Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Coatings Laboratories to perform their Coatings Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Coatings laboratory that would like more information on these Coatings projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 Permeability Coatings and Films Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7 2. Liquid water permeability: Test method EN-1062-7 3. Acid Resistance . 4)SRI
Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7 2. Liquid water permeability: Test method EN-1062-7 3. Acid Resistance . 4. SRI (solar reflective index) ASTM C 1549-04 5. Chloride Ion penetration ASTM C 1202 -97 6. Water Absorption ASTM D 870 All above tests for water based paint
Environmental Simulation Laboratory needed for paint plastic cans testing for 28 days at stacked conditions to simulate summer test simulation at day time 45 to 48 degree c, night time 29 to 35 degree c ? What tests are we going to perform on cans (summer test simulation) The test mentioned below should be carried out. o Leak o Drop o Roll o Transportation o Deflection o Opening and closing of Lid ? Tinting and shaking
Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, Ghost, Halo (ISO 9358-1994), Lateral Chromatic Aberration, Longitudinal Chromatic Aberration and Reflection Ratio. Vibration and mechanical shock testing plus abrasion and high pressure water spray testing.
Laboratory needed for Fire rating testing to NFPA 701, NFPA 705, German fire code, Australian fire code, and UK fire code. Material is a nylon mesh material used in a performance environment that has been spray coated with a proprietary light diffuser and fire retardant
Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 standard fo Performance Requirements for Paint Systems Resistant to Chemical Agents and Decontaminants, for the Protection of Land Military Equipment and 65 coded Standard, described as Performance Requirements and Test Method for Paint Systems Resistant to Chemical Warfare Agents, for new new coating project to:
Screening Test (Resistance to Tri-n-Butyl Phosphate) onAluminium Alloys: 2024-T3 unclad, 5083 and 7020-T8
Optical Characteristics: *Visual comparison of the colour of the paints *Specular Gloss *Colorimetry on Aluminium Alloy 5083 or 7020-T6 and Steel
Scratch Hardness on Aluminium Alloy 5083 or 7020-T6 and Steel
Flexibility (Cupping test) on Aluminium Alloy 5083 or 70
Laboratory needed for DOT Testing to ISO Standards: (i) Viscosity test. The flow time in seconds is determined at 23 °C (73.4 °F) using the ISO standard cup with a 4 mm (0.16 inch) jet as set forth in ISO 2431 (IBR, see § 171.7 of this subchapter). Where the flow time exceeds 100 seconds, a further test is carried out using the ISO standard cup with a 6 mm (0.24 inch) jet. (ii) Solvent Separation Test. This test is carried out at 23 °C (73 °F) using a 100.0 mL(3 ounces) measuring cylinder of the stoppered type of approximately 25.0 cm (9.8 inches) total height and of a uniform internal diameter of approximately 30 mm (1.2 inches) over the calibrated section. The sample should be stirred to obtain a uniform consistency, and poured in up to the 100 mL (3 ounces) mark. The stopper should be inserted and the cylinder left standing undisturbe
Materials Laboratory needed for Material characterization of metal with Polymer thinfilm - Mechanical properties characterization of flat thin steel (0.1 x 5 x 30mm) - Mechanical properties characterization of bent thin steel (0.1 x 5 x 30mm) down central axis - SEM imaging and cross sectioning of of metal+polymer thin film for thinfilm measurement
Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on various polymers, including PP, PE, Nylon, TPU, and others. In particular, we are interested to learn the mechanical performance (Tensile Strength, Izod Impact, Young's Modulus), Gas Permeability, Colorant Properties, Coefficient of Friction reduction, creep properties, thermal conductivity, and electrical conductivity polymer samples: Tensile Strength, Young's Modulus, Gas Permeability, Thermal Conductivity, Electrical Conductivity, Impact Strength, Creep, UV Irradiation, Colorant, Melt Flow Index, Nucleation
Environmental Microbiology Laboratory needed for algae MIC testing on blend of two biocidal compounds (both are fairly water insoluble powders). The MIC testing has to be conducted on two species of algae. Plenty of labs can run the tests on bacteria and fungi, but haven't been able to find a lab that can run the testing on algal species.
