ContractLaboratory.com can assist your company, refinery, oilfield, power
station, organization, academic institution, or government agency in
outsourcing independent, commercial contract oil, gasoline, petroleum,
and petrochemical laboratories to do all your routine and non-routine
Oil, Gasoline, Petrochemical, Biodiesel, Alternative Fuels, Hydrocarbon
and Petroleum testing, surveys, exploration, analysis, experiments and
research studies
Oil and Petroleum Testing and Research Services
Contract Laboratory can help you with all your Oil and Petroleum testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs including:
AOCS Biodiesel
API Gravity of Crude Petroleum Products
ASTM
Acid Number
Acid Number
Acrylates
Acrylic Crazing
Alcohol
Alkalinity
Amines
Aniline Point
Anti-Icing Additive
Aromatics Olefins
Arsenic Content
Ash from Petroleum Products
Asphaltenes
BOCLE Lubricity
BTU
Benzene Content
Biodiesel Feedstock Evaluations
Biodiesel Fuel Blend Stock for Distillate Fuels
Borehole Stability Analysis
Bromine Index
Bromine Number
Burning Quality of Kerosene CAEAL
CFD Analysis
Carbon Residue
Carbon Residue
Catalyst Evaluation
Cetane Number
Characterization of Crude Oils
Cloud Point
Cloud Point
Cold Cranking Simulator
Cold Filter Plugging
Comparative Motor Oil
Computational Fluid Dynamics (CFD)
Condensate Analysis
Condensates Composition
Congealing Point of Petroleum Waxes
Copper Corrosion
Corrosion
Crude Oil Assays
Demulsibility Characteristics
Depentanization of Gasoline and Naphthas
Detailed Hydrocarbon Analysis
(DHA)
Determination of the Aromatic Content and Polynuclear Aromatic Content
Water Separability of Petroleum Oils and Synthetic Fluids
Water Tolerance
Water compatibility
Wax Content of Petroleum Oils and Asphalts
Weathering Constant
pH
Alkalinity or Acidity
Type of Oil and Petroleum Products
Contract Laboratory can assist your company, academic institution, government agency or organization in outsourcing contract laboratories to perform testing, analysis, and product development for many Oil and Petroleum finished products, processes, systems, in-process materials, raw materials and components such as:
petroleum
crude oil
gasolines
fuels
grease
heavy distillates
liquified gas
methane
transformer oil
natural gas
petrochemicals
diesel fuels
asphalt
potash
paraffin wax
paraffins
light distillates
propane
air compressor fluids
aromatic hydrocarbons
saturated hydrocarbons
kerogen
unsaturated hydrocarbons
mineral oil
edible oils
shale
sedimentary rock
oil reserves
solvents
source rock
refrigeration compressor fluids
jet fuel
aviation fuel
air compressor fluids
petrol
coal
biofuels
synthetic fluids
synthetic oils
caustic soda
jet fuel
wax
distillate fuel oils
recycled vegetable oils
gear lubricants
butane
isobutane
lease condensate
sandstones
liquified petroleum gases
lubricants
ethane
ethylene
propylene
isobutylene
oil waste
naphtha
transformer oil
pet coke
kerosene
paraffenic lubricants
midgrade gasoline
premium gasoline
electrical insulating fluids
pentanes
unfinished oils
petrochemical solvents
aviation fuels
BOB (Blendstock for Oxygenate Blending)
residuals
carbon
clarified oil
slurry oils
low sulfur diesel
reformulated gasoline
biodiesel
hybrid fuels
alternative fuel sources
fuel oil
Oil and Petroleum Test Methods and Standards
Contract Laboratory can help with testing, analysis, assays, evaluations, examinations, inspections and certifications to different Oil and Petroleum test methods, standards, procedures or specifications.
