Laboratory Test Requests

Description:
USA ISO Food Laboratory needed to test Saffron Spice for ISO standard ISO/TS 3632-2:2003

Description:
India NIOSH industrial hygiene laboratory needed for occupational health testing 1, Benzene (Method: NIOSH 1501) 2, Perchloro Ethylene (Method: NIOSH 1003) 3, Ammonia (Method: NIOSH S347) 4, Naphthalene (Method: NIOSH 1501)

Description:
USA FDa analytical chemistry laboratory needed for Azacitidine Testing: Azacitidine for injection (100mg/vial) PSD & Morphology analysis of reconstiuted suspension with 4 ml of water as "Guidance" given on the product by USFDA.

Description:
India Environmental laboratory needed for OECD BIO-DEGRADABILITY testing as per OECD guidelines.

Description:
USDA California analytical chemistry laboratory needed for Diet Coffee herbal supplement testing. Product sold in a tea bag.

Description:
Analytical Chemistry Laboratory needed for deformulation of vitamin formulation

Description:
United States TTB Certified Laboratory needed for Vodka Testing: GC for higher alcohols (Acetaldehyde, Ethyl Acetate, Methanol, n-Propanol, Isobutanol, 1-Butanol, Ac+isoAmyl) Testing to be preformed on Vodka samples.

Description:
Canada or US materials laboratory needed for Ozone Resistance testing: 100 pphm at 100 hours at 40 degrees C. Product is Luran S 778T, 3-4 samples.

Description:
Europe or Hong Kong HOKLAS accreditated Food Analytical Chemistry Laboratory needed for Formaldehyde Migration in Melamine against 284/2011 melamine mealtime set for kids

Description:
India or Asia materials laboratory needed for ASTM Testing: 1. load deflection test/ fastner pull over test of FRP panels used in cooling tower per ASTM E 72 2. Light transmission test of FRP panels per ASTM D 1494 3.flame spread classification of frp panels per ASTM E 84

Description:
India geology laboratory for mineral testing in Rock for identification of mineral percentages in the rock. Please specify the cost me for a complete analysis?

Description:
USA CPSC Accredited Consumer Products Safety Laboratory needed for Toy Testing: children's plush toy tested for safety and compliance.

Description:
LONG-TERM QC: USA FDA GMP Pharmaceutical Analytical Chemistry Laboratory needed for UP QC Raw Material Testing: Gel Strength (Bloom Value) Test following USP 37-NF32, for at least 1 Gelatin raw material sample. Also, Surface Area Test following USP 37-NF32 Chapter <846> Specific Surface Area, for 1 Magnesium Stearate raw material sample

Description:
University researcher needs genetics research laboratory for Candidate Gene Association study. We have DNA samples from buccal swabs for 500 subjects and each subject needs to be classified as having either low (2 or 3 repeat allele) or high MAO-A and also if the subject has short or long 5-HTT.

Description:
United States Materials Laboratory needed for concrete testing

Description:
Southeast USA Bioanalytical Laboratory needed for protein analysis: Differential Scanning Calorimetry of protein solution. This typically needs capillary DSC, not standard DSC for polymer/solid sample

Description:
Asia FDA GMP analytical chemistry laboratory needed for physical and chemical testing /calibration for a Sintered Porous Stainless Steel filter tube with a pore size of 0.5 microns.

Description:
India physical laboratory needed for coating testing: Solar reflective Index measurement of anti-corrosive coating

Description:
Preclinical Contract Research Organization needed for bioanalytical testing: Fatty Acid analysis for blood, serum, cells, and tissue samples from animal models (such as Mouse)

Description:
Europe bioanalytical laboratory needed for MALDI MS Testing

Description:
Mining company needs India geology laboratory for granite stone testing

Description:
Color Pigment Manufacturer needs Asia analytical chemistry laboratory for WDXRF, Wavelength Dispersive, Xray Fluorescent Analysis WDXRF services for samples our new range of pigments.

Description:
London Metallurgical laboratory needed for mineral analysis of soil samples

Description:
University Researcher needs Africa Geoogy Laboratory for coal testing: Maceral analysis - Coal biomarker(Full scan)- coal Vitrinite reflectance- Coal 5 samples

Description:
ASIA OECD ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR OECD TESTING OF WHITE MINERAL OIL Physical-chemical Testing (Including Five Batch Analysis)

Description:
Europe biophysical lab needed for biomaterials testing: conduct three Y-tests

Description:
India NABL Certiieed Laboratory needed for Failure mode analysis of lead bushes through SEM analysis and porosity estimation

Description:
MINING COMPANY NEEDS INDIA METALLURGICAL LABORATORY FOR TIN TESTING: TIN METAL AND TIN ORE. ALSO WE WANT TO ANALYSE TA2O5 AND NB2O5, WHICH FINDS IN OUR BY PRODUCTS AFTER SMELTING TIN ORE.

Description:
India FDA GMP analytical chemistry laboratory needed for deformulation / reverse engineering to estimate the PEG 300, PEG 400 and PEG 1450 in the mixture of PEGS

Description:
Consumer Product Safety Laboratory needed for Skin Allergy Testing on Silicon Rubber Ear Tips for Audio Products. Will expand more when contacted.

Description:
California Materials Laboratory needed for quote first for finding out spec of sample of Nylon 6 or Nylon 6/6 hex head bushings, especially on electrical, insulation and thermal properties.

Description:
Importer needs US Food analytical chemistry laboratory for alcohol testing analyze mezcal for it's chemical composition 43% Alcohol by volume analysis in USA -ethanol -methanol -dry parts -acid levels (pH level) -metallic concentration (copper, steel, aluminum, etc.) -alcohol by volume -water content -other particles

Description:
North Carolina Geology Laboratory. Can you test them and identify if they're the right ones and the percentages? If so, how much can it cost me for a complete analysis? Amethyst Stone, Corundum, Ruby Agate and Tourmaline.

Description:
Canada GMP Health Canada Pharmaceuticals Analytical Chemistry Laboratory needed for Propofol Testing: Globule Size by Coulter Counter determination BP Monograph - Propofol Injection. Globule size Not more than 5000 globules greater than or equal to 2 µm per mL of a 0.01% v/v dilution in a filtered 0.9% w/v solution of sodium chloride. By means of suitable equipment, pass the solution throug ...

Description:
SOUTH AFRICA BIOMEDICAL LABORATORY NEEDED FOR BLOOD SCREENING KIT TESTING; FOR RAPID ESTABLISHING THE RH (RHESUS)

Description:
NJ or NY FDA GMP Pharmaceutical Bioanalytical laboratory needed for bioanalytical testing: (1) Elisa test ( specifically for enzymes of Beta-lactamase activity (2) Protein assay (3) ID test for Beta-lactamase using SDS-PAGE

Description:
Pharmaceutical Microbiology Laboratory needed for Autoclave killing of live attenuated bacteria in active drug substance."

Description:
Asia GLP Toxicology Laboratory needed for OECD General toxicology testing: -Acute, subacute, subchronic and chronic toxicity studies - Certified with GLP-OECD

Description:
Southern California FDA Analytical Chemistry Laboratory needed for Stability testing (accelerated and regular), shelf-life testing, PAO (period-after-opening) test.

Description:
Southern California Lab in compliance with FDA and European Regulations needed for topical OTC cosmetics testing such as anti-dandruff and anti-psoriasis products. Occluded RIPT tests with Dermatologist review and signature - 24 hr safety patch - PhotoAllergy test - PhotoToxicity test

Description:
University Researcher needs Arica Toxicology Laboratory for ecotoxicology study: Effects of Endocrine Disruptors: Assessing Organismal Physiology and Reproductive Behaviour upon Exposure of Fish (Tilapia) to Endocrine Disrupting Compounds (17?-methyltestosterone).

Description:
Australia Agriculture Laboratory needed for mustard seed testing: min/max amount of sand/soil would be expected in mustard seeds.

Description:
Europe importer of Green Coffee Beans from Ethiopia needs Europe Laboratory for Quality COntrol Testing prior to import. samples tested to be sure about the quality and safety of the goods in all aspects.

Description:
India Pharmaceuticals Laboratory needed for Silicon testing on hair

Description:
India Materials lab needed for international level of Filter mask testing to provide the best quality of filter mask to Indian citizen in any case. We are having requirement for filter mask testingas per standard IS 9473 : 2002 & BS EN 149:2001 + A1 : 2009, As given below, 1. Compatibility with skin 2. flammability 3. Co2 content of inhalation air 4. Head harness 5. field of vision 6. Inhalation ...

Description:
Southeast USA commercial microbiology lab needed for MIC testig (minimum inhibitory concentration) or MBC (minimum inhibitory concentration) tests on a solution of antibiotic that we send them. They would need to have standard bacterial strains, such as S. aureus, MRSA, S. epidermis available for the MIC/MBC testing.

Description:
Texas Lab needed for tribology testing for testing of a bulk oil tank that contains Rotella 15w-30 motor oil. Sample was pulled and there is a foreign substance in the oil.

Description:
Analytical Chemistry Laboratory needed for Lactose testing of 2 lactose free powder samples, of about 100 grams, of which one is contaminated, and one is not. Organoleptic analysis done on both samples. Claimant is saying one is contaminated with a chemical smell, and therefore unable to use it for human consumption. The clean sample is pure for verification/ benchmark purposes. Please quote me f ...

Description:
USA Radiochemistry Laboratory needed for radioactivity Testing of dental materials by the dental standards ISO 13356 and ISO 6872 by gamma spectroscopy. Standards for dental ceramic restoration and implant materials. Samples are fine, processed zirconium oxide powder for producing dental restoration milling blanks.

Description:
Canada or Eastern US Safety Laboratory needed for ANSTI Personal Protective Equipment Testing of Hard hat and Visor. We're looking for testing that will meet the ANSI standards as detailed below.

Description:
San Diego analytical chemistry laboratory needed for dietary supplement testing for bioflavonoids; hesperidin, tangeretin, nobiletin, naringin, querctin, rutin. Presence and quantity

Description:
USA FDA GMP, ISO Pharmaceuticals Laboratory needed for USP monograph testing for "Foreign Substances" in Lanolin, USP

Description:
USA Food Laboratory needed for nutritional testing for nutritional value and alcohol content

Description:
Toxicology Laboratory needed for OECD Toxicology Studies on 3-10 cleaning products. OECD 430 In Vitro Skin Corrosion: Transcutaneous Electrical Resistance, OECD 431 OECD GUIDELINE FOR THE TESTING OF CHEMICALS and OECD 438 tests,Guidelines for the Testing of Chemicals . Can you give me an estimate for the cost of this tests ?We will probably need 3-10 products tested.

Description:
Large consumer products company needs India chemical laboratory for Petroleum jelly testing to determine the Percentage quantity of Paraffin wax and Microcrystalline wax.

Description:
Large consumer products corporation needs analytical chemistry laboratory for adsorbent testing to determine sorption/desorption isotherms of organic vapors (hexane, octane), gases (CO2, SO2) and water, as well as binary mixtures of the two. Interested in monolayer determination from BET theory as well as competitive adsorption data.

Description:
Large corporation needs California analytical laboratory for USP testing for glycerin.

Description:
Large Oil company neededs USA analytical chemistry laoratory for Determination of hydroxyl value by spectroscopy

Description:
Asia Laboratory needed for FDA testing of nanotechnology surgical gowns to test textiles for barrier protection against pathogen and blood. against EN13795 (CE mark) and FDA standards. We need to test for AMMI, ASTM1670/1671, EN13795 tests, and general textile tests, to prove that this material is suitable for use in the operation room as surgical gown, with sufficient barrier protection agains ...

Description:
Certification Laboratory needed for UN carton testing : test Carton under U.N. certification it must apply IATA lithium battery shipping guidelines 2014-0015 BR

Description:
New developer of water enamel nail polish working with chemist for formulation needs laboratory to have it patch tested and tested for shelf life.