Europe Materials Laboratory needed for Paint film performance tests on mild steel panels Sr No Test 1 Salt Spray Test (504 hours) 2 Humidity Resistance (504 hours) 3 Pencil hardness 4 Dry Adhesion 5 Elongation 6 Impact Resistance (direct) 7 Impact Resistance (indirect) 8 Colour Matching (Visual) 9 Colour Matching (Instrumental) 10 Metamerism Index 11 Gloss 12 Wet Adhesion 13 Chip resistance 14 Immersion Primer 15 Machinability 16 Superior weathering for gloss and colour retention
FDA Packaging Laboratory needed for FDA Packaging testing of coated paperboard according to the Microwave Heat Susceptor Packaging section of the 2007 FDA chemistry guidance http://www.fda.gov/Food/GuidanceRegulation/GuidanceDocumentsRegulatoryInformation/IngredientsAdditivesGRASPackaging/ucm081818.htm#aii11c
OECD GLP Environmental Toxicology Laboratory needed for Toxicology Testing Acute Oral Toxicity, AMES Test, Skin Corrosion, Skin Sensitization, In Vitro Mammalian Chromosomal Aberration Test (if AMES shows positive), In Vivo Mammalian Gene Mutation Test (if AMES shows positive); Eco-toxicological tests: Acute Fish Toxicity, Ready Biodegradability, Acute Daphnia Toxicity.and and Physicochemical tests: Physical Status, Water Solubility, Melting/Freezing Point, Boiling Point, Vapor Pressure, Octanol/Water Partition Coefficient, Density, Particle Size Distribution;
LEGAL Materials laboratory needed for measuring surface of a flexible thin film material to characterize a few topographical features such as surface roughness Ra.
Contact mode AFM testing in ambient; non-contact optical interferometric profilometer such as Wyko profilometer.
Capable to scan 200x200 um area of sample, with resolution down to 0.5 nm roughness for smoothest materials.
Polymer Materials laboratory needed to conduct isothermal viscosity testing of sealants and estimate working life at various temperatures. I know this cannot done by regular Brookefield viscometers. At 75 F for 2 hours at 85 F for 2 hours 100 F for two hours 120 F for 2 hours 135 F for 2 hours 150 F for 2 hours.
LONG-TERM TESTING Asia Cosmetics Microbiology Laboratory needed for providing an annual quote for microbiological analysis in water and cosmetic grade pigment powder every 3 months.
1) Bioburden % 2) Microbiological safety Index. 3) Detection of Pseudomonas aeruginosa 4) Detection of S.aureus 5) Gram Negative bacteria 6) Yeast & Mould count in Titanium Dioxide pigment sample and
1) Total plate count 2) Detection of E.coli in water sample
Metal FInishing company needs toxicology laboratory for toxicity studies of liquid products for Eye irritation, Skin irritation, Acute oral toxicity, Acute dermal toxicity, and Inhalation toxicity. One product was tested many years ago, we would like to have updated results and a comparison to a newer product. Original results found lower limits for LD50 values, the only result which was eye irritation.
Materials laboratory needed for physical testing of machine part that has Sulphuric Anodization on Aluminium that require following testing.
a. Insulation of the oxide coating (Disruptive voltage test) b. Sealing quality ? to measure loss of the absorptivity of the anodic oxide coating c. Continuity of oxide coating d. Light resistance test
Certified Materials Laboratory needed for coating testing of Three (3) mixed adhesive coating samples tested for the following: 1. Volatile Organic Compounds (VOC) content per ASTM D-3960, Section 8.2.4. (Determining Volatile Organic Content of Paints & Related Coatings) and/or SCAQMD Annex to ASTM D-3960) 2. Weight Fraction of non-volatiles (solids) per ASTM D-2369-81 (Volatile Content of Coatings). 3. Density of coating per ASTM D-1475 (Density of Paint, Varnishes, Lacquer, and Related Products).
Materials Laboratory needed for Formulation and testing of flame retardant epoxy and unsaturated polyester compositions using customer supplied additives.
Physical Laboratory needed for salt spray testing on powder coating surface of( MS sheet )
Analytical chemistry laboratory needed to strip xylene and mineral spirits from functional fluoropolymer resins for coatings, then process the resulting solids into flakes for testing by our customers.
North America Materials Laboratory needed for Migration test of Bisphenol A BPA and other possible constituents under 21 CFR 175.300 (d) table 1
Materials laboratory needed that is capable of running Alberta Transportation Specification B388 tests for type 3 concrete sealers
I need to evaluate several different samples of Hot Melt Polyester Adhesive (in dry pellet form). I want to know the moisture content of each sample at room temperature and the viscosity at 235 C (455 F). Number of samples is 5.
