Most Recent qualification Laboratory Test Requests

Contract Laboratory has received the following qualification Laboratory Test Requests which need to be fulfilled! These qualification Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their qualification Laboratory Test and Scientific Research. If you need a qualification Laboratory, please Submit a qualification Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

Pharmaceutical Packaging Testing

Description:

Pharmaceutical Company needs Packaging Laboratory needed for ASTM burst testing on around 90 plastic heat-sealed 8 x 5 packages as part of the qualification for our sealing process according to ASTM F1140 Standard Test Methods for Internal Pressurization ...

Requirements:

ASTM F1140

View More


Title:

EPA Air Sampling Tube Testing

Description:

EPA Environmental Laboratory needed for air sampling tube testing to EPA TO-17 test on 90 tubes for Transfluthrin.

Please provide quote that describes:

1.) How the standard curve will be produced (how many points in the curve, limit of d...

Requirements:

The test is for Transfluthrin
Tube info:
Stainless Steel TD Tube for Perkin Elmer ATD
100mg Tenax TA 35/60 / 100mg Carbograph STD 40/60 With Brass Compression Cap (Swagelok) Preconditioned: Yes
Brand: CAMSCO

View More


Title:

Sauce Packaging Qualification

Description:

Food company needs FDA food laboratory to assist in qualification / stability testing of sauces packaged in vacuum packed jars.

Requirements:

FDA - Agricolture departament Florida

View More


Description:

Large Manufacturer needs either ISO 17025 or NADCAP or Rolls-Royce Approved Laboratory for ASTM corrosion testing of two type of organic solvents against the requirements of ASTM F945 (stress corrosion on titanium).

Requirements:

The lab shall hold either one of the qualifications:
1. NADCAP (relevant approval)
2. Relevant national accreditation body
3. Rolls-Royce approved lab
4. Relevant ISO17025 certification

Report shall contain:
1. Date of test
2. Identification nece...

View More


Description:

LONG-TERM TESTING Pharmaceutical Laboratory needed for raw material release and vendor qualification testing with full USP/NF/Ph.Eur. testing and method verification for three lots of all the following materials
Materials:
Cholesterol
Sucrose
L-Hist...

Requirements:

IMPORTANT Please provide me with a quotation as well as an assessment of your facilities capacity and availability to support all of these materials (or any limitations in terms of testing of specific materials you cannot support).

View More


Description:

Packaging Laboratory needed for DOT UN box design qualification testing. The packaging manufacturer shall achieve successful test results for the design qualification testing at the start of production of each new or different packaging.

Requirements:

DOT UN Box testing

View More


Description:

LONG-TERM TESTING Engineering company needs oil laboratory for oil testing and studies to support Master Service Agreement (MSA) qualification with a major oil company. The analysis required is

1- Chemical/Geochemical Analyses
2-:Elemental Sulfur/Sul...

View More


Description:

Bioharmaceutical Contract Research Organization needed for initial method development and qualification of sterility, mycoplasmas, and bioburden tests for biologic materials.

View More


Description:

LONG-TERM TESTING Private clinical trial and internal medicine practice needs CLIA certified clinical laboratory to perform all routine clinical blood analysis for both reasearch / clinical study qualification and montitoring as well as the private intern...

Requirements:

None

View More


Description:

Automotive laboratory needed for complete cable qualification program testing in accordance with Renault 36-05-009, Single-core automotive cables.

View More


Description:

Analytical chemistry laboratory needed for ASTM testing of silicon based chemicals to ASTM E222-10: Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation for vendor qualification.

View More


Description:

URGENT TESTING Consumer product safety laboratory needed for CPSIA toxicology and product safety testing of kids' makeup.

Requirements:

The lab should be an authority in cosmetics and CPSIA children's product testing /qualification. We want to be able to move quickly on this.

View More


Description:

Consumer safety / building materials laboratory needed for safety, durability, and structural performance testing of a cabinet unit according to ANSI/BIFMA X5.9-2012.

Requirements:

ANSI/BIFMA X5.9-2012.

View More


Description:

Packaging Laboratory needed for medical device package design qualification testing of a UN 4G fiberboard box
and 47 x 40 x 1.5-mil poly red bag with twist tie and knotted closure.