Description:
FDA GMP Contract laboratory needed for foreign substances testing for modified lanolin

Description:
East Coast Microbiology Laboratory needed for microbial analysis. Full list of what we need to kill: Staphylococcus aureus Pseudomonas aeruginosa Salmonella enterica Escherichia coli Klebsiella pneumoniae Mycobacterium bovis BCG Bacillus subtilis, Clostridium sporogenes Clostridium difficile. These microorganisms are associated with claims for hospital disinfectants, sanitizers, tu ...

Description:
Canada mechanical laboratory to outsource part washing and testing for Ford program - est. annual volume is 850,000 pcs. DEBRIS ON FINISHED PARTS SHALL BE REGULARLY MONITORED AND CONTROLLED USING STATISTICAL METHODS, ACCORDING TO ESBC3P-7W092-BA -CLASSIFICATION: HYDRAULIC COMPONENTS NOTE# 10. MUST COMPLY WITH CLEANLINESS SPEC ESHL1P-7W092-AA -TABLE ...

Description:
Asia ISO NABL or ISTA Packaging Laboratory needed for Packaging, Transport and Storage Validation Testing We would like to establish the following parameters for our electrosurgical medical devices (electrodes/forceps) in accordance with ISTA Procedure 2A ? Accelerated Storage Profile ? Simulating the aging process (according to ASTM 1980-07) to establish an accelerated aging study of 12 m ...

Description:
Asia Electrical Laboratory needed for ASTM electrial testing: Insulation grade Kraft paper.

Description:
Europe FDA approved laboratory needed for feeding studies to show antioxidant propriety of the specific natural beverage.

Description:
British Columbia industrial hygiene laboratory needed for employee evaluation for olfactory capacity on yearly basis.

Description:
Analytical Chemistry Laboratory needed for API 7A1 Torque Testing for Thread Sealant

Description:
USA food analytical laboratory needed for trace analysis test for trace lead (Pb) at a detection limit of <0.02ppm. This is for CA prop 65 compliance.

Description:
Biotech company needs United States of America virology laboratory for Ebola disinfection efficacy testing of a UV surface disinfection system.

Description:
East Coast Polymer laboratory needed for ASTM Testing for Polymer Testing: Physical Properties of Poly-nitrated Oxetane such as density, viscosity, average molecular weight, molecular structure if possible, flammability, or other data needed to flesh out an MSDS safety sheet.

Description:
San Diego FDA analytical chemistry laboratory needed for FDA Compliance Testing of imported nutraceuticals. 1 imported (from Japan) Nutracuetical internal use liquid formula. Ingredients : 35 plants

Description:
USA Consumer Products Safety Laboratory needed for product safety testing of baby pacifiers and baby toys (ideally ages 4 months and up) to be tested for safety and any other tests needed to be within all necessary standards/requirements. Time frame is very flexible (sooner or later is okay)

Description:
USA FDA Food laboratory needed for ABV testing of mixed alcoholic drink

Description:
Texas food laboratory needed for Himalayan Salt testing . Manufacturers claim salt contains 88 unspecified minerals and its miracle benefits for human consumption. I'd like to have a complete mineral analysis on one Himalayan Salt stone sample, including their quantity and the level of toxicity.

Description:
Energy company needs USA analytical chemistry laboratory for detailed analysis of natural gas condensate to C30+. I am also looking for water and methanol tested to low ppm levels.

Description:
FDA Toxicology Laboratory needed for cytotoxicity Testing per ISO 10993 -5 for an Adhesive that I am using in a Medical Device that comes into contact with human skin for less than 24 hours. The contact is on average in contact with the victim for less than ten seconds.

Description:
URGENT: Materials Lab needed for ASTM testing. 1.-pH (ASTM D1287). 2.-Density (ASTM D5931). 3.-Water content (ASTM D1123). 4.-Alkaline reserve (ASTM D1121). 5.-Ash determination (ASTM D1119). 6.-Metals by ICP-OES (ASTM D6130). Preferent metals: Aluminium, iron, copper & zinc. 7.-Anions by Ion Chromatography (ASTM D5827). Preferent anions: Silicates, Chloride & Sulfates 8.-Boiling point ...

Description:
Microbiology Laboratory needed for virucidal activity testing of aerosol that is used to eliminate odors and sanitize environments in homes and hospitals. The supplier of the main component states it will eliminate pathogenic bacteria and viruses, we have already made the bacterial study of the final product but now we are needing the study of virus removal in the final product. The vendor s ...

Description:
USA USDA Food Laboratory needed for sulfite testing in processed and preserved lemon juice. Checked for total sulfite content measured in PPM

Description:
Large Automotive Manufacturer needs USA Materials Laboratory for silicone material testing: 0.625" x 1.25" Rectangle Extrusion 30-40 Duro Black Silicone (or other colors as approved) Tolerances: RMA E2 "Precision" unless stated otherwise. Operating Temperature Range -40 deg C to 180 deg C To ensure suitability for use in ATEX, IECEx, & CSA applications a Test Report showing the ...

Description:
Europe Accredited materials laboratory needed for fiber testing: -fibre determination and composition(%) -oil rate (%) -fibre linear density -number of crimp -fiber shortening rate due to crimp -fiber section shape -single fiber tensile strength (maximum strength,elongation upon maximum strength, rupture strength)

Description:
Germany materials laboratory needed for ABNT and ASTM Testing: Routine test for galvanized material according ABNT (Brazil), standards, or you can propose ASTM or ISO -DIN, equivalent standard. Product: Transformer base ( 900x900 mm,20 mm thicknes), test no.1 and 2. For test no. 3 : sample of 100 x 100 mm

Description:
North Carolina Cosmetics Laboratory needed for lipstick formulation of a new lipstick line.

Description:
United States industrial microbiology laboratory needed for microbial Identification of entero virus D 68 strain from surface samples.

Description:
Europe analytical chemistry laboratory needed for Essential oil profile analyses for 8 samples

Description:
India pharmaceutical laboratory needed with programmed controlled lyophilizer for doing some studies where we can adjust different temperature cycles for a single process.

Description:
ISLO Asia Laboratory needed for ISO fabric testing to woolworths ISO standards

Description:
Oat company needs food laboratory for Oat Milk testing for rancidity source. We have 2 sources of oil tat aybe causing the rancidity: 1/ Partially hydrogenated soy oil in form of creamer with 50% fat. 2/ Temperature stabilized Oat flour with about 12% fat. Rest of mix are TCP and Dextrose. One of this oil is rancid. Can you run some tests and determined which oil is bad?

Description:
Underground ining Company needs Phillipines Metallurgical Laboratory needed for metallurgical assaying services in the Philippines.

Description:
Southern USA analytical chemistry laboratory needed to run a screen for unknowns on a powder sample using LC/MS. Please provide pricing, we need this information ASAP.

Description:
Food Laboratory needed for beverage testing: Concentrations of caffeine and theobromide in liquid samples.

Description:
Wholesale of finished pharmaceutical products needs Europe analytical chemistry laboratory for EP finished drug product testing to European Pharmacopoeia 2.9.20 method ?Particulate Contamination: Visible Particles? that does not set criteria of acceptance; 2) The need to carry out a test to determine the content of antioxidants in parenteral solutions throughout the shelf-life. ?

Description:
Midwest Food Laboratory needed for tood testing to 21CFR 173.25 ion exchange resin for food

Description:
Europe accredited ad member of NANDO materials laboratory needed for flooring system (polyurethane), test on dynamic crack bridging ability in acc. EN 1062-7, method B, class B3.2

Description:
Africa Analytical Chemistry Laboratory needed for food testing

Description:
India Materials Laboratory needed for physical testing of IR reflecting materials for total solar reflectance. For this, we have some doughty on how to measure the reflection of a particular material / substance with that of another one in near IR range.

Description:
Brazil accredited or certified genetics laboratory needed for PCR testing of insect samples

Description:
Middle East Geological Laboratory needed for Geochemical testing for heavy minerals, isotopes, petrographic analysis.

Description:
USA Analytical Chemistry Laboratory needed for quantitative analysis of Arsenic content in aqueous surfactant formulation at ppm levels. This should be by ICP, ICAP, or similar analysis type. USP limit test type not acceptable.

Description:
USA Cosmetics Analytical Chemistry Laboratory needed for Total Nitrosamine Content analysis for personal care product (70% surfactant, 30% water). The active ingredient that would yield Nitrosamines is Dimethlycocoamine Oxide (CAS 61788-90-7), which is comprised of CAS 1643-20-5, 3332-27-2, and 7128-91-8. Prefer general procedure such as GC-TEA. Other types may acceptable; e.g., GC/MS, GC-ECD.

Description:
Food Chemistry Laboratory for FCC Cellulose Assay per current Food Chemical Codex, Powdered Cellulose monograph. Matrix is highly purified, bleached powdered cellulose

Description:
USA materials laboratory needed for Fluid compatibility testing of elastomeric gasket material against a specific grade of kerosene to Exxon Mobil Global Practice 06-05-01:?The Vendor shall either verify that the gasket and glue material are compatible with the specified fluids, including chemical cleaning fluids, or submit proof that verification was performed in the past. In either case, the ver ...

Description:
California cosmetics laboratory needed for skin serum testing to be sold on Amazon.com

Description:
Europe electrical laboratory needed for UL508 Overload and Endurance test 100k cycles - General Use - 230VAC 25AAC 0.8 Power factor

Description:
East Coast USA ASTM or ISTA certified Laboratory needed for Automotove Packaging Testing: ASTM D4169 shock and vibration as well as compression testing 1-2 packages with automotive steering gear assemblies. ASTM D4169 for shock and vibration Compression testing to validate stacking strength

Description:
Europe polymer laboratory needed for ANSI Testing of polyurethane slab stock foams for Volume resistivity&Surface resistivity according ANSI/ESD S 20.20 ANSI/ESD S 541 We need test protocol with international validity. The lab must be Accreditation. Thank you in advance. With our best regards. Simeon

Description:
Laboratory needed to assist in development of coolpack solution which are normally used in refrigeration field, and can be seen in freezers of refrigeraters.It is a water based solution. If we provide you the sample solution, is it possible to identify the contents with % involved. Please specify how much will be the testing charges, leadtime required & volume of sample required.

Description:
USA textiles laboratory needed for ASTM chemistry testing for microsilica to Astm c1240, Standard Specification for Silica Fume Used in Cementitious Mixtures ,

Description:
Food Laboratory needed for Beverage Formulation of cleanse drink

Description:
Consumer Produsts Safety Laboratory needed for ASTM children's book safety testing: Phthalates Testing- ASTMF963 and 16 CFR 1303. complies with law on phthalates. surface coating for lead will not exceed 100ppm and substates will not exceed 200ppm

Description:
USA FDA Testing Approved Lab needed for verification testing. Verify that a sample of EOS PEEK HP3 (Polyaryletherketone) complies with the requirements of FDA 21CFR177.1556. NDA required before receiving sample material.

Description:
Large Oil Company needs Oil Laboratory for FT-IR measurements. I was wondering what the costs and time schedule would be for those measurements. We are talking about epoxy and silicone samples of small dimensions ( 2 mm ) or even adjustable on location.

Description:
USA clinical diagnostic laboratory needed for urine analysis: 1 to 2 panels

Description:
Large pharma needs European bioanalytical laboratory needed for performing release testing of antibody binding assay. The lab cannot be in Germany or Holland.

Description:
Europe ISO/IEC 17025 accredited laboratory needed for ASTM and DIN Testing of Hydraulic oils (HLP and HVLP) to be tested under requirements of DIN 51562-1, DIN 51562-2 and requirements of Bosch Rexroth AG

Description:
Europe Electrical Laboratory needed for ANSI Electrical testing Require ANSI C12.20-2010 Clause:5.5.4.13 & ANSI C12.1-2008 Clause:4.7.2.13: Test No 13: Stability of Performance Product: Electricity Meter Accuracy Class 0.2 Samples: 2

Description:
China materials laboratory needed for adhesive testing: Shear strength and viscosity test needed for for solvent based adhesive

Description:
India materials laboratory needed for auto parts testing

Description:
India Oil Laboratory needed for ASTM naphtha testing: Sl No Parameters Unit 1 Specific gravity @ 150C 2 Paraffins %Wt 3 Olefins %Wt 4 Naphthenes %Wt 5 Aromatics %Wt ASTM D86 Distillation Initial Boiling Point 0C 6 ASTM D86 Distillation Final Boiling Point 0C 7 8 Molecular Weight Kg/Kgmol 9 C/H Ratio 10 LHV of Gas-Phase Naphtha KCal/Kg 11 H2O ppmw ...

