What can we help you with?
Contract Laboratory has received the following adhesives glues and tapes Laboratory Requests which need to be fulfilled! These adhesives glues and tapes Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their adhesives glues and tapes Laboratory and Scientific Research. If you need a adhesives glues and tapes Laboratory, please Submit a adhesives glues and tapes Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Analytical Chemistry Laboratory needed for chemical analysis of thread lock material Locktite View More
Adhesive Accelerated Aging and Dishwasher Conditioning
Consumer Products Laboratory needed for accelerated aging studies with dishwasher conditioning testing of TPE application for the food service industr... View More
Specialty Chemical Manufacturer needs India Materials Laboratory for full testing of adhesive. View More
Tape Roll Adhesiveness Testing
India Material Laboratory needed for adhesiveness testing of tape rolls for the following:
1. Stickiness
2. Tensile strength and elongation - we us... View More
INDIVIDUAL Materials Laboratory needed for glue testing on bamboo floor failure. View More
Polymer Company needs Automotive Materials Laboratory for Label adhesion testing performed to GM Specification GMW 14573, focus on engine / engine an... View More
Adhesive manufacturer need Materials Laboratory for failure analysis on painters tape. Company's customers have been reporting adhesion problems, so ... View More
Public Building Art Sculpture Glue Bonding Suitability
URGENT Accredited Materials Laboratory needed for bonding suitability testing of a glue product in an art glass and metal sculpture.
The sculpture i... View More
Materials Laboratory needed for SASO certification testing of 3 adhesives:
1. PURLIN TAPE 2 X 30.YRD
2. EPDM FOAM ONE-SIDE ADHESSIVE TAPE (Various ... View More
Small Construction Co needs Construction Materials Lab for evaluation of driveway glue tile adhesive used with waterproofing that has been comedrummy ... View More
Materials Laboratory needed for testing the adhesion of a glue to ABS to ABS and ABS to Metal Clips including Clip Pull test, and Lap Shear Testing a... View More
US Company needs exporting adhesive tapes to Saudi Arabia needs ISO 17025 Accredited Laboratory with SASO certification to carry out these two ASTM t... View More
Oregon Department of Transportation (ODOT) Adhesive Bond Strength
Large corporation needs Materials Laboratory for Oregon Department of Transportation (ODOT) testing of adhesive bond strength on Transportation Safety... View More
Aerospace Adhesive Lifetime Testing
Materials Laboratory needed for lifetime testing of a new adhesive coating we are planning on using on an aerospace and defense application. View More
Adhesive Food Grade Certification
BUDGET APPROVED Third-Party FDA Laboratory needed for Food Grade certification testing of Liquid Adhesive Product according to 121 CFR as per U.S.gov... View More
Masking Tape Comparison Study Testing
Organization considering moving to new supplier of masking tape product and wants Materials Laboratory to run comparison study between new and old t... View More
Comparison Adhesion Study Testing
Slitting - Rewinding companyneeds Third-Party Independent Laboratory for comparison adhesion study testing between 2 adhesive tapes. View More
LARGE CORPORATION NEEDS ELECTRICAL LABORATORY FOR COMPLETE PVC ELECTRICAL TAPE TESTING View More
ASTM Reduced Graphene Oxide rGO Textile Performance
Materials Laboratory needed for ASTM peel off performance testing of reduced graphene oxide rGO coated textiles with adhesive tapes. The process for c... View More
Materials Laboratory needed for adhesives comparison study testing for peel adhesion, temperature range for double coated tape for corrugated applicat... View More
Adhesive Acute Dermal Irritation Study
Toxicology Laboratory needed for Acute Dermal Irritation Study on a liquid adhesive according to 16 CFR 1500.41 Method of testing primary irritant su... View More
GMW Automotive Adhesive Testing
Automotive Laboratory needed for automotive adhesive testing to GMW14573 Label specification testing. Automotive adhesive label testing. View More
ASTM Construction Materials Dry Wall Tape
Construction Laboratory needed for ASTM testing of dry wall tape for the following parameters
1. Peel test
2.Shear test
3.Tack test
4.Tensile t... View More
Adhesive Performance on Coated PSA Laminate
Independent Adhesives Test Laboratory needed for confirmation of results from the manufacturing lab for the adhesive performance of a production coate... View More
Heat Seal Lacquer Formulation Development
Industrial Analytical Chemistry Laboratory needed for formulation of a heat seal lacquer that would be used industrial production View More
ASTM Roofing Elastomeric Coating
Elastomeric Coating to ASTM D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing View More
Waterproof Medical Grade Adhesive Reformulation
PRODUCT DEVELOPMENT Laboratory needed for reformulation of a Medical Grade Adhesive to make it more waterproof while ensuring it is still safe on a... View More
Natural Rubber Molecular Weight
Materials Laboratory needed for natural rubber testing for it's molecular weight and molecular weight distribution.
