What can we help you with?
Contract Laboratory has received the following motor vehicles and automotive Laboratory Requests which need to be fulfilled! These motor vehicles and automotive Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their motor vehicles and automotive Laboratory and Scientific Research. If you need a motor vehicles and automotive Laboratory, please Submit a motor vehicles and automotive Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
ISO Automotive Roof Rail Testing
Performance Laboratory needed that is capable of development of a testing fixture and ISO testing of automotive roof rail to ISO PAS 11154 Road vehicl... View More
Automotive Standard Resin Testing
Automotive Laboratory needed for polymer grades (resins) testing to multiple Automotive Standards ( Toyota, Nissan, Honda and BMW) including
Toyota... View More
Automotive FORD Test Method Testing
Automotive Laboratory needed for FORD Test Method WSS-M9P10-B testing for:
Corrosion resistance
Fluid resistance
Resistance to cleaning agents
... View More
Polymer Company needs Automotive Materials Laboratory for Label adhesion testing performed to GM Specification GMW 14573, focus on engine / engine an... View More
USA Automotive Laboratory needed for certification of motor vehicle parts to specifically adult car seat safety to FMVSS. View More
Road Vehicle Component Cleanliness
Large Electronics Company needs USA Automotive Laboratory for VDA 19.1 2015 / EN-ISO 16232 Road Vehicles ? Cleanliness of Components of Fluid Circuit... View More
Automotive Thermoplatic Pellet Testing
Polypropylene manufacturer needs Automotive Laboratory for testing thermoplastic pellets to automotive standards from Toyota, Nissan, Honda and BMW in... View More
IEEE Short Circuit Bus Duct Testing
REQUEST FOR QUOTE Large Transportation Company needs USA Electrical Laboratory Research Facility for Base Standard IEEE C37.23 short circuit testing c... View More
Automotive Part EMSA Certification
Automotive Laboratory needed for ESMA certification testing for vehicle spare parts View More
Europe Electrical Laboratory needed for ISO testing of cable to ISO 6722-1 Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, ... View More
Seat Belt Failure Investigation Examination
Mining Company needs Laboratory for failure analysis investigation of seat belt failure at one of their mines which caused the operator to fall out o... View More
ISO Road Vehicle Cable Testing
Europe Independent Laboratory needed for ISO cable testing to ISO 6722-1 Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, tes... View More
Car Air Freshener Gel Dispensing Problem
Independent Laboratory needed for failure analysis of Car Air Freshener Gel that is experiencing a dispensing problem View More
ABS Sheet General Motors Corporation Standards Testing
Automotive Laboratory needed for General Motors Corporation GMW Testing of ABS sheet to GMW16853 Comprehensive Standard for Overall Emission Testing o... View More
India Automotive Laboratory needed for AIS Anti theft testing of keyset to AIS 075 Approval of Vehicles with regards to their protection against unaut... View More
Video Analytic Software for Speed Detection of Vehicles
Third-Party Laboratory needed for certification testing of Video Analytic Software for Speed Detection of Vehicles View More
ISO Ash Content and Extractable Matter Testing
Large Automotive Parts Manufacturer needs Laboratory that can perform ash content as per ISO 3451 Method A and extractable matter as per ISO 6427. ... View More
Large Automotive Company needs Automotive Laboratory for Vehicle Communication Interfaces VCI evaluation in Test Beds. View More
Automotive Mechanical Laboratory needed for voltmeter specs testing of 1nzfe Toyota rumion testing crankshaft sensor. Specifications for sensor and w... View More
Automotive ELectric Wire Fire Performance Testing
Electrical Laboratory needed for automotive electrical wires and cables fire performance testing according to ECE R118-02 & R100. View More
ISO and IEC Dental Equipment Testing
Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More
ASTM Automotive Insulation Product Testing
USA Automotive Laboratory needed for ASTM testing of a series of automotive insulation products to ASTM C177 (Double-Sided Guarded Hot Plate). There ... View More
Large Industrial Manufacturing Company needs Laboratory for SAE Air Dryer Testing to SAE J2384 Air Dryer Test Procedure, This Standard defines the Tes... View More
Automotive Parts Supplier needs Materials Laboratory for Melt Flow Index analysis of a resins used in a plastic automotive part by Melt Flow Analyzer... View More
SAE Brake Vacuum Tube Assemble
Automotive Laboratory needed for SAE Life testing of Brake Vacuum Tube Assembly to
ESACP1-2420-AH (Ref.: SAE J2045 Sec. 4.6 and SAE J2044 Sec. 7.5 Va... View More
OECD TRANSPORT OF UN DANGEROUS GOODS
Materials Laboratory needed for OECD testing of Automotive Sealer Coating in compliance to Transport of UN Dangerous Goods including the following te... View More
DIN Polycarbonate Optical Distortion
Automotive Laboratory needed for DIN testing of polycarbonate sheet for determining The Optical Distortion And Refractive Power Of Safety Glazing Mate... View More
ASTM Thermal Interface Materials Testing
URGENT Materials Supplier to the Automotive Industry needs Materials Laboratory for ASTM Testing of Thermal Interface Materials to ASTM E595 - Test Me... View More
Large Corporation needs Automotive Laboratory for SAE cable testing to SAE J1128 Low Voltage Primary Cable. View More
Protective Gear for Hi-Visibility. Garments
Large Motorcycle Company needs test facility who has the capabilities to perform testing on protective gear for hi-visibility. Garments will be tested... View More
United Kingdom Agriculture Pesticide Residues Testing
Tree Nurseries needs United Kingdom Agriculture Laboratory for air and surface pesticide residues (dust/droplets/vapours) are on the inside of the equ... View More
Ford Automotive Elastomeric Part Testing
USA Automotive Laboratory needed for elastomeric part testing to Ford Spec WSS-M9P8-C. The testing is for elastomeric parts the testing is environment... View More
Transportation Industry Glass Testing
LONG-TERM TESTING Glass corporation needs a partnership with a large international laboratory for testing their glass used in the transportation secto... View More
SAE Accelerated Exposure Testing
Automotive Laboratory needed for accelerated testing for our plastic nameplates. Duration of 2500 hours. SAE J2527 Performance Based Standard for Acce... View More
Industrial Microbiology Bacterial Study
Automotive Company needs Industrial Microbiology Laboratory needed for microbiological study in which the reproduction is determined on 6 different b... View More
General Motors Worldwide Label Performance
Automotive Laboratory needed for GMW testing of labels to against the GM spec GMW 14573 Global Performance Requirements for Labels View More
GMW Automotive Adhesive Testing
Automotive Laboratory needed for automotive adhesive testing to GMW14573 Label specification testing. Automotive adhesive label testing. View More
Spark Arrester for Internal Combustion Engine Evaluation
Accredited Laboratory needed to screen spark arresters as per the requirements of SAE J350 STANDARD FOR SPARK ARRESTERS FOR INTERNAL COMBUSTION ENGINE... View More
Motorcycle Engine Failure Analysis
Motorcycle shop owner needs Forensics Laboratory for failure analysis of broken piston in a motorcycle engine. View More
US East Coast Automotive Laboratory needed for Ultimate load testing View More
Large Materials Laboratory needed for multiple tests on automotive coating including:
EU REACH
Phys. Chem properties
OECD Tests
Auto flammabili... View More
Rodent Repellent Efficacy Study
EPA Laboratory needed rodent repellent efficacy testing to submit for EPA approval. The repellent is sprayed to engine wiring/ engine compartment of v... View More
Automotive Clutch Facing Lining
Authorized Automotive Laboratory needed for testing of Clutch Facing Lining products, View More
Volkswagon Automotive Electrical Load Testing
Automotive Laboratory needed for automotive electronics following VW80000 standard Automotive Standards for Electrical Load testing. View More
Automotive Parts Wearing Testing
Automotive Laboratory needed for wearing testing on automotive parts such as break pad, break shoes, clutch facing lining,
View More
SAE and DOT Tail Light Assembly Testing
Automotive Laboratory needed for SAE and DOT Testing of a clear lens that covers a tail light assembly and needs to be DOT compliant for GM to lice... View More
Automotive Laboratory needed for design defect testing of the Clutch and Gear system in AMT (Automatic Manual Transmission) Vehicle.
View More
MIL-STD-810-Solar Radiation Testing
Heavy Duty Vehicle Manufacturer needs Laboratory for MIL-STD-810-Solar Radiation Testing. View More
Automotive Parts Manufacturer needs automotive laboratory for SAE testing of a couple of different hoses to hoses for SAE J2064 norm Refrigerant Aut... View More
Automotive Laboratory needed for crush can testing of automobile to determine stresses/strain. View More
JIS Automotive Moisture, Rain and Spray Testing
Automotive Laboratory needed for JIS environmental simulation testing of automotive parts to JIS D 0203 JIS D 0203: Method of moisture, rain and spray... View More
Automotive Laboratory needed for SAE testing of truck air dryer as per SAE J2383 Air Dryer Installation Procedure testing procedure. View More
Electrical Laboratory needed for SAE Certification testing to certify telematics products to SAE J1113 Electromagnetic Compatibility Measurement Proce... View More
Automotive Laboratory needed for VW PV testing according to VW PV 1303 Lightfastness/Colorfastness/High Temperature Light Exposure View More
Automotive GMW Polyethylene Foam Testing
Accredited Automotive Laboratory needed for GMW testing of polyethylene cross linked foam used in automotives to GMW 15063 Polyolefin Foams for Genera... View More
Auto Parts Manufacturer needs Automotive Laboratory for DOT Testing of windshields View More
Manufacturer needs Automotive Laboratory for SAI testing of axels used on semi-trailers. View More
Automotive Laboratory needed for SAE performance testing for fuel systems with Nylon air and fuel vapour lines to SAE J2045 Performance Requirements f... View More
Cleanliness of Oil and Coolant Lines
Automotive Laboratory needed for cleanliness testing of oil and coolant lines for engines as per VDA19 specifications. View More
Automotive Laboratory needed for GMW Testing of Vehicle Interior Materials to GMW16853 COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR... View More
URGENT Automotive Laboratory needed for SAE testing service of a new additive for gasoline engine according to standard SAE-1321 using gasoline as bas... View More
Automotive Laboratory needed for SAE life cycle testing of plastic fuel line connectors for the automotive industry according to SAE J2044 Quick Conne... View More
Electrical laboratory needed for SAE charge accumulation and dissipation testing according to SAE J1645, Fuel Systems and Components - Electrostatic C... View More
Ford Automotive Air Conditioning Condenser
Automotive Laboratory needed for Air Conditioning (AC) condenser testing to Ford OEM specification (ES6L2A-19710-AA, rev K)that will be provided. 4 te... View More
Automotive Manufacturer requires a Laboratory to complete the following Testing:
* Resistance to Seam Wear
* Two different Materials to be used for ... View More
Failure Analysis of Automotive Part
Industrial Forensics Laboratory needed for failure analysis testing on automotive part for water contamination. Water is getting past the seals in the... View More
Jaquar Automotive Specification Testing
Large Manufacturer needs Performance Laboratory needed for automotive components testing: resistance to seam wear on Leather knob L663 to Jaquar Spec... View More
Automotive Laboratory needed for BMW Standards testing to BMW PR 241 glass roofs
BMW PR 263 windshields View More
AUTOMOTIVE COMPONENTS ROHS EVALUATION
LARGE AUTOMOTIVE COMPANY NEEDS THIRD-PARTY LABORATORY FOR ROHS TESTING FOR AN ARRAY OF DIFFERENT AUTOMOTIVE COMPONENTS. View More
Large Corporation needed for VOC testing of cloth adhesive tape using Toyota Method TSM0508G or equivalent.
View More
Automotive powder coating Testing
Automotive Industrial Laboratory needed for physical testing of powder coated metal according Ford WSS-M2P190-A
Interior painted part of handbrake in... View More
Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More
Automotive Laboratory needed for the following ASTM Testing on a 60x40x25 Shipping Case:
Hazard Type ASTM D4169, DC 13 Test ... View More
Physical Laboratory needed for joint testing for a car canopy space frame that is made using new joining method. Testing to be similiar to the type of... View More
OSHA Approved Laboratory needed for compression rating for an engine stand. View More
LONG-TERM TESTING US Automotive Laboratory needed for vendor supplier confirmation cleaning testing of parts used in pumps and turbines to ensure part... View More
Lighting Manufacturer needs Laboratory for SAE candela measurements testing to SAE J845 Optical Warning Devices for Authorized Emergency, Maintenance... View More
Automotive Laboratory needed for electrical testing and possible development of a product that connect to a van sliding door and when the door is clos... View More
Large Manufacturer needs either ISO 17025 or NADCAP or Rolls-Royce Approved Laboratory for ASTM corrosion testing of two type of organic solvents agai... View More
Oil Analytical Chemistry Laboratory needed for ASTM Testing of ethanol to ASTM D7347 Standard Test Method for Determination of Olefin Content in Denat... View More
PRODUCT DEVELOPMENT Consumer Products Laboratory needed for formulation of liquid soap product for cleaning hands from grease and motor oil. View More
LONG-TERM TESTING US Company needs Polymer Laboratory with Erichsen 430P tester to test the scratch resistance of automotive molded plaques per the Vo... View More
Large Technology Company needs Automotive Laboratory for Cleanliness Testing To VDA and ISO Standards: VDA 19 Inspection of Technical Cleanliness - ... View More
URGENT 3rd-party Laboratory to perform automotive SAE J2064 hose assembly testing (permeability and/or coupling integrity tests) using 1234yf refriger... View More
ISO 17025 Automotive Laboratory needed for interlaboratory comparisons according to ISO 16232 Road vehicles -- Cleanliness of components of fluid circ... View More
Materials Laboratory needed for fire testing of automotive nylon fuel lines View More
Automotive Laboratory needed for safety, particulate emission and so2 and no2 testing of a device used in fuel tank of any vehicle or any equipment th... View More
Automotive Laboratory needed for SAE fuel filter performance testing per SAE1985/SAEJ905, Fuel Filter Test Methods View More
Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seatin... View More
Manufacturer needs Mechanical Laboratory for durability testing of DC starter motors (4-7 kW). At nominal torque load, measure current draw and speed.... View More
Large Manufacturer needs Laboratory for SAE testing of fuel gasket material tested per SAE J2659 to see if it qualifies as a low permeation material p... View More
Automotive Laboratory needed for emissions and crash testing of hybrid and electric car. Other testing maybe required as well. View More
Automotive Laboratory needed for ISO passenger car alloy wheels testing to the following ISO Standards:
- Radial Fatigue test ISO 3006/2005
- Cornin... View More
Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static... View More
Automotive Laboratory needed for Toyota TSF0900G 6.2.13 Air Permeability testing to find the air flow rate at 124.5 Pa pressure and report it in L/cm²... View More
Automotive Laboratory needed for SAE emergency vehicle siren testing to SAE J1849 Latest Revision
Emergency Vehicle Sirens (STABILIZED Oct 2012), ?Su... View More
Automotive Laboratory needed for determining a device's performance on a Ford F150 vehicle. View More
Automotive company needs materials laboratory for testing textile mats according :-GS 93026-1-PR 380.4-TL 2754531.6 View More
Product Design Company needs Automotive Laboratory for conducting an environmental simulation study on a custom vehicle cover prototype. Study involv... View More
Large Manufacturer need Automotive Laboratory for FMVSS Testing of Step Van to FMVSS 124.Accelerator Control Systems View More
Automotive Laboratory needed for Ford WSS-M99P2222-D1 and Chinese GBT ELV 30512-2014standard testing of spacer fabrics with various thickness includi... View More
Automotive laboratory needed for nut dropping Test (TSL 3618G according to TSH 1558G) View More
Chemistry consultant needed for technical support and formulation development of consumer goods products that fall into the automotive and household ... View More
Large corporation needs automotive laboratory to evaluate the assembly external sunroofs. View More
Electrical laboratory needed for SAE charge accumulation and dissipation testing for rubber hose with flowing fuel substitute fluid according to SAE16... View More
ISO/IEC 17025 Automotive laboratory needed for resin testing to Mercedes Standard DBL 7384:2015: Supply Specification Coating of plastic parts in vehi... View More
Automotive laboratory needed for ASTM testing of cooling system additives to ASTM D3147-06(2013) Standard Test Method for Testing Stop-Leak Additives... View More
Classic car importer needs automotive laboratory for mechanical testing of brake and gaskets.
View More
Automotive laboratory needed for SAE J2297 or SAEJ2911 specification testing Fluorescent refrigerant leak detection for dyes. View More
URGENT Automotive laboratory needed for burst and ozone testing per SAE j2064 and ASTM D380 on 4 different automotive a/c hose and tube assembly, 2 sp... View More
Accredited automotive laboratory needed for ISO mechanical testing of spark plugs to ISO 11565 - Road vehicles -- Spark-plugs -- Test methods and requ... View More
Automotive laboratory needed to test the performance of brushless motor by comparing the mechanical power output of the machine with the electrical in... View More
Laboratory needed for FMVSS and ASTM burn resistance testing of safety sheet vinyl flooring in accordance with FMVSS 302 and/or ASTM D5132-04 . The F... View More
LONG-TERM TESTING Polymer laboratory needed for viscosity testing and CT Scanning of automotive molded parts. View More
Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
f... View More
LONG-TERM TESTING Materials laboratories needed for proficiency testing for inter-laboratory comparisons for method validation (and) accreditation of ... View More
Automotive laboratory needed for a chemical compatibility verification procedure to ASHRAE 97 standard, Sealed Glass Tube Method to Test the Chemical ... View More
Automotive mechanical laboratory needed for SAE burst and ozone testing of heavy duty machinery a/c hose and tube assemblies per SAE 2064,Refrigerant ... View More
Automotive laboratory needed for ISO conformance testing of 3 spark cables according the ISO 3808, Road vehicles -- Unscreened high-voltage ignition c... View More
AUTOMOTIVE LABORATORY NEEDED FOR VOV EMISSIONS TESTING TO GMW16853 COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR MATERIALS AND PARTS... View More
Large automotive company needs materials laboratory for textile air permeability testing. View More
Independent laboratory needed for testing automotive seals to Nissan Engineering Standard: [O] Jeans rubbing durability test 76921NDS10 [8]. This incl... View More
Large automotive parts company needs materials laboratory for product testing for the presence of asbestos View More
Automotive laboratory needed for testing of a new automotive part to Toyota Motor Corporation Standards. Testing to include: coefficient of surface fr... View More
Car exporter needs automotive laboratory for NATA certification of cars for asbestos prior to export. View More
Electrical laboratory needed for UL certification testing of centrifuges with two motors prior to shipment to Canada. View More
Automotive materials laboratory needed for SAE thermal insulation testing to SAE J 2302 Thermal Effectiveness of Sleeve Insulation. View More
Laboratory needed for EPA fuel efficiency certification testing of truck and large engine as well as emissions testing with use of a liquid organic en... View More
Automotive laboratory needed for GMW sediment testing as per GMW 16037 Test Method to Quantify Cleanliness of Powertrain Components View More
Automotive laboratory needed for SAE electrochemical resistance testing of coolant hose and materials. As per SAE J1684 Method #1, referred to as a Br... View More
Automotive laboratory needed for complete cable qualification program testing in accordance with Renault 36-05-009, Single-core automotive cables. View More
URGENT Large corporation needs automotive laboratory for UN testing of coating tint used on windscreen/windshield to ISO 3537 Headform testing for aut... View More
Laboratory needed for SAE stability testing of fluorescent dyes as per SAE J2297, Ultraviolet Leak Detection: Stability and Compatibility Criteria of ... View More
Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of mo... View More
Automotive laboratory needed for SAE functional and validation testing of automotive quick couplings as per SAE J2044 , Quick Connect Coupling Specifi... View More
Automotive laboratory needed for several tests on plastics oil pan auto parts including oil pan assembly fatigue resistance (vibration test), M8 bushi... View More
Automotive laboratory needed for determining the chemical makeup of a fuel harness to for soy based components in an automotive part. View More
Materials laboratory needed for thermal conductivity testing of an automotive thermal cover as per Ford specifications WSSM9932B (3.9.1): Thermal Con... View More
ISO 17025 accredited automotive materials laboratory needed for solar / UV simulation testing of automotive laminated glass to DIN 75220, Z OUT condit... View More
Automotive laboratory needed for fatigue testing of automotive components under cycles Thermal. Temperature range: -40 ° C to +180 ° C Humidity range:... View More
Automotive laboratory needed for four point ball bearing testing of new race car ball bearing for life of bearing, coefficient of friction, alloy of m... View More
Accredited automotive laboratory needed for SAE testing of alarms to SAE J-994: Backup Alarm
View More
Automotive parts manufacturers needs laboratory for accelerated againg of test oil sa including GC-MS headspace and GC-MS direct injection (after dilu... View More
ISO mechanical automotive laboratory needed for IEC 17067 and SAE J 1401 tests of hydraulic brake hoses
View More
Automotive laboratory needed for SAE testing of refrigerant hose assemblies to SAE J2064 standard (Refrigerant Automotive Air-Conditioned Hose) View More
Automotive parts company needs physical materials laboratory for ASTM flammability testing to ASTM D6668 - 01(2016) Standard Test Method for Discrimin... View More
LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers ... View More
Automotive laboratory needed for VW-Audi plastics melamine resin foam testing for conformance to VW Audi requirements. View More
Internationally recognized laboratories needed for benzene comparison study of fuel efficiency in engines A-80 & A-92 of gasoline imported from differ... View More
Automotive safety laboratory needed for simulated environmental testing (dust, moisture, vibration, etc.) as well as audible testing of a backup alarm... View More
Automotive laboratory needed for mechanical testing to General Motors A/C hose pressure standards. View More
Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements View More
Automotive Parts Company needs VW validated materials laboratory for VW Testing to VW 50180 odor test View More
Automotive laboratory needed for a brake fluid stroking test according to FMVSS n116 para. 6.13 on 2 complete disc brake systems and 2 complete drum b... View More
Large automotive company needs environmental simulation laboratory for DIN vehicle-level UV solar simulation testing according to DIN 75-220.Aging of ... View More
Automotive laboratory needed for SAE J1455 (electronic) compliance testing including EMC on two automotive air-pressure gauges. View More
Physical laboratory needed for DIN Testing of automotive parts to 5.9 Solar Radiation Test as per DIN 75220, D-OUT-F
Test duration 1 cycle = 240 hrs... View More
LONG-TERM TESTING Laboratory needed for ongoing and yearly proof testing of various hose assemblies to IAW SAE J2064 using an inert gas and cleanlines... View More
Automotive performance laboratory needed for fatigue testing of universal driveshafts with the following requirements:
0-3400 ft*lbs @ 10,000 cycle... View More
Automotive testing laboratory needed for VDA 19.1 cleanliness testing of a product. Quote needed. View More
Automotive laboratory needed for ASTM D5500 (Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake ... View More
Automotive laboratory needed for SAE J905 Sections 3 through 7 (Resistance to flow, contamination collection, release of contamination from filter int... View More
Automotive laboratory needed for LED light intensity and color testing on a steering wheel. View More
Motor oil laboratory needed for JASO T903 (DFI, STI, etc.) testing of automotive oil.
View More
LARGE AUTOMOTIVE COMPANY needed for sealed house evaporative determination (SHED) testing for California air resources board (CARB) certification test... View More
Automotive textiles company needs materials laboratory needed for SAE accelerated weathering testing to SAE J2527 testing using Q-Sun Xenon Test Cham... View More
Automotive laboratory needed for DOT mechanical testing of air brake hose to DOT FMVSS 106 View More
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to ... View More
Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehic... View More
URGENT. Automotive paint testing laboratory need for Amtec car wash testing per ISO 20566. View More
Automotive laboratory needed for UNECE vehicle safety testing automotive anti-lock brakes according to ECE R13H.
View More
Engineering laboratory needed for testing of automotive sensors according to IPX9K of (24) Automotive Sensors approx. 25mm OD X 45 mm long. A slight v... View More
Power company needs Laboratory for engine ash deposits testing taken from GE Jenbacher Gas engines.
