Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Me Laboratories to perform their Me Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Me laboratory that would like more information on these Me projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Mining operation extracting silver and gold needs cyanide bottle roll and size distribution test on some mine tailings to determine process and system cost. How many samples and what sample size will be required to complete the process? We are extracting silver and gold.
Food laboratory needed for microbiology and shelf-life testing of refrigerated beverage to be sold at 7-Eleven stores. Product testing is divided into two levels. Level I Testing, which is for pathogenic micro-organisms may be done from composite testing. Composite testing is where all the samples are blended together and then tested as one entity. Since the presence of any microorganisms identified in Level I is prohibited, this is a cost eff ...
Physical Laboratory needed to perform weathering testing on our plastic according with VW standard PV 3930. Exposure time should be 1500 h. We do not need evaluation after test. Second specimen should be tested according with Nissan standard (NES) M0135: Table 3 Method 1-II-2 for 1000 h, without evaluation. Please send us an offer for these two tests. Thank you.
Medical Device Product Safety Laboratory needed for all biological testing for latex based medical devices with colorants needed for CE mark, FDA, ISO 13485 and Japanese biological safety requirements. Our products contact mucosal surfaces for weeks. May also need microbiology testing for sterilization.
Need laboratory testing for VOC content in adhesive material to comply with SCAQMD rule #1168, shall be determined by USEPA'S Test Method 18, or Air Resources Board (ARB) Method 422 for the determination of emissions of Exempt Compounds and USEPA's Test Methods 25, 25A, SCAQMD's Method 25.1, or SCAQMD Test Method 25.3. (Determination of Total Gaseous Non- Methane Organic Emissions as Carbon)
FDA GMP Food Laboratory needed for migration and extraction testing of BOPP Film Food packaging (Over all migration & Specific migration & NIAS-TNNP & heavy metals &FDA extraction as per (USA FDA 21CFR Section 177.1520) ) for our BOPP products based on the EU10/2011 and it's amendments 2015 & 2016 updates 2015/174 & ?1416-2016?.
Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc: 1. Temperature & latitude test as per DO 160 Section 4 Category -B3. 2. Temperature Variation test as per DO 160 D Section 5 Category-A. 3. Fluid Suceptability test as per DO 160 D Section 11 Category-F. 4. Humidity test as per DO 160 D Section 6 Category-C. 5. Fungus test as per DO 160 D ...
ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich CoresASTM C297 - Standard Test Method for Flatwise Tensile Strength of Sandwich ConstructionsIf you offer testing of aluminum honeycomb core, please provide a quote the three tests and for multiple honeycomb cell size.
ISO 17025 and WHO certificed laboratory needed for DIN Testing of automotive components 432h (high temperature relay) in accordance to DIN 75220, Ageing of automotive components in solar simulation units on 2-4 samples with dimensions 40*60*11 mm.
Oil laboratory needed hydrocarbon testing with it's interaction with various solvents an process streams including analysis of hydrocarbon solutions with elemental sulfur. Also, sulfur purity tests and the ability to work with pure elemental sulfur and its interaction with various solvents and process streams.
Clinical Research Laboratory needed for clinical study of oral care products including sensory testing and preference testing for the preference/ acceptance of oral care product (mouthwash), and to have it compared with competitor products.
Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded hot-plate apparatus. (We only have the similar test as per attachment.) · IEC 60383-2 (Equivalent to JIS C 3801-1:1999): Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and ins ...
LONG-TERM TESTING: Third-party consumer product laboratory needed for cooking oil filter performance testing. Requires food to be fried, oil filtered and multiple tests on the oil need to be performed including FFA, Peroxide, Anisidine and more on oil used in the consumer goods market. It would require food being fried twice per week, the oil filtered through filter and the oil tested for safety.
Laboratory needed for Fire rating testing to NFPA 701, NFPA 705, German fire code, Australian fire code, and UK fire code. Material is a nylon mesh material used in a performance environment that has been spray coated with a proprietary light diffuser and fire retardant
Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 standard fo Performance Requirements for Paint Systems Resistant to Chemical Agents and Decontaminants, for the Protection of Land Military Equipment and 65 coded Standard, described as Performance Requirements and Test Method for Paint Systems Resistant to Chemical Warfare Agents, for new new coatin ...
Analytical chemistry laboratory needed for reverse engineering and formulation of a product chemical solution: 1. What is in the solution (I know canola oil is in it but not sure what else) 2. Ratios of all the components so I can mix it myself 3. Currently the product is eco-friendly and made to biodegrade after 30 days, I want to make it last years while still being as environmentally friendly as possible (find an additive that will do this ...
Laboratory needed for DOT Testing to ISO Standards: (i) Viscosity test. The flow time in seconds is determined at 23 °C (73.4 °F) using the ISO standard cup with a 4 mm (0.16 inch) jet as set forth in ISO 2431 (IBR, see § 171.7 of this subchapter). Where the flow time exceeds 100 seconds, a further test is carried out using the ISO standard cup with a 6 mm (0.24 inch) jet. (ii) Solvent Separation Test. This test is carried out at 23 °C (73 °F) u ...
Optical absorption of crystal substrate using laser calorimetry.
Consumer Products Laboratory needed for clinical testing of Hair Towel to show that our product is better for hair than terry cloth and microfiber, does not cause breaks, frizz and flyaways. And need comparable testing using terry cloth and microfiber that shows they cause breaks, frizz and flyaways.
Veterinary medicine laboratory needed for performance testing of diagnostic monitoring device that measures heart function, respiration rate, and continuous blood pressure against blood pressure machines (arterial catheters, doppler methods, and tail cuffs) for accuracy of values. It will need to be tested on both standing horses and horses under general anesthesia. Approximately 20-30 horses will need to be used.
Geotechnical laboratory needed for physical properties of different slurries, solids and liquid: Color Solid Concentration (TSS+TDS) Heat of Formation Specific Gravity Specific Heat Capacity Viscosity Heat of Vaporization Thermal Conductivity Surface Tension Dielectric Contstant Solubility in Water Melting Point Boiling Point We are a biofuel company, we convert biomass to sugars and would like to evaluate physical properties for ...