View More
Study to Determine Effects of UV on Adhesive Tapes
Materials Laboratory needed for pH and UV longevity testing of adhesive tapes to confirm adhesive tapes longevity/resistance to long-term light exposu... View More
I am looking for someone who can perform testing on labels for wire and fuel line markers to Mil-T-9906C MIL-T-9906C, MILITARY SPECIFICATION: TAPE, ID... View More
Materials Laboratory needed for failure analysis of construction materials adhesive that moisture has infiltrated compared to the same adhesive in id... View More
Medical Device Certificate of Friction
Laboratory needed for Certificate of Friction COF testing of a polymer medical adhesive product. Testing to be performed in a reciprocal movement (bac... View More
ASTM Metal Coating Adhesion to Metal
Materials Laboratory needed for ASTM adhesion testing for metal coatings on a metal substrate to ASTM D4541, Standard Test Method for Pull-Off Strengt... View More
Aerosol Cans Packaging Testing
Manufacturer needs Packaging Laboratory for burst and leak testing of aerosol cans. View More
Large Corporation needs Toxicology Laboratory for skin sensitization, skin irritation, eye irritation studies (preferably according to OECD guideline... View More
Physical Laboratory needed for biaxial oriented polypropylene (BOPP) tape testing View More
Materials Laboratory needed for stability studies of liquid adhesives View More
Industrial Laboratory needed for Stability Studies on adhesive to determine the shelf life on three levels:preservative stability, adhesive bond stabi... View More
Third-Party Materials Laboratory needed to test adhesion of tape to Pressure Sensitive Tape Council PSTC Standards: 180 peel to steel and 180 peel to... View More
Aerospace Company needs Industrial Laboratory for ASTM testing: metal to metal climbing drum peel test to ASTM D1781 Standard Test Method for Climbing... View More
Cleavage Testing of Bonded Joints
Industrial Materials Laboratory needed for ASTM Cleavage testing of composite materials to ASTM D5041, Standard Test Method for Fracture Strength in C... View More
Large Corporation needed for VOC testing of cloth adhesive tape using Toyota Method TSM0508G or equivalent.
View More
Large Chemical Manufacturer needs Toxicology Laboratory for in vitro testing of adhesive for skin corrosivity to OCED 431 for potential dangerous goo... View More
Materials Laboratory needed for physical testing of VHB tapes for strength, durability, aging, and resistance to temperature View More
Materials Laboratory needed for physical properties testing of adhesive transparent tape used in mattresses including thickness of adhesive coating,co... View More
Large Manufacturer needs Materials Laboratory for forensic X-ray photoelectron spectroscopy XPS to determine the of particle contamination in a produ... View More
Large Manufacturer needs Materials Laboratory for ASTM testing of viscous adhesives to ASTM D56, Standard Test Method for Flash Point by Tag Closed Cu... View More
USA Large Beverage Company needs Materials Laboratory for adhesive coat weight testing. Similar to ASTM F 2217 or FINAT Test Method 12 View More
USA Consumer Products Laboratory needed for testing kinesiology tape products. View More
Performance Laboratory needed sports tapes testing for the strength and quality of the products. View More
Analytical Chemistry Laboratory needed for the following analyses in cigarette filter material:
Citrate analysis
Determination of Diethylene glyco... View More
Medical Device company needs materials laboratory for comparison of two adhesives to determine similarities and differences between the two such as ch... View More
Materials laboratory needed for testing 5 - 6 different hot melt glue sticks for their viscosity, open time, cure time and other technical details th... View More
Construction laboratory needed to examine the bonding performance of an adhesive and PVC flooring product combination. View More
Polymer laboratory needed forGas chromatography mass spectrometry GC-MS analysis to determine the organic purity of 2-Octyl cyanoacrylate monomer us... View More
Materials laboratory needed for testing to support expiration date extension for adhesive tapes used in aerospace industry View More
LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordan... View More
Materials laboratory needed for adhesive testing for bond strength of adhesive to metals View More
Packaging laboratory needed for ASTM testing to ASTM C868 Standard Test Method for Chemical Resistance of Protective Linings and ASTM D6677 Standard ... View More
Accredited materials laboratory needed for DIN EN testing of glass reinforced plastic part adhesives to DVS 1618/DIN 54457 test of lap shear strength ... View More
Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensi... View More
Large corporation needs polymer laboratory needed for molecular weight distribution of natural rubber materials by light scattering detector and visco... View More
Materials laboratory needed for SAE Testing of adhesive tape to SAE-AMS-T-22085 Type II View More