View More
Automotive laboratory needed for VW Testing toVTL 956 (VW Test Requirements for reflectors View More
Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm... View More
ISO or A2LA Automotive Laboratory needed for SAE testing of brake lines. Testing per SAE J1047, Tubing - Motor Vehicle Brake System Hydraulic View More
Electrical Laboratory needed for Ingress Protection IP69K testing for an electric motor for food industry View More
Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in... View More
Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product t... View More
Automotive laboratory needed for VW Standard testing to measure colour and reflectivity in accordance to VW 50190, Components of the Vehicle Interior ... View More
Automotive laboratory: needed for Volkswagon weather testing of polyethylene PE foam per VW 50185It View More
Automotive testing for back up lighting: SAE J593 View More
Electrical Laboratory needed for conformance testing of automotive spark plug cables:
ISO 3808 (or SAE J2031) for Spark Plug Cable. ISO 3808 or SE... View More
ISO 17025 and WHO certified laboratory needed for DIN Testing of automotive components 432H (high temperature relay) in accordance to DIN 75220, aging... View More
Electrical laboratory needed for SAE Testing to SAE J1292, Automobile and Motor Coach Wiring View More
Electrical laboratory needed for DIN Testing of a group of sensors as per DIN 40050-9 (IPX9K), Road vehicles; degrees of protection (IP-code); protect... View More
Laboratory needed for testing performance oriented products used in Automotive,personal care,agro,paint industries View More
Automotive laboratory needed for corrosion testing on a step for a Chrylser van Cyclic corrosion PER SAE J2334 - 60 cycles View More
Large automotive supplier needs materials laboratory for physical testing on painted plastic such as the DuPont Impact test and Traverse Abrasion plu... View More
USA Materials Laboratory needed for ANSI Testing for light transmission (A light) to ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicl... View More
LONG-TERM TESTING Oil Laboratory needed for long-standing motor analysis for metal and physical properties on motor oil performed every 30,000 miles.... View More
Packaging Laboratory needed for vibration testing an automotive pallet load to ensure returnable packaging will hold up
pack ships for automotive ma... View More
Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break ... View More
Automotive manufacturer needs Materials Laboratory for DIN Testing:Torsion pendulum test to DIN EN ISO 6721-2A, Plastics -- Determination of dynamic m... View More
Automotive Laboratory needed for physical testing to Volvo STD 423-0036, Impact strength, View More
Materials Laboratory needed for SAE Testing to SAE J 883 Test Method for Determining dimension atability of Automotive textiles materials View More
Large oil company needs Materials Laboratory for ASTM Testing of Polyurea Electric Motor Grease that requires the ASTM D3336, High Temperature Bearin... View More
INDIA PHYSICAL LABORATORY NEEDD FOR AUTOMOTIVE SAFETY GLOVE TESTING: CUT RESISTANCE TO LEVEL 4 GLOVE (PPE'S) ABRASION RESISTANCE
BLADE CUT RESISTANCE... View More
Automotive Laboratory needed for certification testing of car window module to General Motors and European standards
FMVSS & CMVSS118
Europe - 74/6... View More
Automotive Laboratory needed for SAE Testing: Automotive Vacuum & Hydraulic brake booster durability testing. SAE J1807 Hydraulic Power Assist Brake B... View More
Automotive laboratory needed for automotive transmission testing to specified requeirements at High temperature - automotive transmission
Low tempera... View More
Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and S... View More
Automotive cleaning solutions company needs environmental microbiology laboratory for OECD biodegradability testing on detergent to OECD method OECD ... View More
ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More
Materials laboratory needed for motorbike gloves testing to EN 388 (Abrasion, Blade cut, tear and punchar) EN 420, ( PH, value, Crom VI, and etc). Pl... View More
ILAC Accredited medical device laboratory needed for ISO Testing of dental motors and instruments ISO 14457:2012, Dentistry -- Handpieces and motors View More
ISO 17025 Automotive laboratory needed for all Automotive charger testing such as EMC conformance, vibration, dimensional,
View More
Automotive mechanical laboratory needed for front suspension springs testing for test requirements for Corrosion Key Life Fatigue test (KLT), t.e. Hea... View More
Mechanical Laboratory needed for motor testing of 24 motor assemblies measured for surface roughness (required spec. is Ra 0.4µm max). The surface we... View More
ISO/IEC 17025 Automotive Laboratory needed for General Motors Testing: Test for automotive GM14573, Global Performance Requirements for Labels. View More
Medical Device Laboratory needed for ISO testing of a dental handpiece per ISO 14457, Dentistry -- Handpieces and motors View More
Automotive company needs laboratory for deformulation and development of a liquid Leather Protector for cars to manufacture it for export. View More
USA Volkswaren approved automotive labs needed to test Al wheels for Cornering fatigue testing View More
AUtomotive Parts company needs Acoustics Laboratory in Saudi Arabia to perform sound testing of York centrifugal chiller View More
Asia automotive laboratory needed for wiring harness Crimping validation, etc., laboratory needed to conduct tests according to General Motors standar... View More
AUtomotive parts company needs automotive laboratory for General Motors Testing to GMW14609 Corrosion, Simulated 3 g Occupant Load & Downward Strengt... View More
Automotive Laboratory needed to conduct tests according to General Motors standards:
GMW: 3205 - Odor
, 3232-Flammability
, ... View More
Automotive company needs Flammability testing on automotive brake clean aerosol formula View More
USA Automotive laboratory needed for SAE and ASTM Testing: Compression Stress Relaxation Test SAE J2979 + Low Temp Brittleness ASTM D2137 View More
Automotive Laboratory needed for SAE Testing of automotive senders (hall effect transducers) tested to
SAE J1226, Electric Speedometer Specificati... View More
Contract Laboratory needed for testing to EN1621-2 Level 2, Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or... View More
Physical Laboratory needed for SAE testing: solar radiation test as per SAE J575-2010, Test for Motor Vehicle Lighting Devices and Components View More
LONG-TERM Eastern Europe laboratory needed for long-term testing of injection, painting and chrome plating of plastic parts for automotive industry t... View More
URGENT Automotive Laboratory needed to Evaluate automotive products as per Toyota standard.These tests are Characteristics Test, Heat Resistance Test,... View More
Automotive laboratory needed for validation testing of VW 50180 automotive waddingfor compliance to PV3015, PV3341, PV3900, PV3925, PV3942 View More
USA automotive laboratory needed for SAE J2064 hose validation to test to to SAE J2064-2015 to do an initial validation of a new line of air condition... View More
Testing laboratory able to perform: Resistance to frictions of pipes and protective sleeves of automotive fuel systems View More
Mechanical Laboratory needed for Testing of automotive brake lines to FMVSS 106, primarily whip testing. View More
Oil Laboratory needed for Sequence VIB motor oil testing
Sequence VIII View More
Oil Laboratory needed for Octane testing of fuel for motorcycle shop View More
LONG-TERM TESTING Company performing regular road tests for automotive OEM needs Oil Laboratory for regular fuel analysis for ?Diesel? and ?Premium G... View More
USA Materials laboratory needed for automotive standards testing of 3 different film materials on an automotive standard (MS 373- 12). Gasoline Non-le... View More
USA laboratory needed for SAE Testing of Compressed air dryer to SAE specification J2384, desiccant Air Dryers used in vehicles with compressed air sy... View More
Automotive Laboratory needed for General Motors Standard Testing as per
GMW 3172_2008
Power Temperature Cycle test ( 9.4.3)
Water Test (9.5.2)
... View More
Automotive Laboratory needed for IEC Testing of dashboard Cluster as per IEC 60068-2-5, Method-B, as per JCB Test standard STD0140 issue-4. View More
ON-GOING: Automotive Laboratory needed for SAE Testing to SAE J2384 on Desiccant Air dryers used in vehicles. SAE J2384 is a test procedures for desic... View More
Mechanical Laboratory needed to provide estimation for GMW-3155 automotive testing to General Motors Standards. View More
Automotive Laboratory needed for Ford alternator pulley decoupler test specification which describes the environmental and durability requirements for... View More
Mechanical Laboratory needed for product validation testing for an automotive accessory drive/alternator pulley system. I have the full product valida... View More
NABL India environmental laboratory needed for environmental Testing of Automotive components View More
Electrical Laboratory needed for evaluation of electrical system of X-Ray Inspection Vault The vault consist of: · 4 walls and a ceiling · 2 motor dr... View More
USA ISO laboratory needed for ISO Particulate Cleanliness testing of electronic component to ISO16232-10 Road vehicles -- Cleanliness of components o... View More
South Africa mechanical laboratory needed for automotive lamp testing. View More
Laboratorio necesario para el motor de ciclo rueda prueba View More
URGENT: Materials laboratory needed for adhesive testing to General Motors Standards: test an adhesive to GMW 16443 asap please and what the cost woul... View More
URGENT: Automotive Laboratory needed for SAE Testing of automotive sleeving samples to be tested to Standard SAE J2302. This is required as soon as p... View More
Asia automotive laboratory needed for seat belt testing Test Product : Seatbelt Webbing (only webbing .)
