Incoming Roofing Laboratory Test Requests

Contract Laboratory has received the following Roofing Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Roofing Laboratories to perform their Roofing Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Roofing laboratory that would like more information on these Roofing projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Roofing laboratory test requests. Please log in to see more.

17-01070

Roofing

Materials laboratory needed for testing waterproofing membrane for
1 - hydrostatic head resistance (an independent test) required values: 70m (231ft),
2 - wet/dry cycling (an independent test) required values: no effect @ 25 cycles at 231ft, and
3 - adhesion to concrete (an independent test)
4 - technical properties testing per ASTM standards including mass per unit area, peel adhesion to concrete, hydrostatic pressure resistance, permeability, grab tensile strength, puncture resistance, low temperature flexibility, and water vapor transmission rate.

Submit Response

17-00789

Roofing

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus test) .

Closed

17-00599

Roofing

LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeric liquid coating used for roofing on commercial building. Polymer coating that instead of coating and drying within two hours discharged into storm drain causing notification of Fire department and Hazardous Materials units.

Closed

17-00254

Roofing

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

Closed

16-02472

Roofing

Mechanical/material laboratory needed for testing the durability and leak proofing of valves on perfume bottles.

Closed

16-01655

Roofing

Accredited UK laboratory needed for construction building products testing of flexible sheets for waterproofing to BS EN 12691, Determination of resistance to impact
BS EN 12730. Determination of resistance to static loading and
EN 1847
for building products. Methods for exposure to liquid chemicals, including water

Closed

16-00955

Roofing

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids. o increase our export possibilities we have chosen the 4 following adhesives and joint grout products for testing under the ANSI standards (Standard and optional performance characteristic). ? tile and marble adhesive, tile and marble adhesive, tile and marble adhesive, Colorfill, Joint grout, 2-8 mm, for tiles and slabs, ceramic or natural stone. Please inform us about the cost, payment terms and all the details and the accompanying documents that are necessary to send the test samples such as packaging, quantity of the sample, testing time

Submit Response

16-00904

Roofing

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids. o increase our export possibilities we have chosen the 4 following products for testing under the ANSI standards (Standard and optional performance characteristic). ? FLS 1000, tile and marble adhesive, C2TE S1 ? GM 1, tile and marble adhesive, C2T ? FK 10W, tile and marble adhesive, C1T ? Colorfill, Joint grout, 2-8 mm, for tiles and slabs, ceramic or natural stone, CG2 Please inform us about the cost, payment terms and all the details and the accompanying documents that are necessary to send the test samples such as packaging, quantity of the sample, testing time

Closed

15-02060

Roofing

Materials laboratory needed for ASTM testing of roof coating to ASTM D 6083Standard Specification for Liquid Applied Acrylic Coating Used in Roofing or to ASTM C 1549 or ASTM E 1918

Closed

15-00660

Roofing

California construction materials laboratory needed for ASTM waterproofing testing of liquid applied to foundations for
- functionality
- thickness
- de-lamination/ adhesion
- bubbling

Closed

15-00229

Roofing

Physical Laboratory needed for coatings testing of Bituminous waterproofing membrane for concrete bridge decks.
Number of sample: 1 type
We need laboratory tests according to standards:
? EN 13596
? EN 13653
? EN 14691
? EN 14692
? EN 14696
? EN 14694

Closed

15-00148

Roofing

Waterproofing company needs physical laboratory for weathering testing: insulation properties test for concrete in minus 30 degree

Closed

14-01080

Roofing

Asia materials laboratory needed for solar reflectance testing of manufactured a product which is used for Weather Proofing.

Closed

14-00620

Roofing

India materials laboratory needed for coating testing of coated fabric for Waterproofing properties
Puncture Resistance CBR EN ISO 12236
Height of fall without perforation DIN 16726
Root Resistance EN 416
Oxidation Resistance EN 575


Closed

14-00572

Roofing

Middle East environmental / mechanical laboratory needed for ASTM Testing of Waterproofing Membranes to several ASTM Standards: ASTM D638, ASTM D1004,ASTM D1000,ASTM E154,ASTMD570 ASTMD543, and ASTME96

Closed

14-00349

Roofing

computer Manufacturer needs Plastics Resin Testing of computer keyboard's one plastic part: it is manufactured from ABS resin, but we need proofing that it does not has included Polyvinyl Cloride (PVC)?

Closed

13-01217

Roofing

Manufacturer of UPVC roofing sheets needs materials laboratory for ASTM Testing to ASTM D4434/D4434M-11 ?Standard Specification for Poly(Vinyl Chloride) Sheet Roofing ? - ASTM D6878/D6878M-11a ?Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing? - CAN/ULC-s107-10 ?Standard Methods of Fire Tests of Roof Coverings? - A123.21-10 ? ?Standard test method for the dynamic wind uplift resistance of membrane-roofing systems? - ANSI/UL 790, "Standard Test Methods for Fire Tests of Roof Coverings" (ASTM E108 and ANSI/NFPA 256). - UL 2218, "Impact Resistance of Prepared Roof-covering Materials." Kindly inform us if you can perform the above mention test. and please quote us. regards dharmik shah export manager
email: phonenumber:

