Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Toys Laboratories to perform their Toys Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Toys laboratory that would like more information on these Toys projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Product Safety Laboratory needed for dog toy testing to the following test standards: American national standard ASTM F 963?07; Standard Consumer Safety Specification for Toy Safety, and
European standard EN 71-3; Safety of Toys ? Part 3: Migration of Certain Elements.
Company selecting textile products ( toy like) that require testing for the Canadian market There are 2 textile products that appeal to be used by children under 3 years old Also an infant textile bib with velcro. Testing includes Textile Flammability Regulations (SOR/2011-22) No flame retardant PBB Prohibition of Certain Toxic Substances Regulations, 2012 (SOR/2012-285) Toys Regulations (SOR/2011-17) i hope to hear from you. thank you! Diana
Analytical Chemistry Laboratory needed for benzene testing of toys to potentially develop program going forward
Toxicology laboratory needed for GLP toxicity testing such as acute oral toxicity test for new plastic polypropylene baby toys.
India Product Safety Laboratory needed for RFQ on European Commission Directive Testing required for Pencil Sharpner as per EN 71-1:2014. Safety of toys - Part 1: Mechanical and physical properties.
Children's Arts and Crafts company needs India Toxicology Laboratory for Toxicology Testing: LD50 testing on modeling clay for children
Toy Laboratory needed for toy certificaiton testing of 100k plush electronic toys known for our global market access.
USA CPSC Accredited Consumer Products Safety Laboratory needed for Toy Testing: children's plush toy tested for safety and compliance.
USA Consumer Products Safety Laboratory needed for product safety testing of baby pacifiers and baby toys (ideally ages 4 months and up) to be tested for safety and any other tests needed to be within all necessary standards/requirements.
Time frame is very flexible (sooner or later is okay)
Consumer Produsts Safety Laboratory needed for ASTM children's book safety testing: Phthalates Testing- ASTMF963 and 16 CFR 1303. complies with law on phthalates. surface coating for lead will not exceed 100ppm and substates will not exceed 200ppm
USA Toy laboratory needed for puzzle testing to test a 10pc Puzzle. 8 shapes, top, and bottom.
USA Product Safety Toxicology Laboratory needed for Toy Testing: toxicological assessment (TRA) for Plastic toy to be sold in USA. the plastic is "well known" in the professional literature as non-toxic and safety.
China toxicology laboratory needed for ocular safety study testing of biological based toy made from naturally ocurring marine luminous fluids. Acute testing and daily over 3 days
East Coast USA Product Safety Laboratory needed for toy safety testing services of a plush toy using unconventional stuffing. This stuffing, visco elastic memory foam, is commonly found in memory foam mattresses. We want to confirm that this product can be safely used in toys. We only want to test the safety of the stuffing, not the entire toy. Please send me an email about about the services and the prices your firm offers. Email is the preferred method of communication. Thanks!
USA electronics laboratory needed for battery testing of remote controlled helicopters
Consumer Products Laboratory needed for CSPC toy testing: plush toy product tested for CSPC and CA65. What type of tests will be required? Also, what would the price be for the tests? The toy is manufactured in China and will be imported. Thank you for any help you can give me.
Toy distributor needs consumer products safety laboratory for toy product safety testing including phthalate testing there have been many reports of high levels of phthalates and other dangerous substances of competitor product which we suspect are not suitable for children use. those products dont have any safety mark or any other EU certificate.
California Toy Laboratory needed for toy testing of small electronic children toy. Ages 3 and up
California Consumer Products Safety Laboratory needed for consumer products safety testing of Baby activity mat
CANADA consumer products laboratory needed for consumer products safety testing Testing baby bibs, need a report for flamabilty testing as per health canada
Toy Laboratory needed for Consumer Product Safety Testing: CPSC Toy Testing of pproximately 10 different small thinly stuffed plush baby doll/ animal dolls made of soft fabrics
Canada Toy importer needs USA toy laboratory for toy testing of toys imported from Africa.
