Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Laboratories to perform their Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a laboratory that would like more information on these projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Preclinical Contract Research Organization neededed for Influenza vaccination efficacy study in a specific strain of KO mice. Vaccination would be followed by challenge with influenza virus. Plasma should be collected before vaccination and at 4 weeks. This should be followed by challenge with the Influenza virus and two weeks of survival curve .Vaccination would be IM , as in humans and infection intranasal.
Material analysis laboratory needed for the following testing on plastics:
Environmental Cycle test after 50 cycles according to PV 2005
Lightfastness according to PV 1303 after 3 period of exposure
Grey scale level, color and grain according to color combination, color consistency according to VW 501 90, resistance to open air weathering VW 50185: without complaints, temperature resistance and operable from -40ºC to 90ºC, emission behaviour according to VW 501 80, and flammability according to TL1010
Food microbiology needed for microbial analysis including identification of probiotic bacteria and yeast and CFU analysis for bacteria and yeast in food product.
Physical chemistry laboratory needed for OECD testing to OECD Test No.123 Partition Coefficient (1-Octanol/Water): slow-stirring method or shake flask method.
Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV stability testing in accordance with ES ISO 4892-2 , performance at elevated temperatures is in accordance with ACI440.3R-04 Section B.6 Accelerated test method for alkali resistance of GRP bars, and suitability, Durability,
Packaging Laboratory needed for Medical Device Package Design Qualification Testing of a UN 4G Fiberboard Box With 47 x 40 x 1.5-mil poly Red Bag with twist tie and knotted closure This package is not certified for shipment by air. Box Information: 32# ECT (38-26C-38) / D/C Special Design style / ?C? flute / glued joint / Extended design carrying handles / Auto bottom / interlocking top Part Number: 17 x 14 x 19 Outer Dimensions: 18? x 15 ¼? x 20 1/8? (24 ¼?) Inner Dimensions: 17 ¾? x 15? x 19 5/8? Manufacturers Joint: Glued with a 1.25? inside tapered flap Tare Weight: Box: 1.8 lbs. Basis Weights
FDA GLP ISO-17025 bioanalytical laboratory needed for characterization of collagen scaffold medical device including amino acid analysis, quantification of Collagen I, DNA, GAG and lipids, protein assay, and trypsin resistance. residue analysis, hydroxyproline determination,
Materials Laboratory needed for testing on a steel grade silica ceramic blanket.
Flammability to ASTM F 1462.
Thermal Conductivity to ASTM C518-19983.
Thermal Shock Resistance to ASTM D-30324.
Chemical Sustainability to ASTM D-6455.
Mineral Wool Thermal Insulation to IS 3144:1992
Heavy Metals Resistance to Biological Catching (Hazardous Substance)
Nutraceutical / Dietary Supplement analytical chemistry laboratory needed for LONG-TERM TESTING - monthly quality control testing of dietary supplements and active elements distilled from aromatic and medicinal plants, for MSDS 1- Appearance 2- Loss on Drying 3- Melting Point Range 4- Residue on Ignition 5- Organic Volatile Impurity 6- Heavy Metals 7- Purity 8- Identification 9- Assay (Please send price / delay for analysis, knowing that there will be more than three analyses per month).
Molecular Biology / Bioanalytical Laboratory needed for up to three university-based experiments involving human cell lines:
Experiment #1: Test up to 5 human cell lines (i.e. liver, kidney, etc...). Formalinize these cell lines in order to have a bank ready to be used. Then culture peripheral blood stem cells,apply the different formalin treated cells into the growth media, and determine what occurs. I am looking to determine if differentiation is stimulated toward the cell lines that were added. Is there inhibition or is there no reaction?
Experiment #2: Culture peripheral stem cells, add various growth factors (ex. neupogen), and determine if cell expansion is stimulated
Experiment #3: Growth of autologous stem cells on an autologous feeder layer (cells and feeder layer from the same patient). Looking to find what numbers
Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing, with test parameters according to:
- Test procedure: C
- Test temperature: 40 °C
- Test duration: 240 h
- IP69K rating (DIN 40050-9 standard extending the IEC 60529)
- ENV 008C chemical testing
Food analytical chemistry laboratory needed for dairy testing: silver ion thin layer chromatography testing followed by GC/MS testing of a milk sample to quantify total fatty acid content including CLA (C18:2), two major isomers (c9, t11 and c10, t12), and omega fatty acid ratio (6:3).
Physical laboratory needed for DIN Testing of automotive parts to 5.9 Solar Radiation Test as per DIN 75220, D-OUT-F Test duration 1 cycle = 240 hrs. Test chamber temp = 42 oC, RH 65 % Radiatlon intensity 1000 W/m2 Visual evaluation 5.10 Dust Test - execution as per ISO 16750-1, resp. ISO 20653 - Preparing of the test samples; without sealing and without producing of testing 1 cycle: - Swiriing of dust in chamber for 6s - Dust deposits for 20 min - Total of 20 cycles - Type of dust: Arizona dust A2 Operation mode 3.2 for 5 min (necessary to specify operating voltage) - Evaluation - dismounting of sample and check of dust ingress (necessary to specify) - 1 sample tested in 1 load
Medical device company needs clinical product safety laboratory for in-vivo, in-vitro and microbiology testing of disposable feminine pads including:
Surface device testing with just contact to the skin or breached/compromised surface (due to labial contact). We will do a limited exposure (less than 24 hours) testing.
Microbiology testing as pads release oxygen and slightly acidify the pH within the pad once blood reaches our patented powder. We want to see if it has any effect on microbes.
Measure the pH after blood has entered the pad to see how the pH is affected after blood has entered.
Amount of oxygen released per pad, the amount of CO2 absorbed per pad and the amount of humidity absorbed per pad?
Food laboratory needed for ISO spice testing of saffron to ISO standards ISO 3632specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers. and ISO 3632-1-2010) . Please specify the cost/test; quantity of saffron required; and turn around time once the lab receives the material.
Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:
1. SWL loading IEC 61537 Cl. 10.2-10.8 (and Annex D.1) (to residual deflection measured by instruments with a resolution of 0.5mm or better and a precision of 0.1 mm or better in all range of the equipment per cl. 5.9).
D.1 states Trays mesh, solid, perforated to use load distribution plates that are rectangular, 120 mm by 40mm with a tolerance of 1mm.
Food importer needs ISO 17025 food laboratory for imported oil certification testing of food containing oil derived from beef including: Insoluble impurities not exceed than 0.15% in weight? for the beef oil used. (tested by accredited method). 2. accredited method or not? Please provide a quote as well as specify how long will it take for the test result? (this is quite in a hurry, we need the result soonest) - How much sample needed?
URGENT TESTING FDA GMP Medical device preclinical laboratory needed for product safety and toxicity studies of a plastic dental aligner. Risk Assessment in regards to human exposure (oral, dermal, inhalation) is requested for a dental aligner and support-removal media. The dental plastic aligner is thermoformed onto a 3D printed mold that was previously soaked in our support-removal media.
R&D company needs virology laboratory for disinfectant efficacy testing against multiple viral strains: Avian Adenovirus Adenoviridae Group 1 2 Avian Adenovirus Adenoviridae Strain EDS 127 3 Avian Coronavirus Coronaviridae 4 Birnavirus Birnaviridae 1 5 Chicken Anaemia Virus Circoviridae 6 Enterovirus Picornaviridae 7 Herpesvirus Herpesviridae AlphaHerpesVirus 8 Herpesvirus Herpesviridae GammaHepesVirus 9 Orthomyxovirus Orthomyxoviridae H5 10 Orthomyxovirus Orthomyxoviridae H7 11 Orthomyxovirus Orthomyxoviridae H9 12 Paramyxovirus Paramyxoviridae APMV-1 13 Pneumovirus Paramyxoviridae A 14 Pneumovirus Paramyxoviridae B 15 Pneumovirus Paramyxoviridae C 16 Pneumovirus Paramyxoviridae D 17 Poxviru Poxviridae 18 Reovirus Reoviridae S1133 19 Reovirus Reoviridae 1733 20 Reovirus Reoviridae 2408 21 Reovirus Reoviridae ERS 22 Retrovirus Retrovirida
Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.
1) Copper conductor, Mica tape, XLPE insulation, LSHF Bedding, Galvanized SWA and LSHF final Sheath.
3) Copper conductor, Mica tape, XLPE insulation, LSHF Bedding, AWA and LSHF final Sheath. This cables will be tested as per ( BS 6387 Cat C W & Z ).
Pharmaceutical laboratory needed for ICH, FDA, and USP testing on OTC sunscreen API and finished topical products including: 1) stability test on our finished sunscreen products for the claimed shelf life of 3 years as per the US FDA requirement, 2) preservative challenge test as per the USP on finished sunscreen products, 3) assay and purity of the following active raw materials: avobenzone [INCI name : Butyl Methoxydibenzoylmethane] 2. homosalate 3. octocrylene 4. octisalate [INCI name : ethylhexyl salicylate] 5. oxybenzone [INCI name: benzophenone]
Please provide cost of each test, turnaround time estimate, and sample quantity required for assay and purity testing of each active API.
Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including: Raw material tests as per ASTM D4976 + ASTM D5203, density, melt flow rate, elongation at break, tensile strength, UV resistance, stress crack resistant, impact test as per SASO-GSO 1863.
Medical Device preclinical contract research organization CRO needed for insulin characterization with or without infusion through medical device: (1) High molecular weight proteins (insulin aggregates), (2) Preservative content (m-cresol), (3) Impurities, (4) Bioidentity (blood glucose response in rabbits), (5) Zinc content and (6) insulin recovery.
Analytical chemistry laboratory needed for test method development and specific testing of sleep related quick release and extended release coated dietary supplement including dissolution testing to mimic digestion. Please also quote for heavy metals and microbiology testing.
Analytical laboratory needed for EPA OPPTS biodegradation or photodecomposition of this compound in soil for compliance with EPA OPPTS 835.2410 Photodegradation on Soil. Please specify sample size needed, shipping requirements, special label requirements, cost estimate, and turn-around time.
Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers , emissometer, emittance and ASTM C1549, Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer. Company from Turkey.
University researcher needs analytical chemistry laboratory for formulation study and expiration dating of natural oil based mosquito repellent.
Food laboratory needed for sugar syrup testing for rheology studies for analyzing surface tension, viscosity and elasticity profiles for various sugar syrups with added food gums using the following methods:
Wilhelmy plate method for surface tension is desired.
Cone and plate or falling plate rheometry
Cosmetic laboratory needed for glococorticoids testing in a skin cream. Quote needed.
Food analytical chemistry laboratory needed for 2 types of bean flour testing for
phytic acid tannins trypsin inhibitor alpha-amylase inhibitor polyphenols oligiosaccharides (raffinose, stachyose, verbascose) lectins (phytohemagglutinin) saponins complete nutritional analysis including amino acid profile
If possible, we would like a price for each individual test.
Thank-you so much for this information.
Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:
1. Leaching test - Based on EN12457 - 2 Part 2 and EN ? 12506
2. Sulfur test - Based on ISO 4689-3 : 2004
3. Corrosion test - Based on LPR method (Linear Polarization Resistance Method)
Automotive laboratory needed for ASTM D5500 (Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation) or D5598 (Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling) testing of a liquid. Quote and turnaround time needed.
Large Biologics Product company needs GLP Toxicology laboratory needed for Human Health and Safety Testing as follows: Acute oral infectivity and toxicity, Acute pulmonary infectivity and toxicity, Intravenous infectivity, Acute Dermal toxicity, Irritation, Dermal Irritation Study, Genotoxic Potential for 16 samples, including 4 studies for End Products, and 12 studies for bacterial actives.
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recommended practice providing design guidelines, test procedures, and performance requirements for 360 degree optical warning devices and selective coverage defined as any light that provides greater coverage then 40 degrees left-to-right but less than 360 degrees. Intended for authorized emergency, maintenance and service vehicles. Lighting tested from 5 degrees upward to 5 degrees downward.
Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additional polymer (which may also be a polyacrylate), water and at least two more non-polymeric materials.
Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines:
- Purity (according to ASTM D6806)
- Acidity (according to AHRI 2008 Appendix C to 700-2014 Part 1, to be confirmed by the 2BTP producer)
- Water content (according to AHRI 2008 Appendix C to 700-2014 Part 2)
- Nonvolatile residue (according to AHRI 2008 Appendix C to 700-2014 Part 3)
- Suspended matter or sediment (visual inspection during Nonvolatile residual test)
- Presence of Stabilizers (FTIR spectrum analysis to be performed)
Food Laboratory needed for cabbage testing including: nutritional analysis, pesticide, heavy metal and microbiological contamination analysis of 2 varieties of cabbages we sell in Mongolia. Specific tests include -Pesticide contamination (How many kinds of pesticides do you test, and how much?)-Nutritional analysis, including moisture, carbohydrate, dietary fiber, ash, vitamin C, B6, folic acid, manganese and potassium (Do you have any other recommendation and how much are these tests?)-Heavy metal contamination (Cd, Pb, Hg) also how much? -Microbiological contamination.
Microbiology Laboratory needed for ASTM or ISO biodegradability testing to ISO14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide or ASTM D5338 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection, .
OECD compliant and EPA GLP Environmental toxicology laboratory needed for large suite of toxicology tests on pesticide.
OECD 401/20/23/25 Acute Oral Toxicity
OECD 402 Acute Dermal Toxicity
OECD 403 Acute Inhalation Toxicity
OECD 404 Acute Dermal Irritation
OECD 405 Acute Eye Irritation/Corrosion
OECD 406/29/42 Skin sensitisation
OECD 407 Repeated Dose 28-day Oral Toxicity Study in Rodents
OECD 408 Repeated Dose 90-day Oral Toxicity Study in Rodents
OECD 410 Repeated Dose Dermal Toxicity: 21/28-day Study
OECD 471 Bacterial Reverse Mutation Test
OECD 473 In Vitro Mammalian Chromosome Aberration Test or 474 Mammalian Erythrocyte Micronucleus Test
It is also likely that following successful testing we will need to move to other standard toxicity, metabolism and environmental studies. Appreciate co
Packaging laboratory needed for complete packaging testing of 7 SKU's of products including: material testing, and benchmark packaging Bottles: Drop test, seepage test, topload test Caps: Capping force test, torque test Labels: Fadeometer test, chamber test, resistance test - Rigids: Bottles, Caps, Jars - Flexibles: Labels, Films - Paper-based: Corrugates, Cartons - Others: Pumps, Tubes
It would be great if you could share your credentials outlining: - Specific tests you offer in the above categories - Turnaround time - Quotations
If you could give me a call today, I am happy to discuss our requirements in more detail.
Food laboratory needed for milk powder quality testing :
Heat Instability: Alcohol Test > 75% IDF: 133:1981
Clot on boiling test Negative K.S.S 150:1982
Objectionable matter Minimal/25g MAF Dairy Division
Foreign matter Absent/25g MAF Dairy Division
Inhibitory substances 0.005 IU/ml Max MAF Dairy Division
Antibiotics Negative MAF Dairy Division
Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components 1. Leaching test - Based on EN12457 - 2 Part 2 and EN - 12506 2. Sulfur test - Based on ISO 4689-3 : 2004 3. Determination of resistivity : ASTM G57-06 4. Corrosion test - Based on LPR method (Linear Polarization Resistance Method)
GLP metallurgical laboratory needed for AOAC 2006.03 standard or EPA6010/6020 testing for Aresenic, Cadmium, Cobalt, Molybdenum, Nickel, Lead, Selenium, and Zinc.
Also, need Hg analysis using EPA747A or 7471A or 7473 or 7474. Digestion for EPA methods: 3050B/3010/3020/3051.
Nutritional laboratory needed for labeling claims testing of vitamins: qualification and quantification testing of vitamins in a premix powder to meet labeling claims for the following: Niacinamide 20 mg D-Calcium Pantothenate 5 mg Cyanocobalamin 4.97 mcg Pyridoxine HCl 5 mg Caffeine, anhydrous 150 mg Inositol 30 mg Taurine 1001 mg Serving size is 1340 mg with a maltodextrin filler.
Food microbiology laboratory needed for microbiological standard plate count (SPC) testing and Coliforms testing per RAWMI standards: raw milk shall not contain zoonotic pathogens including: Salmonella spp., E. coli 0157:H7, Campylobacter spp., and Listeria monocytogenes. Target: a rolling three month average of less than 25 coliforms per ml raw milk; target: less than 15,000 per ml raw milk. Also, water test potable well water showing bacteria counts including coliform.
Large petroleum company needs Industrial chemistry laboratory for ASTM petrochemical testing to ASTM D8031-16 for acid number of terephthalic Acid (TA) by automatic potentiometric titration.
Medical devices laboratory needed for ISO Testing of medical breathing tubing to ISO 5367 Annex A, Annex C, Annex D, Annex E, Annex F, testing of tubing: ANNEX A: RESISTANCE TO AIR FLOW ANNEX D: LEAKAGE ANNEX E: INCREASE IN FLOW RESISTANCE WITH BENDING ANNEX F: COMPLIANCE ANNEX C: SECURITY OF ATTACHMENT OF ADAPTER TO BREATHING TUBE
Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 Permeability Coatings and Films Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7 2. Liquid water permeability: Test method EN-1062-7 3. Acid Resistance . 4)SRI
LONG TERM TESTING FDA cGMP microbiology laboratory needed for USP water testing of water for injection based on USP monograph for Sterile Water for Injection and the European Pharmacopeia (Ph. Eur.) monographs for Water for Injections in bulks and sterilized Water for Injections. Also need extractable volume and uniform volume.
Blood testing laboratory needed for analyzing samples for the following contents: Interleukin-1 beta (IL-1ß1), Erythrocyte sedimentation rate (ESR), High-sensitivity C-reactive protein (hs-CRP), Serum osteocalcin: measured using the ELSAOSTEO radioimmunoassay (IRMA), Serum hyaluronic acid (HA): measured using the Pharmacia HA Test radiometric assay,, Serum Keratin sulphate: measured by ELISA , Transforming growth factor beta (TGF-ß).
Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbiology testing:
ASTM D7661-10, Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms for compliance with latex and polyisoprene condoms.
ISO 10993-5 Biological Evaluation of Medical Devices-Part 5: Tests for in vitro cytotoxicity
ISO 10993-10 Biological Evaluation of Medical Devices-Part 10: Tests for irritation and skin sensitization
ISO 10993-11 Biological Evaluation of Medical Devices-Part 11: Tests for systemic toxicity
United States Pharmacopeia, National Formulary General Chapter <88>: Biological Reactivity Tests, In Vivo
USP <51> Antimicrobial Effectiveness Testing
USP <61> Microbiological Examination of Nonst
ISO 17025 Analytical chemistry laboratory needed for cleaning product testing: phenoxyethanol analysis (Ethylene glycol phenyl ether ) for active ingredients:- Octyl decyl dimethyl ammonium chloride - Dioctyl dimethyl ammonium chloride- Didecyl dimethyl ammonium chloride- Alkyl benzyl dimethyl ammonium chloride- Ethylene glycol phenyl ether
Microbiology laboratory needed for testing microbial content of grape seed extract capsules. The following information is needed: aerobic microbial content, total combined yeast and mold content, enterobacteria count, escherichia coli count, salmonella count, and staphylococcus aureus count.
Virology laboratory needed for conducting antiviral activity (HCV) screening using muteins targeted against replicons. Muteins: 3a genotype wild type, 1b Y93H genotype, 3 Y93H genotype , 1b L31V genotype, 1b L31M genotype, 3 A30K genotype.
Antiviral activity against replicons of genotype 1a, 1b or not.
Clinical Research Laboratory needed for clinical research of cosmetic grade two grades of Bentonite on Human skin: 1) Oil absorption properties of Bentonite on skin 2) Ability of Bentonite to remove Toxins, Pollutants, Pathogens from skin 3) Revitalization of tired skin 4) How bentonite is able to reduce pimples by absorbing excess sebum, reduces size of pores 5) Improve skin color after using bentonite and get natural glow
University Researcher needs Clinical laboratory for identification testing for human blood (or serum) of the following substances:1.Acrylamide2.Vinyl Bromide3.Dibromoethylene4.Fluoride Vinyl5.Styrene 7.8 Oxide6.1,2,3-trichloropropane7.Tris (2,3-dibromopropyl) Phosphate8.Benzene9.Ethylene Oxide10.Polychlorinated biphenyls (PCBs)11.PCB dl and Total12.1,3- Butadiene13.Pesticides Not Arsenical14.Diazinon,15.Glyphosate16.Malathion17.Parathion18.TetrachlorvinphoIf that is possible, please send us a quote for 100 tests.
Materials laboratory needed for screw DIN Testing: 1) Screw Type: DIN7500 PE M3X8 Properties Class: 8.8 Surface protection: DIN EN ISO9227-NSS 360h Cleanliness requirement: TV-02023-EN SKII (166mm2)
2) Screw type: DIN7500 PE M4X10 Properties Class: 8.8 Surface protection: DIN EN ISO9227-NSS 360h Lock washer type: DIN128A M4 Lock washer material: A2 Cleanliness requirement: TV-02023-EN SKII (356mm2)
Clinical Contract Research Organization needed for Herpes Simplex Virus HSV 1 clinical study of proprietary dermatology solutions for applying formulation for Herpes Simplex Virus HSV 1 treatment for pre episode and after sore formation resulting rapid healing without postulation and scarring
Research and Development Laboratory needed for product development studies for the development of new concentrated granulated fertilizer material processed from zeolite material (sand) into concentrate with the highest possible purity (using magnetic separation), and then from concentrate produce granulated fertilizer/material.
Research laboratory needed for optimization study on ozonators used for water treatment to define the optimal ozone amount for treatment of customer's water including chemical analysis of water to calculate how much ozone we need to decrease quantity of needless organic and inorganic compounds to acceptable level.
Materials laboratory needed for DIN fastener cleanliness testing to Screw Type: DIN7500 PE M3X8Properties Class: 8.8Surface protection: DIN EN ISO9227-NSS 360hCleanliness requirement: TV-02023-EN SKII (166mm2)2. Screw type: DIN7500 PE M4X10Properties Class: 8.8Surface protection: DIN EN ISO9227-NSS 360hLock washer type: DIN128A M4Lock washer material: A2Cleanliness requirement: TV-02023-EN SKII (356mm2)Please advise.Thanks.
FDA GMP analytical chemistry laboratory needed for impurities testing and HPLC analysis of Dahurian larch extract [mixture of flavonoids, featuring taxifolin (dihydroquercetin)] on Dihydroquercetin content by using HPLC method. The analysis of the impurities could be also required.
Pharmaceutical microbiology laboratory needed for environmental monitoring for antibiotics against surface sample swabs: Nafcillin Sodium, Ampicillin Sodium, Ampicillin Sodium and Sulbactam Sodium, Penicillin G Potassium,Piperacillin Sodium and Tazobactam Sodium.
LONG-TERM TESTING: Renewable ENergy company needs Environmental laboratory for environmental monitoring stack analysis on regular interval Source emission (PM, SO2, NOX), HCL, CO, NH3, TOC, HF, CD Th their compounds, Hg and their compounds, Sb As Pb Cr Co Cu Mn Vi their compounds, Dioxins and Furans.Kindly provide detailed quotation for sampling and analysis for the same.Looking for positive and quick reply.