Closed

13-00479

Roofing

India Plastics Laboratory needed for Testing as per IS 12866:1989 for light diffusion of Fibreglass Reinforced Polymer Roofing Sheet

Closed

13-00290

Roofing

Europe physical laboratory needed for ASTM Testing: Hydrostatic pressure testing test for waterproofing material as per ASTM D5385

Closed

13-00091

Roofing

India materials laboratory needed for water proofing testing totest water resistivity of Water proofing membrance at specified pressure at different movement(radial movement & tangential movement)

Closed

12-0933

Roofing

Materials Laboratory needed or DIN Testing: (DIN Standards) for Synthetic PVC water proofing membrane, are available at your lab or not. Please confirm me as early as possible or advice, so that we can proceed further. Very Urgent. 1. DIN 53363: Tear Resistance 2. DIN 16726: Puncture resistance & Hydro Static Pressure Resistance. 3. DIN 4062: Root Resistance.

Closed

12-0874

Roofing

India Materials Laboratory needed ASTM Testing to ASTM C1363/ASTM C518: Hot Box testing to calculate U-Value as per ASTM C1363/ASTM C518. This is to enquire and confirm the necessary details to carry out U-value test for our roofing system.

Please be informed that our standing seam is comprised of Liner profiles, Vapor Control layer, Clips, Mineral wool insulation and Kalzip profile.

Please let us know the required size of the sample for testing and please quote the cost for the test.

Closed

12-0530

Roofing

Large Construction Company needs Saskatchewan Materials Laboratory for ASTM Testing Site inspection of cementitous fireproofing testing to ASTM E605 and ASTM E736

Closed

11-2701

Roofing

Physical Laboratory needed for ASTM testing to ASTM E 408 of aluminium foil and metalized polyethelene(MPET) to ASTM E 408. Aluminum Foil isfor elaminated aluminium foil radiant barrier. Our product is to be used by construction industry intended for roofing insulation.

Closed

11-01374

Roofing

India plastics laboratory needed for vapour proofing( permeability) property testing of Non wovwn Polymer cloth in India.

Closed

11-00565

Roofing

Eastern USA Non-Destructive Metallurgical Laboratory needed to test a piece (1/2" by 1/2" triangle shape) of corrugated metal roofing material taken out from one of the roofs at West Point, NY to identify the type of materials. The description in Building Information Database indicates as "Hand-Hammered Tin Metal roof" and it was built in 1816. The purpose of testing is to determine metal characteristics such as tin, stainless steel, steel, or tin/lead.

Closed

11-00416

Roofing

USA Materials Laboratory needed for testing concrete material for water permeability, compressive strength, freezing & thawing, etc. as per CRD C48-73 - Making a concrete with our product for waterproofing concrete.

Closed

10-01819

Roofing

Toronto, ON ASTM Materials Laboratory needed to assist with testing of construction waterproofing materials in accordance to ASTM C1305, C1246, C957 and other standards.

Closed

10-01581

Roofing

UK ASTM MATERIALS LABORATORY NEEDED FOR ROOFTEX POLYURETHANE WATERPROOFING MEMBRANE TESTING IN ACCORDANCE TO ASTM.

Closed

10-01319

Roofing

Materials Laboratory needed for ASTM Polyurethane waterproofing membrane testing in accordance to ASTM.

Closed

09-2103

Roofing

India ASTM E1980 Building Materials Laboratory needed for SRI value for the chemicals coating on the terrace of building with waterproofing and insulation properties and white in color

Closed

09-0281

Roofing

AFRICA MATERIALS LABORATORY NEEDED TO TEST CONSTRUCTION MATERIALS(WOODEN, GYPSIUM, WATER PROOFING AND TEXTILE MATERIALS TO BE USED FOR A HOTEL CONSTRUCTION AND FINISHING.

Closed

08-2377

Roofing

India Physical Testing Laboratory needed for
Materials Screeds Testing: Compressive strength, Residual Humidity,
Waterproofing: Elasticity, Adhesion to substrate
Adhesives: Shear Strength, Tensile Strength, Adhesion / bond & compatibility with above mentioned stones
Grouts: Compressive strength, Resistance to abrasion, Water absorption, De-colorization, Stain
Sealents: De-colorization, Stain tests, Shore hardness, elasticity, ultimate elongation

Closed

08-1461

Roofing

ISO West Africa materials laboratory needed for ASTM Testing for tensile strength,relative density,specific gravity,thermal resistance,colour and corrossion resistance tests [properties] of longspan aluminum roofing materils.

Closed

08-1303

Roofing

Textiles Laboratory needed for AATCC testing of applied spin finish and water-proofing finish levels (weight %) using standard soxhlet extraction technique.

Closed

08-0695

Roofing

Large COnsumer Products Company needs materials lab in India for analysis of asbestos in the cement tiles used for the roofing purpose.

Closed

07-2328

Roofing

Materials laboratory needed to test PVC sheet vinyl roofing membrane

Closed

07-0076

Roofing

Physical laboratory needed for testing the content & water proofing level of 100% nylon water proof fabric

Closed

05-0626

Roofing

Ignitability / Flashpoint / Firepoint on solid material (roofing material)

Closed

Submit Roofing Testing Requests for Roofing testing and Roofing Scientific Research