Composite materials laboratory needed for ASTM D1781 standard test method for climbing drum peel for adhesives or DIN 53295 testing of sandwiches; pee... View More
Materials Laboratory needed for Adhesion tape testing for confirming Adhesiveness of tapes View More
Europe company needs materials laboratory for specialized military-use tape testing for reflective, effective- fluorescence, yellow color,fire resista... View More
UK Medical device company needs paper surgical adhesive tapes tested
View More
Large manufacturing company needs testing of Sealants (Silicone/PU/Acrylic) used in building and construction to comply with ASTM standards (ASTM C920... View More
ISO Accredited USA and European Biophysical Laboratory Needed for biomaterials testing of dental implant material: to ISO 14801- Dynamic fatigue test... View More
Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic r... View More
Analytical Chemistry Laboratory needed for polyurea powder testing for residual formaldehyde:
View More
Laboratory needed for multiple testing on tape product
AAMA 713
AAMA 711
AATCC 127
ASTM D412 ? Tensile Strength
ASTM D 1970 Water Penetration
AS... View More
Need laboratory testing for VOC content in adhesive material to comply with SCAQMD rule #1168, shall be determined by USEPA'S Test Method 18, or Air R... View More
Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal ... View More
Materials laboratory needed for rheology testing of adhesive used in pharmaceuticals. Please provide quote. View More
Resin Manufacturer needs materials laboratory for adhesive scientific research study View More
LONG-TERM TESTING Materials laboratory needed for shear strength testing of an adhesive as per Federal Specification MMM-A-181D.Shear strength by ten... View More
MATERIALS LABORATORY NEEDED FOR EPOXY TESTING TO SPECIFICATION REQUIRMENTS View More
Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break ... View More
Asia analytical chemistry laboratory needed for confirmatory testing of phenolic board to determine whether the core is eucalptus and identity of glue... View More
Materials laboratory needed for crazing resistance testing for a set of adhesives which are going to be pasted on a PC, PVC and SAN substrate. View More
Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks... View More
LONG-TERM TESTING Materials laboratory needed for rheology testing of bio sealant to find its gel time(i.e time required for the substance to change... View More
Aerospace company needs materials laboratory for investigation study of delamination problem with decor laminating application.by coupled TGA-MS (The... View More
Larg Construction Building Materials company needs certification laboratory for ANSI Testing of tile adhesives & grout accoding to ANSI standards.
... View More
Materials laboratory needed for Optical Testing of epoxy samples for fluorescence, transmission, and reflectance View More
Materials laboratory needed for comparison study testing of Box tapes for smell, contaminants, strength and durability. View More
Large corporation needs materials laboratory for physical testing: Peel adhesions in cold temperatures. 90° and 180° peels on various substrates. We ... View More
Cosmetics laboratory needed for eyelash extension adhesive content testing View More
Contract Research Laboratory needed for Product development and Prototyping of an adhesive application/device in high temperature edible oil environme... View More
Materials laboratory needed for ASTM and MIL Standard testing of TTVF adhesive tapes. These tapes are getting expired. So these tapes need to be teste... View More
Mechanical Laboratory needed for ASME Testing to ASME PCC-2, Repair of Pressure Equipment and Piping View More
Materials laboratory needed for PSTC Certification Testing of Pressure Sensitive Adhesive Tape Testing - Peel Adhesion, Tack, Static Shear View More
Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone in accordance to ANSI 118.4 ... View More
Materials laboratory needed for testing to test the effects of an additive to basic hot melt formulations View More
Polymer Materials laboratory needed to conduct isothermal viscosity testing of sealants and estimate working life at various temperatures. I know thi... View More
Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building ma... View More
URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property ... View More
URGENT Materials laboratory needed for testing to ASTM F2466-10, Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transpor... View More
Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone.
View More
Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building ma... View More
Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone.
View More
Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature ... View More
India biophysical laboratory needed for surgical adhesive testing View More
Industrial Engineering firm needs performance laboratory accelerated aging process and adhesive strength study testing. The two products bonded toget... View More
Performance laboratory needed to conduct comparison test study betwee light curing adhesives activated by UV lights.
