Laboratory Test Requests

Description:
India analytical chemistry laboratory needed for fuel testing for fuel addictive

Description:
USA or Asia FDA GMP Preclinical Laboratory needed for preclinical testing: nose filler - strontium hydroxyapatite 1. MTT assay on human epithelial fibroblast 2. in vivo testing on rabbit frontal sinus

Description:
Japan CMP PMDA certified pharmaceutical laboratory needed for Dissolution testing according to Japanese Pharmacopoeis poedure

Description:
British Columbia Pharmaceutical Laboratory needed for pharmaceutical testing: Timolol 0.5% eyedrops non-preserved Cyclosporin in corn oil Eyedrops Tetracaine 0.367% Aqueous eyedrops non- preserved Brimonidine Tartrate powder

Description:
US Materials laboratory needed for ASTM Testing of Natural Gas: Chemical composition analysis of natural gas used as a vehicle fuel for adherence to SAE J1616 Testing per, ASTM D 1142-90, ASTM D 1945-91, ASTM D 3588-91, ASTM D 4084-88, ASTM D 1945, ASTM D 2650, ASTM D 4084

Description:
Medical device manufacturer requires Canada or US Bioanalytical Laboratory for standardized, non-developmental testing methods for bioanalytical testing of bovine serum albumin powder for presence and concentration of total bovine IgG, IgG1 and IgG2, as well as fatty acids.

Description:
Europe environmental microbiology laboratory needed for water testing - microbiology testing

Description:
Physical laboratory needed or outgassing testing on Stainless steel samples. These material will be used on Vacuum application hence this test is required. Test requirement : Maximum Steady state outgassing rate shall be: less than 10-7 Pa.m3.S-1.m-2 This test shall be conducted under room temperature i.e., at 20°C

Description:
North America Cosmetics Laboratory needed for Cosmetics Finished Product Testing efficacy of a skin care product on its ability to protect cells from oxidative damage--either with an assay to measure oxidative stress or ORAC in the product

Description:
Startup hair growth manufacturer needs ISO microbiology laboratory needed for microbiology quality control testing. Need to evaluate to establish a batch control system for measure of sterility,toxicolity, expected shelf life, etc

Description:
Metallurgical laboratory needed for mineral analysis and metallurgical testing: gold, diamond or other mineralsfor rocks and dirt

Description:
Plastics Laboratory needed for physical testing: UV and moisture resistance testing on Black HDPE pails as well as 4 mil polyethylene bags.

Description:
sand that contains mineral ores, I ready to send you and pay the cost.

Description:
Clinical Laboratory needed for clinical skin testing: skin biopsy samples for collagen and elastin changes. The test result can be reported as positive or negative. Also please let me know the price of each test.

Description:
Environmental Laboratory needed for sand testing. Sand that was taken from an area where there was a fire a few years back. I ran an Organic Impurities test on it (ASTM C40) and it was very dark, high orgaincs. I am wondering if you run any tests on sand that could tell me what exactly are the impurirtie in this sand. Wondering if it is ash , carbon, etc.

Description:
Analytical Chemistry Laboratory needed for botanical testing: total alkaloids in two samples of liquid extract of Uncaria tomentosa

Description:
India Plastics Laboratory needed for plastics testing of Laminated plastic Films

Description:
Africa Environmental Laboratory needed for water testing: efficiency of water purification using moringa oleifera

Description:
Pharmaceutical Preclinical Laboratory needed for preclinical testing: tests three skin treatments to qualify for National Eczema Assn. Seal of Acceptance: 1. Repeated Insult Patch test 2. Cumulative Irritation Test 3. Photo Toxicity Test 4. Stability Test

Description:
Polymer Laboratory needed for UV and moisture resistance testing on Black HDPE pails as well as 4 mil polyethylene bags.

Description:
NEW JERSEY MATERIALS LABORATORY NEEDED FOR ASTM TESTING: SPECIFICATIONS OF LIMESTONE TILES (BUILDING MATERIALS)

Description:
Dietary Supplement Analytical chemistry laboratory needed for dietary supplement stability testing required on 2 supplements to determine the expiration date.

Description:
Quebec mechanical laboratory needed for IBC mechanical testing

Description:
US pharmaceutical analytical chemistry laboratory needed for impurity testing: degradant impurities in Opthalmic drug product testing

Description:
ISO, FDA GMP Pharmaceutical analytical chemistry laboratory needed for pharmaceutical maltodextrin testing to quantify two samples, one with maltodextrin, one with microcrystalline cellulose.

Description:
Canada or USA Food Laboratory needed for liqueur testing: Alcohol Testing for Alcoholic Strength (% alc.v/v) testing required for cream liqueur.

Description:
Analytical chemistry laboratory needed for freeze point testing on the following samples. - MEA, caustic soda , denatured ethanol, blend - MEA thiazine, methanol blend varying %'s As well I was wondering if you could test for chlorides and iron in 45% caustic soda solutions.

Description:
Physical Laboratory for composite testing: moisture diffusion in fibre reinforced compositesfatigue test,creep test,salt spray test,humidity test on the effect of moisture diffusion in fibre reinforced composites,S-N curve for fibre reinforced composites.

Description:
Large Multinational Consumer Products Laboratory needs contract microbiology laboratories around the globe able to provide total aerobic plate count, gram staining and speceis level identification.

Description:
India materials laboratory needed for ASMT Testing: Freezing point determination for glycol based coolant- 4 samples

Description:
Japan Pharmaceutical Laboratory needed for pharmaceutical testing: 1.Imaging capillary isoelectric focusing (cIEF) 2. Electrophoretic mobility

Description:
Large Pharma needs pharmaceutical laboratory for BS EN13405 pharmaceutical testing: Looking for a lab that has experience running British Standard Testing-BSEN13405

Description:
Europe, Japan, USA FDA GMP, ISO Biomedical laboratory needed for CE Marking and ISO testing of medical disposbles: disposable Respiratory function test, bacteria and Humidity Moisture Exchange(HME)filters. We want following parameters to be tested and certified. dead volume moisture output air resistance

Description:
India Plastics Materials Laboratory needed for plastics testing: 1 DOP (DI OCTYL PHTHALATE ) AS PER ATTACHED ANALYSIS REPORT - SPECIFIC GRAVATY - DENSITY - FLASH POINT - EVOPRATION POINT - FREEZING POINT SO CAN YOU PLEASE HELP IN THIS CASE ? AND ALSO DO YOU HAVE TEST FACILITY FOR LIQUID STABILIZER , TIO2 , PVC RESIN , LUBRICANT GMS , LUBRICANT 316a, AND CALCIUM UNCOATED ???? ...

Description:
US consumer product safety laboratory needed for allergy testing. Test biological samples (plant matter) for fragrance allergies specifically Methyl Eugenol, Safrole, and Estragole (as noted in the 7th Amendment to the European Cosmetic Directive)

Description:
Analytical Chemistry laboratory needed for synthetic lubricant testing. A contract laboratory that will run a pH test and not just the TAN/TBN tests on synthetic lubricant...but NOT Analysts Inc.

Description:
India agriculture laboratory needed for agriculture testing

Description:
North America Physical Laboratory needed for Burner Testing, CFM 1600F: Physical testing of steel tubes with chrome overlay, different steel substrates. Burner testing starting at 1600F and stepping down in temp per customer's test protocol. Test ~8 samples with testing complete by beg of Jan 2014

Description:
ISO certified laboratory to certify thermal properties of liquid thermal insulation coating. Thickness of coating is 1-6 mm, so it could be tested indirectly by comparison of coated and uncoated samples. Using difference in sample's thermal conductivness it is possible to calculate value of coating itself

Description:
Japan Toxicology Laboratory needed for Toxicology Testing: toxicological risk assessments (TRA)on chemical substances of toys or components of toys

Description:
Food nutritional Laboratory needed for nutritional testing: whey protein analysed for it's nutritional contents, and would like to know the cost.

Description:
India or China OECD GLP Laboratory needed for chemical OECD Testing

Description:
USA food Laboratory needed for e-juice production and possible packaging. This is a combination of PG/VG nicotine and flavorings to be used in e-cigarettes.

Description:
Asia food laboratory needed for flour testing: radioactive contamination testing in flour.

Description:
Europe or USA Materials Laboratory needed for polymer testing: comparative testing of radiopacity ASTM F640Comparative radiopacity to ASTM F640 testing of filled polymers. Specimens consist of injection molded Plastic plates approx 50mm x 80 mm with different wall sections. Possibly tube samples. 5 different materials. No special handling requirements. Samples could be cut.

Description:
Africa preclinical laboratory needed for preclinical testing: Medical Research-Nuclear Extracts and Serum samples. There would be need for ice pack

Description:
FDA Polymer Laboratory needed for FDA polesterterphthalate testing Migration fastness of PR 122 for polyesterterphthalate (PET) containers/bottles for food contact: Detection limit is 0.5ppb level from pigmented PET swatches

Description:
Asia consumer products laboratory needed for luggage testing to material Def Stan 81-41 / Stanag 4280 IP67, ATA300, Stanag4280: Luggage / Casing

Description:
Asia electrical laboratory needed for IEEE Testing: Electrical Heat cycle Test & IEC61238-1(2003-5) & Ageing Test & Tensile stress test

Description:
Asia electrical laboratory needed for CE Marking, IEEE Testing to Electrical IEC61238 Product = Voltage detector TestPen CAT IV 1000V.

Description:
NABL Materials Laboratory needed for ASTM Testing of Sulphur in organic liquid (Tri-n-butyl phoshate) by ASTM D5453 using sulphur flurescence

Description:
France food laboratory needed for nutritional testing: Qualitative analysis of the concentration of individual depeptide of the Collagen Drink Prodcut

Description:
Food bioanalytical laboratory needed for amino acid analysis: Amino acid profile of musk melon seeds by HPTLC method 100 gm of sample. type of product-seeds. Need specialized shipment or collection of sample.

Description:
India Food Laboratory needed for hard candy testing

Description:
Consumer Products OECD Laboratory needed for OECD Testing: degrability index of candelilla wax

Description:
FDA GMP Preclinical Laboratory needed for FDA Preclinical testing. Dental implants to be implanted in non-human primates in the mouth.

Description:
NABL Texas electrical laboratory needed for ASTM Testingof aluminum alloy composition to ASTM B233. Must be NABL accredited

Description:
Materials Certification Laboratory needed for ASTM Testing: Fire Retardant certification. ASTM on the Fire Retardment for a french textile,

Description:
MONTHLY LAB TESTING: Southwest USA laboratory needed for USAP and AOAC dietary supplement testing, primarily microbiology testinng and heavy metals testing. The dietary supplements in capsules (herbs, vitamins, minerals, other supplements). The supplements are all in dry powdered form. Certain products would be tested for certain things. The number of tests for a given product would range from 1-1 ...

Description:
Consumer Products Materials Laboratory needed for ASTM Testing to ASTM E2187-04, Standard Test Method fro Measuring the Ignintion Strength of Cigarettes.

Description:
US Bioanalytical laboratory needed for protein testing: osmolality of a protein solution by vapor pressure rather than freezing point depression because we don't trust our freezing point depression results.

Description:
Forensic Analytical Chemistry Laboratory needed for gasoline testing from gas tank tested to see what other ingredients ( I.E.Sugar,Sand,etc ) may or may not be present in the gasoline.

Description:
Zoo needs bioanalytical food laboratory for thiaminase testing in fish used a food for exotic animals

Description:
Analytical Chemistry Laboratory needed for plant oil extract testing: gas chromatography/mass spectrometry analysis of oil extracts from plant extracts. I will formulate fish feed with a known amount of active components from plant oil (e.g carvacrol, thymol, limonene). Only one active component of a known amount (e.g 300mg/kg of feed) will be incorporated into each fish feed. I am interested ...

Description:
India Food Laboratory needed for hard candy testing incuding stability studies

Description:
Large Consumer Products Mfg needs analytical chemistry laboratory for ISO Testing. Capable of runnign ISO 3704-SULFUR FOR INDUSTRIAL USE - DETERMINATION OF ACIDITY - TITRIMETRIC METHOD

Description:
FDA GLP, GMP and ICH Compliant Bioanalytical Laboratory needed for protein characterization HDX MS using at minimum a GLP or qualified level of assay.

Description:
Europe Laboratory needed for collagen protein drink testing for: Molecular weight distrubution of collagen peptides in the drink product Method: Measurement of molecular weight distribution of pepetide and determie the % of dipepdite, tripeptide, polypeptide in drinks product

Description:
Microbiology laboratory needed for microbiology testing: D-value determination of the spore samples for steam sterilization. Geobacillus stearothermophilus spore strips Gebbacillus stearothermophilus spore ampoules

Description:
Oil Laboratory needed for two tests: ASTM Testing of Unsulfonated Residue of Petroleum Plant Spray Oils (ASTM D483). The second is a Sequence II foam test (ASTM D892), modified to use propane gas instead of air.

Description:
Bioanalytical Laboratory needed for Biopharmaceutical Testing on Fetal Bovine Serum Testing on FBS for: Achromobacter Bovine IgG Growth Performance What sample size to run all three tests What is the cost of each test

Description:
Canada Food Laboratory needed for food microbiology testing on cheese.

Description:
USA FDA GMP Analytical chemistry laboratory needed for GMP Purity testing: NMR testing on pharmaceutical product

Description:
Mechanical Laboratory needed for FMVSS 106 Certification Testing: FMVSS Testing of Hydraulic brake hose certification as per FMVSS 106,Brake Hoses

Description:
USA clinical laboratory needed for HIV plasma testing: detect virus in human plasma using TEM Need to visualize HIV particles in human plasma using TEM to correlate with viral load measurements. Must detect HIV by size and morphology only. Have successfully used TEM to detect two different clones of HIV added to plasma at concentrations of 1 million particles/ml and above. Must be able to detect v ...

Description:
Agriculture India Laboratory needed for quality testing: Soybean testing of soyabean for export from India to Middle east.

Description:
Toxicology Laboratory needed for toxicology testing of Pyrethrum flour 1.2%

Description:
Food filling manufacturer with new filling technique needs food microbiology laboratory for microbiology testing and inoculation: inoculate and transport a series of PET and HDPE bottles with both a bacteria and a mold to the Boston area. Please let me know if you think this is something your company might be able to assist us with as we are hoping to get a quote as soon as possible.

Description:
USA EPA Environmental Toxicology Laboratory needed for EPA Toxicity Testing: Chronic Whole Effluent Toxicity Monitoring Requirements: The Water Quality Standards of Mississippi require that all waters be free from substances in concentrations or combinations which are harmful to human, animals, or aquatic life (State of Mississippi, Water Quality Criteria for intrastate and Coastal Waters, Sectio ...

Description:
FDA GMP Bioanalytical Laboratory needed for FDA tissue protein testing using Validated Quantitative Western Blot for mammlian tissue proteins

Description:
India NABL Occupational Health and Industrial Hygiene Laboratory needed for OSHA Testing. Chemical Testing of Trichloroethylene [OSHA 07] Acetone [OSHA 07] Butyl acetate [OSHA 07] Isopropyl Alcohol [OSHA 07] Hydrocarbon: IS 5782

Description:
Canada or USA Polymer Laboratory needed for plastics testing: PET testing for 1. Measuring melt flow index of PET samples 2. Molecular weight evaluation of PET samples using size exclusion chromatography 3. Thermo gravimetric analysis (TGA) on PET samples with analysis of the gaseous products

Description:
Food Laboratory needed for nutritional testing for nutritional content of: tef (a grain from N. Ethiopia) Injera (a fermented flat pancake bread, made with tef and other grains) boiled grains (exact grain to be determined) Testing needs to be complete by mid Jan.

Description:
Europe Materials Laboratory needed for Construction Products & Building Materials Testing

Description:
FDA GMP Bioanalytical laboratory needed for FDA GMP tissue testing: Analysis of freshly frozen tissue biopsy material to evaluate transgene protein expression in a quantitative fashion. quantitative fluorescence microscopy and image analysis

Description:
Biotechnology Company needs Europe FDA GMP Bioanalytical laboratory for Vaccine testing, older methods, pH, Id, ICP-OES, Saccharide content, Free Saccharide, protein, particle size (Kd),

Description:
Consumer Products Laboratory needed for Consumer Product Safety Testing for a household/hardware (doorstop) item. Will provide 2-3 samples. Will ship.

Description:
Accredited Plastics Laboratory needed for PET Testing for intrinsic viscosity of the preform PET. Please let me know whether the method of study is accredited; it is essential eventual report would come from an accredited laboratory. We would like to examine 7 samples taken from 5 preforms and two ready bottles.

Description:
Textiles Laboratory needed for textile flammability testing of fabric for Chinese B1 Flammability standard.

Description:
South Africa genetics laboratory needed for algae genetics testing: Cloning and gene expression of algae. 2 algal samples

Description:
Polymer Laboratory needed for ASTM Testing. Polyethylene plastic testing for water vapour permeability of polyethylene plastic sheets , directional reflectance and luminous Transmittance ASTM E96, ASTM E1347, ASTM D 2103

Description:
Food Laboratory needed for ORGANIC FOOD testing 1. Pesticides 2. Aflatoxin Total 3. Heavy Metals 4. GMO

Description:
US FDA GMP Food Laboratory needed for pesticide testing: Juice testing of apple and pear juice concentrate by FDA accredited laboratory in order to perform pesticides analyses. Where can a I find a list of accredited laboratories? Thanks

Description:
Canada Agriculture environmental laboratory needed for soil testing of agricultural soil sample tested for an Oats crop in the spring. How long does it take to get results and what is the cost? Thank you

Description:
Analytical Chemistry laboratory needed for mineral testing of mineral ball

Description:
India Polymer Laboratory needed fro uPVC Testing: Certification Testing for uPVC certificates (Pipe 160mm dia, class 5) for advanced vision company-airport project

Description:
India cosmetics laboratory needed for laboratory cosmetics chemical testing

Description:
Asia Food Laboratory needed for food testing: laboratory food spice analysis of oxalic acid in food products (specifically powdered turmeric Organic Acid Profiling test. Can you also quote us the price per analysis. Thank you very much.

Description:
Materials Laboratory needed for Raw Material Testing: ASTM Testing. Activated Carbon Testing to ASTM, NFX 15-211, BS7989 Activated carbon efficiency to certain chemicals and research improvements. Needs to test some procedures as required by Afnor and BS standards. We might need to test the activated carbon sample with about 50 different types of chemicals.

Description:
Polymer laboratory needed for ASTM Testing: Polymer testing of the Liquid Oxygen Compatibilty in a polymer (PTFE)to ASTM D2512 (LOX Mechanical Impact Test)ASTM D4809 (Heat Combustionb TEST) .

Description:
Enviromental Microbiology Laboratory needed for biodegradability testing of laundry detergents for biodegradability and presence of phosphates under eu regulation 648/2004 and detergent regulation 259/2012. Thank you Regards Alan Brennan

Description:
India consumer products laboratory needed for BIS Certification Testing To test UV water purifier unit as per IS 14724 & 10910 for all Physical, Chemical & Microbiological parameters for ISI certification. online UV based Water Purifier under the brand Name Watershield Versatile. Watershield Versatile is 4 stage purifier: 1st Stage Compact, Antibacterial, Sediment Removal Cartridge for rem ...

Description:
Pharmaceutical Analytical Chemistry Laboratory needed for Quality Control / Quality Assurance QA testing of Medicinal marihuana of dried product tested for bacteria, moulds, yeast, alfatoxins, heavy metals, CBD levels and THC levels.

Description:
Pharmaceutical FDA GMP Analytical Chemistry Laboratory needed for pharmaceutical testing for PCB's, dioxane and flame retardants

Description:
Middle East, Asia Mechanical Laboratory needed for automotive parts testing to 6311:2005 -MOTOR VEHICLES METHODS OF TESTING BRAKE LININGS - PART 1: INTERNAL SHEAR STRENGTH OF LINING MATERIAL ISO 6312:2007-Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies ISO 6313:2007-Road vehicles - Brake linings - Effects of heat on d ...

Description:
USA CRO, Preclinical Laboratory for preclinical pharmaceutical compound testing Non-clinical study in vitro testing. Compounds testing in human macrophage/neutrophil/lymphocytes cell lines cultures for chemokines/cytokines secretions and or gene expressions

Description:
Northeast US Laboratory needed for process development of process variables for AlCl3 alkylation, sulfonation of alkylbenzene, MgOH2 decomposition reaction."

Description:
Arizona metallurgical laboratory needed for zeolite testing: Mineral analysis of Zeolite for Clinoptilolite, smectite, feldspar, etc

Description:
Southwest Canada microbiology laboratory needed for microbiology testing on dried medicinal marijuana: Total arerobic microbial countTotal combined yeast and moulds countBile - tolerant gram negative bacteriaEscherichia coliSalmonellaAlfatoxinsHeavy metalsTHCCBDpest control residueHealth Canada suggests the European Pharmacopeia

Description:
European Union, Canada or USA FDA GMP bioanalytical laboratory for GMP Heparin testing. GMP Analysis of two Heparin injection drug product using NMR

Description:
Asia metallurgical laboratory needed for metallurgical testing: cooper testing for copper ore inspection Copper Ore(Cu:10%+-) If you can, could you please inform me the following questions? -How long can I take the report? (better can get in 1 day) -How much it cost? -Need to make an appointment before we go(about 2nd on december)? Looking forward to your early reply.

Description:
Asia laboratory needed seawater immersion testing corrosion tests for various materials (resins and metals) and for composite modules of offshore locations

Description:
India Automotive Laboratory needed for automotive Part & Testing: 1. Diesel fuel and petrol filters for IC engines - Filtration efficiency using particle counting and contaminant retention capacity 2. Diesel engines - Fuel filters - Method for evaluating fuel/water separation efficiency

Description:
India Physical Laboratory needed for International Institute of Welding IIW testing of weld joints Requirement is for the Academic research.

Description:
Materials Laboratory needed for ASTM testing to ASTM D 3704, Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

Description:
Physical Laboratory needed for NORSOK Testing: Physical testing for elastomeric materials Ageing (sour fluid exposures) to NORSOK M-710, Qualification of non-metallic sealing materials and manufacturers RGD resistance

Description:
Pharmaceutical analytical chemistry laboratory needed for adsorption testing: Silica testing for Adsorption Capacity for Getterpak (Silica). As per MFG. COA, the adsorption capacity is done using Carbon Tetrachloride. I do not have any more information apart from this and the specification is more than 40%

Description:
Analytical Chemistry Laboratory needed for Petroleum Testing: Gas Chromatography GC analysis of petroleum for PAHs (polycyclic aromatic hydrocarbons) in petroleum.

Description:
Consumer Products Laboratory needed for NF Certification Testing: toilet testing for nf certification for france

Description:
FDA GMP pharmaceutical laboratory needed for GMP water testing - GPC

Description:
Food analytical chemical laboratory needed for rice testing for pesticide residue

Description:
Pharmaceutical Laboratory needed for polymorphism testing. Analytical Laboratory that can analyze samples for Polymorphism by X Ray Diffraction technique for clopidogrel bisulfate which is a pharmaceutical active ingredient. We have samples for this testing. If you have this capability, please let me know the lead time and price per sample. Also, please advise whether this testing is under GLP env ...

Description:
Canada Materials Laboratory needed for Materials Testing: Coating testing of 2 different coatings at 3 different moments in time with either GPC/SEC/GFC Light Scattering Coupling GPC/SEC/GFC Viscometry Coupling. I would like information on the dispersity of the samples.

Description:
Mexico Microbiology Laboratory needed for USP Endotoxin Testing for Endotoxins to USP 85

Description:
Food Laboratory needed for food analytical chemistry testing: Carbon Back Testing for PAH residues in carbon black?

Description:
US analytical chemistry laboratory needed for chemical testing of cannabidiol ester, 20 grams for research purpose. The cannabidiol ester produced must be of food grade or can be used in food products. We will supply the cannabidiol, you just need to commission the reaction and purify the resulting ester.

Description:
Pharmaceutical company needs FDA GMP California bioanalytical laboratory for FDA Testing: Residual protein testing in rinse water from equipment cleaning.

Description:
Middle East Microbiology Laboratory needed for microbiology testing: Limulus Amebocyte Lysate (LAL) Testing, Endotoxin Testing on sterilization equipment surfaces and surgery instruments

Description:
South Africa food laboratory needed for deformulation food testign (composed of potato and corn) from North America and apply the technology in our African market.

Description:
California Laboratory needed for physical testing on asphalted Kraft paper (building product)samples, 3 different basis weights on the following: DRY TENSILE STRENGTH (ASTMD828) WATER VAPOR TRANSMISSION (ASTME96 Desiccant method at 74.3) WATER RESISTANCE (ASTMD779) *ALL PER REFERENCE AC38 SECTION 3.1 & TABLE 2 acceptable to ICC-ES

Description:
Food Laboratory needed for food analytical chemistry testing: pesticide testing in rice

Description:
Accredited Food Laboratory needed for proficiency testing: Food pesticide testing screening for pesticides in fruits, vegetable and meats

Description:
Materials Laboratory needed for ASTM Testing to ASTM 3539 Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer run on 4 White Mineral Oil samples and to be measured against Butylacetae as stated in the method. All can be shipped with no specialized shipping.

Description:
India Government approved Laboratory needed for electrical testing of Electrical Insulated Mat material (CONFIRMING to IS 15652:2006).

Description:
Middle East Electrical laboratory needed for IEC Testing of different types of Lamps Luminaries in accordance with IEC standards

Description:
Materials Laboratory needed for materials testing. ASTM Testing to ASTM D3704, Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

Description:
EPA GLP, USA Environmental Toxicology Laboratory needed for EPA GLP Pesticide Testing: Antimicrobial pesticide for EPA testingEnvironmental fate - Hydrolysis, Photodegradation, Activated Sludge/Respiration Inhibition. Nontarget Organisms and Plants - Acute avian oral tox, acute freshwater fish tox, acute freshwater invertebrates, Aquatic plant growth (algal)

Description:
Large food manufacturer needs Food analytical chemistry needed for food nutritional testing. Bean testing for Lectin, Phytic Acid or Phytate. What is the method used and the cost. Samples provided will be dry beans or canned beans in sauce/brine

Description:
Polymer Laboratory needed for polymer testing: Chromatography Testing to determine the Molecular weight Distribution of PET polymer, 2 samples,

Description:
India NABL Laboratory needed for Dye penetration testing as per IS-3658 -1999 CL7, Code of practice for liquid penetrant flaw detection

Description:
Middle East Oil Laboratory needed for oil testing via mobile laboratory of the company up to us via one of the import and export companies

Description:
INDIA BIOCHEMISTRY LABORATORY NEEDED FOR ENDOCRINE TESTING: FISH(CYPRINUS CARPIO) HORMONAL TESTING

Description:
E-liquids for e-cigarette producer needs US analytical chemistry laboratory for contamination testing such as TSNAs, PAHs, Diacetyl, Acetyl Propionyl, Acetoin, Sugar, Gluten, and GMOs. I would also like to know the nicotine concentration. Is that something you are capable of doing, and if so what would the cost of these tests be? My samples are in liquid form in a propylene glycol and vegetable ...

Description:
Pharmaceutical Laboratory needed for deionized water testing: TOC analysis for PQ of Water purification system. Speciificaation 10ppb or less Total samples - 13 (1 control sample and 12 samples over 4 weeks) deionized water samples, need special TOC collection containers and shipped for next day TOC analysis

Description:
Mechanical Laboratory needed for engine emission testing: exhaust emission tests on two cars one Petrol and one diesel.

Description:
Consumer Products Analytical Chemistry Laboratory needed for flouride testing of powder fluoride sample: OPTICAL & percentage elemental (ASSAY)analysis of fluoride samples. If it is possible then please let me know.

Description:
Large Toy Manufacturer needs Toxicology Laboratory for Toy Testing: Toxicology Testing Toxicological Risk Assessment (TRA) Based on the ingredients or bill of substances to evaluate or assess any hazardous substances involved on the materials. The requirement should be referenced to EU REACH,SVHC,2009/48/EC, Washington Children's Safe Product Act or California Green Chemistry Act, etc.

Description:
FDA LABORATORY NEEDED for Consumer Product FDA testing of shipment that is on hold by the FDA at the moment and need to get a lab to test it before it can be released.

Description:
California Laboratory needed for All clinical laboratory testing for a mobile phlebotomy startup. ALL clinical lab testing from ABG, stool, wound cultures to all blood tests available for doctors

Description:
Genetics Laboratory needed for human genetics testing of Human sample for chromosomal aberrations by induction of DNA strand breaks by production of ROS or inhibition of topoisomerase II. Require testing for chromosome damage in peripheral lymphocytes and the number of mitochondria in these cells. Chromosome Painting Personal analysis.

Description:
Electrical Laboratory needed for IEEE electrical Testing: electric arc erosion rate in low voltage circuit breakers arc erosion rate for low voltage and current ranging from 100-1000A

Description:
Western USA physical laboratory needed for concrete testing: Compressive strength of concrete before and after exposure to 500 F, 700 F, 900 F (to be determined). Laboratory must have Furnace that can accomodate standard core samples, 6 inch diameter by 18 inch tall

Description:
Cosmetics Company needs cosmetics analytical chemistry laboratory for shampoo testing: test and quantify cocoamide dea in shampoo products.

Description:
FDA GMP California laboratory (preferably in the Bay Area, CA) needed for FDA GMP storage of FDA GMP pharmaceuticals. Several different storage conditions from room temperature to freezer.

Description:
Large Environmental Company needs environmental analytical chemistry laboratory for chemical testing: ASTM solvent testing to ASTM E299 Peroxides in organic solvents

Description:
Canada pharmaceutical laboratory needed for medical marijuana testing: specific test requirements, but these are a fewheavy metals, Aflatoxins, microbiological purity, pesticides, moisture content, Potency THC CBD, chemical identity...cannabinoids profile Need testing of medical marijuana, normally one or two samples, every week.

Description:
Philadelphia Area Food Laboratory needed for fish oil testing: assay for fish oil purity 5 samples of fish oil units

Description:
Canada Natural history museum needs Canada Laboratory for specimen testing of animal samples (birds, mammals, amphibians, reptiles) before making them museum skins and pickled specimens. All specimens are from window kills or road kill. If a business was looking to do broad species sampling of Lyme Disease's Borrelia bacteria, H1N1, or West Nile. , I will be running through 100's of specimens. Eli ...

Description:
Middle East Manufacturer needs polymer laboratory for ASTM Testing: PVC Tests for mechanical and chemical testing on material of uPVC pipe,according to ASTM D 1785-D 1784 and related fabrication standards. Pipe is class 5 , schedule 80 ,Pipe diameter size is 150mm ,6 inches and (40cm length). Please provide to us the required tests and your quotation asap.

Description:
Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6099 Part1 , BS 6099 Part 2, section 2.2, BS 4607-1 and BS 4607-5 which incluled following: 1- Dimensions and Visual Inspection 2- Bending Test 3- Compression Test 4- Impact Test 5- Collapse Test 6- Resistannce to Heat 7- Resistance to Burning 8- Elec ...

Description:
Bioanalytical Laboratory needed for blood testing: H. Pylori and EBV testing on subject prior to accepting blood samples from them.

Description:
FDA GMP Pharmaceutical laboratory needed for USP monograph testing of triclosan under full GMP compliance."

Description:
Biomaterials Laboratory needed for ASTM Testing: compatibility of non lubricated latex , poliurethane and polyisoprene condoms with a lubricant to ASTM D7661-10 : Standard test method for determining compatibility of personal lubricants with natural rubber latex condoms

Description:
Europe laboratories needed for building testing

Description:
Consumer Product Laboratory needed for consumer products safety testing of car seat protector product. Car Seat protector slides under the car seat and attaches to the front seat.

Description:
India NABL Laboratory needed for analytical chemistry testing: Mass spectrum analysis and NMR analysis for inhouse reference standard pharmaceutical substance preparation.

Description:
Materials Laboratory needed for ASTM Testing to ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials ASTM C518, Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ASTM C739, Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation ASTM C687,Standard Practice for Determination of Ther ...

Description:
Polymer Laboratory needed for polypropylene testing of polypropylene resin two times per year for test results on melt flow and yellow index. We are looking to verify the test results given to us by our suppliers on their certifications.

Description:
Toxicology Laboratory needed for toxicity testing of antibacterial product

Description:
FDA GMP Clinical Bioanalytical laboratory needed for GMP blood testing: Blood General: Blood Count, Transaminase, Gamma GT, Glycemia, Creatinine, Azotemia, Cholesterol, Triglycerid, Bilirubin, LH, Testosterone. Urine Drug Screen: Opiate, Cocaine metabolitem Cannabinoid, Amphetamine, Metadone, MDMA, Urine Creatinine. Biological Monitoring of Solvent: Methanol, Dichloromethane, Acetone, Toluen ...

Description:
Pharmaceutical Laboratory needed for aspirin testing: laboratory analysis for the following? 7 Common anti inflamatory drugs / analgesics Aspirin Diclofenac Ibuprofen Acetaminophen Metamizol Indometacine Naproxen Number of samples: 7 samples * 3 batches = 21 total samples i am requesting for a quotation to test the presence of the above mentioned 7 common anti inflammatory drugs in surface water s ...

Description:
Analytical chemistry laboratory needed for staibility testing: shelf life stability testing

Description:
India analytical chemistry laboratory needed for perfume testing: stability of colors of perfumes and solid perfumes

Description:
Independent, accredited Plastics Laboratory needed for plastics testing: failure analysis of sealant material for failure on site that might be structural silicone, weathering silicone or polyurethane. We are looking for the following: Confirmation of the material itself. Any analysis of deterioration if it can be compared to a fresh sample.

Description:
UK Laboratory needed. Polymer Laboratory needed for Specific Melt Resistivity Testing of polyester film chips to define its conductivity level."

Description:
India Food Laboratory needed for food analytical chemistry fatty acid testing: analyse GC/MS for my product. Its fatty acid compound. "

Description:
Analytical Chemistry Laboratory needed for chemical analysis of unlabeled bag of powder claimed to be Cerium Oxide to be used as a polishing agent. Can you verify this?

Description:
Accredited Polymer laboratory needed for plastic testing of plastic pellets. Gas chromatography testing on a number of extruded tubes and resin granules. The granules/ tubing are essentially PVC with a number of plasticizers to increase their flexibility for content of DEHP, DEHA and DEHT in the tubing and or granules provided. Please advise regarding turnaround times, costs, limits of det ...

Description:
Electrical Laboratory needed for IS Testing and IEC Testing of Electrical Grade Insulating kraft Paper

Description:
FDA GMP Microbiology laboratory needed for Microbiology testing to FDA Guidance: endotoxin testing. Testing whether a product increases the production of S. Aureus Endotoxin 1 (often referred to as 'toxic shock syndrome toxin 1').

Description:
California bioanalytical chemistry laboratory needed for protein testing: Circular Dichroism of a Protein Sample 2-3 samples for now.

Description:
Materials Laboratory needed for mechanical testing: Average Bending Strength - AS/NZS2908.2- Density (oven dry) - AS/NZS2908.2- Watertightiness - AS/NZS2908.2- Water Absorption - ASTM C1186- Moisture Content - ASTM C1186- Dimensional Conformance - AS/NZS2908.2- Warm Water Resistance - AS/NZS2908.2- Freeze-Thaw Resistance - AS/NZS2908.2- Soak-Dry - AS/NZS2908.2- Average Specific Extinction Area - A ...

Description:
Analytical Chemistry Laboratory needed for paper fiber testing: fibre, silica, methanol content and viscosity in weak black liquor.

Description:
Food analytical chemistry laboratory needed for integrity and identification testing: oil testing of batch of crude Sunflower oil and kernel apricot oil. In which case we shall ask for both samples to be tested for integrity.

Description:
Microbiology laboratory needed for microbiology testing: Microbial Growth testing on several glass grinding coolants to ASTM E2275 Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance

Description:
Biomechanical laboratory needed for USP Testing: Biomaterial testing for properties of bio materials for sutures mechanical and biological tests as per USP standards for needles and sutures [knot pull, tensile stregth, straight pull, needle attachment, strength retention studies, penetration force, cross section, anti microbial coating test efficiency, throw test, elasticity] will provide samples ...

Description:
Quarterly testing. Northeast analytical chemistry laboratory needed for Ammonium Hydroxide testing (Aqua Ammonia 21 BE) to determine if it is reagent grade material. This would be quarterly testing and including the following: 1. Residue after Ignition (0.002% max) 2. Carbon Dioxide (0.002% max) 3. Chloride (0.5 ppm max) 4. Phosphate (2.0 ppm max) 5. Total Sulfur (as SO4) (2.0 ppm max) 6 ...

Description:
Southern California materials laboratory needed for film characterization testing of several silicon wafers with different films on the surface. We would like to characterize these films.

Description:
Analytical Chemistry Laboratory needed for Gas analysis of unknown sample possibly containing four components- Helium, Argon and two unknowns.

Description:
Research and Development Organization needs materials environmental laboratory for rock testing and soil testing. Need to test several rock and soil samples for composition.

Description:
Large multinational corporation needs microbiology laboratory for water testing.

Description:
Brazilian or Latin America Laboratory needed for ASTM Testing to ASTM F2298 - 03(2009)e1 ,Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell

Description:
Ontario bioanalytical laboratory needed for drug residue testing in horsemeat for performance enhancing drugs, antibiotics or other meds?

Description:
Florida consumer products laboratory needed for carcinogen testing of fabric bed: headboard and bedframe for carcinogens (TDCPP)

Description:
Materials Laboratory needed for analytical chemistry testing: XPS analysis (survey spectrum and high resolution spectra, quantification of elements) of powder material

Description:
Pharmaceutical laboratory needed for pharameutical testing of clerodendrum sp. ,tecomellasp.,rubia sp.,embelia sp.

Description:
Consumer Products Laboratory needed for hair extension identification testing to determine composition of human vs. synthetic hair I hair extensions

Description:
India Pharmaceutical analytical chemistry laboratory needed for phytochemistry testing: macroscopically microscopically fluroscence analysis phytochemistry etc it aunthenify its species or differntiate species

Description:
Materials Laboratory needed for rubber testing large quantity of samples of rubber available. We simply need to find out the composition of the rubber we are working with (i.e. is it EPDM, Acm, ect.) We can ship all samples

Description:
Analytical Chemistry Laboratory needed for heavy metal testing

Description:
Toronto importer needs Consumer Products Laboratory for diaper testing for safety chemical composition, etc.

Description:
Canada mechanical laboratory needed for Mechanical life testing: Gearbox oil testing to test the life of the gearbox.

Description:
FDA GMP North Carolina preclinical CRO, contract research organization needed for FDA preclinical study: ELISA testing for tissue levels of Avastin and Lucentis monoclonal antibodies. 100 samples

Description:
Canada or US ISO Laboratory needed. ISO/IEC 17025:2005 accredited analytical chemistry laboratory needd for VOC testing in consumer products by CARB method 310.

Description:
Food Laboratory needed for Food AACC Testing and AOAC Testing: Texture analysis for biscuit samples

Description:
test some of our products such as dishwashing liquid, shampoo and industrial cleaner and Consumer Products Laboratory needed for efficacy testing, microbiology testing and physical testing of degreaser for cleaning efficacy, physical properties such as pH, viscosity, etc., microbiology and stability.

Description:
Biotechnology company needs India materials laboratory for surface area testing: test-specific surface area by BET. Pl. suggest the laboratories in india or near to our navi

Description:
Polymer Laboratory needed for ASTM Testing: Electrical conductivity testing of some polymer composites to be tested to ASTM D 257 (Electrical conductivity or surface resisitivity of polymer composites) the range is 10-2 to 10-17 S/cm the range is 10-2 to 10-17 S/cm

Description:
India ISO Laboratory needed for ISO Testing: Fatty acid testing for composition of oil

Description:
Mechanical Laboratory needed for DIN testing for Shore A Hardness Testing to DIN 53505, Testing of rubber - Shore A and Shore D hardness test

Description:
OECD GLP Bioaalytical Preclinical Laboratory needed for pharmaceutical preclinical plasma testing: Analysis of , B2M, neopterin, 2'5'-OAS and ADA, biosimilar INF-alfa in blood plasma samples (human and animal samples). Validation according EMA guidelines.

Description:
Microbiology Laboratory needed for Bioburden testing. What is the cost? What is the timeframe for the results? We will need to test 30-50 samples of 15ml products per month

Description:
Engineering laboratory needed with a Physical engineer for physical testing to assess a Self Retracting Lifeline performance and failure limits. We will also require a forensic analysis of a failed Self Retracting Lifeline.

Description:
FDA GMP Europe pharmaceutical laboratory needed for analytical chemistry testing: moisture content by TGA ICPMS for Tin and heavy metals. we have methods for testing

Description:
Microbiology Laboratory needed for microbiology testing: environmental conditions and test procedures for airbone equipment-section 13 : Fungus Resistannce to RTCA-DO 160 G, Environmental Conditions and Test Procedures for Airborne Equipment

Description:
US Bioanalytical Laboratory needed: flow cytometry laboratory needed to conduct VASP platelet aggregation testing in the US.

Description:
Consumer Products analytical chemistry laboratory needed for chemical testing of Surfactants; structured liquid verification using polarized light microscopy and high resolution color images. Need good images for technical bulletins.

Description:
Canada Laboratory needed. Pharmaceutical Microbiology Laboratory needed for USP Microbiology Testing to USP 51 (anti microbial) Skin and eye irritation tests

Description:
FDA GMP Food Laboratory needed for food contact testing to FDA CFR 175.3 Resinous and polymeric coating testing that may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, in accordance with CFR 175.3

Description:
Asia electrical laboratory needed for IEC Testing: Determination of the halogen acid gas content in GRP/FRP(Fiberglass Reinfored Plastic) to IEC 60754-1

Description:
INDIA NABL LABORATORY NEEDED FOR MATERIALS TESTING: METALLURGICAL TESTING, HARDNESS TESTING DONE THROUGH NABL IS METALLURGICAL VALID PFOR THE SAME.

Description:
Food Laboratory needed for cake ingredient testing.

Description:
Europe Laboratory needed for geophysical testig for Polished stone value

Description:
USA analytical chemistry laboratory needed for USP Testing: Pesticided Testing to USP/EP Pesticide Residues in Botanical extract Test a GMP sample as per USP and EP for pesticide residues

Description:
ISO certified and ISO accredited Food Laboratory needed for water testing and food testing on water,food samples from different coutries such as england, bermuda, etcsamples will be shipped and results-report within 2 days should be provided via web-internet

Description:
Food Laboratory needed for rice testing: filth analysis o rice.

Description:
Microbiology Laboratory needed for anti-microbial testing of cold sterilizing solution by Immersion of medical equipment, formulated with glutaraldehyde to need to evaluate its antimicrobial properties, with elimination trials, especially bacterial spores, mycobacteria and viruses, with some international standards (ASTM, AOAC, EPA Test,). Initially i do the consultation about in wich laboratory ...

Description:
Canada or US Mechanical Laboratory needed for ANSI Testing mechanical testing fo Mechanical Pressure and Temperature Testing testing the sealing in a process connection for a transmitter that we are currently developing. This is a dual seal connection and we want to test it to the Dual Seal test outlined in ANSI/ISA-12.27.01-2011. Do you have the facilities to do this and if you do how much wil ...

Description:
Food Laboratory needed for cheese testing: analysis of Lysozyme on cheeses.

Description:
USA envirnomental laboratory needed for ASTM Testing of Organic Solvent to ASTM E299-08, Standard Test Method for Trace Amounts of Peroxides In Organic Solvents

Description:
Asia Medical Device Laboratory needed for ASTM Testing, ISO Testing, medical device testingto quantify the Stethoscope (medical device performance)- Sound Amplification and attenuation e.g. Frequency, Loudness(Decibel)

Description:
USA materials laboratory needed for ASTM Testing of adhesive (staking) material that uses the following materials: Conathane Monsanyo PC 1344 Cab-O-Sil M5 (I have stock on this material) Conap 1803 Formula is proprietary and requires NDA."

Description:
NABL Mechanical Laboratory needed for GI wire testing of G.I Wire 4mm

Description:
UK cosmetic analytical chemistry laboratory needed for formulation testing of shower gel that contains nno harsh chemicals.

Description:
Asia laboratory needed for ASTM Testing. Silica Testing to ASTM C35Partikel Size Distribution -> ASTM E276 Number Of sampel : 1

Description:
Electrical laboratory needed for bending endurance testing on test cable under varying temperature conditions. Following this a voltage test on the insulation needs to be conducted.( A full description of the test and cable will be provided to Labs who can do this kind of testing.)

Description:
USA Biophysical Laboratory needed for ASTM Testing to ASTM F 2392-04 Standard Test for Burst Pressure Strength of Surgical Sealants.Need to evaluate surgical selants strength using the ASTM F 2392-04 Standard Test Method for Burst Pressure Strength of Surgical Sealants.

Description:
San Diego FDA GMP analytical laboratory needed for FDA Testing: FDA GMP Sulfite Testing.

Description:
Middle East Clinical Laboratory needed for plasma protein testing ( Plasma )

Description:
US Plastics Laboratory needed for plastic ASTM Testing. A full package of information for HDPE material including: 1.Stress-Strain data for (tensile, compression, shear) 2.Strain rate sensitivity parameters identification 3.The graph of strains in lateral and longitudinal directions

Description:
Asia company needs France geochemical laboratory for rock identification.

Description:
India Food Laboratory needed for food testing: Saponification Value, Iodine value, unsaponifiable matter, Acid Value Moisture, Orizanol differentiated by sterol, Vitamin E Tocopherols, if possible differentiated by type Tocotrienols and differentiated by type sterols if possible differentiated by type Total phytosterols (including beta sitosterol; campesterol; stigmasterol) Fatty acid profil ...

Description:
Middle East Food Laboratory needed for nutritional testing. Test for Nutrition Facts

Description:
Analytical Chemistry laboratory needed for biomass testing: ultimate & proximate analysis and TGA Thermo gravimetric analysis Environmental Laboratory needed for ASTM Testing analysis of biomass.

Description:
Plastics Laboratory needed for carbon black testing for amount of carbon black in rubber hose.

Description:
Food Laboratory needed for antibiotic testing in raw meat samples for the presence antibiotics

Description:
NABL India Laboratory needed for paint testing to conduct inter lab comparison for Paint testing for nabl requirement

Description:
Pharmaceutical analytical chemistry laboratory needed for MHRA docusate sodium testing: Analysis of Docusate sodium Ph.Eur RS analysis Related substances of Docusate sodium

Description:
India geology laboratory needed for stone testing: polished stone value test

Description:
Asia analytical chemistry laboratory needed for flash point testing: Thinner flash point for MSDS

Description:
Certified Toy Laboratory, Consumer Safety Laboratory needed toy testing center that is certified to test baby toys

Description:
India Physical Laboratory needed for destructive welding testing

Description:
Certification Laboratory needed for graphite testing of raw graphite material in Malaysia. Can you please advice for laboratory and certification grade for our raw graphite material.

Description:
Preclinical Laboratory needed for non-GLP preclinical studies: in vitro testing and in vivo testing (rodents only) cancer, autoimmune, inflammation

Description:
South Africa analytical chemistry laboratory needed for Ingredient testing/verification, qualitative/semi-quantitative(based on absorbion peak values), for 5 ingredient nutritional supplement : C0-Q10, Resveratrol, Green Tea Extract, Pine Bark Extract, and Grape Seed Extract. Excipients, if any to be noted as well.

Description:
FDA GLP Microbiology Laboratory needed for EN pharmaceutical testing 1 product 1 time point for each of the following methods: EN 13727, EN 13624, Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectantsEN 13704, EN 14348, EN 14476

Description:
Asia Mining Laboratory needed for ASTM testing of Fe

Description:
California Clinical Laboratory needed for clinical testing: Blood Testing for Blood circulation and lactic acid level

Description:
Plastics Laboratory needed for ASTM Testing : Polypropylene resin testing to ASTM D1238,Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer , melt flow rate, melt index, volume flow rate ASTM D6290, Standard Test Method for Color Determination of Plastic Pellets. from lots to compare to supplier information Polypropylene resin, 1 lb. samples to verify melt flow and ...

Description:
LONG TERM CONTRACT: Hong Kong gold mining company needs Asia metallurgical laboratory for metallurgical gold testing: composition test gold nuggets of over 90% concentration. The services contract shall be covering 8 testing services a month in 3 consecutive years.

Description:
Materials Laboratory needed for BS / IEC Testing: electrical breakdown strength test in accordance with British Standards Specification: BS 5874, Method for determination of the electric strength of insulating oils to investigate how the electrical breakdown strength of oil is affected by solvent impregnated wet wipe fibres.

Description:
safety gloves to International Safety Equipment Association Standards, ANSI / ISEA 105-2011, American National Standard for Hand Protection Selection Criteria

Description:
New Jersey biophysical laboratory needed for tensile testing. Lab to tensile test sample in the 25kN range. There are two conditions: 1. The lab needs to be in NJ. 2. I would like to be present during the test.

Description:
LARGE FURNITURE COMPANY NEEDED INDIA MECHANICAL LABORATORY FOR BUSINESS AND INSTITUTIONAL FURNITURE MANUFACTURERS ASSOCIATION BIFMA TESTING FOR WORKSTATIONS

Description:
Contact Lenses Manufacturer needs medical device USA laboratory for physical testing and chemistry testing: Physi0chemical Testing for verification of the physico-chemical properties of materials - Test of exhaustive extraction (Soxhlet extractor) for at least 4 hours with a polar solvent (eg water) and a non-polar solvent (eg methanol) for each model of the lens - Test of spectral transmittance ...

Description:
India oil laboratory needed for propane testing. Quantification of propane in gas testing.

Description:
Yeast Manufacturer with alot of Temp,Pressure & flow instruments in manufacturing process needs India NABL accredited laboratory for metrology and instrument calibration.

Description:
Analytical Chemistry Laboratory needed for ASTM Testing. Independent Laboratory that can perform ASTM F945, Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

Description:
Physical Laboratory needed for closure testing: Closure scuffing testing and Transportation testing 200 pieces

Description:
India geophysical laboratory needed for ground testing. test for sink holes under concrete up to thirty feet down

Description:
Midwest analytical chemistry laboratory needed for maltodextrin testing for Determination of salycilates in maltodextrin

Description:
Europe FDA GMP Food Laboratory needed for FDA Testing of white oil according to FDA 172.878

Description:
India metallurgical laboratory needed for metallurgical testing: Lead Base Metal with element Nickel, Tellurium and Cobalt. Testing to be done by OES and element upto 2ppm.

Description:
Norway mechanical laboratory needed for mechanical testing of automotive parts. Tests to be performed on interior parts for the automotive industry.

Description:
USA cosmetics laboratory needed for cosmetic olfactory testing: odor intensity measurement of cosmetic ingredient (oil) samples. Anticipate 12 samples per month, on an ongoing basis.

Description:
Asia Toxicology Laboratory needed for Food Toxicology Testing

Description:
Analytical Chemistry Laboratory needed for deformulation testing / reverse engineering testing cosmetic hair care products. This project will consist of breaking down product formulations both identifying and quantifying the ingredients/raw materials used in the creation of the product.

Description:
FDA Microbiology Laboratory needed for cytotoxicity testing and antiviral testing for antiviral properties of one test product. The challenge virus will be Vericella zoster and the antiviral properties of the product will be assessed using a Post-Treatment test. The Post-Treatment test will determine if the product has inhibitory activity on the virus propagation in the cells. Prior to the antivir ...

Description:
Consumer Products Laboratory needed for Consumer Products CPSC Certification

Description:
Granite quarry needs geology laboratory for granite testing to Indian and International standards as per required for domestic sales as well as export. Please provide us information regarding the following queries: 1. What all tests are available for granite? 2. What do you require from us for the testing? 3. How much would each test cost? 4. How much time do you need for testing?

Description:
New York microbiology laboratory needed for microbiology testing: mold testing of heat resistant mold. molds separated and the count reported for each - heat resistant and non-heat resistant molds."

Description:
India Consumer Products Laboratory needed for Product Safety Testing

Description:
FDA GLP Preclinical CRO Contract Research Organization needed for Preclinical GLP Porcine Survivor Study Study needed observing pig survival over 10 days after vaporization/ablation on the bowel serosa. Probably a relatively few number of pigs needed.

Description:
Africa Biochemistry Laboratory needed for Phytochemical testing. Phytochemical analyses of two plant materials by Hplc-Ms or Gc-Ms.. you may send to me the cost, mode of payment and means of shipping the materials, and other informations that may be required.

Description:
India Medical Center needs India Clinical Laboratory for serology testing: ASO, H.PYLORI,RHOUMATIC FACTOR, HEPATITIS B AND C, MALARIA SEROLOGY TEST,ESR, WIDDLE TEST, BRUCELLA TEST, TPHA, RENAL FUNCTION TEST, LIVER FUNCTION TEST,LIPID PROFILE,GLUCOSE BILURUBIN TOTAL AND DIRECT, DIFFERENTIAL COUNT OF WBC, URINE ANALYSIS AND STOOL ANALYSIS

Description:
Israel or European Union food laboratory needed for food testing: glycemic index testing

Description:
Pharmaceutical Laboratory needed for Shelf Life Testing, Validation Testing and Stability testing for a new pain management patch

Description:
Animal Science Food Laboratory needed for Nutritional analysis with, Protien Fat fiber sugar FAt , Omega 3 and 6 Fatty Acid profile cARBS . Most likely 3 to 5 samples of horse and dog treats

Description:
USA analytical chemistry testing laboratory needed for VOC testing per HKMC specification MS 300-55

Description:
Geology Laboratory needed for sandstone identification testing

Description:
Materials Laboratory needed for ASTM Testing and FPT Testing: Lab testing for specialized shipping of Oil

Description:
Consumer Products Safety Laboratory needed for Consumer Products Safety Testing: solid vegetative soap testing to European directive 1223/2009. According to the regulation, we have to prepare a cosmetic product safety report for the soap. Required information for our safety assesment report are as follows: -Physical/chemical characteristics and stability of the cosmetic product -Microbiological qu ...

Description:
Eastern Europe Food Laboratory needed for EU fatty acid testing. Complete analysis of fatty acids and oleic acids on parameters according to EU standards for technical fatty acids and acids as a supplement to combined fodder.

Description:
Germany geology laboratory needed for sand testing. Test coarse garnet sand fine garnet sand anthracite

Description:
South Africa microbiology laboratory needed for biodegradibility testing of wet wipes

Description:
US analytical chemistry laboratory needed for alimet testing: Physical data on Alimet (2-HYDROXY-4-(METHYLTHIO)BUTYRIC ACID CAS=583-91-5). list of parameters: 1. Boiling point at 760mm Hg 2. Freezing point at 760 mm Hg 3. Density over a temperature range (0 to 100 deg C) 4. Viscosity over a temperature range (0 to 100 deg C) 5. Vapor Pressure curve (all the way to 760 mm Hg vapor pressure) ...

Description:
Food independent laboratory needed for nutritional testing fo nutrition value of camellia oil? Please specify how much it will cost?

Description:
Pharmaceutical analytical chemistry laboratory needed for PFS testing like break force, glide force, Separation Force, Resistance to overriding etc. please send us procedure and quote for the same.

Description:
Japan Snow Gear manufacturer needs safety laboratory for helmet testing: EN 1077 Testing and FIS Testing to FIS SPECIFICATIONS FOR COMPETITION EQUIPMENT of helmet. It is - In addition Helmet model to pass an additional specific test under EN 1077 test procedure but at higher test speed of 6.8m/s and also it said as below; o Additional test to be effected through CEN laboratories. The laboratory sh ...

Description:
FDA Vancouver Microbiology Laboratory needed for LACF Food Testing to test canned goods (Vegetable and Fruit) for PH and Bacteria ( such as Botulism, etc ) There would be anywhere from 5 - 25 different sample styles.

Description:
Pennsylvania Clinical Laboratory needed for serum testing for Serum EP

Description:
New butcher shop needs food laboratory for uncooked chicken testing.

Description:
Microbiology Laboratory needed for cell culture testing: microbial inhibition testing of 12 Bacillus species from our culture collection for their ability to inhibit up to 20 animal pathogens of our choosing. Please indicate what it would cost for a project to screen say 12 Bacillus strains against 20 animal pathogens.

Description:
India materials laboratory needed for physical testing for trussless roof sheeting by galvalume sheets

Description:
Large UAE Cosmetics Manufacturer needs microbiology laboratory for efficacy testing of anti-lice shampoo

Description:
Materials Laboratory needed for ISO Testing to ISO 354, DETERMINATION OF SOUND ABSORPTION to carried out acoustic test for a material made of recycled PET. Thickness is 9mm and sheet size is 4' x 8'

Description:
Materials Laboratory needed for ASTM Testing to ASTM F640-12 radiopacity for a PP fibre filled with BASO4. diameter 152µm & 380µm

Description:
FDA GMP Pharmaceutical Microbiology Laboratory needed for USP Microbial Testing: 3 SAMPLES NYSTATIN ASSAY TEST BY Antibiotics-Microbial Assays as per USP general chapter 81 and suspendability test as per Nystatin USP monograph by Microbial (Suspendibility (where packaged for use in the extemporaneous preparation of oral suspensions) - Transfer about 200 mg, accurately weighed, to a 250-mL beaker c ...

Description:
Oil Laboratory needed for ASTM Testing of Oil

Description:
US Food Laboratory needed for honey testing for pesticides, herbicides, heavy metals, toxins; chemistry in Sample of honey blend

Description:
Plastics Laboratory needed for plastics testing of test Microwave use plastics laminated bags that under 21 CFR 177.1390 (Laminate structures for use at temperatures of 250 deg . F and above) Our microwave steam bag is made of Polyester (outside layer) and Cast Polypropylene (inside layer- food contact) laminated with Polyurethane adhesive.

Description:
Materials Laboratory needed for Metallurgical Testing of Retaining rings made out of 303 Stainless Steel per Silver getter testing per Delphi DX900419

Description:
Materials Laboratory needed for ceramic testing: F 417-87 Flexural testingMohns scale and Rockwell 45N scale for hardness testingTensile and compressive strength testingC 408 Thermal conductivity testingD 149-97A Dielectric strength testingCeramic samples will be provided for testing. Up to 4 samples can be provided for the testing. Samples will need to be returned on completion of testing.

Description:
Virginia Laboratory or North Carolina Laboratory needed for clinical testing. Testing done for criminal trial to connect strands of Genital Warts from assaulter to the victim. "

Description:
Middle East Analytical Chemistry Laboratory needed for bauxite testing: Complete chemical and physical analysis of the sample The analysis shall show all the important Bauxite specifications, comprising of chemical and physical contents as per following Physical Specifications: Moisture (%): Size: Bulk Density: Assessed/Declared Quantity (MT - Metric Tonne): Chemical Specifications: Total Alumina ...

Description:
Pharmaceutical Product Safety Laboratory needed for Microbiology testing and product safety testing of excipient to obtain GRAS status. Acne: propionibacterium zones of inhibition, staph species involved in acne also; MIC value (minimum inhibitory concentration) 2) USP 51 antimicrobial test 3) Antiseptic challenge: 5 microbes: E coli, Staph aureus, pseudomonas aeruginosa, candida a ...

Description:
NABL Europe pharmaceutical laboratory needed for pharmaceutical testing of Empty hard gelatin capsules Number of samples: 2 - 3 per month

Description:
India Medical Device laboratory needed for medical device certification testing: certify Medical grade silicone products for implants and other uses(bottle nipple). Please send me the addresses and contact details of all labs that are approved by the Govt of india who can carry out such tests.

Description:
California FDA medical device aboratory needed for FDA certification testing of illuminating device used in sports type scopes. Need to certify if it's a LED device or class 1 laser as light source

Description:
Pacific Northwest USA analytical chemistry laboratory needed for pesticide residue testing on fresh potatoes

Description:
Geological Laboratory needed for mineral analysis of rocks for mining claims.

Description:
Large automotive manufacturer needs Brazil packaging laboratory for ISTA Testing and ASTM Testing testing for steel returnable shipping containers in Brazil. Our racks footprints range in size from 45" x 48" to 108" x 80". The heights vary from 27" to 75" and the weights reach up to 3,000 lbs. I have a copy of our testing specifications that I can send once I receive an email response.

Description:
NY pharmaceutical laboratory needed for analytical chemistry testing of pain reliever from all natural teas and herbs. we need our product assayed for patent purposes"

Description:
Canada GMP Laboratory needed for USP Testing: BLOOM TEST on Gelatin USP sample.

Description:
Materials Laboratory needed for ASTM Testing to astm D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

Description:
Texas environmental laboratory needed for soil testing: mineral analysis for gold, oil, or water minerals.

Description:
NABL India Preciical Laboratory needed for preclinical study: ionophoretic transdermal patch.we want to test the performance of that transdermal patch.

Description:
Looking for supplier to conduct and certify USA Product Safety Laboratory needed for ANSI Testing of safety lenses for the ANSI Z87.1-2010 American National Standard for Occupational and Educational Eye and Face Protection Devices.

Description:
Florida environmental laboratory needed for pesticide testing on live oak trees, testing for herbicide in plant tissue

Description:
Colorado analytical chemistry laboratory needed for natural gas testing: Natural Gas Analysis by GC from a contract laboratory located in central or southern colorado. A local laboratory is needed to ensure prompt sample turnaround time!

Description:
Europe FDA GMP analytical chemistry laboratory needed for GMP Testing: Assay of heparin according Ph.Eur.7 ed. 2.7.5

Description:
Food Laboratory needed for food ingredient testing: Ingredient's name and per 10 grams how many ingredients have in it. ie:I am going to research for Castor Oil.

Description:
Physical Laboratory needed for AASHTO Testing. mass concrete volume stability testing for hydraulic structure for Coefficient of thermal expansion: AASHTO T336

Description:
Cosmetics Company needed for food laboratory for metal testing for food, like supplement. Please provide pricing.

Description:
Southern California physical laboratory needed for sound transmission loss and absorption testing

Description:
Environmental Simulation Laboratory needed for marine environmental testing: IEC Testing to IEC 60945, Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results. Need to perform environmental testing on marine gyrocompass products. Test needed: a) Rain test (IEC 945:1994, 4.4.8); b) Conducted interference test (IEC ...

Description:
China Toy Laboratory or Consumer Safety Laboratory needed for consumer safety certification testing to Japanese Standards Certify Baby stroller for Korea and Japan for mandatory standards KATS 2010-677Japanese Standard CPSA 0001-2009Advice in mandatory regulations and standards to comply with. Test and certify according above.

Description:
India FDA GMP preclinical laboratory needed for preclinical studies. Ex-Vivo Study (Macrophage uptake studies , MTT and apoptosis assay for cytotoxicity) using FACS analysis of polymers based drug delivery systems for development of oral delivery of proteins/ peptidal drugs. .

Description:
Hong Kong FAA Certified textile laboratory needed for FAR Testing to FAR 25.853 : Horizontal Flammability test - Fire Test to Aircraft Material (FAA Certified) Our test sample will be used for component of air craft seat. The width of rigid tape is 55 mm. Please kindly advise sample length required for testing. Lead time for testing Are you able to provide us the Certificate ( material ...

Description:
China mechanical laboratory needed for mechanical testing: Vehicle glovebox testing and console testing to IP Console SDS Version23 IP-0129;DVM-0044-IP. Plastic assembly. Max overall dimension,290mm*225mm*80mm. Two samples.

Description:
USA agriculture laboratory needed for hay testing of 6 Bermuda hay samples. Hay needs to be tested for all nutritional, mineral, and oxalate concentrations

Description:
GLP Europe toxicology laboratory needed for GLP Testing: Biodistribution Study"

Description:
India analytical chemistry laboratory needed for forensic testing of powder chemical in clothes

Description:
Petrochemical firm needs middle east plastics materials laboratory for ASTM Testing 2 samples of PET polymer granules to ASTM D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditionsor equivalent

Description:
URGENT: Stainless steel electrical junction boxes manufacturer needs ISO/EC 17025 physical laboratory for IK10 Impact testing to ASNZS 60079 or IEC 60079 and the lab must be ISO/EC 17025 certified.

Description:
India Laboratory needed for diamond testing of Mining Ground Sample.

Description:
Microbiology Laboratory needed for ICH, OECD bacterial mutagenicity assay testing to ICH S2(R1) and OECD 471 guidelines, as stated in ICH guideline M7 (ref EMA/CHMP/ICH/83812/2013). In addition, it would be of additional value if the assays are performed in compliance with GLP regulations. Please indicate:  the cost for bacterial mutagenicity assay,  the timing (when test can be planned, how lo ...

Description:
Toronto environmental laboratory needed for material testing of HVAC vent in condominium.

Description:
Manufacturing company needs marine toxicology laboratory Marine Pollutant testing on one of our products. Can you quote cost, turn around time and required sample size

Description:
India Food Laboratory needed for food testing of frozen food products

Description:
USA sensory laboratory needed for Tactile Sensory Analysis of nonwoven fabrics. Conduct a sensory panel testing (tactile) for one of the development projects we are working on. We want to assess softness level of Nonwoven films. Please provide a brief description of the outcome measurement (numeric scale, qualitative description, etc), and a cost estimate for the testing.

Description:
Pharmaceutical company needs Analytical Chemistry Laboratory with validated test method for contaminate testing service for a contaminant "BENZODIAZEPINES" in dietary supplement (multi vitamin & mineral) softgel.

Description:
US analytical chemistry laboratory needed for vitamin testing: Major B vitamins, per sample analysis, for B1, B2, B3, B6, B7, B9, B12

Description:
Chicago Electrical Laboratory needed for certification testing: Mated Electrical Connector IP69K Testing. There will be two sets of mated assemblies, 6-10 samples each. Each mated pair will consist of a male and female overmolded connector assembly with cable or wires attached.

Description:
India NABL Laboratory needed for Alcohol Breath Analyser Testing

Description:
Biofuel company needs analytical chemistry laboratory for Jatropha Seed Testing for Phorbol ester

Description:
Microbiology Laboratory needed with validated test methog go Lactobacillus spp. MIC testing using E-test and microdilution methods for 25 common antibiotics according to EFSA QPS guidelines

Description:
US CLIA / CAP clinical laboratory needed for serum testing: LC MS/MS testing for specific proteins in serum for use as a diagnostic test.

Description:
of its products to confirm compliance with USFDA and/or Food CODEX requirements for additives/dyes that have restricted limits.

Description:
Materials Laboratory needed for ASTM Testing, Swirling Flask Dispersant Effectiveness testing

Description:
US agriculture and microbiology laboratory needed for crop study using sedimentary pea gravel to grow crops from seed to harvest without any fertilizer nor soil. I need to be able to conduct these 23 test on a period basis. I didn't see food nutrition testing, but I imagine you can do that as well. Can you also study the composition of rock to determine its DNA. We want to know the varying compo ...

Description:
Oklahoma materials laboratory needed for ASTM Testing: Gympsum testing of raw gypsum samples to ASTM or other required to determine quality for use of gypsum for wallboard, plaster and/or food additives, 10 samples Will provide crushed gypsum from core.

Description:
Food Laboratory needed for certificate of analysis ingredient testing of protein bars. The COA on the content of the ingredients within my bars. I have six different bars but starting one would be fine

Description:
Environmental Laboratory needed for water chemical testing

Description:
Soutern USA environmental laboratory needed for soil testing: 2- 3 samples of in-situ soil Oxidizing capacity; Reducing capacity; Neutralization capacity; Adsorption capacity; Cation exchange capacity Acid generation capacity; Iron-aluminum extraction; Mineralogy (XRD); Total organic carbon; and Sulfur extraction

Description:
NABL / AALAC electrical laboratory needed for complete electronic testing of electronic fan regulator (capacitor type) as per IS:11037

Description:
"Research Laboratory is seeking microscopy contract laboratory for confocal and SEM of E.coli and other bacterial species for downstream immunohistochemistry."

Description:
India Laboratory needed for electron microscopy analysis. Two samples are to be tested. These are ball milled powder samples which are to be analysed using scanning electron microscope.

Description:
Preferably Mumbai Consumer Products Laboratory needed for Mosquito Repellant Testing. Testing of mosquito repellant developed from Deshi cow urine,lemon grass,neem,termeric.

Description:
USA Polymer Laboratory needed for injection molding of six different polymers injection molded to ASTM D 543, Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents , chemical reagent, dimensional changes, exposure, mechanical property(referencing ASTM D 543, 9.1.1.1 for weight and dimension change). The standard specimens are supposed to be disks that are 2 inches in di ...

Description:
Phillipines food ISO laboratory needed for coffee testing. Analytical testing and microbiology testing on samples (green beans & roasted beans)Analytical and microbiological testing including proximate composition, chlorogenic acid, caffeine, amino acid profile and ochratoxin A

Description:
Analytical chemistry laboratory needed for menthol testing

Description:
Safety Laboratory needed for ANSI Testing of safety gloves to ANSI 105-2011 American National Standard for Hand Protection Selection Criteria

Description:
Analytical chemistry laboratory needed for residual testing of garment tested for residuals post green earth dry cleaning due to liability re: an allergy complaint.

Description:
United States Analytical Chemistry Laboratory needed for hydrocarbon testing: total chlorine in a hydrocarbon matrix in the ppm range of 0 - 20. Chlorine is present as both organic can inorganic. Ongoing requirement of 5 -10 samples per month

Description:
Physical Chemistry Laboratory needed for particle size testing of particle emitted from an in-house built smoke machine. We believe the particles are from .5-10 microns in size but wish to confirm.

Description:
Consumer Products Laboratory needed for ASTM Testing of moldable clay that needs to be tested to conform to ASTM - D4236, Standard Practice for Labeling Art Materials for Chronic Health Hazards

Description:
China environmental laboratory needed for biomass testing and water testing: three samples which are primarily composed of biomass and water and also containing ethanol and acetic acid . We would like to analyze the samples using GCMS and/or LCMS to look for the possible presence of ppm quantities of Benzene Toluene Ethylbenzene Xylenes Phenol Naphthalene

Description:
India Approved NABL laboratory needed for for mechanical testing & chemical testing

Description:
Analytical Chemistry needed for vitamin supplement testing: Laboratory stability testing in order to determine the life shelf of our supplement

Description:
Organic skin care company needs microbiology laboratory for microbiology testing (bacteria, mold, yeast, fungus) in skin care lotions, clay masks

Description:
Northeast USA Food Microbiology laboratory needed for US FDA food microbiology testing for compliance with the USFDA requirements for removal from the Red List.

Description:
Materials Laboratory needed for Toxicology Testing, ASTM Testing, Biodegradability Testing: oxo-biodegradation tests on plastic bags to ASTM-D6954 standard. These bags have been manufactured using an additive. 1. Chemical composition 2. Abiotic degradability 3. Biodegradability in soil 4. Eco-toxicity

Description:
Analytical Chemistry Laboratory needed for solubility testing for Solubility data in water for Brassylic Acid at 25, 50, 75 & 90 degree C.

Description:
Malaysia Materials Laboratory needed for EN BS Composite Materials Testing to BS 476: Ignitability (BS 476 Part-5) Fire Propagation Index (BS 476 Part-6) Surface Spread of Flame (BS 476 Part-7) Please send sample size required as well, lead time to complete the test and payment details. In addition, we would like to know your full list of testing services so it will be easy for us t ...

Description:
Materials Laboratory needed for EN safety film testing to BS EN Standards: BS EN356, Glass in building. Security glazing. Testing and classification of resistance against manual attack Please give us the quotation and do advise us on the test.

Description:
PA, NY, NJ, FL, DE medical device laboratory needed for stability testing: shelf life testing of medical device wraps used with cooling system

Description:
URGENT: FDA GMP Microbiology Laboratory needed for microbiology testing of smoked salmon held by FDA.

Description:
Agriculture Biotechnology laboratory needed for biofuel research and development using a stain of Bactria and grape pomace to the production of Butanol for a USDA ,SBIR grant.

Description:
Florida food microbiology laboratory needed for Standard food microbiology screening. Microbiology Testing for APC, coliform, e. coli, yeast & mold

Description:
Environmental microbiology laboratory needed for microbial spore testing on autoclave. Testing needed prior to health department

Description:
USA Clinical Laboratory needed for Clinical testing for efficacy of potato-based resistant starches and resistant oligosacharrides as dietary fibers in human food products

Description:
Mining company needs Metallurgical laboratory for metallurgical analysis for Si(Silicon): 7-12% Hf(Hafnium): 1-2% Zr(Zirconium): 20-30% Fe(Iron): 20-40% Al(Aluminum): 0.7-2% Ti(Titanium): 24-30% Cr(Chromium): 1-2%

Description:
Africa geology laboratory needed for geotechnical testing

Description:
Food Laboratory needed for stability testing and nutritional testing for nutritional labeling using both the chemical test and database calculation in addition to your shelf life tests. My product is a confectionary consisting of three all-natural common ingredients that do not require refrigeration and is made over a stove and cooled afterwards.

Description:
Electronic laboratory needed for BIO Certification testing of Multi Media Projectors. As per Indian Government guidelines, we need to get the product BIS certified.

Description:
Packaging Laboratory needed for container closure analysis of 0.5 mL of a lyophilized protein solution in a 12 x 75 mm serum vial with rubber stopper. This product will be sent to the FDA for licensing, so we are looking for an FDA approved method. I have looked into the standard methylene blue test, but don?t hink if this is the best method for our product. I see that you use the vacuum decay tes ...

Description:
Textile lab needed for testing of fiber content on a narrow stretch lace fabric 6-7" wide

Description:
East Coast US lab needed to have foliar (conifer and hardwood) samples tested for Chlorophyll (a, b, and total) and for other pigments and carotenoids. We are interested in specific pigments, so HPLC could be used.

Description:
Pennsylvania analytical chemistry needed for USP testing to MICROBIOLOGICAL EXAMINATION OF NONSTERILE ENUMERATION METHODS PRODUCTS USP 61 & USP 62 Microbial Enumeration of Nonsterile Products: Tests for Specified Microorganisms

Description:
USA Pharmaceutical analytical chemistry laboratory needed for validated analytical chemistry testing by validated method for: 1. Total Polyphenols (by UV) NLT 20.0% Hydroxytyrosol (by LC) NLT 5.0% Verbascosides (by LC) NLT 1.5% Our material is Olive Fruit Extract Powder (Olea Europaea L.) ________________________________________ 2. Total Turmerones ( & ᵝ Turmerones, AR-T ...

Description:
West or Northwest USA materials laboratory needed for polymer testing by SIMS or Raman. Need to analyze some defects in a polymer film. Our analysis hasn't been able to isolate any obvious contaminates. Our results just return sample matrix material. I was thinking SIMS or Raman to determine whether material within the defect area is in fact part of the original matrix or is foreign.

Description:
Polymer Laboratory needed for polymer testing of composite filling (polymer)by 3D profilometer and vicker microhardness tester.

Description:
Materials Laboratory needed for FEDERAL MOTOR VEHICLE SAFETY STANDARDS AND REGULATIONS FMV Flammability Testing to FMVVSS302,

Description:
Southern USA medical physical laboratory needed for ASTM Testing to ASTM F543. Insertion torque and pullout testing of 10 different styles of medical devices for orthopedics. 5 samples of each device (50 total).

Description:
ISO 17025 Food Laboratory needed for food analytical chemistry testing of carragenan: Carragenan viscosity, pH

Description:
Europe analytical chemistry laboratory needed for crude oil testing to do analyses to determine electric conductivity and dielectric constant of crude oil in the frequency range of 20Hz to 100kHz and temperature 20 to 60°C. We are interested on evaluate the electric behavior of one sample of crude oil (BSW 1.5%) in these ranges of frequency and temperature.

Description:
As ia Food Safety Laboratory needed for proficiency testing of food device that measures the level of contaminants, harmful substances, salts (nitrates, nitrites, phosphates, sulfates, chlorides...) in fresh fruits and vegetables. As we want to open market with our product smartly we are looking for a some sort of a recognition. With the help of authority laboratory we want to conduct profficie ...

Description:
Dental composite filling material manufacturer needs accredited laboratory for Biocompatiability Testing, PHysical Testing and EN ISO Testing EN ISO 4049:2009 standard procedure and also provide us the test result reports as they are also indicated in this standart. Test names: Polymerisation - Flexural Strength - Diametral Tensile Strength - Water Absorption - Biocompatibility? .

Description:
New Zealand FDA GMP materials laboratory needed for Solubility testing of ceramic (glass ceramic, surface area >30cm2) in acetic acid. We supply you the ceramic plate with specified surface area. Soak the ceramic plate, which is pri-dried at 150C for 4hrs, in 4vol% acetic acid (analytical grade), staying in oven 80C for 16hrs. After that, find out a weight loss by comparing the weights of the c ...

Description:
California analytical chemistry laboratory needed for cosmetic face care formulation testing, Reverse formulation testing, deformulation testing

Description:
Small Business Owner that would like to start bottling family recipes of pasta sauce and chili needs food laboratory for food testing. food products that I bottle before I begin selling to the public.

Description:
Physical Laboratory needed for flammability testing: Bs 476 5,6,7 on frp material.

Description:
OECD Compliant Europe Toxicology Laboratory Need needed OECD Toxicology Testing for OECD compliant aquatic toxicology testing to determine potential adverse effects of an agricultural chemicals on frogs.

Description:
Food Laboratory needed for microbiology testing: raw milk-butter fat, cell count, coliform, listeriosis, other pathogens?, cheese-same as raw milk

Description:
Canada pharmaceutical laboratory needed for European Pharmacopeia testing: EP Testing. All relevant specifications from the EP would then apply. This would include chapter 5.8.1 (current edition 7.5): "Microbial Quality of Herbal Medicinal Products for Oral Use". In this case, testing for total aerobic microbial count, total combined yeast and moulds count, bile-tolerant gram negative bacteria, Es ...

Description:
Mexico Mechanical Laboratory needed for ASME Testing: Charpy Impact Test required per ASME Sect. VIII

Description:
Central America environmental laboratory needed for environmental chemistry testing and Water quality testing (nutrients, heavy metals, etc); Sediment sampling (nutrients, heavy metals, etc); Biologic components (coli, etc); Marine and Freshwater samples; Taxonomy

Description:
Pharmaceutical Laboratory needed for contract synthesis of flavonoids. Large project.

Description:
Law Firm needs Florida analytical chemistry laboratory for XLR-1 testing. For a criminal case, test approximately 500 packets of "spice" or synthetic marijuana. The specific compound we are looking for is XLR-1

Description:
India Analytical Chemistry Laboratory neeed for DIN Testing: Porosity/Corrosion resistance testing: testing in a saturated atmosphere in the presence of sulphur dioxide DIN50018-test KFW 2,0 S.

Description:
Food Laboratory needed for formulation of silicone base food release spray to be used in equipment like waffle bakers.

Description:
Food Laboratory needed for nutritional testing: Nutritional Analysis Testing on a 100g sample of a Protein Blend as well as giving the Analysis Certificates. Also furnish us with your Accreditation Certificates.

Description:
FDA GMP US analytical chemistry laboratory needed for plastics Extraction testing outlined by FDA 21CFR177.1520 and 21CFR176.170 for molded parts based on polypropylene.

Description:
Asia toxicology laboratory needed for cosmetics toxicology testing: toxicological assessment to introduce our new cosmetic product in Europe market

Description:
US Environmental Laboratory needed for biodegradeability testing of mineral oil to Coordinating European Council (CEC) Standard CEC-L-33-A-94,

Description:
India Materials Laboratory needed for coating research development for development of Chromium nitride alloy with Aluminium nitride, is there a simple method like Cyanide bath, so we can get Cr=N-N=Al alloy structure ?

Description:
Asia government would like asia food laboratory for palm oil fatty acid testing:fatty acid to measured a partition coefficient and water solubility.

Description:
Nutraceutical Manufacturer needs Quality analytical chemistry laboratory with validated method for analysis for Citrus Extract Testing of extract from China (HPLC) for Nobiletin and Tangeretin content,

Description:
Packaging Laboratory needed for Crush Testing of packaging.

Description:
Materials Laboratory needed for ASTM Testing: Conduct Bidirectional Reflectance Distribution Function (BDRF)analysis on a proprietary daylight redirecting window film

Description:
US Polymer Laboratory needed for molecular weight testing by X-ray Photoelectron Spectroscopy (ESCA) Trying to assess approx molecular weight for roughly 3 organic polymer (singly-charged) high mol weight populations on surface of material.

Description:
Analytical Chemistry Laboratory needed for USP Testing: USP Grade Nicotine Certification Testing

Description:
Aluminum company needs analytical chemistry laboratory for contaminant testing in kerosene lubricant additive alcohol and esther...contaminant concentration, 300 viscosity and 500 viscosity "Hi, this is Donna Compton with aluminum and minute walk Wisconsin We're trying to locate a lab they can do it anyway this (delay?) should work for us to tell us the concentration of

Description:
US polymer laboratory needed for Polymer Testing: Small Angle Xray Diffraction. Trying to assess approx MW (very high) for 3 different organic polymer populations on surface of material.

Description:
US polymer laboratory needed for spectroscopy testing: tip enhanced raman spectroscopy TERStwo (2) samples to compare; trying to assess approx high mol weights of 3 different organic polymer populations on surface of material

Description:
Europe Pharmaceutical Toxicology Laboratory needed for toxicity testing: local toxicity for intravenous infusion in rabbits, single dose

Description:
Microbiology Laboratory needed for USP Microbiology Testing to USP 62, Microbiological Examination of Nonsterile Products - Microbial Enumeration Testing Labs and Tests for Specified Organisms, if so please send a quote containing the following: test swab, culture tube, documentation, packaging and all lab fees.

Description:
Biotechnology company needs USA biochemistry laboratory needed for Fast Atom Bombardment Mass Spectrometry Testing: fab-ms testing

Description:
USA analytical chemistry laboratory needed for resin testing: Water solubility testing for water solubility determination of solid organic resin

Description:
Large Pharma needs Europe or USA CRO, Contract Research Organization specialized in measuring marker of oxidative stress, gluocotoxicity (including methyglyoxal) and inflammation in blood, urine and tissues

Description:
HOKLAS accredited laboratory needed for ASTM Testing to ASTM F2613-13,Standard Consumer Safety Specification for Children's Chairs and Stools . Please reply urgently.

Description:
FDA GMP pharmaceutical laboratory needed for stability testing: R&D Testing of aqueous Vitamin, acylated amino acid and a synthetic corticosteroid. Time points at 0,1,3 months with possible extension to 6, 9 and 12 months

Description:
China or US Toxicology Laboratory needed for OECD Toxicology Testing: Teratogenicity (OECD 414); Two generation reproductive Toxicity Study (OECD 416); Toxicokinetics Study (OECD 417); Fish, early life stage toxicity test (OECD 210); Seed germination/ Root Elongation Toxicity Test (OECD29) OECD: 414 416 417 210 29

Description:
FDA Medical Device Laboratory needed for Medical Device Testing of Intraloral Orthodontic appliances for long and short term use 1 clear acrylic disc 18mmx100mm

Description:
Analytical Chemistry Laboratory needed for nitrogen testing. Test the dew point of nitrogen of capacity plant 2NM3/hr. It is urgent pl provide contact details

Description:
Professional Service Firm needs Pennsylvania or New York Geology Laboratory for Rock Testing: three rocks that need to be tested for make up. My Client lives in New Hope, PA and can ship the rocks wherever the Lab is located.