Contract Lab needed for UL 1332 Moist Carbon Dioxide Sulfur Dioxide Air Test on 14 coated panels (1200 Hours)
Large coating company needs laboratory for coating testing: 8 Moist Carbon Dioxide-Sulfur Dioxide-Air Test per UL1332. 8.1 See 8.1 - 8.4 UL 1332 for details: UL rqmts 1200hrs Allenton Pnls: 2 scribed and 2 unscribed 8-Stg Pre-treatment CRCQ 4 X 9 specimens 2 scribed and 2 unscribed 8-Stg Pre-treatment HRPO 4 X 9 specimens Total (4) scribed and (4) unscribed (8) total 4X9 specimens MSM Pnls: 2 scribed and 2 unscribed Batch Pre-treatment CRCQ 4 X 9 specimens 2 scribed and 2 unscribed Batch Pre-treatment HRPO 4 X 9 specimens Total (4) scribed and (4) unscribed (8) total 4X9 specimens
Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 Samples are water based polyurethane resins.
Materials Laboratory needed for ASTM Testing of paint and coating to ASTM D7855, Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
India materials laboratory needed for coatings testing: 1. Polyester Fabric PU Coating Test. 2. Polyester Fabric PVC Coating Test.
FDA polymer materials laboratory needed for FDA compliance testing for resinous and polymeric coatings FDA Title 21 Section 175.300. Under (a) - (2) Coatings cured by polymerization, condensation, and/or cross-linking without oxidation.
Laboratory needed for Whole Rock Analysis of a local material for formulation of the composition into glaze software to develop glazes. I also want to know if this local material contains lead or cadmium.
Contract Laboratory needed for ISO testing as per ISO 17652 Part 3, Welding Test for shop primers in relation to welding and allied processes Part 2: Welding properties of shop primers
Microbiology Laboratory needed for Accelerated testing of microbial growth resistance of exterior paint films (water-based)
Air purification company needs advanced materials laboratory for deformulation or analysis of nanotechnology coating die release agent used in air purification
India materials laboratory needed for paint testing for anti carbonation properties as per EU 1054 / 1066. Pl adv if you have any accredited labs in India for this.
Canada materials laboratory needed for light transmissions testing of window film that claims to block out 99% of UV rays and am interested in a light transmittance test from the 280nm-400nm range (UVB + UVA).
Materials laboratory need for ANSI Testing of window films: test Window film Ansi lab test and strength test
Materials Laboratory needed for exterior latex paint testing: water analysis of latex exterior paint diluted with water prior to application. Sample is dried paint on plywood. Water analysis.
Mechanical Laboratory needed to perform NADCAP Testing to NADCAP (AC71001): endurance (wear) life and load-carrying capacity of solid film lubricants (Falex Pin and Vee Method), per ASTM D2625.
Midwest or Eastern United States Materials Laboratory needed for Abrasion testing of hard chrome plating and HVOF tungsten carbide coating using ASTM G195 and ASTM F1978
Materials laboratory needed for SEM Imaging / EDX Analysis the surface of a few parts. Parts are non-conductive and will most likely need a metallic coating. Feature sizes of ~50-100nm will need to be resolved. EDX analysis of the surface is also needed.
Physical materials laboratory needed for hydraulic & gas blistering testing on friction reduction coating to API RP 5L2 and ISO 15741 in a pressure chamber and measurement of physical effects on friction reduction coating
Physical Laboratory needed for coatings testing of Bituminous waterproofing membrane for concrete bridge decks. Number of sample: 1 type We need laboratory tests according to standards: ? EN 13596 ? EN 13653 ? EN 14691 ? EN 14692 ? EN 14696 ? EN 14694
Large chemical company needs materials laboratory capable of performing BS EN 1062-6 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability
Industrial Consumable manufacturer needs mechanical laboratory for ASME Testing: Residue analysis of Developer, Remover and Penetrant and we want to test them.
Physical Chemistry Laboratory needed for ASME Testing: Residue analysis Magnetic particle testing 1). 14AM 2). White paint Penetrant particle testing 1). Developer 2). Remover 3). Penetrant
They are aerosol type and contained in can
India physical laboratory needed for coating testing: Solar reflective Index measurement of anti-corrosive coating
Color Pigment Manufacturer needs Asia analytical chemistry laboratory for WDXRF, Wavelength Dispersive, Xray Fluorescent Analysis WDXRF services for samples our new range of pigments.
East Coast USA test lab neede for HPLC confirmatory testing to confirm that direct thermal paper suppliers who claim to use phenol-free color developers in their direct thermal coatings do not use phenolic-developers, such as Bisphenol A. Need a lab to test the total phenol content of papers known to contain phenolic-developers in the coating and those that do not. I assume this would be determinable by HPLC.
