - Cytotoxicity testing. - Sensitization testing. - Irritation or Intracutaneous Reactivity Testing - Specific testing on Urethane materials: 0 mmHg for 3s to 150 mmHg and hold for 3s for a minimum of 100,000 cycles.

Description:
INDIA FOOD LABORATORY NEEDED FOR FOOD ADDITIVES TESTING TO TEST LIQUID FOOD COLORS AND POWDER FOOD COLORINGS, FLAVORS PRESERVATIVES AND INGREDIENTS SUCH AS , GLYCERINE, PROPYLE GLYCOL, STARCH, DEXTROSE, LACTOSE

Description:
PhD scholar needs India preclinical contract research organization for in vivo study on and I gastroretentive formulation.

Description:
USA genetics laboratory needed to Establish and run reporter gene assays in bacteria. It would probably employ a standard reporter strain strategy that places lacZ under the control of endogenous promoters to assess expression of specific proteins. Readout would be ?-galactosidase activity using standard protocols.

Description:
Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 Samples are water based polyurethane resins.

Description:
FDA GMP Bioanalytical Laboratory needed for Pulsed-field Gel Electrophoresis PFGE analysis - genomic bacterial DNA (cut with restriction enzyme): running and visualizing PFGE gels. We need it as a release test of produced Master cell banks.

Description:
Environmental laboratory needed to conduct analysis of methylamine and trimethylamine in ambient air samples. -Methylamine (CAS 74-89-5) -Trimethylamine (CAS 75-50-3). Can you email me the following: -IF you can do amine analysis in AMBIENT air samples? -IF you can analyze for BOTH methylamine and trimethylamine? -IF you also identify other amines in the samples? -IF you can include any interpreta ...

Description:
Dubai geology laboratory needed for ore testing of: iron ore , Copper ore, Bauxite Limestone, Pozolada, Gymsum, Manganese ore

Description:
India Food Laboratory needed for honey certificaiton testing.

Description:
Materials laboratory needed for ASTM testing of roof coating to ASTM D 6083Standard Specification for Liquid Applied Acrylic Coating Used in Roofing or to ASTM C 1549 or ASTM E 1918

Description:
Massachusetts cosmetics laboratory needed for formulation and stability testing for shampoo, wash out conditioner, leave-in conditioner, face wash and a daily hair moisturizer. Need stability tests performed that ensures consistency, all-natural ingredients, excluding all chemicals. Has to hold up to Whole Food standards. This list of excluded chemicals can be sent per request.

Description:
Materials Laboratory needed for ASTM Testing of paint and coating to ASTM D7855, Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

Description:
ISO 17025:2005, FDA registered , cGMP USA pharmaceutical analytical chemistry laboratory needed for potency testing for Hyaluronidase Human Chorionic Gonadotropin (hCG) (monograph available online) Phosphatidylcholine/Deoxycholic acid (PPC/DC)

Description:
Southeast USA microbiology laboratory needed for Settle plate air test for SQF /HACCP food packaging aerobic plate count, enterobacteriaceae count, mold count, total coliform and yeast count.

Description:
Midwest Microbiology laboratory needed for microbiology testing: Settle plate test (enviromental. air) for aerobic plate count, enterobacteriaceae count, mold count, total coliform and yeast count.

Description:
I need to get analyze Chondroitin Sulfate Sodium for ELECTROPHORETIC PURITY

Description:
India laboratory needed for testing in relation to technology transfer

Description:
Nutritional supplement company needs microbiology laboratory for testing antimicrobial activity of grapefruit seed extract.

Description:
Large food company needs food laboratory for HPLC testing for 3 hot sauces.

Description:
Materials laboratory needed for Fabric Testing required for anti radar on fabric used for camouflage nets as per MIL/BS standards.

Description:
ILAC Accreditated Laboratory needed for ece r 16-04 safety belt tests & test reports

Description:
Materials laboratory needed for ASTM Testing: Abrasive resistance test on our Abs Glass filled material as per ASTM D 1044. Please specify testing feasibility and time duration and quote to proceed further .at earliest. Immediate replay on this will be highly appreciated and looking forward

Description:
Microbiology laboratory needed for microbiology and safety certification testing of cleaning product that we would like to have tested and certified in order to market it within the United States. We would like to prove that our product: * does not irritate the skin * is safe to ingest if done accidentally * can remove odors * can remove pesticides * is anti-bacterial * is 100% water ...

Description:
Preclinical Laboratory needed for Biocompatibility Study for implant material SS 316L as per ISO 10993 , Biological evaluation of medical devices

Description:
Biomechanical Laboratory needed for mechanical testing of orthopedic implants for CE/ FDA certification

Description:
India laboratory needed for testing FRP ladder break strength to be tested along with Breaking strength Weight bearing capacity Thickness

Description:
Materials Laboratory needed for ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials Lab testing quote for Flame Spread. One sample

Description:
Electrical compliance laboratory needed to test LED christmas lights to obtain certificate of conformity if christmas light pass safety test

Description:
Small producer of olive oil needs laboratory for testing required to sell in in Guatemala .How much does it cost?

Description:
Pharmaceutical toxicology labroatory needed for toxicologyt esting: 1. Toxicity testing of furan fatty acids 2. Test furan fatty acids in mouse model of atherosclerosis (LDLR-ko, etc.)

Description:
Materials Laboratory needed forISO footwear testing: abrasion test on footwear outer soles based on International Organization for Standardization test method 20871, which is an abrasion resistance test intended for all outer soles irrespective of material? If so, is your lab performing this test located in the United States?

Description:
India materials laboratory needed for coatings testing: 1. Polyester Fabric PU Coating Test. 2. Polyester Fabric PVC Coating Test.

Description:
Incense manufacturer needs India Analytical Chemistry Laboratory for deformulations testing of incense diluted with diethyl pthalate (DEP)

Description:
Medical Device Product Safety Laboratory needed for Stability Testing and Biodegradability Testing of Nature latex foley balloon catheter ,Scalp vein sets, feeding tube (PVC) ,and other surgical disposable product to ISO 10993, Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process 1.In vitro cytotoxicity test 1.3test on extract 3.Irritation te ...

Description:
Materials Laboratory needed for Thermal testing for BTU levels of bag house dust

Description:
UK Pharmaceutical Laboratory needed for turbidity and particulate matter testing of a freeze-dried cytotoxic pharmaceutical material. 9 vials to be tested. Vials tio be reconstituted and tested for turbidity and particulate matter (suspected silicon oil contamination)

Description:
Asia microbiology laboratory needed for challenge test (inoculated pack) on potential pathogens for food intermediate. The product is intermediate moisture food in normal atmospheric temperature and the concerned pathogens are S. aureus & Salmonella, ?L. monocytogenes and C.botulinum.

Description:
Africa geology laboratory needed for Laboratory Testing of Non-Evacuated & Expanded Perlite (P05) Thermal conductivity, Moisture content, pH, Particle size, Density

Description:
Food analytical chemistry laboratory needed: sweetener enhancer product tested for residual ethanol via a GC-MS method.Can you let me know how much material is required for the test, how long will it take and how much does this test cost? Thank you

Description:
Materials Laboratory needed for ASTM Testing of porous pipes to ASTM D638 Tensile Test, Elongations test Fluid friction coefficient test and Consistency factor (Cv) test

Description:
Environmental simulation laboratory needed for accelerated simulation testing that simulates ocean shipping environmental conditions experienced shipping from Asia to us on the ocean. The material is a molded EVA that I need to understand dimensional stability before and after the shipment process. Please reply with contacts who could provide this in an accelerated manner. South east Asia based ...

Description:
ANalytical chemistry laboratory needed for deformuation of a spice mix (cayenne, chili, ...).

Description:
Canada Nutritional Laboratory needed for antioxidant testing in organic matcha green tea

Description:
North America laboratory needed for AOAC Hard surface disinfectant testing to AOAC 961.02

Description:
Analytical Chemistry Laboratory needed for Product deformulation/reverse engineering of a injectable vitamin cocktail with main ingredients consisting of Vitamin C and Pyruvic acid. Complete product deformulation consisting of active and inactive ingredients, as well as ingredient measurement, volume.

Description:
Midwest USA analytical chemistry laboratory needed for milk testing of antibiotics are in the milk (bovine milk) and I need to know how much of those antibiotics are in the milk sample.

Description:
Contract Test Laboratory needed for basic analysis of Nutraceutical products to issue specification report

Description:
California clinical research laboratory needed forconsumer testing of workout training apparel under physician's monitoring. Product testerneeds to test a workout apparel prototype for at least 7 days. We want to do on sight physicals and monitor the tester as he works out in the protype apparel. I would like an exclusive workout fascility in the Los Angeles area.

Description:
Candy manufacturer needs food laboratory for nutritional values testing. Please email me pricing.

Description:
FDA GMP or GLP Pharmaceutical Laboratory needed for of enramycin analysis (hydrochloride form) as a percent active ingredient in 3 animal antibiotic products. GMP or GLP protocols are not needed. The client just wants a quantitative # for the enramycin.

Description:
Contract Test lab needed for ASTM Testing of f Aluminum Honeycomb sandwitch panels as per standard ASTM/DIN mentioned in Specific requirement. Thanks,

Description:
India Microbiology Laboratory needed for EP or USP Testing of penicillin activity in D-penicillamine as per EP or USP monograph

Description:
Contract Research Organization needed for Molecular weight determination of hyaluronan (HA) ? According to the protocols from: 1. Cowman, M.K., Chen, C.C., Pandya, M., Yuan, H., Ramkishun, D., LoBello, J. et al.Improved agarose gel electrophoresis method and molecular mass calculation for high molecular mass hyaluronan. Anal Biochem. 2011; 417: 50?56 2. Band PA, Heeter J, Wisniewski H ...

Description:
Hong Kong Textiles Laboratory needed for fabric testing: Dimensional Stability - ISO 5077 / 6330 2A at 80 degree & Tumble Dry Fabric Content - ISO 1833: 1977 Type of weave : Dissection method Threads per unit length - ISO7211 / Part 2: 1984 Yarn count - ISO 7211/ Part 5: 1984

Description:
Preclinical Contract Research Organization needed for preclinical study of test compand that prevents vascular permeability. Histamine skin prick or intradermal injection in rat.

Description:
URGENT: Environmental laboratory needed for water testing lab to determine if oil in water is vegetable or petroleum based.

Description:
US Bioanalytical laboratory needed for bioanalysis : protein analysis 1) Determination of the molecular weights of various proteins in a mix, and their quantitation. 2) Identification (sequence) of the major proteins 3) Identification of any post translational modifications (maybe)

Description:
SOuthwest USA laboratory needed for microwave radiation testing from appliances for compliance to FDA guidelines

Description:
Medical Device Manufactrer needs Biomedical Contract Laboratory to generate a pressure map of a device pressed against a surface (to simulate skin contact). We'd like to have a 2D heat map of the pressure exerted on the surface. I've seen a film that may be suited to this, but am open to alternate options.The resolution needs to be high enough to accommodate millimeter scale differences.

Description:
USA Pharmaceutical microbiology laboratory needed for antimicrobial testing: in vitro antimicrobial activity against a number of pathogens associated with bacterial vaginosis using vaginal gel.

Description:
FDA polymer materials laboratory needed for FDA compliance testing for resinous and polymeric coatings FDA Title 21 Section 175.300. Under (a) - (2) Coatings cured by polymerization, condensation, and/or cross-linking without oxidation.

Description:
Electrical laboratory needed for materials characterization for characterizing a commercial coaxialspecialty cableliterature.Resistance, loop resistance, capacitance, inductance, voltage rating, propagation velocity, shield coverage, operating temperature range.

Description:
Contract Laboratory needed for alcoholic beverage testing of ingreidents

Description:
Alcoholic Beverage manufacturer needs California food laboratory to test food grade ethanol proof.

Description:
USA automotive laboratory needed for SAE J2064 hose validation to test to to SAE J2064-2015 to do an initial validation of a new line of air conditioning hose and couplings in 5/16" 13/32" and 5/8". I will supply assemblies with whatever fittings are required by the lab.

Description:
New york CIty Area Sensory laboratory needed for pheromone testing in humans to determine the composition of pheromones and other compounds to replicate it as a fragrance.

Description:
Contract Laboratory needed for home appliance testing to issue a Test Report for EER SASO that Deep Freezers have capacity 200 , 300 and 500 Liters

Description:
United Kingdom University Researcher needs CRO clinical research laboratory needed for blood testing of blood samples from healthy volunteers tested.for - free tryptophan, total tryptophan, and large neutral amino acids (LNAAs) + genetic testing for two serotonin transporter genes (5HTTLPR and STPP), the monoamine oxidase-A gene (MAOA), and the tryptophan hydroxylase gene (TPH) For another set o ...

Description:
Large transportation company needs physical laboratory for Thermal cycle testing for water charge air coolers with below test requirements. Requirements are the following: There are 3 stages of thermal cycle testing (TC). Stage 1, stage 2 and stage 3. Stage 1 we will manage in house but we?d need assistance in performing stage 2 and stage 3. Stage 2: 2 parts will be given and can be run ...

Description:
Microbiology Laboratory needed for D-value testing in drug injectable product . D-value of the BI in drug solution & if not provide justification needed for FDA ANDA

Description:
Packaging laboratory needed for Food Packaging testing to comply with EU food Packaging requlations. We make a water based coating that can be alternative replacement for PE, PP, PET or CPET plastic films or plastic materials. Need to have microwave heating testing and high temp ovenability ratings for coated paper board packaging products. Would prefer a Euro based lab for familiarity with EU f ...

Description:
FDA GMP Polymer Laboratory needed for GMP Raw Material Testing: Polymer Testing for Melt Flow for High-density polyethylene HDPE

Description:
FDA GMP Pharmaceutical analytical chemistry laboratory needed for USP/NF Monograph testing for Soda Lime. Specifically, Identification, Loss on Drying and CO2 Absorbency

Description:
Materials laboratory needed for testing mixture of rosin, beeswax and activated charcoal heated on a open flame to determine malleability and ability to be cast into shapes at low temperatures

Description:
Microbiology laboratory needed for assays for studying zone of inhibition of anti-H. pylori activity. Please provide quotation

Description:
South Africa and/or Kenya Environmental Laboratory needed preparation of tender specifications for quantitative laboratory analysis of polychlorinated biphenyls (PCBs) in soil, oil, water and wastes. 2. Develop specifications for reagents to be used by laboratory for quantitative analysis of PCBs in soil, water, oil and waste. 3. Specify qualitative field screening/testing method, equipment & t ...

Description:
India laboratory needed for testosterone sustanon 250 testing

Description:
Marine Researcher needs analytical chemistry laboratory for water testing to determine the percentage of sunscreen released into brackish water by a high performance liquid chromatography analysis. Would your lab be able to do this?

Description:
Contract Test Lab needed for formulation testing of perfume /aroamatic/syenthic essential oil for compound and want to its formulation

Description:
University Researcher needs Agriculture analytical chemistry laboratory for sugarcane testing to determine chemical properties of natural fiber extract from sugercane i.e bagasse ash.I

Description:
Kolkata India analytical chemistry laboratory needed for SEM, TEM,

Description:
India Microbiology Laboratory needed for Anti Microbial Testing of anti-microbial coating

Description:
United States FDA GMP Consumer Products safety Laboratory for all testing needed for FDA certification registration document on all natural hair product

Description:
INSURANCE Oil Laboratory needed for contamination testing from diesel testing from truckWe've submitted 2 tests to our insurance company but now they say the results have to be certified. Can y'all help?

Description:
USA Contract Lab needed for Total Organic Carbon detection

Description:
USA Contract Lab needed to Identify and quantify unknown organic extractables and leachables released from plastic container to organic solvents using Direct injection GC/MS, Headspace GC/MS and UPLC/PDA/MS and then structural elucidation using library of extractables. OR other suitable and better method

Description:
US metallurgical laboratory needed for Gold Plated and Silver jewelry testing for silver content and lead. Initially about 12 different items.

Description:
INDIVIDUAL Food Laboratory needed for hot sauce testing for safety, ph, probiotic and nutritional analysis

Description:
Tyre manufacturer needs rubber testing of natural & synthetic rubbers,carbon black,silica SiO2,sulfur,zinc oxide,stearic acid,process oils,micro wax,rubber chemicals(accelerators,antidegrading materials,steel wires etc.

Description:
Physical Laboratory needed which has an accreditation for the scope of the test methods in accordance with IEC 60754-1 - Test on gases evolved during combustion of materials from cables for raw material of Silicon electric wire. I would appreciate if you could send me a ROM quote including sample size and turnaround.

Description:
URGENT Coconut oil producer needs Africa microbiology laboratory for produce full spectrum microbiology test on organic virgin oil. Matter of urgency as we will be exporting to Europe, USA and Dubai.

Description:
India Contract Lab needed to test on all alcohols available in a malted beer and in distilled spirits presence of ony metals. presence of methanol and other alcohols and their parameters

Description:
Organizaiton needs Microbiology Laboratory for MIC testing: MICs for the different kind of antimicrobials used in clinical practices for a Acinetobacter environmental strain (not a multidrug-resistant strain).

Description:
Pharmaceutical manufacturer needs physical chemistry laboratory to perform Partical Size Distribution test of Sugar Spheres using Sieve Shaker (Ro-Tap).

Description:
Geotechnical Laboratory needed for Laboratory Testing of Non-evacuated & Expanded Perlite (P05). Density, Moisture content, thermal conductivity, pH and Particle size

Description:
Microbiology laboratory needed for ASTM Virucidal efficacy test of disinfectant against MERS-Cov to ASTM E1053 method, Standard Test Method for Efficacy of Virucidal Agents Intended for Inanimate Environmental Surfaces

Description:
India genomics laboratory needed for genotoxicity testing of particulate matter on PGPR bacteria.

Description:
Packaging Laboratory needed for compliance testing of food packaging to Commission Regulation EU 10/2011 we need the overall migration test certificates for Laminated PP Woven Bags and Unlaminated PP Woven Bags with Liner with following criteria. The overall migration test has to be made for the simulants A, B, C, D1 y D2. List of food simulants Food simulant Abbreviation Ethanol 10 % (v/v) Food s ...

Description:
LONG-TERM TESTING Cosmetics Manufacturing Company needs microbiology laboratory to assist with and perform testing to start our environmental monitoring program and then perform quarterly testing. : -test the compressed air (a total of 19 sites)- we would like to test 5 different sites each quarter, so in a whole year we should have all the sites tested. -test the machineries as follows: -3 manual ...

Description:
Metallurgical Laboratory needed for compositie testing of fabricated aluminum alloy matrix composite reinforced with silicon: hardness testing, wear resistance and frictional testing

Description:
Materials Contract Test Laboratory needed for ASTM / or ISO Cloud Point Testing of 9MOL(nonyl phenol exoxylate) to ISO 3015:1992 and/or ASTMD2500

Description:
Exporter needs India textile laboratory for children's apparel testing

Description:
Physical laboratory needed for cut resistant testing to ANSI/ISEA 105 to test industrial glove cut resistant level. Please specify how much it costs and what's the lead time from sample receiving.

Description:
Textiles laboratory needed for shrink testing of 2 fabrics t 1 is 100% cotton. The other is a 94% cotton/6% spandex blend.

Description:
Pharmaceutical analytical chemistry laboratory needed for testing drug product encapsulated by polymer microspheres (PLGA) to determine the moisture content. Dissolve the microspheres with 70% Chloroform/Methanol or other applicable solvents to release any possible moisture in the microspheres. Karl Fisher coulometry won?t allow any chloroform so volumetric titration is required to do the testin ...

Description:
Food Laboratory needed for reformulation of a pastrami and salami seasoning blend for breakdown of ingredients to identify the spices and spice extractis in these blends.

Description:
Pharma company needs contract labroatory for X-ray diffraction XRD and Raman spectrometry analysis of Thin films (~100um thick) to determine polymorphic state of a suspended ingredient in the film.

Description:
Food analytical chemistry laboratory needed for ingredient testing in barley tea drink. Beverage formulation for commercialization for factory manufacturing.

Description:
India physical laboratory needed for cement strength test to meet either 425 kilograms per square centimeter, or 525 kilograms per square centimeter,

Description:
Medical Device Laboratory needed to perform a test that will measure the volume (or amount) of a gas which flows out from a bag made of silicone rubber. the bag is under pressure and i need to know how much gas got out of the bag in specific time.

Description:
Aerospace laboratory needed for RTCA DO-160,Testing for Commercial Aircraft

Description:
EPA LEED, USGBS Environmental Laboratory needed for Formaldehyde Testing in building products. Laminate truss, urethane foam adhesive, wallboard, blown in fiberglass insulation Looking for off gas rates and comparison with accepted limits vis a vis EPA, LEED, USGBC, and the like.

Description:
Cosmetics Manufacturer needs USA or Canada ISO certified laboratory for performing NDELA (nitrosamine) testing on cosmetics specifically on mascara. Please provide test method they use for this test including any details on anything that is different than a standard accredited method.

Description:
US contract lab needed for petfood testing: water binding capacity in a sample of wheat gluten. Greater than 150% is expected in this sample

Description:
Import broker needs FDA food laboratory for import testing of wide-variety of imported food products ranging from pure organic fruit juice to different fruit and paste in cans. Laboratory to perform 1) FDA testing for the FDA Labeling on those products, and 2) Performing the testing when those products arrived to US ports eventually. Please provide us the process and the guidelines if those of sco ...

Description:
Materials laboratory needed for breakdown voltage bdv testing of coatings

Description:
Food nutrional laboratory needed for milk testing: nutritional analysis of nutritional elements in milk samples, along with fat content in milk samples with omega 3 content broken down showing ALA exact content. along with calcium content and vitamin A content.

Description:
India food analytical chemistry laboratory needed for chemical testing in noodles.

Description:
Toronto Laboratory needed for Colou fastness wet and dry crocking testing

Description:
India laboratory for aerospace fuel testing to JET A1 the degradation of this product how can I see that through the lab test this JET A

Description:
USA Cosmetics laboratory needed for SPF certificaiton testing on two cosmetics products.Please provide pricing and turn around time.

Description:
Shipping wine to China and need laboratory for detailed analysis of wine prior to shipping to China

Description:
Polymer Laboratory needed for polymer synthesis project

Description:
India laboratory needed for performance testing for dry chemical powder for fire extinguishers which requires major time and area covers during suppression

Description:
URGENT: Microbiology needed for Mascara testing for Citrobacter freundii, Pseudomonas stutzeri, Xanthomonas maltophilia and Staphylococcus saprophyticus.

Description:
Nanotechnology laboratory needed for blending 5ml containers of nanoparticle and polymer blends . Please provide costs for a batch of 1 L of the material? They need to be measured and mixed in a centrifugal mixer.

Description:
Food laboratory needed for spice and seasoning blend testing for identity and concentration of ingredients

Description:
Pharmaceutical analytical chemistry labroatory needed for USP dissolution testing of softgels

Description:
SAMPLE PREPARATION: Large medical device company needs laboratory to prepare samples: Polish/grind circular disc that are 15±1 mm in diameter and 1.4±1 mm thick. Grind each specimen through diamond-embedded media having a nominal grit size of 30 ?m to 40 ?m and final polish on media having 15 ?m to 20 ?m diamond grit.

Description:
Optical laboratory needed for filter and testing for optical light transmission density. Company has cracked 16Ømm x 1mm thick filter that is part of camera system in a tool pre-setter. The pre-setter uses a camera and a light source to measure what appears as a shadow on a monitor. The filter seems to reduce the intensity of the light reaching the camera. We do not have any specifications for th ...

Description:
Organization needs European Union Laboratory for Triclosan testing in river sediment samples and fish

Description:
USA FDA GMP BIomedical laboratory needed for FDA medical suture evaluation of 8 suture samples

Description:
Pennsylvania, New Jersey or Maryland Medical Device Laboratory needed for Product safety and efficacy testing for nasal strips Scientific research for Efficacy to gaining insight on percentage of nasal airflow variances

Description:
US veterinary health / petfood laboratory needed for Dog Food testing . composition compared to ingredient listing; any chemical toxins present

Description:
Pharmaceutical analytical chemistry laboratory needed for analysis of pharmaceutical powders for Powder wettability, contact angle, Washburn method, tensiometer

Description:
Canada Food Analytical Chemistry laboratory needed for USP Testing of food grade Sodium Metabisulphite to certify that the product conforms to the USP's Food Chemical Codex (version 9) Sodium Metabisulfite monograph. I was hoping to learn: 1. If you could perform this service for us (or recommend someone who can) 2. What size of a sample you would require 3. Estimated cost 4. Estimated turnaround ...

Description:
Environmental toxicology laboratory needed for OECD six end-use product (EP) acute toxicity studies for US.EPA registration of a disinfectant according to the OECD test Guidelines. Acute oral toxicity?rat Acute dermal toxicity Acute inhalation toxicity?rat Primary eye irritation?rabbit Primary dermal irritation Dermal sensitization

Description:
Microscopy Imaging Laboratory needed for Scanning Thermal Microscopy on rock samples.100nm or sub-100nm resolution is required.

Description:
Contract Lab needed for radioactivity Testing of NORM contaminated piping Need levels of lead 210. Verify Radium 226 is not present

Description:
EU or USA Food Safety Laboratory needed for Food Contact Materials FCM safety testing of silicone baking tray to see if it meets EU and/or FDA regulation standards on FCM safety. We buy in the trays from China and want to ensure they are compliant with the regulations. They are sold to customers and used in a domestic environment.

Description:
URGENT Pharma company needs contract lab with very low detection methods for Measuring very low levels of hydrogen peroxide in hyaluronic acid solution, water or some other preferable solution.The detection level must be very sensitive to show that the hydrogen peroxide level is close to zero.

Description:
Lab service needed in NJ or Manhattan for beverage analytical power (total acidity, density, alcohol, viscosity, stability, etc...)

Description:
Biomedical laboratory needed for physical examination. for medical sutures

Description:
Bioanalytical laboratory needed to test of the potency of Erythropoetin according to the European Pharmacopeia

Description:
India polymer laboratory needed for quality control testing: Polypropylene sheet testing is required for judging its quality. we are planing to manufacture effluent treatment plant equipments from PP sheets.

Description:
Physical Laboratory needed to perform Salt Spray (fog) test for PTFE coated bolts (Fastener) as per ASTM B117

Description:
India analytical chemistry laboratory needed for testing the chemical composition of manufactured sand(M sand)

Description:
Bioanalytical laboratory needed for protein analysis. Protein needs to be sequenced from N-terminus up to 10 amino acids, Can you please send a quotation along with the procedure to be followed for sending the sample.

Description:
Physical Laboratory needed for salt spray test done to Requirement standard - ASMT B117 and should be Boeing approved.

Description:
LondonBeverage Laboratory needed for Vodka testing

Description:
USA Electrical Laboratory needed for UL certification testing of LED light assembly and complete electronic assembly imported from India.

Description:
India Physical Laboratory needed for determining thermal co-efficient of expansion tested for 72 glass fibre reinforced plastic (fibreglass) rods of various diameters.

Description:
Polymer lab needed for film testing that can run ASTM E 2178 but using CMU blocks instead of a thin film. The coating we are wanting to test is a water based air barrier which we are trying to certify to ABAA criteria.

Description:
analytical chemistry laboratory needed for analyte testing of the following analytes: (+) - catechins, (+)-Epicatechin, acid gallic and acid ellagic in tea leaves by LCMS. In your schedule do you provide a comparative test, to take part of

Description:
EPA Toxicology Laboratory needed for disinfectant testing: Local Lymph Node Assay needed for a quat based EPA registered disinfectant

Description:
USA Laboratory needed to test aluminum washers according to ISO 16232-5/6/7/8/10 including metallic and non metallic parts, residue wt (mg/cm^2), number of particles / cm^2 (>100, 200,300,600 um)

Description:
Materials laboratory needed for LEED and ASTM color testing of color supplied to the decorative cement market: 40 colors tested torASTM E 1980 to obtain the Solar Reflectance Index. This would be to comply with LEED 7.1 Urban Heat Island effect

Description:
USA Pharmaceutical analytical chemistry laboratory needed for USP testing on raw materials - Sodium Fluoride, USP (Identification A, Heavy Metals, Fluosicilate, & Acidity/Alkalinity) & Cetylpyridinium Chloride, USP (residual solvents).

Description:
USA pharmaceutical microbiology laboratory needed for antibiotic susceptibility testing for the organism Leifsonia aquatica

Description:
Ireland bioanalytical laboratory needed to test the hemocompatibility and coagulation times of human blood in a needle . to investigate different surface treatments to increase the coagulation times of blood within the needle lumen.

Description:
Contract Laboratory needed for Analysis of glycomacropeptide in UHT milk. There are no specified reporting limits or protocol. The client just wants identification and quantitation of the glycomacropeptide

Description:
ON-SITE Oman Contract Laboratory needed for valves and check valves inspection and now we retesting valves as per UL Standard 262 and 312 total quantity is almost 58,

Description:
Africa Enviromental laboratory needed to test soil and herbs for composition.

Description:
Racing company needs analytical chemistry laboratory for testing List the herbal contents of a tincture for pain relief.

Description:
Food Laboratory needed to test our juice for permit approval by the department of food and safety for wholesale AND to issue a Process Authority Letter.

Description:
Electrical Laboratory needed for CE Compliance Testing to the requirements of EU Council Directive 2004/108/EC, the EMC Directive

Description:
Texas Materials Laboratory needed for Flash point testing

Description:
UK Laboratory needed for ABV Testing of Bottled Beer to sell to pubs on November 29. Confirmation testing of ABV of 4% for compliance to labeling and to ensure brewery has not performed a secondary fermentation

Description:
USA EPA Environmental Laboratory needed for PM2.5 capability testing for air monitoring filters to EPA Requirements

Description:
Agriculture Microbiology Laboratory needed for antibiotic testing on animal feed. 1.Chlortetracycline 2.Procaine penicillin 3.oxytetracycline 4.tylosin 5.bacitracin 6.neomycin sulfate 7.streptomycin 8.erythromycin 9.linomycin 10.oleandomycin 11.virginamycin 12.bambermycins Please also indicate the testing method and the protocol.

Description:
Physical Certification laboratory needed for certification testing of Lighting fixture to sustain full load operation in temperature reaching 70 deg. C. in direct sunlight with high content of ultra violet rays to 2 luminaire as Z3430/34R & Z3415/17RB

Description:
EDUCATION PROJECT High School Science Students studying algae biofuel needs genomic lab that will test my algae culture to see if it is axenic or there are other organisms present.Please provide cost. As a student, cost is a very important aspect. The algae that I am using is Chlorella vulgaris UTEX 2714.

Description:
USA Healthcare Product Safety laboratory needed for requisite analysis of a pain relieving cream which is made from natural ingredients. We need this certificate of Analysis to sell this product on Amazon.

Description:
Materials Laboratory needed for ASTM Testing of porous pipes to ASTM D638 Tensile Test, Elongations test Fluid friction coefficient test and Consistency factor (Cv) test

Description:
University Researcher needs Ireland Toxicology Laboratory needed for for cytotoxicity study .

Description:
Medical Device Safety Laboratory needed for amazon safety testing Polypropelene Homopolymer contact lens case to sell on Amazon. Product testing document OR safety assessment document, whichever is the easiest and least expensive to obtain.

Description:
India physical laboratory needed to test Hardboard strength, water absorption etc. Kindly advice oncharges, time etc. with courier services

Description:
India Laboratory needed for oriental fruit testing

Description:
URGENT TAT Microbiology Laboratory needed for Total Col and Ecoli testing of bacteriological 100ml samples? Also how much extra does a rush sample cost?

Description:
Australia Agriculture Laboratory needed for SHU tests of chili peppers

Description:
Electronics Safety Laboratory needed for electrical safety testing of a belt that can communicate and charge batteries and phones of any other wireless devices

Description:
India physical laboratory needed for solar reflectance index (SRI) Testing

Description:
Independent laboratory needed for alcohol content and nutritional tests done on my fermented tea products.

Description:
Contract Lab needed for alcoholic health beverage testing all nutritional info and probiotic types and quantities to support claims of fighting the hangover disease in alcohol consumers. Beverage contains 5 ingredients: - filtered water - cinnamon - stevia - organic apple cider vinegar - vodka

Description:
URGENT SHORT TAT - Cosmetics Microbiology Laboratory needed for finished product and preservative efficacy testing on 3 formulated skincare products that need testing. Cosmetics Finished Product Testing Perservative Efficacy Studies Testing Product Safety Testing Analysis of contaminants Testing

Description:
Materials laboratory needed for Biodegradability testing to determine if liquid cleaning product is readily or ultimate biodegradable with percentage

Description:
LONG-TERM TESTING Large pharma need bioanalytical laboratory for Platelet Aggregation Testing of compounds in agonist and antagonist mode on a routine basis

Description:
Large company needs electrical laboratory for accelerated power cycling for a new 120v device

Description:
Analytical Chemistry laboratory needed for e-cigarette liquid testing to determine exact amount of PG and VG. Also the levels of PG-200, PG-300, as well as PG400.

Description:
USA Food Laboratory needed for Coffee and Milk Beverage Testing for stability and shelf-life, pH, nutritional analysis,and caffeine concentration.

Description:
Europe Pharmaceutical Laboratory needed with Validated method for the determination of hexetidine impurities, in the Hexetidine 0.1% mouthwash solution, is needed. We need a method for the determination of hexetidine impurities in the hexetidine oral solution. We'd like to help us to develop and validate method for this problem with the use of HPLC-UV-VIS or GC-FID instrumentation. If there is a ...

Description:
India Physical laboratory needed for corrosion testing to optimise corrosion paramets. Corrosion gravimetric method tests for mild steel and other coupons in aggressive environments by varying parameters

Description:
Europe or Middle East Laboratory needed for absorption testing of briquette made of biomass substances . We would like you to analyze the product and test it and find out the water absorption percentage and the ability of the product to store and keep water and the surrounding soil moistured. After receiving the information we can send you a sample of the product for physical test and then send ...

Description:
Food laboratory for coffee substitute testing for determination of caffeine concentration within a coffee substitute, which is brewed like standard coffee.

Description:
USA CONSUMER PRODUCTS LABORATORY NEEDED FOR SHOE TESTING: DROP TEST ON THE HEEL OF SHOES

Description:
Consumer Product Safety Laboratory needed for Product safety testing on skincare oil formulations: toxicology, dermal irritation and ocular irritation

Description:
Textile laboratory needed for Fabric testing for the Apparel Industry: dry clean testing, elongation testing, fabric thickness, fabric weight, shrinkage testing, tear strength testing. We are trying to compare two fabrics. Both fabrics have come from the same supplier and the supplier claims that they are the same fabric however they look, feel and fit differently and we would like a 3rd party pr ...

Description:
North America Geology Laboratory needed for Trace level analysis of As and Pb in fine grind nepheline syenite samples and low purity quartz materials

Description:
Apparel importer needs textiles laboratory for materials testing of waist trainer corsets: Style and compositiontesting on care label is 7023 latex 100% inner lining 96% cotton 4% elastano the outer lining is made of 90% Nylon and 10% elastan both lining glue to latex

Description:
Electrical Laboratory needed to Perform ESD test on ATV fuel system to SAE Standard at SAE J1645

Description:
Testing laboratory able to perform: Resistance to frictions of pipes and protective sleeves of automotive fuel systems

Description:
ISO 17025 Materials Laboratory needed for paint testing to VW Standard VW TL211 Table 2 section 1.3 Evaluation of effect paints in terms of differences in sparkling and graininess per VW 5019 & 1.4. Structure measurement system: wave-scan plus?

Description:
CONSUMER Analytical Chemistry Laboratory needed for determining approximate quantity of vitamin D in vitamin D pills (food supplement)

Description:
Plastics Materials Laboratory needed for Polytetrafluoroethylene PTFE Testing of PTFE UV transmittance in the 250 - 260 nm range Objective: To establish the % transmittance of a PTFE sample of : 1) 0.50 mm thick; Sample size = 1. 2) 0.30 mm thick; Sample size = 1. 3) 0.10 mm thick; Sample size = 1. Deliverable: A 1-to-2 page report in electronic format. The report should include methods a ...

Description:
USA Materials Laboratory needed for ASTM Testing of Adhesion of Solid Film Lubricants to MCL F-23 and ASTM D2510-94

Description:
USA New England Consumer Product Safety Laboratory for cosmetics safety testing of lotion, body wash, perfume and lip gloss beauty products

Description:
Europe preclinical contract research organization laboratory needed for biomarker study for the diagnosis and treatment of Myalgic Encephalomyelitis/Chronic Fatigue Syndrome/Systemic Exertion Intolerance Disease using mitochondrial dysfunction as the biological marker for diagnosis. We are looking for a laboratory with an international presence and broad spectrum of tests available to adopt a n ...

Description:
Plastics (Plasticised PVC) flooring manufacturer needs physical laboratory for combustion analysis of condensate from manufacturing operation that produces condensate. I am interested to have this liquid evaluated for future combustion purposes i.e. a power train or oil heating system

Description:
Pharmaceutical Central Laboratory needed for the following tests performed for clinical research: ? Comet assay for DNA damage ? Serum Reactive Oxygen Species (ROS) ? Serum derivatives of Reactive Oxygen Metabolites (dROM) ? Serum total Glutathione (GSH) ? Serum Malondialdehyde (MDA) ? Serum Protein Carbonyl (PC

Description:
Physical Chemistry Laboratory needed to quantitatively analyse the particle size and the level of amorphism. The analysis output of this two tests would be a statistical distribution of particle sizes, and a percentage of amorphous vs. crystalline phases. Please provide cost and lead time of this two analyses?

Description:
Consumer Product Safety Laboratory needed for Drop Ball testing of Class 1 Medical Device - Sunglasses. Testing of 500 units

Description:
USA or Canada toxicology GLP laboratory needed for biodegradation testing of a tannin based chemical used in water treatment applications (specifically used for wastewater coagulant/flocculant) that needs several tests done in order to qualify for inclusion on Canada's DSL.Testing includes: Ready Biodegradation Acute Oral Toxicity Information Sufficient to Assess Skin Irritation Skin Sensitiz ...

Description:
Accredited laboratory needed for FMVSS testing in accordance with FMVSS 106 standard hydraulic brake lines

Description:
USA Environmental Toxicology laboratory needed for the following OECD tests: OECD 301B, and F, Biodegradation OECD 202 , Daphnia sp. Acute Immobilisation Test , OECD 203,Fish, Acute Toxicity Test.

Description:
Environmental Laboratory needed for mineral analysis: Testing for rare earth minerals.

Description:
Canada Geology Laboratory needed for shale / sandstone sample preparation. No testing - just sample prep. Need 240 shale/sandstone samples powdered (need ~6 g powder from each sample)

Description:
Analytical Chemistry Laboratory needed for Boron materials Testing with a purity in the range of 99% (1% are impurities, 99% is amorphous boron). On such material the testing laboratory should verify the actual purity percentage and the chemical composition of the impurities; for each impurity the result should include the amount found. A typical output would be a table including all impurities an ...

Description:
Materials Laboratory needed for Constituent components testing of oil product generated from pyrolysis of scrap tires. Need to know all components and percentage by weight or volume.

Description:
Europe FDA GLP Preclinical Laboratory needed for Development and qualification for disulfide scrambling and determination of free SH, ATM release

Description:
East Coast USA FDA GMP Pharmaceutical Analytical Chemistry Laboratory need for stability studies on 4 OTC solid dose tablets CRT long term stability studies API and concetration determination to include dissolution

Description:
Contract Lab needed for valve testing for Leakage; Hydrostatic Strength; Maximum Flow Shut-off; Strength(bending moment, turning effort, impact); Continued Operation; Corrosion test; Marking Material Adhesion and Legibility.Tests according ANSI 4.6 - MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS)

Description:
Asia microbiology laboratory needed for challenge test (inoculated pack) on potential pathogens for food intermediate. The product is intermediate moisture food in normal atmospheric temperature and the concerned pathogens are S. aureus & Salmonella, ?L. monocytogenes and C.botulinum

Description:
North America Microbiology Laboratory needed for Hard Surface Disinfectant Tests

Description:
Preclinical Laboratory needed for Research Study with FITC-induced Delayed-Type Hypersensitivity model in C57/B6 mice

Description:
Contract Lab needed for Gossypol analysis in cottonseed

Description:
Consumer Products Safety Laboratory needed for Simple safety assessment on 3 products to satisfy Amazon requirements. Laboratory needed that has dealt with Amazon Health and Personal Care approval before.

Description:
Materials Laboratory needed for ASTM Testing of Erucamide slip counts in polyethylene pellets to ASTM D6953, Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) or other test methods

Description:
University Researchers need Asia sensory laboratory for slow release fragrance technology testing for markets in Asia.

Description:
Biochemistry laboratory needed for calibration of the sensitivities of immunoassay tests. We calibrate the sensitivities of the immunoassays using calibrators. We are interested in a lab who can assay controls for us to know the quantitative value of certain analytes in the control At the moment, we are interested to assay Drug of Abuse calibrators using HPLC or Gas Chromatography method. We ...

Description:
Energy company needs Netherlands Laboratory for XRD analysis of two solid samples to establish the contents of the solids.

Description:
India independent analytical chemistry laboratory needed for dietary food supplement testing: ingredient testing in nootropic stack with ingredients such as alpha gpc, choline bitartarate etc.. which will be used for cognitive enhancing purpose.

Description:
India Laboratory needed for biodiesel testing as per 15607

Description:
ISO 17025 or FDA GLP Accredited Test institute needed for catheter and catheter accessory biocompatiability testing of these materials according to related standards to Test Standard: 10993-1. We will focus on products which will stay more than 30 days in body. 2. nd product: Implantable Gel material Please give me price and make me informed about the procedure and accreditation status

Description:
New York City Geology Laboratory needed for Precious metal content in sample rocks. Percent of precious metal if any

Description:
Florida accredited bioanalytical laboratory needed for protein extraction and label analysis from an approved FDA food. Hydrolysis with nitrogen has been explained as a food grade method to break amino chains and provide a protein that can be used in a supplement powder

Description:
Africa Contract Laboratory needed for beer testing : brew test for barley and roselle

Description:
Pharmaceutical company needs Washington State USA area laboratory running CTX-ll test run on serum or plasma. 100 samples will be submitted for analysis in March 2016

Description:
USA genetics laboratory needed for Genetic Sequencing for Illumina testing- pediatric inherited disease panel and autism panel

Description:
Environmental Toxicology Laboratory needed for OECD Testing to,OECD 301 B, Biodegradation Testing OECD 301F and OECD 203 Fish, Acute Toxicity Test

Description:
Contract Research Organization CRO needed with experience and capability to measure Phopshocreatine, ATP, ADP content in cardiac and kidney tissue of rat via 31P NMR or other technology.

Description:
Contract Research Organization CRO needed with expertise and capability to asses tissue oxygenation in kidney (eventually also in cardiac tissue) via technology such as BOLD MRI

Description:
Europe analytical chemistry labroatory needed for qualitative analysis of the organics in the vapor phase above an alcoholic liquid. I believe GC-MS could be useful as a first pass.

Description:
Asia Laboratory needed for food nutritional testing To test for Nutritional Fact for packed food marketing in Malaysia to provide nutritional facts / microbiology test for the following 1) Ikan bilis sambal 2) Dried Shrimp Sambal 3) Mango Achar 4) Lime Achar

Description:
India or Asia US FDA cGMP pharmaceutical analytical chemistry laboratory needed viscosity testing of Pharmaceutical Drug Product (Suspension)

Description:
Pharmaceutical laboratory needed for consistency testing by penetrometry as per PhEur 2.9.9, the test material is topical ointment. The assay needs to be modified slightly in that the ointment must be gently taken from cut open tube and carefully transferred into the test cup to minimize shear to the ointment which changes the results.

Description:
Pharma needs pharmaceutical laboratory for USP Testing: Assay Test for Sorbitol

Description:
Microbiology Laboratory needed for Preservative efficacy testing of a cosmetics hair product

Description:
Montreal Food Laboratory needed for nutritional testing to support nutritional value labels for a drink

Description:
Toronto, Ontario Microbiology Laboratory needed for microbiology testing of couple different sources of raw meat for Campylobacter.

Description:
Pharmaceutical company needs Bioanalytical laboratory for urinalysis for C-telopeptide of type ll collagen or CTX-ll. Approximately 100 samples to be analyzed.

Description:
Manufacturer of chemicals used in the oil & gas field needs Middle East chemical certification laboratory for the TDS & MSDS for each product. Kindly, provide what is the cost & what is the way to start it?

Description:
Looking for bioanalytical lab to implement new haematology protocol to test for mitochondrial dysfunction. Tests for an ATP profile. We have full details of the protocol..

Description:
Biotechnology Laboratory neded for Surface charge analysis of an intact virus like particle and comparison to the live virus (MMV). Particles must be intact when analyzing. Suggested methods include capillary gel isoelectric focusing, chromatofocusing, zeta potential, etc.I can provide samples of both.

Description:
Analytical chemistry laboratory needed for aluminum analysis in Liquid cosmetics like deodorant.

Description:
Contract Lab needed to Test for content of linoleic (omega 6) fatty acid in a sample of sunflower oil

Description:
European Union consumer products laboratory needed for Tests in order to support the claim 'Dermatologically tested' for cosmetic products sold within the EU.The products are face masks.

Description:
University Researcher needs India materials laboratory for NiTi thin films of thickness 300 nm on silicon wafer size 1 cm x 1 cm. I need to characterize these samples using TEM. Please send the quotation.

Description:
Gology Laboratory needed for core analysis: mineral test s of core samples for the presence of rare earths such as iridium

Description:
Food analytical chemistry laboratory needed for shelf life stability testing for my vegan products. I have 4 different products. One is a cashew nut vegan cheese spread, another one is a frozen vegan peanut butter fudge truffle, a flourless chocolate mint vegan cookie, and my coconut almond truffles.

Description:
South Africa Physical Chemistry Laboratory needed for Particle Size Distribution (PSD) testing of screened material for Performance Testing a vibrating screen. The material is Iron Ore sinter from the Arcelor Mittal VDB works. Maximum Material size:- -30mm Sinter, Minimum Material size:- Dust. A percentage per particle report would be required. We would like to know what it would cost per samp ...

Description:
Certification laboratory needed to provide a quote for the UL certification for our Boiler (i:e Hot Water Generator) (Oil cum Biogas fired)

Description:
Australia Laboratory needed for orange oil content(%) test in orange oil-water emulsion and in oranges in Melbourne? Please provide me with a quotation and qty of samples required and rough timing.

Description:
USA FDA GMP Microbiology and Analytical Chemistry Laboratory needed for dietary supplement gmp testing. HPLC testing: caffeine, taurine, vitamin b6, vitamin b3, vitamin b12, malic acid Micro testing: total plate count, yeast and molds, e. coli In addition to competitive pricing, we are looking for good turn around times, and excellent communication.

Description:
New York analytical chemistry laboratory needed for dietary supplement formulation of dietary supplement powders including filling into prototype capsules. THe laboratory needs to allow me to be able to come into the lab to watch the process.

Description:
LEGAL: USA (Texas preferred) laboratory needed for safety google testing with ability for expert witness

Description:
EPA Environmental Laboratory needed EPA Trace Fluoride analysis of wastewater using EPA 300.0 and having problems with low spike recovery. Looks like problem with organic acid interference?? Need a lab that can handle this problem

Description:
Materials laboratory needed for OECD biodegradability testing of aluminum complex greases to OECD 201-204, OECD 107 or 117, and OECD 301B. Please include pricing.

Description:
Electrical Laboratory needed for electrical shock testing services to determine whether a magnetic-coil (custom built) can withstand extremely, high-voltages and current (power); over a very-short period of time(extremely short bursts). The coil would be delivered and housed inside of a box (enclosure). It would remain enclosed inside the box throughout the testing. The coil would be fed usin ...

Description:
UK MHRA Bioanalytical laboratory needed for verification testing for justification of the use of 263 hamster adapted strain of scrapie agent for viral inactivation testing of bovine collagen hemostatic medical device in 2014 rather than the 301V mouse strain of BSE agent believed to be more predictive. They want us to justify the use of 263k and why it is still adequate. We are looking for an ex ...

Description:
Europe Pharmaceutical analytical chemistry laboratory needed for oxygen testing in vials and how perform the oxygen test. Thanks a lot

Description:
UK Bioanalytical Laboratory needed for tissue culture analysis using either the JEG-3, JAR or BeWo cell lines. The experiments will involve treating with the required ligand and the tools that we have developed. The required treatment time of these experiments would be 1 hour. We would then require Western blot analysis, probing a range of different markers. I have previously used and tested th ...

Description:
United Arab Emirates Materials Laboratoryneeded for ASTM Testing: ASTM G180 test for Corrosion inhibiting admixtures for steel in concrete by polarization resistance in cementitious slurries.

Description:
India contract lab needed for Nematode assay

Description:
Materials laboratory needed for tape certification testing to a specific military requirement. A-A-59341, COMMERCIAL ITEM DESCRIPTION: TAPE, TWO SIDE PRESSURE SENSITIVE ADHESIVE, FLEXIBLE FOAM BASE (FOR USE WITH EXPLOSIVES) (29-SEP-1998) [SUPERSEDING MIL-T-60394A]., This CID covers the general requirements for a double coated flexible foam pressure sensitive adhesive tape in roll form wound on a ...

Description:
Food nutritional laboratory needed for beverage testing: for all nutritional testing as well as alcohol content.

Description:
USA Pharmaceutical Lab needed for analysis of our sample for Raman Spectroscopy. Please share the Quote and sample quantity for further proceeding

Description:
Chicago / Detroit analytical chemistry laboratory needed for sulfite testin in liquid spray product before and after the product is sprayed. Please provide pricing as well as terms.

Description:
Food Supplment Importer needs NY, NJ or Connecticut Tristate USA Lab needed for confirmation testing of the ingredients in two lines of herbal supplements .

Description:
Pakistan Laboratory needed for SPF testing of sun care products AS /NZ standard

Description:
Bioanalytical laboratory needed for bioavailability testing for Stability testing on transdermal vitamin B12 patch for 3 year shelf-life

Description:
USA mechanical laboratory needed for SAE Testing to test 10 air break tubes and 4 gladhands to see if they meet SAE Standards.SAE Standards: J844 (air break coils) and J318 (gladhands)

Description:
Australia Registered and Accredited Microbiology Lab needed for Honey Total Antibacterial Activity. The activity is measured using Staphylococcus aureus and expressed as the equivalent % phenol.

Description:
POLYMER LABORATORY NEEDED FOR SAE AND ASTM TESTING OF RUBBER MATS TO SAE J1400, Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies and ASTM2611

Description:
Bioanalytical Immunology Laboratory needed Basophil Activation testing for peanut allergens. Please contact me regarding testing possibilities at your lab facility. Thanks!

Description:
Environmental microbiology laboratory needed for EPA microbiology testing for regulatory vs. C.diff. Quote and time line needed ASAP

Description:
India laboratory facility needed for nutritional testing for 8 different millets.

Description:
Laboratory needed for product analysis of a tequila product

Description:
Analytical Chemistry Laboratory needed for Deformulation of a product needed within the cosmetic/aesthetic industry. Product is a combination of vitamins, within a small vial to be administered via injection. U.S. based or foreign laboratories welcomed.

Description:
Environmental Laboratory needed for pesticide testing for pesticides on membrane filters - diuron & proquinazid

Description:
US Analytical Chemistry Laboratory needed to test a defoaming agent is in accordance with 21 C.F.R. § 173.340, SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION

Description:
Laboratory needed for Stability testing on transdermal vitamin B12 patch to confirm bioavailability of ingredients for 3 year shelf life.

Description:
Start up company speciliazling in superfood supplements needs food product safety laboratory for launch of a superfood capsules that is a combination of Moringa Lef powder, Wheatgrass powder, Spirulina and Mulberry leaf powder.

Description:
Chenni Analytical Laboratory needed for Testing of fuel

Description:
Canada Contract Research Organizations CRO microbiology laboratory needed for MIC of antimicrobial testing

Description:
Veterinary Medicine Laboratory needed for kidney norepinephrine testing in swine

Description:
Asia textiles laboratory needed for Fabric Testing required for anti radar on fabric used for camouflage nets as per MIL/BS standards.

Description:
Food microbiology laboratory needed for Microbiology Testing of Alicyclobacillus and Thermo Acidophilic Bacteria (TAB) in Orange juice

Description:
Bioanalytical Test laboratory with established test method(s) to evaluate complement pathway activity, with emphasis on the lectin pathway

Description:
Bioanalytical laboratory needed that can test monoclonal antibody test article for interaction with : Fc gamma receptors (CD34, CD32, CD16) neonatal Fc receptor (FcRn). Must have VALIDATED test method.

Description:
Geology laboratory needed for quartz testing of projectile point (arrowhead) of a rare type that was supposedly found on Long Island, New York. It is made of quartz. Is there a lab that can tell if the quartz is consistent with that found in the Long Island/New England area as opposed to quartz from the Virginia/Carolina region? This type of point is more commonly found in the Virginia/Carolina ...

Description:
Medical Device Laboratory needed for Bioavailability and Stability testing on transdermal vitamin B12 patch. We have a list of protocols to follow for this test, but essentially need to confirm bioavailability of ingredients for 3 year shelf life.

Description:
Lubricant Manufacturer needs reputable European Union Toxicology Test Laboratory for toxicity tests on our lubricant formulations includingAcute Toxicity -- dermal and inhalation. We have already identified a lab in the U.S. to testing for us in the U.S.

Description:
Contract lab needed for performing a lab test for determining the porosity of concrete.

Description:
Pharmaceutical Testing laboratory center needed who can conduct an assay of sorbitol based on USP as reference. can you give us a quote ? . Thanks!

Description:
Canada bioanalytical laboratory needed for Capillary Zone Electrophoresis for determining purity of stable isotope labeled synthetic peptides. 5000 peptides total.

Description:
Vancouver Laboratory needed for Caricum testing from tumeric root

Description:
United States microbiology laboratory needed for disinfectant testings pecifically for wipes: EPA Pre-saturated Towelette test. We will appreciate if you can provide more information related to this quote and also the price quote.

Description:
United States consumer product safety laboratory needed for consumer product safety testing document or safety assessment for amazon.com for a marketed medical food product

Description:
USA biomedical laboratory needed measure the volume displacement over time of a self inflating device. Need a high level of accuracy because of the small size of the device

Description:
USA biomedical product safety laboratory needed for Medical Device Directive Bio-compatibility and Microbiological Safety testing performed on our Temporary Crown and Bridge Material for compliance to Medical Device Directive 93/42/EEC EN ISO 10093-1 EN ISO 11737-1:2006

Description:
California laboratory needed for testing tattoo aftercare ointment for a Safety Data Sheet.

Description:
United States pharmaceutical laboratory needed to have high purity acetone tested to the USP and BP Compendia.

Description:
Mechanical Laboratory needed for Testing of automotive brake lines to FMVSS 106, primarily whip testing.

Description:
Pharmaceutical laboratory needed to test our polymeric film for compliance to USP VI requirement

Description:
Cosmetics Laboratory needed for lab tests for a natural mud mask in order to have a full detail about all its chemical components, shelf life and safety.

Description:
Biomedical laboratory needed for measurement of drug elution rate from coronary stents

Description:
India materials laboratory needed for aluminum foil testing: Water Vapour Transmission Rate Testing for Aluminium Foil (20-25 microns).

Description:
US Pharmaceutical laboratory needed for injectable drug testing to test fibres / particles in vial for an injectable dosge form

Description:
Materials Laboratory needed for ASTM LEAP test as per ASTM standard ASTM D6499-12 (Inhibition ELISA.) to certify the product is latex free.

Description:
Physical Laboratory needed for Garment Flammability testing

Description:
Oil Laboratory needed for Sequence VIB motor oil testing Sequence VIII

Description:
USA Pharmaceutical Laboratory needed for Simethicone assay in raw material By FTIR

Description:
Cosmetics laboratory needs laboratory for Halal certification testing for 14 of different nail polishes so they can be sold in the Middle East. Do you have a method/protocol for such Halal oxygen permeability testing or could you develop one? In any event, we're interested in the cost for such testing and how long it'll take.

Description:
Manufacturer a counter top material with recycled window glass and an epoxy resin binder needs physical laboratory for NSF / ANSI / ASTM Physical Properties Testing Food Safety:NSF/ANSI 51 compressive strength, tested to ASTM C39 Absorption, tested to ASTM c-97-02 Sctratch Resistance/Mohs Hardness Modulus of Rupture, tested to ASTM c-99 Radon Emissions, compared to EPA-402-r-92-004 PH Misc ...

Description:
LONG-TERM TESTING Laboratory needed for ASTM Fuel stability analysis (s-value) using ASTM D7157. Testing of visbreaker bottoms. Estimate two samples per month.

Description:
Geology testing lab needed to provide testing and certification in US of mineral that we are currently working on ? GLAUCONITE, or Greensand.

Description:
Preclinical laboratory needed for study to determine if antiviral product induces f immune response in cell culture. Would like to test for cytokine expression in cell culture

Description:
Asia certified laboratory needed for certification testing of pure natural ingredients. hair and skin care product.

Description:
Physical laboratory needed for materials testing : 1 Min reflective index wavelength range 250 to 400 nm 60% 2 NIR reflectance ISC 220 ISO 7724 Wavelength - 680 nm ?10% 3 NIR reflectance ISC 278 ISO 7724 Wavelength - 680 nm ?14% 4 NIR reflectance ISC 220 ISO 7724 750 nm to 1200 nm ( 45 +/- 10)% 5 NIR reflectance ISC 278 ISO 7724 750 nm to 1200 nm ( 45 +/- 10)% 6 NIR reflectance ISC 386 ISO ...

Description:
Europe virology laboratory needed for Orf virüs detection in verdi sanples

Description:
Cosmetics analytical chemistry laboratory needed for formulation testing Hair tint in powder form for spot coloring.

Description:
Biomedical laboratory needed for shunt testing. Constant flow testing

Description:
Company in beginning stages of trademarked product needs microbiology laboratory for stability and microbiology testing to determine shelf-life

Description:
USA Laboratory needed to test cacao, more specifically, we are looking to test organic cacao products for CCN 51 contamination. Thanks so much!

Description:
US labs needed that test sulfur and nitrogen levels in crude oil by combustion/chemiluminesence at levels < 100 ppb.

Description:
Southeast preferred United States laboratory needed for ASTM Lead Equivalency and Attenuation testing per ASTM F2547-06 standard lead free material tested for Pb equivalency and attenuation at 60kvp, 80 kvp, 90kvp, and 100kvp

Description:
India NABL accredited laboratory needed for partial discharge testing

Description:
California laboratory needed for tests to determine caffeine content in cold brew coffee concentrate

Description:
Vancouver laboratory needed toTest turmeric paste for caricumins and other oils found in the product

Description:
Environmental Laboratory needed for OECD biodegradability testing of water insoluble chemicals. (used in the oilfield industrythat require biodegradability analysis (OECD 301B: CO2 Evolution Test or other similar method). I would like to request a quotation for such testing Please contact me at your earliest convenience. I look forward to hearing from you.

Description:
United Arab Emirates Materials Laboratory needed to test our plastic product Polypropylene granules for the following Composition *Appearance *Density *Melting point/Range *Melt Flow Rate *Ignition Temperature *Hazardous Status *Solubility *Molecular weight distribution

Description:
Materials Laboratory needed for certification testing of PIR Rigid cold insulation, PIR (Polyisocynurate) foam segments are high-quality insulating materials with excellent properties and are supplied in pipe sections and slabs. Other types available on request. Standard densities are 50 (PIR), other densities are also available. PIR are used extensively on equipment and piping operating at l ...

Description:
New Jersey food laboratory needed for Heat penetration test for food products in my manufacturing facility. Testing the time needed to cook in a steam oven the condiments that i make in order to reach 195F.

Description:
Pharmaceutical Microbiology laboratory needed for sterility testing of pharma samples. kindly send quotes

Description:
LONG-TERM TESTING Ireland bioanalytical contract laboratory needed for test method transfer validation and lot release viral testing on an API for pharmaceutical use. The viral testing is both qPCR and infectivity assay. Validated test methods exist. The contract laboratory would conduct a test method transfer validation and then perform routine lot release testing.

Description:
USA microbiology contract lab (referably located in GA) needed that can perform Lactobacillus enumeration.

Description:
Geochemistry laboratory needed for Zirconium dioxide testing to bring product into the United States. Need to test a mixture or compound for its source material concentration in order to determine whether the source material concentration is below the 500 ppm (or 0.05 percent) threshold specified in NRC regulation, 10 C.F.R. Section 40.13, Section 40.13(a).

Description:
North Carolina metallurgical laboratory needed for a gold / silver assay

Description:
Laboratory needed for Qualitative analysis of a solvent. The solvent is THF which is recovered as a by-product of a process. GC analysis shows some unknown peaks. We would like to identify the unknown peaks using a GC-MS

Description:
Genetics Laboratory needed for Evaluation of RNA from strains of the american serpentine leafminer, Liriomyza trifolii (Diptera; Agromyzidae) to distinguish insecticide resistant strains from susceptible strains.

Description:
LONG-TERM TESTING Seeking USA Laboratory capable of processing silica samples for our company. The silica will be processed in 3 basic stages of solvent exposure (Nitric, HCL etc). Very simple process. THis can be a one time transaction, or long term as our company scales up its production.

Description:
Materials Laboratory needed for required Filter Testing (Directly from US Code of Federal Regulators, 40 CFR Part 50 Appendix L,Reference Method for the Determination of Fine Particulate Matter as PM2.5 in the Atmosphere ) 6.5 Filter thickness. 30 to 50 µm. 6.6 Maximum pressure drop (clean filter). 30 cm H2O column @ 16.67 L/min clean air flow. 6.7 Maximum moisture pickup. Not more than 10 ...

Description:
USA Laboratory needed to process mullet residual tissue composition (proteins, minerals:Ca, Fe, magnesium, phosphorus, potassium, sodium, zinc, copper, manganese, selenium, and fluoride), and ash.

Description:
Midwest USA electronics laboratory needed for investigation testing to determine the cause of intermittent connectivity or electronic scanning equipment in the field. Several units have been deployed for ~7 years and are starting to register scan failures. The failure is repeatable if the machine is not moved, but when shipped back to the lab it will not reproduce. Scanner recalibration someti ...

Description:
INDIVIDUAL Texas area clinical laboratory needed for blood testing for biomarkers of Hep C treatment drugs when combined with Prozac and other prescribed drugs after death.

Description:
Middle East Plastics company needed for plastics laboratory for PVC and PPR Pipe testing for ISO International Certification

Description:
India physical laboratory needed for dynamic light scatting (DLS) testing with DLS x-ray diffractometer

Description:
Brick manufacturer needs India analytical chemistry laboratory for chemical analysis of clay used in bricks

Description:
Accredited Singapore or India agriculture laboratory needed for fertilizer testing for Cadmium in fertilizers

Description:
Medical Device product safety laboratory needed for Amazon Healthcare product safety testing performed on a very heating pad I'm selling on Amazon. In order to be listed in the Health Care category, I need certification that safety testing has been performed by a lab. This product is literally a cotton bag filled with flax seed and scented oil - about as simple as it gets. It is made by hand i ...

Description:
India Food nutritional laboratory needed for rice testing: Glycemic Index test for Black husk rice

Description:
Ireland University Researcher needed for preclinical studies efficacy and cytotoxicity testing on Platinum(IV) drug anti-cancer agents. I am already working on identifying the effectiveness of these drugs e cytotoxicity studies on different cell lines

Description:
Acoustical laboratory needed for acoustical panel testing.

Description:
Los Angeles area materials laboratory needed for ASTM Testing of toy building kits

Description:
University Researcher needs veterinary medicine laboratory for Canine fecal cortisol EIA testing for pilot study.

Description:
COnsumer Products Safety Laboratory needed for safety assessemnt to Amazon seller requirement: product testing document OR safety assessment document. My product is made of polypropylene (PP) and touches only the contact lens case, not the lenses themselves.

Description:
Vancouver analytical chemsitry laboratory needed for omega oil testing to make sure that the ingredients are safe and free toxins

Description:
Mumbai India materials laboratory needed for quality control testing of prism from different vendors. Would like to quantify the quality of the prisms in terms of the quality in material and its reflective properties.

Description:
Cosmetics analytical chemistry laboratory needed for ingredient testing of an ointment/cream.

Description:
Midwest microbiology laboratory needed for Sterility test of Tc99 solution (6 Cu)

Description:
Materials Laboratory needed for Cone calorimetry studies

Description:
Food microbiology laboratory needed for fermented food testing. We would like to identify a laboratorythat can help us analyze our products to identify their peak LAB counts so we can have data verifying any statements concerning probiotic density, and if CFU, viability.

Description:
FDA Food laboratory needed for food packaging contact surface testing of high quality kerosene normal paraffines n-Paraffin C13, which is used for rolling aluminum foil. As it is generally known foil can be used for packaging food, for that reason we need appropriate analysis of the substance(n-Paraffin C13) and certificate. So I kindly ask you to give information on following questions .Please t ...

Description:
Turkey / Eastern Europe toxicology laboratory needed for biocompatibility testing including genotoxicity and in vitro cytotoxicity test.

Description:
Asia laboratory needed for formal quotation for mineral analysis testing of minerals from black sand

Description:
India Materials Laboratory needed for materials analysis of u-pvc,c-pvc,pvc pipe solvent cement solution.

Description:
URGENT South Africa consumer products safety labroatory needed for all safety and performance tests needed for wooden match sticks in a box to allow for import of product into different countries. Most importantly we need the following tests to please be carried out ; 1) the test for performance of a striking surface and 2) the test for damp proofness .

Description:
India analytical chemistry laboratory needed for boiler deposit chemical analysis

Description:
FDA GMP Laboratory needed for FTIR-PAS for our GMP pharmaceutical raw materials testing of three different GMP raw materials that require this test

Description:
East Coast USA microbiology laboratory needed for disinfecting device disinfectant efficacy testing. $20,000 as a subcontract for the efficacy testing during Phase I. If you are interested please let me know and I can send you the NDA to sign before I can send you the details,

Description:
Natural cosmetics company needs British Columbia Canada packaging laboratory for Pressure testing on a new skin care packaging component (bottle) to ensure product will not leak out of the bottles under pressure.

Description:
Bioanalytical laboratory needed for Cell culture and Western blotting experiments. The cell culture would require the Jeg-3, JAR or BeWo cell line. The desired experiments would involve <24 hours treatment times. The Western blotting would require probing for 5 different markers, for which I can give you details of concentrations and incubation times required for each antibody. If you ...

Description:
United Kingdom Bioanalytical Laboratory needed for Western Blotting and cell culture based assays

Description:
Materials laboratory needed for ASTM Testing: Solar Reflective Index(SRI) - ASTM E 1980,ASTM C 1549, THERMAL EMITTANCE -ASTM C 1371

Description:
India analytical chemistry laboratory needed for natural beauty product testing

Description:
FDA cGMP Laboratory needed to Develop and validate stability indicating methods for cough/cold active ingredients in a liquid dosage form. Only interested in proposals from labs that have a record of successfully developing stability indicating methods for all or some of the following active ingredients: dextromethorphan, phenylephrine, doxylamine, diphenhydramine, chlorpheniramine. "

Description:
Toxicology Laboratory needed for toxicology testing of agricultural fungicide: Toxicological data on the technical grade material (Animal data) 1. Acute oral toxicity 2. Acute dermal toxicity 3. Inhalation toxicity 4. Skin irritation 5. Eye irritation 6. Skin or dermal sensitization 7. Sub-acute studies 8. Teratology/reproductive studies 9. Mutagenicity studies 10. Toxicity on nervous ...

Description:
Germany or Europe Contract Research Organization needed for preclinical study to Test of novel immune stimulatory compounds in a mouse cancer model. Compounds are provided, mouse lab needed.

Description:
United Kingdom cosmetics analytical chemistry laboratory needed for deformulation of skincare face cream

Description:
Bioanalytical laboratory needed for biomarker screening of 4 pine bark extract (powder) samples to be tested for anti-inflammatory ability: several biomarkers can be screened; tnf-alpha, il-1, IkBalpha are first choice. We would prefer an immunoblot test (SDS-PAGE) to be performed over ELISA, where the nitrocellulose membrane would clearly show different quantities of proteins screened through ch ...

Description:
Skincare company needs Cosmetics analytical chemistry laboratory for reverse engineering of healing/moisturizing cream

Description:
Illinois food laboratory needed for sushi rice inspection testing for health department

Description:
Microbiology laboratory needed for preservative testing, microbiology testing, and toxicity testing for essential oil samples

Description:
East Coast USA clinical nutritional Laboratory needed for nutritional analysis for nutritional label testing to test breast milk samples for authenticity as well as appropriate nutritional content.