FMVSS 209? Page 26-27
a... View More
Canada and USA ISO or AALAC certification laboratory needed for testing and certification of automotive parts (e.g. AMECA or any other certification c... View More
Automotive Laboratory needed for LED lighting testing for a RV clearance light, View More
South America or USA Mechanical Laboratory needed for Motor Vehnical Parts Testing to ISO and General Motors Standards: Bumper Product Validation tes... View More
SOuth America or US Mechanical Laboratory needed for ISO and General Motors Testing of Air filter ADV General Motors Validations to ISO 5011GM Procedu... View More
Automotive Manufacturer needs Central Asia Automotive / Mechanical Laboratory for ASTM Testing and other testing:
ASTM D3012 or ISO 4577 - Oxidatio... View More
Europe mechanical and physical laboratory needed for automotive parts testing: ball joints testing for stress resistance, dust seal, tests in environ... View More
USA Mechanical Laboratory needed for automotive parts testing: Ford Spec testing with tube and hose assemblies to ESDS7H-19b591-AA View More
Large automotive company needs laboratory for UL Testing: luminance test performed on a tritium self-luminous exit sign to determine if it meets the N... View More
USA Medical Device Laboratory needed for dental sterilization testing to ISO 14457 : 2012 Dentistry ? Handpieces and motors (including Section 5.10 Re... View More
Environmental simulation laboratory needed with Drive-in environmental chamber needed to test vehicles, -30 to +50C View More
Manufacturer needs laboratory for automotive interior emissions testing to
General Motors specifications to GMW16853 (overall interior emissions tes... View More
Europe Automotive Textile laboratory needed for automotive textile testing as per Renault / Toyota / Ford standards View More
USA Textiles Laboratory needed for ASTM Testing of 16 samples
product is nonwoven textile material
required testing is automotive interior material ... View More
Semiconductor company needs electrical laboratory for EMC testing scope as per automotive standards at your facility. 2. Please provide the process an... View More
Texas Lab needed for tribology testing for testing of a bulk oil tank that contains Rotella 15w-30 motor oil. Sample was pulled and there is a foreig... View More
Large Automotive Manufacturer needs USA Materials Laboratory for silicone material testing: 0.625" x 1.25" Rectangle Extrusion 30-40 Duro Black Sil... View More
East Coast USA ASTM or ISTA certified Laboratory needed for Automotove Packaging Testing: ASTM D4169 shock and vibration as well as compression testin... View More
India Materials Laboratory needed for ISO Surface cleanliness to ISO 8296-2003 . oil freeness test by ink test/ ARCO TEST on automotive component af... View More
ASAP: Automotive Car Parts Manufacturer moving to new manufacturing plant needs for automotive car parts testing of exterior plastic parts like Front... View More
USA MATERIALS LABORATORY NEEDED FOR GENERAL MOTORS SEALING TESTING TO GMW3155 - GMW3149/GMW3152 View More
Texas Laboratory needed for Lubricity Testing for O&G Pipe on Pipes. We have a customer who is wanting us to run an independent lubricity test on our ... View More
Mexico mechanical laboratory needed for automotive specification testing of painted automotive exterior plastic handles testing to VW TL 211 2014-07 View More
Oil Laboratory needed for motor oil analysis per the list below. Ø Determination of flash point. Ø Determination of kinematic viscosity and dynamic v... View More
Automotive Parts manufacturer of brake pads and brake linings for cars and trucks needs India, USA or UK Materials Laboratory for failure analysis, q... View More
East Coast Automotive Laboratory needed for automobile headlight testing: headlamps for automobiles and we are having marks show up on the plastic le... View More
Supplier of plastic parts for the automotive industry needs ISO automotive laboratory for GMW testing and ISO testing. Company is developing a new pro... View More
California automotive laboratory needed for automotive compliance testing to GMW 14650 (Performance Requirements for exterior Plastic Part). 2 Parts, ... View More
Materials Laboratory needed for Aging Testing for automotive rubber hose View More
Automotive Consumer Products Laboratory needed for automotive cleaning sponge testing on automobiles. On the Car paint, windshields, headlights, metal... View More
Ontario Canada A2LA or ILAC Materials Laboratory needed for ASTM Testing: Material testing of automotive fasteners. Hardness testing rockwell c and o... View More
Materials Product Safety Laboratory needed forANSI Safety Testing to ANSI Z26.1 standard. 1996 Safety Glazing Material for use anywhere in motor vehic... View More
Automotive manufacturer needs India mechanical laboratory for Car Cigarette Lighter testing View More
Automotive Laboratory needed for automotive parts testing. Brake testing to U.S. Dept. of Transportation, National Highway Traffic Safety Administrati... View More
Automotive Laboratory needed for brake hose tesing to GMW3056 - 3.1.2.4 Hot Plate
36 Samples total (18 Procedure A and 18 Procedure B)
Impulse and B... View More
Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushl... View More
USA Mechanical Laboratory needed for wheel hub testing of Automotive wheel hubs (5-10 samples), drive shafts (5-10 sample). View More
Middle East, Asia Mechanical Laboratory needed for automotive parts testing to 6311:2005 -MOTOR VEHICLES METHODS OF TESTING BRAKE LININGS - P... View More
India Automotive Laboratory needed for automotive Part & Testing:
1. Diesel fuel and petrol filters for IC engines - Filtration efficiency using par... View More
Norway mechanical laboratory needed for mechanical testing of automotive parts. Tests to be performed on interior parts for the automotive industry. View More
Large automotive manufacturer needs Brazil packaging laboratory for ISTA Testing and ASTM Testing testing for steel returnable shipping containers in ... View More
Materials Laboratory needed for FEDERAL
MOTOR VEHICLE SAFETY STANDARDS AND REGULATIONS FMV Flammability Testing to FMVVSS302, View More
Automotive Laboratory needed for mechanical testing: Door Slam Testing System: Specifications- Robot(outer slam) & Pneumatic(inner slam)- 4 vehicle av... View More
Electronics manufacturer needs electrical laboratory for ISO Testing: ISO contamination Testing according ISO 16232 Road vehicles -- Cleanliness of co... View More
Automotive mechanical laboratory needed for vehicle testing services include - starting system - brake testing - speedometer testing - emission testin... View More
Automotive company needs Southeast Michigan physical laboratory for Martindale abrasion testing View More
North Carolina Mechanical Laboratory needed for Automobile Packaging testing: Compression testing and incline testing on boxes filled with automotive ... View More
India NABL accredited laboratory needed for motorcycle helmet testing as per the applicable International standard View More
Asia mechanical laboratory needed for plastic Testing of automotive painted plastic parts to GMW and EDS standards for painted plastic parts. View More
USA Oil Laboratory needed for R &D Testing: Research on Automotive Transmission Fluid ( ATF and any kind of ATF)If we put into the engine ( transmissi... View More
Automotive materials laboratory needed for ASTM Testing to astm d 1004, Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sh... View More
USA Mechanical Laboratory needed for SAE Testing of refrigerant automotive air-conditioned hose under SAE J2064-2005. If any lab can do, pls contact u... View More
Mechanical laboratory needed for SAE Testing of refrigerant automotive air-conditioned hose under SAE J2064-2005
View More
Asia, India or USA Automotive Laboratory needed for vehicle parts testing. Testing of Vehicle spare parts;
mainly for Brake Pads, Filters (Air, Fuel ... View More
ISO automotive Laboratory needed for automotive wiper motor assembly durability testing involving a limited number of samples and up to 400,000 cycles... View More
Taiwan or China ANSI laboratory needed for ANSI Testing of MIC and MIT motorcycle goggles View More
Europe Mechanical Laboratory needed for Mechanical Testing to ISO 16750, oad vehicles - environmental conditions and testing for electrical and electr... View More
South Korea or India mechanical laboratory needed for automotive filter testing View More
USA Mechanical Laboratory needed for SAE Testing of 7-Way trailer connector certified to SAE International Standard SAE J 2863 - Automotive Trailer To... View More
Automotive Laboratory needed for Emmissions Testing to VW 50180 includes:
- Condensable constituents according to Test Specification PV 3015 (FOGGING... View More
electrical Mechanical Laboratory needed for Abrasion testing: EN60068-2-70 (e.g. ABREX)abrasion test of totally four painted automotive samples (100 0... View More
DOT Transportation Packaging Laboratory needed for DOT Testing: DOT, Title 49 CFR
Packaging - motor oil - bag in a box
11 sample packs View More
US Electrical Laboratory needed for electrical testing, mechanical testing and chemical testing for 60V and 600V cables to ISO 6722-1 Road vehicles --... View More
Necesito saber si existe algun laboratorio certificado en la norma iso 5011:2000, para pruebas a elementos filtrantes para aire, en la pruba de ?LIMPI... View More
Large Automotive Company needs India Physical laboratory for Environmental Conditions and Test Procedures for Airborne Equipment Testing, Icing testin... View More
Canada materials laboratory needed for mechanical testing, physical testing, consumer product testing for Automotive Parts Importer/Wholesaler and wou... View More
Canada Mechanical Laboratory needed for ISO Testing to ISO 16232, Cleanliness of Components of Fluid Circuits in Road Vehicles, 50 parts of 3.7 g each View More
Mechanical Laboratory needed for plastics automotive testing to test painted plastic parts test for VW TL 211 Specification. View More
Large Automotive manufacturer needs mechanical laboratory for evaluation of denting, oil canning
approximately 100 locations on vehicle, 1 vehicle e... View More
India Automotive Mechanical Laboratory needed for enginer testing to determin high octane content value for ENGINE TESTING. SO WE NEED CHENNAI HIGH OC... View More
Department of Transportation DOT qualified triangles per Federal Motor Vehicle Safety Standards and Regulations FMVSS 125, Warning Signals.
