What can we help you with?
Contract Laboratory has received the following construction and building Laboratory Requests which need to be fulfilled! These construction and building Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their construction and building Laboratory and Scientific Research. If you need a construction and building Laboratory, please Submit a construction and building Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Chemical Company needs Laboratory Engineering Company for technical advising on building industrial chemistry testing laboratory in India. View More
Florida Fire Flame Retardant Compliance Testing
Large Corporation needs Independent Laboratory for Florida fire flame retardant compliance testing of felt sound/echo reduction panels. View More
ASTM Fence Panel and Post Testing
USA Construction Laboratory needed for ASTM Fence Panel and Post Testing including to ASTM D149 (Dielectric testing)
Fence Panels, Posts, ASTM G154 c... View More
Geology Laboratory needed for granite testing to allow for exports to European and Asian standards.
View More
Oregon Department of Transportation (ODOT) Adhesive Bond Strength
Large corporation needs Materials Laboratory for Oregon Department of Transportation (ODOT) testing of adhesive bond strength on Transportation Safety... View More
Facility Combustible Dust Analysis
Large Mechanical Contracting Company needs Industrial Hygiene Laboratory for combustible dust analysis at a company's facility View More
Bamboo Light Fixture Weathering Testing
Laboratory needed for weathering testing of bamboo material utilized in light fixtures for exposure to all outdoor elements i.e. wind, rain, sun, etc... View More
Housing Development Office needs Textile Laboratory for carpet dye fastness testing. View More
Large Industrial Manufacturing Company needs Laboratory for ASTM Testing to the following standards:
ASTM C1304 - Odor emission
ASTM C1338 - Fungi ... View More
Surface Antibacterial Resistance Testing
USA Microbiology Laboratory needed for Antibacterial Resistance Testing of door handle surface in compliance with the US requirements.
View More
Large Construction Building Materials Company needs Laboratory for Chemical/Physical Properties of a Bulk Powder Sample analysis:
Upper/lower flamm... View More
Electrical Laboratory needed for modular wiring products tested and certificated to BS8488 Prefabricated wiring systems intended for permanent connect... View More
ASTM Polyurethane Foam Panel Testing
Third-Party Polymer Laboratory needed for ASTM physical testing on 0.5 thick, high density, rigid for the following:
Compressive Strength - ... View More
DIN PVC Gutter Systems Testing
Large Construction Materials Manufacturer needs Industrial Laboratory for DIN testing of plastic polyvinyl chloride PVC gutter systems to DIN EN 607 E... View More
ASTM Thermal Insulation Testing
URGENT SASO Materials Laboratory needed for ASTM testing of thermal insulation panel to ASTM E2430 Standard Specification for Expanded Polystyrene (E... View More
ISO Polyvinyl Chloride uPVC Piping Testing
Accredited Laboratory needed for ISO testing of uPVC pipes as per ISO 1452-2:2009 standard Plastics piping systems for water supply and for buried and... View More
Construction Materials Laboratory needed for door testing to certify the insulation U value. View More
Piping Insulation Burning Characteristics
Large Healthcare Company needs Laboratory for ASTM combustibility and flammability of K-Flex insulation of pipling to ASTM E84 Standard Test Method f... View More
Europe Construction Materials Laboratory needed for fire rating test of concrete blocks. View More
Materials Laboratory needed for ASTM testing of Coatings to ASTM E-1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Product... View More
Geology Laboratory needed for granite stone testing for iron. The granite is from a granite driveway that has what appear to be iron stains coming up... View More
PLM Polarized Light Microscopy Methods
USA Materials Laboratory needed Polarized Light Microscopy Methods PLM analysis of materials for asbestos content by an NATA associated laboratory in ... View More
Cured Rubber Electrical Properties
Materials Laboratory needed for ASTM Testing to determine the electrical properties of cured rubber to ASTM D 991, D 257 Standard Test Methods for DC ... View More
fiberglass / Glassfiber reinforced plastic FRP/GRP pipes
Laboratory needed for ASTM testing on fiberglass / Glassfiber reinforced plastic FRP/GRP pipes needed for oil and gas project
1. Full regression test... View More
Materials Laboratory needed for ASTM testing of rubber flooring to the following ASTM Standards:
ASTM E648
ASTM E662
ASTM E1354
ASTM D2047
ASTM F... View More
ASTM Construction Materials Dry Wall Tape
Construction Laboratory needed for ASTM testing of dry wall tape for the following parameters
1. Peel test
2.Shear test
3.Tack test
4.Tensile t... View More
20 Minute Fire Rating Door Evaluation
Performance Laboratory needed for in field fire rating testing of two doors and frames tested for 20 minutes fire rated doors View More
Industrial Laboratory needed for ASTM tubes and pipe fittings testing to ASTM F 1387 test certification for my instrumentation fittings (Tube & Pipe ... View More
Materials Laboratory needed to determine the content and its percentages in flexible Polyvinyl chloride vinyl (pvc) View More
Third-Party Laboratory needed for fire rating of fire rated door frame and door.
View More
FTMS / ASTM Chamber Fabric Testing
Large Corporation needs Materials Laboratory to test chamber fabric to the following standards: FEDERAL STANDARD: TEXTILE TEST METHODS FTMS 191, Metho... View More
Performance Space NFPA Large Scale Testing
Third-Party Laboratory needed for large scale flammability and other testing for a performance space including:
CBC 2603.9 - Special approval. Foam p... View More
Performance Laboratory needed for ANSI/DASMA garage door testing for U-Factor to ANSI/DASMa 105. The U-Factor is the overall heat transfer coefficient... View More
Textiles Laboratory needed for fabric construction (woven vs. knitted, etc.) and fiber construction testing for customs. View More
Tests according ISO 12944-1:2018-06 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective... View More
Materials Laboratory needed for NRC for stone wool insulation.