Description:
Puerto Rico Environmental Laboratory needed for water Testing of well water for potable/ agricultural use.

Description:
USA cosmetics analytical chemistry laboratory needed for Lab formulation development of a topical tattoo removal cream based on list of ingredients.

Description:
US environmental laboratory needed for environmental bee study to determine the Activity of natural products to control Bee diseases. (in particular, bacterial diseases)

Description:
India Food Laboratory needed for saffron testing for ISO 3632 certification of the saffron. ISO 3632-1:2011 establishes specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers.

Description:
Europe Laboratory needed for H2S testing of raw material

Description:
USA Laboratory needed for non-destructive analysis on a small work of art (a miniature painted or enameled on glass)

Description:
East Coast USA analytical chemitry laboratory needed for Hi-Resolution Mass Spec, Phosphorus NMR, and ICP analysis of a novel Phosphorus-based FR molecule

Description:
Europe consumer products laboratory needed for Lice Shampoo efficiency Test Study

Description:
India geology laboratory needed for granite stone confirm testing by lab test need lab report.

Description:
USA FDA Food Laboratory needed for a range of food testing. The type of products are food items from popcorn, pizza to prepared dishes ranging from Mexican cuisines, etc. The number of samples will vary and as such be on a on-going basis till all the SKUs are covered.

Description:
USA FDA Food Laboratory for Glycemic index food product testing

Description:
Analytical Chemistry lab needed for Asphaltene Testing. Please specify the rate.

Description:
Europe Electronics Laboratory needed for RoHS, IEC 60950 safety test EN/55022 EN/55024 EMC test RoHS Directive 2002/95/EC ?

Description:
Marine Engineering company needs Egypt geotechnical laboratory for ASTM Testing: ASTM-BS soil and rock testing

Description:
Asia - India FDA GMP Laboratory needed for USP Testing: test for the product of Pancrelipase Delayed-Release Capsule USP, Please send testing availability and sample requirments along with quotation. Kindly send as early as possible. Enzyme Activity Testing Carboxypeptidase A Activity Carboxypeptidase A Activity Chymotrypsin Activity Elastate Activity Trypsin Activity ...

Description:
India analytical chemistry laboratory needed for USP cosmetics testing of USP/ BP Specification and Material status data of beewax.

Description:
USA Central Laboratory needed for pharmaceutical clinical trial serum testing The research involves patients with diabetic ketoacidosis. Lab tests requested are the following: - Creatinine, serum - Creatinine, urine - Cystatin C, serum Total number of samples ~ 120

Description:
USA Toy laboratory needed for puzzle testing to test a 10pc Puzzle. 8 shapes, top, and bottom.

Description:
USA ISO Preclinical Laboratory needed for preclinical testing on toothpaste. Tests for development are generally performed to: 1. Develop a toothpaste 2. Routine QC

Description:
Laboratory needed for athletic sock testing for shock absorption, compression (mmHg), and wash test. Thank you,

Description:
Materials laboratory needed to test UPVC fittings for ISO 1452-2 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure

Description:
Large Mining Company needs site assessment service for landfarming and bioremediation project to treat hydrocarbon contaminated soil/sludge from Oil water separator and hydrocarbon contaminated spill.

Description:
East Coast Biological Laboratory needed for FTIR analysis on blood particles from an insulin delivery device

Description:
India materials laboratory needed fr ASTM Testing. Test our Rigid Polyurethane Foam for the Thermal Conductivity as per ASTM- C - 177 or IS:3346, Method of the determination of thermal conductivity of thermal insulation materials

Description:
Canada Packaging Laboratory needed for CFIA food packaging migratory testing of laminated plastic film for snack food. samples available

Description:
Pharma needs GLP Contract Research Organization for Phototoxicity Clinical Trial Studies: phototoxicity for a clinical trial candidate. Candidate is a topical gel.

Description:
University Researcher needs Pharmaceutical Microbiology Laboratory for MIC testing of a series of pharmaceutical compounds on E.coli A.baumanii P.aeruginosa K.pneumoniae Human cytotoxicity

Description:
USA, Argentina, Germany, France biomedical labroatory needed for IEC Testing: Ultrasound for physiotherapy - samples - 01 und Stimulator for physiotherapy - samples - 01 und Test for Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment

Description:
Asia electrical laboratory needed fr CE, UL and RoHS testing: 1. Intelligent Timer 1030950 2. Spectrum Tube Power Supply 1130090 3. Van De Graaff Generator 1080680 4. Regulated Power Supply 2040285 5. Power supply VADC Digital 2040800 6. EHT Power Unit 5kV 2040130 7. Bench signal Generator 1100725

Description:
India / Asia Food Laboratory needed for Honey Testing .

Description:
Telecommunications firm needs Asia laboratory for ASTM Testing: Solar Reflectance Index test report for Granites.

Description:
Europe consumer products laboratory needed for ASTM product safety testing of Bunk Beds in wood particle Board Toddler Beds to ASTM F 1427-07 Bunk Beds ASTM F 1427-RED-07_06 Bunk Beds ASTM F 1821-13 Toddler Beds ASTM F 1821-13-RED Toddler Bed

Description:
Laboratory with ISO 17025 accreditation needed for vodka testing. The tests our client wants includes: Ethanol content Total acidity as acetic acid Higher alcohols as amyl alcohol Aldehydes and ketones calculated as acetaldehyde Methanol Copper ppm Also Physical characteristics included on report; free from sediments or suspended solids colorless characteristic aroma and taste of vodk ...

Description:
Nanotechnology laboratory needed for microscopy for nano-carbons in raw ore by Scanning Electron Microscope SEM

Description:
European Union FDA Registered cGMP Compliant Laboratory needed for stability Testing: shelf life study of the product under accelerated conditions, 40C/75RH for 270 business days. Analyzed the product at predetermined intervals for appearance, texture, microbes, yeast, and mold. Issue certificates of completion at 45, 90, 180 and 270 days respectfully.

Description:
Asia Mechanical Laboratory needed for Resin bond testing in diamond squaring wheel

Description:
France Preclinical Contract Research Organization needed to test the anti-cytokine profile of anti-inflammatories in vitro

Description:
Preclinical Contract Research Organization needed for Neurology Toxicology Studies: Ototoxicity and protection against ototoxic insults such as antibiotics, cytotoxic drugs, age, noise

Description:
USA or Europe analytical chemistry laboratory needed for lecithin testing to characterize components of unsaponifiable matter in Fish Lecithin. I estimate that unsap. it self is about 5-9% w/w from sample. Components are as follows: Unsaponif. Matter content 1.Fatty Alcohols Myristyl alcohol Palmityl alcohol Stearyl alcohol; Elcosyl alcohol Docosyl alcohol Mixture of long-chain polyunsa ...

Description:
India food laboratory needed for nutritional lab tests of a protein supplement nutrition

Description:
Homeowners Association needs Georgia licensed laboratory for water quality testing including coliform and e. coli testing. Sample(s) from what is believed a contaminated stream.

Description:
Asia Toy laboratory needed for toy testing

Description:
Analytical Chemistry Laboratory needed for fluoride testing on calcium citrate and calcium carbonate samples per FCC method (ion-selective electrode determination of HCl digest). Thank you. email:

Description:
Medical products manufacturer and distributor of conductive medical gels needs biomedical laboratory for establishing the testing criteria for our ultrasound conductivity gels. Will you be able to perform acoustic impedance or attenuation testing for our ultrasound gels? Z=p×V Z= acoustic impedance p = substance density V = speed(Velocity) of ultrasound Velocity (V) = Freq ...

Description:
ASIA / INDIA ENVIRONMENTAL MICROBIOLOGY LABORATORY NEEDED FOR ENVIRONMENTAL LAND MANAGEMENT PROPOSED METHODOLOGY: A. METHODOLOGY study will base on screening method to identify potential land management practices, edaphic factors and pollution on microfungal diversity. Site specificity An extensive survey will be conducted to identify sites for soil sample collection. The sites selected ...

Description:
Canada or USA materias laboratory needed for Nylon Chrystalinity testing - by DSC Nylon 1 micron thick - 10 X 10 mm. 3 samples - not laminated, laminated recipe 1, laminated recipe 2. Multiples of each sample type.

Description:
Large chemical company needs middle east anaytical chemistry aboratory for hydrocarbon testing. determine hydrocarbon/s on aluminum bands: E1019-11 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques.

Description:
India Product Safety Laboratory needed for product safety testing of 1 cosmetics and 1 soap as follows: -Dermal irritation -Oral toxicity -

Description:
Africa metallurgical laboratory needed for soil testing: lab tests and analyses.

Description:
Microbiology Laboratory needed for natural health products testing: testing pesticides and microbial testing certificate for submitting to Natural & non-prescription health products Directorate for submission of a PLA for a tooth powder product. Our ingredient is Proper name Pilocrpus microphyllus common name Jaborandi leaves powder. If you would be able to test, please send us your most competiti ...

Description:
University Researcher needs India pharmaceutical toxicology laboratory for cytotoxicity studies against cancer cell lines for 20 samples our compounds are solid in nature the following studies reqiured aginst Hela cell lines a) MTT assay b) Apoptosis studies c) Cellular uptake d) Cell cycle arest e) Tunnel assay f) Mitro candrial membrane potential studies any related cytotoxicity studies

Description:
Consumer Products Safety Laboratory needed for baby products testing to ASTM for designer who isdesigning a ring sling-style baby carrier which needs to conform to the safety standards in ASTM F2907-14b.how much will this cost?

Description:
Middle East metallurgical laboratory needed for steel leachate testing of steel slag that needs to be deposited. Before this, the slag shall be analysed according to Australian Standard "AS 4439.3 - 1997: Wastes, Sediments and Contaminated Soils - Preparation of Leachates, Bottle Leachating Procedure". The Leachate shall be analysed for among others heavy metals (e.g. Cr total)

Description:
USA Product Safety Toxicology Laboratory needed for Toy Testing: toxicological assessment (TRA) for Plastic toy to be sold in USA. the plastic is "well known" in the professional literature as non-toxic and safety.

Description:
Africa ISO metallurgical laboratory needed for mineral analysis

Description:
Asia polymer laboratory needed for reverse engineering of polymer material for material identification and reproduction

Description:
India Materials Laboratory needed for ISO Surface cleanliness to ISO 8296-2003 . oil freeness test by ink test/ ARCO TEST on automotive component after cleaning and before painting

Description:
Biopharmaceutical company needs pharmaceutical Embryology Preclinical Laboratory needed for embryo implantation research study.

Description:
USA laboratory needed for FDA Physical shock testing of our iPad mount for use in transport category aircraft to FAA limits stated in 14 CFR 25.561

Description:
UK, Europe USA ISO bioanalytical laboratory needed for Urine analysis of SPMA bio marker for benzene exposure, expressed as ratio to measured creatinine level Urine analysis for mercury Urine analysis isocyanates

Description:
URGENT Environmental Safety Laboratory needed for Combustible Dust Safety testing on catalyst. Conbustion testing, Environmental Kst on combustible dust sample, raw catalyst 1 sample

Description:
Russia analtycial chemistry laboratory needed for sunflower seed oil testing for wax content & oleic acid in Sunflower seed Oil 1 Composite Sample

Description:
Asia Skin products manufacturer needs laboratory to test products before sending to the US. :

Description:
USA EPA Toxicology Laboratory needed for agriculture toxicology study: test material is Molybdenum chelated with citric acid. Or Molybdenum Citrate. Ideally toxicity LD50 needed or some other test that would allow agricultural use. Also, chemical purity analysis is needed and spectrometry to depict a 3D formula.

Description:
Dental Pharmaceutical company needs Consumer Products Laboratory for clinical study: dental consumer products panel testing with 100 patients. Company in process of obtaining an ADA seal of approval for their oral mouth rinse for the purpose of managing oral malodor. In order to prepare the ADA package, I am seeking to engage someone to conduct a three-week crossover or parallel group design clini ...

Description:
Manufacturer needs Canada or USA pharmaceutical laboratory for skin ointment testing for the presence of steroids or hormones.

Description:
Aerospace Laboratory needed for Hydrogen Content Testing Hydrogen pickup on titanium tubes after etching in hydrofloric acid to Lockheed spec. mp50063 rev. b method 1a.

Description:
Small craft brewery needed for Production Efficiency Testing : alcohol content testing of low-alcohol beer kill the yeast in a low fermented product. for 'sweet spot' between production efficiency and safety of the product. The typical guidelines for pasteurization require to apply heat for over 15 minutes, which is not easy to do in a small brewery. Therefore, I wonder what other options might b ...

Description:
USA FDA GMP Analytical Laboratory neeed for Charged Aerosol Detection HPLC-CAD analysis

Description:
Researcher at Research Center needs India agriculture laboratory for feed analysis sample for (estrogen , progesterone, and zeranol)

Description:
Biomedical Laboratory needed to measure the concentration of oxygen released from a biomaterial over time

Description:
Biomedical Laboratory needed for small-capacity Izod impact test.

Description:
Analytical Chemistry Laboratory needed for Deformulation analysis of natural beauty product

Description:
Materials Laboratory needed for ASTM or JIS Testing of light blocking capability of curtain . Lab test results according to JIS L 1055 Standard Testing methods for light blocking effect of curtain materials.

Description:
Polymer Laboratory needed ASTM plastics testing: ASTM D7573 (Total Organic Content) We have Plastic Tubing that requires the following test: ASTM D7573 ? Total Carbon & Organic Carbon in water by High Temperature Catalytic Combustion & infrared Detection Deionized water or ASTM Type II Water Hose Leachable material preparation: A 12 inch min section of tubing should be filled with de ...

Description:
Educational institution needs Middle East Food Laboratory for food analysis : macronutrient analysis, but we might also have to evaluate the micronutrient contents in the same cultural food including analysis for : 1. Moisture content 2. Ash content 3. Crude protein 4. Crude fat 5. Crude fiber 6. Carbohydrate (calculation by difference) 7. Saturated and unsaturated fat 8. Glycemic index Please se ...

Description:
Product Safety GLP Laboratory needed for OECD eye irritation potential of four products with study design in accordance with the OECD TG 405, EU Guideline B.5 and conforming to the OECD Principles of GLP. Therefore we would like to ask if you could provide us a cost estimate, time-line, invoicing procedure, details of sample delivery and a relevant test protocol for In Vivo Eye Irritation GLP test ...

Description:
Europe or North America Electrical Certification Testing of Personal Protection Equipment PPE to IEC 60895 testing for cunductive garments up to 800 kv

Description:
Long-Term: Essential oil manufacturer needs HPLC and GCMS water testing and quality control testing of herb powders from two companies for purity and identity. Also need to periodically test water quality of commercially purchased distilled water and our own well water."

Description:
Manufacturer of Male Enhancement product needs testing for Sildenafil.

Description:
URGENT: USA TTB Laboratory needed for wine testing: alcohol and carb content test for wine. I only have 10 days to submit the result.

Description:
Pakistan chemical test lab needed for petrochemical testing

Description:
Manufacturer of medical gels needs biomedical laboratory for acoustic impedence and transmission coefficient testing.

Description:
India Analytical Chemistry Laboratory needed fr Nutraceutical cosmetic ingredient testing

Description:
URGENT: Consultant needs Microbiology Laboratory for Endotoxin testing asap

Description:
Analytical Chemistry Laboratory needed wit Head space Gas Chromatography capabilities. Please specify how much per sample and turn around time.

Description:
Materials Laboratory needed for nylon wristband testing of compressionn band

Description:
USA Performance Laboratory needed for comparative testing of crushed glass filter media to be used in pool sand filters. The testing requirements are listed in NSF/ANSI Standard 50. I am also looking to determine the filtration capacity down to what micron level.

Description:
USA Materials laboratory needed for plastics testing: RoHS quote on plastic components. 3 assemblies Tests seeking: 1.Lead (Pb) 2.Mercury (Hg) 3.Cadmium (Cd) 4.Hexavalent chromium (Cr6+) 5.Polybrominated biphenyls (PBB) 6.Polybrominated diphenyl ether (PBDE) A. assembly has 4 plastic components B. assembly has 2 plastic components, and 1 brass component C. assembly has 4 plastic com ...

Description:
Midwest Food Laboratory needed for baked goods testing for percent of alcohol remaining in specilty baked goods, looking for amount of alcohol by volume/ percent alcohol. As many samples as needed will be provided

Description:
Large chemical supplier needs FDA GMP analytical chemistry laboratory for GMP excipient testing: Related Substances testing per the Chinese Pharmacopoeia monograph for monohydrate lactose

Description:
USA FDA Consumer Products Safety Laboratory needed for FDA Testing of handle Coffee mug/ mug is black with graduated chrome sprayed bottom

Description:
Molecular Diagnostic Company seeks BSL4 Laboratory services to develop BSL4 Ebola infectivity assays.

Description:
India NABL environmental laboratories needed for soil science testing

Description:
Textiles Laboratory needed for ANSI standard testing for Hi Vis hunting shirt fabrics in Blaze orange

Description:
USA anaytical chemistry laboratory needed for sulfate tests on approximately 20 samples of Tricalcium phosphate and dicalcium phosphate. We are expecting around 500 ppm

Description:
USDA USA Food lab needed for USDA finely textured pork testing (recovered from advanced meat recovery systems) for the presence of spinal cord or Glial Fibrillary Acidic Protein / Central Nervous system tissue to USDA Standards.

Description:
East Coast USA needed for ASTM biofuel testing on a biofuel (non-ester renewable diesel/fuel oil) product. See testing requirements The specific tests we need are:Moisture and Volatile Matter (AOCS ca 2d-25)Ash Content (ASTM D482)Sulfur by ICP-OES (ASTM D5185)

Description:
Physical Laboratory needed for modulus test done on couple of rubber belting samples using ISO-9856, Conveyor belts -- Determination of elastic and permanent elongation and calculation of elastic modulus:

Description:
FLorida lab need for human breast milk testing for caloric content

Description:
Pharmaceutical Laboratory needed for contract synthesis: Synthetic Chemistry of pharmaceuticals

Description:
Toxicology lab/labs needed for the following toxicology tests: Acute Mammalian Toxicity Test Repeated Dose mammalian Toxicity test Genotoxicity Test Assess Skin Irritation Skin Sensitation test Acute fish, dalphnia or algae toxicity testing Biodegradation I would like a quote for each test and an estimated time of completion for each test as soon as possible.

Description:
China metallurgical laboratory needed for ring testing of Brass ring plated in yellow gold. Need lab tests to determine what plating have been done on the ring and thickness.

Description:
USA analytical chemistry laboratory needed for Zn analysis by ICP-MS or Flame AAS. Zn analysis for batch of 20 samples at a time

Description:
Ophthalmic distributor needs ophthalmic product testing

Description:
Textiles Laboratory needed for fabric testing done for a basic tee shirt program. Would like to see how much the rates are for testing and typical leadtimes for having testing done. Would appreciate if you could let me know information needed in order to get a quote.

Description:
USA analytical chemistry laboratory needed for Phosphate testing: perform Iron analysis by AA on 6 samples of TCP (Tricalcium Phosphate).

Description:
Medical Device Manufacturer needed for accelerated aging and post accelerated aging tests medical orthopedic implant. The specifications are Medical package (ISO 11670) -Accelerated ageing ASTM F1980 Visual test ASTM F1886 -Seal Strength /peel test ASTM F88 -Dye penetration (package integrity) ASTM F1929 - microbial barrier ASTM F2638 email: phonenumber: address:

Description:
Pharmaceutical microbiology laboratory needed for EP Sterility Testing (microbiology) for our sterile product (parenteral liquid 100mL in bottles). to EP 8.0. Could you quote the price for me? The followings should be included in the quotation: 1) The price (a batch) 2) Turn round time 3) Test method 4) Regulaed under MHRA , email:

Description:
Dental manufacturing company needs preclinical contract research organization for medical device product safety studies including oxicology and biocompatibility studies on medical device of macroporous hydroxyapatite powder (calcium phosphate) used in dentistry, maxillofacial surgery, orthopedics and traumatology in order to replace or substitute the bone tissue. In order to check its biocompatibi ...

Description:
UK Biochemistry laboratory needed for Karl Fisher Testing % moisture 40 vials of Freeze Dried biotechnology product (~0.1g mass / vial)

Description:
USA FDA Bioanalytical Laboratory needed for monoclonal antibody testing: ELISA test for potency of a monoclonal antibody re-packaged into a syringe.

Description:
UK Bioanalytical Laboratory needed for testing assay of hgh somatropin 191 amino acid chain to EP / USP / CP / WHO standards. Standard test sample of somatropin for accurate manufacture of 191 amino acid chain.

Description:
India Pharmaceutical Laboratory needed for USP Analytical methods validation for Heparin Sodium Injection USP Product: Heparin Sodium Injection USP Test : Method validation required as per ICH guideline for Assay parameter

Description:
Asia Food Laboratory needed for AOAC methodology food testing to quantify several meals of my private business against the following: Carbohydrates Dietary Cholesterol MSG Protein Sodium Sugar

Description:
Asia Biomedical Laboratory needed for Accelerated aging testing for medical implants to ASTM F1980,Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

Description:
USA East Coast Pharmaceutical Laboratory needed for USP / NF Monograph Excipient Testing of hydroxypropylmethyl cellulose (Hypromellose) per USP and NF monographs. The HPMC samples will be 3cps, 5cps, 6cps (most common), 15cps and 50cps. The assays I would like to inquire about are listed here: Capillary viscometer method (per USP general chapter 911) % Hydroxypropoxy content (Listed in ...

Description:
Northeastern US Alcohol and Tobacco Tax and Trade Bureau TTB / FDA food laboratory needed for beer testing: accurate percentage alcohol reading for our beer -- for state registration purposes.

Description:
Analytical Chemistry Laboratory needed for formulation testing and development of men's haircare line.

Description:
Clinical Laboratory needed for clinical study of sports bra for BACK and BUST support. In additon, because the bottom portion of the Lean Body Sports Bra is neoprene (a non breathable material), it will make the body sweat therefore enhance weight loss. I would love to know the process of having the weight loss proven. I know it's a bit more difficult.

Description:
Midwest USA FDA or ISO Food Laboratory needed for ingredient Testing: Active ingredient in Barbecue sauce

Description:
Analytical chemistry lab which can perform the Karl Fischer test on a sample of Cyclohexanone.

Description:
California Mining Laboratory needed for gold mine lab test services at gold site. Your actual test sample can be dry process or save green process. It doesn't need to be chemical involve except assay test and report. Sample test can be regular dirt, sand, silt. It doesn't have big rock. Please contact us for more information.

Description:
South Africa mining laboratory needed for chemical analysis of Tantalite ore- Legally produced

Description:
University Researcher needs Ireland electronics laoratory for cell phone safety and toxcity testing is needed:x-ray fluorescence spectroscopy safety equipment is needed because its flammable and toxic

Description:
USA or Canada Consumer Safety Laboratory needed for Consumer Panel Testing of OTC formulation sunscreen supplement. We need to have volunteers take the formula and test if they are susceptible to sunburn afterward. This test is to validate that chemokine CXCL5 levels are less after taking our formula than the placebo post-UV- exposure. Possible methodology; PCR to analyze changes in ...

Description:
Washington DC Laboratory needed for beer alcohol content testing: Test variety of draught beers served by an establishment to compare the alcohol content in the beer served there versus the alcohol content of the same brands of store bought, bottled beer (and advertised alcohol content percentage).

Description:
Microbiology Laboratory needed for disinfectant Efficacy testing for a number of disinfectants. Virucidal Suspension testing against common poultry, cattle and swine viruses.

Description:
Saudi Arabia metallurgy laboratory needed for Gold coin testing for precious metals

Description:
Biochemistry laboratory needed for Chlorophyll Extraction to get photovoltaic active chlorophyll using spinach to extract active chlorophyll. We would like the procedure to be cost effective and fast (eg, cold pressed and then solvent extraction with acetone and hexane). We also need a test procedure to prove that it is active preferably with a spectrograph.

Description:
Midwest laboratory needed for ASTM natural gas testing for electricity generation Once per year we collect natural gas samples in small cylinders provided by a lab. The lab analyses these samples by ASTM1945,Standard Test Method for Analysis of Natural Gas by Gas Chromatography D3246, and 3588.

Description:
Large organization needs South Africa Toxicology Laboratory for toxicology testing: Toxicology report required for a sample of Jatropha oil

Description:
Costa Rica and Russia ISO 17025 Food Laboratory needed for meat testing (microbiology, genetics, chemistry) including bacon, ham, beef toppings, italian sausage and chicken products, for: Total coliforms, Escherichia coli (E. coli), Salmonella ssp., Listeria spp., Listeria monocytogenes (L. monocytogenes), Staphylococcus aureus (S. aureus), Aerobic plate count, Moisture, Protein, fat, salt. DNA ...

Description:
USA Labs needed for deformulation / reverse engineering garlic supplements.

Description:
Manufacturer of chemical products for car wash and detail needed fr formulation development of new product in addition to VOC compliance testing and biodegradability testing of surfactants

Description:
Local (Oregon-Washington) Certification Lab needed to certify upholstered furniture for passing CAL TB 133 Composite Requirements.

Description:
Analytical Chemistry Laboratory needed fr salt testing. Analysis for impurities, moisture, etc.

Description:
Middle East Region or Arab Gulf Region Laboratory needed for packaging testing og UN approved Composite Drums as per below UN certification No. UN # 6HA1/Y1.5 /100/14 IND/99539827

Description:
Engineering firm needs Electrical and mechanical Laboratory for Life cycle testing of industrial cleaning equipment

Description:
India mechanical laboratory needed for ASTM polymer Testing DMA testing: creep, fatigue etc for polymer thin film

Description:
India Product Safety Laboratory needed for in vitro testing for SPF values on topical products. Need UVA/UVB ratios.

Description:
Bioanalytical Laboratory needed for liposome testing including particle size analysis and uniformity. Nutraceutical product tested and are not entirely sure what types of tests are available for this and price. What we have found thus far is testing for particle size (which we need to be in the range of 150 nanometers) and something for 'uniformity' of the liposomal particles. We two we have hear ...

Description:
Microbiology Laboratory needed for microbial efficacy study of UVC-system and hand cleaning solution

Description:
Midwest USA food laboratory needed for Food chemical codex testing protein analysis for Degree of Hydrolysis on egg white protein

Description:
Microbiology laboratory needed for bioburden testing on woundcare dressing sterilized via E-beam radiation to calibrate the radiation levels.

Description:
Small natural lipstick company needs independent third-party laboratory for lipstick ingredient testing and safety assessment as per Amazon's requirements

Description:
Biomedical Laboratory needed for therapeutic wound dressing testing including: initial biocompatibility testings for: -cytotoxicity -sensitization -irritation Intended use will be for: over the counter use -minor abrasions -lacerations -minor cuts -minor scalds and burns under supervision of a healthcare professional -MRSA wounds -diabetic ulcers -leg ulcers (venous status, arterial ulcers and le ...

Description:
flavor & fragrance company needs professional contract lab for identification testing to identify unknown materials in our flavor & fragrance products. This can be in powder or liquid matrix. Due to the dynamics of our organisation, we need results fast. An example: we find a hazyness in a liquid flavor and we want to know what it is. Or, we find black particles in a powder flavor and we would lik ...

Description:
Generic Drug Manufacturer needs India pharmaceutical laboratory for steroid testing: unknown active content of any specific steroidal item presence in a mixture of pharmaceutical drugs.

Description:
LONG-TERM TESTING Bioanalytical Laoratory needed for plant testing: Real time PCR leaf testing using PCR of plant pathogens.Testing for alphaproteobacteria "Candidatus Liberibacter solanacearum" I will be doing several batch leaf samples per month and would like to get bulk pricing if possible."

Description:
US mechanical lab needed for spring testing to help us measure the spring rate & loads on a spring at elevated temperatures. We would need the lab to measure the loads of the spring in temperatures of 500 deg C. If this is possible, please contact me and I can forward you a copy of the print.

Description:
Law firm needs USA Experienced industrial hygiene laboratory for pet food plant grain mill grain dust an grain testing for aflatoxins to determine whether or not the factory met the safety standards of the industry.

Description:
Hong Kong Clot hing Mnanufacturer needs South Aerica Microbiology Laboratory for mold testing on the surface of Garment / textile / Cloth product

Description:
Australia Veterinary Medicine Laboratory needed for equine serum Testing to analyze exactly what growth factors are evident.

Description:
Food Laboratory needed for spice testing: Glycemic Index and Total Dietary Fiber

Description:
USDA Certified Food Laboratory needed for milk raw testing: Microbiology Bacterial content and nutritional analysis of raw milk samples over time at various temperatures to follow bacterial growth in the milk.

Description:
US analytical chemistry laboratory needed for chemical composition confirmation analysis performed on the following chemicals: 1. Potassium sorbate by FTIR 2. Calfoam ES 302 or (Sodium lauryl sulfate 30%, 2 mole ethylene glycol) by QTFLCMS Quadrupole Time of Flight Liquid Chromatography Mass Spectroscopy 3. glycerine by NMR 4. phenoxyethanol by NMR 5. Pantaren or 2000N UP (decyl glucosi ...

Description:
Start-up Bioscience Company needs genetics laboratory for performing microarrays for DNA saliva testing 150-200 snips.

Description:
(California Preferred) Pharmaceutical analytical chemistry laboratory needed for impurity testing of small molecule pharmaceutical compound has generated an impurity during storage. We have an hplc method to separate the impurity, but we need to determine its structure.

Description:
USA analytical chemistry laboratory needed for purity testing of somatropin (Human growth Hormone)

Description:
FDA cGMP Medical Device Product Safety Laboratory needed for Cytotoxicity (1 item) Sensitization (2 items) Irritation / Intracutaneous (2 items)

Description:
Canada ISO bioanalytical laboratory needed forbioanalytical research study for Evaluation of the effect of crude oil contaminants as in-vitro endocrine disruptor and cell proliferation This research will evaluates the potential endocrine disruptor activity of substances by measuring whether and to what extent a substance induces cell proliferation via estrogen receptor (ER), androgen receptor (A ...

Description:
Detergent Manufacturer needs product safety toxicology laboratory for OECD tests: Skin irritation OECD439 Skin corrosion (human skin model test) OECD431 Eye irritation / corrosion OECD405 or Bovine corneal opacity and permeability OECD 437 Our concern is that we certain mixtures of detergents to eliminate corrosivity, based on the calculation method of the mixture classification according to CLP. ...

Description:
Toxicology Laboratory needed for Cytotoxicity testing of medical device packing material

Description:
Industrial Hygiene laboratory needed of ASTM elemental trace analysis of the indoor air in our manufacturing building using ICP-MS or GC-MS. Mainly we're most concerned about sulfur. There will be 7-8 samples.

Description:
Large food manufacturer needs FDA cGMP Laboratory for color testing

Description:
China toxicology laboratory needed for ocular safety study testing of biological based toy made from naturally ocurring marine luminous fluids. Acute testing and daily over 3 days

Description:
South Africa analytical chemistry laboratory needed for antiviral drugs testing for confirmator testing to Certificate of Analysis.

Description:
USA Materials Lab needed for optical testing: materials characterization of room temperature surface reflectivity in the 0.3 nm to 3.0 nm wavelength range on a 0.5" or 1.0" diameter sample of Mo5Si3 with a borosilicate glass surface scale.

Description:
URGENT: Biopharmaceutical Company needs Bioanalytical Laboratory needed for cell based assays 1. BrdU Incorporation Assay 2. XTT Proliferation Assay (HUVEC proliferation assay) 3. ViaCount Cell Viability Assay

Description:
USA Physical Laboratory needed for impact resistance testing on our safety glasses and the NRR on our earmuffs. We would only have 3 pairs for testing.

Description:
Europe analytical chemistry laboratory needed for GC analyses in oil products that we sample from groundwater tables (environmental investigation) We need fingerprint analysis for product identification. Also, we need to estimate the age of the product.

Description:
Large multinational corporation needs physical laboratory for Environmental Stress Testing: Run a combined vibration with heat temperature for 20 g-rms random vibration 5-500 Hz. Temperature up to 165 deg C.

Description:
Asia Packaging Laboratory needed for Laboratory testing required for paper egg tray and its allowable limit for the following parameter: 1. Tensile strength 2.Compression 3. Waterproofness 4. Moisture

Description:
Asia Material Laboratory needed for Fire, Smoke, Toxicity per FAA FAR 25 FST testing on carbon fiber composite

Description:
Lab needed for quality test (Ingredients) of bamboo made tissues. Thanks!

Description:
Agriculture Laboratory needed for soybean Certificate of Analyis testing of 2 types Soybeans: 1. Certificate of Quality - Protein content - Oil content - Free from Castor seeds or husks 2. Certificate of Chemical Residues - Arsenic compound, < 1 ppm (calculated according the arsenious oxide (AS203) content) - Mercuric compound, shall not be found. - Phosphides, < 0.05 ppm (calculated according to ...

Description:
Mechanical Laboratory needed for Gritting test for stabilink according to Renault specification. .

Description:
Pharmaceutical Laboratory needed for SPF Testing: Water Resistance test for sunscreen

Description:
USA Pre-clinical Contract Research Organization needed for preclinical virology studies: anti-HIV testing in cell-based assay

Description:
India Product Safety Laboratory needed for Cosmeceutical Testing of several products: In vitro SPF testing of topical creams and gels.

Description:
Europe Analytical Laboratory needed for AOAC Testing on Poultry Eggs

Description:
Europe Laboratory needed for Tekken test or ISO 17642-2 Destructive tests on welds in metallic materials -- Cold cracking tests for 5-10 Samples

Description:
Asia Biomedical Laboratory needed for ANSI / AAMI / ISO and ASTM Accelerated and real time aging studies to be conducted on sterile medical device to calculate shelf life to ANSI/AAMI/ISO 11607-1:2006ASTM F1980-07 (2011)

Description:
FDA GMP Preclinical Contract Research Organization needed for FDA GMP preclinical experiments: 1) Exposing human plasma to the test article to modified plasma proteins 2) Investigating the antiviral effect of the modified plasma protein on HIV-1 in vitro. The study protocol should meet the FDA requirements for antiviral drug (proving the concept). I appreciate if you could provide us the ...

Description:
USA Laboratory needed for Dressing Test for ore sample which contains MgO, SiO2 and Ag.

Description:
REQUEST FOR QUOTE quote for OECD Testing to OECD 301B & 306 to run lubricant grease along with the results timeline.

Description:
South America Compliance Lab needed to test sample of oxygen AVIATOR?S BREATHING,GAS in order to confirm the compliment of the specification MIL-PRF-27210 :

Description:
USA analytical chemistry laboratory needed for FCC Fluoride testing on Calcium Sulfate using FCC Method 1

Description:
India cosmetics laboratory needed for skin cream test of one cream of skin lightening

Description:
Railroad manufacturing company needs food laboratory for flavored drinking water formulation and ingredient testing.

Description:
University Researcher needs Asia environmental toxicology laboratory for risk assessment.. Multigeneration reproduction toxicity study in rats: Diethylhexylphthalate: Multigenerational reproductive assessment when administered to Sprague-Dawley rats in the diet. email: phonenumber: address:

Description:
Europe food laboratory needed for food packaging analysis of samples of grey back board material and we want a lab to make an analysis and tell us if the board is suitable for contact with foods and if not, what is wrong. We do not need technical details of the board as we have the TDS in our hands. Moreover, the samples are located in Sweden, so we need a close laboratory and also the costs.

