Laboratory Outsourcing and Scientific Sourcing Center

Need Laboratory Services or Products?

Submit Laboratory Request

Recent Medical Devices Laboratory Requests

Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.

We need biocompatibility testing of a dental medical device per ISO 7405 standard.

We need neonatal skin mimicking phantom with different bilirubin concentration (1 to 30mg/dl) for testing our non-invasive jaundice meter. Looking for providers in Tamil Nadu ...

Need animal testing for an in vivo microfluidics device that oxygenates the bloodstream by generating O2 from water in the blood. Once this prototype devi...

LONG TERM

Looking for laboratory testing medical device for Hydrogen Peroxide sterilant (solution) per ISO 22441:2022 / PREN 17180(MAIN).

Vaporized Hydrogen Perox...

SOUTH KOREA Medical devices laboratory needed for thermal effect testing of disc decompression presurgical products per the FDA 510(k) guidance (Premarket Notification (510(k)...

MULTIPLE PRODUCTS

Need ISO 17665 testing for Surgical Instruments: Cutting (scissors) & Retractors, and reports per the Saudi Food and Drug Authority. ISO 17...

We are a Singapore-based medical device company developing an endoscope product. We are looking for a lab to assist us in performing H2O2 residuals te...

A US-based lab is needed for the validation of a blood testing device.  We need to contract a 3rd party to do some validation on our hardware for our investors.

USA medical device testing lab is needed for biocompatibility testing ( ISO18562-2 AND -3 ) for a medical device.

Medical Device Laboratory for ISO pharmaceutical syringe testing:
• AD Syringe (2ml): Complete testing, including the Re-use Prevention Feature Test, for compliance with ISO ...

MULTIPLE TESTING

MULTIPLE PRODUCTS
Start-Up  Company needs Medical Device Biological Laboratory for producing and testing allograft prototypes.

MULTIPLE PRODUCTS

MULTIPLE TESTING
Medical Device Laboratory needed for Relative Dentin Abrasion RDA testing for toothpaste and prophy pastes. Could you please p...

MULTIPLE TESTING

South America Medical Device Laboratory needed for AAMI testing for disposable surgical gowns.

MULTIPLE TESTING
LONG-TERM TESTING
USA Certified laboratory (for FDA clinical data submission) needed to perform fluorometric Prostate Specific Antigen (PSA) analysis using...

Packaging Laboratory needed for packaging, shipment and transportation validation testing of hemodialysis machine These tests may include: - Atmospheric preconditioning (ambie...

Medical Device Laboratory needed for testing cut out performance for a Nailing system product. Product is intended for use with trauma titanium screws.

USA LABORATORY
Biotechnology Company needs USA Contract Analytical Laboratory for identification of unknown chemical that has appeared on one of their diagnostic test produc...

LONG-TERM TESTING

BUDGET APPROVED ($5,000-$10,000)

Medical Device Laboratory needed for ANSI impedance testing for conductive hydrogel used for a skin care medi...

Large Medical Devices Company needs Polymer Laboratory for ASTM spectrophotometer testing or resin pellets as per ASTM E313 for polymer yellowness index determination, ASTM D1...

Government needs Contract Laboratory for identification of a piece of debris from a sterilised medical devices  to determine the origin.

IRELAND / UK Class 1 Medical devices laboratory needed for manual wheelchair chair base brackets testing per the ISO 7176-1, 8, and DFMEA standards:

- stability

URGENT

MULTIPLE PRODUCTS

BUDGET APPROVED ($5,000-$10,000)

SOUTH KOREA Medical devices laboratory needed for thermal effect testing of disc decompression p...

MULTIPLE TESTING & SAMPLES

Medical device laboratory needed for ANSI/AAMI testing blood pressure sensor parts as part of qualification. We need the following test...

Medical device laboratory needed for ISO 5367 testing for a novel continous positive airway pressure (CPAP) device.

ISO 5367: Anaesthetic and respiratory equipme...

URGENT
MULTIPLE TESTING & SAMPLES
Third-party medical devices testing lab (India-based preferred) needed to conduct transportation and storage simulation tests for Yankauer ...

Medical Device Laboratory for validation of the reprocessing protocol of a reusable medical device (Surgical dental retractor - critical device). Manual cleaning, disinfection...

URGENT
USA Contract Laboratory needed for skin Irritation testing services for a blow-molded plastic arm support used in medical imaging.
I look forward to the details, Info...

URGENT
Independent material testing facility needed to test a 316L (low carbon) stainless steel dowel pin for the presence of natural rubber latex, per ASTM D6499 (Standard T...

MULTIPLE TESTING
BUDGET APPROVED ($5,000-$10,000)
USA Contract Laboratory with established test methods for detecting the percentage of antibiotic in the elute samples of bo...

MULTIPLE TESTING
Third-party laboratory needed for testing a prototype medical drill bit. We would provide the test protocol and the drill bit samples to be tested. Essential...

Independent clinical research facility needed to help with the testing and development of our Platelet Digital Storage Device (DSD) and a brand-new peptide called CRP-A platel...

Third-party lab needed to conduct the IEC 60601-1 testing (General benchmark standard for medical devices) a patented new CPR (only chest compressions) device operated by a 12...

LONG-TERM
ASIA / PAKISTAN accredited testing lab is needed for the testing of surgical absorbent cotton wool (as per US 704:2014).

Contract laboratory needed to perform ASTM Testing to ASTM F3574 (Standard Test Methods for Sacroiliac Joint Fusion Devices) test on an SI (sacroiliac) construct.

URGENT
US Independent medical device testing lab (Chicago-based preferred) needed for testing an infusion pump for failure and or improper calibration

URGENT
Asia Contract Sterilizer needed for testing e-beam compatible medical device components at (50-60) kiloGrays or (2x 25) kiloGrays (kGy).

Third-party drug testing laboratory needed for quality testing medicines from different suppliers.
Can u please confirm if your company provides that facility?
We are an NG...

MULTIPLE SAMPLES
LONG-TERM
Independent medical research laboratory (Pakistan preferred) needed for testing GDPs (glucose degradation products) in our peritoneal dialysis sol...

MULTIPLE TESTING
Analytical chemistry laboratory needed for following Activated Carbon Testing by ASTM standards:
- Moisture Content (%)
- Carbon (%)
- Hydrogen (%)
- ...

URGENT
Third-party personal care products testing facility needed for testing eight samples of compression bandage according to the British Standard (BS) 6612 - Specification...

URGENT
MALAYSIA Medical device testing laboratory needed for e-beam sterilization of a non-sterile medical device.
We supplied the medical device as non-sterile and are requ...

URGENT
MULTIPLE SAMPLES
US/NEW JERSEY Contract laboratory needed to measure Opticlear content in 20 samples of metal arbor we use in production.
Location - Arbor well;
Ra...

URGENT
MULTIPLE TESTING
TURKIYE Contract laboratory needed for providing packaging and shipment validation test report for hemodialysis machines per the ASTM D4169-16 (Stand...

MULTIPLE TESTING
MULTIPLE SAMPLES
CHINA ILAC-MRA, CNAS and ISO 17025-certified independent medical device testing laboratory needed for IEC 60601-1 and IEC 60601-1-2 testing...

MULTIPLE TESTING
Contract Medical Device Laboratory needed for ISO 10993 testing on Class IIb medical devices, concentrates for bicarbonate hemodialysis:
- Evaluation of the...

BUDGET APPROVED ($10,000-$25,000)
MULTIPLE TESTING
Large eyewear and lenses supplier needs an accredited contract laboratory to conduct oxygen permeability testing of 12-15 ...

MULTIPLE TESTING
MULTIPLE PRODUCTS
Asia packaging laboratory needed for ASTM integrity and strength testing for sterile dental medical device pouch packaging. Following are ...

MULTIPLE TESTING
Contract laboratory needed for a medical device prototype testing for
Platelet Clotting
Bone Graft Handling
Platelet Concentration
Output pH
Output Volu...

Interested in or want to see more Laboratory Requests?

If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests