Top

Welcome!

ABOUT US

FIND LABORATORIES

LABORATORY REGISTRATION

SUPPORT

Email

Need Metals Testing or Scientific Research?

Find Laboratories for all your Metals Testing or Scientific Research!

Submit Metals Laboratory Test Request

Metals Laboratory Test Requests

Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Metals Laboratories to perform their Metals Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Metals laboratory that would like more information on these Metals projects, please visit Register Laboratories or call toll free 1-855-377-6821.

16-02343

Coatings and Films

Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ASTM B695, ASTM B571, and CTM 541

Closed

16-02310

Automotive and Motor Vehicle

Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in (3) places on (3) Cold Rolled sheet metal parts with compound surfaces; Size of Part ranges from 120 mm diameter X 100 mm in Length.

Laboratory Needed

16-02303

Gems and Gemstones

On site analysis needed in India of rock deposit for precious and semi precious metals and for gem stone.Black Rock with quartz bands seen in our field, so need to analyze the geo physical properties.

Laboratory Needed

16-02295

Metals and Alloys

Metallurgical Laboratory needed for XRD on metal samples to solid (cast) form with high ferroalloy content to determine the carbides and alloy phases that gave my hardfacing materials their hardness.

Closed

16-02280

Manufacturing and Production

UK Company needs a laboratory to test Adipic Acid as a raw material for to be used in manufacturing for: 1. Purity 2. Heavy metals residue (to the ppm and ppb levels) 3. Other impurities such as byproducts from the manufacturing process (succinic acid, Caproic acid ? etc.) 4. Volatile and semi-volatile impurities. (by LCMS for example)

Laboratory Needed

16-02275

Occupational Health and Industrial Hygiene

University needs industrial hygiene laboratory for solid waste management worker monitoring testing: Hair and nail samples for: HEAVY METALS (LIKE MERCURY, CADMIUM, ARSENIC. CHROMIUM LEAD)

Laboratory Needed

16-02252

Metals and Alloys

ISO metallurgical laboratory needed for surface roughness testing on Aluminum. Quantity: 10 - 15 pcs, size 120 mm x 95 mm. Material: Aluminum. Surface finish Rz and Ra.

Laboratory Needed

16-02241

Food

Food Microbiology Laboratory needed for Pasteurization Validation Microbiology Testing of Apple Cider to show a 5 log reduction for a raw sample unpasteurized and a UV pasteurized sample. For Raw Apples - an analysis for heavy metals and mycotoxins.

Laboratory Needed

16-02200

Environmental and Ecology

Environmental Products Company needs Analytical Chemistry Laboratory for Analysis of Xanthates from surface water

Closed

16-02187

Mining, Metals and Ores

Mining company needs Geology Laboratory for mineral analysis of minerals present in stones to identify valuable gems mined in 50 feet deep

Laboratory Needed

16-02167

Metals and Alloys

Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp

Laboratory Needed

16-02150

Botanicals and Herbals

Pharmaceutical laboratory needed for USP Testing to USP 39 of 190 Proof Organic Corn Alcohol (Ethanol) for Organic Impurities (Methanol, Acetaldehyde and acetal, Benzene, Sum of all other impurities) plus testing Organic Vegetable Glycerin for Diethylene Glycol and possibly heavy metals (Specifically Lead, Cadmium, Mercury and Arsenic)

Closed

16-02147

Mining, Metals and Ores

Quarry needs Geology laboratory for marble and granite stone testing

Laboratory Needed

16-02084

Water, Sewer and Pipeline

Environmental Laboratory needed to perform several analyses on well water samples. There are 64 samples and each one will need to be analyzed for:1) Isotope analysis of: Sr, O, H, S and C2) Dissolved Gasses: O2 and H2S3) Heavy metals (in concentrations of microgram per liter-ppb): Fe, Zn, V, Al, B, Li, Ag, Mo, Rb, Se, As, Sn, U, Tl, Sr, Sb4) Silica (SiO2)Is your lab able to perform such tests? If so, I would appreciate a price quote.Please also a ...

Laboratory Needed

16-02067

Mining, Metals and Ores

Geology Laboratory needed for ASTM testing: Analys of rock salt (sodium chloride) based on requirements of ASTM D632. Chemical analyses will include sodium chloride purity (%NaCl) and moisture, but sodium ferrocyanide may also be requested. Physical analysis will entail a sieve analysis on the rock salt to determine the particle size distribution.

Closed

16-02061

Pharmaceuticals and Biopharmaceuticals

FDA GMP compliant Laboratory needed for Measurement of Free Tin in a tin containing compound by direct pulse polarimetry

Closed

16-02052

Mining, Metals and Ores

Mining operation extracting silver and gold needs cyanide bottle roll and size distribution test on some mine tailings to determine process and system cost. How many samples and what sample size will be required to complete the process? We are extracting silver and gold.

Laboratory Needed

16-02033

Chemicals

Metallurgical laboratory needed for ASTM Testing: mineral analysis of sodium chloride that includes purity, moisture content, gradation (per ASTM D 632 standard), moisture content, and sodium ferrocyanide content.

Closed

16-02030

Food

FDA GMP Food Laboratory needed for migration and extraction testing of BOPP Film Food packaging (Over all migration & Specific migration & NIAS-TNNP & heavy metals &FDA extraction as per (USA FDA 21CFR Section 177.1520) ) for our BOPP products based on the EU10/2011 and it's amendments 2015 & 2016 updates 2015/174 & ?1416-2016?.

Laboratory Needed

16-02026

Metals and Alloys

ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich CoresASTM C297 - Standard Test Method for Flatwise Tensile Strength of Sandwich ConstructionsIf you offer testing of aluminum honeycomb core, please provide a quote the three tests and for multiple honeycomb cell size.

Laboratory Needed

16-02025

Pipes and Piping

Laboratory needed for quality control testing of the piping pressure of a piping steel lining

Laboratory Needed

16-01947

Metals and Alloys

Materials Laboratory needed for Material characterization of metal with Polymer thinfilm - Mechanical properties characterization of flat thin steel (0.1 x 5 x 30mm) - Mechanical properties characterization of bent thin steel (0.1 x 5 x 30mm) down central axis - SEM imaging and cross sectioning of of metal+polymer thin film for thinfilm measurement

Closed

16-01930

Mining, Metals and Ores

Geology laboratory needed for sand analysis from mining operation

Laboratory Needed

16-01922

Solar Energy and Solar Power

URGENT LONG-TERM TESTING Laboratory needed for High temperature tensile strength testing of bonded aluminum sheets. Laboratory must have Environmental chamber with capability of heating up to 120C

Closed

16-01918

Metals and Alloys

Metallurgical laboratory needed for oxygen content testing and surface oxide testing of continuous cast copper rod. please provide sample requirement, time requirement and quotation for the same.

Laboratory Needed

16-01900

Oil and Oilseeds

Accredited laboratory needed for coconut oil testing for: VCO Saponification value (SV), Free Fatty Acid (FFA) value (Fatty Acid Methyl Esters (FAME) compositional analysis), Triacylglycerol (TAG) analysis (HPLC), Tocopherol analysis (HPLC), moisture content and range of brightness and yellowness Trace metals.

Closed

16-01878

Mining, Metals and Ores

University researcher needs laboratory for granite testing: Trace element and REE of 8 granites samples. plus Bore isotope or F isotope. K-Ar dating Fluid inclusion

Closed

16-01790

Oil and Petroleum

Laboratory needed for ASTM Testing of upgraded athabasca bitumen to astm d 2887, Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography4530, 5291, 2007 and 4052

Closed

16-01755

Oil and Petroleum

Europe materials laboratory needed for ASTM and DIN Testing of lubricant oils to Copper Corrosion ASTM D 130/12 Aluminium Corrosion DIN EN ISO 6270-2 Ash content: DIN EN ISO 6245 Flock Point DIN 51351

Closed

16-01751

Metals and Alloys

Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the Hiding Power of Powder Coatings, ASTM D 3451, ASTM D 3451, Standard Guide for Testing Coating Powders and Powder Coatings

Closed

16-01709

Electronics

India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial waste.

Closed

16-01708

Rocks and Stones

Geology laboratory needed for rocks testing: Sio2 53.2% Al 203 18.4% Fe 203 8.74% Tio2 0.41% CaO 1.26% Mgo 13.3% LOI 4.62%

Closed

16-01704

Mining, Metals and Ores

Geological laboratory needed for geological tests for gold

Closed

16-01672

Metals and Alloys

LONG-TERM TESTING Metallurgical laboratory needed for stainless steel tubing certification and testing for certain RA value, surface roughness

Closed

16-01660

Mining, Metals and Ores

Petrographical Analysis on 10 samples of Feldspar Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Clay Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Kaolin

Closed

16-01649

Mining, Metals and Ores

Environmental toxicology laboratory needed for TCLP Testing: Toxicity characteristic leaching procedure TCLP metals

Closed

16-01644

Medicinal Chemistry and Botanicals

Food analytical chemistry laboratory needed for Beta d glucan contents of our mushroom product line. 5-7 products. We can send the samples. Interested only in the beta d glucan contents of each product. Each product has already been tested for mircos, tpc and heavy metals.

Closed

16-01624

Coatings and Films

Metallurgical laboratory needed for Caustic soda testing on metals coatings.

Closed

16-01618

Metals and Alloys

Metallurgical laboratory needed for ICP-OES to do solubility measurements of metal oxides present in deep eutectic solvent liquid mixtures.

Closed

16-01612

Nutraceuticals and Dietary Supplements

IEC 17025:2005, FDA cGMP laboratory needed for analytical chemistry and microbiology testing of Coleus forskohlii / Plectranthus barbatus food supplements -Potency/extract level -Microbiological contaminants -Heavy metals -etcetera

Closed

16-01557

Mining, Metals and Ores

University Researcher needs Geochemistry laboratory for tantalite characteriaztion on (solvent extraction of niobium and tantalum from tantalite).80 Liquid samples to be characterize by ICP-OES, 30 solid samples to be characterize by XRF, SEM, XRD

Closed

16-01546

Mining, Metals and Ores

Mining Laboratory needed for ore analysis for for percentage composition of samples identified as Pb ex-site and Zn ores. Percentage of the major element, and I sent if I fixation of the minors. Elemental Shape/Size of major.

Closed

16-01523

Paints, Colorants and Dyes

Europe Materials Laboratory needed for Paint film performance tests on mild steel panels Sr No Test 1 Salt Spray Test (504 hours) 2 Humidity Resistance (504 hours) 3 Pencil hardness 4 Dry Adhesion 5 Elongation 6 Impact Resistance (direct) 7 Impact Resistance (indirect) 8 Colour Matching (Visual) 9 Colour Matching (Instrumental) 10 Metamerism Index 11 Gloss 12 Wet Adhesion 13 Chip resistance 14 Immersion Primer 15 Machinability 16 ...

Closed

16-01516

Metals and Alloys

Materials Laboratory needed for Elemental analysis: Carbon and hydrogen (C H analysis), C% and H%

Closed

16-01503

Metals and Alloys

Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks (or 1,2,3..months) later ,some of panels occur delamination problem? (Some of Project; We saw after the installation,after the fabrication ..) (Peeling test should be minimum 18 kg/25 mm)

Closed

16-01497

Construction and Building

Middle East Proficiency Laboratory needed for ACi, ASTM construction materials proficiency testing for soil, aggregate, concrete, bitumen, water and for

Closed

16-01457

Mining, Metals and Ores

Mining laboratory needed for lithium ore testing from mining site prospecting.

Closed

16-01435

Gems and Gemstones

LONG-TERM TESTING Gemstone company needs geology laboratory needed for metallurgical and mineral analysis for gemstones, silica, gold, platinum, rare earth, etc. Initial testing for 6 samples. Please specify if there is reduced price for sending samples on a regular basis or if there is a reduced price for quantity?

Closed

16-01416

Botanicals and Herbals

LONG-TERM TESTING Food laboratory needed for glycerin and 190 proof Grain Ethanol Testing for to verification of a suppliers Certificate of Analysis to following specifications: Organic Vegetable Glycerin Assay: greater than or equal to 99% glycerin by volume Specific Gravity: 1.248 @ 25 degrees Celcius Heavy Metals: Maximum 5 ppm (specifically Lead, Cadmium, Mercury and Arsenic) Water: Maximum 0.5% Diethylene Glycol: None Detected ...

Closed

16-01411

Nanotechnology

Environmental toxicology laboratory needed for EPA TSCA Testing of nanoparticles to Toxic Substances Control Act (TSCA) Chemical Substance Inventory, for Silica particle containing cadmium nanoparticles for OCED Number 29 , Guidance Document on Transformation/Dissolution of Metals and Metal Compounds in Aqueous Media

Closed

16-01406

Pharmaceuticals and Biopharmaceuticals

Pharmaceutical analytical chemistry laboratory needed for USP AA metals testing for raw materials

Closed

16-01370

Rocks and Stones

Geology Laboratory needed for Rock Evaluation including Pyrolysis and Vitrinite Reflectance tests

Closed

16-01336

Mining, Metals and Ores

GEOLOGY LABORATORY NEEDED FOR NON WOVEN GEOTEXTILE TESTING

Closed

16-01322

Metalworking, Welding and Casting

Metallurgical Laboratory needed for Gold purity testing

Closed

16-01299

Metals and Alloys

Materials Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials. Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Material should meet the requirements of AMS QQ-A-225/8A. Please provide quote and delivery time. Thank you.

Laboratory Needed

16-01292

Mining, Metals and Ores

Metallurgical Laboratory needed for ore testing for platinum, palladium, irridium, osmium, rhodium, rhothenium, gold & nickel

Closed

16-01264

Gems and Jewelry

Jewelry company needs metallurgical laboratory for ore testing. Identification and verificaiton testing for cobaltite.

Closed

16-01212

Metals and Alloys

Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Material should meet the requirements of AMS QQ-A-225/8A. Please provide quote and delivery time. Thank you.