India materials laboratory needed for paint testing to BS 476, Fire tests on building materials and structures. Guide to the principles, selection, role and application of fire testing and their outputs
Europe materials laboratory needed for coating testing, Anti-corrosion testing of pipeline coatings anticorrosion test
Europe or Middle East Laboratory needed for materials testing : Coating testing to EN10290 for Qualification of polymer pipe coatings
Large Paint COmpany needs toxicology laboratory for toxicology study testing: BG1 LUC estrogen transcriptional assay (OECD TG 455) one test sample, a bisphenol, can be shippined at Room Temperature
Ontario Canada A2LA or ILAC Materials Laboratory needed for ASTM Testing: Material testing of automotive fasteners. Hardness testing rockwell c and others. Thread verification, plating thickness, chemical composition of metals and coatings. Salt spray testing. Tensile and shear. Optical comparator for dimensional. Gauge calibration and Gauge R&R.
Pakistan materials laboratory needed for BS Testing: Fire Proof testing of paint to BS STandard BS476, Method of Determination of the fire resistance of non-load bearing elements of construction Fire Proof Paint
India materials laboratory needed for coating testing of coated fabric for Waterproofing properties Puncture Resistance CBR EN ISO 12236 Height of fall without perforation DIN 16726 Root Resistance EN 416 Oxidation Resistance EN 575
Food Laboratory needed for food contact surface testing of Food Grade Coating for direct contact with food to EN1186EU 1935/2004FDA 175.300FDA 175.105DAFF level 2
Materials Laboratory needed for coating testing of acrylic coating for Anticarbonation test as per DIN 53122, Determination of the water vapour transmission rate of plastic film, rubber sheeting, paper, board and other sheet materials by gravimetry (
India GLP microbiology laboratory needed for GLP / DIN EN Testing of paints. Paints with biocides needed to be evaluated for microbiological performance/efficacy tests of antifouling agents in Paints in India?"
India analytical chemistry laboratory needed for formula ingredient testing of liquid matrix resin .
Analytical chemistry laboratory needed for paint testing of anti-fouling paint. The pain needs to be tested to determine if TBT (tributyltin) is present.
Protective Product Manufacturer needs analytical chemistry laboratory for formulation development studies. At the moment we are focused on working out a formula for a protective coating. The product based on which we want to create our own one has already been analyzed for us with the use of NMR, TGA and GC-MS methods. Unfortunately, in spite of many tests and trials we haven?t been able to achieve a satisfactory result. (the final product doesn?t cure) Thus our request. Are you interested in conducting the tests for us and work out a formula for a ready to use product? The product consists of one component and is based on silicones. We have samples of all the substances needed in this formula. If necessary we can ship them to you. We can also conduct the tests ourselves following your advice. If yes, what is the approximate time and cos
Physical Chemistry Laboratory needed for OECD Biodegradability Testing for finely micronized insoluble in water wax polymers using either OECD 301B, 301E or 301F. I am not sure which test would best fit our needs to determine "ultimately biodegradable". The product will be going into facial scrubs so their end life will be in a drain. Please let me know which test you recommend and also how long it will take to complete each test along with prices. Thank you so much!
Accredited Analytical Laboratory neede for VOC testing:CARB 310 VOC determinations in USA or Canada
Weathering Laboratory needed for performance testing / weathering testing of exterior coating, based on Ordinary Portland Cement, polymers, fillers, and additives. We would like to know how it performs under outdoor exposure. Please let us know how you can help us to get accelerated weathering test report and what may be the charges?
Colorant Manufacturer for coatings industry is interested in having coating approved for FDA food contact requirements and requires toxicological laboratory to perform toxicological tests for FDA food approval
ISO certified laboratory to certify thermal properties of liquid thermal insulation coating. Thickness of coating is 1-6 mm, so it could be tested indirectly by comparison of coated and uncoated samples. Using difference in sample's thermal conductivness it is possible to calculate value of coating itself
Canada Materials Laboratory needed for Materials Testing: Coating testing of 2 different coatings at 3 different moments in time with either GPC/SEC/GFC Light Scattering Coupling GPC/SEC/GFC Viscometry Coupling. I would like information on the dispersity of the samples.
NABL India Laboratory needed for paint testing to conduct inter lab comparison for Paint testing for nabl requirement
India Materials Laboratory needed for coating research development for development of Chromium nitride alloy with Aluminium nitride, is there a simple method like Cyanide bath, so we can get Cr=N-N=Al alloy structure ?