EPA Method - Soil Screening for Petroleum Hydrocarbons by Immunoassay
EN 228: - Specifications for automotive petrol
ASTM D323 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ASTM D322 - Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
ASTM D97 - Standard Test Method for Pour Point of Petroleum Products
ASTM D95 - Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D94 - Standard Test Methods for Saponification Number of Petroleum Products
ISO 8217:2017 - Petroleum products - Fuels (class F) - Specifications of marine fuels
ISO 91:2017 - Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
EN 228: - Specifications for automotive petrol
ISO 8691 - Petroleum products Low levels of vanadium in liquid fuels Determination by flameless atomic absorption spectrometry after ashing
JIS K 2170 - Reclaimed oil
JIS K 2201 - Gasoline for industrial purpose
JIS K 2201 - Gasoline for industrial purpose
JIS K 2204:2007 - Diesel Fuel
JIS K 2205:1991 - Fuel oil
JIS K 2206 - Aviation gasoline
JIS K 2211:2009 - Refrigerating machine oils
JIS 2213:1983 - Turbine Oils
JIS K 2215:1993/AMENDMENT 1:2006 - Internal combustion engine oils
JIS K 2233:2006 - Non-petroleum base motor vehicle brake fluids
JIS K 2234:2006 - Engine antifreeze coolants
JIS K 2235:1991 - Petroleum waxes
JIS K 2240:2007 - Liquefied petroleum gases
JIS K 2242:2012 - Heat treating fluids
JIS K 2246:2007 - Rust preventive oils
JIS K 2252:1998 - Petroleum products -- Testing method for reaction
JIS K 2258-1:2009 - Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 1: Reid method
JIS K 2265-1:2007 - Determination of flash point -- Part 1: Tag closed cup method
JIS K 2265-3:2007 - Determination of flash point -- Part 3: Pensky-Martens closed cup method
JIS K 2269:1987 - Testing methods for pour point and cloud point of crude oil and petroleum products
JIS K 2270 - Crude petroleum and petroleum products -- Determination of carbon residue -- Part 1: Conradson method
JIS K 2272 - Crude oil and petroleum products -- Determination of ash and sulfated ash
JIS K 2510:1998 - Lubricants -- Determination of rust-preventing characteristics
JIS K 2536-3:2003 - Liquid petroleum products -- Testing method of components Part 3: Determination of aromatic components by gas chromatography
JIS K 2536-6:2003 - Liquid petroleum products -- Testing method of components Part 6: Determination of oxygen content and oxygenate compounds by gas chromatography and oxygen selective detection
ASME B31.4 - Pipeline Transportation Systems for Liquids and Slurries
ASTM E1943-98(2015) - Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
ASTM F1693-17 - ASTM Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
ASTM F2204/F2204M-16 - Standard Guide for Describing Shoreline and Inland Response Techniques
C1343 - 16 - Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
ASTM F2798-09 - ASTM Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ISO 16911 - Petroleum products -- Estimation of net specific energy of aviation turbine fuels using hydrogen content data
ISO 3648 - Aviation fuels - Estimation of net specific energy
ISO 20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
ISO 4636 - Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ISO D5185 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D803 - Standard Test Methods for Testing Tall Oil
ASTM D483 - Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
API 4709 - Risk-Based Methodologies for Evaluating Petroleum Hydrocarbon Impacts at Oil and Natural Gas E&P Sites
ASTM D1500 - Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM F1693 - Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
ASTM F1209 - Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
ASTM F1231 - Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
ASTM F1210 - Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
NACE 21415 - Potential Effects of Upstream Additives on Refinery Corrosion and Fouling
IEC 62701 - Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgear
ISO 3734 - Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method
ISO 8068 - Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines
ISO 20844 - Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
ASTM D4304 - Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
ASTM D971 - Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ISO 12500 - Filters for compressed air - Test methods - Part 2: Oil vapours
ISO 3016 - Petroleum and related products from natural or synthetic sources - Determination of pour point
ISO 2719 - Determination of flash point - Pensky-Martens closed cup method
IEEE 980 - IEEE Guide for Containment and Control of Oil Spills in Substations
API 10.6 - Manual of Petroleum Measurement Standards Chapter 10.6 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
API 10.3 - Manual of Petroleum Measurement Standards Chapter 10.3 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
API 13l - Recommended Practice for Laboratory Testing of Drilling Fluids March 1, 2009 - API
ASTM D2549 - Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
ASTM D189 - Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D2274 - Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D2710 - Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
ASTM D5182 - Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
IEEE P2740 - Selection and Installation of Electrical Cables and Cable Systems in Hazardous (Classified) Locations on Oil and Gas Land Drilling Rigs
ASTM D2269-10(2020) - Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D4007-11(2016)e1 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4006-16e1 - Standard Test Method for Water in Crude Oil by Distillation Active Standard(Latest Version) Last Updated June 1, 2016
ASTM D3230-19 - Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D6377-20 - Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx?(Expansion Method)
ASTM D7623-20 - Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D7622-20 - Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D8150-17 - Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
API - Tank Inspection, Repair, Alteration, and Reconstruction
ASTM D1298-12b(2017): - Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D7739-11(2020) - Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
Oil and Petroleum Certifications, Licenses, and Accreditations:
Depending on your Oil and Petroleum products, you may need third-party Oil and Petroleum laboratories or research facilities with specific certifications, licenses or accreditations.
American Petroleum Institute API
Universal Oil Products Laboratory Test Methods (UOL)
ASTM
IP
JFTOT
DIN
ISO
EN
EPA
ASTM D6751
CAEAL
California Air Resources Board (CARB)
API
EOLCS
ANSI
Army Corps of Engineers
AOCS
Defense Standard 91-91
MIL-DTL-83133E (JP8)
MIL-DTL-5624U (JP5)
AASHTO
IP
Caption: Petroleum Testing
Caption: Oil Testing
Need Oil and Petroleum Testing or Scientific Research Services?
We can help with all your Oil and Petroleum lab testing and scientific research needs! Call 1-855-377-6821 or