Description:
Mumbai Immunology laboratory needed for perfume finished products tested for allergies

Description:
East Coast USA test lab neede for HPLC confirmatory testing to confirm that direct thermal paper suppliers who claim to use phenol-free color developers in their direct thermal coatings do not use phenolic-developers, such as Bisphenol A. Need a lab to test the total phenol content of papers known to contain phenolic-developers in the coating and those that do not. I assume this would be determi ...

Description:
Midwest analytical laboratory needed for Quality Control release testing: assay testing on n-heptane solvent samples with validated method. A validated method is required. Needed to release raw materials for pharmaceutical manufacturing.

Description:
Pharma needs USA Preclinical Contract Research Organization for Skin Permation Study on 4 Drug Test formulations Number of donor skins- 3 Number of test formulations- 3 (2 test and 1 reference) Number of replicates per formulation-6 Number of samples per diffusion cell- 11(4,8,12,24,32,48,72,96,120,144,and 168 hours)

Description:
University Researcher wants Product Safety Toxicology Laboratory for Carcinogenicity Researc Studies: in vitro testing of a new material to be used for discovering leakage in electric cables. What tests you recommend, how long does it take, and how much does it cost per sample?. Thank you.

Description:
Third-party laboratory needed for compliance testing of industrial grade modems for automation & instrumentation CCC for China...what is needed from us, the estimated cost, time-line and any other pertinent details.

Description:
Asia food laboratory needed for tea testing for Pesticide residue - Heavy metal (arsenic and mercury) - Chemical contaminant and adulterant - Natural toxin - Authenticity and ingredient profiling And what?s the price for each of them? Looking forward to hearing from you soon. T

Description:
FDA Laboratory needed for evaluation of organic oil marketed under FDA as "personal lubricant". Need oil analyzed as well as tube packaging materials. 510(k) consulting services neede as well. What is recommended complete process to achieve FDA approval and accompanying charges for services?

Description:
Pharma needs Preclinical Contract Research Organization CRO for preclinical toxicity study of some injectable drug candidates in rats (4 formulations in total). The samples are polymeric nanoparticles for treating liver cancer

Description:
USA Physical Chemistry Laboratory needed for particle analysis: Particle size distribution

Description:
USA DEA Licensed Laboratory needed for controlled substance testing: CHN analysis performed on a controlled substance. Two samples, duplicate analysis.

Description:
Europe pharmaceutical laboratory needed for suppository testing: Dissolution method for lipophilic ibuprofen suppositories

Description:
URGENT: Asia forensics laboratory needed for drilling project failure analysis. 3rd party lab which can analyze the reason of broken pipe and swivel. This is one of the urgent issue on a large Drilling work. This is a work making the underground tunnel for pipeline. (make the underground tunnel and put at there the pipeline by pulling) Unfortunately, one of drilling pipe was broken during th ...

Description:
University Researcher needs Africa Geology Laboratory for cathodoluminscence analyses done on 6 carbonate rock sample. I want to know how much it will cost.

Description:
Canada Food Chemistry Laboratory needed for Wine Testing : pH and Acidity test

Description:
Import brokerage firm needs FDA California food laboratory for chocolate testing to test product constituents to meet FDA requirements before we import products into USA. What is required and how much does it cost. We are currently in Paris until November 11th

Description:
FAA or EASA Accredited Laboratory needed for cargo tape testing to BMS specifications. Wish to get Cargo tape, used in the sealing application in Boeing Commercial Aircrafts

Description:
Product Safety Laboratory needed for ANSI Testinng of full body harness against the ANSI z.359 standard.

Description:
Europe food microbiology lab needed that can perform FDA B. Cereus testing to a frozen food item, currently in Sweden. It is imperative that the anlysis will be done to definite B. Cereus and not presumable B. Cereus, preferably using FDA approved methodology.

Description:
Clinical Research Organization needs USA Immunology Laboratory for Immunology Testing for IgA, IgE, IgG, IL-4, IL-5, IL-8 and IL-13, GM-CSF, MBP and ECP

Description:
East Coast USA Food Laboratory needed for nutritional facts testing for rice sample for package label purposes. Need info for Carbohydrates. sugar, dietary fiber, vitamins (A, B, etc), thiamine, niacin, protein, calcium, cholesterol, iron, sodium

Description:
China Laboratory needed for wine testing. 4 sample of wine samples

Description:
USA Cosmetics Laboratory needed for -1,4-Dioxane testing 1,4-Dioxane testing for 5 shampoo products

Description:
Asia or Europe OECD, GLP Laboratory needed for REACH Registration Testing: Pysicochemical and Toxicological testing for REACH Registration (EU Regulation for Chemicals)registration of the substance: ? IUPAC Name: (butylamine)[[2,2'-thiobis[4-(1,1,3,3-tetramethylbutyl)phenolato]](2-)-O,O',S]nickel ? CAS: 14516-71-3 ? EC: 238-523-3 ? The substance is solid. We ...

Description:
Food Laboratory for honey testing. Contamination Testing to test honey for any types of c4(Cane sugar or corn syrup).

Description:
California Materials Laboratory neeed for sneaker Testing of 3 sneaker samples with variation of materials. Leather Testing for determination of synthetic vs. natural leather.

Description:
New Jersey microbiology laboratory needed for shampoo testing of 4 shampoos. I would like to do micro testing on the formulas

Description:
USA mechanical laboratory needed for SAE basic fuel filter testing as outlined in SAEj905. I would like to test multiple filters for resistance to flow and filter capacity and contamination removal characteristics.

Description:
India Laboratory needed for Information Technology Product Testing testing

Description:
ASAP: Automotive Car Parts Manufacturer moving to new manufacturing plant needs for automotive car parts testing of exterior plastic parts like Front and Rear bumpers, wheel covers, in panels and so on, and your early reply is very appreciated!

Description:
USA or China food laboratory needed for food packaging testing of food packaging material (PE/AL/PET) with GC-MSand there is a slight odor from the inside of the bag. The packaging bag is small only 8 cm x 5 cm.

Description:
Dental Medical Device Manufacturer needs France biomedical laboratory for ISO 21563 dental alginates testing - 2 samples

Description:
UAE NABL / ISO Medical Microbiology Laboratory needed for clinical microbiology testing

Description:
Compressor manufacturer needs India ISO Laboratory for oil testing of Oil Content & dust particle to ISO 8573-1, content ta the out of compressor package as per standard ISO 8573-1 class 1 & 1 respectively for dust & oil content after the filter

Description:
Sweden FDA GMP Food Microbiology Laboratory needed for Microbiology Testing for B. Cereus according to approved FDA method

Description:
Microbiology Laboratory needed for school proect: Onion Testing Aerobic Plate Count for fresh whole peeled onions on day one? Coliforms target range, Yeast target range, and Molds target range.

Description:
Preclinical Laboratory needed for preclinical studies : Fibrosis model (e.g. bleomycin skin or lung, carbon tetrachloride liver or others) run in rabbit or guinea pig. Dose compound and conduct standard histology. Assess development of fibrosis in tissues and anti-fibrotic effect of compound.

Description:
USA Laboratory needed for CIPAC pesticide analysis. The product to be tested is an insecticide. Approximately 50 samples will require testing. Testing will include the following parameters: persistent foaming, wettability, dustiness, flowability, dispersibility, attrition, suspensibility, wet sieve, and appearance

Description:
Industrial Hygiene Laboratory needed for MIL-SPEC oxygen testing of AVIATOR'S BREATHING GAS in order to confirm the compliment of the specification MIL-PRF-27210, the sample can be send to your laboratory Airline

Description:
India mechanical laboratory needed for wall ceramic polishing machine line testing to use resin bond diamond squaring wheel. how to use wheel materials

Description:
Uniersity Researcher needs cinica laboratory for breast mil testing: Biological composition analysis of breast milk: creamocrit analysis of fat and sodium content by flame photometry is required on an ongoing basis for about 2 years as part of my PhD research. Likely to be repeated samples from around 100 women, so around 500 samples across the 2 years.

Description:
Europe, Switzerland, Germany, Italy or Scandinaia Laboratory needed for metal testing two metal strips: a) 0.5 mm Steel and b) 1.5mm Aluminium for the following: 1. Mechanical strength - resistance to static forces 2. Heat resistance 3. Electrical Arcing resistance Destructive testing to see failure points is required. More details on Contact

Description:
India food manufacturer needs asia packaging laboratory for packing material testing

Description:
Large COnsumer Products Manufacturer needs Asia analytical chemistry laboratory for Nitrosamine Testing in Triethanolamine to ISO Methods

Description:
Asia Laboratory needed for DEF (AUST) Testing to standard method of DEF(AUST) 5037. Specially DEF(AUST) 5037 method A4 and A5. And, IWS TM for 2000 version.

Description:
Aalytical laboratory needed for California Proposition 65 Nitrosamine Testing on rubber. Please respond quickly so we know if we are moving forward with your laboratory.

Description:
Environmental laboratory for complete water analysis . There are 32 tests that needs to be run to complete the water analysis. Thank you

Description:
Microbiology Laboratory needed for radiolabeled pharmaceutical compound testing. 1. Sterility assay/analysis + LAL on 14C or 3H labeled compounds. It may be as solid or most likely in aqueous solution. 2. Stability testing on the same (will provide analytical method SE-HPLC). This would be at 2-3 temperatures, no humidity considerations, for a handful of time points. None of this work would be GMP ...

Description:
Oil Laboratory for crude oil testing on following: Asphaltenes ASTM D6560; Flash point ASTM D56: Total sulfur, mercaptanes, H2S - UOP 163; Total nitrogen ASTM D4629; Bromine number ASTM D1159; Heat of cumbustion ASTM D240; Ashes - ASTM D482; Metals - ASTM D5708, D5863, IP-501; Chlorides - ASTM D4929, UOP 779, UOP 588; Organic chlorine; Wax content; Atmospheric and vacuum distillati ...

Description:
USA MATERIALS LABORATORY NEEDED FOR GENERAL MOTORS SEALING TESTING TO GMW3155 - GMW3149/GMW3152

Description:
Distilery needs USA FDA GMP Laboratory for Alcoholic Beverage Product Safety / Compliance Testing. Propylene Glycol Assay on a beverage alcohol. The anticipated results are 10-10,000 ppm. We will initially be sending 2-4 samples, and will be sending additional samples (2-3 at a time) periodically.

Description:
Canada Preclinical Contract Research Organization needed for Drug Discovery Research (Antimicrobial testing and Cytotoxicity testing ) to test 3 compounds in antimicrobial assays and human skin-cell line toxicity screens. Antimicrobial assays should include 2-3 Gram + bacteria, 2-3 Gram - bacteria, and 2-3 fungi. Cytotoxicity screens to be performed on keratinocyte and fibroblast cell line. We r ...

Description:
Middle East Analytical Laboratory needed forsudge / solid wast testing: XRD scanned data acquisition and phase identification XRF compositional analysis Scanning Electron microscopy Chem Scan

Description:
Environmental Laboratory needed for Radionuclide analysis in water, oil, solid and sludge Detailed Specification( Bq/l) 3H, 139Ce, 99Mo ,7Be ,141Ce ,96Tc ,14C ,143Ce ,97Tc ,22Na ,144Ce ,97mTc ,32P ,143Pr ,99Tc ,33P ,147N, 97Ru, 35S, 147Pm, 103Ru, 36C1, 149Pm, 106Ru, 45Ca, 151Sm, 105Rh, 47Ca, 153Sm, 103Pd, 46Sc, 152E, 105Ag, 47Sc, 154Eu, 110mAg, 48Sc ,155Eu, 111Ag, 48V, 153Gd, 109Cd, 51Cr, 160T ...

Description:
East Coast USA Product Safety Laboratory needed for toy safety testing services of a plush toy using unconventional stuffing. This stuffing, visco elastic memory foam, is commonly found in memory foam mattresses. We want to confirm that this product can be safely used in toys. We only want to test the safety of the stuffing, not the entire toy. Please send me an email about about the services and ...

Description:
United States FAA recognized laboratory needed for ASTM Materials testing and environmental testing of biochemical multi-purpose general cleaner for broad aviation applications. FAA AC-43205 requires testing under 6 ASTM protocols.