North America materials laboratory needed for paint testing: comparison analysis of two paint chip samples to identify if they are from the same source.
Mechanical Laboratory needed for metallic coating testing: ductility measurement on metallic coatings
Large Corporation needs Toxicology Laboratory for the e-screen assay for estrogen activity, also known as the MCF-7 assay.
USA Materials Laboratory needed for ASTM Testing of coating product to ASTM E408Standard Test Methods for Total Normal. Emittance of Surfaces Using Inspection-Meter,
California analytical chemistry laboratory needed for nitrogen testing of gaseous nitrogen analyzed to the requirements of MIL-PRF-27401 Grade B, Greases, Oils & Coatings
India environmental laboratory needed for pigment testing. Ecological & application of Pigments
Microbiology Laboratory needed for microbiology Efficacy testing for growth reduction of Norovirus or Murine Virus
West Coast USA materials laboratory needed for Pull testing for adhesion strength and Hardness test on a coating that has porosity
Turkey analytical chemistry laboratory needed for dye testing for Identification OF Carcinogen Amins and arylamins in a textile dye
India Materials Laboratory needed for ASTM testing: a. Softening point/ ®C b. Heat resistance/®C c. Flexibility in cold term (at -20®C) (Cold Test) d. Viscosity at 180®C e. Processing temperature f. Open time (in sec) g. Cure time (in sec) h. Colour i. Melting flow index j. Melting volume index k. Flow Point (®C) l. Density m. Elast G-module n. Plast. G-module o. Relaxation Time p. Surface Tension q. Milling Behaviour r. Peel Strength s. Water resistance test t. WPS 68 Test u. Base Substrate and Shelf Life v. Time for development of cohesion w. Cohesion and Adhesion with elevated temperatures x. % tackiness and %solid y. Chemical composition of the samples z. Prepare a MSDS sheet for these samples
India materials laboratory needed for coating testing of Acrylic based Anticarbonation coating in support of (Water permeability & CO2 permeability ) DIN 52615 principle at your end. Please give the testing price quotation and other necessary details, like amount of testing material required, time required for completion the test and any are necessary details as required.
USA EPA 1311 TOXICITY CHARACTERISTIC LEACHING PROCEDURE and EPA 3010a Acid Digestion of Aqueous Samples and Extracts for Total Metals for Analysis by FLAA or ICP Spectroscopy / EPA 6010b INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY
Ireland or UK UKAS Toxicology Laboratory needed for FULL TOXICOLOGY TESTING OF INSECTICIDE PAINT
America Microbiology Laboratory needed for antibaterial testing of "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices to ISO 22196 Antimicrobial Activity of Plastics "Measurement of Antibacterial Activity on Plastics Surfaces "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices. (we apply to window of smart phone, camera, tablet PC, E-book and so on.) Thickness of Coating is very thin(10~20nm) and characterictics is hydrophobic surface. (Anti-Fingerprint, Anti-Fouling) and added Anti-bacterial contents. (keep health from bacteria)
I have several questions about Anti-bacterial test 1. test spec (ex : ISO 22196)
2. process (How much takes a time to test, contract, method etc.)
2. Necessary documents
3. The number of samples needed to test (coating and non coating)
USA Materials Laboratory needed for International Laboratory Accreditation Cooperation ILAC Testing. Analysis as outlined in 4.4 MIL-2262
EPA Environmental Laboratory needed for OECD Testing,GUIDELINE FOR THE TESTING OF CHEMICALS to: OECD 105, Water Solubility OECD 107Partition Coefficient (n-octanol/water): Shake Flask Method or OECD 117, Partition Coefficient (n-octanol/water), HPLC Method
USA ISO Materials Laboratory needed for ISO Testing: Light Fastness to ISO 2135, Anodizing of aluminium and its alloys Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
Eastern USA Toxicology Laboratory needed for OECD Testing to OECS 202, for transportation Classification (Class 9) under IATA, IMDG and ADR. Daphne acute immobilization and reproductive test. EC 50 / 48 h to determine Class 9 per IATA, IMDG and ADR. Five to ten samples possible.
India Materials Laboratory needed for INTERMEDIATE DYES CHEMICAL TESTING to BIS 229,1993 or ASTM, ETHYL ACETATE (PAINTS, THINNER FOILS)LACS WAX, SHELLAC , DEWAX ALEURETIC ACID. ETC.