Requirements:

Box Information: 32# ECT (38-26C-38) / D/C Special Design style / ?C? flute / glued joint / Extended design carrying handles / Auto bottom / interlocking top
Part Number: 17 x 14 x 19
Outer Dimensions: 18 x 15 ¼ x 20 1/8 (24 ¼)
Inner Dimensions: 17 ¾ x...

View More


Description:

Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:

1. SWL loading IEC 61537 Cl. 10.2-10.8 (and Annex D.1) (to residual deflection
measured by instruments wi...

Requirements:

1. SWL loading IEC 61537 Cl. 10.2-10.8 (and Annex D.1) (to residual deflection
measured by instruments with a resolution of 0.5mm or better and a precision
of 0.1 mm or better in all range of the equipment per cl. 5.9)

D.1 states Trays mesh, solid...

View More


Description:

Medical Device preclinical contract research organization CRO needed for insulin characterization with or without infusion through medical device: (1) High molecular weight proteins (insulin aggregates), (2) Preservative content (m-cresol), (3) Impuritie...

Requirements:

All of these tests would be performed on samples collected with/without infusion through medical device.
We plan to collect samples at our company and ship to you for analysis (assuming we don?t have storage stability issues).

View More


Description:

Personal protective equipment laboratory needed for ASTM F2675 Arc Flash testing of a protective glove. Quote needed.

Requirements:

ASTM F2675

View More


Description:

Automotive laboratory needed for ASTM D5500 (Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation) or D5598 (Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition...

Requirements:

ASTM D5500 or D5598
Quantity of gasoline per test needed

View More


Description:

LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and natural gas industries -- Composite repairs for pipework -- Qualification and design, installation, test...

Requirements:

Houston testing preferred

View More


Description:

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching test - Based on EN12457 - 2 Part 2 and EN - 12506
2. Sulfur test - Based on ISO 4689-3 : 2004
3. Determina...

Requirements:

IEC 62561

View More


Description:

Nutritional laboratory needed for labeling claims testing of vitamins: qualification and quantification testing of vitamins in a premix powder to meet labeling claims for the following:
Niacinamide 20 mg
D-Calcium Pantothenate 5 mg
Cyanocobalamin 4.97 ...

Requirements:

USA laboratory

Niacinamide ? 20 mg
D-Calcium Pantothenate ? 5 mg
Cyanocobalamin ? 4.97 mcg
Pyridoxine HCl ? 5 mg
Caffeine, anhydrous ? 150 mg
Inositol ? 30 mg
Taurine ? 1001 mg
Serving size is 1340 mg with a maltodextrin filler.

View More


Description:

Large hotel chain needs Food laboratory needed for ground beef testing to determine fat content and the raio between meat solids and fat.

Requirements:

Refrigeration
Fat content to determine the ratio between meat solids and fat.

View More


Description:

Medical devices laboratory needed for testing a medical plaster bandage according to Medical Devices Directive 93/42/EEC Annex VII for approval of European Conformity (CE) marking.

Requirements:

Medical Devices Directive 93/42/EEC Annex VII

View More


Description:

URGENT. Analytical chemistry laboratory needed for testing of agarbatti for composition.

View More


Description:

Electrical laboratory needed for full scale testing of a LED light panel.

View More


Description:

Food testing laboratory needed for performing color testing analysis on confectionery items such as Blue 1 (E133), Red 40 Lake (E129), Blue 2 Lake (E133), Carmine Color (E120), and Yellow 5 (E102).

View More


Description:

Oil Laboratory needed for Petroleum quality testing prior to export from Yemen

View More


Description:

Food laboratory needed for nutritional analysis of kombucha for nutrition content.

View More


Description:

Cosmetic laboratory needed for testing for the presence of a colored dye in sample for FDA certification.

Requirements:

Test in USA

View More


Description:

URGENT, LONG TERM. Certified plastics welding laboratory needed for peel and crush testing of polyethylene coupons on electro-fusion welding joints according to EN 13067.

Requirements:

Peel Test or Crush Test as per EN 13067

View More


Description:

Food laboratory needed for Ph level, nutrition facts and food labeling testing of marinade and sauce to meet certification standards of Virginia department of health.

Requirements:

Ph level, nutrition facts for food labeling.

View More


Description:

Chemistry and advanced material laboratory needed for camphor analysis, and ice sheet quality assurance testing.

View More


Description:

FDA GLP laboratoryneeded for vendor qualitificaiton testing of surgical drapesL Resistance to microbial penetration - dry and wet, Cleanliness-microbial, particulate matter, Linting Resistance to liquid penetration, Burst strength-dry, wet, Tensile stren...

View More


Description:

URGENT NEED: Chicago restaurant needs Sushi rice tested to certify ph is 4.1-4.6

View More


Description:

Property company in UAE needs Thermal conductivity & Thermal Resistance test of Rigid Polyurethane Foam core (PUR sandwich Panels) as per EN 12667 test procedure conforms to EN 13165:2012.
ISO 8301, ASTM C 518 test procedure

View More


Description:

Packaging/container company needs laboratory to test the breakdown of poly-lined containers for milk and similar consumables by means of hydrochloric acid or nitric acid.

Requirements:

batch testing and rapid response.

View More


Description:

FDA 175.300 and ISO 17025 accredited laboratory needed to test polymeric coating samples for repeat use with food contact, in order to use it to line food processing tanks and pipes.

View More


Description:

UK Medical device company needs paper surgical adhesive tapes tested

Requirements:

tests required:
1. adhesion to steel
2. self- stick adhesion.
3. weight of backing material
4. weight of adhesive mass
5. minimum breaking load

View More


Description:

Large medical company needs to test drug delivery of Taxol via small bore connections against chemical stress cracking per ISO 594-2, DIN 13276, DIN EN ISO 80369-1 standards

View More


Description:

Large manufacturing company needs testing of Sealants (Silicone/PU/Acrylic) used in building and construction to comply with ASTM standards (ASTM C920, ASTM C719, ASTM C834) We are based in Dubai - UAE

View More


Description:

Container company needs laboratory for UN annual retesting of overpacks to assure UN compliance per 49 CFR 173.25

Requirements:

we have 4 styles of Overpacks that need to be tested. please send pricing and lead time.

View More


Description:

Major beverage production facility needs ANSI/ASHRAE 52.2 Standard testing completed on air filters used in the building to determine current Minimum Efficiency Reporting Value (MERV) rating for filters.

Requirements:

We will supply air filters for testing.

View More


Description:

Large European food packaging company needs FDA compliance test and safety check for a High-density polyethylene (HDPE) container used to package chewing gum to ship to US markets.

Requirements:

We use two technologies: injection for closures, blow moulding for bottles/ containers.
Our products pass the criteria of the food contact regulations obligatory in European Union - we have raw materials certifications, migrations tests and organoleptic...

View More


Description:

Large manufacturer of electro-mechanical products for the aerospace industry needs test facility for various types of compliance testing per DO160G and BS.3G.100,Part 2.

Requirements:

few tests as per DO160G and BS.3G.100,Part 2,
-Fungus
-FLUIDS SUSCEPTIBILITY
-ICING
-Salt spray
-Lightning
-explosion proof
-fire resistant

View More


Description:

LONG-TERM TESTING Analytical Chemistry Laboratory needed for qualification testing to determine inhibitor (MeHQ) and PTZ (Phenothiazine) in acrylates by HPLC. We expect to have 2 samples ready for this test the week of 11/14-18. These first two samples ...

Requirements:

Please contact us for a copy of a preferred method and to discuss cost and turn around time.

View More


Description:

FDA GMP contract testing laboratory needed for full USP monograph testing on the following medical grade gases: N2, O2, CO2 as part of Raw Materials vendor qualification program.

View More


Description:

Pharmaceutical virology laboratory needed for Plaque assay of viruses (vesicular stomatitis virus) method transfer, method development, and method qualification

View More


Description:

ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 for the 120 Day Accelerated Water Treeing Test followed by test protocol to include Electrical Measurements...

View More


Description:

Laboratory needed for development of companion animal lateral flow antibody and antigen diagnostic test products including Canine Heartworm, Lyme disease, Ehrlichia canis, Anaplasmosis and in the feline, FeLV and FI .Need USDA required testing for sensiti...