The side by side tests we wo... View More
Materials Laboratory needed for ASTM Testing of Single coated tape testing for adhesion Per ASTM D3330 or PSTC 101 using 180 degree peel on polyprop... View More
Mumbai materials laboratory needed for Low migration study of Adhesive material View More
USA Materials Laboratory needed for ANSI certification accreditation testing for reflective tapes to ANSI 107-2004 High-Visibility Clothing Standards View More
Packaging laboratory needed for tapes and film labeling testing to Standard test method of tapes and films revision 20081201 View More
Manufacturer selling to US market needs materials laboratory for ASTM Testing of Specialty pressure sensitive adhesive tapes to the US market to ASTM... View More
University Researcher needs USA Cosmetics Product safety laboratory for allergy and safety testing of eyebrow and eyelash extensions products such as ... View More
Food Materials Laboratory needed for fruit pressure sensitive adhesive testing of pressure sensitive adhesives to PSAs (USA 21CFR 175.125)that will be... View More
United Kingdom product safety laboratory needed for NFPA and ANSI Testing: Reflective Tape testing of 10 reflective tapes from safety wear to ANSI / I... View More
FDA GLP Medical Device Laboratory needed for adhesive testing to evaluate physical properties of hydrocolloid adhesives - such as adhesive strength, r... View More
Canada or USA Plastics Materials Laboratory needed for Ford / SAE J2302 thermal effectiveness testing. BMW/SAE 2302 thermal effectiveness testing. N... View More
USA Physical Laboratory needed for ASTM Testing to ASTM-D-2183 Test Method for Flow Properties of Adhesives.ASTM-D-2863 Standard Test Method for Measu... View More
Electrical Laboratory needed for International Electrotechnical Commission IEC Testing of electrical adhesive tape to IEC Specification, IEC 60454-3-1... View More
USA Materials Laboratory needed for ASTM Testing to ASTM D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus po... View More
Adhesive tapes Manufacturer needs India materials laboratory for physical testing: Peel strength & Shear Strength Test for our product at various para... View More
Acoustics and Plastics Laboratory needed for JIS testing to the standards methods below of a bonded plastic sheet with a tissue layer with 2mm of tot... View More
Food Laboratory needed for Food Packaging Testing,
Migration Testing for Food Contact Surfaces (polymers, adhesives, metals, lubricants, colorants, ... View More
ELECTRICAL LABORATORY NEEDED FOR IEC TESTING OF ELECTRICAL TAPES TO IEC93 AND 250JOINTS IEC 60502-4 AND IEC 1442 FOR PERMITIVITY, DISSIPATION FACTOR,... View More
Midwest FDA GMP Food Analytical Chemistry laboratory needed for Direct Food Contact Approval Testing on Adhesive Tapes Testing our Pressure Sensitive ... View More
South Africa Materials Laboratory needed for ASTM, PSTC Dynamic Mechanical Analysis of pressure sensitive adhesives. View More
USA Preclinical Laboratory Contract Research Organziation CRO needed for n vivo study of the wound bursting strength of cured medical adhesives. The s... View More
USA Packaging Laboratory needed for packaging environmental hold test for adhesives on packaging. Needsto hold at least a trailer of packaging. Heat, ... View More
Contract Research Organization needed for performing project in the field of adhesives, sealants, construction chemicals. Emulsion polymerization, Pol... View More
Materials Laboratory needed for sealant testing of Tile adhesives, grouts, render, and other construction products. View More
ISO Physical Laboratory needed for Photo-safe testing per ISO 18902-Foam tapes & adhesive types. View More
Physical Laboratory needed for flammability testing of aircraft leather tapestry, anti flame test FAR 25.853 for our leather, foams, fabrics, velcro,... View More
Europe Biomechanical Laboratory needed for ASTM Testing of newly developed Supro Glue (adhesive liquid used for wound closure after the operations)for... View More
Europe Biomechanical Laboratory needed for ASTM Testing of surgical adhesive
1- F2255-05: Standard te... View More
Toronto Analytical Chemistry Laboratory needed for titration testing of zinc napthenate from tapes. View More
Ontario, Canada Physical Laboratory required for FTIR Scan on three copolymer pressure sensitive tapes (backbone SEBS,butyl etc). View More
Laboratory to test the sensitivity of requester's fabrics and tapes on human tissues. Requester produces surgical packs, surgical gowns and drapes and... View More
Food Analytical Chemistry Laboratory needed for testing natural rice vinegars testing confirm the richness of tapes of Amino Acids and organic acids i... View More
USA/Inida UL 1446 Electrical Laboratory needed for sealed tube test - electrical insulation testing as per UL 1446. After completion of a long-term t... View More
India Physical Testing Laboratory needed for
Materials Screeds Testing: Compressive strength, Residual Humidity,
Waterproofing: Elasticity, Adhesi... View More
Materials laboratory needed for ASTM Testing a PVA glue.
Our glues are used extensively for the 3 applications outlined below:
1. Reduce with wa... View More
Physical laboratory needed for MVTR testing or WVTR testing. We are a manufacturing company of Carrier tapes and lock reels. As such, we are a semi-co... View More
Analytical Chemistry Laboratory needed for testing a woven polyester fabric sample for surface contamination that inhibits bonding with polyester adhe... View More
Materials Testing Lab needed for development and testing work for UV Curable Coatings and Adhesives View More
Physical Laboratory needed for EN peel testing (EN 1372) of Adhesives for floor and wall coverings View More
Physical laboratory needed for ASTM testing (ASTMC639, C793, C920, C1194, C1247) of Adhesives and Sealants View More
Manufacturer needs electrical laboratory for testing to ASTM D1000 insulation resistance by indirect electrolytic corrosion on thick tapes (0.035"). View More
Popular Industries