India Electrical Laboratory needed for Electrical Resistance Testing in accordance with MIL-DTL-5541 Cl-3, Military Specification, Chemical Conversion Coatings on Aluminum and Aluminum Alloys
Adhesive tapes Manufacturer needs India materials laboratory for physical testing: Peel strength & Shear Strength Test for our product at various parameters as mentioned below , Request you to provide your lowest possible Quote for the same. Si.no Type of test Substrate 1 Peel strength ? (25?C , 3 minutes ) Painted panel & PP panel 2 Peel strength ? Initial state (25?C , 20 minutes ) Painted panel & PP panel 3 Peel strength ? Normal state (25?C , 24 hrs ) Painted panel & PP panel 4 Peel strength ? Heat ageing ( 80 ?C 7 Days ) Painted panel & PP panel 5 Shear strength ? Ageing ( - 30 ? C 7 Days ) Painted Panel Vs PP panel 6 Shear strength ? Initial state(25?C , 20 minutes ) Painted Panel Vs PP panel 7 Shear strength ? Normal state (25?C , 24 hrs ) Painted Panel Vs PP panel 8 Shear strength ? Heat ageing ( 80 ?C 14 Days ) Painted Panel Vs P
Physical Laboratory needed for epoxy bond testing to ZTV SIB 87 bond/pull off testing of epoxy coating applied to concrete substrate . Compressive strength,abrasion resistance and modulus of elasticity
Southeast USA Materials Laboratory needed for EPA Testing, VOC Testing to EPA Method 24 for surface coating Need to to know VOC content in grams per liter
Materials Laboratory needed for epoxy testing: Barcol Impresser 934-1 for Epoxy 3 samples, 4 points on each sample Hardness Measurements
Large adhesive manufacturer needs materials laboratory for Thermomechanical Analysis of anaerobic adesives, in that there is test named as Coefficient of thermal exapansion and Coefficient of thermal conductivity in our lab there is no inrtument for these tests. so i kindly request you that if you have any idea about these please inform me.
Pakistan Materials Laboratory needed for piment testing of reactive pigments and binder of sandal dyestuff
Materials Laboratory needed or DIN Testing: (DIN Standards) for Synthetic PVC water proofing membrane, are available at your lab or not. Please confirm me as early as possible or advice, so that we can proceed further. Very Urgent. 1. DIN 53363: Tear Resistance 2. DIN 16726: Puncture resistance & Hydro Static Pressure Resistance. 3. DIN 4062: Root Resistance.
Saudi arabia sealant manufacturer needs Saudi Arabia materials laboratory for materials testing : 1. Elongation test. 2. Hardness test. 3. tensile test. 4. adhesion test. 5. viscosity test.
Product Safety Laboratory needed for REACH Testing of liquid dyes which we will be required to REACH register in our roll as lead registrant Could you please quote to carry out a full range of studies necessary to complete a 100-1000tpa REACH registration dossier, including substance ID.
Thanks in advance
Dallas, Texas Material Laboratory needed for SAE Testing: Xenon CI4000 testing for 2000 hours per SAE J2527
California analytical chemistry laboratory needed for composition testing of photoresist spin-coat resin mixture, with component identity and concentration. Mixture components are already partially known, but we require exact identity. We also would like to determine viscosity and spin speed/thickness curve."
India ISO 17025 accredited materials laboratory needed for TBT Content testing i Tin free CR Anti-Fouling Coating Paint.
US, Canada or Europe materials Laboratory needed for Material/Coating testing for concrete.
Anti-carbonation test quote for EN 1062-6
We have an elastomeic masonry coating that we need to get tested for anti-carbonation properties using EN 1062-6. This is for export from the US so we need the test to be done per the EN method or a recognized alternate.
California Materials Laboratory needed for performance testing, Green Energy Paint testing applied on automobile mainly truck( fuel tank to reduce fuel consumption. We need a quotation for conducting an actual performance test.
Architectural Coating Manufacturer needs Materials Laboratory for Quality Control Evaluation. Need to come to plant and give us a complete feedback of the situation of the plant. (Qc). We are manufacturer of architectural coatings (latex based). More in detail, we would like to have : â?¢ An expert on site to visit the plant â?¢ Samples taken at different stage of the process to see if we have contaminant, and where. â?¢ We would like to cover the plant from the raw material arrival to the production tanks and mixers, and the final products, plus the air quality. â?¢ We would like to have a clear analysis of the current situation. â?¢ We would like to have assistance to improve our way of working if needed.
Consumer Products laboratory needed for dry erase pain testing of paint product when applied according to the manufacturer's instructions.
Minnesota materials and weathering laboratory needed for coating testing : transmission/reflectance of coating, durability and salt spray testing
India Materials Laboratory needed for ASTM Testing, Surface tension of clear paint - 5 samples
Anti-bacteria painting, and want to take a Resistant Strian Test with this paint submt to BS EN 13692:2001, the test should include the bacteria as follows, Test bacteria kinds£ºA.baumanii A.niger C.Albicans C.difficile E.coil E.hirea MRSA P.aerugiosa S.aureus
India materials Laboratory needed for TSR Test, total solar reflectivity testing for coating material no of sample 6
Coating and Paint Mfg needs materials certification laboratory for test certifications for our thermal insulation coatings, which we are manufacturing.
ISO, EPA GLP,CPSC Toxicology Laboratory needed for mammalian inhalation studies oral testing, LD50 testing and LC50 testing .Three to six samples of paint or paint-related material to be tested
Preclinical Contract Research Organization needed for testing: 1. In-vitro skin irritation 2. In-vitro eye irritation 3. Ames Test 4. Local Lymph Node Assay
California Analytical Chemistry Laboratory needed for ASTM Testing, flash point testing to determine flammability labeling for a paint related product.
Materials Laboratory needed for sealant testing of Tile adhesives, grouts, render, and other construction products.
Physical Laboratory needed for Microscopy/Image Analysis-Preliminary work established that a ZnSe ATR crystal can "see" through all three coatings we apply into the paper substrate. These coatings all cure or dry to fixed films, so samples of varying thickness can be prepared which will not change over time. We want to correlate the ratios between selected substrate and coating FTIR absorptions with the cured coating thicknesses to generate a process monitoring and QA inspection tool. We will provide coated samples marked where FTIR-ATR measurements were made and require cross-sectional imaging in those marked areas to measure coating thickness.
USA EPA Analytical Chemistry Laboratory needed for EPA 311 analysis on coating samples.
Europe EN Analytical Chemistry Laboratory needed to test photocatalyst coating applied on hard surface sample, ceramic tile for example as per EN13697:2001.
Toronto Analytical Chemistry Laboratory needed for testing paint samples that are "yellowing" due to unknown source or conditions, need to determine cause, can have as many samples as required.
EPA Environmental Laboratory needed for certification testing for photocatalytic paint certificate.
AS Physical Laboratory needed for Modified salt spray testing in accordance to AS 3566 Australian standards Class 1-4
Analytical Chemistry Laboratory needed for EPA Testing and DOT Testing, Solid Oxidizer Test according to EPA method SW-846 1040
Analytical Chemistry Laboratory needed for testing Polymer coatings for acrylic oligomer separation and identification.
Hong Kong based paint company needs microbiology laboratory for microbial efficacy testing of chemical to kill virus H1N1. We want to find a lab which can perform the test and prove the killing performance of the chemicals.
USA Materials Laboratory needed for Automated washer cycle testing by conducting cycle testing of components (qty TBD) with various coatings to determine corrosion resistance to high pH (Neodisher) detergents in an automated washer (i.e. Miele G 7835). Can email test protocol upon request.
India ASTM Materials Laboratory needed to test our specialty coatings/paint for fire retardant characteristics based on ASTM D 1360 or some other equivalent standard to determine the fire retardant/self extinguishing characteristics of our anti corrosive surface protective coatings.
India ASTM Materials Laboratory needed for fire retardant test for specialty coatings.
USA Optical Laboratory needed for Fluorescent Imaging testing of thin coatings. Thickness measurements would be desired.
Eastern USA Consumer Products Safety Laboratory needed for Lead testing (Pb)in Paint and Other Similar Surface Coatings
India Mechanical Laboratory needed to perform thermal shock experiment on plasma sprayed Zirconia- ceria oxide powder coatings on SUS 304 and Mild Steel.The heating steady state temperature is 1100 ⁰C in 4 minutes and Cooling to 200⁰C in 6 minutes. For every 20 cycles the surface has to be viewed by SEM till the surface starts to peel. 2 samples ( 1 for MS and 1 for SUS 404)
USA Analytical Chemistry Laboratory needed for analysis of Calcium Carbonate Concentrate for use in plastics extrusion. Would like to know percentage of Calcium Carbonate, Particle size of the Calcium Carbonate, any coatings or other additives found in the concentrate.