View More


Description:

Bioanalytical Laboratory needed for protein characterisation studies using analysis techniques/toolsused in a protein formulation?to demonstrate the utility of our own characterisation tools in such. We will need to have samples run on some characterisat...

Requirements:

Bioanalytical characterisation analytical techniques

View More


Description:

Large corporation needs laboratory for LC/MS quantification of synthetic cannabinoids in urine samples specifically: AB-PINACA and its metabolites (AB-PINACA pentanoic acid is a must), AB-CHMINACA, UR144 and its metabolites

View More


Description:

Aerospace company needs Metrology Laboratory for ANSI calibration & testing

View More


Description:

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Temperature 134 C
? Cycle for 5 mins
? 1000 times
Need to obtain a test report.

Requirements:

? Temperature 134 C
? Cycle for 5 mins
? 1000 times

View More


Description:

Laboratory needed for Deep Freezer and Ice Lined Refrigerator Testing to WHO / PQS standards:
WHO/PQS/E03/FZ01-VP.2, Refrigerators and freezers for storing vaccines and freezing water-packs for Deep Freezers &
WHO/PQS/E03/RF03-VP.2 for Ice Lined Refri...

Requirements:

1) Deep Freezer
2) Ice Lined Refrigerator
WHO ?PQS standards,
Testing according to
WHO/PQS/E03/FZ01-VP.2 for Deep Freezers &
WHO/PQS/E03/RF03-VP.2 for Ice Lined Refrigerator

View More


Description:

Sensory and analytical chemistry laboratory needed for comparision testing vendor qualification of activated carbon to be used for odor absorption of odor-proof bags for transporting aromatic flowers. We are in the process of acquiring samples from va...

Requirements:

Carbon tetrachloride and benzene adsorption tests with quantitative analysis. If possible, we would also be interested in testing the adsorption capacity of fabrics for aromatic terpenes, such as limonene , linalool, caryophyllene, myrcene, pinene, and...

View More


Description:

Start-up Nutraceutical company in the process of sourcing raw material for supplements needs laboratory for vendor qualification testing to test samples from potential vendors. We are looking to do purity tests for 1-2 samples of each of the following in...

Requirements:

We are looking for a fast turn around time of less than one week for our tests.

View More


Description:

LONG TERM TESTING Analytical Chemistry Laboratory needed for periodically quality control testing silica gel prior to procurement of large quantities to strict quality standards.
Material : SILICAL ? SORBEAD ?R?
Parameters:
1. Chemical composition
2....

Requirements:

Material : SILICAL ? SORBEAD ?R?
Parameters:
1. Chemical composition
2. Shape
3. Color
4. Bead size
5. Pore diameter
6. Pore volume
7. Specific surface area
8. Bulk density
9. Specific Heat
10. Attrition Loss
11. Expected life
12. Crushing St...

View More


Description:

Contract Laboratory needed for Independent testing of Duct Mount Humidity Transmitters (2% accuracy) from Automation Components Inc, Dwyer, Setra, Vaisala, and Veris. We would like to run tests on three units from each manufacturer (15 total).

Requirements:

We would like most of the equipment used in this testing to be National Institute of Standards and Technology (NIST) traceable but it is not necessary. Other accredited industry standards might be acceptable.

View More


Description:

Analytical chemistry laboratory needed for biofuel analysis, specifically tallow. To identify the presence of, and if possible quantify, three phosphates in particular:

Sodium Calcium Phosphate
Sodium Hydrogen Phosphate
Sodium Phosphate Hydrate

...

View More


Description:

Contract Laboratory needed for evaluation of the efficiency of air filtration media at adsorbing common gas phase pollutants. We are particularly interested in nitrogen oxides, carbon monoxide, and sulfur dioxide. The test must quantify the upstream chall...

View More


Description:

Test Laboratory needed to perform filtration efficiency and pressure drop analysis on developmental media coupons. We prefer that a TSI 8130 be used for this testing, but other suitable equipment will be considered. The number of samples will vary so plea...

Requirements:

We prefer a TSI 8130 instrument be used for the testing.

View More


Description:

Contract Research Organization needed for performance testing of a microbiology pumps used in laminar flow hood.
One of the requirements for the pump hardware is that it be aerodynamic such that it does not create dead spots in a laminar flow hood.
...