Description:
Canada analytical chemistry laboratory needed for surfactant testing. Surface Tension testing of non-ionic surfactant

Description:
West Coast USA Alcohol and Tobacco Tax and Trade Bureau (TTB)Compliant Laboratory needed for wine testing: Test Alcohol % in wine samples

Description:
Europe environmental laboratory needed for ASTM Testing: soil testing Organic matter contents and decomposition rates of sediment and soil samples to Rock Eval 6 prolysis or Thermogravimetry (ASTM E1641-13)(between 12 and 36 samples).

Description:
CANADA BIOMEDICAL LABORATORY NEEDE FOR COMPUTER-ASSISTED SPERM ANALYSIS ASSESSMENT OF HEPATO-, NEPHRO- and RENAL BIOMARKERS IN EXPERIMENTAL ANIMALS

Description:
INDIA ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR SOLUTION TESTING OF SOLUTION USED IN REMOVING COLOR FROM PRINTED PAPER . WE WANT TO KNOW ABOUT SOLUTION. WE GIVE YOU SAMPLES.

Description:
Canada analytical chemistry laboratory needed for ingredient testing of nature hair growing product in the market. We need a certificate to approve that all ingredient are nature, not including any medicine ingredients.

Description:
USA FDA Food Lab for FDA GRAS and EU NOvel food testing We are manufacturing 100% plant-made salt from Salicornia. We require detailed analysis including composition analysis, specifications and stability data of the ingredient for a GRAS determination in USA and filing a novel food application within the European Union.

Description:
USA Food Laboratory needed for steak testing forTotal Volatile Nitrogen (TVN)of Raw samples of striploin steak, tenderloin peeled, T-bone steak, and ribeye steak

Description:
USA Materials Laboratory needed for catalyst testing. The material is either a Catalyst, containing some nickel (we would want to know the exact content) or it may just be a ceramic catalyst support, we'd like to find out it's properties

Description:
LONG-TERM: Northern California Laboratory needed to analyse lubrication oil on regular basis during ba trial period. The oil is used on a commercial centrifuge drive.

Description:
Pharmaceutical laboratory needed for Bee Venom testing as medical components and also for melittin concentration testing .

Description:
FDA Medical Device Preclinical Laboratory needed for medical lubricant testing for FDA 510k: cytotocity., vaginal irritation and systematic toxicity,maximum sensitization, condom compatablity and All tests needed for personal lubricants including condom compatibility.

Description:
Asia or Europe Laboratory needed for PPE personal protective equipment testing of chemical protective garment according to EN standard EN 13034 and EN 13982 for CE Type 5,6 garment testing.

Description:
India agriculture laboratory needed for garlic testing: analysis of organosulfur compounds in garlic

Description:
State of Ohio EPA toxicology Laboratory needed for EPA Acquatic toxicology studies. Perform a Whole Effluent Toxicity (WET) for a wastewater treatment plant effluent for NPDES permit.

Description:
Asia analytcal laboratory needed for VOC (volatile organic compounds) testing on laser printers

Description:
Canada Food Laboratory needed for seafood Testing of two seafood products one is Lightly Salted Matjes Herring Fillets in Oil which come in a plastic pouch and the other is a bottled product that is marinated in vinegar. Both are small sizes 250 g I believe. And both are refrigerated. Please provide me a breakdown for the testing we require as well as the quantities that would e required for each ...

Description:
USA Alcohol and Tobacco Tax and Trade Bureau (TTB) Certified Wine Laboratory needed for wine testing: sulfate test for 'sulfite free' label Lab must be ttb certified. Limit is 10 ppm

Description:
USA FDA registered Food Microbiology Laboratory needed for Food Produce Wash Testing of Produce Wash to eliminate bacteria, like eColi. Test tube/in vitro assay ?Produce Wash would be directly inoculated with the target organism(s), and measure the product?s efficacy in different time intervals.

Description:
USA electronics laboratory needed for battery testing of remote controlled helicopters

Description:
US analytical chemistry laboratory needed for silver nitrate titration test to determine PPM for quat. (solution is quat & water)

Description:
USA geology laboratory needed for ASTM Testing: Elemental analysis of clay

Description:
USA Materials laboratory needed for EPA waste contaminant characterization testing of waste Rags/ Wipes/ Gloves with paint related material to EPA methods. Lab nees to pull samples and characterize waste of contamination with -chips of concrete and paint -rags with slime -propylene glycol -oils with water -wipes with acid EPA methods, TCLP, EPA 8260 &8270 flash point.

Description:
United States FDA approved contract research organization needed for clinical testing of medicine that eliminates diabetic ulcers and other skin sores.

Description:
University Researcher needs Africa oil laboratory for ethanol emission test

Description:
Saudi Arabia or UAE geology laboratory needed for ASTM testing of marble and granite stone for physical properties similar to compressive strength, flexural strength to ASTM C503 and ASTM C615

Description:
USA food laboratory needed for deformulation Testing of hot sauce

Description:
USA analytical chemistry laboratory needed for Solution Osmolality Testing. I need only a small amount measured and have one or two samples. how much would it cost?

Description:
USFDA approved lab needed for pharmaceutical excipient testing.

Description:
Pharmaceutical Laboratory needed for USP pharmaceutical testing : USP class VI cytotoxicity testing. Please contact me at your earliest convenience. Thank you in advance!

Description:
University School of Medicine needs US clinical laboratory to provide costs of measurements for viscosity and osmolarity for 4-5 aqueous samples. No biohazards these are sterile solutions suitable for cell culture.

Description:
Asia Test Lab needed for specification testing of HSD and MFO, in accordance with full specifications (Our sample of HSD & MFO is already in Kualalumpur ) Above all assistance and cooperation we thank you, in wait for the good news

Description:
Polymer Laboratory needed for Permeability test of PET (Plastic 120 ml size) bottles.

Description:
Europe independent environmental laboratory needed for environmental waste testing: checking wastes for H3A and H 12 properties .

Description:
TGS Australia and EPA North Carolina USA Microbiology Laboratory needed for Surface Sanitizer Product efficacy evaluations against T.B

Description:
University Medical School needs USA FDA GMP Clinical Laboratory for serology testing Hep B/C and HIV serology testing on cadavers. I will need testing done whenever donor bodies are delivered to the Med School.

Description:
Asia Laboratory needed for Desert Climate (Natural weathering test) follow standard ISO 877 method A,Plastics - Methods of exposure to solar radiation for 2 years and evaluate every 1 years

Description:
ANALYTICAL LAB NEEDED FOR DEFORMULATION OF ORGANIC PRODUCT

Description:
India Laboratory needed for analytical testinf for Analytical report in respect of IV Extension Sets PVC Free. ( Medical Device ) HS Code 9018.

Description:
USA Color testing laboratory needs salt chamber tests , salt cell to Standards Association NORSOK

Description:
Developer of line of alcohol based bitters that need to be classified as an alcohol based food additive according to the TTB needs Food Toxicology Laboratory. In order to have that classification the TTB requires a test done on them to say they are unfit to drink as an alcohol beverage.

Description:
Europe GMP Biomechanical Laboratory needed for ASTM Testing of surgical adhesive: F2255, F2256, F2258

Description:
Power plant needs ISO India Laboratory for is lots coal testing, oil testing, water treatment, and its cycle also. Boiler water cycle, flue gas cycle & many more cycles included.

Description:
USA or South America Laoratory needed for petrochemical testing: 1- isotopes ( total crude, saturates, aromatics ) 460 samples 2- analysis of extended diamantoids ( QEDA ) 96 samples 3- Analysis of bio markers with double spectrometry of masses ( AGC-MS-MS) 90 samples 4- IRGC-MS (CSIA-B) of isolated bio markers ( hop and and strange fracts) 90 samples 5- IRGC-MS (CSIA-D) of isolate ...

Description:
USA third party laboratory (Florida preferred) needed for third party efficacy cerification testing: insecticide / Citrus Greening / HLB Antibiotic Testing We are in need of testing the efficacy and dosing levels of our all natural compound (FDA considers it generally regarded as safe.) needed to kill Huanglongbing "HLB" bacterial disease aka "Citrus Greening" and/or bacterium Candidatus Liber ...

Description:
USA food chemistry lab needed for nutritional testing and ingredient testing in ready-to-drink beverages and dry powder based beverages for composition of following ingredients: 1. Iron 2. Zinc 3. Sugar/Sweetener 4. Fat/Edible Oils 5. Milk Solids 6. Cocoa/Chocolate 7. pH Value PLEASE PROVIDE THE FOLLOWING: 1. If you can test and let us know the composition of any of these ingredients. ...

Description:
USA Analytical Chemistry Laboratory needed to provide a quote on ASTM Testing for the aniline point (ASTM D611) testing of 12 samples, and the turnaround time. PLEASE PROVIDE PRICING AND TURN-AROUND

Description:
LONG-TERM TESTING: Pharma needs Lab for water Testing of water produced by the company water purification system for resistivity and total organic carbon. Minimum 8 samples within 3 months will be submitted weekly. Testing results needed for operational qualification of the internal water purification system. Purified water is used only for analytical purposes (HPLC and GC).

Description:
MILK BASE FOOD PRODUCT MANUFACTURER NEEDS KOLKATTA FOOD SCIENCE LABORATORY

Description:
Preclinical Contract Research Organization CRO needed for Performance testing in a canine jaw model

Description:
USA laboratory needed for organic beauty products safety testing of line of beauty products.

Description:
Need to Source a Mainland Europe or Par East Lab to perform retention testing in accordance with ISO 7864:1993, Sterile hypodermic needles for single use, section 13.1 Bond between hub and needle tube, which states; ?The union of the hub and the needle tube shall not be broken by the minimum force given applied as push or pull in the direction of the needle axis.?. The force taken from the referen ...

Description:
ISO Physical Laboratory needed for ISO Acoustic Testing of Duct Fan In duct sound power for a small ducted fan at 5 different speeds to (ISO 5136 Acoustics -- Determination of sound power radiated into a duct by fans and other air-moving devices -- In-duct method)

Description:
2 FDA approved test labs needed that can test Chinese herbal supplements for metals and for fungus/parasites/microbial pathogens? Prefer labs in USA Mid-Atlantic, East Coast area, if possible.

Description:
Food laboratory needed for sport's nutrition supplement testing of 2 creatine sport nutrition products from two different companies that I would like to be tested if they have a substance that not labeled on the product. Would you be able to test that and how much would the process cost?

Description:
India analytical chemstry laboratory needed for animal feed testing: Require Non Structural Carbohydrates content % in animal feed

Description:
Analytical Chemistry Laboratory needed for organic beauty products testing: Four samples of organic body balms, 4 samples of organic lip balms and 4 samples of sugar scrub to be submitted in 15 ml sample jars for the following testing. 1. Physical / Chemical Stability Tests a. Temperature Variations: High temperature testing for a predictor of long-term stability. High temperature testing at 37oC ...

Description:
Taiwan laboratory needed for GLP analysis study for two pesticides.

Description:
USA Pharmaceutical Laboratory needed for Photostability Testing on pharmaceutical gum in packages.

Description:
Office Furniture Manufacturer and Exporter needs certification laboratory for certification testing of office chair sold through Amazon Canada which export from USA to Canada. Amazon Canada requests us to submit testing documentation for our office chair.

Description:
USA cGMP Pharmaceutical Toxicology Laboratory needed for JP 7.03 Cytotoxicity testing of Rubber Stoppers

Description:
Flexible packaging company needs genetics laboratory for gDNA-free certification testing.

Description:
Food Laboratory needed for yougart stability testng. Test yogurt cups for stability in florescence light to mimic supermarket conditions 45-60 days

Description:
Midwest USA analytical chemistry laboratory needed for contaminant testing for nutraceutical / dietary supplement / food products for purity

Description:
West Coast USA Materials Laboratory needed for Safety Testing: Materials / Cut Resistance Require a tester for ASTM F1790, Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing

Description:
USA polymer laboratory needed for rubber testing: Max load test on rubber deflector 5 piece test on what is the max load these rubber components can withstand.