Textiles Laboratory required for testing nylon material for VW50190 Colorimetric Evaluation VW50185 Resistance to Weathering VW50180 Emission Behavior TL1010 Burning Behavior TL226 paint coatings PV1303 Light Exposure
Materials Laboratory needed for testing dozen different coatings we apply to medical devices. What we want tested is having the parts that are coated gamma sterilized. Our purpose is to determine if the different coatings react differently to gamma radiation.
USA Analytical Chemistry Laboratory needed for analysis of Copper content in 11 solid (powder) thermoset powder coatings consisting of polyester resin and various inorganic and organic pigments, plus additives, generally organic materials.
Coatings Manufacturer needs Texas Laboratory for flammability testing to determine fire rating on an elastomer,& its thermal properties
Weathering laboratory needed for testing pigments for coatings light fastness & weather fastness . Please send your price for testing.
Product Safety Laboratory needed for testing inks and coatings of our greeting cards to see if they are in compliance with state and federal regulations.
Eastern USA Materials Laboratory needed for rheology testing for viscosity as a function of shear rate, at temperatures of 40, 80 and 120 F, of about 10 resins used to make coatings, because I am trying to design a pump/piping system.
USA Analytical Chemistry lab needed to analyze several rounds of liquid samples (surface coatings, epoxies, etc.) for our company- we will need to send in approximately 6 samples every two weeks for an unknown length of time. We would need to test for: 4, 4' - Diphenylmethane Diisocyanate (CAS Number 101-68-8)
US Metallurgial Lab needed for ASTM E430 Gloss measurement of Metallic coatings on steel substrate: chromium, electroless nickel, electroless nickel with teflon co-plating, electroless nickel with SiC co-plating"
SE USA GMP, GLP Microbiology Lab needed for AST microbial analysis of process water, coatings, effluent, raw material storage tanks, head box, broke chest
Optical Lab needed to determine the UV transmission of various coatings applied to a glass substrate.
Materials Testing Lab needed for development and testing work for UV Curable Coatings and Adhesives
Materials laboratories needed for ASTM testing for composite coatings (ceramic, polymer, composite). In the next few months we will have about 60 samples for each of the listed tests. Your prompt response regarding the costs is appreciated in advance.
1. Nano hardness test on cross section of coating (for very thin coating) 2. Micro hardness on cross section of coating 3. SEM images from the coating cross section and top surface 4. Ball on disc wear test to measure the coefficient of friction and weight loss, ASTM G99-05 5. Taber test for 1000 cycle, ASTMC4060 CS17 6. Salt spray test for 1000 hours, ASTM B117 7. Adhesion test with pull-off method on one inch diameter sample, ASTM C633-01 8. Porosity measurement with image analysis. ASTM E2109-01. 9. Porosity level and pore size distribution with mercury intrusion method. 10.
Analytical Chemistry Laboratory needed for volatile analysis released during curing of coatings. The test may require curing a resin in a convection oven, sample the exhaust air for analyzing volatiles. The study should also include the effects of air flow rate on volatile emission
Materials laboratory needed for Reflectance Testing of cured coatings of glossy black shall be tested for reflectance per the following requirements: Specular reflectance (nominal incidence): 5.0% maximum Diffuse reflectance (total hemispherical reflectance minus the specular component): 0.8% maximum The sample reflectance shall be measured using a large sphere color eye (kolimorgan) or equivalent and a reference sample of known spectral specular and diffuse reflectance over the range 0.4 to 1.1 microns.
Physical laboratory needed for surface tension testing of a dispersant used in paint and coatings. It is a 40% polymer solids material in water.
Analytical chemistry laboratory needed for synthesis and ASTM physical testing diols, diacids and diamines tested in high solids coatings, powder coating and UV cure polymer applications. Testing to include cid number, hydroxyl number, solubilities, Tg values, Sward Hardness, Pendulum Hardness, Pencil Hardness, Impact resistance, Gloss, Acid Etch Resistance, Hydrolytic Resistance. Data is needed for development of marketing information.
Materials laboratory needed for reflectance testing of various surface finishes and surface coatings.
GLP, ASTM physical laboratory needed for ASTM 6442 testing for Copper, zinc release from from antifouling coatings
-ASTM F1148 PERFORMANCE TESTING FOR TOYS: -LABELING AND INSTRUCTIONAL REVIEW -BEARING ATTACHMENT -Hazardous Products (Toys) -Mechanical Hazards Testing (Includes: Drop Test; 10 -Push-Pull Test; Sharp Edges/Points, Small Parts; Noise Level, etc. -Flammability of Fabrics -Cellulose Nitrate -Heavy Metals Analysis of Applied Surface Coatings