Top

Incoming Marine Laboratory Test Requests

Contract Laboratory has received the following Marine Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Marine Laboratories to perform their Marine Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Marine laboratory that would like more information on these Marine projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Marine laboratory test requests. Please log in to see more.

17-01056

Marine

Materials laboratory needed for ASTM testing of newmarine coating to ASTM D4939 Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater and ASTM D5618 Measurement of Barnacle Adhesion Strength in Shear on materials

Closed

17-00698

Marine

Construction laboratory needed for materials and toxicity testing of naval thermal insulation testing to various standards including: NCD 1427 : SPECIFICATION FOR MINERAL WOOL MARINE BOARD FOR THERMAL AND ACOUSTIC INSULATION ON BOARD INDIAN NAVAL SHIPS

NCD 1433 : SPECIFICATIONS FOR ELASTOMERIC NITRILE THERMAL INSULATION FOR USE ONBOARD INDIAN NAVAL SHIPS

Closed

17-00582

Marine

Electrical laboratory needed for SAE external ignition testing of small marine electrical equipment for use in the marine industry to SAE J1171, External Ignition Protection of Marine Electrical Devices

Closed

17-00581

Marine

Electrical certification laboratory needed for SAE external ignition protection testing of a small electrical device for use in marine equipment to SAE J1171 External Ignition Protection of Marine Electrical Devices

Closed

17-00273

Marine

Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recommended practice providing design guidelines, test procedures, and performance requirements for 360 degree optical warning devices and selective coverage defined as any light that provides greater coverage then 40 degrees left-to-right but less than 360 degrees. Intended for authorized emergency, maintenance and service vehicles. Lighting tested from 5 degrees upward to 5 degrees downward.

Closed

17-00169

Marine

Marine Aquaculture company needs Agriculture laboratory needed for fish feed testing for presence of aflatoxin and heavy metals.

Closed

17-00144

Marine

Packaging laboratory needed for food contact surface testing for compliance to EU regulation (EN) 602/2004 testing of an aluminium wire to comply with food contact material.

Closed

16-02400

Marine

Marine Biology laboratory need for aquaculture testing as company sets aquaculture System (RAS) shrimp farm

Closed

16-02318

Marine

LONG-TERM TESTING: EPA GMP environmental laboratory needed for routine analysis of marine oil for two attributes:
1. EPA 1613 rev B for dioxins/furans
2. EPA 1668 rev A for PCBs

Closed

16-02283

Marine

Mechanical laboratory needed for vibration testing on marine engines.

Closed

16-02237

Marine

LONG-TERM TESTING Aquatic Toxicology Laboratory needed for toxicity testing of natural ingredients from marine microalgae

Closed

16-02079

Marine

Large company needs aquatic toxicology laboratory for Ecotoxicity study testing
1. OPPTS 850.1075 Fish Acute Toxicity Test, Freshwater and Marine
2. OPPTS 850.1010 Aquatic Invertebrate Acute Toxicity Test, Freshwater Daphnids
3. OPPTS 850.4500 Algal Toxicity
4. OPPTS 850.1085 Fish Acute Toxicity Mitigated by Humic Acid.

Closed

16-01820

Marine

Environmental Microbiology Laboratory needed for algae MIC testing on blend of two biocidal compounds (both are fairly water insoluble powders). The MIC testing has to be conducted on two species of algae. Plenty of labs can run the tests on bacteria and fungi, but haven't been able to find a lab that can run the testing on algal species.

Closed

16-01721

Marine

Microbiology laboratory needed for anti-algae testing for Foul Release system

Closed

16-01615

Marine

Europe laboratory needed for wastewater testing: five analyses requested:
1. BOD
2. TSS
3. Fecal Coliform
4. pH
5. Total chlorine

Closed

16-01505

Marine

Contract Laboratory needed for fatty acid methyl ester (FAME) analysis on approximately 72 marine plankton samples (on 47mm filters, in chloroform) and 72 copepod samples over 3 years (144 total).Would prefer a DB-23 column or similar to provide as much separation as possible in the C14-C22 range. Transesterification using sulfuric acid is preferred. For the copepod samples, TLC separation of FA esters and fatty alcohols may be necessary.

Closed

16-01182

Marine

Third-party laboratory needed for biodegradability testing of plastic fishing baits for fishing potentially to ASTM D6691Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum as the most appropriate test.

Closed

16-00813

Marine

Materials laboratory needed for ASTM boat cleaner testing on fiberglass and wood to determine it is effective and non-harmful in cleaning grease, oil, gas, scum and marine growth from boat hulls that comprise of fiberglass and wood and will not harm the surface as well. Our product is biodegradable and safe for the environment.

