Incoming Geotechnical Laboratory Test Requests

Contract Laboratory has received the following Geotechnical Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Geotechnical Laboratories to perform their Geotechnical Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Geotechnical laboratory that would like more information on these Geotechnical projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Geotechnical laboratory test requests. Please log in to see more.

17-01337

Geotechnical

University researcher needs geotechnical laboratory for rheological test on bitumen such as penetration test, softening point test, viscousity test, ductility test and specific gravity test

Submit Response

17-01235

Geotechnical

Mining company needs geotechnical laboratory for complete analysis of ore sample for their compounds and elements and their proportions. Analysis is to assess the precious metal, rare earth and complex compounds for industrial use.

Submit Response

17-00971

Geotechnical

Geotechnical laboratory needed for cold compression strength CCS analysis of iron ore lumps. Each sample will be provided individually and must be analyzed separately to avoid mixing or contamination. After analysis carried out, each sample must be preserved separately.

Closed

17-00934

Geotechnical

LONG-TERM TESTING Large UK consulting firm needs geological laboratory for monthly geotechnical soil tests including: sulphate reducing bacteria/reduction/oxidation potential/pH (corrosivity test), electrical resistivity, XRD test, resonant column, cyclic shear strength under combined average and cyclic loads for triaxial and direct simple shear (DSS) stress paths, creep data to define loss of strength under sustained load, remoulded soil consolidation characteristic (compressibility and permeability), reconsolidated remoulded soil strength characteristics, and thixotropy.

Closed

17-00884

Geotechnical

LONG-TERM TESTING Geotechnical laboratory needed for drill core testing for open thin section preparation from drill cores including EMPA analysis in open thin sections, whole rock chemistry analysis (+REE), zirkone, ortite, monazite, and apatite.

Closed

17-00579

Geotechnical

Mining company needs geotechnical laboratory for metallurgical testing: mineral analysis of mining rock samples

Closed

17-00470

Geotechnical

Construction laboratory needed for core testing of concrete samples

Closed

16-01981

Geotechnical

Geotechnical laboratory needed for physical properties of different slurries, solids and liquid:
Color
Solid Concentration (TSS+TDS)
Heat of Formation
Specific Gravity
Specific Heat Capacity
Viscosity
Heat of Vaporization
Thermal Conductivity
Surface Tension
Dielectric Contstant
Solubility in Water
Melting Point
Boiling Point

We are a biofuel company, we convert biomass to sugars and would like to evaluate physical properties for our commercial plant development.

Closed

16-01379

Geotechnical

Geotechnical laboratory needed for AASHTO Testing to AASHTO T164 method D, Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) Need lab to conduct test method on asphalt cold mix.

Closed

15-01975

Geotechnical

Geotechnical Laboratory needed for Laboratory Testing of Non-evacuated & Expanded Perlite (P05). Density, Moisture content, thermal conductivity, pH and Particle size

Closed

15-01556

Geotechnical

Japan Geotechnical laboratory to send needed with a test method for soil compaction using a rammer and a test method for the CBR

Closed

15-01341

Geotechnical

Geotechnical Laboratory needed for core Chemical/mineral testing of a tripolitic chert/limestone deposit as a possible source of tripolite/diatomaceous earth for Filter/Food/Drug/Agricultural use. Testing of core and wall samples to determine if they contain suitable characteristics for tripolite/diatomaceous earth products.

Closed

15-01187

Geotechnical

Asia geotechnical laboratory needed for ASTM Borehole Drilling Core testing Cerchar Abrasivity Index (CAI)-abrasiveness for cutter wear during raise boring and drilling tools (blast holes)
? Multistage Triaxial Test in rock;
? Further UCS and point load tests;
? Further tensile strength tests.
? Triaxial testing of soils sampled from road alignment (R1-R10)

Closed

15-01185

Geotechnical

Asia geotechnical laboratory needed for water-based drilling fluids testing (mud). Differential sticking testing for water-based drilling mud.
It will be my greatest pleasure for your response.
Thank you.

Closed

15-00780

Geotechnical

Egypt Geology laboratory needed for geotechnical testing: Pull-out tests for Pull-out and lateral-pressure test. Pull-out Tests (#1) must be carried out with ramming-machine (Gayk HRE 1000 or similar) or adapted-backhoe drive-head suited for direct-driving (ramming). The profile to be rammed must be of type C 180x70x40 (minimum 40mm thickness required). The ramming depth must be 1.2-1.9m

DPSH tests (ISO 22476-2:2005: Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing)

Trench pits description and testing (pocket penetrometer)

DCP-CBR in situ tests

Undisturbed samples

Disturbed samples (either by SPT or in trench pits or both)

Electrical Resistivity test (Vertical Electrical Sounding - VES).

Grain size
Plasticity (Atterberg limits)
Sulphate content
Chloride content
PH
Shear stress test (UU)
Oedometric tests (UU)
Triaxial tests (CD)

Closed

15-00500

Geotechnical

Geotechnical metallurgical laboratory needed for iron ore testingof Raw-Material Iron Ore -325 Mesh 75% + test & results of Concentrate Grade 63.5 FC?? How much quantity you will be required of raw-material iron ore -325 mesh 75% + for testing of final output Concentrate Grade 63.5 FC. Material Grade: -325 mesh 75% + iron ore test Vs Output Grade: Concentrate Grade 63.5 FC results?? 1- In Tailing what is FE % in iron ore sample -325 mesh 75%+??? 2- Tailing wastage %??? 3- Tailing moisture%??? 4- Latter/letter write % in iron ore sample -325 mesh 75%+??? 5- Goethite composition contain %??? 6- MNO contain %??? 7- Phosphorus contain %??? 8- Recovery %??? We needful above all testing contain report for our output Concentrate Grade 63.5 FC. If there anymore & Other test required which belong to output Concentrate Grade 63.5 FC results.

Closed

14-01509

Geotechnical

Marine Engineering company needs Egypt geotechnical laboratory for ASTM Testing: ASTM-BS soil and rock testing

Closed

14-01144

Geotechnical

Brazil Geotechnical Soil Testing Laboratories needed for ASTM Testing or S Testing: Soil Analysis for Classification, Strength, Consolidation and Chemical Testing

Closed

14-00314

Geotechnical

Mining Company needs geotechnical laboratory for early stages of testing manganese mining samples and core samples. The samples that we have are samples obtained at the surface as well as core samples obtained between 2-3 meters down. We are looking to establish a long range relationship with a laboratory that can test crude ore samples, in process samples and final (pure metal) samples for manganese content and impurity levels. In the event we can establish a relationship, we would like to know whether you would allow us to audit your lab, Towards that end, kindly provide me with a schedule of what it would cost to test samples. Please feel free to contact me.

Closed

14-00212

Geotechnical

Australia company needs Asia Geotechnical laboratory for mineral analysis of Cu-Au and other minerals for mining purposes.

Closed

14-00182

Geotechnical

Middle East geotechnical laboratory needed for oil recovery studies. inner diameter of slim-tube used in enhanced oil recovery study of the AMAL B reservoir ,

Closed

13-01274

Geotechnical

Africa geology laboratory needed for geotechnical testing

Closed

13-01104

Geotechnical

Geotechnical laboratory needed for iron testing: % of iron on metal samples ,,,

Closed

13-01048

Geotechnical

Large multinational corporation needs New York materials laboratory for ASTM Testing: geotechnical analysis Testing for construction design and permitting for same.

Closed

13-00401

Geotechnical

South Sudan geotechnical laboratory needed to Conduct geotechnical investigation at Kidepo bridge site to deternmine the nature and characteristics of soil and to come up with the most effective and appropriate design for bridge abutments, pier and protection works, if any, as specified in the TOR. This include submission of Geotechnical Report with appropriate recommendations. Activties under this item are summarized below:
Drilling in sand clays to hard strata
(a) On land (Provisional Qty) m 30
(b) On water (Provisional Qty) m 15
Drilling in highly weathered rock
(a) On land (Provisional Qty) m 30
(b) On water (Provisional Qty) m 15
Drilling in highly moderately weathered rock
(a) On land (Provisional Qty) m 30
(b) On water (Provisional Qty) m 15
Drilling in highly hard rock
(a) On land (Provisional Qty) m 30
(b) On water (Provisional Qty) m 15
Conducting SPT tests Test 225
Conducting undisturbed samples (Provisional Quantities) Nos 75
Laboratory Tests (Provisional Quantities)
(a) Sieve Analysis (Provisional Quantities) Nos 20
(b) Atterberg Limits (Rate Only) Nos 1
(c) Moisture Content (Rate Only) Nos 1
(d) Dry density & Wet density (Rate Only) Nos 1
(e) Consolidation (Rate Only) Nos 1
(f) Unconfined compression tests on rock/soil samples (Provisional Quantities) Nos 50
(g) Triaxial Compression (UU) (Rate Only) Nos 1
(h) Triaxial Compression (CU) Nos 1
(i) Specific Gravity (Rate Only) Nos 1
(j) Hydrometer Analysis Nos 1
(k) Soundness Nos 1
(l) Flakiness Nos 1
(m) Proctor Compaction Test Nos 1
(n) Swell pressure tests Nos 1
(o) Percolation test Nos 1
(p) Dispersion test (Rate Only) Nos 1
(q) Static Cone penetration test(Rate Only) Nos 1
Preparation of Geotechnical Investigation Report with recommendations in 3 hard copies and 1 electronic copy. L.S. 1

Closed

12-1145

Geotechnical

New York Geotechnical Laboratory needed for ASTM Testing geothermal testing to ASTM D-5334, Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure. It`s a geothermal test for sand and bentonite. Please we need i lab to test these samples.