Virology Laboratory needed for OPA (ortho-phthaladehyde) efficacy study on viruses Poliovirus type I, Rhinovirus type 42, Adenovirus type 2, Vaccinia (Wyeth), Coxsackievirus type B-3, Hepatitis A, Coronavirus, Cytomegalovirus, Influenza Virus (Hong Kong), Human Immunodeficiency Virus 1, Herpes Simplex-1, Herpes Simplex-2, Duck Hepatitis B, Avian Influenza A. . Could you please quote us on these tests, exposure time to the OPA(which we will ...
Environmental laboratory needed for sediment testing from drained covered reservoir for: sediment chemicals, nitrates,nitrites, NDMA, Chromium 6, mercury, lead, polonium, bismuth, radon decay products, PCB, DDT, chloroform residual in sediment, haloacetic acid residual in sediment Sediment samples in drained covered reservoir, to assess chemicals present
Materials Laboratory needed for ANSI Testing of Latex Coated Multipurpose Work Glove to be ANSI rated for Cut and Abrasion Resistance as demonstrated by an independent laboratory testing report (if certified to ANSI/ISEA-2016, Cut Level A2 and Abrasion Level 3). Thank you so much for your assistance in this matter.
Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cables on tensile performance, abrasion resistance, crush, impact, bending, kink, temperature cycling, water penetration, attenuation, PMD, chromatic dispersion, fire resistance, according to IEC Standard 60793-xx and 60794-xx. Following tests are required: IEC 60793-1-40 IEC 60793-1-48 IEC 60793-1- ...
Laboratory needed for ASTM Testing of aggregates used in oil pipeline operations to the following standards ASTM:Cement:ASTM C150 ? Standard specification for Portland cement Aggregates:ASTM ?294, ?295 - Standard Guide for Petrographic Examination of Aggregates for Concrete ASTM C33 - Standard Specification for Concrete Aggregates ASTM C637 -Standard Specification for Aggregates for Radiation-Shielding ConcreteWater:ASTM C1602 - Standard Specifi ...
Large company needs materials laboratory needed for accelerated aging study on thermoset material with for yellowing index and light transmitting to identify the relationship between the hours accelerated test and the years of outdoor exposure.Please, send me the costs for tests and measurements and samples dimensions.
Company developing new line of towels needs consumer products laboratory for laundering test study: AATCC 96 testing (Dimensional Stability to Commercial Laundry). to show they can withstand frequent high-temp commercial laundry conditions at our customers' large yoga studios. I need to reach below temperatures:wash = 170F (at least)dry = 190F (at least)
Materials Laboratory needed for Material characterization of metal with Polymer thinfilm - Mechanical properties characterization of flat thin steel (0.1 x 5 x 30mm) - Mechanical properties characterization of bent thin steel (0.1 x 5 x 30mm) down central axis - SEM imaging and cross sectioning of of metal+polymer thin film for thinfilm measurement
Laboratory needed for study on the compatibility of slotted HDPE pipe (for horizontal wells) through a groundwater contaminant plume over time and with variable temperature while injecting steam. The product is multi-phased, consisting of jet fuel, trichloroethylene and stoddard solvent.
Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on various polymers, including PP, PE, Nylon, TPU, and others. In particular, we are interested to learn the mechanical performance (Tensile Strength, Izod Impact, Young's Modulus), Gas Permeability, Colorant Properties, Coefficient of Friction reduction, creep properties, thermal conductivity, and elect ...
Preclinical laboratory needed for performing a number of in vitro studies using stromal vascular fraction (SVF) cells.These studies involve labeling of SVF cells with magnetic microparticles and superparamagnetic iron oxide nanoparticles (SPION). We want to measure the following parameters: 1-Assess cell viability, self -renewal capacity and proliferation capacity. of SVF cells exposed to SPION. 2-Confirm the intracellular uptake of SPI ...
Food laboratory needed for saffron testing to iso 3632-2 standard, Spices -- Saffron (Crocus sativus L.) -- Part 2: Test methods including for crocina (kleur) (fotometrisch met fotospectrometer van 80 tot 190 en meer) picrocrocin (smaak) safranal (geur) het gehalte aan niet-stampers (floral waste content) anorganisch materiaal (ash)
Distiller needs for vodka and spirits testing for all flavor and constituents including gluten of our spirits. As a distiller, I know that no gluten comes through the distillation process, but it would be nice to have the test results to show customers.
Biomechnical laboratory needed for sports performance testing of Cardio machine - 800 lb. including weight limit, calories burned, tensile strength of metal or wear and tear including which muscles of the body and which areas of fat the machine burns i.e. quads, calves, abs, legs, torso etc. Calories burned per half hour, etc.
Materials laboratory needed for surgical gowns testing - NFPA Standards - Standards for the use of Inhalation Anesthetics. - ASTM 1670, Standard Test Method for Resistance of Protective Clothing Materials to Synthetic Blood. - ASTM 1671 Test Method for Resistance of Protective Clothing Materials to Penetration by Bloodborne Pathogens Using Viral Penetration as a Test System. - ANSI/AAMI PB70:2012, Liquid Barrier Perfrmance and Classifi ...
Environmental toxicology laboratory needed for biodegradability and toxicity testing under GLP conditions: Fish acute toxicity test (OPPTS Test Guideline 850.1075) Aquatic invertebrate acute toxicity test (OPPTS Test Guideline 850.1010) Algal toxicity test (OCSPP Test Guideline 850.4500) Ready biodegradability test (OECD 301B)
LONG-TERM TESTING Equipment manufacturer needs laboratory for swabbing and residue testing to detect presence of pharmaceuticals, chemicals, antibiotics, and/or hormones on equipment surfaces. Looking for a reliable supplier for multiple testing requirements throughout the year.
Bioanalytical Laboratory needed for cell viability (MTT), cell proliferation studies (flow cytometry to characterize CD) and self-renewal studies including tagging of stromal vacular factor (SVF) cells using superparamagnetic iron oxides (SPION) and characterize the tagging using colorimetric assays such as Prussian blue staining. In addition,cell viability, studies (MTT), self-renewal studies (flow cytometry to characterize CD) and cell proli ...