Closed

16-00812

Marine

Media company needed for nuclear particle analysis for ocean water from a Santa Monica beach.

Closed

16-00682

Marine

India geology laboratory needed for geochemical analysis for marine sediment trace elements, rare earth elements, major oxides for minerals

Closed

16-00443

Marine

Navigation company needs laboratory to ensure marine lighting navigation product is Intrinsically Safe.....

Closed

15-02154

Marine

Israel lab services needed for vitamin D analysis for the amount of vitamin D (2 & 3) in our marine micro-algal cell, which including extraction from the algal cells, and the distinction between the two types of vitamin D (2 & 3). 100 samples

Closed

15-01992

Marine

Marine Researcher needs analytical chemistry laboratory for water testing to determine the percentage of sunscreen released into brackish water by a high performance liquid chromatography analysis. Would your lab be able to do this?

Closed

15-01728

Marine

Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating materials with excellent properties
and are supplied in pipe sections and slabs. Other types available on request. Standard densities are
50 (PIR), other densities are also available.
PIR are used extensively on equipment and piping operating at lower temperatures in power stations,
marine vessels, petrochemical plants, oil refineries etc.
Specification
No. Properties Standard Unit Value(for
PIR)
1 Density ASTM D 1622 kg/m3 50 ± 1%
2 Compressive strength 10% deflection ASTM D 1621 kpa 300
3 Tensile Strength ASTM D 1623 kpa 280
4 Closed cell ASTM D 2856 % Min. 90
5 Thermal conductivity
After 5 months of stabilization ASTM C 518 Kcal/hm° C 0.020
6 Friability (@ 10 min.) ASTM C 421 % ? 9 ± 1
7 Water absorption ASTM D 2842 max % by vol. ?5
8 Water vapour transmission
At 23°C and 85% RH ASTM E 96 g/m2 @24 H 30 + 10
9
Dim. stability @70 deg C& 97% R.H.
Change in Thickness
Change in Length
Change in Width
ASTM D 2126 max change%
0.6
0.4
0.1
10 Fire Properties (flame spread) ASTM E84 max ? mm Max. 25
11 Operation Temperature ?? (°C) ?180 to +120
12 Hot Surface ASTM C 411 pass Pass

Closed

15-00659

Marine

Africa Pharmaceutical Laboratory needed for product development testing of cold water soluble tablets,

1. Bleach (white)
2. Detergent (Aquamarine Green)
3. Starch (White)
4. Antiseptic, para-chloro-meta-xylenol or PCMX Based (Translucent Brown or Amber) {Dettol Type}
Can we have a cost estimate for your firm to develop and supply us these products in Soluble Tablet Mouldable in bulk powder form. I am envisaging the items first come in test batches in 4 No 50 Litre holding container. We will also use these to complete our SONCAP and NAFDAC registration (Statutory Nigerian Product Quality Regulation Organizations). Subsequent supply will be the 4 products supplied in 200 Litre Drums transported in two 20' containers for starters and subsequent order increases as the market demand dictates.

Closed

15-00402

Marine

Environmental toxicology laboratory needed for marine sediment toxicology testing (Ecotox)?

Closed

15-00308

Marine

Analytical Chemistry Laboratory needed to perform the following analysis in an herbal extract Food Supplement: - Carvacrol, - Safrole - Isosafrole - Furocoumarines. Additionally I would ask which would be the method used (in house method or any validated method) and the leadtime for analysis. I would require a quote, individualized for each substance.

Closed

15-00240

Marine

Food Laboratory needed for food testing with validated methods for quantitative analysis of an herbal food supplement. Testing in 2 samples.
- Carvacrol
- Safrole
- Isosafrole
- Furocoumarines

Should you need any clarification, please do not hesitate to contact me.

Closed

14-01509

Marine

Marine Engineering company needs Egypt geotechnical laboratory for ASTM Testing: ASTM-BS soil and rock testing

Closed

14-01357

Marine

China toxicology laboratory needed for ocular safety study testing of biological based toy made from naturally ocurring marine luminous fluids. Acute testing and daily over 3 days

Closed

14-01036

Marine

Marine Science University Researcher needs Asia ISO Laboratory for ring testing for the standardization of ISO protocols that Korea submitted to ISO.