Japan Toxicology Laboratory needed for Toxicology Testing: toxicological risk assessments (TRA)on chemical substances of toys or components of toys
Large Toy Manufacturer needs Toxicology Laboratory for Toy Testing: Toxicology Testing Toxicological Risk Assessment (TRA) Based on the ingredients or bill of substances to evaluate or assess any hazardous substances involved on the materials. The requirement should be referenced to EU REACH,SVHC,2009/48/EC, Washington Children's Safe Product Act or California Green Chemistry Act, etc.
Toronto importer needs Consumer Products Laboratory for diaper testing for safety chemical composition, etc.
Certified Toy Laboratory, Consumer Safety Laboratory needed toy testing center that is certified to test baby toys
China Toy Laboratory or Consumer Safety Laboratory needed for consumer safety certification testing to Japanese Standards Certify Baby stroller for Korea and Japan for mandatory standards KATS 2010-677Japanese Standard CPSA 0001-2009Advice in mandatory regulations and standards to comply with. Test and certify according above.
HOKLAS accredited laboratory needed for ASTM Testing to ASTM F2613-13,Standard Consumer Safety Specification for Children's Chairs and Stools . Please reply urgently.
South Korea and Europe Toy laboratories needed for toy safety testing : - Test Name : EN 71 Part 1 - Safety of toys - Mechanical and physical properties - Test Name : EN 71 Part 2 - Safety of toys - Flammability - Test Name : EN 71 Part 3 - Safety of toys - Migration of certain elements (19 elements) Please provide me the quotation if you perfom this test.
Asia or USA Toy consumer products laboratory needed for toy teating: Physical & mechnical test,Flammability test (ISO8124 's test method) and Toxic element-general and toluene testing per Chile 's requirement.
Los Angeles consumer products toy laboratory needed for toy safety testing :paint safety test
USA Textile Laboratory needed for textile flammability testing to export childrens apparel to the UNITED STATES
Florida Toy Laboratory needed for plush toy testing for: Flammability, toxic, tension, torque, small parts, Phthalates and age grade Thanks
USA Consumer Products Laboratory needed for Consumer Product Safety Commission CPSC Toy Testing: prototype testing plush toy/stuffed animal, potentially for use by children of any age.
California Consumer Products Safety Laboratory needed for consumerproduct safety testing. Tested Required for 18" Oscillating Fan 1. Polarized Plug 2. Lack of Grounding 3. Degrading of Wire Insulation during testing 4. Absence of adequate Thermal Protection 5. Use of plastic Enclosure that did no Self-Extiguish 6. Undersized Power Cord estimated at 24AWG.
Canada Consumer Products Laboratory needed for Consumer Products CPSC testing on a cloth diaper according to CPSC guidelines
Consumer Products Safety Laboratory needed for Consumer Product Safety CPSC Testing of toy jewellery
California Product Safety Laboratory needed for ASTM Testing. Testing the safety-compliance of Engineered Wood Fiber intended for playground use to 1)ASTM F1292-092)ASTM F19513)ASTM F2075-10a4)lab-recommended flammability test
Toy Laboratory needed for Toy Safety Testing: ASTM Testing of plastic toys: 1. ASTM F963, Standard Consumer Safety Specification for Toy Safety Testing 2. ISO 8124 Safety of Toys Testing (Part-1-III) 3. IS 9873 PHTALATES content in toys(Part-1-III) 4. EN 71 Toy Safety Testing Please quote your rates for the same.
Consumer Products Safety Laboratory needed for car crash test safety testing of infant head and neck support approved by CPSC, Consumer Product Safety Commission needs Car Crash Safety Testing.
Europe Consumer Products Laboratory needed for consumer products testing of Baby diapers: pH testing, absorption testing: Baby diapers Absorption Liquid during not more than 10 seconds
India Toxicology Laboratory needed for Pesticide Testing to WHO Pesticide Evaluation Scheme WHOPES standard CIPAC/4682/m
PHYSICAL LABORATORY NEEDED FOR COLOR FADING TESTING ON 2 SAMPLES OF FRP BENCH STRIPS.
Consumer Products Safety Toy Laboratory for board game safety testing required to satisfy toys r us, Walmart, Target (all large dept. stores)
Consumer Products safety Laboratory needed for consumer products safety testing of Baby beanbag.
Canada Consumer Products Laboratory needed for toy safety testing of toys and fabrics used in children with special needs
Canada Consumer Product Safety Laboratory needed for Cosumer Product Safety Testing of stuffed animals - 5 samples.
USA Materials Laboratory needed for ASTM Testing adn FDA Testing of bioplastic materials : 1.Bio-content analysis - ASTM D6866 2.Food Packaging Contact Safety - FDA 178 3.Biodegradability - ASTM 6400 ASTM 4.As well as another biodegradability test for our durable bioplastic. This hould be some kind of controlled biodegration test that lasts between 4 to 6 months. Bioplastics used for food contact, apparel, interior automotive, toys, pet products, consumer products d6866 dfa 178 astm- 6400 as well as a controlled biodegration test lasting between 4 to 6 months
Consumer Products Safety Laboratory needed for ASTM toy testing of muff/handbag/plush animal to be tested as per the ASTM F963-08 standards. How much does this cost and how long will it take?
Europe CPSA Toy Laboratory needed for CPSA Certification Testing of soft toys and board games to comply with US certification
US Consumer Products Laboratory needed for ASTM Testing of Playground Rubber Safety Surfaces to ASTM C1549 - 09 Standard Test Method for Determination of Solar Reflectance Please advise as to how much the average cost of test will be and how we would go about having the test completed.
West Coast USA consumer safety laboratory needed for toy testing toy that consists of many small plastic parts with different solid colors. The components are made out of two types of plastic materials. 1. Thermmo Plastic Elastomer (TPE) and 2. Polycarbonate. I would like to get the toy tested and certified for material safety and any other type of safety requirements required in the U.S.A.
Consumer Products Laboratory needed for EPA, CPSC, ASTM, ISO Testing: EN71-3 /HCL EXTRACTION 2h/FILTERATION / ICP-MS
California FDA Consumer Product Laboratory needed for FDA and CPSC Testing of gummies, toys
Eastern USA environmental, consumer products laboratory needed for ASTM Testing of playground mulch to astm f 2075-04 and astm f 1292 standards
Physical Laboratory needed for flammability testing of childrens toy to flammability standard is AS/NZS ISO 8124.2 section 4.1.
USA Consumer Products Safety Laboratory needed for CPSA Product Safety Testing of ribbon product about 18 inches long and about 3/8 inches wide. It will be manufactured in China and will primarily be sold to the youth market.
MEXICO CONSUMER PRODUCTS SAFETY LABORATORY NEEDED FOR TOXICITY TESTING OF WATER COLOR TABLETS TO CONFORM TO ASTM D4236
West Coast USA CPSA Consumer Product Safety Laboratory needed for ASTM Lead Testing for lead a child safety for children 3 years and older There will be 7 samples
Texas consumer products safety laboratory needed for consumer safety testing of musical, non-electronic toy prototype that I would like to have analyzed for safety design. I dont need to test for toxins yet, just to see if my design is worth pursuing.
Toy consumer products safety laboratory needed for ASTM Testing to Test random sample of stuffed plush from import for China for ASTM American Society for Testing and Materials
USA or Asia Toxicology Laboratory needed for Toxicological Risk Assessment of liquids, putties, pastes, gels, and powders that are found in common consumer products. This will be an on demand service based on our customer requests.
Consumer Products Safety Laboratory needed for safety testing (Choking hazard)of a handmade wooden toy (no paint).
Asia AANZ BS EN 747 Consumer Products Safety Laboratory needed to test sample bunk bed for safety and issue compliance certificate
USA Consumer Products Safety Laboratory needed for consumer products safety testing of toys to bring to market.
USA CPSIA, ASMT and EN-71 Consumer Product Safety Testing of 10 inch plush toys for Lead, Cadmium, Chromium, Barium, Antimony, Arsenic, Mercury, Selenium and other toxic chemicals.
USA Consumer Products Safety Laboratory needed for C02 / Oxygen level testing in our Human Spheres. Determine preliminarily whether a defect is present in product. Whether defect rises to the level of substantial risk of injury to children under section 15(c) of the FHSA, 15 CA 110051.
USA Consumer Products Safety Laboratory needed for C02 / Oxygen level testing in our Human Spheres. Determine preliminarily whether a defect is present in product. Whether defect rises to the level of substantial risk of injury to children under section 15(c) of the FHSA, 15 CA 110051.
China Consumer Products Safety Laboratory needed for product safety testing 13000 toys in 12 different colors. The toy has a painted wooden ball attached. I need to test the paint on this ball to make sure it is safe and legal to sell in the USA and complies with all necessary standards.
I need to know the entire cost to perform this testing, and the time it will take to complete the testing.
The toy is being produced in yunhe city, in the Zhejiang province, in China. I would prefer to test at a lab in China to ensure all the products are safe and compliant before shipping to the USA. In the quote I need the entire cost, especially if expedited shipping to a lab is necessary.
USA Consumer Products Safety Laboratory needed to perform toxicity testing and provide an MDS sheet for the product.
USA FDA Consumer Products Safety Laboratory needed for testing rubber sunglasses for: Bisphenol A Phthalates Lead
For polycarbonate lenses: UV testing
For product box: Lead
Canada / USA Consumer Products Safety Laboratory needed for ASTM F963 toy testing a children's toy - book package with an OID pen ton ensure it meets all ASTMF963 requirements and 16 CFR 1303 regulations.
Asian Materials Laboratory needed for testing rubber flooring products (rubber tiles for playground) in accordance to BS EN1177 standard
USA Consumer Products Safety Laboratory needed for ASTM testing of home playground equipment as per astm f963-08 astm f1148 and 16cfr.
Canada Consumer Products Safety Laboratory needed to have samples of toy plastic soldiers tested to comply with toy safety regulations. Plastic soldiers are for ages over 3 years.
India Consumer Products Safety Laboratory needed for Toy testing as per ISO 8124 or ASTM F963 or EN71 required for 7 toys.
USA Consumer Products Safety Laboratory needed for toy certification testing for toy product.
USA ASTM Consumer Products Safety Laboratory needed for flammability, choking, hazardous materials testing on toys.
Czech Republic Wooden Toy Company needs USA Consumer Products Safety Laboratory for testing and CPSA certificates.
USA Consumer Products Safety Laboratory needed for testing a mostly wooden table game with plastic paddles, wooden ball and plastic jacks, approx. 1.5 inches. No paint.
USA Manufacturer of stuffed made animals and plush products needs Consumer Products Safety Laboratory for testing as follows: Paint & Surface Coating Heavy Solubles Phthalates Physical & Mechanical Tests
Japan Consumer Products Safety Laboratory needed for toy testing (soft items for children from 0-5 years old)
USA Consumer Products Safety Laboratory needed for CPSC testing on writing products and curriculum for sale to schools and home schools. Most items are simply printed materials and need tested for materials and packaging. Some items are toys and need tested to adhere to CPSC regualtions
Eastern USA Consumer Products Safety Laboratory needed for Lead testing (Pb)in Paint and Other Similar Surface Coatings
Consumer Products Safety Laboratory needed for product safety testing on an educational product that is being developed.
Consumer Products Safety Laboratory needed for toy testing a new line of handmade toys that are being imported. We would like to assess what ages they are suitable for and labeling requirements.
Eastern USA Consumer Products Safety Laboratory needed to test baby shampoo, conditioner, lotion, diaper cream and bubble bath.
USA Consumer Products Safety Laboratory needed for product safety testing in accordance to ASTM - (2) samples.
Australia/New Zealand Consumer Products Safety Laboratory needed for evaluation of Children's sleepwear items in accordance to AS/NZS 1249:2003. Need to determine which category (1 - 4) they would be tested to.
Southern California Consumer Product Safety Laboratory needed for toy evaluation of corrugated plastic play houses + stickers so we know which tests need to be done.
USA Product Safety Laboratory required for testing toys for phalates, lead, flamability, and choking hazard
CSPC Product Safety Laboratory needed for product safety testing of childrens clothing. I am starting a clothing line that is somewhat unique and would like to have a safety assessment done to ensure compliance with cpsc guidelines for products intended for use by children under the age of 12.
India Product Safety Laboratory required for testing and providing lab certificate required for customs clearance on plush toys to be imported to India from China. Please provide price details.
Western USA consumer product safety laboratory needed for toy testing of toy blocks to place on the market to sell
IRAN ISO PRODUCT SAFETY LABORATORY NEEDED FOR ISO/IEC 17025 TOY TESTING CONFORMING TO IRAN STANDARD OR EN STANDARD"
Canada Consumer Product Safety Laboratory needed for toy safety testing for "stuff doll" cloth material.
Canada Consumer Product, Toy Certification Testing and certification of toy (doll) manufactured in the Philippines to meet federal safety requirements."
USA Certification Laboratory needed for certification testing of product imported from China that has already been certified for Canada. It is a 100% plush product with audio mechanism for ages 3-10 yrs. old.
Colorado consumer product safety laboratory needed for ANSI/NFSI B101.1 Validation Testing of the slip resistant characteristics of a slip resistant floor for indoor children's play area
USA CPSA Consumer Products Laboratory needed for CPSC-CH-E1003-09 testing for lead levels in a children's products. digestive - lead paint/durable child furnitureScrape paint off and digest it.
Consumer Product Safety Laboratory needed for ASTM Toy Safety Testing ASTM F963 of Musical toy incorporating stretch cord,some elastic straps, metal rods.
Toy Consumer Products Safety Laboratory needed for testing eco-toys for American Standards Accreditation.
Consumer Products Toy Laboratory needed for testing plastic toy for children ages 2-10
USA, KOREA, CHINA ACLASS CONSUMER PRODUCT SAFETY LABORATORY NEEDED FOR DOLLS TESTING COMPLYING WITH U.S. CONSUMER PROTECTION SAFETY COMMISSION REQUIREMENTS.
California Product Safety Laboratory required for the following testing: astm f963 physical test flammability f96 total lead and soluable heavy metal f963 lead in substrate cpsia phathaltes cpsia
Toy company needs California Consumer Product Safety Laboratory for product safety testing of children's stuffed toys.
USA (New York) ASTM F963-08 Product Safety Laboratory required for testing toys for sharp points
Materials Laboratory needed for testing school resource for children with communication difficulties and there are many aspects to the product as I will need the whole pack testing. Please give me some idea on prices and lead times.
Product Safety Testing Laboratory needed for toy testing for certificate of conformity to import of toys based in India .
Eastern USA TSCP & CPSIA Materials Laboratory needed for Product Safety Testing for toxicology, chemistry on Stuffed Plush Toy, Storybook, Backpack for plush toy.
childrens product that needs a certificate of compliance. It Toysa and Consumer Products Safety Laboratory needed to test children's dress-up outfit for certificate of compliance for joining toys r us company.
Midwest USA Product Safety Laboratory needed for Flammability Testing of plush toy materials
USA Consumer Products Safety Laboratory needed for Testing plush toy for safety and age appropriateness, material make-up
California Consumer Product Safety Laboratory needed inkjet paper balloon media and plastic pieces to be in compliance with CPSIA and anything that relates to toy safety.
Children's toy manufacturer needs north american FDA, GMP, ASTM and ISO Product Safety Laboratory for deformulation of food items, and other products including arts and crafts, remote controlled planes, / Testing include deformulation,toxicology,microbiology,environmental
US Toy Manufacturer needs Toy Laboratory for ASTM Testing of various Boardgames to astm f963, 16 cfr 1500, 16 cfr 1303.
New Toy Manufacturer needs Washington DC Consumer Products Laboratory for product safety Stuffed-plush stuffed toy with clothes. Need all tests to comply with current regulations for stuffed animals.
California Pet Toy Manufacturer needs consumer safety laboratory for toxicity testing to obtain levels of toxicity and safety of pet toys fabric toxicity if ingested by pet
Colorado USA ASTM Toy Manufacturer requires USA Materials Laboratory for ASTM Testing to obtain Certificate of Compliance for the toy.
Europe CE EN 71 Materials Laboratory needed for product safety testing EN 71 Parts 3, 7.
California CPSC Materials Laboratory required for product safety testing for toy manufacturer; need to test product for lead content.
USA - Colorado CPSC HR4040 Materials Laboratory needed for product safety testing; phthalates in plastic toys.
Materials Laboratory needed for product safety testing for plush toys. I would like to get pricing - the toys are on my web-site @ www.towelpal.com
USA FDA Materials Laboratory needed for product safety to test lead paint in small toy.
USA Electronics, Consumer Products Safety Laboratory needed for testing safety of new childrens plastic toybox which contains electrical components.
Canada Toys Laboratory needed for ASTM product safety mechanical testing for conformity to the canadian toy safety
US Consumer Products Laboratory needed for Toy safety testing for safety standards for lead, cholking & flamability. Product is a trolley, able to covert into backpack as well. With an attached plush animal.
Midwest USA Consumer Products Laboratory needed for Toy Testing for compliance to ASTMF 963 and 16 CFR 1303
US Consumer Product Safety Toxicology Laboratory needed for safety testing of new materials in Dog toys to make sure that they are safe for the dog.
USA Consumer Product Safety Laboratory needed for ASTM F63 testing of plush children's toy bears
New Zealand or China Toy laboratory needed for CE Marking testing for soft toy in a plastic ball that need CE certification for european market
Toy Product Safety Laboratory needed to test toys using an XRF for lead and all metals and plastics. Will ship toys to lab, they will test and send report and ship back.
USA Consumer Product Safety Lab needed for Strangulation/Suffocation Testing of Stuffed plush cat with long tail which could possible strangle or suffocate if a child's head get stucks under it
USA Laboratory needed for product safety testing of colored pigment sand for child product safety (ingestion hazards and allergic).
ASTM Safety Testing midwest USA lab needed to test infant table for safety and no sharp edges. We also need it tested to make sure that it is a non toxic toy.
Egypt product safety lab with GMP & ISO certifications needed for complete toy safety testing, inclu. toxicology and product safety.
USA (pref. New England) ASTM certified product safety lab needed for safety testing of infant toys: lead/toxic chemical content, strength, etc.
Product Safety Lab needed for ASTM and CPSA testing of plush dolls for product safety within the scope of the standards set by the CPSA, CSPA and the ASTM F963
Toy Product safety laoratory needed for product safety testing of toy (for ages 3 yrs to 5 yrs) materials are fabric, foam, plastic hook, ink, tear resitance film)tests known at this point are: 1. test for banned substances 2. test for restricted substances 3. flame retardant 4. drop test 5. no sharp points or edges 6. toxic and irritant substances 7. bite test 8. other tests that may be necessary for this product category "activity kit".
Consumer Safety Laboratory needed for European Standard EN-71 Testing - Lead Flammability, PVC Testing, Small objects, Torque/Tension Test
Product Safety Laboratory needed to test simple printed plastic card for toy ages 6+ to global industry standards.
Analytical Chemistry laboratory needed to certify that our soft doll has been tested by an independent lab for lead (both surface coated and embedded) as well as phthalates (a plastic softener that has already been banned in California and Europe.) We are requiring that the toys be both lead free and phthalates free.
Product Safety laboratory needed to test Harness - Plush toy pull test for fabric, buckles and structures.
Toy Product Safety laboratory needed for testing toy doll for phthalates and lead (both surface coated and embedded).
Toy importer looking for laboratory in Canada for ASTM testing of toys on a regular basis for general compliance under Canadian safety standards.
Product safety toy testing laboratory required to test imported toys (dolls, doll furniture) for lead.
Toy manufacturer needs ASTM product safety testing of giant contruction toy product. Recertification needed for ASTM standards as well as European Union CE standards.
Product Safety Laboratory needed for ASTM CPSC safety testing on wooden toys imported from Eastern Europe and get certification proving that they meet the CPSC safety standards
Product Safety Laboratory needed for testing multiple toys for general product safety including lead-paint testing.
Media organization needs product safety laboratory for testing a few different toys using the same methods employed by Health Canada under the Hazardous Products Act testing.
Child Product Safety Laboratory needed for CE Product Safety Testing for Aluminum Die Cast riding toy. This ride on pedal tractor toy is made from aluminum Die Casting. It features 4 Rubber tires, chain driven with 2 sprockets, (similar to bicycle) and is steerable. Finish is powder coat painted. We have had our tractor riding cycles tested in the past and have passed for ages 3 and up. We will supply metal specs and paint specs. All pinch point areas have have addressed.
Product Safety Laboratory needed for product safety testing of coloring kit-includes colors, brushes, and erasing pads, the erasing pads are the one at question: a plastic package contains 32 cotton erasing pads, soaked in a chemichal liquid
Product Safety Laboratory needed for EN-71 Toy Safety & Organic Chemical Compounds Testing for a 1" wide polypropylene webbing (tape)that will be used on toys.
Consumer Product Safety Laboratory needed for testing stuffed toys to US product safety requirements
Analytical Chemistry Laboratory needed to complete prototype of children's modeling clay to ASTM Standards.
Product Safety Laboratory needed for EN and ASTM Product Safety testing including for finished Wooden Toys and small Wooden Arts & Crafts item, approx. 12" length, approx. 10 unique items, for ages 4 and up. Analytical Chemistry, mechanical, physical testing includes: ASTM F963-03 Heavy Metals / ASTM F963-03 Mechanical Hazazards /ASTM F 963-03 Flammability EN71 Pt.1 Mechanical Hazards (1-7)EN71 Pt.2 Flammability EN71 Pt.3 Heavy metals
Product Safety Metallurgical Laboratory needed for children games ASTM testing for total lead contact and heavy metal, conform to ASTM F963-03 and 16 CFR 1303
PRODUT SAFETY LABORATORY NEEDED FOR ASTM TESTING (ASTM F963) A TOY LINE MADE OF WOOL FELT STUFF WITH POLYESTER.
Product Safety laboratory needed for toy testing soft doll and related doll clothing for flamability, small parts etc.
USA Product Safety Toy Laboratory needed for ASTM child safety testing of planks (maple wood blocks) for small parts, sharp points and edges, durability, age grading, labeling requirements, etc.
Product Safety laboratory needed for EN 71 safety of toys, part 3 migration of certain elements EN 71 3 1994 materials is a powder coating, paint to be used on a play system. the test HCL to test coating metals amount.
Product Safety laboratory needed for ASTM testing (ASTM F963) for wool felt poly-filled toys.
CPSC product safety testing for testing Metal in children jewlery toys and make-up for kids that we sell in capsules.
ASTM Product safety laboratory needed for projection release test on a rubber band shooter.
Product Safety Laboratory neded for ASTM testing and CPSC testing of stuffed toys. The todays are made of 100% wool felt with polyester fill and are 15"
Toy company needs product safety laboratory for testing it's developed toys manufacturer in China prior to import in China. Toy company develops play environments.
Product Safety Laboratory needed for EN71 testing (various types of resistance & safety testing) of toys.
-ASTM F1148 PERFORMANCE TESTING FOR TOYS: -LABELING AND INSTRUCTIONAL REVIEW -BEARING ATTACHMENT -Hazardous Products (Toys) -Mechanical Hazards Testing (Includes: Drop Test; 10 -Push-Pull Test; Sharp Edges/Points, Small Parts; Noise Level, etc. -Flammability of Fabrics -Cellulose Nitrate -Heavy Metals Analysis of Applied Surface Coatings
toys manufacturer needs laboratory to perform product safety testing that meets a TIA Request
Spanish toys manufacturer company whose products have successfully passed the CE European regulations safety tests needs it's toys ( plastic bracelets and pony beads) ASTM tested to sell products in USA. Please, could you tell me where I can send the samples for testing. Please indicate how long it takes to have the result tests and How much is the cost the analysis per samples?
EN & ASTM Product Safety testing for Puppet Toys with vinyl painted head, fabric and fur body for ages 5 and up. Analytical Chemistry, mechanical, physical testing includes: 16 CFR 1303 Lead content, ASTM F963-03 Heavy Metals 16 CFR 1500 / ASTM F963-03 Mechanical Hazazards 16 CFR 1500.44/ASTM F 963-03 Flammability EN71 Pt.1 1998 Mechanical Hazards (1-7)EN71 Pt.2 Flammability EN71 Pt.3 Heavy metals