LONG TERM TESTING Materials Laboratory needed for Polyamide Tube testing to prove compliance with DIN73378, DIN74324-1 and SAEJ844 Many different tests covering material mechanical properties, hydrostatic burst pressure, impact testing, moisture absorption, stiffness, cold temperature flexibility, chemical resistance, extractables, heat aging, thermal stability, artificial weathering and UV resistance.
Accredited laboratory needed for coconut oil testing for: VCO Saponification value (SV), Free Fatty Acid (FFA) value (Fatty Acid Methyl Esters (FAME) compositional analysis), Triacylglycerol (TAG) analysis (HPLC), Tocopherol analysis (HPLC), moisture content and range of brightness and yellowness Trace metals.
Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007 Test adhesive tensile strength at normal temperature and water immersion *Determination of tensile adhesion strength - C *Determination of open time * Determination of slip
LONG-TERM TESTING Geophysical Laboratory needed for Particle Analysis: Particle Size Distribution by Laser Diffraction of Quartz, Fly Ash, GGBS etc. We require the Specific Surface area of the sample too, calculated by PSD analysis along with different D values and 1, 2 and 3 Sigma values as applicable and distribution results.
Environmental Laboratory needed for mineral analysis in soil samples: X-ray analysis, particle size analysis was carried out on each sample to separate and prepare the clay fraction for the analyses. Samples were prepared for XRD Analysis using a back loading preparation method. 10 % internal standard (fluoride) was added and the sample micronized. The micronized material was analysed by XRD utilizing a Panalytical Empyrean Diffractogrameter wit ...
Medical Device Product Safety Laboratory needed for ISO biocompatiability testing of tattoo inks tested by ISO 10993-1 Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process, in order to import them to Brazil.
Independent laboratory needed for LED comparison study of 4 manufacturer's underwater LED light components to evaluate Quality of construction ? Quality of LED components ? Quality of LED Drivers ? Color Temperature output from each ? Lumens output from each- Underwater Lumens from each ? Projected beam angles from each ? Thermal temperature from each - Are the LED?s in spec with required approvals - I would also like the ...
To be analysed for polyisobuleneamine as per ASTM method for PIBA spcification for further information we will give you spcification for the same.
Materials laboratory needed for thermal conductivity testing of thermal paste used in computers, and we need to measure the actual thermal conductivity for the sale of goods. Currently developed several modifications to the calculated thermal grease thermal conductivity in the range of 0.7 - 6 W / (m * K).
Materials laboratory needed for DIN and ASTM Testing of thermal insulations foam board. Testing to To meet out the requirement of Density: DIN 53420(ASTM D 1622 Thermal conductivity :DIN 52612 OR 52616 Compressive strength :DIN 53421 (ASTM D 1621 Water vapour diffusion resistance factor: DIN 52615 Water vapour permeability : ASTM C355 Heat soaking : DIN 52328 Water absorption by submersion : DIN 53428 (28 days submersion) ASTM D 2842
Contract Research Organization needed for clinical research study: ELISA blood analysis for oxytocin on blood samples collected in hospital 3 times on 60 subjects.Analysis blood related to mood manipulation in voluntary participants (female). The sample is size 60 and the blood samples are collected in a hospital environment three times (180 samples). The oxytocin levels need to be measured with ELISA (Enzyme-linked Immunosorbent Assay Kit) kit. ...
Laboratory needed for transportation test for the new packaging box according to ASTM D4169-09 as per below: Please help to quote the test as below, Distribution Cycle 13, Assurance Level III. Test sequence as below: 1. Temperature and Humidity Conditioning 2. Schedule A: Handling 3. Schedule C: Vehicle Stacking 4. Schedule F: Loose-load vibration 5. Schedule I: Low Pressure 6. Schedule E: Vehicle Vibration 7. Schedule J: Concentrated Impact 8. S ...
Laboratory needed for Environmental Monitoring Testing for Class 8 Cleanrooms in a Non-sterile Pharma/Med Device Manufacturing Facility. Current testing Includes: Viable Air Counts, Surface Monitoring, Water testing, Personnel Testing (glove and wrist) Currently laboratory personnel collect, monitor, and analyze samples. Looking for a quote for an outside lab to perform this testing.
EPA GLP Environmental microbiology laboratory needed for OCSPP 885.1300 GLP CofA and 5 batch analysis for 5 microbial biopesticide active ingredients (TGAIs). 5-batch testing is for detection of formation of unintentional impurities (salmonella, e coli, shigella, etc.) according to EPA guidelines for registration of microbial pesticide products.
Large petroleum company needs materials laboratory for ASTM Testing of terephthalic acid to ASTM methods ASTM D8031-16 ? Acid number for TA by potentiometric titration ASTM D1209-05 ? Color of clear liquids (Pt- Cobalt Scale) Please provide - Cost/analysis - Turnaround - Sample amount required
Cosmetics Clinical Research Facility needed for UVB protectio study on human subjects: A sun protection factor (SPF) of 30 or higher. Validation of the SPF number by testing on 10 human subjects. UVA Protection: A critical wavelength of 370. Learn more about this test. Acceptable results for both phototoxic reactions and contact irritancy testing on 20 human subjects.
Environmental Microbiology Laboratory needed for algae MIC testing on blend of two biocidal compounds (both are fairly water insoluble powders). The MIC testing has to be conducted on two species of algae. Plenty of labs can run the tests on bacteria and fungi, but haven't been able to find a lab that can run the testing on algal species.
Electrical Laboratory needed for battery testing for charges of following test as per IS 1651, Stationary cells and batteries, lead-acid type (with tubular positive plates) Cell Details : 2V, 100Ah. 1. Test for capacity 2. Test for voltage during discharge. 3. Ampere hour and watt hour efficiency test. 4. Test for loss of capacity on storage. 5. Endurance test, 1500hr cycle testing. 6. Verification of constructional requirement. 7. V ...
Shipping company needs laboratory for hose bend testing of 6 hoses that need doing bending test according to EN1765 standard. Electrically discontinuous Hydrostatic tested, Vacuum tested. Oil Suction and Discharge Hose hose id:12 ID x 30' OAL working pressure Meets BS1435 EN1765,type S15 standard 150# RF Weld Neck Flange on end 1 and 150# lap Joint Floating Flange on end 2 assembly weight:1130 LBS
Biotech company needs Bioanalytical laboratory for cell culture experiment in bioreactor for pH, Glucose, lactic acid, glutamine etc. Blood/gas test on cell culture (BSL1) supernatant. Each experiment will include a daily sample for 8 days.