Closed

16-01207

Life Sciences

Microbiology Laboratory needed for ASTM bacteria resistance testing on a lubricant according to ASTM E2275, Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance.

Closed

16-01180

Mining, Metals and Ores

Large organization needs laboratory for conducting testing on contaminated mining waste testing for acid generation potential.

Closed

16-01179

Rocks and Stones

South America Geology Laboratory needed for rock identification testing

Closed

16-01172

Mining, Metals and Ores

West Africa geology laboratory needed for testing stone and sand samples from a geological survey.

Closed

16-01152

Milk and Dairy

Food analytical chemistry laboratory needed for milk testing: Heavy metals residue tests of processed milk for lead, mercury, aluminum

Closed

16-01145

Metals and Alloys

Metallurgical laboratory chemical analysis (ICP analysis) to be carried out on crushed and grinded catalyst converter powder. Extensive test is needed to show grams of each metal substance in the mix.

Closed

16-01143

Polymers

Materials laboratory needed for rubber testing for Hexane extract, Thermal analysis (DSC, DMA, TGA) , EDX analysis (REM) of the material for heavy metals (Pb, Cr-VI, Hg, Cd), TDS-GCMS analysis of the material for softeners, Extractable matter (extration agent: n-hexane) % (Max) Tg (tan ? max) on sheet material (°C), Shore A Hardness on sheet material @ -40°C For 144 Hrs, Corrosion resistance @ 100°C for 24 Hrs.

Closed

16-01132

Furniture and Furnishings

Physical laboratory needed chair testing to test structural welding on a metal chair

Closed

16-01115

Pharmaceuticals and Biopharmaceuticals

Pharmaceutical analytical chemistry laboratory needed for quality control analytical testing on various raw materials including purity, adulterants, contaminants, buffing agents, heavy metals, etc.

Closed

16-01112

Mining, Metals and Ores

QUarry needs laboratory for grain size distribution testing of quarry samples

Closed

16-01106

Environmental and Ecology

ENvironmental laboratory needed for waste oil , soil and water testing for Radium 226/228 & other Gamma Emitters EPA 901.1 modified Waste and Oil Samples 40 samples, Fluorescent or High Intensity Discharge Lamp Preparation ANSI/NEMA: C78.LL 1256-2003/C78.LL 3-2003 Waste and Oil 10 Samples, Volatile Organic Compounds TO14A Air and Soil Gas 50 samples, Volatile Organic Compounds TO15 Air and Soil Gas 50 samples, Mercury 7471A or NIOSH 8009 ...

Closed

16-01089

Food and Beverages

Food Laboratory needed for testing about a dozen different processed/unprocessed foods for anything pcbs, heavy metals, toxins, pesticides, Various protein powders Vitamin C supplement Digestive Enzymes Nanogreens Chlorella tablet Butter Eggs Breast milk (if possible) Will also ask for a thorough description of results. Look forward to hearing from you.

Laboratory Needed

16-01067

Metals and Alloys

Analytical chemistry laboratory needed for petroleum wax testing

Closed

16-01062

Mining, Metals and Ores

Mining company needs laboratory for chemical testing, elements/Elemental Analysis Testing & machinery function

Closed

16-01049

Rocks and Stones

LONG-TERM Geochemistry laboratory needed for Adsorption Isotherms testing on Shale samples

Closed

16-01040

Nutraceuticals and Dietary Supplements

Food laboratory needed for dietary supplement testing: nutritional testing and quality testing to ensure the absence of pesticides, heavy metals or dangerous chemicals.

Closed

16-00994

Chemicals and Allied Products

Start-up company needs analytical chemistry laboratory for imported salt testing for Percent of sodium chloride, potassium,

Closed

16-00986

Mining, Metals and Ores

India metallurgical laboratory needed for metals testing for platinum, palladium, and gold

Closed

16-00955

Mining, Metals and Ores

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids. o increase our export possibilities we have chosen the 4 following adhesives and joint grout products for testing under the ANSI standards (Standard and optional performance characteristic). ? ...

Laboratory Needed

16-00945

Mining, Metals and Ores

CFB Plant needs geology laboratory for geophysical testing: Limestone reactivity test Please specify whether you have a test that can generate a limestone sulfation reactivity vs particle size graph

Closed

16-00936

Food and Beverages

Food Laboratory needed for testing about a dozen different processed/unprocessed foods for anything pcbs, heavy metals, toxins, pesticides, Various protein powders Vitamin C supplement Digestive Enzymes Nanogreens Chlorella tablet Butter Eggs Breast milk (if possible) Will also ask for a thorough description of results. Look forward to hearing from you.

Laboratory Needed

16-00932

Mining, Metals and Ores

Geology laboratory needed for Calcium Carbonate testing from a mine

Closed

16-00931

Chemicals and Allied Products,Cleaners and Detergents,Coatings and Films,Metals and Alloys,Pharmaceuticals and Biopharmaceuticals

Metal FInishing company needs toxicology laboratory for toxicity studies of liquid products for Eye irritation, Skin irritation, Acute oral toxicity, Acute dermal toxicity, and Inhalation toxicity. One product was tested many years ago, we would like to have updated results and a comparison to a newer product. Original results found lower limits for LD50 values, the only result which was eye irritation.

Closed

16-00921

Mining, Metals and Ores

GEOCHEMISTRY LABORATORY NEEDED FOR CHEMICAL COMPOSITION TESTING OF 2 STONES AND COAL SLAG.NEED TO CHECK chemical % of below compounds, Al2O3, Sio2, MgO, Fe2O3, K2O, CaO and soluble chloride.

Closed

16-00904

Mining, Metals and Ores

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids. o increase our export possibilities we have chosen the 4 following products for testing under the ANSI standards (Standard and optional performance characteristic). ? FLS 1000, tile and marble a ...

Closed

16-00893

Water, Sewer and Pipeline

EPA Environmental laboratory needed for bench-scale testing of a client?s wastewater treatment procedure. Client runs a metals finishing operation where they apply a chromate conversion coating to aluminum. Their wastewater is high in hexavalent chromium which they are able to remove by reducing it to Cr(III) and precipitating it as a hydroxide. Their current procedure seems to work well for this purpose. Recently they have been having some i ...

Closed

16-00887

Mining, Metals and Ores

LONG-TERM TESTING Southeast Asia Laboratory needed for grade testing of Graphite

Closed

16-00860

Metals and Alloys

Southern California company needs laboratory for identification testing of growth on aluminum metal surface. These is pitting, approximately 0.5 cm wide, in the surface of the metal piece and a rust colored growth can be seen within these pits. Please advise on necessary testing/pricing and timeline.

Closed

16-00855

Mining, Metals and Ores

GEOLOGY LABORATORY NEEDED FOR COLTAN ORE TESTING FOR CONTENT & CHEMICAL COMPOSITION

Closed

16-00935

Food and Beverages

Food Laboratory needed for testing about a dozen different processed/unprocessed foods for anything unnatural, pcbs, heavy metals, toxins, pesticides, and the list goes on for really anything outside of its natural form or list of label ingredients. A few things to be tested - Various protein powders Vitamin C supplement Digestive Enzymes Nanogreens Chlorella tablet Butter Eggs Breast milk (if possible) Will also ask for a thorough ...

Laboratory Needed

16-00834

Coatings and Films

Materials laboratory needed for physical testing of machine part that has Sulphuric Anodization on Aluminium that require following testing. a. Insulation of the oxide coating (Disruptive voltage test) b. Sealing quality ? to measure loss of the absorptivity of the anodic oxide coating c. Continuity of oxide coating d. Light resistance test

Closed

16-00828

Coatings and Films

Materials laboratory needed for ASTM Testing of chemical composition of galvalume coating. and the methodology.

Closed

16-00824

Environmental and Ecology

EPA environmental laboratory needed for environemtanl assessment and sampling of soil, sod and gravel. The samples need to be sent to an approved EPA Lab and meet the guidelines below taken straight from our EPA contract and the Performance Work Statement (PWS) for the sampling. 3.6 Sample Collection Procedures 3.6.1 Composite Samples for Backfill Each composite sample of backfill soil or gravel shall be collected and analyzed for the meta ...

Closed

16-00808

Rocks and Stones

Geology laboratory needed for grindability testing for limestone according to standard method

Closed

16-00802

Rocks and Stones

Organization needs geology laboratory for Certification testing of Geological Reference Materials

Closed

16-00698

Medical Devices and In-Vitro Diagnostics

Medical device company needs GLP laboratory for quality control of Ophthalmic viscosurgical devices, according to ISO 15798:2013, Ophthalmic implants -- Ophthalmic viscosurgical devices Required tests: concentration, molecular mass distribution, shear viscosity, elasticity, pH, chemical and biological contaminants (heavy metals, proteins, nucleic acids, residual IPA), osmolality, spectral transmittance, particulates, refractive index, bacteria ...

Closed

16-00669

Mining, Metals and Ores

Mining company engaged in the exploration of mineral deposits, mining of tantalum, industrial minerals and fashioning of gemstones needs geology laboratory for Chromium (chromite) testing of mineral deposits.

Closed

16-00629

Metalworking, Welding and Casting

Physical Laboratory needed for ANSI/ IEEE Arc Resistant testing of MV Metal Clad Panel to ANSI/IEEE C37.20.7 40kA 0,3/0,5s ? 13,8kV ? 60Hz Please specify the information for commercial conditions for the test

Closed

16-00627

Mining, Metals and Ores

India environmental laboratory needed for Biodegradation study of pharmaceutical in soil by Solid State Fermentation. Need respected laboratory to identify an unknown microbial culture isolated for research and development.

Closed

16-00602

Mining company needs UK or Ireland environmental compliance laboratory for Analysis of various types of cyanide in CIL tanks and in the environment for compliance purposes.

Closed

16-00589

Company needs contract laboratory for mineral analysis for ilmenite.

Closed

16-00568

Geological Laboratory needed for analysis of manganese ore

Closed

16-00502

URGENT India Metallurgical laboratory needed for mineral analysis of coltan (mineral),

Laboratory Needed

16-00501

Asia nutritional laboratory needed for Petfood Analysis for 10 samples of fishfeed for: proximate analysis, Ca, P, vitamin A, B6, E, D, K, biotin, folic acid, thiamin, riboflavin, niacin, panthothenic acid, inositol, choline chloride, Mn, Co, I, Cu, Zn, heavy metals

Laboratory Needed

16-00476

India environmental laboratory needed for sludge testing of sludge generated after treatment of Industrial wastewater (containing toxic metals etc) & also ground water samples for the parameters approved by CPCB.

Laboratory Needed

16-00470

Africa Mining Company needs Geochemistry Laboratory for mineral ore Zircon Sand Ore analysis . Please send us a quote to analyse this mineral ore on detailed composition of all elements present in the ore and the quantity required for this process.

Laboratory Needed

16-00434

Medical Device manufacturer needs FDA GMP Product Safety Laboratory for Toxicology Testing to support FDA 510K application a) A comprehensive scientific justification for the use of a additive containing heavy metals in a medical device b) Extractables and Leachables Testing on the final finished device, using an exhaustive extraction at 50oC for 72 hours in both a nonpolar and polar solvent c) A dermal risk assessment for each chemical ex ...

Laboratory Needed

16-00394

Geochemistry Laboratory needed for Limestone testing for the concentration of calcium of Limestone, also ore tantalum analysis and testing

Laboratory Needed

16-00370

Mining company needs laboratory for tests on gold samples -MLA (Mineral liberation analysis) -Bond Rod Mill/Ball Mil/Crusher -Bond Abrasion Index -Water analysis

Laboratory Needed

16-00355

Central USA Laboratory needed for thermal testing of charcoal to measure energy and chemical compositions of charcoal . Close to Illinois preferred.

Laboratory Needed

16-00346

India metallurgical laboratory needed for precious metal testinfg for identification and also the composition of the metal should be analyzed. Most importantly we need a comparison chart compared with Gold, Platinum, Silver or any other grades or nearing categories of metals. Kindly send us the quote for the same and also the amount of sample required for testing.

Laboratory Needed

16-00330

LONG TERM ONGOING QUALITY CONTROL TESTING: Bioanalytical laboratory needed for collagen protein analysis: 1) Undenatured Chicken Collagen Type 2 Protein purity 2) Hydrolyzed Chicken Collagen protein purity 3) Molecule size, Nutrition panel, Allergens, Chloride, Heavy Metals, Moisture, Ash

Laboratory Needed

16-00221

Contract Laboratory needed for Rhodium analysis: SEM and XDR

Laboratory Needed

16-00218

South America Food Company needs food laboratory for analysis of the percentage of concentration of soy isoflavone in an aromatic dried herbs blend we are creating for a new project. Specifically I need about the sample of aromatic dried herbs blend: -The soy isoflavone percentage of concentration in the blend -The content of heavy metals in the blend 1. quantity of the blend do you need for this task. 2. Can you please send me a quotation for ...

Closed

16-00182

Analytical Chemistry Laboratory needed for XRF analysis of chemical components limenite sand and Garnet sand ( Here with enclosed the list of chemical components) to sand sample by XRF analysis. Please kindly confirm the same and if it is possible kindly send the quotation for the analysis charges as soon as possible.

Laboratory Needed

16-00162

Contract laboratory needed for radiation test in hydrocarbon samples. Below is some information about the samples Propane samples ,which is a liquefied petroleum gas (LPG), will be pressurized hydrocarbons gas in liquid state. The samples are in a steel sample cylinder. Vapors samples, which is mainly consists of Methane, Ethane and a little of Propane plus, could be (or not) pressurized hydrocarbons in vapor or gas state. The samples are in ...

Laboratory Needed

16-00140

Metallurgical laboratory needed for Elemental Analysis C H N S Cu

Laboratory Needed

16-00130

Geology laboratory needed for bulk density testing done on irregular shaped rocks from blast holes.

Closed

16-00070

Contract Lab needed for ASTM ICP & AA analysis of metals samples. Mesh screening of powder samples. Surface area analysis of powder samples. Bulk density testing. Meet various ASTM standards but no specific certification is required

Laboratory Needed

16-00063

Metallurgical Laboratory needed for gold Analysis in soil. The gold is microscopic and it is embedded in an iron oxide matrix

Laboratory Needed

16-00031

Germany laboratory needed for lead ore testing: XRD or XRF or WET analysis of Lead Ore sample. Mineral element composition by weight and percentages.

Laboratory Needed

16-00006

Geology Laboratory needed for testing 600- 800 rock samples. The mineralisation is thought to be complex with Gold and PGM's being the primary mineral groups of interest.

Laboratory Needed

16-00002

US or UK geology laboratory needed for lime analysis for SiO2, R2O3, MgO, CaO, LOI, Sulfur.. Please send the quotations for Quicklime and Hydrated lime analysis. Material to be tested through XRD/Chemical analysis.

Laboratory Needed

15-02174

India geology laboratory needed for quicklime and hydrated lime analysis. Material to be tested through XRD/ Chemical analysis. Parameters to be tested are: SiO2, R2O3, CaO, MgO, Loss of Ingtion, Sulfur. Please send quote for analysis.

Closed

15-02167

India laboratory needed for Iridium analysis heavy metal

Closed

15-02143

Dubai metallurgical laboratory needed for ore testing or metallic ores to distinguish the type of metal within the ore.

Closed

15-02128

Laboratory needed for Heavy Metals testing in an oil matrix. Specifically MCT and Olive oil.It should detect As, Cd, Pb, and Hg. Each should be quantifiable to no less than 1 ppm. Pb should be quantifiable to ~0.05 ppm. The uncertainty value should be relatively small.

Closed

15-02122

Europe toxicology laboratory needed for study: nAchR test for nicotinic ganglionic acetylcholine receptor antibodies

Closed

15-02090

Looking to find a new lab testing company to do the 3rd party testing of branched chain amino acid product. HPLC Testing on Leucine, Isoleucine, and Valine - Microbial Testing - Heavy Metals Testing - Residual Solvents Testing testing company:

Closed

15-02089

Environmental laboratory needed for heavy metals testing of water and soil. Tests to include inorganic arsenic, methyl mercury, lead, and cadmium. The test should be able to detect at least to the level of 1 ppm.

Closed

15-02087

South Africa or Canada geology laboratory needed for clay soil testing 1. Total Organic Carbon (TOC) 2. Sorption Capacity 3. Cation exchange Capacity (CEC) and PH

Closed

15-02074

India Environmental Laboratory needed for particulate pollution / particulate matter testing PM2.5 and PM10. Analysis for trace metals by ASS

Closed

15-02062

Dubai geology laboratory needed for ore testing of: iron ore , Copper ore, Bauxite Limestone, Pozolada, Gymsum, Manganese ore

Closed

15-01978

India Contract Lab needed to test on all alcohols available in a malted beer and in distilled spirits presence of ony metals. presence of methanol and other alcohols and their parameters

Closed

15-01912

USA Pharmaceutical analytical chemistry laboratory needed for USP testing on raw materials - Sodium Fluoride, USP (Identification A, Heavy Metals, Fluosicilate, & Acidity/Alkalinity) & Cetylpyridinium Chloride, USP (residual solvents).

Closed

15-01891

URGENT TAT Microbiology Laboratory needed for Total Col and Ecoli testing of bacteriological 100ml samples? Also how much extra does a rush sample cost?

Closed

15-01878

India Physical laboratory needed for corrosion testing to optimise corrosion paramets. Corrosion gravimetric method tests for mild steel and other coupons in aggressive environments by varying parameters

Closed

15-01872

North America Geology Laboratory needed for Trace level analysis of As and Pb in fine grind nepheline syenite samples and low purity quartz materials

Closed

15-01855

Environmental Laboratory needed for mineral analysis: Testing for rare earth minerals.

Closed

15-01812

Gology Laboratory needed for core analysis: mineral test s of core samples for the presence of rare earths such as iridium

Closed

15-01810

South Africa Physical Chemistry Laboratory needed for Particle Size Distribution (PSD) testing of screened material for Performance Testing a vibrating screen. The material is Iron Ore sinter from the Arcelor Mittal VDB works. Maximum Material size:- -30mm Sinter, Minimum Material size:- Dust. A percentage per particle report would be required. We would like to know what it would cost per sample and how much material would each sample be requ ...

Closed

15-01798

United Arab Emirates Materials Laboratoryneeded for ASTM Testing: ASTM G180 test for Corrosion inhibiting admixtures for steel in concrete by polarization resistance in cementitious slurries.

Closed

15-01744

Geology testing lab needed to provide testing and certification in US of mineral that we are currently working on ? GLAUCONITE, or Greensand.

Closed

15-01722

North Carolina metallurgical laboratory needed for a gold / silver assay

Closed

15-01608

India physical laboratory needed for Chloride stress corrosion cracking test for Aluminium 7075 material, in Nacl solution

Closed

15-01570

FDA cGMP Consumer Products Laboratory needed for consumer products testing including sensory testing, comparison studies testing, consumer panel testing, Analytical Chemistry Testing, nutritional testing Vitamins Testing Anti-Oxidant testing Minerals Testing Heavy Metals Testing Amino Acids Profiles Testing Enzyme testing clinical testing Calories Testing Carbohydrates Testing Athsma Testing Anti-oxidants Testing Mercury content ...

Closed

15-01549

Materials laboratory needed for leachable heavy metals testing in a ceramix matrix to EPA TCLP 1311 submethod SW-846 EPA 6010/7470 . Must have ability and track record of performing the EPA Test Method.

Closed

15-01531

East Coast USA geology laboratory needed for rock ore testing for basic fire assay precious metals such as gold , silver and platinum

Closed

15-01518

Contract labs needed toperform compression testing according to a similar testing standard IFDC S-115 & IFDC S-107. Looking to receive a quote for sieve and compression analysis of 100 prill/granule samples, if there is an equivalent ASTM standard please forward me the information so I can review it, also please reference the standard method proposed in any quotes.Please separate costs for sample sieving and sample crushing, we may be able to se ...

Closed

15-01505

UK Geology Laboratory needed for Quartz stone testing of quartz from a mineral rich excavation of gold.

Closed

15-01501

Large Mining Company needs Nuclear Science Laboratory needed for radioactive sources testing from ore samples

Closed

15-01496

Looking for an analytical chemistry lab that can perform the following tests- Oxidation Test Method Limits Acid AOCS Cd 3d-63 NMT 3.0 KOH/g Peroxide AOCS Cd 8b-90 NMT 5.0 meq/kg Anisidine AOCS Cd 18-90 NMT 20.0 Totox (Total Oxidation) Calculation NMT 26.0 meq/kg Heavy Metals Test Method Limits Arsenic USEPA 1638 NMT 0.1 mg/kg (ppm) Cadmium USEPA 1638 NMT 0.1 mg/kg (ppm) Lead USEPA 1638 NMT 0.1 mg/kg (ppm) Mercury USEPA 1631 NMT 0 ...

Closed

15-01368

Materials Laboratory needed for ASTM Testing of a single oil sample for Wear Metals and Additive Elements to ASTM D-5185, Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

Closed

15-01366

Analytical Chemistry Laboratory needed for active ingredient testing: Product Analysis and Certified Limits. Chemical Analysis for heavy metals. Analytical test to determine the end product for N-P-K. Specific Gravity for the finished product within 3 decimal points. Physical and Chemical Properties. ( color, odor,pH, viscosity, corrosive characeristics, Bulk Density.

Closed

15-01333

Minnesota Geology laboratoryfor metals testing for copper

Closed

15-01309

Analytical chemistry laboratory needed for rock salt testing to be tested to determine the type and qty of insolubles/impurities in the product such as clay, mud, heavy metals etc.

Closed

15-01281

Asia geology laboratory testing on nickel ore: PSD (sieve and sedimentation), Particle Density, Atterberg Limits (plastic limit and liquid limit), Remoulded Quick undrained triaxial (Consolidated Undrained at 100, 200 and 300 kPa)

Closed

15-01276

Corporation bringing new algae omega oil product to market needed for complete certificate of analysis testing appropriate for an ingestible nutraceutical product. We would be interested in NSF certification, vegan or American Vegetarian Association, non GMO.Testing to include Fatty Acid Profile - EPA & DHAOxidationHeavy MetalsMicrobial Analysis

Closed

15-01271

Geology Laboratory needed for mineral / metals testing of an ore from a mine in Mexico ore to make a test of gold, silver, iron and / or platinum

Closed

15-01141

Environmental laboratory needed for ASTM Testing to ASTM D4874-95 soil column study on a 3 foot core obtained from the field. Ideally, we would like to maintain the integrity of the in situ pore structure and keep the pore space undisturbed. A sludge mixture would need to be applied to the samples and the effluent would be analyzed for metals.

Closed

15-01140

California environmental laboratory needed for soil testing for metals including remove pore fluid from soil samples collected in the vadose zone. We would then like to analyze the extracted pore fluid for metals. However, we would like to collect the pore fluid and analyze the samples under anaerobic conditions to reduce oxidation.

Closed

15-01135

Agriculture Laboratory needed for New Feeds Testing: Feed Fatty Adic Profile including: Total Fatty Acids % Free Fatty Acids % Monoglycerides % Diglycerides % Triglycerides % Total Impurities(I) % Metals (Na, K, Ca,Mg,Zn,P ) ppm Chloride ppm Unsaponifiables (U) % Iodine Value (IV) or Bromine # Salt Content PTB TAN Specific Gravity Melting Point °C Viscosity (120°F) Cst

Closed

15-01109

Materials Laboratory needed to test materials to AMS-STD-2154 Standard method for the ultrasonic inspection of wrought metals and wrought metal products. Material to be tested: STS 416H ,STS 416T sample size to be tested : Dai, 100mm Solid Rod, thickness: 50mm If this is within the scope of your capabilities, please give me your ROM quote or ballpark costs including sample size and turnaround time.

Closed

15-01002

India geology laboratory needed for resin bond diamond squaring wheel testing

Closed

15-00989

FDA Packaging laboratory needed for USP / EP testing of glass molded vials and ampoules. 1. Arsenic release test as per USP/EP2. Soda Extract test as per EP (Surface Hydrolytic resistance - determination by Flame spectrometry)3. Glass Grain Test as per USP/EP4. Surface Glass Test as per USP/EP5. Heavy metals in glass vials

Closed

15-00919

Southeast USA contract laboratories needed for nutraceutical ingredient testing: Assay and heavy metals testing of raw nutraceutical ingredients. Ex. Creatine Monohydrate, Arginine Alpha Ketoglutarate 2:1, BCAA, D-Aspartic Acid, etc.

Closed

15-00918

University Engineering Research Scientist needs India physical laboratory for steel testing to EN Standards: fracture toughness (K1C) for En19,En24 and En25 steels.

Closed

15-00901

Geology Laboratory needed for ASTM Testing of Bitumen to ASTM D3173, D3175, and D5142. Essentially would like a approximate and ultimate analysis of bitumen

Closed

15-00888

Pharmaceutical analytical chemsitry laboratory needed for softgel testing for heavy metals and optical rotation

Closed

15-00847

ENvironmental Toxicology needed for bioremediation pilot test with specific microbial strain types provide testing efficiency of specific microbial strains and their effects on contaminants, concentration designs and microbial population correlation studies within 24 hour time frame. In-house laboratory scale pilot test studies.

Closed

15-00789

Russia geological laboratory needed for geochemistry testing: chemical analyis of Graphite for the the total carbon in graphite (Cg)

Closed

15-00780

Egypt Geology laboratory needed for geotechnical testing: Pull-out tests for Pull-out and lateral-pressure test. Pull-out Tests (#1) must be carried out with ramming-machine (Gayk HRE 1000 or similar) or adapted-backhoe drive-head suited for direct-driving (ramming). The profile to be rammed must be of type C 180x70x40 (minimum 40mm thickness required). The ramming depth must be 1.2-1.9m DPSH tests (ISO 22476-2:2005: Geotechnical investigation ...

Closed

15-00778

ISO, ILAC, NRTL, KOLAS USA, Canada, China, or UK Materials Laboratory needed for hydrocarbon contamination testing for Determination of Hydrocabon contamination on copper fitting inner surface according with ISO15001. For applications in the pressure range of 50 kPa to 3 000 kPa, not have a level of hydrocarbon contamination greater than 550 mg/m2.

Closed

15-00716

URGENT: Environmental laboratory needed for water testing that has the capability to receive samples delivered from overseas, test samples urgently according to the list below and report results. Samples from 2 sites in Asia would be sent twice per month for testing, perhaps for the next 6 months. The laboratory would need to arrange all logistics on arrival in their country to allow prompt analysis of the samples. Please supply a quotation ...

Closed

15-00693

Metallurgical Laboratory needed for metal ore testing of two samples. One is still in its natural soil form, while the other is a concentrate where only the soil is removed and the metal ore mixture is kept. I need to know the composition of each sample and the percentages of each element.

Closed

15-00682

India metallurgical laboratory needed for stainless steel testing for SS304 certificate. Please let me know

Closed

15-00656

Environmental laboratory needed for sludge testing to detect siloxanes, analysis for silicon (Si) and silica. If the actual siloxane compounds can be detected by a GC/MS method (we can supply the list of compounds). A full metals scan to include Fe along with magnesium, ammonium, and phosphate for struvite. Sodium carbonate should be done for the soda ash. Also analyze for carbon and nitrogen as sludge components.

Closed

15-00530

Midwest USA analytical chemistry laboratory needed to Evaluate using FTIR to use as a quality control tool for a inorganic product.

Closed

15-00513

Asia metallurgical laboratory needed for Chemical Composition testing: Titanium purity, K, Al, V and F for Ti75. ? Lithium analysis for the following materials: a) Carbon block b) Alumina c) Aluminium Fluoride d) Cryolite

Closed

15-00500

Geotechnical metallurgical laboratory needed for iron ore testingof Raw-Material Iron Ore -325 Mesh 75% + test & results of Concentrate Grade 63.5 FC?? How much quantity you will be required of raw-material iron ore -325 mesh 75% + for testing of final output Concentrate Grade 63.5 FC. Material Grade: -325 mesh 75% + iron ore test Vs Output Grade: Concentrate Grade 63.5 FC results?? 1- In Tailing what is FE % in iron ore sample -325 mesh 75%+??? ...

Closed

15-00459

UK geology laboratory needed for clay testing from tests on clay samples from a large clay deposit to determine usage suitability end uses as clay bricks, tiles, ceramics etc.

Closed

15-00428

Large company needs Canada Geology Laboratory for micronizing / crushing cobbles ( 3 buckets of 20 kg) down to 2-3 in size materials.

Closed

15-00420

India Metallurgical Laboratory needed for Metallurgical Testing of Litharge: Gold and Silver content from litharge CAS # 1317-37-8. Gold in PPB and Silver in PPM level

Closed

15-00345

Geology laboratory needed for certified metallurgical testing of Coltan Ore, Tantalite

Closed

15-00288

Geology Laboratory needed for rock testing: stone value test (BS812) on some rock samples obtained recently. Can you please provide the following below: -cost of these test per sample or the packages available -the requirements for preparation for analysis (sample sizes etc) -method of payment as well as account details (wire transfer etc) -length of time to complete these test.

Closed

15-00277

Toxicology Research Laboratory needed for environmental toxicology study for Metals: Cu, Zn, As, Pb y Cd on the muscular tissue of freshwater fish (trout) N° Samples: 25

Closed

15-00276

Geology Laboratory needed for copper testing by atomic analysis

Closed

15-00246

Certification Laboratory needed for Mining Belt certification testing. Certified as per CSA M422-14 The size of the samples are detailed in the standard and if you are able to certify to that standard, I was hoping you would tell me exactly how much material you will need to do the test?

Closed

15-00223

Analytical Chemistry Laboratory needed for carbon black testing: Infra Red Spectra on Carbon Black (powder - after pelleting with Kbr)

Closed

15-00221

Materials Laboratory needed for testing done on steel group material. 1- Tensile test 2- Preparation of sample for Tensile test 3- Bend test 4- Preparation of sample for bend test 5- Hardness test 6- Metallography 7- Preparation of sample for Metallography 8- SEM study (per hour) 9- HIC test 10- SSCC test 11- Salt spray test (per hour)

Closed

15-00210

FDA GMP / ISO biotechnology laboratory needed for Aminoacid profile testing , PDCAAS, Free Glutamic acids,heavy metals

Closed

15-00147

USA Materials Laboratory needed for ASTM Testing coal ash for moisture and unburned carbon ASTM Method Numbers ASTM D3302, ASTM D3173, and ASTM D6316

Closed

15-00135

Asia analytical chemistry laboratory needed for soap testing: Soap base analysis: Composition, % ? Palm Oil + Palm Stearin : 80 Palm Kermel Oil : 20 Free Alkali, as NaOH, % ? 0.01% Max Moisture, % ? 14% Max Chlorides, as NaCl % ? 0.8 Max Total fatty matter, % ? 78.0 Min Chelating Agent, % ? TETRASODIUM EDTA : 0.0156 Odor : characteristic, similar standard Optical Brightness : Absent ...

Closed

15-00129

Texas metallurgical laboratory needed for rock testing for gold and silver.

Closed

15-00107

US FDA analytical chemistry laboratory needed for FDA cGMP Heavy Metals Testing General Chapter <2232> Heavy Metals 1. Butylated Hydroxytoluene NF 2. Citric Acid Anhydrous USP 3. Fluorouracil USP 4. Glycerin USP 5. Methyl Gluceth-10 6. Refined Peanut Oil NF 7. Sodium Hydroxide NF 8. Sodium Metabisulfite NF 9. Stearic Acid NF 10. Tretinoin USP

Closed

15-00089

Metallurgical Laboratory needed for elemental analysis of rock for mineralized metallic and non-ferrous

Closed

15-00028

Mobile Drug Testing Company performing steroid, workplace, background check testing with Business, School and Individual clients needs clinical laboratory for testing their client samples: 1. ancestry 2. heavy metals/poisoning

Closed

15-00016

Pharmaceutical product safety and toxicology laboratory needed for product safety studies of electronic cigarette pharmaceutical, 1 x Electronic cigarette test for contaminants: 2 tests required: 1) Sample analysis of the nicotine solution (nicotine, propylene glycol, glycerine) including food flavouring, collectively known as the eliquid. and 2) Sample analysis of emissions. Collect sample from electronic cigarette using a smoking ma ...

Closed

15-00006

Mining company needs Africa chemical laboratory to perform our mineral sample tests and confirm the percentage of the following radicals in our tantalite samples 1. Ta2O5, 2. Nb2O5 3. TiO2 4. Fe2O3 5. MnO 6. P2O5 7. WO3 8. UO3 9. Th 10. ZnO 11. AL2O3 12. ZrO2 13. SiO2 14. CaO 15. SO3 16. K2O. Please indicate total cost of chemical analysis in US Dollars

Closed

14-01633

India geology laboratory for mineral testing in Rock for identification of mineral percentages in the rock. Please specify the cost me for a complete analysis?

Closed

14-01623

Mining company needs India geology laboratory for granite stone testing

Closed

14-01621

London Metallurgical laboratory needed for mineral analysis of soil samples

Closed

14-01620

University Researcher needs Africa Geoogy Laboratory for coal testing: Maceral analysis - Coal biomarker(Full scan)- coal Vitrinite reflectance- Coal 5 samples

Closed

14-01616

MINING COMPANY NEEDS INDIA METALLURGICAL LABORATORY FOR TIN TESTING: TIN METAL AND TIN ORE. ALSO WE WANT TO ANALYSE TA2O5 AND NB2O5, WHICH FINDS IN OUR BY PRODUCTS AFTER SMELTING TIN ORE.

Closed

14-01565

URGENT: Materials Lab needed for ASTM testing. 1.-pH (ASTM D1287). 2.-Density (ASTM D5931). 3.-Water content (ASTM D1123). 4.-Alkaline reserve (ASTM D1121). 5.-Ash determination (ASTM D1119). 6.-Metals by ICP-OES (ASTM D6130). Preferent metals: Aluminium, iron, copper & zinc. 7.-Anions by Ion Chromatography (ASTM D5827). Preferent anions: Silicates, Chloride & Sulfates 8.-Boiling point (ASTM D1120). 9.-Glassware corrosion (ASTM D1384)

Closed

14-01553

Underground ining Company needs Phillipines Metallurgical Laboratory needed for metallurgical assaying services in the Philippines.

Closed

14-01545

Middle East Geological Laboratory needed for Geochemical testing for heavy minerals, isotopes, petrographic analysis.

Closed

14-01523

India Oil Laboratory needed for ASTM naphtha testing: Sl No Parameters Unit 1 Specific gravity @ 150C 2 Paraffins %Wt 3 Olefins %Wt 4 Naphthenes %Wt 5 Aromatics %Wt ASTM D86 Distillation Initial Boiling Point 0C 6 ASTM D86 Distillation Final Boiling Point 0C 7 8 Molecular Weight Kg/Kgmol 9 C/H Ratio 10 LHV of Gas-Phase Naphtha KCal/Kg 11 H2O ppmw 12 Total Sulphur ppmw 13 Total Chlorides ppmw ...

Closed

14-01501

Large Mining Company needs site assessment service for landfarming and bioremediation project to treat hydrocarbon contaminated soil/sludge from Oil water separator and hydrocarbon contaminated spill.

Closed

14-01489

Nanotechnology laboratory needed for microscopy for nano-carbons in raw ore by Scanning Electron Microscope SEM

Closed

14-01474

Africa metallurgical laboratory needed for soil testing: lab tests and analyses.

Closed

14-01470

Middle East metallurgical laboratory needed for steel leachate testing of steel slag that needs to be deposited. Before this, the slag shall be analysed according to Australian Standard "AS 4439.3 - 1997: Wastes, Sediments and Contaminated Soils - Preparation of Leachates, Bottle Leachating Procedure". The Leachate shall be analysed for among others heavy metals (e.g. Cr total)

Closed

14-01468

Africa ISO metallurgical laboratory needed for mineral analysis

Closed

14-01400

California Mining Laboratory needed for gold mine lab test services at gold site. Your actual test sample can be dry process or save green process. It doesn't need to be chemical involve except assay test and report. Sample test can be regular dirt, sand, silt. It doesn't have big rock. Please contact us for more information.

Closed

14-01399

South Africa mining laboratory needed for chemical analysis of Tantalite ore- Legally produced

Closed

14-01394

Saudi Arabia metallurgy laboratory needed for Gold coin testing for precious metals

Closed

14-01340

Europe Laboratory needed for Tekken test or ISO 17642-2 Destructive tests on welds in metallic materials -- Cold cracking tests for 5-10 Samples

Closed

14-01281

Oil Laboratory for crude oil testing on following: Asphaltenes ASTM D6560; Flash point ASTM D56: Total sulfur, mercaptanes, H2S - UOP 163; Total nitrogen ASTM D4629; Bromine number ASTM D1159; Heat of cumbustion ASTM D240; Ashes - ASTM D482; Metals - ASTM D5708, D5863, IP-501; Chlorides - ASTM D4929, UOP 779, UOP 588; Organic chlorine; Wax content; Atmospheric and vacuum distillation D2892, D5236, D86, D1160; Acid number; Vapor ...

Closed

14-01265

USA Materials Laboratory needed for catalyst testing. The material is either a Catalyst, containing some nickel (we would want to know the exact content) or it may just be a ceramic catalyst support, we'd like to find out it's properties

Closed

14-01220

2 FDA approved test labs needed that can test Chinese herbal supplements for metals and for fungus/parasites/microbial pathogens? Prefer labs in USA Mid-Atlantic, East Coast area, if possible.

Closed

14-01158

USA geology laboratory needed for elemental analysis on hard rock concentrates to get an accurate percentage or ppm number of the precious metals and rare earth elements that is in my material. The precious metals I would be interested in having in the test would be: Platinum, Rhodium, Gold, Iridium,Osmium, Palladium, Rhenium, and Ruthenium. And the rare earth elements I would be interested in when doing elemental analysis on my material would b ...

Closed

14-01125

Two FDA approved test labs needed that can test Chinese herbal supplements for metals and for fungus/parasites/microbial pathogens? Prefer labs in USA Mid-Atlantic, East Coast area, if possible.

Closed

14-01090

USA ISO and FDA GMP analytical chemistry laboratory needed for cosmetics testing: Heavy metals testing of lipstick and other cosmetic products

Closed

14-01082

Midwest USA laboratory needed for ore testing: analysis on alumina ore: Moisture Content Particle Sizing Loss on Ignition Fluoride Alumina Content Soda Content Carbon Content

Closed

14-01051

Research geologist needs certified Canadian lab for mineral analysis of whole rock. Assays for I Fe, Cr and Gold. Please provide prices per test sample.

Closed

14-01047

Metallurgical Laboratory needed for ASTM metals testing by wet chemical analysis or mass spectrometry. 3 samples of calcium metal (Ca) of purity 98.5% minimum to be analyzed for Zinc (Zn) content to 3 decimals accuracy (x.xxx)

Closed

14-01040

Texas, Colorado, or Lousiana Laboratory needed for ASTM Testing: Proximate analysis of coal

Closed

14-01009

Reliable Asia laboratory meeded to do Vitamins, Amino acids, Antioxidants, Minerals/Heavy metals, Fatty acids, Nutritional labeling tests e.t..c for our products

Closed

14-00987

Ventura County California Laboratory needed for metallurgy testing on ore

Closed

14-00981

Geochemistry Laboratory needed for Limestone testing. Purity testing for Calcium

Closed

14-00960

COMPARATIVE TESTS BETWEEN Dubai Mining Laboratory needed for leaching studies for chemical testing: SODIUM CYANIDE AND VIRIDIS 100 IN THE LEACHING OF GOLD

Closed

14-00902

US Food Laboratory needed for China imported fruit testing for heavy metals.

Closed

14-00872

Mining consultants developing a project for mining tailings (slurry) pipeline needs laboratory for abrasion resistance testing of two pipe materials - HDPE RC, and Polyurethane. We can provide samples from the materials and slurry.

Closed

14-00806

Contract Research Organization required for Oncology sample testing of below test 1.Specific optical rotation 2.Heavy Metals. 3.Residue on ignition.

Closed

14-00785

North America Laboratory needed for Chemical ad Metal Testing to APHA <4110> and EPA 200.8 and 245.7: Chemical: Iodide, Bromide, Chloride, Nitrate-N Metals: Total Arsenic, Cadmium, Lead, Total Mercury

Closed

14-00775

India geology laboratory needed for metallurgical analysis: Composition testing of Iron ore

Closed

14-00761

ISO South Africa Laboratory needed for ASTM Thermo gravimetric analysis (TGA) of limestone, ten samples consisting of 10 pieces (75mm length by approx. 30mm width) of limestone

Closed

14-00740

Manufacturer needs Materials Laboratory for metalurgical failure analysis / corrosion testing: Full report on the cause of the premature corrison on Alum sheets

Closed

14-00729

Ph.D University Researcher needs India marine toxicology laboratory for fish toxicology study on accumulation of heavy metals in fish organs).

Closed

14-00726

Ontario Canada A2LA or ILAC Materials Laboratory needed for ASTM Testing: Material testing of automotive fasteners. Hardness testing rockwell c and others. Thread verification, plating thickness, chemical composition of metals and coatings. Salt spray testing. Tensile and shear. Optical comparator for dimensional. Gauge calibration and Gauge R&R.

Closed

14-00702

Asia mechanical laboratory needed for ASTM Steel testing to ASTM E604: Mechanical testing on steel products. Dynamic tear test

Closed

14-00632

India Analytical Chemistry Laboratory needed for Hydrogen and Oxygen PPM Testing

Closed

14-00565

Analytical chemistry laboratory needed for zeolite testing of a new zeolite: 600F in a liner heated cylinder releases hydrogen gas down the column and does not effect the hydrocarbon that immediatly alkylates. There is problem with cracking unit that allows hydrides to effect the hydrocarbon and produces small unsaturated molecules incresaing greatly the prssure. Westerrn will be very interested. I need alab that can follow and procedure to mak ...

Closed

14-00509

Canada Gemstone Mining Representative needs Cannada Metallurgical Laboratory needed for mineral analysis. Gemstone testing and marking the percentage of purity of our product: ? Dust Gold ? Lead, ? Copper ? Manganese stone,

Closed

14-00486

United States metallurgical laboratory needed for Zwick Toniperm air permilabilty test- specific surface area for Iron Ore samples

Closed

14-00483

Analytical chemistry laboratory needed for chemical and physical testing of Chemical & Physical parameters of minerals like Calcite/Dolomite;Feldspar etc

Closed

14-00470

USA geology laboratory needed for mineral analysis: lab analysis of mime sample of ore (in powder form) to determine % of tin in sample"

Closed

14-00468

USA geology laboratory needed for mineral analysis: MSDS testing for head ore

Closed

14-00375

Pharmaceutical manufacturer running Clinical trials for a herbal based product in the USA needs GLP laboratory for GLP testing to determine pesticide residuals, heavy metals, and federalize residuals for three batches of the herbal-extract based product before shipping."

Closed

14-00351

Nutraceutical Manufacturer needs North America analytical chemistry laboratory for ICPV2 heavy metals testing for heavy metals to in liquid ionic silver sample - Hg, As, Cd, Cr, Pb to ICPV2

Closed

14-00350

Mining Company needs metallurgical laboratory for mineral annalysis for calcium carbonate and other minerals. We need help to assess our quarry lime stone deposits; since we have had different lab tests from local labs.

Closed

14-00337

Materials Laboratory needed for roughness testing of lead frame.

Closed

14-00314

Mining Company needs geotechnical laboratory for early stages of testing manganese mining samples and core samples. The samples that we have are samples obtained at the surface as well as core samples obtained between 2-3 meters down. We are looking to establish a long range relationship with a laboratory that can test crude ore samples, in process samples and final (pure metal) samples for manganese content and impurity levels. In the event we ...

Closed

14-00307

Industrial Hygiene Microbiology Laboratory needed for Industrial Hygiene Testing: Microbiological Testing and Metals Testing required are: Fungal Spores, Pathogens, Metals, and Pesticides. The media is dollar bills.

Closed

14-00232

Geochemical laboratory needed for assay analysis of bituminous shale.

Closed

14-00212

Australia company needs Asia Geotechnical laboratory for mineral analysis of Cu-Au and other minerals for mining purposes.

Closed

14-00098

Analytical Chemistry Laboratory needed for pharmaceutical chemicals BP / USP analysis of talc powder chemical talc powder chemical analysis,whiteness,granulometry D-50 Heavy metals,Asbestose,water soluble matter,acid sol matter,sieve residue on 325.600 mesh

Closed

13-01657

Metallurgical laboratory needed for mineral analysis and metallurgical testing: gold, diamond or other mineralsfor rocks and dirt

Closed

13-01655

sand that contains mineral ores, I ready to send you and pay the cost.

Closed

13-01610

MONTHLY LAB TESTING: Southwest USA laboratory needed for USAP and AOAC dietary supplement testing, primarily microbiology testinng and heavy metals testing. The dietary supplements in capsules (herbs, vitamins, minerals, other supplements). The supplements are all in dry powdered form. Certain products would be tested for certain things. The number of tests for a given product would range from 1-10. (approximately). 1. arsenic 2. cadmium 3. chrom ...

Closed

13-01578

Food Laboratory needed for ORGANIC FOOD testing 1. Pesticides 2. Aflatoxin Total 3. Heavy Metals 4. GMO

Closed

13-01566

Pharmaceutical Analytical Chemistry Laboratory needed for Quality Control / Quality Assurance QA testing of Medicinal marihuana of dried product tested for bacteria, moulds, yeast, alfatoxins, heavy metals, CBD levels and THC levels.

Closed

13-01560

Southwest Canada microbiology laboratory needed for microbiology testing on dried medicinal marijuana: Total arerobic microbial countTotal combined yeast and moulds countBile - tolerant gram negative bacteriaEscherichia coliSalmonellaAlfatoxinsHeavy metalsTHCCBDpest control residueHealth Canada suggests the European Pharmacopeia

Closed

13-01558

Asia metallurgical laboratory needed for metallurgical testing: cooper testing for copper ore inspection Copper Ore(Cu:10%+-) If you can, could you please inform me the following questions? -How long can I take the report? (better can get in 1 day) -How much it cost? -Need to make an appointment before we go(about 2nd on december)? Looking forward to your early reply.

Closed

13-01557

Asia laboratory needed seawater immersion testing corrosion tests for various materials (resins and metals) and for composite modules of offshore locations

Closed

13-01513

Canada pharmaceutical laboratory needed for medical marijuana testing: specific test requirements, but these are a fewheavy metals, Aflatoxins, microbiological purity, pesticides, moisture content, Potency THC CBD, chemical identity...cannabinoids profile Need testing of medical marijuana, normally one or two samples, every week.

Closed

13-01482

Quarterly testing. Northeast analytical chemistry laboratory needed for Ammonium Hydroxide testing (Aqua Ammonia 21 BE) to determine if it is reagent grade material. This would be quarterly testing and including the following: 1. Residue after Ignition (0.002% max) 2. Carbon Dioxide (0.002% max) 3. Chloride (0.5 ppm max) 4. Phosphate (2.0 ppm max) 5. Total Sulfur (as SO4) (2.0 ppm max) 6. Heavy Metals (as Pb) (0.5 ppm max) 7. Iron (n ...

Closed

13-01455

FDA GMP Europe pharmaceutical laboratory needed for analytical chemistry testing: moisture content by TGA ICPMS for Tin and heavy metals. we have methods for testing

Closed

13-01448

INDIA NABL LABORATORY NEEDED FOR MATERIALS TESTING: METALLURGICAL TESTING, HARDNESS TESTING DONE THROUGH NABL IS METALLURGICAL VALID PFOR THE SAME.

Closed

13-01413

Asia Mining Laboratory needed for ASTM testing of Fe

Closed

13-01410

LONG TERM CONTRACT: Hong Kong gold mining company needs Asia metallurgical laboratory for metallurgical gold testing: composition test gold nuggets of over 90% concentration. The services contract shall be covering 8 testing services a month in 3 consecutive years.

Closed

13-01359

US Food Laboratory needed for honey testing for pesticides, herbicides, heavy metals, toxins; chemistry in Sample of honey blend

Closed

13-01353

Pharmaceutical Product Safety Laboratory needed for Microbiology testing and product safety testing of excipient to obtain GRAS status. Acne: propionibacterium zones of inhibition, staph species involved in acne also; MIC value (minimum inhibitory concentration) 2) USP 51 antimicrobial test 3) Antiseptic challenge: 5 microbes: E coli, Staph aureus, pseudomonas aeruginosa, candida albicans, aspergillus niger. 4) Safety for ...

Closed

13-01348

Geological Laboratory needed for mineral analysis of rocks for mining claims.

Closed

13-01323

India Laboratory needed for diamond testing of Mining Ground Sample.

Closed

13-01306

Oklahoma materials laboratory needed for ASTM Testing: Gympsum testing of raw gypsum samples to ASTM or other required to determine quality for use of gypsum for wallboard, plaster and/or food additives, 10 samples Will provide crushed gypsum from core.

Closed

13-01275

Mining company needs Metallurgical laboratory for metallurgical analysis for Si(Silicon): 7-12% Hf(Hafnium): 1-2% Zr(Zirconium): 20-30% Fe(Iron): 20-40% Al(Aluminum): 0.7-2% Ti(Titanium): 24-30% Cr(Chromium): 1-2%

Closed

13-01250

Central America environmental laboratory needed for environmental chemistry testing and Water quality testing (nutrients, heavy metals, etc); Sediment sampling (nutrients, heavy metals, etc); Biologic components (coli, etc); Marine and Freshwater samples; Taxonomy

Closed

13-01234

Aluminum company needs analytical chemistry laboratory for contaminant testing in kerosene lubricant additive alcohol and esther...contaminant concentration, 300 viscosity and 500 viscosity "Hi, this is Donna Compton with aluminum and minute walk Wisconsin We're trying to locate a lab they can do it anyway this (delay?) should work for us to tell us the concentration of

Closed

13-01219

India toxicology laboratory needed for Toxicity Testing of heavy metals on the liver of fish

Closed

13-01128

Clinical Laboratory needed for clinical testing. hair tests (heavy metals and toxins. Rates, expedite, schedule. email: phonenumber: address:

Closed

13-01104

Geotechnical laboratory needed for iron testing: % of iron on metal samples ,,,

Closed

13-01083

ISO food microbiology laboratory needed for food testing: microbiology testing, heavy metals testing, pesticides testing

Closed

13-01076

Metallurgical laboratory needed for ISO Testing: GOLD Testing to ISO 11426 / 2010 determination of gold in bullion by cupellation

Closed

13-01063

Mining Laboratories needed for mineral testing

Closed

13-01024

Consumer Products Toxicology Laboratory needed for toxicology testing of New birthday candle line needing test for toxins/metals.

Closed

13-01001

US analytical chemistry laboratory needed for ICP Analysis on the ppm or mg quantity of zinc found in a zinc tablet.

Closed

13-00994

Houston metallurgical laboratory needed for metallurgical testing: Chemical composition test for silica sand sample To test the % of SiO2 / Fe2O3/ Al2O3

Closed

13-00976

3rd Party Analytical Chemistry Laboratory needed for dietary supplement testing: certificate of testing to validate COA from contract manufacturer(s); 3 consecutive lots. Heavy Metals, Pesticide Residues, Analytical

Closed

13-00965

New Jersey Materials Laboratory needed for metals testing: a) SEM/EDX b) TEM c) Salt Spray Chamber (ASTM B 117) d) Taber Abrasion (ASTM D 4060) e) ASTM B 571 - Bend test f) Electrical Break Down testing. g) Coating thickness h) Hardness Tester i) Conductivity measurements j) Coefficient of friction testing

Closed

13-00963

Africa Metallurgical Laboratory needed for metallurgical testing: Au fire assay with AA finish and Sb analysis, about 200 samples. Standards and blanks at 10% of total

Closed

13-00949

India Materials laboratory needed for metaurgica analysis No of samples -- one only Type -- Anode slime (Residue of Electrolytic copper) Handling -- Safety glows, mask

Closed

13-00932

Toxicology and Microbiology Laboratory needed for toxicology testing for hair care products: for testing on toxicological risk assessment, ingredient review, labeling review, anti-microbial preservatives effectiveness, microbial contamination test, heavy metals/ mercury content, phthalates in cosmetics, 1,4 Dioxane test (21 CFR), N-nitrosodiethanolamine (NDELA), 26 allergenic fragrances, nitro musk compound, pH value, formaldehyde, benzene, tolue ...

Closed

13-00921

NY electrical laboratory needed for electronics testing of recycled electronic products. 100% of the metals and nonmetals with our patented technology

Closed

13-00918

USA or Asia Foo Microbiology Laboratory and Food Chemistry Laboratory need for candy nutritional and microbiology testing of lollipops 10 gram Lollipop Protein Food Additive Following Tests on both products: Microbial Standard Panel - APC (Aerobic Plate Count) - Yeasts & Mold - Total Coliform / E. coli - Staphylococcus (Coagulase +) Heavy Metals Lead Arsenic Mercury Methyl-mercury Cadmium Antibiotic Residue: Ka ...

Closed

13-00894

Major Metal Supplier needs US Materials Laboratory for metals testing including: silver assay, copper analysis, silver nitrate identification testing

Closed

13-00886

North America Materials Laboratory needed for mining testing of mining ore grade mainly for gold & silver and need quick turnaround time. Fire assay and other metal elements for mining

Closed

13-00881

Metallurgical Laboratory needed for gold testing from soil. No. of Sample: 1 sample (50kg) Type of Product: soil Please place price quotations.

Closed

13-00841

Metallurgical Laboratory needed for gold testing including flotation, gravity separation and cyanide leaching?

Closed

13-00824

Asia materials laboratory needed for Thermal conductivity testing for cast iron.

Closed

13-00799

Microbiology Laboratory needed for microbiology testing in Alaska Oilfields of 2 Petri dishes & 3 microslides (biopaddles)

Closed

13-00761

Gypsum and Bentonite drilling mud powder plant needs middle east laboratory for quality control QC raw material testing.

Closed

13-00757

Physical Laboratory needed for cast iron testing: thermal conductivity of cast iron.

Closed

13-00742

USA Metallurgical Laboratory needed for metallurgy testing for Titanium Dioxide, Gold and Platinum

Closed

13-00715

Metallurgical Laboratory needed for soil testing for gold pres metals.

Closed

13-00704

We need a laboratory that is certified to perform Materials needed for ASTM Testing to ASTM C1602/C1602M − 12 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete.

Closed

13-00697

Northeast Tennessee geology laboratory needed for NRCS Testing

Closed

13-00677

South California Toxicology Laboratory needed for toxicity testing for lead, cadmium, for a colorful hand-painted reading glass with matching hand painted hard cases, all manufactured in China on their face, handles it and the case, could be exposed to higher amounts of these types of metals, etc. This would be a one-time test event with a representative sample of the product.

Closed

13-00634

USA materials laboratory needed for mineral analysis: metal and mineral content of my ore. Copper %, Lead %, water % and per cent of other minerals that make up the ore.

Closed

13-00609

USA physical laboratory needed for coal testing for Heating value of mineral coal.

Closed

13-00569

Analytical Chemistry Laboratory needed for bauxite testing: TAT, price and weight samples required for analysis composition by XRF, wet analysis by ICP and reactive silica content in the bauxite samples.

Closed

13-00551

USA analytical chemistry laboratory needed for natural herbal oil testing for paraben presence, Heavy metals,

Closed

13-00531

USA Certified Labs needed for Finished Dietary Supplement Testin: Finished Product Analysis, Ingredient ID, Micro, Heavy Metals, Pesticide Residue

Closed

13-00501

Materials Laboratory needed for Physical Testing: Thermal Conductivity Testing of Rubber Belt

Closed

13-00478

India Pharmaceutical Laboratory needed for USP Testing On HDPE BOTTLES 1)Heavy metals, Non volatile residue, Residue on ignition , Multiple internal reflectance IR ,Light Transmission , Moisture Permeation Thermal analysis by DSC Test as per USP 661 /671

Closed

13-00452

Middle East metallurgical laboratory needed for alloy testing on an additive on Al-Si alloys , and i want do microstructuer analysis which can measure by SEM and XRD , and i need it in acdamic report so , if the company can provide this ?

Closed

13-00390

Asia metallurgical laboratory needed for AAS Testing, OES Testing, Fire Assay and Mineral analyses for gold and base metals

Closed

13-00360

Brazil ISO IEC 17025 Materials Laboratory needed for Materials Testing, metallographical & microscopical/analytical services used for metallurgical failure analysis and if available electrochemical testing. e.g.: polarization curves"

Closed

13-00355

Africa food laboratory needed for fruit testing of baobab fruit pulp powder for levels of calcium, vitamin, heavy metals and all other nutritional information to be rated for SABS standards.

Closed

13-00221

Chemistry Laboratory needed for a quote on developing and validating an ICP-MS method for the trace metals determination in a compound. High Res ICP-MS or ICP-MS with collision cell We would need a complete method that we would own and can be transferred to our lab. There would be about 30 trace elements with a detection limit of 1-5 ppb. One metal will be present in large quantities and does not need to be quantitated but may interfere. May need ...

Closed

13-00206

western USA Materials Laboratory needed for materials testing: -Malvern Particle Analysis -Chemical Composition -Specific Gravity The sample is of High purity silica.

Closed

13-00191

South America Metallurgical Laboratory needed for manganese testing: Sb 6 % I would like to make Mn02 with less 1 % of SB. Can you help with the process.

Closed

13-00170

Middle East Metallurgical Laboratory needed for conducting failure analysis and materials testing in metallic samples.

Closed

13-00169

USA metallurgical laboratory needed for ore analysis. As I can see the sample show a lot of pyrite and maybe galena in small size, but my customer would like to make analysis to know exactly the composition of this sample for future prospection. Can you make this kind of analysis? How much sample do you need (Grams or Kilo)? What the price will be? Can I ship the sample to you once I am in Tucson? P.S. I will be in Tucson (AZ) from the 4 ...

Closed

13-00143

Middle East metallurgical laboratory needed for iron testing of iron ore sample, wa need to know the % of: Fe SiO2 Al203 P S Moisture:

Closed

13-00100

USA or Canada environmental laboratory needed for water testing: test a water sample for potability - metals test, bacterial test

Closed

13-00095

Consumer Products Laboratory needed for Consumer Product Safety Testing: (Microfiber lunch box) we offer is compliant with California Prop 65 and also FDA?s guidelines for food safety. The tests that I need performed for the California Prop are 5 heavy metals (Lead, Cadmium, Chromium, Mercury, and Arsenic) and also 7 Phthalates (DnBP, BBP, DEHP, DnOP, DINP, DIDP and DnHP). As far as the FDA?s guidelines for food safety, I need assistance to deter ...

Closed

13-00074

USA Consumer Products Laboratory needed for FDA Testing and California Proposition 65 testing to ensure Microfiber lunch box is compliant with California Prop 65 and also FDA's guidelines for food safety. The tests that I need performed for the California Prop are 5 heavy metals (Lead, Cadmium, Chromium, Mercury, and Arsenic) and also 7 Phthalates (DnBP, BBP, DEHP, DnOP, DINP, DIDP and DnHP). As far as the FDA's guidelines for food safety, ...

Closed

13-00063

California EPA Environmenal Laboratory needed for EPA 6010 Testing to The California Water Code (CWC)to file a report of waste discharge ((ROWD) (CWC 13260)EPA 6010 testing for copper, lead, zinc & silver as these are the metals in our ore

Closed

13-00026

India geology laboratory needed for metal content testing including precious and rare metal if any in the quarry site.

Closed

13-00017

India Materials Laboratory needed for steel testing for checking magnetic permeability for cold rolled steel sheet 2mm thickness

Closed

13-00011

USA metallurgical laboratory needed for mineral analysis: Mineral composition of Bauxite dust sample

Closed

13-00007

USA EPA 1311 TOXICITY CHARACTERISTIC LEACHING PROCEDURE and EPA 3010a Acid Digestion of Aqueous Samples and Extracts for Total Metals for Analysis by FLAA or ICP Spectroscopy / EPA 6010b INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY

Closed

12-2367

Europe Environmental Laboratory needed for air testing. Four samples of passive air sampling CO CO2 SO2 NOx O3 VOC HAP Heavy metals Dust Eight samples of soil: Arsenic (As) Acidity (pH-H2O) Barium (Ba) Chloride (mercurometric) mg/kg dw Cadmium (Cd Sulphate (SO4) mg/kg dw Calcium (Ca) Total Petroleum Hydrocarbons Chromium (Cr) TPH (C6 - C40) Cobalt (Co) Aromatic Hydrocarbons Copper (Cu) Benzene Lead (Pb) Ethylbenz ...

Closed

12-2360

INndia ISO metallurgical laboratory needed for High Purity Quartz Sand Elemental analysis for Quartz Sand needed Al,B,Ca,Fe,K,Li,Mg,Mn,Na,Ti

Closed

12-2346

Asia metallurgical laboratory needed for metas testing. Must be able to test and verify FE%, moisture%,Specific Gravity, Proctor Density and other trace elements.

Closed

12-2303

USA analytical chemistry laboratory needed for waste testing: BTU content of waste derived ash (solid)

Closed

12-2300

Preference for New Jersey Laboratory needed for Eddy current inspection of 5 mm diameter steel bars to check for surface defects

Closed

12-2278

UAE plastics laboratory needed for rubber testing: quality checking of rubber used in conveyor belts for maximum long life . for stone crushing company in uae . We would like to know if you provide services for testing of the quality of material used in conveyors depending on which we will decide whther to purchase the conveyors belts of a particular brand or a dealer . This is important to us as we spend a large amount of money on purchasing co ...

Closed

12-2270

USA ISO compliant; preferably ISO-17025 Environmental Laboratory needed for Content analysis of the following 17 rare earth metals content (mg/Kg) on sand matrix 2 samples.: 1. (Sc) Scandium 10. (Gd) Gadolinium 2. (Y) Yttrium 11. (Tb) Terbium 3. (La) Lanthanum 12. (Dy) Dysprosium 4. (Ce) Cerium 13. (Ho) Holmium 5. (Pr) Praseodymium 14. (Er) Erbium 6. (Nd) Neodymium 15. (Tm) Thulium 7. (Pm) Promethium 16. (Yb) Ytterbium 8. (Sm) Samarium ...

Closed

12-2264

USA metallurgical laboratory needed for cooper testing. powder form of copper for purity and quantity that can be obtain from this material and also a rock form of copper to have same testing done

Closed

12-2261

South Africa Pharmaceutical Laboratory needed for gravimetric, analytical testingfor SANAS accreditation. 6 Inhalable Aerosol samplers that will be rotated 3 times with the impinger in the middle. This gives us a total of 126 samples. We are looking at getting as much information as possible out of our samples and would like know how much the analyses would cost as well as when, in the new year they can be done. The following information ...

Closed

12-2230

Midwest USA Analytical Chemistry Laboratory needed for API Testing, ASTM Testing Hydrocarbon analysis: hydrocarbon, fats, oil and grease, biosolids MIU, FFA, TFA, Fatty acid profile, sludge analysis, minerals, heavy metals

Closed

12-2211

Eastern USA metallurgical laboratory needed for certification analysis of Coltan, Recovered from my mine site in West Africa.

Closed

12-2187

UK FDA GMP / GLP Pharmaceutical Laboratory needed for Raw Material Testing: Galantamine HBr Heavy metals G testing required to current EP monograph EP7.5, which requires a laboratory microwave oven. One sample to be tested

Closed

12-2185

Geochemical Laboratory needed for geochemical analysis of geochemical exploration samples XRF,AAS, for pre-prepared streamsediment, soil and rock samples

Closed

12-2174

China geology laboratory needed for Laboratory test of physical, chemical content of ore sample, especially mineralization chemical structure Technological tests of benificiation methods

Closed

12-2158

Colorado Metallurgical Laboratory needed for soil testing for precious metals. 70 different samples of dirt concentrate for gold, silver, palladium, and rhodium.

Closed

12-2137

Asia geophysical laboratory needed for Uniaxial compression testing of rock core samples. Direct shear testing of core samples

Closed

12-2129

EU Environmental Laboratory needed for metallurgical testing of Heavy metals according to the standard EN 1302, Chemicals used for treatment of water intended for human consumption- Aluminium based coagulants-Analytical methods

Closed

12-2105

Asia geology laboratory needed for geophysical testing of andesitic rock for mpa and abrasion index and unconfined compressive strengths

Closed

12-2098

Geology Laboratory needed for IMSBC 2012 testing: Penetration Test and Proctor /Faberger Test for sample of Iron ore Fines Hematitic natural mineral

Closed

12-2050

Africa Metallurgical Laboratory needed for iron ore testing: Chemical Analysis and Mineralogical Study of Iron Ore especially with respect to Phosphorus

Closed

12-2034

Metallurgical Laboratory needed for metal analysis: analyze the metal polishing dust the test I need is called CAM 17 METAL

Closed

12-2030

Mexico metallurgical laboratory needed for analysing rocks form a mine

Closed

12-2011

China Metallurgical Laboratory needed for alloy testing: need to know components of some bronze alloy

Closed

12-2008

Africa Mining Laboratory needed

Closed

12-1950

New York metallurgical laboratory needed for heavy metal analysis for Arsenic, lead and mercury

Closed

12-1927

Estonia / Finland metallurgical labroatory needed for mineral analysis of drying and grinding copper mineral

Closed

12-1926

India Geology Laboratory needed for columbite-tantalite material testing. want full assay report

Closed

12-1911

Eastern USA metallurgial laboratory needed for Analysis of one sample of metal or alloy found in an archaeological dig at site of former iron foundry in NYC. Material found in crucible-

Closed

12-1872

New York EPA Geology Laboratory needed for iron ore testing, gold testing, silver testing, any other rare earths testing, and carcinogens

Closed

12-1856

Metallurgical laboratory needed for mineral analysis: 4 samples per week. Mainly, Iron ore samples. The elements to analyze are: Total Fe, FeO, Fe2O3, Al2O3, SiO2, P, S.

Closed

12-1828

USA geology metallurgical laboratory needed for ore testing: full sample analysis of 20 samples (raw ore concentrates from US & Canada)

Closed

12-1819

Africa metallurgy laboratory needed forprocess development for phosphate and sulfides minerals in Tunisia and in Africa.

Closed

12-1791

Analytical Chemistry laboratory needed for minerology testing in dry powders. CaO, Sio2, Al203,MgO Na210/k20, TiO2, Zr20. all samples msut allso have LOI' indicated"

Closed

12-1752

USA veterinary medicine laboratory needed for Atomic absorption spectroscopy testing. Test multiple samples of horse hoof horn and body hair samples for selected heavy metals (e.g., Cd, Pb, As, Zn)

Closed

12-1748

Mining company needs metallurgical laboratory for metals testing of samples of black sand/ gravel from sierra Leone (1-5kg) that we wish to have tested for earth metals for metals. 1. Scandium Z. 21 Symbol Sc 2. Yttrium Z. 39 Symbol Y 3. Lanthanum Z. 57 Symbol. La 4. Cerium Z. 58 Symbol Ce 5. Praseodymium Z. 59 Symbol Pr 6. Neodymium Z. 60 Symbol Nd 7. Promethium Z. 61 Symbol Pm 8. Samarium Z. 62 Symbol Sm 9. Europium Z. 63 Symbol Eu 10. Gadolini ...

Closed

12-1744

Metals company needs Accredited laboratory that is capable of performing millipore testing.

Closed

12-1703

Middle East analytical chemistry laboratory needed for DIN Testing. Talc powder property Testing to DIN methods Whiteness Ry DIN53163 CIE L*, a*, b* DIN 6174 Yellowness index DIN6167 Specific surface area BET,ISO4652 Packed bulk density ISO 787/11 Loose bulk density EN1097/3 Moisture ISO 787/2 PH ISO787/9 Oil absorption ISO787/5 Particle Size distribution Top cut(Danalysis for 98) Average PS(D50)

Closed

12-1702

California Metallurgical Laboratory needed for particulate testing from Diesel Particulate Filter cleaning machine that extracts soot and ash. We would like to know if our test samples contain any precious metals.

Closed

12-1700

USA Oil Laboratory needed for petroleum testing nad heavy metals testing. Need to determine if heavy metals (mercury, lead, cadmium) and/or petroleum compounds are present in a sample.

Closed

12-1599

Bioanalytical Laboratory needed for polysaccharide testing: polysaccharide content, alpha & beta glucan content, adenosine content, cordycepin content, adenine content, hydroxyethyl-adenosine, ethyl-adenosine content;2)Microbiological analysis; 3) Heavy Metals analysis

Closed

12-1580

Southern California Metallurgical Laboratory needed for Precious Metals and Minerals Testing Please analyze and test ore sample for Platinum and other precious metals content. One sample only.

Closed

12-1576

Central USA Environmental Laboratory needed for EPA Water Testing: Gold in Water by EPA 200.7, Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Spectrometry

Closed

12-1572

India Geology Laboratory needed for rock testing Limestone, Dolomite , Iron & Manganese (20 - 30 Samples) has been collected from my field work. And required analysis of the same samples (whole rock analysis) by XRF method. So required details for the following points: of the procedure to obtain the service from your laboratory, 1) sample preparation with charge / sample 2) Analysis of samples and report generation and charges 3) Rock sample size ...

Closed

12-1568

Europe Geology laboratory needed for Geochemical analysis of rocks for gold determination (in bpm)"

Closed

12-1552

Analytical Chemistry Laboratory needed for ANSI 61 certification, Certification of Chemicals and Products for Purity. Please specify the cost of the testing for this certification in your response.

Closed

12-1510

USA FDA cGMP medicinal chemistry laboratory needed for dietary supplement testing of oft gel encapsulated Omega-3 fish oil dietary supplement. Test categories: 1. Identity testing and capsule fill weight 2. Fatty Acid Composition (profile). As a minimum: total Omega-3, EPA and DHA, Saturated Fat, Trans Fat, Cholesterol. Potentially - also other Omega-3s, total triglycerides etc; 3. Nutritional Value (vit E, D, A and iodine), 3. Oxidation: ...

Closed

12-1484

India Metallurgical Laboratory needed for copper testing for Oxygen content in the copper bar.

Closed

12-1472

USA geology laboratory needed for basalt rock testing for the contents of basalto rock in the form of oxides

Closed

12-1450

Exploration Company needs geology laboratory for graphite testing of 10 pieces of natural graphite. Each one is over 2-2,5kg. Testing for all propertie such as percent of carbon content, size in mesh, and other related things?

Closed

12-1438

Tunisia and Africa Geological Laboratory needed for process development for phosphate and sulfides minerals in Tunisia and in Africa.

Closed

12-1434

Africa Geology Laboratory needed for gold testing from soil samples address: box 2704 mombasa

Closed

12-1429

Physical Laboratory needed for Hot Oil Flow Testing of P/N 365525: Flow rate of .95-1.05 GPM of MIL-L-7808 @ 230-250 PSIG and 250?-300?F Fixture will be provided.

Closed

12-1420

Europe or USA Geology Laboratory, Metallurgical Laboratory needed for ore testing for the amount of tin in the Ore rock eg ,Sn 99% . Purity of the tin in the ore .

Closed

12-1419

Europe EcoToxicology Laboratory needed for Toxicology testing: TOXICITY, ECOTOXICITY, SENSITIZATION. toxicological evaluation of 2 type of ore concentrates. Would that be possible in collaboration with your laboratory? The nature of the samples is solid, in powder form, Lead and Zinc Sulfide concentrates. Lead concentrate is practically PbS containing 70% Pb and a moisture level of <2% Zinc concentrate is practically ZnS containing 55% Zn ...

Closed

12-1410

Canada Food Packaging Laboratory needed for CONEG Testing: Heavy Metals Testing

Closed

12-1405

Agriculture Laboratory needed for fertilizer testing of basalt rock from quarry for fertilizer quality.

Closed

12-1401

Europe ISO Accredited Environmental Laboratory needed for wastewater testing to ISO and DIN methods. The phenolic waste water Parameters:Biochemical Oxygen Demand (BOD7),Chemical Oxygen Demand (COD),Total Phenols (Phenol Index),Dissolved Organic Carbon (DOC),Total Organic Carbon (TOC),Total N(Kjeldahl),Conductivity,Total Dissolved Solids (TDS),Total Suspended Solids (TSS),pH,TotalP,CN,Cl,NH4,SO4,NO3,Metals

Closed

12-1396

Africa Metallurgical Laboratory needed for process development testing for phosphate and sulfides minerals in Tunisia and in Africa. "

Closed

12-1387

INDIA METALLURGICAL LABORATORY NEEDED FOR METALLURGICAL TESTING: METALLURGICAL MICROSCOPE-06 NOS SAMPLE SPECIMEN FOR FERROUS AND NON FERROUS-06 NOS MAGNETIC PARTICLE TEST-02 NOS BELT POLISHING MACHINE-01 LAPPING MACHINE -01 SAMPLE SPECIMEN -10 NOS

Closed

12-1370

Europe Environmental Laboratory needed for sludge testing for Sludge treatment plant -twice a year 2 samples Heavy Metals- Atomic absorption Spectroscopy Organic Mater-Ignition loss, incineration Dry mater - gravimetric determination Total Nitrogen/Amonia - Kjeldahl-method Phosphorous- nuclear magnetic resonance spectroscopy AOX - Incineration activate carbon, microcoulometric titration Potassium and magnesium - Atomic absorption Spectros ...

Closed

12-1359

Geology Laboratory needed for graphite testing: 10 pieces of natural graphite. Each one is over 2-2,5kg tested natural graphite such as percent of carbon content, size in mesh, and other related things?

Closed

12-1356

EUROPE ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR CHEMICAL ANALYSIS, MOISTURE AND SIEVE TEST FOR QUARTZ.

Closed

12-1350

Western US geology laboratory needed for core testing: Core tests including Triaxial tests, UCS tests, m and s, brazillian tests, used for stress modelling

Closed

12-1340

Electrical Laboratory needed for electrical resistivitytesting of pure Copper (20 °C) 16.78 nΩ·m. The Copper pen-size bar was already treated through a special process, namely Equal Channel Angular Pressing, and we want to examine the effect of our process on its electrical features. In other words, I want to know how much it changes in terms of electrical resistivity. Does any one have such a sensitive equipment to measure an extremely sma ...

Closed

12-1321

Europe ISO accredited coal testing laboratory needed for quality testint to determine the quality characteristics of coal, namely: -Total moisture, % -Ash (as received and dry basis), % -Total sulfur (as received and dry basis), % -Volatile matter (as received and dry basis, dry ash free basis), % -Net Calorific Value (as received basis), kkal/kg -Gross Calorific Value (as received and dry basis, dry ash free basis), kkal/kg -Petrogr ...

Closed

12-1317

FDA GMP EPA Microbiology Laboratory needed for AOAC Testing: TOC (AOAC 993.13), Volatile Solids EPA 160.4, Aerobic plate count FDAIII, Total mold Count FDAXVIII, Yeast, Heavy metals analysis EPA 200.8 & 7470, x-ray diffraction, SEM and microscopic analyses for particle sizing and morphology

Closed

12-1307

South America Clinical Laboratory needed for Heavy metals testing and chemical element analysis

Closed

12-1276

China analytical chemistry laboratory needed for propylene glycol testing: Parameter ID A: IR adsorbtion ID B: Limit of diethylene glycol and ethylene glycol ID C: Retention time confirmation of propylene glycol from ID B Assay of Propylene Glycol Residue on ignition Chloride Sulfate Heavy Metals Specific Rotation Acidity Water Determination

Closed

12-1234

Environmental laboratory needed for wastewater testing of slurry . Now we want to test this waste material in laboratory for purpose: 1) what is elements present in waste material 2) is it fully waste for us or it contains any material so that we can use in future.

Closed

12-1221

Gulf Country Metallurgical Laboratory needed for ISO Testing and ASTM Testing: 2 Nos Quartz Samples to be tested for %Gold and %Silver

Closed

12-1200

USA FDA GMP Analytical Chemistry Laboratory needed for GMP ICP-MS Testing: metals analysis of ortho-carborane (I will forward the specifications via email)

Closed

12-1196

ISO Middle East Metallurgical laboratory needed for Quartz Testing. Samples to be tested for Gold and Silver Two Samples

Closed

12-1189

Middle East Food Laboratory needed for vegetable testing: radiation 2 - preservatives 3 - focus on each unit 4 - percentage of pesticides in vegetables 5 - Analysis of the dyes 6 - carcinogens 7 - Date of expiry 8 - the meat of disease-free 9- Determination of heavy metals and toxic

Closed

12-1176

Asia Metallurgical Laboratory for gold testing in rock.

Closed

12-1157

Nearby SOuthern Caliifornia Metallurgical LaboraChromite ore analysis Full analysis of ore for it composition

Closed

12-1115

Metallurgical materials laboratory needed for coefcient of hygroscopic expansion testing for silo,urgently.If you have facility for this test in your lab, kindly inform us immediately. Thank you sir. "

Closed

12-1107

Food Contact Manufacturer (Paper 1/2PE coated paper cups.Polystyrene lids,PP Cups,Paper Plates. needs food laboratory for migration and heavy metals testing to American/European standards for migration/heavy metals.

Closed

12-1066

Asia clinical laboratory needed for immunological testing for type-IV allergy to metals and other common substances from a single blood sample.It needs permission for radioactivity.

Closed

12-1028

CANADA METALLURGICAL LABORATORY NEEDED FOR GOL DTEST FOR GOLD CONTENT IN AGGREGATE SCREENINGS

Closed

12-1015

Russia medicinal chemistry laboratory needed for herbal extract testing. Residual Testing, Microbiology Testing and Heavy Metals Testing of Senna Leaf Extract (Cassia angustifolia) for Residual tests, Heavy metals and Microbiological tests.

Closed

12-0964

Taiwan nuclear chemistry laboratory needed for radiation testing to determine Gamma ray radiation from High Carbon Ferro Chrome

Closed

12-0943

Europe FDA GMP Analytical chemistry laboratory needed for EP, EMA and USP API Testing of Oil based API. Analytical: HPLC, Water Content, ROI, Heavy Metals, Residual Solvents. Micro: Possibly a seperate lab to the above for this.

Closed

12-0931

USA geotechnical laboratory needed for ASTM Testing: Air Permeability to (ASTM 6539)

Closed

12-0893

Mechanical Laboratory needed for ASTM Testing to ASTM E9: Compression testing for flat thin Magnesium sheets. 10 samples of 1"x3"x0.063" 10 samples of 1"x3"x0.080"

Closed

12-0851

United Kingdom Metallurgical Laboratory needed for CHARPY TESTING of steel S355JH for -40degree to EN 10025, PFC 150x75x18, S355JH

Closed

12-0763

Materials Laboratory needed for ASTM Testing: COKE PROXIMATE ANALYSIS Total Moisture, ar - % Ash, ar - % Ash, dry - % Volatile Matter, ar - % Volatile Matter, dry - % Gross Calorific Value, ar - Btu/Lb Gross Calorific Value, dry - Btu/Lb Gross Calorific Value, ar - Kcal/Kg Gross Calorific Value, dry - Kcal/Kg Total Sulfur, ar - % Total Sulfur, dry - % Hardgrove Grind. Index Analysis performed in accordance with ASTM standards. Please send us a q ...

Closed

12-0757

China, India Mining Laboratory needed for preferential precipitation testing of cassiterite ultrafine particles (less than 20 micron) in the process of densification of tinny mineral suspension. As the most part of flocculent don¡¯t exhibit selective properties, and precipitate of both effective and non effective minerals ultrafine particles in slimer. use flocculent that precipitates only cassiterite ultrafine particles in slimer. Howev ...

Closed

12-0707

USA food analytical chemistry laboratory needed for Metals Testing (or just lead testing depending on cost) of turmeric samples (50-100).

Closed

12-0699

Asia or US Pharmaceutical Analytical Chemistry Laboratory needed for USP & EP Eugenol Monograph Testing all Eugenol USP parameters as mentioned in newest USP monograph, included there : Solubility in 70% alcohol, Relative density, Distilling range, Refractive index, Heavy metals, Hydrocarbons, and Limit of phenols. Also testing for related compounds test (GC) and Dimeric and Oligomeric compounds test from the EP Eugenol monograph (EP 4, 1165 o ...

Closed

12-0673

University Engineering Research and Development Laboratory needs geophysical laboratory for Cerchar Abrasivity Index test on 8 samples.Laboratory needed for this tests.

Closed

12-0653

Asia environmental chemistry laboratory needed for ASTM metallurgical analysis. Performing 48 or 51 element ICP-MS and / or AAS analysis on whole rock and stream sediment samples 2.Fire Assay 30g for gold.

Closed

12-0647

Colorado Metallurgical Laboratory content of any precious metals in our gravel pit to determine value of mined products

Closed

12-0644

Canada NIOSH, OSHA, EPA Industrial Hygiene Laboratory needed for NIOSH, OSHA Industrial Hygiene Testing for amount of bituminous coal on repairable dust ...maybe we can take a pump let run for many horas to collect a lot of repairable dust ( NIOSH 600 ) and then do the analysis for % of bituminous coal dust ...so we can do just regular repairable dust and say that in these samples we have XXX mg or ug amount of bituminous dust..Do you have un a ...

Closed

12-0627

SE USA Mining Laboratory needed for ASTM TEsting, Quality Control Testing for cement limestone quarry operation

Closed

12-0524

Utah Metallurgical Laboratory needed for soil testing and liquid testing for precious metal parts per million

Closed

12-0523

Canada Geochemistry Laboratory needed for zeolite test new and used 3A Zeolite for H2O and CO2 storage capacity (gas phase). Preferably located in Canada

Closed

12-0495

India or China Metallurgical Laboratory needed for extraction wolfram in the form of ammonium paratungstate (APT) or another product.

Closed

12-0480

Egypt ISO Physical Laboratory neede for ASTM Precious Metals Fire Assays Testing

Closed

12-0468

Honduras Environmental Laboratory needed for water quality testing for biological, arsenic, metals, turbity, amount of chlorine

Closed

12-0447

India Metallurgical laboratory needed for elemental analysis, Titanium Testing for elements and their quantity content.

Closed

12-0436

Geophysical laboratory needed for Geophysical Measurements 30 core Samples, Tests Required Primary Wave Velocity Secondary Waves Velocity Dielectric Permittivity Electrical Resistvity Magnetic Susceptibility

Closed

12-0433

South Africa Metallurgical laboratory needed for testing zinc ashes.ASAP.

Closed

12-0419

Food Laboratory needed for Food Packaging Testing, Migration Testing for Food Contact Surfaces (polymers, adhesives, metals, lubricants, colorants, plastics, papers)

Closed

12-0413

Canada or USA Food analytical chemistry labroatory needed for analytical chemistry testing on food colour primary. IE Pure dye content Subsidiary Dye content Heavy Metals Water Insolubles Intermediates Combined ether extract Arsenic Lead

Closed

12-0412

Asia FDA GLP Food Laboratory needed for USP analysis for congeners present in a sample such as ethyl carbamate, furfural, diacetyl, 2,3-pentanedione, aromatic hydrocarbons and heavy metals present

Closed

12-0408

Materials Laboratory needed for particle testing: iron and manganese oxide particles and would like to get an idea of particle size distribution.

Closed

12-0381

Canada Metallurgical Laboratory needed for chromium ore testing.

Closed

12-0373

Mexico Geology Laboratory needed for geological report testing: mixed minerals such as gold, silver, cooper & iron Ores Geological report

Closed

12-0361

India ISO Materials Laboratory needed for andalusite testing. 1400 degree centigrade of the powdered andalusite sample for 24 hours

Closed

12-0356

West Coast USA metallurgical laboratory needed for iron content testing

Closed

12-0346

Canada Bioanalytical Laboratory needed for metals testing in frozen moose liver and kidney samples collected as part of a hunter return program and we are interested in testing the kidney samples for Cadmium specifically, then for liver samples we are looking for a heavy metal panel that will include heavy metal penel (Arsenic, Cadmium, Cobalt, Chromium, Copper, Iron, Manganese, Molybdenum, Lead, Zinc, Mercury etc) as well as a salt panel ( ...

Closed

12-0316

South Africa environmental laboratory needed for ICP-MS drinking water testing for the presence of all 14 rare earth metals, including uranium and thorium in 8 groundwater samples (boreholes) and 2 well-samples

Closed

12-0308

USA FDA GMP analytical chemistry laboratory needed for 21 CFR/GMP compliant service for the new USP Heavy Metals Testing procedures.ICP-OES and/or ICP-MS capabilities.

Closed

12-0241

India NABL Geology Laboratory needed for materials testing of civil material like sand , coarse aggregate, reinforcement steel etc.,

Closed

12-0231

Health Canada and FDA GMP Analytical Chemistry Laboratory needed for chemical Identification testing of Menthol and the chemical contaminant testing for residual solvents, pesticides and heavy metals. Sample size 3 Lots: 3

Closed

12-0189

Asia Metallurgical Laboratory needed for metal testing: composition of metals one sample, of unknown alloy, non-magnetic, non corrosive, heavy metal (approximately twice specific gravity of steel), malleable, silver to gold in color. This item is a Tibetan Ritual item.

Closed

12-0154

Egypt environmental laboratory needed for ISO, CEN, AFNOR, BSi, ASTM sediment anlysis of marine sediment samples Grain size Water content Total Organic Matter (TOM) Total Organic Carbon (TOC) Total Nitrogen content Total Phosphorous content Total Petroleum Hydrocarbons (TPH) Aliphatic hydrocarbons if TPH measurement is above detection limit Mono Aromatic hydrocarbons (BTEX) if TPH measurement is above detection limit Polycyc ...

Closed

12-0136

Southeast Asia UKAS Metallurgical laboratory needed for metal surface analysis(Corrosion level & current conductivity) To test effect of aerosol generated from a solid propellant onto metals such as copper bar, mild steel and plactics such as perspex.Test for corrosion on the surface and current conductivity after various time periods.The product is used as fire fighting suppression in electrical substation and generators.

Closed

12-0117

USA Food Laboratory needed for protein powder / meal replacement testing for: (1) does it have the calories, minerals etc that it says it has and (2) testing for heavy metals / deleterious elements

Closed

12-0116

Metallurgical Laboratory needed for hydrometallurgical testing, Leaching of precious metal ore sample (solids) with sodium cyanide solution to determine precious metal extraction rates. Analysis of solids and Liquids for Au; Pt; Pd; Ag

Closed

12-0098

Southern California Metallurgical Laboratory needed for gold and silver testing of old gold and siver mine tailings piles for gold and silver content.we will be testing 20 tailings piles.

Closed

12-0087

India Physical Laboratory needed for bending testing on cold formed steel beam for study of bending behavior by using computerize system with LVDT, DIAL GAUGE etc

Closed

11-2747

West Coast USA FDA GMP Packaging Laboratory needed for FDA Packaging Testing of Paper Packaging 1. Extractables 2. Biological 2. PAH,pcb, pesticides, semiVOL, Vol 3. dioxin 4.Heavy Metals/CONEG

Closed

11-2682

Geophysical Laboratory needed for compressive strength testing of rock sample in MPA and also the geology type of the sample.

Closed

11-2659

Preclinical Laboratory Contract Research Organization needed for preclinical testing studies for skin sensitivity to Aluminum: In-Vitro (lymphocyte) testing with solid or soluble Aluminum/metals.

Closed

11-2622

Large Metals Company needs physical laboratory for dual moment testing for weld integrity testing and based on a set of given parameters, what the timeframe and cost of such testing would entail. Thank you in advance.

Closed

11-2616

Metallurgical laboratory needed for metal testing: super high grade zinc, low carbon steel and galvanizing bath sample,

Closed

11-2614

Metallurgical Laboratory needed for metal testing for Determination of percentage of retained austenite in hardened and tempered 440C stainless steel

Closed

11-2589

Microbiology Laboratory needed for IS microbiological testing of Coal Tar Tape as per IS:15337-2003

Closed

11-2586

USA analytical chemistry laboratory needed for palladium testing and differentiation between Pd(0) and Pd(II)? If you cannot differentiate between the oxidation states of metals, do you know if it is even possible?

Closed

11-2552

Geology Laboratory needed for ore testing of low grade Iron Ore 35 % Fe (Total Fe2O3 = 55 %), which we want to concentrate to above 65 % Fe. For this purpose we need to install an Iron Ore Beneficiation plant of 150 t/h capacity, with most appropriate combination of latest processes, by the help of your expertise in this field. Just to start with, we need a complete physical, chemical, mineralogical, magnetic and other necessary assessment test ...

Closed

11-2540

Bangalore Metallurgical laboratory needed for Physical properties testing 2) Mechanical properties testing of aluminium sheets 4mm thick

Closed

11-2527

California Geology Laboratory needed for In-organic chemical analysis of Geological Oxides.(Silicates, Limestone)

Closed

11-2514

Canada or USA Geology laboratory needed for metallurgical testing Cyanide roll of gold ore from California

Closed

11-2495

Metallurgical Laboratory needed for Tensile testing for rebar under BS4449 and BS7777 Tenstile testing for steel reinforcement bars under cryogenic temperature up to -170degrees.

Closed

11-2494

USA or Canada Toxicology Laboratory needed for Toxicology Testing, LD50, Rat ingestion of liquid samples for toxicology. 10 samples or less

Closed

11-2485

Canada geology laboratory needed for impurity Analysis of impurities on copper cathodes (99.99% Cu). The impurities and their levels are as follows: Ag 2 ppm, Co 2 ppm, Fe 2 ppm, Pb 1 ppm, S 1 ppm. Please notice that I gave you lower limits. If your lab is able to analize even lower concentrations would be perfect.

Closed

11-02480

Metallurgical Laboratory needed for mineral analysis of EDTA (ethylenediamine tetraacetate), cyanuric acid, copper, boron, sodium chloride,sulfate, phosphate.

Closed

11-02470

India Physical laboratory needed for high strain testing of metals, composites and ceramics in and around India. Could be South Africa, Australia, Singapore or even U.S. Do you have contact information of such labs. The output required is stress-strain curve The strain rates or in the order of 1000 per sec (1000 / s) or impact velocities are in the order of 2000-5000 ft/s. Apparently these have to be done with wave propagation method than servo h ...

Closed

11-02445

Utah FDA GMP EPA Microbiology Laboratory needed for AOAC Testing: TOC (AOAC 993.13), Volatile Solids EPA 160.4, Aerobic plate count FDAIII, Total mold Count FDAXVIII, Yeast, Heavy metals analysis EPA 200.8 & 7470, x-ray diffraction, SEM and microscopic analyses for particle sizing and morphology

Closed

11-02442

USA Metallurgical Laboratory needed for VCI corrosion testing. Need to determine the amount of VCI found on the samples we give you.

Closed

11-02419

Southern California Geology Laboratory needed for testing mining samples in San Bernadino County Southern California mber: address: Reisters Town Road, North Port FL

Closed

11-02396

Geotechnical Laboratory needed for geomechnical Testing of consolidated sands (indurated sands) for mechanical resistance, preferably shear resistance or resistance to an abrasive force. Standard ASTM 17892 (part 10 maybe) might be applicable.

Closed

11-02370

Asia geology lbaoratory needed for RO, GC- GC MC-Source rock evaluation testing

Closed

11-02351

Metallurgical laboratory needed for ore testing: tantalite ore and would like to have a quantitative analysis done on the samples to determine the possilbe mineral content

Closed

11-02348

United Kingdom analytical chemistry laboratory needed for heavy metals testing of Reishi Mushroom Spore powder for heavy metals such as mercury, arsenic and lead, steroids and any other harmful substances as well as if the powder is 100% genuine. Please advise if you can provide such a test results, how do I send a sample and what would be the cost. Thank You Kindest Regards Audrius Simkus

Closed

11-02326

I need testing done on a copper screen mesh to find out what was trapped on it

Closed

11-02318

USA Production Chemistry Laboratory needed for Electrical stability testing of synthetic based drilling muds

Closed

11-02316

Government needs ISO 17025 geology laboratory for ASTM Testing, ASTM C110 for limestone

Closed

11-02310

Materials Laboratory needed for minerals analysis

Closed

11-02303

California analytical chemistry laboratory needed for release agent testing to determine if release agent will have an effect on downstream processing at a gold mine using Carbon In Pulp process to extract gold.

Closed

11-02291

Utah geotechnical laboratory needed for geotechnical testing: moisture-density, gradation, atterberg limits, triaxial compression, direct shear, consolidation, minimum resistivity

Closed

11-02279

Africa Metallurgical Laboratory needed for Magnesite testing of 20 different samples.

Closed

11-02260

Amsterdam Metallurgical Laboratory needed for Gold Purity Test for 3 different 20 gram samples

Closed

11-02259

Environmental laboratory needed for Rare Earth Elements testing.

Closed

11-02247

California NIOSH Industrial Hygiene Laboratory needed for NIOSH industrial hygiene testing of manufacturing plant workers for Airborne metals, dust, carbon monoxide , we would like to test for lead, copper, and nickel.

Closed

11-02206

Metallurgical Materials Laboratory needed for flashpoint testing: Flux for a flash point. (Solvent base flux system used internally for the final product).

Closed

11-02198

India Geochemical laboratory Oil field chemical analysis for scale,corrosion inhibitor and demulsifier efficiency testing efficiency of scale inhibitor. Dynamic wheel test for corrosion inhibitor and bottle test for demulsifier.

Closed

11-02142

Steel manufacturer needs India metallurgical laboratory for failure investigation testing of customer complaints to determine the reason for the faillure i.e. material defect or the customers mistake. Because it is difficult for us to depute a person from the plant to resolve the complaint. The nature of complaints are mainly as follows. Chemisrty variation / Surface cracks / Mix up / Hardness variation / Faillure in mechanical propert ...

Closed

11-02117

Large conglomerate needs Africa analytical chemistry laboratory for Raw material testing (Iron Ore, Coal & base metals). Please submit your laboratory profile, lab capacity(Number of sample/day for Iron Ore & Coal) and list of Lab Accreditations at the earliest.

Closed

11-02113

Environmental laboratory needed for APHA, EPA, ASTM, UKAS, DIN Testing, soil testing and water testing (soil and water contaminated by oil products) 1) SOIL SAMPLES: o GRO for C4 to C12 o MTBE o Benzene o Toluene o Ethyl Benzene o Xylene o TPH - aliphatics and aromatics o Volatile organic compounds BTEX and MTBE o Ployaromatic hydrocarbons (PAH) o Metals - As, Cd, Cr, Cu, Ni, Zn, Pb, Hg and Se 2) GROUND WATER SAMPLES: o Inorganic indica ...

Closed

11-02102

USA Analytical Chemistry Laboratory needed for ASTM Testing on oils: sulfur analysis, phosphorus analysis, and metals analysis on 2 types of oil. 1) raw (unrefined or refined) plant oil, Camelina and Carinata oil; 2) processed crude oil

Closed

11-02079

Importers of Post-Consumer PET flakes needs quality control lab to test PET from various sources to help us qualify their quality control. Primarily we would be testing for contamination in PPM's for; PVC, metals, Olephins, ETC. as well moisture %. In some cases we would also be looking for B* value and IV testing as well. Would you also please provide turnaround time to test a hand sample and cost to perform these tests.

Closed

11-02050

Middle East Geochemical laboratory needed for ISO Testing, chemical analysis using microprobe analysis 36 samples of granitic rocks rich in iron

Closed

11-02011

Middle East Environmental Toxicology Laboratory needed for Toxicity Testing according to Toxicity Characteristics Leaching Procedure As per US EPA SW846 Method 1311.

Closed

11-02005

South Africa geotechnical laboratory needed for ASTM Testing: uniaxial compressive strength, tensile strength and shear strength of bore core samples

Closed

11-01983

Metallurgical Laboratory needed for metallurgical analysis of Rare earth

Closed

11-01982

ISO17025 certified Electrical Laboratory urgently needed for IEC Testing IEC 62271 heat rising test on an electrical component. The component itself is a slipring body for a mining shovel running on 7.2kV, rated for 400A. According to our CSA inspector international test requirements are a ISO17025 certified laboratory able to perform test according to IEC 62271. As this product is for Canada maybe also a CSA related standard could be applied. Pl ...

Closed

11-01973

Metallurgical Laboratory needed for alloy testing of platinum bar in plastic packaging.

Closed

Submit Metals Testing Requests for Metals testing and Metals Scientific Research