Laboratory Outsourcing and Scientific Sourcing Center

Need Laboratory Services or Products?

Submit Laboratory Request

Recent Polymer Laboratory Requests

Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

BUDGET APPROVED ($1,000-$2,000)
USA third-party material testing facility needed to conduct gel time test on a resin sample.

Contract Laboratory needed for Granular Virgin PTFE Resin/ Sheet testing to 3-A Sanitary Standard for Multiple-Use Plastic Materials Test;

Test will cover;
a) Cleanabil...

Third-party testing facility or consultant needed to advise about PFAS regulations in California/USA.
We deliver items (like deco items, christmas trees etc.) to California/U...

Polymer testing laboratory needed to perform melt flow rate (MFR) testing for a polystyrene resin per the ASTM test standards.

Large Corporation needs USA ISO 17025 Contract Laboratories specializing in size exclusion chromatography with multi-angle light scattering (SEC-MALS) testing needed to analyz...

Analytical Laboratory needed for SEC-MALLS/RI method development. We would currently be submitting 2-12 samples/month, however some of our clients are moving towards commerci...

Independent testing facility needed to test Granular Virgin PTFE Resin/ Sheet sample for 3-A Sanitary Standard (SSI) for Multiple-Use Plastic Materials. Test will cover;
a) ...

Contract Laboratory needed for NASA and ISO testing 6 different cables per NASA-STD-6001 ? toxic off gassing per ISO 14624-3:2005. We need six cables tested and are looking f...

Contract laboratory needed for testing two wood polymer adhesive peel and sheet samples per the ASTM test standards.

Dental device testing facility needed to test:
1. TF 1 Duralay Temporary Crown and Bridge
(ISO 4049:2019 Dentistry - Polymer Base and Restorative Materials)
Working tim...

MULTIPLE TESTING
Third-Party Laboratory needed for ASTM Biodegradation Comparison Testing of two polypropylene carpets under high-solids anaerobic digestion conditions, with ...

Polymer Laboratory needed for small scale (gram) testing of suitability of mono ethylene glycol for polyester (PET) polymer synthesis to establish if MEG quality is sufficien...

Hi, We are a startup building a B2B recycled plastics trading and supply chain platform.

PCR sample testing against performance KPIs (IV, MFI, Izod, Flex modulus, other AS...

Canada Laboratory needed to perform pressure testing of plastic HDPE tubing of two different sizes:
Ø7/8 OD x Ø11/16 ID
Ø1/2 OD x Ø3/8 ID
Product is a grout tubing for grou...

Polymer Laboratory needed for determining Hindered Amine Light Stabilizer (HALS) concentration in a transparent plastic shroud (polyolefins).
We need to determine whether it...

Accredited laboratory needed to perform ASTM tensile, compression, and shear testing of composite plastic materials used in wind energy industry per the ASTM test standards.

Contract Laboratory needed for testing to develop the SDS for HF402 and HFX8R

Contract Laboratory needed for SAE testing of fluorocarbon (FKM) seals for Fuel tank caps in motorcycles to SAE J2659 Test Method to Measure Fluid Permeation of Polymeric Mate...

MULTIPLE TESTING
Contract Laboratory needed to test hair curling custard ingredients for safety, compatibility, and efficacy. I want to make sure the ingredients aren't only ...

MIDDLE EAST LABORATORY
Contract Laboratory needed for testing recycled polypropylene Granule.

MULTIPLE PRODUCTS
Contract Laboratory needed for Ozon Exposure Testing on rubber and plastic samples ; 100 ppm to 150 ppm by volume, for 2 hours; 9 samples
(Size Max. 75 x ...

Polymer Laboratory needed to perform the relevant ASTM tests (i.e ASTM D6814-02 and / or ASTM D 297-15.) to measure the percentage of devulcanization of a polymer (i.e the r...

MULTIPLE TESTING
Contract Laboratory needed for testing polypropylene recycled granules to match the customer requirement.

Contract Laboratory needed for colour UV resistance testing on PET plastic furniture.