Closed

14-00994

Marine

Large oil company needs USA environmental toxicology laboratory for marine acute toxicity testing. Need drilling fluid components tested to comply with Indonesian regulations. Desired species is juvenile Penaeus monodon (tiger prawn). We have found an Indonesian lab, but are wondering if anyone in the US cultures and tests these organisms.
Acute Toxicity test 96 hours ? LC50 on penaeus monodon (tiger prawn juveniles) toxicity test as outline in DJM 537A/384/DJM1998-Guideline for Environmental Impact Assessment Offshore Drilling?

Closed

14-00793

Marine

Asia marine biology laboratory needed for HPLC and GC-FID lipid composition analysis of coral larvae

I can send the protocol if the laboratory has HPTLC and GC-FID

Closed

14-00729

Marine

Ph.D University Researcher needs India marine toxicology laboratory for fish toxicology study on accumulation of heavy metals in fish organs).

Closed

14-00637

Marine

Marine engineering laboratory needed for black beach sands physical and chemical testing in order to evaluate and determine the feasibility to install a processing industrial plant to separate and recover important elements contained in the raw material. Scope of Work The following is an outline of the tasks necessary to accomplish the objective mentioned above. Proposer may elaborate or suggest other determinations that can help DRG to elaborate the feasibility study. 1. Chemical analysis to determine a) Ilmenita (FeTiO3). b) Hematita (Fe2O3) c) Magnetite (Fe3O4) d) Rutile (TiO2) e) Gangue f) Others 2. Electronic Microscopic analysis; 3. Grain size distribution; 4. Grain Size distribution by density; 5. Mineralogical analyses; 6. Separation tests: a) Magnetic b) Gravimetric c) Flotation Looking forward to hear from you

Closed

14-00630

Marine

University Researcher needs toxicology laboratory needed for comet assay: fishes 20

Closed

14-00362

Marine

Biochemical manufacturer needs toxicology laboratory for quotation for a toxicology study for the plaguicide triazophos, it must include LD50 oral acute, LD50 dermal acute, LC50 inhalatory acute, dermal and eye irritation and dermal sensibilization. Also we need: Mutagenesis Testing, Reproductive Testing, Developmental Toxicology Testing Studies, Molecular Toxicology Studies, Neurotoxicology Testing Studies, Immunotoxicology Testing Studies, Aquatic and Marine Toxicology Testing Studies Mammalian toxicology Studies Genetic toxicology Testing Studies Ecotoxicology Studies. Please let me know conditions, prices and additional information.

Closed

14-00313

Marine

Middle East Marine Biology Laboratory needed for marine biology research: Phylogeny Two strains of Dunaliella (Chlorophyta) phytoplankton need to do phylogenetic analysis.

Closed

14-00297

Marine

Marine Biology Laboratory needed for larvae identification testing of all larval stages of copepods we are finding in a marine aquarium.

Closed

14-00172

Marine

United States Environmental Toxicology Laboratory needed for Pesticide Toxicology Study: OCSPP guideline 850.1055 -Estuarine/marine invertebrate embryo larval study

Closed

14-00034

Marine

Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushless alternator Alternators that are being installed on inboard gasoline engines must be certified to meet Coast Guard requirements for ignition protection. In order for the alternator to be certified, it must pass the testing procedure, Marine SAE J1171, laid-out by the Society of Automotive Engineers (SAE). Brushes inside the alternator cause some sparking when the alternator is charging. This is normal for any alternator.

Closed

13-01590

Marine

USA EPA Environmental Toxicology Laboratory needed for EPA Toxicity Testing: Chronic Whole Effluent Toxicity Monitoring Requirements: The Water Quality Standards of Mississippi require that all waters be free from substances in concentrations or combinations which are harmful to human, animals, or aquatic life (State of Mississippi, Water Quality Criteria for intrastate and Coastal Waters, Section II.4., Minimum Conditions Applicable to All Waters, page 3, adopted March 22, 1990). In accordance with such requirements, the permittee is authorized to discharge from outfall 001 only in accordance with the following conditions: (1) The permittee shall submit any existing toxicity data for review by the Mississippi Office of Pollution Control within 30 days of the effective date of this permit. (2) The permittee shall perform 7-day chronic, static renewal, definitive (a control and five effluent concentrations) WET tests in accordance with Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Water to Freshwater Organisms, (EPA/600/4-89/001) or Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, (EPA/600/4-87/028) or the most recent edition*. [WPC-1 Chapter Two Section VI] (i) Dilution water used for these tests shall consist of reagent grade water, defined as distilled or deionized water that does not contain substances which are toxic to the test organisms. For freshwater tests, dilution water shall consist of reagent grade chemicals or mineral water combined to make moderately hard dilution water according to Short-Term Methods for Estimating the chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms (EPA/600/4-89/001) or most recent edition*. For estuarine testing, dilution water shall consist of synthetic seawater or hypersaline brine combined to achieve a salinity of 20 parts per thousand according to Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms (EPA/600/4-87/028) or most recent edition*. These dilution waters will be deemed acceptable if the control organisms in the toxicity tests meet the minimum EPA criteria for chronic tests. n accordance with such requirements, the permittee is authorized to discharge from outfall 001 only in accordance with the following conditions: (1) The permittee shall submit any existing toxicity data for review by the Mississippi Office of Pollution Control within 30 days of the effective date of this permit. (2) The permittee shall perform 7-day chronic, static renewal, definitive (a control and five effluent concentrations) WET tests in accordance with Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Water to Freshwater Organisms, (EPA/600/4-89/001) or Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, (EPA/600/4-87/028) or the most recent edition*. [WPC-1 Chapter Two Section VI] (i) Dilution water used for these tests shall consist of reagent grade water, defined as distilled or deionized water that does not contain substances which are toxic to the test organisms. For freshwater tests, dilution water shall consist of reagent grade chemicals or mineral water combined to make moderately hard dilution water according to Short-Term Methods for Estimating the chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms (EPA/600/4-89/001) or most recent edition*. For estuarine testing, dilution water shall consist of synthetic seawater or hypersaline brine combined to achieve a salinity of 20 parts per thousand according to Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms (EPA/600/4-87/028) or most recent edition*.

Closed

13-01333

Marine

Environmental Simulation Laboratory needed for marine environmental testing: IEC Testing to IEC 60945, Maritime navigation and radiocommunication
equipment and systems -
General requirements -
Methods of testing and required test results. Need to perform environmental testing on marine gyrocompass products. Test needed:
a) Rain test (IEC 945:1994, 4.4.8);
b) Conducted interference test (IEC 945:1994, 4.5.3);
c) Radiated interference test (IEC 945:1994, 4.5.4);
d) Acoustic noise test (IEC 945:1994, 4.5.7).

Closed

13-01320

Marine

Manufacturing company needs marine toxicology laboratory Marine Pollutant testing on one of our products. Can you quote cost, turn around time and required sample size

Closed

13-01250

Marine

Central America environmental laboratory needed for environmental chemistry testing and Water quality testing (nutrients, heavy metals, etc); Sediment sampling (nutrients, heavy metals, etc); Biologic components (coli, etc); Marine and Freshwater samples; Taxonomy

Closed

13-01186

Marine

US GMP or ISO certified laboratory needed for analytical chemistry testing: astaxanthin analysis by HPLC UV, however it has required 100's of grams of dried biomass- we would like a method that only uses mgs. there are methods in the literature but our content is low percent less than 1 so it may be a tricky analysis to isolate since there are many different pigments in the sample as well as lipids, carbohydrates etc.

Closed

13-00698

Marine

India Marine Toxicology Laboratory needed for cytotoxicology testing of marine fish crude skin mucus/spine crude sample full of toxicology assay and enzyme assay and cytotoxic assay

Closed

13-00688

Marine

Mfg or of electrical conductors/cables & Electric Meter needs physical laboratory nad electrical laboratory for electrical testing and physical testing of marine electrical cables. of Marine-cable as required for that sector. trial type-test, routine-test & acceptance-test purpose.

Closed

13-00418

Marine

Florida Biophysical laboratory needed for Hydrothermal degradation testing of aquatic plants. Want to know the nutrient and mineral content that can be removed, time and energy required to do this on a large scale.

Closed

13-00367

Marine

USA Safety Laboratory needed for safety testing a selection of marine life vest safety whistles in accordance with ISO 12402-8 for dB level (100 dB(A) minimum required)and frequency (2+/- 1 kHz typical).

Closed

13-00343

Marine

Asia ASTM Mechanical Laboratory and Physical Laboratory needed for (1) Heat built-up testing
Test standard: ASTM D623 method A
(2) Damping Coefficient test
Test standard: ASTM D5992
Testing condition: Mean (compression)- 4mm, Amplitude- 0.8mm,Frequency- 1 Hz
(3) Fatigue test
Test standard: ASTM D5992
Testing condition: Mean (compression)- 4mm, Amplitude- 0.8mm,Frequency- 1 Hz, Cycle-700
(4) Creep Test
Test standard: ISO 8013
(5) Hysteresis Test
Test standard: Please advice

We prefer all above tests in compression mode.

Closed

Submit Marine Testing Requests for Marine testing and Marine Scientific Research