Description:
Ariculture laboratory needed for soil analysis for minerals

Description:
USA Toxicology Laboratory needed for Toxicology Studies: Environmental Fate Studies and Pathway Studies: Anaerobic Biodegradation Aerobic "Ready" Biodegradability Aerobic "inherent" biodegradability Aerobic Biodegradability in Seawater Ecotoxicity Testing

Description:
University Researcher needs Asia acoustics laboratory for ISO acoustics testing: absorption coefficient of Biomass waste material as acoustic absorber.

Description:
California Electrical Laboratory needed for power switching box testing of: Short Circuit test to 10KA for an Auto Power Switching Box UL1008 approval but the samples failed the short circuit tests (close and withstand tests) at 5KA. The components themselves are rated min of 5KA; breakers are rated 10KA and Contactors are rated 5KA. I am building some other options by substituting the original c ...

Description:
UK ISO and UKAS analytical chemistry laboratory needed for Ingredient testing of topical sports application

Description:
India materials laboratory needed for export testing the resin wash basin to be exported to uk and europe.

Description:
ME Engineering Researcher needs India Mechanical Laboratory Fatigue test in composite rectangular plate ASTM D3479. fatigue life of GFRP composite laminates. But here, the testing facilities are rare. So i need to conduct fatigue test in rectangular specimen. I have prepared standard ASTM 3479 specimen

Description:
Food Laboratory needed for healthy powder juice drink, beauty products testing

Description:
Texas Laboratory needed for Lubricity Testing for O&G Pipe on Pipes. We have a customer who is wanting us to run an independent lubricity test on our Pipe on Pipe product used in Coiled Tubing vs. what they are currently using. We typically use the below method but are open to better methods. Method: Each lubricant is tested on the OFI Lubricity Tester. The lubricants were mixed with tap wat ...

Description:
UK UKAS accredited laboratory needed: Product safety laboratory needed for product safety testing of topical sports spray Testing analysis of product ingredients

Description:
Electrical Laboratory needed for research study for studying a printed circuit board's (PCB) in-plane CTE and out-of-plane warpage induced by a steady state isothermal temperature TEST ARTICLE: Bare printed circuit board (approximate size of 4"x6") TEST CONDITIONS: STEADY STATE ISOTHERMAL: -40C, 25C, 85C, and 100C DESIRED DATA OUTPUT: 1) In-plane Coefficient of Thermal Expansion (CTE) across the f ...

Description:
Middle East environmental laboratory needed for drinking water testing of water samples for different drinking water wells suspected to contain radionuclides, discovered during geophysical logging.

Description:
Consumer Products Laboratory needed for CSPC toy testing: plush toy product tested for CSPC and CA65. What type of tests will be required? Also, what would the price be for the tests? The toy is manufactured in China and will be imported. Thank you for any help you can give me.

Description:
Japan or Korea product safety laboratory needed for make-up consumer products safety testing: allergy or skin irritation for make up

Description:
Biotech based environmental company for waste water treatment needs analytical lab studies and microbiology lab work.

Description:
New Jersey Laboratory needed for Microstructure steel / Tungsten testing including: Mount parts. polish, etch and picture the micro structure.

Description:
Toy distributor needs consumer products safety laboratory for toy product safety testing including phthalate testing there have been many reports of high levels of phthalates and other dangerous substances of competitor product which we suspect are not suitable for children use. those products dont have any safety mark or any other EU certificate.

Description:
Large chemical manufacturer needs India ISO analytical chemistry laboratory for ISO Testing and ASTM Testing of Slurry sample (~25 weight % metal particles in oil). We want to know the viscosity of this slurry in temperature range of 70-90 degree C at different shear rates.

Description:
India Laboratory with ISO 17025 accreditation needed for oil filter testing

Description:
University Researcher needs Asia or India Food Laboratory for antioxidant testing in Pasta. Grape Pomace is incorporated in Pasta. So antioxidant capacity has to be determined.

Description:
USA consumer produts safety laboratory needed for ANSI certification testing of carbon fiber helmets

Description:
Food Laboratories needed for fruit testing: Certificate of of Analysis validation testing.

Description:
FDA cGMP biomedical laboratory needed for FDA testing of new feeding tube.

Description:
Maharashtra analytical chemistry laboratory needed for edible oil testing

Description:
URGENT: USA analytical chemistry laboratory needed for chemical analysis for barite. it is urgent!

Description:
Large food manufacturer needs USA, China or Asia food microbiology laboratory for Extraneous analysis and microbiology testing. Analysis of chocolate liquor, cocoa powders for insect fragments and rodent hairs. Microbiology - analysis of ingredients and finished chocolate confectionery products.

Description:
USA Southern California Analytical Chemistry Laboratory needed for dietary supplement testing of Single sample of dry white powder believed to be alpha choline. Need breakdown of what the contents of the powder is.

Description:
USA Materials laboratory needed for diesel fuel testing to JFTOT ASTM D3241 testing #2 ULSD #2 <15 ppm sulfur diesel fuel 3-5 samples

Description:
Mexico mechanical laboratory needed for automotive specification testing of painted automotive exterior plastic handles testing to VW TL 211 2014-07

Description:
Europe analytical chemistry laboratory needed for isinfectat testing. Packaging is a small plastic spray bottle of approx. 30-40ml. The liquid inside is water like and the ingredients are: 1. Aqua 2. Alcohol-Denat 3. Melia 4. Azadirachta Extract 5. Xanthan Gum The list of ingredients have been taken from the current product in market. The spray can be used to clean hands, face and/or be used as m ...

Description:
Manufacturers of consumables for the Civil Aviation Industry need India or Asia laboratory for FAA Testing. Tests as per FAA as well EASA test protocols: P-640 Carpet Mounting double face adhesive tape as per BMS specifications - 5-133C. P-205A, Glass Cloth Tape, coated with FR Acrylic adhesive as per BMS Specifications 5 -146A. Popularly known as Cargo Tape. Placards, Interior and exterior Labels ...

Description:
Asia / India Materials Laboratory needed for ASTM Testing: Thermal aging of rubber in n propane pressurized container ASTm D 471

Description:
Europe consumer safety laboratry needed for certification testing of undyed, eco-friendly carpet. Certificatio testing to included testing to show it is free of diseases and chemicals.

Description:
Asia Bioanalytical laboratory needed for protein analysis: rice protein & pea protein samples. Analysis are listed below. 1. Allergen soya testing by ELISA 2. Allergens Gluten testing by ELISA 3. GMO testing by Real time PCR 4. Heavy metal testing by ICP-MS 5. Pesticide residue testing

Description:
New York City Food laboratory needed for reverse engineering on a hot sauce.

Description:
Bioanaytical laboratory needed for human recombinant insulin testing for insulin crystal quality, purity of the insulin? We would appreciate it if you could send us more detailed information about it as well as cost.

Description:
USA analytical chemistry laboratory needed for syringe testing: 5 samples of solution in syringes pH Osmolarity Osmolality

Description:
USA electrical laboratory needed for electrical Testing of components (transformers, protection equipment, etc) against power grid (15kV) and up voltages.

Description:
USA food laboratory needed for Sulfite testing for red wine. Required for "sulfite free" labeling

Description:
Food Laboratory needed for food microbiology and chemistry testing

Description:
India mechanical laboratory needed for Vibration testing in Z axis, Pressure impulse test, SWAAT test, Internal corrosion test, on Automobile Radiator, Charge air coolers. Qty : Batch of 3 quarterly every year.

Description:
USA Laboratory needed for microscopy and imaging to visualize localization of a detection probe to low levels of antigen on the surface of a target cell

Description:
United States polymer laboratory needed for REACH compliance testing: project that has been approved that will use our reprocessed Copolymer Polypropylene black pellets. In order to move forward with this project, our customer is requiring us to provide them with a REACH compliance letter along with test data. I am in search of a company that will be able to provide this information for u ...

Description:
Clinical Research Organiation needs central clinical laboratory needed for urine analysis for Growth Hormone in Urine.

Description:
University Researcher needs Dubai analytical chemistry laboratory for biofuel testing: 9 samples for Hydroxyl Value tests 5 Samples for Glycerin tests Please let me know the price of each test and the least amount of each sample.

Description:
USA, China or Europe laboratory needed for green tea testing for certificate of analysis for a green tea extract. For five samples

Description:
Consumer Products Laboratory needed for Consumer Products Safety Testing: natural eyelash adhesive testing. We would like your labs to establish that the product is all natural and safe and that it will function as intended.

Description:
Asia Medical Device Laboratory needed for cleaning validation testing on stainless steel implants. Before packaging, we will have an IPA ultrasonic cleaning to remove fine particles/dust and finger print. But we do not know how to validate this. So would like to check if your lab has experience in this?

Description:
USA geology laboratory needed for elemental analysis on hard rock concentrates to get an accurate percentage or ppm number of the precious metals and rare earth elements that is in my material. The precious metals I would be interested in having in the test would be: Platinum, Rhodium, Gold, Iridium,Osmium, Palladium, Rhenium, and Ruthenium. And the rare earth elements I would be interested in wh ...

Description:
USA analytical chemistry laboratory needed for ddisinfectant testing. Samples will be distilled water, seawater and milk I will need determination of iodine, iodide, iodate and iodinated disinfection byproducts. Number of samples will vary

Description:
Puerto Rico geology laboratory needed for rock testing. Iron testing for the amount of iron and other minerals present in the sample. Can you do this and how would it cost?

Description:
Playground equipment manufacturer planning on entering USA market needs product safety laboratory for playground equipment testing: ASTM norms (ASTM F1148& ASTM F1487)? Please, find the list of products enclosed. There are 39 products altogether: 36 for residential home playgrounds, 3 for commercial playgrounds. Also, some of products have several color variants. We would like to receive fr ...

Description:
East Coast USA GLP Certified Preclinical Contract Research Organization CRO needed for Product Safety Environmental Toxicology Studies: Acute oral LD50 Study, Acute Dermal LD50Study, Acute inhalation LC50 Study, eye irritation study, skin irrational study, dermal sensitization study

Description:
USA FDA GMP Contract laboratory neomycin API testing to European Pharmacopoeia monograph method for Neomycin Sulfate. Impurity testing completed on three lots of API. I will need to know the approximate cost and potential turn around time.

Description:
Scandianavia or Europe Environmental Toxicology Laboratory neded for ecotoxicology studies: Ala-d activity, fish blood samples, approx. 80 samples

Description:
UKAS ISO 17025 Certified food laboratory needed for Arabica coffee testing for presence in coffee liqueur. Would also like to verify geographical origin.

Description:
USA Materials Laboratory needed for ASTM polycarbonate testing to ASTM G153 test cycle 1 environmental weathering testing: 15 flat samples (2x2 inch) 15 curved samples (2x2 inch) All samples are directional requesting 500hr and/or 1000hr evaluation visual for color change, hazing, optics

Description:
Research Institute needs medicinal chemistry laboratory needed for Plant Authentication studies of plant species using anatomy and histochemistry studies

Description:
USA FDA GLP Toxicology Laboratory needed for FDA / OECD Testing : 90-day subchronic toxicity test in rodents of a beverage to OECD 408, FDA IV.C.4.a, GLP

Description:
USA Food Laboratory needed for water testing: 4 samples, nutritional labeling and ingredient verification.

Description:
Europe Preclinical Contract Research Organizations needed for topical multifunctional drug study The tests can be performed very quickly, since the drug is applied topically and the effect is immediate due to the specific mode of action.

Description:
Mechanical Laboratory needed for mechanical testing to EN 13121-3,GRP tanks and vessels for use above ground. Design and workmanship a. Textile Glass Content b. Unit Modulus of Tensile Elongation c. Tensile Strength at Rupture d. Inter laminar Shear Strength e. Barcol Hardness f. Short Term Creep Behavior g. Flexural Strength as per EN 13121-3 annex D

Description:
Brazil Geotechnical Soil Testing Laboratories needed for ASTM Testing or S Testing: Soil Analysis for Classification, Strength, Consolidation and Chemical Testing

Description:
Research Institute Professor needs middle east analytical chemistry laboratory for roc testing: x-ray fluorescence, ICP, instrumental neutron activation analysis