View More


Description:

USA Laboratory needed for smoke testing of lamiar flow hoods to of pump hardware that need to be aerodynamic such that it does not create dead spots in a laminar flow hood. We need to tests whether it create dead spots in the laminar flow hood. This is d...

Requirements:

We prefer that the lab is located in Massachusetts, USA

View More


Description:

FDA / USDA Pharmaceutical Laboratory needed for Herbal Medicine testing meeting FDA/USDA standards:
Pesticide residues testing
Limit tests for heavy metal
Assay testing
Microscope examination of traditional herbal medicine
herbal medicing fingerpri...

Requirements:

Pesticide residues testing
Limit tests for heavy metal
Assay testing
Microscope examination of traditional herbal medicine
herbal medicing fingerprint research
Impurity testing
Extract testing
Tannin testing
Pulvis uniformity testing
Rancidin...

View More


Description:

Cabling company needs contract laboratory to perform Core qualification tests according to ICEA S-94-649/AEIC CS8, Standard for. Concentric Neutral Rated Cables

Requirements:

One year Accelerated Water Treeing Test

View More


Description:

Technology Laboratory needed for new panel design tests including theArc Resistant testsWe also need a Arc resistant test for a MCC, but for this MCC we already have the certifications for design tests. What information do you need to inform me the commer...

View More


Description:

Europe FDA GLP Preclinical Laboratory needed for Development and qualification for disulfide scrambling and determination of free SH, ATM release

Requirements:

development, qualification, ATM release, GLP

View More


Description:

Canada Packaging Laboratory needed Leak Vacuum Decay Testing on Canisters. As part of quality system, the seal qualification needs to be done before the equipment is put on the operation. The size of the canister is diameter: 5.25?, height: 7.5?.

Requirements:

View More


Description:

Materials laboratory needed for wax testing: congealing points of waxes for method qualification

Requirements:

confidential

View More


Description:

URGENT: Large company needs Los Angeles California Textile Laboratory for immediate vendor qualification testing: Textiles Testing for
Fiber Content. Needs rapid turn around.

View More


Description:

Western United States Pharmaceuticals Analytical Chemistry Laboratory needed for raw material vendor qualification testing: USP Chemistry Testing (Amino Acids, Mineral Compounds, etc) There will be various samples. I am looking for a lab to qualify ingred...

Requirements:

Confidential

View More


Description:

LONG-TERM TESTING: Pharma needs Lab for water Testing of water produced by the company water purification system for resistivity and total organic carbon. Minimum 8 samples within 3 months will be submitted weekly. Testing results needed for operational ...

Requirements:

Not specified. Testing results needed for operational qualification of the internal water purification system. Purified water is used only for analytical purposes (HPLC and GC). Contact information and company are confidential.

View More


Description:

Large Energy Company needs electrical laboratory for electrical testing on grid system. Type Tests - ? Control Type Test?,
Specified test will be performed on DUT as Grid proprietary set of cubicles called Overall dimensions and simplified list of I/O ...

Requirements:

LIST AVAILABLE VIA EMAIL

View More


Description:

Europe or Middle East Laboratory needed for materials testing : Coating testing to EN10290 for Qualification of polymer pipe coatings

Requirements:

Laboratory has to be accredited for EN10290

View More


Description:

Polymer Laboratory needed for NORSOK Testing: NORSOK M-710,Qualification of non-metallic sealing materials and manufactures. what is the price for one material?

View More


Description:

Physical Laboratory needed for NORSOK Testing: Physical testing for elastomeric materials Ageing (sour fluid exposures) to NORSOK M-710, Qualification of non-metallic sealing materials and manufacturers
RGD resistance

Requirements:

NORSOK M-710

View More


Description:

MIDDLE EAST COMPUTER LABORATORY NEEDED FOR
PETROLEUM & GAS REFINING SIMULATOR TESTING OF SOFTWARE

DESCRIPTION:-
DYNAMIC REAL-TIME PROCESS SIMULATOR.THE TRAINING OF THE SOFTWARE ARE PROVIDE SKILLS FOR TRAINEES TO MANIPULATE ALL OPERATIONAL MALFUN...