View More
USA Oil Laboratory needed for ASTM Testing, Octane testing to ASTM D2700, Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel View More
Asia Mechanical Laboratory needed for EPA certification testing on a UTV/Buggy manufactured in China. The UTV has a Liquid cooled?4stroke Upstanding t... View More
Mechanical Laboratory needed for automotive heat exchanger testing. 1. Pressure Cycle Durability Conditions :The Test shall be performed on condenser ... View More
Large Electronics Mfg needs West Coast USA electrical laboratory for qualification testing of electrical brushless motor connector contacts to separat... View More
Mechanical laboratory needed for abrasion testing by using ABREX equipment. Test item : IEC60068-2-70 Test component : Knob of Automotive interior pa... View More
India mechanical laboratory needed for aerospace testing: Hydraulic System (Aircraft landing gear actuation systems)
HYDRAULIC SYSTEM: (Landing Gear ... View More
Texas Materials Laboratory needed for ASTM Testing to ASTM E 681: Lower explosive limit and Upper explosive limit of base motor oil View More
Automotive Laboratory needed for A2LA Testing: Test Nissan Intake Manifold per Nissan specification 14001NDS01-2011 View More
India oil and petroleum research laboratory needed for IP Testing or ASTM Testing: Octane Testing for octane number (RON) and Motor octane number (MO... View More
USA ISO Materials Laboratory needed for Motorcycle tires testing: rubber testing. View More
USA ISO electrical and mechanical laboratory needed for Automobile and motorcycle Spark Plugs testing. View More
TouchScreen Tablet Mounting Device manufacturer needs physical consumer product safety laboratory for automotive simulation testing: Front/Rear Impac... View More
China automotive, mechanical laboratory needed for ECE Testing, Motorcycle Testing to ECE R39,R40,R41,R78 Speedometer, emissions,noise, brakes on moto... View More
Canada or USA Electrical Laboratory needed for IEEE Testing : electrical tests of 600VAC 3-phase harmonic filtering product-line (up to 10 samples), r... View More
India Mechanical Laboratory needed for DIN Testing Test Details: Specification - Equivalent to DIN 50018 The test duration of Saturated SO2 test is 3-... View More
India Global Certified Laboratory needed for Electronics product Testing - Automotive" View More
USA Materials Laboratory needed for ASTM Testing adn FDA Testing of bioplastic materials : 1.Bio-content analysis - ASTM D6866 2.Food Packaging Conta... View More
India Materials Laboratory needed for ASTM Testing: Melting Temperature, degradation mechanism, calculating molecular Weight by gel permeation chromat... View More
Automotive laboratory or mechanical laboratroy needed with a "spinning torsional system" for engine simulation testing. View More
Canada Electrical Laboratory needed for UL Testing and CSA Testing of Central vacuum units, 5 SKU's for North America.
UL approved motor. View More
Electrical Lobaratory needed for capacitor testing a 20kvar power factor correction capacitor device under a controlled condition using motor on distr... View More
US Analytical Chemistry Laboratory needed for Competitive brand analysis (reverse engineering) to determine ingredients of liquid material used to cle... View More
USA Mechanical Automotive Laboratory needed for operating simulation testing on an auto engine belt tensioner (specifically a '01-'05 Honda Civic timi... View More
Large Automotive Manufacturer needs India plastics laboratory for ASTM Testing ASTM D 955, % Shrinkage test for Plastics In this test, plastics moldin... View More
California Mechanical Laboratory needed for automotive fuel pump testing to MIL-PRF-62678B (ASTMD471, ASTMG21 and ASTMB117) View More
TEXTILES LABORATORY NEEDED FOR SAFETY TESTING TO FEDERAL MOTOR VEHICLE SAFETY STANDARD 302 TEST ON UPHOLSTERY VINYL. FMVSS 302 10 SAMPLES TO BE TESTED... View More
USA ELectrical laboratory needed for EEC testing of electric micropumps for automotive use as per standard EEC 94/68/EC View More
West Coast USA consumer product safety laboratory needed for CPSC Testing of protective roll bar and seat belt system for ATVS--All Terrain Vehicles. ... View More
Automotive Test for Polyurethane Foam to NES STANDARDS: METHODS OF THERMAL CYCLE TESTING FOR PLASTIC PARTS, METHOD OF TESTING THE SMELL OF INTERIOR P... View More
Europe, North America mechanical laboratory needed for Power supply testing, measurement and power bus simulation for testing powertrain/propulsion, e... View More
Mechanical laboratory needed for automotive testing VW50185 and VW50180 testing standard View More
Large Auto Manufacturer needs A2LA Mechanical Laboratory for Mechanical Testing - Fatigue Tests Automotive Parts as per GMW3172 Standard.
Typical Tes... View More
Large multinational electronics manufacturer needs electrical laboratory for NEMA 3R water type testing, preferably in or near Greater Toronto Area, ... View More
East Coast Electrical Laboratory needed for non-destructive testing of motors. electrical test lab to test, examine and even perform destructive test... View More
Southern California Electronics, Automotive Laboratory needed for testing electronic device that claims to increase MPG and reduce emissions. View More
USA Mechanical Laboratory needed for Automotive dual drive motor controller for an electric motor/generator design validation to GMW3172 spec. View More
Europe mechanical automotive laboratory needed for Analysis of a catalyst (catalytic for exhaust system)
In particular two measures are required, rel... View More
Canada electrical laboratory needed for SAE J2194 Dielectric testing of an automotive 8 Cylinder distributor cap. View More
Europe Electrical Laboratory needed for Electrical Connector Testing of connectors and wiring related to electronic boards in home appliance and autom... View More
Asia Electrical Laboratory needed for IEC Testing: Motor Circuit breakers IEC 60947, IEC 60947-1
2) Contactors IEC 60947-4, IEC 60947-5
3) Relays I... View More
MATERIALS LABORATORY NEEDED FOR NISSAN STANDARD TESTING FOR PAINTED EXTERIOR PLASTIC PARTS FOR THE AUTOMOTIVE INDUSTRY. View More
China Automotive Laboratory needed for EEC, Homologation test for diesel engines and OBD + NOX tests View More
USA A2LA ISO Automotives Laboratory needed for Radio testing using CAN ISO16845 test method. ISO 16845 provides the methodology and abstract test suit... View More
USA EPA Environmental Laboratory needed for testing automotive exhaust samples as per EPA Method TO-11A, number unknown. View More
Automotive rear view mirrors manufacturer needs Materials Laboratory to perform roughness testing on the ground edge of the mirror. Mirrors range in ... View More
Midwest USA ASTM JIS Automotive Laboratory needed for testing chrome plated plastic a parts on Ford WSB-M1P83 B2, Chrysler PS-8810, Nissan M4063 [2001... View More
India Metallurgical Laboratory needed for case hardening automotive part testing. View More
USA EPA Analytical Chemistry Laboratory needed for VOC emission testing and providing certificate of results. Our product is a mixture of chemicals su... View More
China Automotive Materials Laboratory needed for testing Automotive Part - Headlamp Norm Fiat 9.93334 View More
Electrical Laboratory needed for electrical environment testing of an industrial control device tested to demonstrate robust operation in a noisy elec... View More
Ohio Materials Laboratory needed for ANSI Testing: ANSI 26.1 test groups 4, 5, & 12 under "rigid plastics" for glazed materials used in the automotive... View More
India Automotive Materials Laboratory needed to test complete automotive exhaust system, catalytic converter etc for hot vibration, hot fatigue, and t... View More
South Carolina ISO Automotive Materials Laboratory needed for testing as per ISO 16232, technical cleanliness of metallic engine parts View More
USA Automotives Laboratory needed to conduct Sound Loss (STL) Pass-Through Evaluation Test on 7 samples of the same A/T Cable Pass through grommet as ... View More
ASTM/SAE Automotives Laboratory needed for the following testing:
-Thermal Conductivity ( ASTM C518, ASTM C177).
-Floor Heat Insulation (Interior a... View More
Singapore Automotive Materials Laboratory needed for performance & emissions testing with biodiesel fuel (EURO IV engine, static & road test). View More
Europe ASTM Mechanical Laboratory needed for testing as per ASTM D 1335 at room temperature and 80°C on tufted carpets for automotive application View More
SAE/ASTM Automotive Materials Laboratory needed for testing automobile interior carpet parts. They are body trim (textile), tailgate trim (textile), f... View More
Large Automotive Safety Equipment Manufacturer needs Southwest USA Materials Laboratory for testing in accordance to ANSI Z359.1 CSA Z259.2.2 CE 360 a... View More
Analytical Chemistry Oil Laboratory needed for the following testing on motor engine oil 20 w 40:
(1) appearance
(2) Color
(3) Density@85deg.... View More
USA ASTM Analytical Chemistry Oil Laboratory needed for Physical Properties Testing -Noack Volatility, HTHS Viscosity, Pour Point, MRV Viscosity for M... View More
Analytical Chemistry Laboratory needed for DL testing automotive fuels to Portuguese Legislation (DL 89/2008). View More
India Automotive Materials Laboratory needed for Analytical, Performance, and Emmission Testing of Fuel additive, On Road and Off Road View More
Automotives Materials/Mechanical Laboratory needed for Mirror System Key Life Test - Lifecycle test with environmental profiles View More
Poland Automotive Products Manufacturer needs Europe Mechanical Laboratory for testing as per STD 423-0036 "Impact strength, falling-weight method" View More
Europe Automotive Materials Laboratory needed to test a painted passenger airbag cover according General motors specification GMW3133 View More
South Africa Automotive Materials Laboratory needed to conduct a fogging test for DIN 75201 according to Method A (Reflectance %) & Method B (Fravimet... View More
Leading manufacturer of Road Speed Limiter (Autograde) Devices for automobiles needs Mechanical/ Materials Automotive Laboratory for the following tes... View More
Global Trading Company from Myanmar needs Automotives Materials Laboratory to test Auto Spare Parts. View More
USA MIL Laboratory required to test one sample of a 15w40 diesel motor oil for Physical (API Spec CJ-4) test & Performance in accordance to MIL-PRF-21... View More
SAUDI ARABIA AUTOMOTIVES TESTING LABORATORY NEEDED TO CONDUCT TESTING FOR KIA NEW MODEL VEHICLES. View More
Mechanical Laboratory needed for dynamic testing of 50mm kingpins in accordance to Australian/New Zealand Standard 4968.3:2003 per Appendix A (Dynamic... View More
Laboratory needed for automotive testing in accordance to VW50185; PV3929; PV3930 View More
ANSI Laboratory needed for testing in accordance to ANSI Z26.1 Automotive Glazing
Plastic Transparent Nylon
2 thicknesses 0.1" to 0.236"
Item 6 te... View More
Electrical Laboratory needed to conduct load test on the following electrical motors details are given below :- 1. Power: 100KW/100KW/35KW. 2. Power: ... View More
Eastern USA Electromechanical Laboratory needed for comparative performance test between six samples of stepper motors; 1.5A/phase; 25 to 50N-cm torqu... View More
USA ANALYTICAL CHEMISTRY LABORATORY NEEDED TO ANALYZE ENGINE OIL.TEST MOTOR OIL FOR CHEMICAL BREAKDOWN & COMPOSITION. ANALYZE FOR POSSIBLE CONTAMINAT... View More
USA NES LABORATORY NEEDED TO TEST ONE STYLE OF AUTOMOTIVE CARPET FOR CONSTRUCTION REQUIREMENTS ONLY - NO COLOR REQUIREMENTS - USING A SPECIFIC TEST ME... View More
Europe MIL Laboratory needed for CS101 CS114 CS115 CS116 and RS103 test according to MIL-STD-461E,
4 inert rocket motor samples. View More
USA MIL Laboratory required to test one sample of a 15w40 diesel motor oil for Physical (API Spec CJ-4) test & Performance in accordance to MIL-PRF-21... View More
USA Automotive Laboratory needed for DIN 75220
D-IN1-T Testing
480 hours
5 samples (1.18" x 2" x .86")switch View More
EPA laboratory to conduct emission tests according to EPA regulations for a motorcycle. Requester a certification company from China. View More
Eastern China Physical Laboratory needed for FMVSS 201Testing for automotive interior parts View More
Large Automotive Mfg needs Russia Physical Laboratory for automotive component testing sunroof and cockpit Operating Noises, Squeaks and rattles carac... View More
ISO Textiles Microbiology Laboratory needed for ASTM Testing, antimicrobial topfinish for antibacterial and antifungal properties for automotive inter... View More
USA or Canada Analytical Chemistry laboratory needed for VOC (volatile organic compound) Testing for automotive interior carpet material
View More
New York Metropolitan Electrical/Product Safety Laboratory needed for testing LED Lightbar for Police and Emergency Response Vehicles. View More
Mechanical Laboratory required for testing:
I- toruqe & U- Toruqe test and we are using these test to detect subtle differences in body Catheter perf... View More
Materials Laboratory required for crumpling test. We are a Colombian company specializing in textile manufacture. Inside our range of products we offe... View More
US Environmental Laboratory required to test both water-based and solvent formulations for biodegradability. In the past we had used a lab in Europe f... View More
Product Safety Laboratory required for testing Costmetic Products for human safety and efficacy testing; synthetic peptides - alone and in concert wi... View More
Analytical Chemistry Laboratory needed for testing samples of plant stem and fruit tissue (tomato) for the presence of motor oil and vegetable oil. View More
Mechanical Laboratory needed for testing automotive water pumps.
View More
Mechanical/Engineering Laboratory required for Life/Reliability Testing. I'm looking for assistance in developing and performing a life test for a hyd... View More
US EPA Product Safety Laboratory required for motorcycle 250CC dirt bike EPA testing and certification. View More
we need to have right material properties: - Front Rails - B-Pillar - Rocker - Dash/Footrest area - Floor Regarding Automotive mfg needs physical lab... View More
Florida Electrical Laboratory needed for On-site testing and verification, from pre-selected commercial customers, on a small power capacitor device, ... View More
Africa Physical Laboratory needed for physical testing of petrol, Diesel, Motor oil, Biodiesel, Jet fuel
View More
China mechanical laboratory needed for performance testing, wiper motor assay. to be tested before using on vehicle as OE product View More
West Coast Automotive Laboratory needed for diesel truck engine efficiency, emissions testing, wind resistance. View More
UK Product Safety Laboratory needed for FMVSS Testing of motor cycle helmet to ECE 22.0 or to FMVSS 218 View More
Asian manufacturer of passenger cars requires USA EPA CARB Product Safety Testing Materials Laboratory for emission testing/certification, crash test,... View More
Mechanical Laboratory required for testing a new ducted-blade radial motor for automobiles and other applications. Testing to focus on energy input/o... View More
India Automotive Materials Laboratory needed for Xenon arc testing (Weatherometer testing).
View More
Selangor, Malaysia Materials Laboratory needed for product safety testing on a gadget that saves fuel for diesel and petrol vehicles. To test for : a)... View More
India SES N 3295 Materials Testing laboratory needed to do the following tests on Automotive seating fabrics:
1. Crumpling Resistance
2. Abrasion ... View More
Europe Plastics and Polymers Laboratory needed for standard Luposol Stress Crack Testing on plastic parts injected in PE-HD for the automotive industr... View More
Oil and Petroleum laboratory needed to determine if fuel (automotive gas) is contaminated View More
NE USA Analytical chemistry labroatory needed to GC/MS Quantitate the concentration of 2-octanoic acid in ethylene glycol based automotive coolant View More
India materials laboratory needed for plastics and polymer testing mainly used in automotives,irrigation projects" View More
Mechanical, Electrical laboratory needed for ISO 6722 & JIS C 3102 testing for Road vehicles - 60 V and 600 V single-core cables - Dimensions, test me... View More
Large Automotive Manufacturer needs USA Materials Laboratory to verify chemistry & physical properties to specification provided. Material used in inv... View More
India Automotive Matericals Lab needed for ASTM Testing: ASTM D746, Low temperature impact test for PVC View More
Michigan Automotive/Mechanical Laboratory needed to Teat a small vehicle on a Global Electric Motorcar (GEM) chassis for compliane with ANSI 56.8 Bur... View More
USA Automotive, mechanical laboratory needed for certificaiton testing of 800CC IN FRAME UTV CHERY ENGINE View More
USA Analytical Chemistry Laboratory needed to test flash point, PH, and
contaminates ( microns of )
of supplied petroleum based
oil sample. ( motor... View More
Automotive Laboratory needed for engine, emissions vehicles Testing: Raw, EGR, pre & post catalyst, or diluted exhaust Bench for testing under Diesel ... View More
Looking for suppliers for vibration testing on automotive door latches. Varies from swept sine to shaped random depending on OEM. View More
India Textiles Laboratory needed for Suzuki Standard testing of automotive fabric: snag, variable load elongation change,crumpling resistance and seam... View More
FDA GLP Preclinical lab needed to evaluate the analgesic efficacy of test compounds (oral, i.v and potentially ICV) in the rat using tail flick, hotpl... View More
USA automotive, mechanical lab needed to test:
Tie Rod Boot- Key Life Test
ES SPEC-LFL Seal Test
A well as
wear test, wind-up test, fold te... View More
USA Preclinical Contract Research Organization needed for Drug efficacy testing in SOD1 mutant mice (Proof of Principle). Dose ALS (G93A SOD1) mice w... View More
Biotechnology manufacturer needs analytical chemistry lab for solubility studies of a new drug in commonly used drug vehicles such as Tween*0, Chremo... View More
Electrical laboratory needed to conduct motor loaded tests of medium voltage motor drive products
Power Paragon will provide drive in the 5000 kW t... View More
Mechanical laboratory needed for tests to be conducted on motor control assemblies as well as the individual components. View More
Automotive laboratory needed for perform machine tests. Tests like comparrative testing of 2-3 lubricants (coolants)being used in tapping, drilling, m... View More
Mechanical laboratory needed that can test automotive ignition coils - only static circuit resistance and high voltage output. View More
Automotive laboratory needed for a crash test on a motorcycle. We have made a prototype of a motorcycle that works with natural gas (CNG) so I need to... View More
Automotive laboratory needed for parts validation testing. View More
Automotive product safety testing laboratory required for testing of heat resistant materials used for performance operations. Thermal insulating mate... View More
Automotive laboratory needed for fuel efficiency testing and emmissions testing of various vehichles to confirm increase in MPG, reduction of emmissio... View More
Product Safety Laboratory needed for US Federal Federal Motor Vehicle Safety Standard Dynamically Crash Testing on new child head rest for Safety. View More
Materials laboratory needed for testing to "FMVSS 302 Test Method D45 1333" Test Property: Flame Resistance Result: Self-Extingushing Type-B 2-Test:IS... View More
Automotive materials laboratoryneeded for testing of plastic parts (cockpit, door trim) for Automotive market. View More
Automotive engineering consulting company needs mechanical laboratory for ECE standard full vehicle crash testing in Japan, South Korea, and Europe. View More
Mechanical Laboratory needed for JIS Testing (JIS D0207)Dust Testing on Starter motor and alternator View More
EPA environmental laboratory needed for off road motorcycle EPA testing View More
ISO Mecahnical Laboratory needed for dynamic Vibration test acc ISO 16750 and IEC 60068-2-64 for a small 12 Volt DC Motor used in head lamps adjuster... View More
Mechanical laboratory needed for Carb Tier III evaporative emissions testing on motorcycle small engine application. Diurnal testing required for fuel... View More
Automotive laboratory needed for SAE, ASTM, and GMW testing to SAE J882, ASTM D5034-95(2001), ASTM D1117-01 / ASTM D5733, SAE J1351, SAE J912, GMW3232... View More
Automotive Laboratory needed for testing to PSA Peugeot Citroen Specfication.
B65 2110. Supplies of Textiles and their Composites General Requirement... View More
Automotive laboratory needed for automotive balance testing View More
Automotive laboratory need for Fuel Efficiency and Emissions Testing on patented fuel modifying device. We need testing to certify the device's effica... View More
Toxicology laboratory needed for in vitro or in vivo neurite outgrowth assay testing. These could be avian DRG assays, other in vitro assays, and in ... View More
Automotive laboratory needed for testing new products to Ford spec WSS-M2P188-A1 View More
Automotive laboratory needed with proving ground facilities for durability testing and performance testing View More
Automotive laboratory needed for Vehicle (tractor trailer) powertrain durability testing on high speed track to test vehicle (tractor trailer).
View More
Automotive laboratory needed for Road load simulation testing of exhaust system. This shall include structural durability,Temperature shok or impulse ... View More
Physical laboratory needed for testing
automotive textiles: fogging, xenon, seam strength, flexing, bond strength etc... View More
Electrical laboratory needed for Electro magnetic compatibility survey testing. The survey environment includes the comms systems, microwave facilitie... View More
EPA and CARB mechanical laboratory needed for physical testing of E50cc and 150cc onroad motorcycle View More
Petrochemical laboratory needed for testing fuel quality at various points in distribution system.
2. Determining cause of contamination, if any, in ... View More
Materials laboratory needed for physical testing for automotive manufacturer. Testing needed includes testing Body Side Truck Molding for UV Resistanc... View More
Analytical laboratory needed for fuel permeation testing to General Motors test method 5113 on nylon 6 parts. View More
Physical laboratory in Europe needed for automotive thermal heat / thermic efficiency testing on automotive EGR intercoolers View More
Physical laboratory needed for testing tensile strength of automotive plastics after exposure to lubricants View More
Analytical laboratory needed for testing textiles to automotive standards. View More
Small scale study for MPTP toxicity in C57/B6 mice as a model for parkinson's disease. There are 6 groups, and six mice per group. Need to measure for... View More
Geotechnical core analysis: Particle Size Dist, Moisture Content, Bulk Desnity, specific Grav of grains, Atterberg 1pt-3pt,motor vane, UU Triax, Carbo... View More
Analytical Chemistry laboratory needed for testing Polishing compunds used for manufacturing ng automotive resale production. View More
Physical, automotive laboratory needed for automotive deflection testing to apply a certain amount of pressure to a fuel tank band and measure deflect... View More
Automotive Laboratory needed for Fuel efficiency testing. Application of test product on engine - looking for increased air flow and fuel efficiency View More
Automotive manufacturer needs laboratory for physical and electrial Testing the operating performance of the car in extreme winter climatic conditions... View More
Strength and Fatigue testing of a sintered metal coupling that attaches a pump to a motor. Must test stregth in torsion and fatigue testing of extreme... View More
ISO India Electrical Laboratory needed for laboratory ISO Testing for transformers,generators,surge arrester,motors. View More
Popular Industries