the product we want to test is 120kgs/m³ x 100mm thickness Board
1200(L) x ... View More
ASTM Roofing Elastomeric Coating
Elastomeric Coating to ASTM D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing View More
Materials Laboratory needed for ASTM testing of insulation to ASTM E2430 Standard Specification For Expanded Polystyrene (?EPS?) Thermal Insulation Bo... View More
Composite Rebar Materials Testing
Materials Laboratory needed for full testing on composite rebars. Please provide prices View More
Noise Reduction Coefficient (NRC) and Sound Transmission Coefficient (STC)
Engineering Company needs NABL accredited Laboratory for Acoustics Laboratory for Noise Reduction Coefficient (NRC) and Sound Transmission Coeffici... View More
Coatings Anti-Carbonation Certification
Third-Party Laboratory needed for anti-carbonation certification testing of exterior paint coating View More
AASHTO Concrete Thermal Expansion
AASHTO T 336 AASHTO T336 Coefficient of Thermal Expansion of Hydraulic Cement Concretetest on JPCP View More
Polymer Coating Films ASTM Testing
Polymer Company needs Materials Laboratory for ASTM testing of polymer coating films to a) solar Reflectance as per ASTM E 903 and b) as per ASTM E 1... View More
Large Manufacturer needs Physical Laboratory for ASME testing of Fiberglass Product FRP for the following:
Lap shear test
Compress test
Glass con... View More
Laboratory needed for ANSI Testing of flooring to ANSI B101.1 Dynamic Coefficient of Friction DCOF Slip Resistance View More
Industrial Laboratory needed for glass testing for the below mentioned details
1. Thickness ,
2. Light Stability
3. Boil Test,
4. Penetration Tes... View More
Noise Reduction Coefficient NRC acoustical testing
Construction Company needs Laboratory needed for Noise Reduction Coefficient NRC acoustical testing of acoustical roof decking that needs to meet a ce... View More
URGENT / PRODUCT DEVELOPMENT Materials Laboratory needed for sound absorption testing of acoustical diffuser-absorber panel, Panel is 48x24, compos... View More
Roof Waterproofing Sheet Impact Resistance
Large Corporation needs Construction Laboratory to perform resistance to impact testing by the European Standard EN-12691 Flexible sheets for waterpro... View More
CNAS/ NATA Accredited Testing Facility
CNAS/ NATA Accredited Construction Materials Testing Facility needed for BS Glass impact test based on BS EN356 Glass in building. Security glazing. T... View More
Color Fastness Testing of Carpet
Third-Party Laboratory needed for color fastness testing of carpet of
a) Carpet floor
b) Cover floor carpet
View More
Quote for Rock Solar Reflectance
Construction Materials Company needs Geology Laboratory for solar reflectance index testing for rocks used on terraces. View More
Natural Stone Supplier needs Laboratory for ASTM testing of natural stones including marble to ASTM standards for US based customer.. View More
Performance Laboratory needed for ASTM and DIN testing of wood athletic flooring to DIN 18032 Part II for wood athletic subfloor system and ASTM F2772... View More
Materials Laboratory needed for failure analysis of construction materials adhesive that moisture has infiltrated compared to the same adhesive in id... View More
Integral Crystalline Water Proofing
Environmental Simulation Laboratory needed for complete concrete product testing by integral crystalline water proofing Tests like crystal growth thr... View More
Aerospace laboratory needed for aviation (textiles) carpet testing to BSS 7313 Boeing Edge Binding Strength. View More
Construction Materials Laboratory needed for ISO materials testing on PVC floor covering on textile backing to the following standards: ISO 105/B02 -... View More
Construction Safety Glass Testing
Safety Laboratory needed for ANSI/ ISEA testing of construction safety glasses to ANSI/ISEA Z87.1-2015 American National Standard for Occupational and... View More
Environmental Chemistry Laboratory needed for Asbestos Testing View More
Acoustics proficiency tests for accreditation
ISO 17025 Materials Laboratory needed acoustics proficiency testing to the following ISO Standards:
(1) ISO 354 Measurement of sound absorption in ... View More
Agriculture Laboratory Construction
Laboratory Architect needed for design and construction of Agriculture Laboratory. for aflatoxin and other agriculture testing. View More
Materials Laboratory needed for analysis of mineral samples for all elements specially rare elements used in construction of PV and dry cell batterie... View More
LEGAL Law firm needs Food Laboratory for contamination of bakery item tested that may have been contaminated due to store remodeling/construction dust... View More
Construction Materials Laboratory needed for ANSI testing of flexible polymer membrane material for construction. to ANSI 118.10 certification require... View More
Large corporation needs NABL Microbiology Laboratory for anti viral efficacy of paint against certain viruses. View More
Woven Reflective Materials testing to ASTM E2178.
Third-party Laboratory needed for ASTM Testing of woven high reflective breathable membrane to ASTM E2178.Standard Test Method for Air Permeance of Bu... View More
Company needs Materials Laboratory to provide a quote for ASTM Thermal Insulation Testing to ASTM C1136 Standard Specification for Flexible, Low Perme... View More
ASTM and ASME Architectural Natural Stone Testing
Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the... View More
ASTM Building Materials Testing
Construction Laboratory needed for ASTM testing to ASTM E2178 Standard Test Method for Air Permeance of Building Materials
View More
Building Materials Standards Testing
Materials Laboratory needed for plastics testing.
1. NFP 92 503 Electrical burner test used for flexible materials thickness no more than 5mm
2. NF... View More
Analytical Chemistry Laboratory needed for chemical testing for clinker using EN method 196-2 Method of testing cement View More
Construction Laboratory needed for ASTM Testing to ASTM E 329 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Sp... View More
Materials Laboratory needed for ASTM Testing to ASTM C1077 - 17
Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in C... View More
Materials Laboratory needed for prefinished plywood testing of abrasion & Scratch resistance, resistance to chemicals, cold,heat, hardness, etc.