View More


Description:

Europe Preclinical Laboratory needed for toxicological assessment and genotoxicity studies for one of our active pharmaceutical ingredients (API).Structural Assessment, Hazard Evaluation and Classification, Qualification of Level present and/or Safety Tes...

Requirements:

i wish for my contact information and company to remain confidential (only to share with the laboratory contacts found for this request)

View More


Description:

Physical Laboratory needed for solar panel testing for strength of the our racking system against wind and snow load. Tensile test for racking system (including end clips, mid clips , nuts and bolts) is a good idea to prove strength of the system against ...

View More


Description:

USA Mechanical Laboratory with qualifications needed for ANSI / SCTE-60 Testing AMERICAN NATIONAL STANDARD / Society of Cable Telecommunications Engineers Test Method For Interface Moisture Migration moisture migration test over several (maybe 10 samples)...

Requirements:

Must be qualified for test. Reference standard would be ANSI/SCTE-60

View More


Description:

Large Electronics Mfg needs West Coast USA electrical laboratory for qualification testing of electrical brushless motor connector contacts to separate peak and RMS current requirements.

Requirements:

Confidential

View More


Description:

FDA cGMP Compliant Analytical Chemistry Laboratory needed for Bulk Chemical Supplier Qualification Testing and Stability Study Testing of repackaged API, especially Erythromycin and Ketoprofen

Requirements:

Lab must be FDA-regisitered, cGMP compliant, familiar with USP Monographs and ICH Guidelines

View More


Description:

USA electrical laboratory needed for electromechanical QPL qualification testing Short Circuit Test per MIL-PRF-22885 Section 3.29 , subsection 4.7.24.1 method I

Requirements:

For Electromechanical QPL (qualification testing)

View More


Description:

Europe Mechanical Laboratory needed for static tensile tests and notch impact at RT and Low Temperature for FAA-Valid Material Qualification (B-Values).

View More


Description:

Radiological Laboratory needed for testing Epoxy base paste for radiation(10 to the 8th power) tolerance
)radiation

Requirements:

None available Testing for qualification/ certification

View More


Description:

Kansas City, MO or Kansas City, KS AWS, ASME Mechanical Laboratory needed for mechanical tensile and bend testing for welding qualification.

Requirements:

AWS, ASME

View More


Description:

USA Analytical Chemistry Laboratory needed to do some validation and qualification testing on reagents that are received from outside vendors to confirm that the certificate of analysis that we receive from the manufacturer is accurate. The following reag...

Requirements:

Yes, keep confidential.

View More


Description:

Contract Analytical Organization (GMP) needed for transfer, possible development, qualification, and testing of residual ficin by MALDI MS.

Requirements:

GMP Please keep company name and contact information confidential.

View More


Description:

Large electronics mfg need IPC-TM-650 2.3.28 Ionic Chromatography testing as process qualification on modled electronics parts This test is required when starting a new assembly line, switching to a new printed circuit board supplier, changing a pcb supp...

Requirements:

ProcedureIonic Chromatography test procedure is defined per IPC-TM-650 2.3.28. Limits Incoming PCB Processed PCB Maximum Maximum Levels (µg/in2) Levels (µg/in2) Chlorides 2.5 3.5 Bromides 3.0 10 Sulfates 3.0 3 Fluoride <0....

View More


Description:

Canada ISO Laboratory needed to measure siloxane cyclics (D4-D6) in water and alcohol solutions using gas chromatography.
There will be 150-300 samples.

Requirements:

a minimum of ISO qualification

View More


Description:

India EMicrobiology Laboratory needed for sanitization qualification testing: Initially How to qualify the area what parameters should be considered Please explain as per guidelines.(by settle plates(for how many hours),Air sampling and surface etc).

Requirements:

Sanitization procedure,settle plate exposure for how many hours as per guidelines,Air sampling and surface monitoring. Please keep confidential.

View More


Description:

USA Analytical Laboratory needed for testing Activated Alumina products. SPX dehydration & Filtration is a manufacturer of compressed air & gas drying equipment. We are going through a round of vendor qualification tests for activated alumina products a...