Closed

12-1013

Geotechnical

Eastern USA and Canada Geotechnical Laboratory needed for ASTM Testing, Materials and Physical Testing: Conductivity Testing thermal and hydraulic on mix of sand and bentonite for geothermal application

Closed

12-0931

Geotechnical

USA geotechnical laboratory needed for ASTM Testing: Air Permeability to (ASTM 6539)

Closed

12-0907

Geotechnical

permeability (ASTM D2434)
sieve analysis (ASTM D422)
Eastern USA Geotechnical laboratory needed for ASTM Testing: carbonate content (ASTM D4373)
5 to 10 samples

Closed

12-0177

Geotechnical

West Virginia Geotechnical Laboratory neded for onsite Proctor Testing for Compaction
Load Test for Micropiles
ASTM D 4435 for DCP Anchors
ASTM A 4435 for Rock Bolt Anchor Test
ASTM C 109 for Cement Mortors
ASTM C 39 for Compressive Strength of concrete cylinders
ASTM D 1557 for compaction of soil

Closed

11-02454

Geotechnical

USA Geotechnical Laboratory needed for ASTM Testing, Rock Core Testing resonant column test on rock cores

Closed

11-02396

Geotechnical

Geotechnical Laboratory needed for geomechnical Testing of consolidated sands (indurated sands) for mechanical resistance, preferably shear resistance or resistance to an abrasive force. Standard ASTM 17892 (part 10 maybe) might be applicable.

Closed

11-02291

Geotechnical

Utah geotechnical laboratory needed for geotechnical testing: moisture-density, gradation, atterberg limits, triaxial compression, direct shear, consolidation, minimum resistivity

Closed

11-02248

Geotechnical

Geotechnical laboratory needed for bentonite testing AIP testing for bentonite. Please send me a quote

Closed

11-02022

Geotechnical

Geotechnical Laboratory needed for hydrocarbon testing of rock samples for natural gas

Closed

11-02005

Geotechnical

South Africa geotechnical laboratory needed for ASTM Testing: uniaxial compressive strength, tensile strength and shear strength of bore core samples

Closed

11-01919

Geotechnical

Petroleum Geologist needs geotechnical laboratory to test for presence of a shallow hydrothermal gold deposit from shallow surface samples.

Closed

11-01525

Geotechnical

South Africa Geotechnical Laboratory needed for UCS testing , Indirect Tensile Strength testing (brasilian), Direct Shear testing, Slake Durablity testing, Atterburg, Californian Bearing Ratio, Particle Size distribution.

Closed

11-00643

Geotechnical

NE USA ASTM Geotechnical Soil Laboratory needed for testing 2 samples for ASTM D5918 Frost Heave and Thaw Weakness Susceptibility.

Closed

11-00548

Geotechnical

Geotechnical Laboratory needed for Atterberg and Triaxial test

Closed

11-00257

Geotechnical

ASTM Geotechnical Laboratory needed for ASTM Testing: ASTM D4320-93 preparation of chemical-grouted sand; UCS (ASTM D1633 or D2850) and permeability (ASTM D5084)

Closed

11-00250

Geotechnical

ISO Geotechnical Laboratory needed for ISO shotcrete test according to ISO 9001 and/or ISO 17025

Closed

11-00073

Geotechnical

Geotechnical Laboratory needed for testing rocks which are used as building materials in molding,for roads..with grade of 6mm,12mm,20mm 40 mm

Closed

10-03105

Geotechnical

Israel ASTM Geotechnical Laboratory needed for testing PSLOGGER - Shear/seismic wave velocity,
OYO Presssurmeter - rock pressurmeter, working pressure up to 10MPa

Closed

10-03056

Geotechnical

Canada ASTM Geotechnical Laboratory needed for cyclic direct simple shear testing - evaluation of the liquefaction resistance of sand

Closed

10-02906

Geotechnical

Guinea Liberia Geotechnical Laboratory needed for testing typically CBR, compaction, shear strength, borrow materials testing

Closed

10-02448

Geotechnical

USA Geotechnical Laboratory needed for ASTM testing to ASTM D5918, 2 samples

Closed

10-02335

Geotechnical

Geotechnical Laboratory needed for testing unconfined compressive strength.

Closed

10-02187

Geotechnical

Phillipines Geotechnical Laboratory needed for Rock Mass Characteristics Testing;
Point load tests, Unconfined Compressive Test, Direct Shear test, Triaxial, Plastic & Liquid limit

Closed

10-01863

Geotechnical

Liberia/West Africa or surrounding Geotechnical Laboratory needed to perform testing.

Closed

10-01585

Geotechnical

India ASTM Geotechnical Laboratory needed for in-situ permeability tests and Laboratory permeability tests on undisturbed samples for clay samples in accordance to ASTM D-5084.

Closed

Submit Geotechnical Testing Requests for Geotechnical testing and Geotechnical Scientific Research