... View More
Engineering Firm needs Materials Laboratory for ASTM Light Reflectance Value Testing to ASTM E1347 - 06(2015)
Standard Test Method for Color and Co... View More
Polymer Composite Sheet Testing
LONG-TERM TESTING Materials Laboratory needed for acoustics properties and sound absorption evaluation of polymer composite sheets of size (250 mm X ... View More
Physical Laboratory needed for joint testing for a car canopy space frame that is made using new joining method. Testing to be similiar to the type of... View More
Construction Laboratory needed for testing and certification of flameproof building materials made from resin and recycled cardboard and/or paper incl... View More
35,000 square foot office building with laboratory facilities for sale or rent Northeast USA. Very flexible and attractive terms available. View More
Lighting Manufacturer needs Consumer Products Laboratory for UL Certification Testing for chandelier. All components and wires and sockets are UL but ... View More
Materials Laboratory needed for infrared transmittance testing on on laminated glass. View More
Large Construction Materials Company needs Analytical Chemistry Laboratory for phenol purity testing. View More
LONG-TERM TESTING Construction Materials Laboratory needed for ASTM Testing of insulating sheets and tubes to ASTM C534 Standard Specification for Pre... View More
Construction Laboratory needed for asbestos testing of fiber insulation shearing. View More
Consumer Products Safety Laboratory needed for child safety testing of several push and turn containers View More
Materials Laboratory needed for ASTM C423 Sound absorption and Fire ASTM testing View More
Construction Laboratory needed for ANSI dry grout physical testing to two ANSI Standards 118.3 Latex Fortified Cement Based Grout: and 118.4 Modifi... View More
Consumer Safety Laboratory needed for safety cap testing of tree post T post / Rebar
View More
ISO 17025 Laboratory needed for sports floor testing to DIN 18032 SPORTS HALLS - HALLS AND ROOMS FOR SPORTS AND MULTI-PURPOSE USE - PART 1: PLANNING ... View More
Third-Party Laboratory needed for disassembly, examination and testing of headphones for loose staples after consumer report of two staples fell out ... View More
Laboratory needed for UL compliance testing of regulators to UL 252.Standard for Compressed Gas Regulator Accessories Inlet pressures up to 110bar View More
Geology Laboratory needed to carry out Saturate, Aromatic, Resin and Asphaltene SARA analysis and ash content on minerals. View More
Laboratory Engineering Company needed for construction and set-up oil testing laboratory for refined petroleum products. The laboratory will carry ou... View More
Engineering company needs Materials Laboratory for testing liquid product to ASTM and ANSI Test Standards: who tests ANSI 118.10, For Load Bearing, Bo... View More
Materials laboratory needed for ANSI and ASTM testing of liquid membranes to ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set ... View More
Construction laboratory needed for weld failure analysis and root cause analysis of seam failures of Air Supported Structure buildings that are produc... View More
INDIVIDUAL Materials laboratory needed for quality and composition testing of pure rock-wool insulation View More
Laboratory needed for ASTM testing of gypsum as per ASTM C471M - Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products View More
NATA accredited construction materials laboratory needed to perform a Flame Index Test to ASTM E84, Standard Test Method for Surface Burning Charact... View More
Laboratory needed for FMVSS and ASTM burn resistance testing of safety sheet vinyl flooring in accordance with FMVSS 302 and/or ASTM D5132-04 . The F... View More
Materials laboratory needed for flammability of industrial, coated textiles to two BS Specifications including: BS 7837:1996,Specification for flamma... View More
Laboratory needed for complete failure analysis of bolts that failed ASTM F3125/F3125M-15a, Standard Specification for High Strength Structural Bolts,... View More
Construction materials laboratory needed for ASTM testing of Calacatta Marble as per ASTM C 503,Standard Specification for Marble Dimension Stone. View More
Construction laboratory needed for environmental simulation / accelerated weathering testing of Exterior Grade High Pressure Laminates HPL as per EN-... View More
Metals laboratory needed for destructive testing of stainless steel tie down fixture, two component estimated break of the weakest link 30,000 Lbs. of... View More
Construction materials laboratory needed to conduct ASTM and AASHTO testing of asphalt binder to ASTM D2006 Method of Test for Characteristic Groups i... View More
Construction laboratory needed for ASTM testing of floor covering system using radiant heat energy source to 2 ASTM standards
ASTM E 648, Standard... View More
Construction materials laboratory needed for vinyl flooring testing to ANSI/ESD STM 7.1 Standard Test Method for the Protection of Electrostatic Disc... View More
Construction laboratory needed to examine the bonding performance of an adhesive and PVC flooring product combination. View More
Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durab... View More
Hardscape company needs geology laboratory needed for testing rock used for housing yards and roads to confirm absence of harmful materials. View More
Construction materials laboratory needed for properties testing of a resin/cement blend for oilfield use including compressive strength (MPa), flexura... View More
Construction materials company for agriculture needs polymer laboratory to test content analysis of PVC View More
URGENT Physical laboratory needed for ASTM composite testing to test method of ASTM E 756: Vibration Dampening Testing
The testing sample will be ... View More
University researcher needs acoustics laboratory for sound absorptivity testing and thermal conductivity testing of a composite material. View More
Building company needs construction materials laboratory for waterproof / resistance testing on windows. View More
Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure indus... View More
Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials f... View More
Materials certification laboratory needed for thermal conductivity testing of lightweight concrete to ASTM C177 Steady-State Heat Flux Measurements an... View More
Laboratory needed for UL fire testing of solar panels to UL 1703 Standard for Flat-Plate Photovoltaic Modules and Panels. View More
Large corporation needs materials laboratory for ASTM slip resistance testing of polymer and acrylic prototype bathroom tiles to ASTM 462, Standard Co... View More
URGENT TESTING Laboratory needed for corrosion testing of metals to ISO 6509 on faucet shanks. ISO 6509-2:2017 specifies assessment criteria and provi... View More
Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Therm... View More
Construction materials laboratory needed for plastIcs testing for identification of additives in plastic pipes
View More
Construction materials laboratory needed for ASTM testing of flooring to ASTM E1007: Field Measurement of Tapping Machine Impact Sound Transmission Th... View More
Product safety laboratory needed for ANSI testing of ladder levelers to ANSI 14.8-2013 (Safety Requirements for Ladder Accessories). View More
Plastics construction materials company needs laboratory for Solar Reflectance Index SRI measurement for LEED compliance to ASTM E1980 View More
Construction laboratory needed for materials and toxicity testing of naval thermal insulation testing to various standards including: NCD 1427 : SPECI... View More
Materials laboratory needed for ASTM testing for thermal conductivity of nitrile rubber Insulation foam at 0, 20, and 40 Celcius to ASTM C 518 and AST... View More
Construction materials laboratory needed for bisphenol BPA testing in polypropylene sheets
View More
Large electronics company needs product safety laboratory for fall hazard, structural integrity / physical stability / product safety testing of a com... View More
LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeri... View More
Environmental analytical chemistry laboratory needed for ISO & ASTM VOC emissions testing of window coating product to ASTM D5116 and ISO 16000-6 stan... View More
Consumer safety / building materials laboratory needed for safety, durability, and structural performance testing of a cabinet unit according to ANSI/... View More
Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV st... View More
Construction laboratory needed for core testing of concrete samples View More
Metallurgical laboratory needed for micro structure study of differing layers of zinc on zinc-coated reinforced bars (re bars). View More
India Engineering / Contstruction laboratory needed for Rock Bolt Anchor Pull Testing on site in Mumbai. View More
Construction Materials Laboratory needed for strength and durability check of glass reinforced fiber GRF material. View More
Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing. View More
Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination o... View More
Construction company needs Materials laboratory ASTM Testing for coal fly ash and raw or calcined natural pozzolan for use in concrete to ASTM C618 s... View More
Healthcare company needs materials laboratory for failure investigation for durability and performance testing of vinyl flooring that is wearing. View More
Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Perme... View More
Material science laboratory needed for fatigue testing of rebar and couplers according to British Standard. View More
Environmental simulation laboratory needed for testing glass that has been treated with a liquid. View More
Former biotechnology laboratory space in tristate area Class-A Building for rent. Available space around 30,000 sq ft , will divide View More
Power laboratory needed for testing the strength and durability of a power line cable.
View More
Materials Laboratory needed for ASTM Flooring Testing to ASTM C609 for Light Reflectance Value of one of our products in various colors. Please speci... View More
Materials Laboratory needed for AASHTO testing of Architectural coating Material to
Chloride penetration test (AASHTO T259, T260)
Rapid chloride ... View More
Civil Engineering firm needs materials laboratory for concrete and banana fiber physical testing and SEM analysis: View More
Pressure drop & CFM airflow testing on new line of HVAC cold air returns we are manufacturing. View More
Environmental Laboratory needed for AASHTO Testing of portland cement/concrete per AASHTO M85. Standard Specification for Portland Cement (Chemical a... View More
University needs urgent testing of building materials: Thermal conductivity measurement of thin insulating materials View More
Property company in UAE needs Thermal conductivity & Thermal Resistance test of Rigid Polyurethane Foam core (PUR sandwich Panels) as per EN 12667 tes... View More
Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and in... View More
Third-Party Laboratory needed for Vibration test in accordance with standard ANSI C136.31 Standards for Roadway and Area Lighting Equipment, Luminair... View More
Building Supply company needs laboratory to test thermal insulating products for building equipment and industrial installations. Determination of tra... View More
Large manufacturing company needs testing of Sealants (Silicone/PU/Acrylic) used in building and construction to comply with ASTM standards (ASTM C920... View More
Major beverage production facility needs ANSI/ASHRAE 52.2 Standard testing completed on air filters used in the building to determine current Minimum ... View More
Geology laboratory needed for construction materials performance testing of rock used for dwelling sidings if it is good for Alberta weather View More
Sports surfacing company needs Construction materials laboratory for ISO plastics testing UV testing as per ISO test method ISO 4892-2:2660 View More
Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint... View More
International Roadway construction company needs Laboratory for ASTM Testing of asphaltic plug joint for compliance to to validate ASTM D6297 complia... View More
Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials View More
Solar Panel Testing: Metal composite panel thermal properties testing required - emissivity, solar absorptivity, View More
Physical Laboratory needed exterior grade laminate testing for UV resistance View More
Environmental laboratory needed for surface water testing of 4 acre lake displaying a very small diesel oil pollution bloom from run off surface water... View More
Large Toy manufacturer needs Textile laboratory for denier counts and construction confirmation testing for three tricot fabric cuts. View More
Laboratory needed for multiple testing on tape product
AAMA 713
AAMA 711
AATCC 127
ASTM D412 ? Tensile Strength
ASTM D 1970 Water Penetration
AS... View More
ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM ... View More
Materials laboratory needed for ASTM Testing of composite construction materials to astm e 84, Standard Test Method for Surface Burning Characteristic... View More
Materials Laboratory needed for ASTM Testing of Processed woodcore Panel Board assemblies (using core material such as MDF / Particle Boards, Laminate... View More
Laboratory needed for cement testing both physical & chemical as per is 4031 & is 4032 View More
Large company needs materials laboratory needed for accelerated aging study on thermoset material with for yellowing index and light transmitting to ... View More
Electrical laboratory needed for static electricity testing for carpet tile to AATCC-134. The requirement is antistatic less than 3.58kV permanent con... View More
Construction materials company needs toxicology laboratory for toxicity and carcinogenicity testing of High pressure laminated sheet View More
Materials laboratory needed for sunlight insulation efficacy testing of insulation fabric with Polyethylene woven material, without foam nor air bubbl... View More
Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal ... View More
Independent laboratory needed for LED comparison study of 4 manufacturer's underwater LED light components to evaluate
Quality of construction ?
... View More
Large fabrication company needs analytical chemistry laboratory for Hexavalent Chromium testing
View More
Materials laboratory needed for Field Study on concrete door for soiling ability View More
Materials laboratory needed for DIN and ASTM Testing of thermal insulations foam board. Testing to To meet out the requirement of
Density: DIN 53420... View More
Electrical Laboratory needed for battery testing for charges of following test as per IS 1651, Stationary cells and batteries, lead-acid type (with t... View More
Physical laboratory needed for impact testing of TSAA Door lng FR and RR.
Test: Side Impact Test (Shoulder area, arm rest area, hip area)
Standard:... View More
Independent laboratory needed for construction protection board testing to a Canadian specification.. View More
Engineering firm needs Materials Laboratory for ASTM Testing: Sound Transmission Class Test for Concrete Masonry Blocks in accordance with ASTM E90 & ... View More
Materials Laboratory needed for engineering evaluation of a wall coating View More
Materials laboratory needed for certification testing for fire resistance. View More
Accredited UK laboratory needed for construction building products testing of flexible sheets for waterproofing to BS EN 12691, Determination of resi... View More
Consumer Products laboratory needed for textile testing of bed sheet set for thread count and construction View More
Electrical laboratory needed for Ingress Protection Testing: IP tests for an outdoor enclosure
View More
Construction Buildings Laboratory needed for ASTM Testing for Prefabricated Vertical Drains
1. Width ASTM D 3774
2. Thickness ASTM D 5199
3. Discha... View More
Middle East Proficiency Laboratory needed for ACi, ASTM construction materials proficiency testing for soil, aggregate, concrete, bitumen, water and f... View More
Laboratory needed for testing of safety belts to ANSI 10.14, American National Standard for Construction and Demolition Operations - Requirements for ... View More
Physical Laboratory needed for Surface Burning Characteristics of Building Materials as per ASTM E84 - 16, Standard Test Method for Surface Burning Ch... View More
Larg Construction Building Materials company needs certification laboratory for ANSI Testing of tile adhesives & grout accoding to ANSI standards.
... View More
Materials Laboratory needed for materials characterization testing of solid surface acrylic / polyester resin based composite material used in manufa... View More
Flooring Company needs materials laboratory for ANSI Testing to ANSI 137.1 Dynamic Coefficient of Friction View More
India conglomerate needs industrial hygience laboratory to conduct air & water quality testfrom 4 different places. Air samples to be collected and o... View More
Physical laboratory needed for ASTM Flame testing to ASTM A136 fiberglass enclosure. View More
Middle east laboratory needed for construction materials testing View More
Acoustics Laboratory needed for acoustic testing on our designer wall paneling and ceiling system. View More
Materials Laboratory needed for peel testing of non-woven, laminated material View More
Physical Laboratory needed for Coupler Slip test as per IS 16172,REINFORCEMENT COUPLERS FOR MECHANICAL SPLICES OF BARS IN CONCRETE - SPECIFICATION View More
Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building ma... View More
Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building ma... View More
Geology laboratory needed for geophysical testing: Size, abrasive index, moisture content, bulk density, gradation
These tests need to be done on ... View More
Materials laboratory needed for testing of acoustic sliding folding partition. View More
Flooring manufacturer needs NATA accredited laboratory for impact isolation of vinyl flooring. View More
Acoustics Laboratory needed for acoustic testing on our designer wall paneling and ceiling system. View More
Construction Materials Laboratory needed for ASTM Testing on Building Caulking to many ASTM Standards: ASTM C 679
ASTM C 639
ASTM D 2240
ASTM C 79... View More
Manaufacturer needs laboratory for hybrid composite testing with added carbon fibre and fly ash,though we require chemical composition of that hybrid ... View More
Physical Laboratory needed for ANSI/ IEEE Arc Resistant testing of MV Metal Clad Panel to ANSI/IEEE C37.20.7 40kA 0,3/0,5s ? 13,8kV ? 60Hz Please sp... View More
Noise control company needs RFQ from India acoustics laboratory to provide a quote for noise level testing of acoustics treated product: insider benc... View More
ISO Materials laboratory needed for ASTM PMMA panel testing to US Standards, ISO and EN standards. ASTM E90 and E413, ASTM D-638 : tensile properties... View More
Construction company needs geology laboratory for needed for mineral rock testing View More
Materials Laboratory needed for ASTM Testing to ASTM E-84, Standard Test Method for Surface Burning Characteristics of Building Materials View More
Physical Laboratory needed for acoustics testing of Light Weight Hollow Core Precast Cement Wall Panels for sound absorption and transmission View More
INDIVIDUAL Analytical Chemistry laboratory needed for asbestos testing in insulation. View More
Large company needs Canada Laboratory for Sound Transmission loss testing of an exterior residential wall assembly View More
Calgary analytical chemistry laboratory needed for Asbestos testing for house. Popcorn ceiling, drywall, and flooring sample. View More
Accredited Laboratory needed for the Testing of Earthing Enhancement Compounds. Laboratory needed that is able to do all the tests listed below:
a... View More
Corporation with quarry needs quartz ore tested for different properties including gloss, clearness, color, density and else. View More
Europe accredited laboratory needed with accreditation for the scope of the test method in accordance with
- EN 13500 - Thermal insulation produc... View More
Materials Laboratory needed for ASTM Testing of paint and coating to ASTM D7855, Standard Test Method for Determination of Mold Growth on Coated Build... View More
Materials Laboratory needed for ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials Lab testing quote for Flame... View More
EPA LEED, USGBS Environmental Laboratory needed for Formaldehyde Testing in building products. Laminate truss, urethane foam adhesive, wallboard, ... View More
Los Angeles area materials laboratory needed for ASTM Testing of toy building kits View More
Road construction company needs India environmental laboratory for black trap stone aggregate testing View More
Southern California Biomedical Laboratory needed for Biomechanical analysis Examine the potential of device for building strength and mass and for re... View More
Consumer Products laboratory needed for consumer product testing of dietary and muscle building supplements and skin care line such as moisturizers a... View More
California construction materials laboratory needed for ASTM waterproofing testing of liquid applied to foundations for
- functionality
- thickness... View More
Europe, Holland or Germany Construction Materials Laboratory needed for test method development. Lab that is capable of developing compressive streng... View More
Materials Laboratory needed for Rigid Polyisocyanurate (PIR) and Polyurethane (PUR) testing for building end-use applications. As a mandatory requirem... View More
Engineering Laboratory needed for BS 6853: 1999 Code of practice for fire precautions in the design and construction of passenger carrying trains-pass... View More
Preclinical COntract Research Organization needed for preclinical studies and biocompatiability testing of medical device implant: implantable membran... View More
Industrial Hygiene laboratory needed of ASTM elemental trace analysis of the indoor air in our manufacturing building using ICP-MS or GC-MS. Mainly we... View More
California Electrical Laboratory needed for power switching box testing of: Short Circuit test to 10KA for an Auto Power Switching Box UL1008 approva... View More
Russia Mechanical Laboratory needed for ASTM Testing: Tensile strength for fiber-reinforced polymer bars to possibility using this product in construc... View More
India materials laboratory needed for paint testing to BS 476, Fire tests on building materials and structures. Guide to the principles, selection, r... View More
Environmental Consulting Firm needs Geochemistry Laboratory for material analysis on 2 samples . The first sample is what I think is fire brick with... View More
Manufacturer of expansion joints needs physical laboratory for acoustical noise testing on fabric used for expansion joints based any below standards,... View More
California Materials Laboratory needed for construction materials testing of Concrete Aggregates to ASTM E228-11, Standard Test Method for Linear The... View More
Materials laboratory needed for ASTM Testing of wallcovering to ASTM E-84 Standard Test Method for Surface Burning Characteristics of Building Materia... View More
Pakistan materials laboratory needed for BS Testing: Fire Proof testing of paint to BS STandard BS476, Method of Determination of the fire resistance ... View More
Construction materials laboratory needed for acoustical testing: ISO and ASTM Testing for sound transmission Loss and absorption for building products... View More
NJ MATERIALS LABORATORY NEEDED FOR ASTM TESTING: STONE TESTING OF LIMESTONE TILES USED AS A BUILDING MATERIAL TO LIMESTONE BUILDING MATERIALS SPECIFIC... View More
NEW JERSEY MATERIALS LABORATORY NEEDED FOR ASTM TESTING: SPECIFICATIONS OF LIMESTONE TILES (BUILDING MATERIALS) View More
Europe Materials Laboratory needed for Construction Products & Building Materials Testing View More
California Laboratory needed for physical testing on asphalted Kraft paper (building product)samples, 3 different basis weights on the following: DRY ... View More
Europe laboratories needed for building testing View More
Materials Laboratory needed for ASTM Testing to ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C518, ... View More
Materials Laboratory needed for EN safety film testing to BS EN Standards: BS EN356, Glass in building. Security glazing. Testing and classification o... View More
Toronto materials laboratory needed for stone testing a new type of stone - chemical testing, durability testing, toxicology testing for any environm... View More
Large multinational corporation needs New York materials laboratory for ASTM Testing: geotechnical analysis Testing for construction design and permit... View More
Furniture company needs physical laboratory for ISO certification testing: acoustics testing and research for two new products. Acoustics Products nee... View More
Materials Laboratory needed for ASTM Testing to ASTM D5385. Hydrostatic pressure resistance testing per ASTM D5385Multiple samples of various construc... View More
India construction laboratory needed for failure analysis of factory building to analyze each existing building factory building for durability and st... View More
Canada analytical chemistry laboratory needed for Canola oil contamination testing on an EPDM roof that is going to be repaired. The tenant paying for... View More
Sweden, Finland, Lithuania, Estonia, Poland Physical Laboratory needed for acoustic testing for construction materials and fire resistance testing for... View More
Environmental Laboratory needed for salt testing of river sand. The sand is to be used for construction purposes in concrete work
View More
NY construction laboratory needed for air quality testing, mechanical systems testing, plumbing testing, life safety systems testing, building interco... View More
China Physical Laboratory needed for building material structural testing of light weight concrete wall panels test for structural behaviour in compre... View More
China physical laboratory needed for stuctural behaviour testing of wall panels for structural behaviour in compression and bending to find a role as ... View More
USA Physical Laboratory needed for physical testing. Need about 5 different metal construction brackets tested 3 trials each test. most brackets will ... View More
Canada physical materials laboratory needed for ASTM Testing: thermal & fire testing for 2 construction materials: an insulation material and a floori... View More
Electrical Laboratory needed for lightning conductor testing in building.
View More
Construction Materials Laboratory needed ffor insultation testing:Sound absorption of various insulation materials. Materials such as fiberglass insu... View More
USA forensics laboratory needed for Furfurylamine testing - one sample of construction debris collected from a fire. View More
UK physical laboratory needed for optical testing.. Compare light transmittance between two touch sensor variants.
Construction 1:
4mm plain glas... View More
International mining company producing aggregates for the construction needs oil laboratory for scheduled oil sampling (SOS)of our crushing and screen... View More
US Construction Engineering Laboratory needed for salvage structural stell testing of World Trade Center salvage. We would like to know what melted ... View More
INDIA MATERIALS LABORATORY NEEDED FOR ASTM TESTIN OF POWDER FORM, NON-HAZ, CONSTRUCTION MATERIAL WHICH IS USED WITH CONCRETE TO ASTM C1240, Standard S... View More
Israel, Turkey or Europe physical laboratory needed for roduct classification testing - full test to a padlock to meet grade 4 by the BS EN 12320, Bui... View More
Engineering laboratory needed for security glazing, BS EN 356-2000 axe testing to BS EN 356-2000 Glass in building. Security glazing. Testing and cla... View More
Physical, Mechanical Laboratory needed for physical BS EN testing to BS EN 50182: ACSR Bison Type Test 1(One)sample .
1.Verification of constructi... View More
Materials Laboratory needed for ASTM Testing to ASTM E1980,Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaq... View More
Construction Materials Laboratory needed for building materials testing before importing from China View More
Acoustics and Plastics Laboratory needed for JIS testing to the standards methods below of a bonded plastic sheet with a tissue layer with 2mm of tot... View More
Asia analytical chemistry laboratory needed for JIS Testing, Formaldehyde Testing to JIS A 1901 jis a 1901:2009 determination of the emission of volat... View More
Construction Forensics Laboratory needed for failure investigatio testing of "tile" with a blister "about the size of a nickel." The subcontractor de... View More
California Textile Laboratory needed for ASTM Testing, fabric construction testing to ASTMD1777 & ASTMD3774 (thickness and width) 10 samples machine ... View More
Construction, Engineering, Geology Laboratory needed for geotech survey for a proposed factory site in Dammam, KSA.
View More
Plastics Laboratory needed for Quality COntrol Testing, acrylic testing of acrylic used for the see-through tank wall of a new shark tank to be instal... View More
Large Construction Company needs Saskatchewan Materials Laboratory for ASTM Testing Site inspection of cementitous fireproofing testing to ASTM E605 a... View More
California Materials Laboratory needed for ASTM Testing, testing sound attenuation of existing walls and ceiling assemblies in a medical office buildi... View More
North America Physical Laboratory needed for Thermal cycling testing: Heat exchanger construction/forestry Thermal cycle aluminum tube and fin radiato... View More
Materials Laboratory needed for ASTM testing of cement based construction chemicals which give concrete water impermeability character. Our products m... View More
Construction Laboratory needed for ASTM Testing: astm d4787-08 continuity verification of liquid or sheet linings applied to concrete substrates. View More
Physical Laboratory needed for ASTM testing to ASTM E 408 of aluminium foil and metalized polyethelene(MPET) to ASTM E 408. Aluminum Foil isfor elami... View More
USA Materials Laboratory needed for DIN Testing Fire classification of construction products and building elements to DIN EN 13501-1 standards View More
Texas construction laboratory needed for LEED certification testing of Construction Building Materials to ASTM C1549: Concrete Solar Reflective Index ... View More
Environmental consulting firm needs materials laboratory for fingerprinting of wood for installation of several wood beams installed in an area of his... View More
California Physical laboratory needed for wind tunnel testing of construction componetsMetal Panels attached to a steel frame. Would like to test to d... View More
Saudi Arabia construction and building, engineering laboratory needed for vibration test of a building in which Air Conditioning Equipments are operat... View More
Middle East Construction Laboratory needed for Field and Laboratory testing of Soil, Concrete, Steel Reinforcement & other miscellaneous items for our... View More
USA Physical Laboratory needed for strand relaxation test of 1000 hours relaxation test for a strand which is used in tensioned anchor construction. View More
India Construction Laboratory needed for Testing of Wall View More
India ISO Acoustics Laboratory needed to test textile fabrics according to ISO 717 - Acoustics - Rating of sound insulation in buildings and of buildi... View More
Contract Research Organization needed for performing project in the field of adhesives, sealants, construction chemicals. Emulsion polymerization, Pol... View More
Liberia Materials/Engineering Laboratory needed for testing road construction material and construction quality. View More
India Occupational Health and Hygiene Laboratory needed for performing asbestos testing on construction building materials. View More
Materials Laboratory needed for sealant testing of Tile adhesives, grouts, render, and other construction products. View More
USA Materials Laboratory needed for ASTM materials testing as per ASTM E84 AND BS 476-building materials treated with fire retardant chemicals are pla... View More
Eastern USA Non-Destructive Metallurgical Laboratory needed to test a piece (1/2" by 1/2" triangle shape) of corrugated metal roofing material taken o... View More
CANADA PLANT GENETIC ENGINEERING LABORATORY NEEDED FOR CONSTRUCTION OF A GENE FROM GENBANK AND TRANSFECTING THIS GENE INTO TURF GRASS (PREFERABLY VIA ... View More
Geotechnical Laboratory needed for testing rocks which are used as building materials in molding,for roads..with grade of 6mm,12mm,20mm 40 mm View More
Environmental Toxicology Laboratory needed for mammalian toxicology testing using one of the listed protocols-need to determine the LD 50 of waste str... View More
Hong Kong Consumer Products Safety Laboratory needed for product safety testing on release agent for concrete construction - 1 sample to be analyzed. ... View More
Asia BS EN Materials Laboratory needed for testing in accordance to BS EN 12320 Building hardware - Padlocks and padlock fittings Requirements and tes... View More
India ASHTO Laboratory needed for transportation testing to obtain certification for geo-textiles for the construction industry. View More
Middle East ISO Laboratory needed for spinal construction cyclic test as per ISO 12189. View More
Toronto, ON ASTM Materials Laboratory needed to assist with testing of construction waterproofing materials in accordance to ASTM C1305, C1246, C957 a... View More
USA Electrical Laboratory needed for testing in accordance to CCC.
1.Marking and instructions
2.Electric construction
3.Earth leakage current
4.E... View More
Toronto, ON Physical Laboratory needed to test paint applied to a building corridor to determine whether the installed product is in accordance with s... View More
USA NES LABORATORY NEEDED TO TEST ONE STYLE OF AUTOMOTIVE CARPET FOR CONSTRUCTION REQUIREMENTS ONLY - NO COLOR REQUIREMENTS - USING A SPECIFIC TEST ME... View More
Haryana, India Materials Laboratory needed for testing construction materials. View More
Pacific USA construction materials testing laboratory needed for metallurgical, stainless steel testing to determine if it meets the 316 stainless st... View More
Physical Laboratory needed for acoustical testing, ASTM E492 test report from qualified acoustical test lab on hardwood flooring with the under mat fo... View More
USA Biophysical Laboratory needed for Medical Product Stress Testing for construction of the product and weight limitations, (weight support specs) an... View More
Building Company needs Southeast USA, IAS, A2LA mechanical laboratory for Weld testing View More
Analytical Chemistry Tribology Laboratory needed for purity testing heating oil used in buildings to determine it's not reprocessed been having proble... View More
Construction Company needs environmental laboratory for asbestos PLC point light count to see if the samples are less than 1% or are higher.
View More
Japan environmental laboratory needed for mold testing (using air samples)in Sapporo building View More
Middle East Materials Laboratory needed for construction building testing View More
India ASTM E1980 Building Materials Laboratory needed for SRI value for the chemicals coating on the terrace of building with waterproofing and insula... View More
India Materials Laboratory needed to conduct tests for enhancing the strength of historic wood used in ancient buildings by applying wood preservative... View More
South Africa Geology Laboratory required for borehole geological testing of mud and sand for 5 storey building. View More
Tucson Arizona ASTM E1980 - 01 Construction Materials Laboratory required for testing concrete pavement in place for Solar Reflective Index. Two to t... View More
USA Local Land Development Regulations for Teton County, WY, require Building Materials Laboratory for testing "no reflective materials" it is our int... View More
NABL Materials Laboratory required for testing of physical and chemical properties of construction material
View More
Canada Mechanical Laboratory needed for vehible baseline testing of diesel engine to record output power, emissions, etc...Our company is currently wo... View More
Asia, Australia, USA, India B.S.874 PART 2:2.1 :1986,B.S. 4370 Method 10 Materials Laboratory required for testing Building Insulation Materials for T... View More
Toronto CANADA Environmental Laboratory required to test Asbestos in construction materials - Random samples from each level in a home. (3) View More
Orange park Florida Acoustics Laboratory needed to test sound level before and after construction View More
USA NFPA 286 MATERIALS LABORATORY NEEDED TO TEST SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS. View More
India Materials laboratory needed for ASTM Surface Burning Testing of Extruded Polystyrene Foam Boards Thermal Insulation according to standard ASTM E... View More
Eastern USA product safety laboratory needed for UL Testing of scotch marine boiler under ul standards 726 and 795
and or a MEA Test for NYC Building... View More
PHYSICAL LABORATORY NEEDED FOR NON-DESTRUCTIVE TESTING, INSPECTION FOR FALLOWING STEEL CONSTRUCTION: I TYPE BEAM I10/22 WITH 50 FT LONG INSTALLED BETW... View More
USA A2LA Construction Manufacturer needs Materials Laboratory to test surface tension (dynes/cm)
on painted panel surface. View More
Research Foundation needs Eastern USA biomechanical laboratory for Cyclic testing of allografts for ACL reconstruction involving a cadaver tibia, a ti... View More
AFRICA MATERIALS LABORATORY NEEDED TO TEST CONSTRUCTION MATERIALS(WOODEN, GYPSIUM, WATER PROOFING AND TEXTILE MATERIALS TO BE USED FOR A HOTEL CONSTRU... View More
Asia IEC Electrical Laboratory required for certificate; type test for performance and type test of construction for the kind of fuse - disconnector ... View More
Greater Washington, DC metro area Microbiology Laboratory required for testing of process water from building chill loop to include Total Viable Count... View More
USA Materials Laboratory needed for NFPA 701 Flammability testing of Construction tarps Is this something that you can do and what is the turn around... View More
British Columbia, Canada Environmental Laboratory needed for soil testing. My client owns several adjacent properties in Langley, BC that they are co... View More
Japan as per Japanese Standards Occupational Health and Safety and Environmental Laboratories needed for the following testing:
Indoor Air Quality (I... View More
West Coast USA Physical Lab needed for CAN/ULC S102.2 flammability testing of PETG based product tested for the CAN/ULC S102.2 surface burning charact... View More
Canada geotechnical engineering laboratory needed for soil stability assessment for house construction on farm View More
Textiles laboratory needed to provide a written and visual representation of the weave construction and fiber content and yarn analysis. View More
Delaware lab needed to test soil compaction testing at a construction site in Newark, Delaware. The soil must be capable of sustaining a loading of 20... View More
American lab to test construction of solid bamboo flooring, tongue & grooved planks. Looking for the following testing:
Hardness ASTM D 1037 Janka B... View More
Analytical Chemistry laboratory needed for the following characterization study:
Enoxaparin Sodium injection of the following tests 1) IR spectra 2) ... View More
Analytical chemistry laboratory needed for non-destructive testing of 7 braided samples size #2, roughly a meter in length to to identify braid constr... View More
Acoustics laboratory needed to evaluate the Sound Transmission Criteria (STC) rating that a condominium building that is in a 90% finished state will ... View More
Biotechnology laboratory needed for the following:
Construction and screening of partially random (15, site specific randomization in 45 nucleotide... View More
Biochemistry Laboratory needed for construction and screening of partially random (15, site specific randomization in 45 nucleotide long sequences) ol... View More
Biotechnology lab needed for construction and screening of partially random (15, site specific randomization in 45 nucleotide long sequences) oligonuc... View More
Environmental laboratory needed for lead levels testing in dust collected from building renovations View More
Product Safety Laboratory needed for CE Testing for compliance of CE/ETAG 0012 for log home building kits View More
PHYSICAL LABORATORY NEEDED FOR DIN 4102 FIRE BEHAVIOR TESTING OF BUILDING MATERIALS, PP DRANGE PIPE View More
Materials laboratory needed for testing new commercial construction. View More
ISO Materials Laboratory for ISO testing ceramics and refractory building materials View More
Physical Laboratory needed for ANSI testing for Compression strength, Tensile strength of adhesive mortars construction materials. View More
Microbiology laboratory needed for water testing from a new construction site and testing for bacteria. View More
Mechanical laboratory needed for construction testing of 3-5 new models of mountain bicycles a year ? 2. How long would such bicycle testing take? 3. ... View More
Physical laboratory needed for EN 12320 testing on Building hardware. Padlocks and padlock fittings. Requirements and test methods View More
NABL Materials laboratory needed materials testing(Building and construction materials, Road and Highways materials)for our ongoing project . For that... View More
Toxicology laboratory needed for testing African Mahogany sawdust from construction grade lumber that is causing blistering skin lesions in those expo... View More
Materials laboratory needed for acoustics testing of noise attenuation material requirements Rw=30dB
Measurement shall be according to:
ISO 140-P... View More
ISO Physical laboratory needed for EN, ASTM testing of glass for building use (Eg. float glass, patterned glass) according to Kenyan standard KS 1535... View More
Construction laboratory needed for IAQ testing and smapling including: Formaldehyde, 50 parts per billion, Particulates (PM10) 50 micrograms per cubic... View More
Electrical laboratory needed for Electro magnetic compatibility survey testing. The survey environment includes the comms systems, microwave facilitie... View More
Textiles laboratory needed for Fabric Construction Testing of silkworm duvet and pillow View More
Textile laboratory needed for ASTM Testing (ASTM E48 )fire test on building material. View More
Geotechnical laboratory needed for quality testing of cement, iron and their combination in construction. We need also need asphalt testing. View More
Physical laboratory needed for full textiles testing: Fabric Weight,Construction
Neck Opening Stretchability of t-shirts distributed to Mervins, JC ... View More
Physical laboratory needed for textiles testing of several fabrics for: chemicals,fire and water resistance. dimention and construction testing. View More
UAE, Dubai Materials laboratory needed for testing marine and construction materials View More
Contract microbiological lab for testing autologous bone marrow tissue raw material, in-process and finished product microbiology and endotoxin test... View More
Determination of unknown residue developing on the exterior surface of in-service building material by physical, analytical chemistry, mechanical or ... View More
Test strength of material to judge suitability for use in handbag construction.Test dye fastness of printing, rub test and dye fastness test.Irish Lin... View More
Silver content, construction of silverfiber, far infrared ray radiation, antibiosis, color fastness, preventig static, tick. 99% Polysester, 1% Silver... View More
Popular Industries