View More


Description:

USA FTMS 191A Method 5762FTMS 191A Method 5460 - Helium Materials Testing/Microbiology Laboratory needed for:
First Article - Qualification
Material Fungus Resistance
12 Weeks Exposure
Material Permeability

Requirements:

FTMS 191A Method 5762FTMS 191A Method 5460 - Helium

View More


Description:

FDA USA lab needed to conduct limited qualification of a commercially available EIA kit for measurement of a peptide in rat sera. Analyze 200 - 300 samples from a PK study.

Requirements:

FDA

View More


Description:

Bioanalytical laboratory needed for Qualification of Impurities testing

Requirements:

FDA, EMEA

View More


Description:

Materials laboratory needed to test environmental qualification of electrical diode. I have a Statement of Work and diode specification information - can be supplied based on test house contact.

Requirements:

MIL-STD-1686C; MIL-STD-810F; SAE AS9102; SAE AS9100.

View More


Description:

FDA GMP Analytical Chemistry Laboratory needed for USP, EP, JP Raw material qualification testing for Active Pharmaceutical Ingredient supplier
Non-routine analyses

Requirements:

GMP, USP, EP, JPConfidential

View More


Description:

Toxicology laboratory needed for ecotoxicity testing for EPS1/RM ecology qualification testing - We are ready to begin testing as soon as possible - For efficiency please include all required agreements with initial contact.

Requirements:

EPS1/RM/24 Vibrio fischeriEPS1/RM/21 Ceriodaphnia dubiaEPS1/RM/25Selenastrum capricornutum

View More


Description:

Physical Laboratory needed for Qualification Inspections Testing of lock nuts per NASM25027 Table 13 and Table 14
Samples ready

Requirements:

NASM25027

View More


Description:

GMP Bioanalytical Laboratory needed for all USDA/APHIS qualification of cell line testing under 9CFR section 113.52 and all inclusive therein, need to have testing done to qualifiy a cell line for use in production of biologics.

Requirements:

Testing facility must be recognized as a suitable/compliant source by the USDA. GMP compliant-as regulated by the USDA/APHIS. Please keep contact info confidential.

View More


Description:

FDA Medical devices laboratory needed for testing infusion pump for regulatory submission and need verfication and validation testing to AAMI ID26:2004 and ISO60601-2-24.

Requirements:

FDA qualification

View More


Description:

Physical laboratory needed for AWS and ABS testing of Welding Procedure Development (Bends, tensiles, Xray or UT)and Welder Qualification (Bends or XRay)
Charpy impact (Weld centerline, FL, FL+2mm, and FL+5mm) temps from -20C to -60C.

Requirements:

Testing to AWS and ABS codes

View More


Description:

GMP and non-GMP analytical laboratory needed for polyphenol analysis, RP-HPLC, IR, UV-Vis, GPC, C13NMR, ESI-MS, moisture analysis, pH, etc:

1. Polyphenol LOD/LOQ by(RP-HPLC)

2. IR

3. UV/Vis

4. Inverse gated 13C NMR

5. ES-MS by direct inf...

Requirements:

GMP and non-GMP Contact information and company to remain strictly confidential

View More


Description:

USA Materials lab needed for testing to AWS D1.5 and HAZ CVN. Looking for machining of test specimens rather than the actual testing.

Looking for 3 types of quotes:
1. machine & test
2. machining only
3. machining, with photo documentation of lo...

Requirements:

Type of test: AWS D1.5 welding procedure qualification (require prior experience with this), with additional HAZ CVN testing

View More


Description:

Pharmaceutical company needs laboratory to place 218 lots of analytical research and development stability samples for Pharmaceutical company into stability chamber (25deg. C, 60%RH). The chamber must be qualified, qualification documented and approved." ...

Requirements:

FDA GMP

View More


Description:

Physical qualification testing of a new syringe pump-pressure, flow, occlusion, accuracy etc.

Requirements:

Preparation of an FDA submission - 510(k)

View More


Description:

Need ISO 17025 lab to test polyester polymers for trace levels of antimony (<100 ppm)using AA and for bromine using XFS. Must perform tests using AA and XFS with no substitutions.

Requirements:

Must be ISO 17025 certified laboratory. This is a mandatory qualification.

View More


Description:

Phenol raw material identification and supplier qualification for Health Canada GMP

Requirements:

Health Canada GMP laboratory in Toronto

View More