Contract Laboratory has received the following Telecommunications Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Telecommunications Laboratories to perform their Telecommunications Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Telecommunications laboratory that would like more information on these Telecommunications projects, please visit our registration page or call toll us free 1-855-377-6821.
USA Optical Laboratory needed for mirror specular reflectance testing service.
1. Measure absolute specular reflectance at 45° AOI over the spectral range 430 - 1000nm for 5 locations on mirror
2. Part is a first surface mirror
a. Size: 35 x 26 x 1.25 inches
b. Weight approx. 30 lbs
c. Backing material has screw holes for handling and mounting
USA Mechanical Laboratory with qualifications needed for ANSI / SCTE-60 Testing AMERICAN NATIONAL STANDARD / Society of Cable Telecommunications Engineers Test Method For Interface Moisture Migration moisture migration test over several (maybe 10 samples) RG-6 coaxial cable.
West Coast USA Analytical Chemistry Laboratory needed for debris identification testing from debris on coaxial tube off of an antenna . noted that there was a large amount debris located in it. We collected an amount of this debris for analysis. Would like to find out exactly what is.
Physical Laboratory needed for material strength and galvanized quality testing of telecommunication steel tower. Following items are included for testing. 1. Nut and bolt (grade 8.8 & 4.6 ) 2. 'L' angles Please give your clear instruction for how we take your service. Thanks
Electrical Laboratory needed for Electrical Testing for dish Antenna Antenna Gain & Efficiency C/N, NM, BER values for antenna. 3dB Beam width & F/D ratio. Radiation Pattern-Elevation & Azimuthal plance for V&H over 12 & 30 degrees. Environmental test reports-Salt Spray test, Powder Coating test, Wind Loading test etc.
ISO 17025 Laboratory needed for optical communication testing 1-SDH/SONET tests
1-1-bit eror rate
1-2-eye pattern analysis
1-2-8-peak to peak jitter
1-2-11-optical modulation amplitude
2-1-tempreture-humidity cyclic test
3-optical loss tests
3-5-polarization dependent loss
3-6-polarization dependent return loss
3-7-wavelength dependent insertion loss
3-8-wavelength dependent return loss
4-4-optical signal-to-noise ratio
4-5-polarization dependent gain
5-3-polarization mode dispertion
Large Dish Antenna Manufacturer in India needs Electrical Laboratory to conduct the Logo Ink Reliability Test: The test is to be carried out as per IEC 60068-2-5, Edition 2.0, 2010-04. Procedure B is to be used which specifies 20 hrs of irradiance and 4 hrs of darkness per cycle. The no of cycles to be used is 21 as per IEC 60068-2-78 which specifies severity. The test has to be conducted on Dish Antenna which is used for DTH reception with an approximate; a) Size: 730mm (L) x 650mm (B) x 100mm (D) b) Max Weight: 2.5Kgs
Electrical laboratory needed for UL 508 or IS/IEC testing of Low Voltage Disconnector used in telecom SMPS application.
These single pole dc contactors are rated for DC Current of 1000A , 12000A, 1500A & 1800A at 54vdc. Coil Voltage is also 54 vdc.
These need to be tested as per UL 508 ( subject UL 1801) standards OR Equivalent IS/IEC standards.
1. Overload test.
2. Endurance tset.
3.Dielectric voltage test.
4. Temperarture rise test.
Hence, please confirm the below.
1. Total testing charges.
2. Duration required for completion of testing.
3.Number of samples required for testing.
Electrical laboratory needed for Electro magnetic compatibility survey testing. The survey environment includes the comms systems, microwave facilities and emissions, television and radio transmitters/repeaters, radar systems., computer equipment and accessories, traffic control devices, magnetometers, electric motors, controls, x-ray equipment, power substations, aircraft, motor vehicles, high voltage cables and power lines.
The survey will basically identify all emitting devices (with the frequency range DC to 1 Ghz being assessed) or those that may be adversely effected by the surrounding electromagnetic environment. The survey will be along sections of the Dubai Metro Light Rail Transit System)
This will be a pre-construction survey.
GMP Compliant lab to perform the following: Full Monograph Testing (individual and total) for the following items:·,Magnesium Stearate·,Maltodextin·,Polyethylene Glycol·,Silicon Dioxide,·Stearic Acid·,Croscarmellose Sodium,,Dibasic Calcium Phosphate·,Lactose Monohydrate·, Specific Rotation for Ephedrine HCl·,Diphenhydramine HCl Organic Nitrogenous Bases for a pharmaceutical company
assess the androgenic activity, in a quantitative fashion, of a single steriod with the trivial name tetrahydrogestrinone(THG) in a pilot scale study. Either an aquatic organism model or rodent model would appear adequate to provide the information desired but other potential testing types will be considered such as in-vitro receptor binding studies. The study should compare the relative androgenicity of THG to a reference compound such as testosterone
Pharmaceutical Laboratory needed for Residual Moisture Content analysis (e.g. Karl-Fisher analysis ) on lyophilized cake. All excipients in the formulation safely handled under BL 1 conditions. Fast Turn Around Times a must. Laboratory should be in the contiguous United States.
Bioanalytical Laboratory needed for Vitamin detection on Fetal Bovine Serum. Following is a list of vitamins and detectable units:
Vitamin B-12 pg/mL
Folic Acid ng/mL
Vitamin B-6 ng/mL
Thiamin B-1 ng/mL
Vitamin H Biotin pg/mL
Riboflavin B2 ng/mL
Vitamin A Retinol ng/mL
Vitamin C ng/mL
Microbiology Laboratory needed for microbial analysis SB 3112. The test material consisted of only the bacterial spores at a count of 55 x 107 cfu/ml. The tests were run in compliance with the following protocols: 1 USEPA FIFRA;GLP Standards 40 CFR 160 2 USEPA TSCA 40 CFR 792 3 Org. Economic Coop. and Dev. Principles of GLP, Annex 2, C(97)186 4 Japan Ministry of Ag, Forestry & Fisheries, Notification No. 59 Noshan 3850, Director-General of Agricultural Prod. Bureau, 10 Aug 84
Preclinical toxicology laboratory needed for Cytotoxicity studies: MEM Elution Sample Amount: 120 cm2 or 4 grams Irritation: Intracutaneous Reactivity (ISO) (w/2 extracts) Sample Amount: 240 cm2 or 8 grams Sensitization: Magnusson-Kligman (w/2 extracts) Sample Amount 600 cm2 or 32 grams (6 samples minimum) Sensitization: Local Lymph Node Assay: Sample Amount 400 cm2 or 20 grams