Description:
South Korea and Europe Toy laboratories needed for toy safety testing : - Test Name : EN 71 Part 1 - Safety of toys - Mechanical and physical properties - Test Name : EN 71 Part 2 - Safety of toys - Flammability - Test Name : EN 71 Part 3 - Safety of toys - Migration of certain elements (19 elements) Please provide me the quotation if you perfom this test.

Description:
India toxicology laboratory needed for Toxicity Testing of heavy metals on the liver of fish

Description:
Food Laboratory needed for Capsaicin Analysis on powdered pepper samples: HPLC testing of 10 high Capsaicin pepper powder samples.

Description:
Manufacturer of UPVC roofing sheets needs materials laboratory for ASTM Testing to ASTM D4434/D4434M-11 ?Standard Specification for Poly(Vinyl Chloride) Sheet Roofing ? - ASTM D6878/D6878M-11a ?Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing? - CAN/ULC-s107-10 ?Standard Methods of Fire Tests of Roof Coverings? - A123.21-10 ? ?Standard test method for the dynamic wind uplift ...

Description:
Biopharmaceutical Manufacturer needs US FDA GMP bioanalytical laboratory for post usage 0.2u filter integrity testing (non-hazardous)

Description:
India Food Laboratory needed for spices testing

Description:
Mexico Food Laboratory needed for milk testing: Milk Analysis in powdered milk, one sample

Description:
Automotive Laboratory needed for mechanical testing: Door Slam Testing System: Specifications- Robot(outer slam) & Pneumatic(inner slam)- 4 vehicle available- Control up to 4 doors- Available In Environmental condition- 200 slams/h, 1.6life-100,000cycle- Test item- GMW15094 Door inner slam test & measuring - objective data.- GMW15093 Door check load durability test

Description:
Geochemistry Laboratory needed for Acid Rock Drainage Testing (ABA). Testing Laboratory must have a permit to receive samples from foreign countries. Also, it must have the required certifications for mining tests.

Description:
Pacific Northwest USA physical laboratory needed for physical testing: Vibration testing, Mechanical Shock testing, Humidity testing, and Temperature Shock testing

Description:
Environmental Laboratory needed for environmental testing: ASTM Testing of 4 samples per year to ASTM International Method D7066-04 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

Description:
Analytical chemistry laboratory needed for chemical testing: chemical characterization of the product : Resin acids and Rosin acids, fumarated, esters with pentaerythritol

Description:
Canada analytical chemistry laboratory needed for chemical testing on liquid chemicals

Description:
Food Laboratory needed for tequila testing: parts per million spirit Tequila Report I have a report to follow that I need for Japan but its in Spanish and it doesn't call out the color ingredient and it needs to be in English I would like to send you the sample ASAP so can someone contact me ASAP

Description:
Canada or USA physical laboratory needed for NFPA Testing: Fire testing on textiles used in the production or roller type window shades to NFPA 701

Description:
Histology Laboratory needed for histological tissue preparation followed by TUNEL and activated caspase 3 immunohistochemistry on human tissue

Description:
USA biomedical laboratory needed for Validation Testing between two blood collection devices for hematology and common blood chemistry analytes.

Description:
India microbiology laboratory needed for microbiology testing in India

Description:
USA bioanalytical laboratory needed for bioanalytical testing or rabbit knee joint synovial fluid (2 ml) each that desire IGF-1, TGF-b, IL-1, metaloproteinase, TNF--a and lubricin I have 55 samples (110)

Description:
US pharmaceutical analytical chemistry laboratory needed for pharmaceutical surface tension testing. One sample

Description:
Dairy Manufacturer needs India Packaging Laboratory for packaging film testing to ISO 22000:2005 requirement,We need to test all our milk film and migration for PP,PET and LDPE materials at NABL accredited Lab.Henceforth we need the sutable labaratory address in india particularly in tamilnadu. External testing for milk film 1. Kinetic co eff of friction 2. Tensile strength 3. Elongation at break ...

Description:
US Microbiology Laboratory needed for USP Testing: microbiological challenge testing USP51 Testing of liquid dietary supplements (energy shot type) efficacy of preservative system. Five types of samples to test. Use USP51 if appropriate

Description:
Materials Laboratory needed for biodiesel testing of custom mixture of oil & clay slurry, it needs to be heated to 140F, stirred & checked for viscosity quickly before clay falls out of suspension, would like to send the sample in for testing, please advise if you can do this

Description:
North America materials laboratory needed for paint testing: comparison analysis of two paint chip samples to identify if they are from the same source.

Description:
British Columbia, Canada electrical laboratory needed for ANSI Testing to ANSI 12.1 Revenue grade meters/CT energy metering module that can meter single/polyphase 120V Rated. All configs require a neutral. The meter has 100mA inputs. Works with 100-0.1A;200-0.1A;400-0.1A CT's.The module has a local display unit

Description:
New England Food Laboratory needed for ground beef testing to determine macronutrient content of ground beef. I am looking to do an experiment to come up with a protocol for lowering the fat content of beef. When designing meal plans for my clients, I incorporate organic grass fed beef. Unfortunately, I can never find it in the 96% lean variety. I like to use the 93/7 beef and then wash it off in ...

Description:
USA consumer products laboratory needed for olfactory comparison study testing of Air Fresheners fragrances

Description:
Cosmetics analytical chemistry laboratory needed for cosmetics testing of Collagen gel cosmetic. Product Identity Confirmation Testing 3 ingredients: collagen, water and lactic acid. One sample, or one per each test - not sure. Product is temperature sensitive has to be handled in max 79 degrees F preferable methods are:1. Stegemann's method2. Raman spectroscopy3. Kjeldahl method

Description:
Toronto materials laboratory needed for stone testing a new type of stone - chemical testing, durability testing, toxicology testing for any environmental toxins, etc. (stone needs to be proven Ok for construction - building houses; the stone need to be durable enough to surive (not to crack) during temperature changes (from hot to cold and vice versa).

Description:
Preclinical Laboratory needed for preclinical studies: sublingual preclinical testing.

Description:
USA radiochemistry laboratory needed for radioactivity testing for radioactivity in dietary supplements (radioactive isotopes). Currently we are manufacturing products in Japan and the sources are brown seaweeds. We would like to make sure that the extracts are free of radioactive substances. Please let us know if you can help us.

Description:
Texas physical laboratory to needed for ASTM Testing: Aerosol testing for flashpoint testing for personal care products and the Flammability of Aerosol Products to ASTM for Flash Point & ASTM D3065 Standard Test Methods for Flammability of Aerosol Products

Description:
Microbiology laboratory needed for ASTM Testing: Virucidal Testing to ASTM E1053 - 11 Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental SurfacesASTM E2362 - 09 Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection.

Description:
Bioanalytical laboratory needed for biological particle testing of synthetic biological particles at x235,000, similar to vlps. FDA validation eventually; research level initially

Description:
US GMP or ISO certified laboratory needed for analytical chemistry testing: astaxanthin analysis by HPLC UV, however it has required 100's of grams of dried biomass- we would like a method that only uses mgs. there are methods in the literature but our content is low percent less than 1 so it may be a tricky analysis to isolate since there are many different pigments in the sample as well as lipid ...

Description:
Atlantic Coast USA food analytical chemistry laboratory needed for edible oil testing: Need a test for Total Chlorine, chloride and/or organic chlorine in vegetable oil. Note that Total Chlorine (and chloride) expected to be relatively high (~up to 1000 ppm) organic chlorine is 5~50 ppm

Description:
MIDDLE EAST COMPUTER LABORATORY NEEDED FOR PETROLEUM & GAS REFINING SIMULATOR TESTING OF SOFTWARE DESCRIPTION:- DYNAMIC REAL-TIME PROCESS SIMULATOR.THE TRAINING OF THE SOFTWARE ARE PROVIDE SKILLS FOR TRAINEES TO MANIPULATE ALL OPERATIONAL MALFUNCTIONS,CAN BE USED FOR OPERATOR TRAINING AND QUALIFICATION,STUDENT EDUCATION AND EVALUATIONS. ORIGIN:-EUROPE COUNTRIES AND PREFER FROM (GERMAN ...

Description:
Large consumer products manufacturer needs India Third party laboratory who can provide lyophilization support testing of it's lyophilization process.

Description:
Polymer Laboratory needed for polymer testing of PE film with trace amount of additive. Could you identify the additive?Any spectroscopy or thermal analysis may be working?

Description:
Large multinational medical device corp needs analytical chemistry laboratory for polymer testing: TGA testing with either FTIR or mass spec analysis of evolved gas to determine temperature for onset of HF generation.

Description:
Toxicology Laboratory needed for DNA-Adduct testing using LC/Tandem MS on human serum for quinolones Requesting the availability of DNA-Adduct testing on human blood/serum using LC/Tandem MAS (LC/MS) for the protocols to identify [1,5-Dimethoxy-9, 10-Anthraquinone] which is formed upon DNA cleving of 4-quinolone antibiotic forming an Anthraquinone [Ethyl 6,8-difluoro-4-hydroyqinoline- ...

Description:
Food Laboratory needed for food meat testing of Gyro products. Need testing for species of meat and ratio. Total percentage of meat. Total percentage of fat. Percentage of water added.

Description:
Pharmaceutical Product Safety laboratory needed for Product efficacy testing and biodistribution testing. Biodistribution of intramuscular injected botulinum neurotoxin a Efficacy of botulinum neurotoxin a using EMG

Description:
US Bioanalytical laboratory needed for human blood testing . Must have already validated human whole blood assay experience. Testing of Human whole blood assay (three donors) to test modulation of the inflammatory response by three (3) test articles (plus positive and negative controls)after stimulation with LPS and/or PMA (n=8 per treatment group). Measure cytokine/chemokine release (13 analytes ...

Description:
United States Bioanalytical Laboratory needed for blood testing: Canine whole blood assay to test modulation of the inflammatory response by three (3) test articles (plus positive and negative controls)after stimulation with LPS (n=8 per treatment group). Measure cytokine/chemokine release (13 analytes using Milliplex canine bead panel) at two (2) time periods.

Description:
Electronics laboratory and analytical chemistry laboratory needed for mercury lighting fitting testing. Test for LED, sodium vapor, metalhalide, cfl, and mercury light fittings "

Description:
Bioanalytical Laboratory needed for cell line testing of NTERA-2/D1 cell lines also termed as NT2 or hNT cell lines

Description:
India Histology Laboratory needed for Histological analysis of chick embryo

Description:
Large consumer products laboratory needs analytical chemistry laboratory for Surfactant/Granular Detergent Analytical Testing

Description:
Materials Laboratory needed for DIN Testing of Rubber Closed Cell Elastomeric Thermal Insulation in Tube and Sheet Form to DIN 4102-1, DIN 1988/7, DIN 4109, Closed Cell Content Test, etc.

Description:
South Africa Oil Laboratory needed for kerosene testing: 1. Cetane number testing of Kerosene which are 5-6 samples with different quantities of cetane improver and Diesel Lubricity Improver. 2. Cetane number testing of 2 samples of diesel oil

Description:
Analytical Chemistry Laboratory needed for analytical chemistry Testing mass diffusion coefficient of metal ions in a liquid solution. 5 Samples at 4 different temperatures. Testing the same samples for specific heat capacity and thermal conductivity. Samples may not be exposed to nickel alloys such as stainless steel.

Description:
Plastics laboratory needed for forensic analytical chemistry testing: UV Inhibitor testing for amount levels based on 2 baseline samples. Material is polyethylene netting.