FDA compliant food laboratory needed for characterization of a natural extract (including microbiological analysis and analytical support) with the goal of filing a petition of new color additive with the FDA on 5 different batches of materials for total aerobic count, Salmonella, E. coli, yeast, and mold. We are also interested in analytical support for carbohydrates, proteins and lipids content of the same extract batches.
Environmental toxicology laboratory needed for toxicological studies (acute , chronic and ecotoxicity ) for 2 insecticides including Certificate of analysis for impurities analysis for the two product Please specify costs for each product and the time which will take
Medical Device Company needs medical technology laboratory for packaging/ product /development of developing a disposable medical cable assembly that will require sterilization. ABS plastic housing for connectors Silicone vs PVC for cable assembly I have questions about cost, materials, packaging and logistics.
Laboratory needed for study to determine the efficient method for determining amount of residual alcohol left over after sanitizing metal mixing equipment. The Equipment is sprayed with 70% Isopropanol and then wiped with rags. After waiting a set a amount of time, swabs are rubbed against the metal walls of the vessel to pull off any residual alcohol. We are trying to determine the best method for quantifying the amount captured by the swaps, ...
Analytical chemistry laboratory needed to analyze for Di-p-xylylene (CAS# 1633-22-3) in air samples to MSDS that indicates it's PEL is 5 mg/m3 for the respirable fraction. Please specify what sampling parameters and media should be used? And, how much would it cost to analyze to just one sample?
Laboratory needs confirmatory petfood testing on moisture content testing on pet supplement edible wafers that are contract manufactured . The U.S. based manufacturer runs tests and provides result on each batch. I am looking for a secondary source for testing.
Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the Hiding Power of Powder Coatings, ASTM D 3451, ASTM D 3451, Standard Guide for Testing Coating Powders and Powder Coatings
Laboratory needed for drug compound testing during stability study of Standard mouse chow. Chow was formulated using the compound to a final concentration of 750 mg of drug per kg of chow. In order to verify and establish formulation stability, we need the drug concentration in the pellets to be measured over the period of 6 months. We need an initial measurement to be taken (starting point) and then at least 2 more measurements; at the 3-month p ...
FDA GMP/GLP Pharmaceutical laboratory needed for stabiilty study, feasibility, method development and method validation of capillary IEF for quantitative testing of charge in pharmaceutical grade protein product (in buffer solution). Long-term sample testing, i.e. samples from stability studies.
Microbiology Laboratory needed for product development of Smokeless disinfectant pyrotechnic device that acts on fungi and bacteria broad-spectrum. through microbiological studies and trialsPreliminary analysis of this standard, following list of micro-organisms to be tested under specified temperature and humidity, the volume of a room of 30 m3 and 150 m3 considering the ratio of 1 g of pyrotechnic Smokeless mixed per m3 environment. Bacteria Ps ...
Environmental Microbiology Laboratory needed for efficacy study for the usage of choline dioxide gas in the deactivation of mycotoxins, specifically tricothecene, aflatoxin, ochratoxin, and gliotoxin. Additionally, what is the chemical make up of the fragments left after oxidation.
Scientific researcher would like bioanalytical laboratory for research study using measures of salivary cortisol and oxytocin. Need budget for purposed of preparing a grant proposal, and need urgent information regarding the costs implicated for the collection material, assays, and lab analyses work.
Pharmaceutical analytical chemistry laboratory needed for compendial USP Tests:sodium polystyrene sulfonate methods for sodium and potassium exchange as written in the USP Dextromethorphan HBR for Specific Rotation, USP/NF Isomalt for limit of nickel, USP/NF
Oil technology development company needs toxicology laboratory LC 50 and LD 50 testing with some controlled versions of HF acid. Essentially, the blends we want to test are compounds that control the acidity of HF and show an ambient pH value of as high as 4 or 5 in aqueous solutions. We are interested to know if your firm can help us carry out this kind of testing to effectively prove that our controlled versions of HF are inherently safer t ...
Analytical chemistry laboratory needed for Glassware Inhibitory residue test -on powdered hand wash laboratory glassware detergent. test needs to be performed according to the procedure described in ?Standard Methods for the Examination of Water and Wastewater, 18th Ed, Sec. 9020 ---- Glassware inhibitory residue test.?.
Food laboratory needed for irradiated pepper powder testing for volatiles compounds, capsaicinoids, carotenoids and sugars (carbohydrates) in irradiated pepper powder (sample size 192). Samples need to be stored at refrigeration temperature and ambient temperature (the method of extraction should be made available)).
ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 for the 120 Day Accelerated Water Treeing Test followed by test protocol to include Electrical Measurements, High Voltage Time Test, Physical Measurements, and Tree Count.
URGENT Research Scientist needs genetics laboratory for SNP studies, DNa isolation , PCR amplification and sequencing studies for FADS gene polymorphism in diabetes. 200 samples
UL, ETL, or NRTL recognized laboratory needed for certification testing of Domestic Storage Water Heaters (3 models) for export in US & Canada market to IEC 60335-2-21 standard. Models have difference is in the water tank capacity and rated wattage of the heating element. The water heaters are supplied at 220Vac, 60Hz supply, single phase, 2kW & 3kW.
Agri-food laboratory needed for blueberry testing ofFrozen Blueberries and Sweetened and Dried Blueberries for 1- Copper 2- SO2 (Sulfur Dioxide) 3- Benzoic Acid 4- Sorbic Acid 5- Talcum Powder 6- Brilliant Blue 7- Indigo Blue 8- TiO2 (Titanium Dioxide) 9- Saccharin Sodium Salt 10- Acesulfame Potassium 11- Sodium N-Cyclo ...
University research scientist needs UK laboratory for drug compound testing during stability testing of Standard mouse chow. Chow was formulated using the compound to a final concentration of 750 mg of drug per kg of chow. In order to verify and establish formulation stability, we need the drug concentration in the pellets to be measured over the period of 6 months. We need an initial measurement to be taken (starting point) and then at least 2 m ...
Environmental toxicology laboratory needed for toxicological studies (acute , chronic and ecotoxicity ) for 2 insecticides including Certificate of analysis for impurities analysis for the two product Please specify costs for each product and the time which will take
LONG-TERM TESTING Genetics Laboratory needed for DNA sequence replacement. We have our own BAC that we would like to make 6 sequence replacements in. All but one are less than 200 bp and one is 13kb. We can provide the DNA sequences necessary for recombination. Can you provide a quote on a per replacement basis as well as for a set of 6 sequence replacements simultaneously? (We plan to make one big initial set of changes and then will do sing ...
Accredited UK laboratory needed for construction building products testing of flexible sheets for waterproofing to BS EN 12691, Determination of resistance to impact BS EN 12730. Determination of resistance to static loading and EN 1847 for building products. Methods for exposure to liquid chemicals, including water
Industrial cleaning equipment company needs virology laboratory for Virucidal efficacy testing on Avian influenza virus (AIV),, H7N1Noroviruses, Adenovirus & Polivirus Have to test efficacy of electrolyzed water or Hypochlorous Acid solution (ph 6.5-7, ORP 800+, FAC 200 ppm) against various viruses and notice kill time and log reduction.
Food analytical chemistry laboratory needed for Beta d glucan contents of our mushroom product line. 5-7 products. We can send the samples. Interested only in the beta d glucan contents of each product. Each product has already been tested for mircos, tpc and heavy metals.
Biosafety Level BSL-2 Laboratory needed for conducting research on oncolytic viruses based on HSV1, Herpes Simplex Virus. We are looking for services for titrating how much HSV1 virus is present in our samples (e.g. plaque assays) and/or assays measuring cytopathic affect of virus in samples (CPE). We can provide cell lines for these assays if needed. If possible, we would also like to provide cancer cell lines to use for testing after titrati ...
Medical Device Microbiology Laboratory needed for disinfection and cleaning efficacy testing for needleless IV connector. to ASTM-E-1837 Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test) AND/OR ASTM-E-2314 Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test) needs to be pe ...
LONG-TERM TESTING: Haircare company needs Clinical Laboratory needed for clinical and microbiology testing of scalp samples and hair sample analysis 2. The characteristics of hair structure. 3. The state of your hair bulb. 4. The reproduction of your hair (normal or abnormal fall?) 5. The different phases of the hair cycle. 6. The causes of abnormal fall. 7. The excess sebum. 8. Potential oxidation. 9. The lack and excess of cholestero ...
Food Repackager needs microbiology laboratory for fruit, vegetable and environmental testing: : APC, Coliform and Ecoli - Food sample and environmental. Listeria species - environmental Listeria Mono - food sample. Right now I am just trying to get some pricing so a rough quote will be fine.
Very Experienced, FDA certified Preclinical Contract Research Organization needed for in vivo preclinical studies for 2 phase subset of FDA biocompatibility testing of eye implants in rabbits (eye implants intended to be used for cataract surgery in human). The program includes: - intramuscular or subcutaneous implantation test for 4 weeks - 6 test and 6 control rabbit eyes minimum 6 test months We would need the full set of services including pr ...
Food Laboratory needed for a product development project to develop and produce milk made from sesame seeds (developing and customizing formulation), with all the high quality control standards needed including requesting including labeling and regulatory guidelines set out by the Food and Drug Administration (FDA). Everything under a confidentiality agreement.
Georgia laboratory needed for organic waste stream testinf for relative volumes and BOD of the following organic constituents in a supplied sample of organic waste stream? Celluloses, Starches, Triglycerides, Free Fatty Acids, Volatile Fatty Acids, Saccharides, Proteins, Amino Acids.
Fuel system company needs laboratory experienced in aggressive fuel fuel system compatibiligy for chemical analysis of sour/contaminated gasoline to detect presence of the following: - POM plastic - stainless steel - flourocarbon elastomer - flourosilicon elastomer - 90copper-10Ni brass - copper conductor - conductor insulation (Electrisola I220) - filter mesh (we can give you a raw sample and/or maybe a more helpful description) An esti ...
Large chemical company needs biotechnology laboratory for Polymerase Chain Reaction (PCR) Testing for crop plants. Must be able to process single seed or leaf punch samples in high throughput (minimum 96 at a time). Experience with DNA extraction from rice. Require execution of legal agreement to enable seed companies to access testing. Lab must agree to routine proficiency testing and auditing.
Mechanical Laboratory needed for ISO mechanical testing to ISO 594 Testing of Conical Luer Fittings 1. Luer Assembly: Ensures that the Luer specimen can be assembled with minimum axial force and torque. 2. Separation Force: Ensures that the Luer specimen remains attached to the reference fitting when an axial load is applied. 3. Unscrewing Torque: Ensures that the specimen Luer remains attached under a specific unscrewing torque in the c ...
Electrical Laboratory needed for Diagnostic Medical X-Ray equipment testing: Insulation Resistance test before & after Humidity condition as per BIS norms (IS 7620-1986) we are giving below the details of the tests to be carried out. 1) Humidity Test (IS 302-1979) Humidity >= 95% at 35 to 45 Deg. centigrade for 48 Hrs followed by following test. 2) Insulation Resistance Test (IS 7620-1986,6.2.1) Apply 500 VDC for 1 Minute. Insulation Resistan ...
Oil Laboratory needed for gas testing to be done on the gas sample with operating pressure 80 ? 124 Kg/cm2g & Operating temperature 152 Deg C (Temperature will become ambient due to equalization with surroundings). . Please find the brief description about the Gas sample Brief Description about Gas Sample : The well fluid is directly coming from the wells mostly consists of Condensate, Gas & H2O at operating pressure of 124 kg/cm2g & operating ...
Pharmaceutical Laboratory needed for Real Time stability Study Testing. Storage for batches used in the real time stability studies (Chambers with 25deg C)
LONG-TERM TESTING Dairy needs USA Microbiology laboratory for Microbiological testing of cheese and butter and solids testing of concentrated whey. Nutritional tests. Environmental tests. Yeast & mold, coliform/e. coli, listeria, salmonella, staphylococcus, enterobacter, APC. Concentrated whey solids testing.
Consumer Products Laboratory needed for SPF Testing of sun tanning oil with SPF 15. Static SPF and the ISO 24443 (2010) UVAPF - AS/NZS 2604 (2012) Broad Spectrum Test. Please advise approximate testing times, cost breakdown, sample product volume for testing and any additional information you require from us.Sun tanning oil with SPF15, the active ingredients are Avobenzone, Octocrylene & Methoxycinnamate. We would also like to make sure we are c ...
Petroleum research & development laboratory needed for natural gas treatment research study. Our requirement is to check the efficiency of chemical for H2S Scavenging for crude natural gas. The natural gas stream contains H2S Concentration in crude natural gas is 150 PPM, The same needs to be treated by the chemical to achieve 0-5 PPM of H2S after treatment.
Preclinical Contract Research Organization needed for analysisof serum for two metabolites: Rodent serum sample analysis for ethanol concentration as well as nicotine/cotinine levels. Our current study requires analysis of approximately 450 samples for each of the two metabolites.
Construction Buildings Laboratory needed for ASTM Testing for Prefabricated Vertical Drains 1. Width ASTM D 3774 2. Thickness ASTM D 5199 3. Discharge Capacity qw , straight & folded ASTM D 4716 4. Tensile strength, elongation at break, elongation at 1kN (full width test) ASTM D 4595 5. Apparent Opening Size O95 ASTM D 4751 6. Permeability, permittivity ASTM D 4491 7. Grab tensile strength ASTM D 4632 8. Trapezoidal tear strength ASTM D 4 ...
Clinical Sports Performance laboratory needed for clinical biomechanical testing in humans to validate performance of university's sports biomechanics equipment Simi motion analysis system, Vertigo static and dynamic balance system, Bertec force platform, Myon EMG, IsoMed 2000-dynamometer.
Contract laboratory needed for clay analysis on clay mineral content by XRD ANalysis. For X-ray analysis, particle size analysis will be carried out on each sample to separate and prepare the clay fraction for the analyses. Samples will be prepared for XRD Analysis using a back loading preparation method. 10 % internal standard (fluoride) shall be added and the sample micronized. The micronized material will be analyzed by XRD utilizing a Panaly ...
LONG-TERM TESTING Analytical Chemistry Laboratory needed for Total Organic Carbon (TOC) testing. One bottle a week 3 samples a month and a report
Preclinical Contract Research Organization CRO needed for pharmaceutical tests to determine the permeability and absorption mechanisms of a drug using the CACO-2 cell line. Please let me know the cost and time-frame associated with this testing .
Asia Materials laboratory needed for ASTM Testing to ASTM F1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System and ASTM F903, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
Clinical Research Organization needed for clinical research study of 10 toothpastes in EU: cleaning effect effect of desensitization inflammatory effect deodorizing effect anticavities (anti tooth-decay) effect remineralizing effect hemostatic effect sensitizing and allergenic effect antimicrobial effect whiterning effect antioxidative effect effect of pH-normalized oral balance measuring the viscosity of saliva before and after use ...
Europe Materials Laboratory needed for Paint film performance tests on mild steel panels Sr No Test 1 Salt Spray Test (504 hours) 2 Humidity Resistance (504 hours) 3 Pencil hardness 4 Dry Adhesion 5 Elongation 6 Impact Resistance (direct) 7 Impact Resistance (indirect) 8 Colour Matching (Visual) 9 Colour Matching (Instrumental) 10 Metamerism Index 11 Gloss 12 Wet Adhesion 13 Chip resistance 14 Immersion Primer 15 Machinability 16 ...
Materials laboratory needed for ASTM Dielectric Testing: Dielectric Strength and Water Absorption (RT 24h) to ASTM D149, Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid. The material is 30% glass filled Peek. What test sample size and qty is needed? What is price and delivery?
Materials laboratory needed for ASTM Testing for compatiability of plasticizers to ASTM D3291 Testing (Standard Practice for Compatibility of Plasticizers...).Lab would need to accept samples of the plasticizer, and then formulate into the PVC, then perform the analysis.Approximately 10 samples.
Contract Laboratory needed for fatty acid methyl ester (FAME) analysis on approximately 72 marine plankton samples (on 47mm filters, in chloroform) and 72 copepod samples over 3 years (144 total).Would prefer a DB-23 column or similar to provide as much separation as possible in the C14-C22 range. Transesterification using sulfuric acid is preferred. For the copepod samples, TLC separation of FA esters and fatty alcohols may be necessary.
Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks (or 1,2,3..months) later ,some of panels occur delamination problem? (Some of Project; We saw after the installation,after the fabrication ..) (Peeling test should be minimum 18 kg/25 mm)
Textiles laboratory needed for ASTM Testing to test method ASTM D4970/D4970-2010 for pilling test for bed sheets? For our bed sheets we want them to last upto 50 cycles assuming people wash sheets once a week. (our product warranty is for 1 yr). what do you think will be the most accurate number of cycles to run for pilling to test a fabric that can last upto 50 washing cycles? Maybe 1000 cycles?
EnvironmentalLaboratory needed for OECD Testing of Sewage Treatment Water to OECD 303 for zinc phytate Simulation Test - Aerobic Sewage Treatment -- A: Activated Sludge Units; B: Biofilms (TSG requirement) This Test Guideline describes two simulations tests used in the aerobic sewage treatment. Simulation test (aerobic sewage treatment) - activated sludge units, ISO Standard 11733, OECD 303 A, EC C.10
LONG-TERM TESTING Manufacturer needs US Textiles laboratory needed for washing testing on a garment( Baseball cardigan) produced in Europe for US brand. Please specify costs for washing-test and how long do you need to issue report after you received our production-sample
Contract Research Organization needs bioanalytical laboratory for Ovine urine testing: 1. Assess Ovine urine samples for bacterial load 2. Assess Ovine urine for Heavy metal content (primarily silver). Number of samples are yet to be determined.
Lighting company needs optical laboratory needed for spectral transmittance measurement services. on quartz glass tubing 26mm I.D x 32mm O.D. (3mm wall thickness) and quartz glass plate (30mm width x30 mm length x2mm thickness) for measurement to verify the spectral transmittance. We are expecting the results to be similar to the pink line in the below graph so the equipment will need to be able to accurately measure in 200-400nm range. Pleas ...
Laboratory needed for development of companion animal lateral flow antibody and antigen diagnostic test products including Canine Heartworm, Lyme disease, Ehrlichia canis, Anaplasmosis and in the feline, FeLV and FI .Need USDA required testing for sensitivity, specificity and inter-laboratory validations with securing US source reagents (whole blood, plasma, and serum) In most cases the assays are detecting antibody. In a small number of cases ...
Analytical chemistry laboratory needed for quality and safety testing of moroccan oil
Laboratory needed for quantitative analysis of DEHP and DEHT. Must extract a resin from peristaltic pump tubes and then within that resin find the DEHP and DEHT levels in ppb. The resin is approximately 3% of the tubing composition and the DEHP and DEHT is approximately 1% each of that.
Pharmaceutical manufacturer needs FDA cGMP analytical chemistry laboratory for Compendial testing for active components in a cGMP regulated manufacturing environment. 1) Alcohol USP a. Appearance (Visual Observation) b. Acidity or Alkalinity (USP 39, p. 2361) c. Color of Solution (USP 39, p. 2361) d. Identification B (USP 39, p. 2361) 2) Chloroxylenol USP 39 a. Appearance (Visual Observation) b. Organic Impurities (USP 39, p. 3119) c. A ...
Agriculture laboratory needed for groundnuts kernels analysis: Testing for: Aldicarb, Azoxystrobin, Bentazone, Carberndazim, Clorothalonil, Clethodim, Diflubenzuron, Dimethenamid-P, Disulfoton, Dithiocarbamates, Fenamiphos, Fenbuconazole, Fluopyram, Flutriafol, Fluxapyroxad, Hydrogen Phosphide, Imidacloprid, Indoxacarb, Metalaxyl, Methoxyfenozide, Oxamyl, Pemethrin, Propargite, Prothioconazole, Pyrethrins, Quintozene, Tebuconazole, Trifloxystro ...
Microbiology laboratory needed for microbiological testing of production facility including water testing and air testing of various areas around production lineincluding plastic closures, preforms and conveyors.. Microbiology testing to include mold/yeast, total bacterial, and coliform separately. Tap water in the production area will also be tested in the production area. How do you go about and do these test. Does one of your technicans ...
Toxicology Laboratory needed for REACH OECD polymer testing to OECD TG 118 (1996) method on phenolic syntans, melamine, dicyandiamide, naphthalene, chrome syntan and tanning auxiliaries used for leather industry OECD TG 118 (1996) method is written on ECHA ?Guidance for polymers &monomers? booklet for GPC analysis. We are searching laboratory which have certification for OECD TG 118 test.
LONG-TERM TESTING Gemstone company needs geology laboratory needed for metallurgical and mineral analysis for gemstones, silica, gold, platinum, rare earth, etc. Initial testing for 6 samples. Please specify if there is reduced price for sending samples on a regular basis or if there is a reduced price for quantity?
Physical Laboratory needed for flammability pre-testing of carbon fibre samples to CS 25.853 Flammability Requirements for Aircraft Seat Cushions Appendix F, Part I, (a)(1)(ii) (i.e. 12sec vertical burn with 305mm x 70mm samples). The objective is to try 2 or 3 different materials to assist material selection and build up some confidence before testing at the lab required by our customer.
Automotive Laboratory needed for certification testing of car window module to General Motors and European standards FMVSS & CMVSS118 Europe - 74/60/ECE (III/5997/96 Rev1) Europe - 2000/4/ECE Europe - R21.01 Supplement 3 GMW3172 GMW15045 GMW15081 GMW15081 GMW15081 GMW3097/ 3100 (GM 9100P Series)
LONG-TERM TESTING Food laboratory needed for glycerin and 190 proof Grain Ethanol Testing for to verification of a suppliers Certificate of Analysis to following specifications: Organic Vegetable Glycerin Assay: greater than or equal to 99% glycerin by volume Specific Gravity: 1.248 @ 25 degrees Celcius Heavy Metals: Maximum 5 ppm (specifically Lead, Cadmium, Mercury and Arsenic) Water: Maximum 0.5% Diethylene Glycol: None Detected ...
Environmental toxicology laboratory needed for EPA TSCA Testing of nanoparticles to Toxic Substances Control Act (TSCA) Chemical Substance Inventory, for Silica particle containing cadmium nanoparticles for OCED Number 29 , Guidance Document on Transformation/Dissolution of Metals and Metal Compounds in Aqueous Media
University researcher needs microbiology laboratory for microbiology tests: a) Salmonella b) E. coli O157:H7 c) Listeria monocytogenes d) S. aureus e) Pseudomonas aeruginosa Plese specify.... a. cost of the above mentioned tests. b. how many samples are required (1, 2, etc.). c. type of food, it?s a ready-to-eat meat product. Thank you. Warm regards Rajender Singh Niagara College.
University Researcher needs materials laboratory for rheological testing of EPDM rubber compound which include viscosity vs shear rate ,dynamic modulus loss and storage moduli and tan delta. I need these data for material characterizing and extract material parameter required for rubber extrusion.
Accredited Food Laboratory needed for extractables and migration testing of Food grade (LLDPE Cling) film testing to U.S. FDA CFR 21 177.1520 clauses (c ) (2.1) Extractable fraction in n-hexanes Extractable fraction in xylene and FDA Migration on PE (Density; Melting point; n-hexane extractives or Xylene extractives) U.S. FDA CFR 21 177.1520 clauses (c ) (2.1) Cling plastic is intended for food wrapping application for contact with aqueous & ...
Nutritional supplement company needs analytical chemistry laboratory needed for comparison study on sugar levels of coconut water powder (sugar content) and find the equivalency
Consumer Products Laboratory needed for CLO values correlation of temperature performance for3 products. Correlation of wondering values with a temperature in which they are good until. i.e This material with a CLO value of .508 is good up until -20 degrees celcius.
Cosmetics laboratory needed for product safety testing of FDA cosmetic/drug_ skin care detoxification lotion with 25 ingredients. The ingredient scontain herbal extracts and essential oil that cause external skin firming and internal release of body toxins via the expel of urine and bile. Please contact me as soon as possible as I am looking to hand out samples to the public. I know that samples are not required to list ingredients; merely l ...
Materials Laboratory needed for biomechanical / biophysical testing for medical device burs: ¬Mechanical force of d¬evices test (compress¬ion, Torsion) Biomechanical property of dental burs is important for safety usage so test should assure torsional yield strength, torque, breaking point of dental burs moreover determine compression load force of device on rigid test block. Test apparatus should be arranged for axial force. 5.¬ ...
Medical Device Manufacturer needs medical device laboratory for sterilization validation of device sterilization process. 1.¬ ¬Sterilization method: ¬ We will supply instr¬uctions for a method ¬with step by step ins-tructions and we need¬ to get the steriliza¬tion validation ? the¬y will be autoclaved Yes it is correct but you should validate your steam sterilization parameters, temperature,duration,pressure etc. After you sterilize your ...
Bioanalytical Laboratory needed for protein characterisation studies using analysis techniques/toolsused in a protein formulation?to demonstrate the utility of our own characterisation tools in such. We will need to have samples run on some characterisation techniques such as, LC-MS, CD? Please provide a breakdown of what/which techniques are typically offered in a protein formulation study?
FDA Packaging Laboratory needed for FDA Packaging testing of coated paperboard according to the Microwave Heat Susceptor Packaging section of the 2007 FDA chemistry guidance http://www.fda.gov/Food/GuidanceRegulation/GuidanceDocumentsRegulatoryInformation/IngredientsAdditivesGRASPackaging/ucm081818.htm#aii11c
FDA GLP / GMP certified Bioanalytical Laboratory needed for Transfer of a HPLC-UV/DAD method for assay and purity of a small molecule in a complex matrix (lipid-based) to a GLP/GMP-certified lab. Transfer validation in the receiving lab and release analysis of product.
Materials laboratory needed for independent third party testing of laminate flooring for 1) Test for ortho phthalate plasticizers 2) Following tests with relevant ASTM test parameters (for vinyl flooring) - Stain and chemical test - Static load limit - Dimensional stability - ASTM 648 - fire test - ASTM 662 - smoke test 3) Following tests for EN / ISO parameters i) ISO 10581: Homogeneous Flooring including all the sub standards - ...
budding small business owner looking to start a clothing line needs consumer safety laboratory for children's safety testing for little girls aged 5-9 years. These dresses will be handcrafted dresses in India from organic cotton fabric. My queries are the following: 1.How can I make my product compliant for the children's safety certification in the US? 2.What is the precise and correct way for the garments to be labeled?
University researcher in Plant Protection needs agriculture laboratory for water testing of water samples used for agricultural irrigation. Please provide quotation for the respective analyzesand duration of the analysis as well as the procedures for submission of samples. Please, let me also know the following: 1. How can I send the samples from Mozambique to your laboratory, ; 2. How is that samples must be preserved; And other relevant procedu ...
FDA cGMP Pharmaceutical analytical chemistry laboratory needed for identity testing for the following drug and excipient materials that may be used in production of clinical grade biological drug products: Pluronic F-68 1X Phosphate Buffer Saline L-Glutamine Plasmids F-17 Serum Free Media CDM4HEK293 Media Sterile water WFI Clinical 293 Suspension Cell Bank Polyethylenimine (PEI) Max. MW 25,00010X Phosphate Buffer Saline 1M Tris, pH 9. ...
Aerospace company needs materials laboratory for investigation study of delamination problem with decor laminating application.by coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. We often see delamination or air bubbles popping in the interface between decor film and surface of honeycomb sandwich panel. We would like to know if there offgassing of film affecting the strength of adhesive causing ...
Electrical Home appliance manufacturer needs Microbiology Laboratory for antimicrobial efficacy testing of UV-light on sterilization. 1. Textiles inoculated bacteria is to be washed in our machine and bacteria reduction is analyzed on textiles. (UV program is to be activated) 2. Empty machine having test material that are inoculated by bacteria adhered to the surface of drum is to be tested and the test material is to be analyzed in terms of b ...
Analytical chemistry laboratory needed for testing Tocrisolve emulsion to two test methods. Homogeneous emulsion was analysed using dual scattering particles size analyser Nano DS (Cilas) after each cycle. Measurements were repeated 5 times. Number of samples : 7 ten day turnaround Acceptance Criteria: Mean droplet diameter: <250nm Please provide a quote with costs and how much sample you would need to test to these methods?
LONG-TERM TESTING Jordan company needs analytical chemistry laboratory for vitamins and herbs analysis is an essential requirement for registration. 1. Method of analysis for active ingredient (s) in finished products. 2. Impurities test. 3. Validation of method of analysis. 4. Stability at 30, 65% and 40C, 75%.
Polymer laboratory for PVC Testing. Test PVC powder its physical , chemical & identification test. 1) Identification of PVC 2) Viscosity, ml/g 3) No of impurity particle 4) Appearing Density, g/ml 5) Residual chlore thylene content ug/g I am providing details of test to be perform for PVC resin powder.
Microbiology laboratory needed for establishing a slf-sustaining microbiome including establish a ratio of microorganisms to populate a small (5cu/mm) biome that can sustain life for as long as possible. Ideally the biome can tolerate temperatures as low as 10c and as high as 40c. We have fine control over the amount and wavelengths of light that enter the biome.
US FDA GMP / GLP Pharmaceutical VIrology Laboratory needed for GMP PCV (porcine circovirus) testing of 1, up to 10 samples. a) cost per 1 sample, and cost per sample if I provide you with 10 samples? b) turn around time? c) my sample delivered to where?
Larg Construction Building Materials company needs certification laboratory for ANSI Testing of tile adhesives & grout accoding to ANSI standards. FK10W Cementitious tile adhesive C1T EN 12004 GM1 Cementitious tile adhesive C2T EN 12004 FLS1000 Cementitious tile adhesive C2TES1 EN 12004 DB2000 Cementitious tile adhesive C2TE EN 12004 COLORFILL Cementitious joint grout CG2 EN 13888 Please provide pricing for quots.