CONSUMER
Consumer would like to test an unidentified recycled plastic/polymer/vinyl mulch that is used at a playground (instead of wood chips or rubber). I would like to anal...

Contract Laboratory needed for chemical composition testing of a silicon rubber sample. Our objective is to acquire as much information as possible to make sure we buy more of...

Contract Laboratory needed for ASTM Total Solar Reflectance testing of a PVC profile, please let me know the ASTM standard and the cost of testing. Also, please let me know th...

USA Contract Laboratory needed for evaluating 18 samples of PMMA material that we have test under microscope it output parameter for testing will be Heat affected zone

Contract Laboratory needed for Antimony Catalysts testing of sheet made from recycled PET flake.

MULTIPLE TESTING
Contract Laboratory needed for testing UHMW-PE Items as per DIN standards. Thanks Item Name for Test 1. Tensile Strength 2. Breaking Strength 3. Elongation a...

MULTIPLE PRODUCTS
Contract Laboratory needed for ASTM carbon distribution testing for Polyethylene wax and Polyethylene Alcohol used in cosmetic formulation and personal car...

MULTIPLE TESTING
India Pharmaceutical Laboratory needed for active pharmaceutical ingredient API testing as per USP
1. Mannitol - IR, Assay, Related substances, Nickel
2. ...

Contract Laboratory needed for ASTM testing of a new rubber formulation that needs to be tested based on ASTM D945 Standard Test Methods for Rubber Properties in Compression o...

NORTH AMERICA LABORATORY (Canada or USA)
MULTIPLE PRODUCTS
Contract Laboratory needed for for ISO decontamination testing according to ISO 8690. Materials to be included in...

Contract Laboratory needed for Total Nitrogen Testing in a green masterbatch in pellets form in a polypropylene PP carrier.

MULTIPLE TESTING
Germany Environmental Laboratory needed for complete biodegradability testing in specific by-product (sludge)

1. Initial analytics
The following parame...

MULTIPLE TESTING
Contract Laboratory needed for recycled plastic testing that it is made from 100% PP- Polypropylene plastic waste. Being an inexpensive ?moldable? material w...

MULTIPLE TESTING
Polymer Laboratory needed for the following ASTM Mechanical properties testing to the following ASTM Standards:
1 Tensile Test ASTM D638
2 Hardness Test (S...

Contract Laboratory needed for ASTM mechanical properties testing of 3D Printed polymer/Plastic test coupons according to ASTM standards.

FDA GMP Contract Laboratory needed for food contact testing service of plastic resin pellets as per FDA 21 CFR 177.1520 INDIRECT FOOD ADDITIVES: POLYMERS Subpart B - Substanc...

BUDGET APPROVED
USA Polymer Laboratory needed for raman spectroscopy on aged plastics to determine the oxidized carbon content.

POLYMER LABORATORY NEEDED TO PERFORM RGD (RAPID GAS DICOMPRESSION) OR ED (EXPLOSIVE DECOMPRESSION TESTING) FOR A RUBBER PART.

MULTIPLE TESTING
Polymer Laboratory needed for analysis of polyol samples for.Hydroxyl value, Functional groups in polyol sample using FTIR, Water content using refractometry...

USA Contract Laboratory needed for Rotor Ring testing or equivalent testing of polyproylene fiber for cohesion.

MULTIPLE TESTING
Contract Laboratory needed for the following polypropylene pellets testing of pellets that will come into contact with food, packaging and toys:

*Content ...

MULTIPLE TESTING
Consumer Products Laboratory needed for LHAMA and ASTM Safety Testing of UV cured resin possibly ( art material) as per ASTM D4236 Standard Practice for Lab...

Contract Laboratory needed for 30 day ASTM anaerobic biodegradation testing of
different foam samples as per ASTM D 5511 Standard Test Method for Determining Anaerobic Bio...

Europe or USA Materials Laboratory needed to characterize soluble polymeric degradants using ESI-MS methodThe polymers degradants within the aqueous media originate from Poly(...

Interested in or want to see more Laboratory Requests?

If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests