NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent polymers Laboratory Requests

Submit polymers Laboratory Requests

Contract Laboratory has received the following polymers Laboratory Requests which need to be fulfilled! These polymers Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their polymers Laboratory and Scientific Research. If you need a polymers Laboratory, please Submit a polymers Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

ISO Plastics Testing

Polymer Laboratory needed for ISO Testing of plastics according to 3 ISO Standards: ISO 4577 Plastics -- Polypropylene and propylene-copolymers -- Det... View More

FDA PP and PBT nonwoven meltblown

Materials Laboratory needed for food contact surface testing of polymers PP and PBT nonwoven meltblown to the following FDA Code of Federal Requlatio... View More

FDA Paper Straws Food Additives Testing

LONG-TERM TESTING Third-Party Food Laboratory needed for food additives testing of paper straws to 21CFR 177.1520 Indirect Food Additives Polymers -... View More

Glycol Refractive Index

Materials Laboratory needed for ASTM Refractive Index Testing performed on a a hydantoin glycol used as a resin cross linker used in coatings and poly... View More

ASTM Testing

Polymer Laboratory needed for ASTM Testing to 3 ASTM Standards: ASTM D5526
ASTM D5988
ASTM D6691
View More

Waterproofing Testing

Materials Laboratory needed for ASTM testing of EPDM rubber waterproofing membrane based on ASTM D4637(Type I) requirements View More

ASTM Plastic Products Biodegradability Testing

LONG-TERM TESTING Disposable plastics company needs microbiology laboratory for ASTM biodegradability testing of a wide range of plastic disposable pr... View More

The Effects of Moisture on 3D Printing

Polymer Laboratory needed for conducting study on how moisture can affect the 3D printing process and/or mechanical process of photo-active resins. Mo... View More

Polymer Composite Sheet Testing

LONG-TERM TESTING Materials Laboratory needed for acoustics properties and sound absorption evaluation of polymer composite sheets of size (250 mm X ... View More

Polyurethane Resin

Materials Laboratory needed for critical micelle concentration(CMC) curve using Dynamic Tensiometer (DCAT) for STD polyurethane resin versus surfacta... View More

Index of Refraction of Polymeric System

LONG-TERM TESTING R&D Polymer Laboratory needed for determining the index of refraction of polymeric system (a flat solid sheet) on 10-20 samples. View More

ISO 17025 Accredited Toxicology Laboratory needed for biodegradability and toxicity testing of biodegradable plastic to validate biodegradability and ... View More

Polymer Laboratory needed for ASTM testing of polypropylene fibers to meet ASTM standards C1116/C116M, C1609, D638, and any others that may need to ... View More

Materials Laboratory needed for chemical analysis of polypropylene fabric to the below specifications:

1. UV content analysis. we wish to know the... View More

LONG-TERM TESTING US Company needs Polymer Laboratory with Erichsen 430P tester to test the scratch resistance of automotive molded plaques per the Vo... View More

Polymer Laboratory needed for gathering kinetic or concentration data on a polymerization reaction that occurs in our formulation. Similar to the data... View More

Pharmaceutical company needs laboratory for USP compendial testing of HDPE Bottle as per Current USP 661.1 & 661.2 compliance methods., View More

Polymer Laboratory needed for ASTM thermal conductivity testing of epoxy polymer matrix composites View More

PRODUCT DEVELOPMENT Laboratory needed for pilot plant scale polymerization trials to develop new products of a reactor system of 50-100 gallons size c... View More

Plastics Laboratory needed for urethane testing to HKMC spec MS300-55 (release of volatile organic compounds) testing on a UVA-cured acrylated uretha... View More

Polymers Laboratory needed for conducting an environmental simulation study on polycarbonate headlight lens of an led headlight for freezing rain and ... View More

Materials Laboratory needed for the determination of total mass loss and collected volatile condensable material from outgassing in vacuum environment... View More

Laboratory needed for polymer testing to OECD guidelines to support regulatory submission including:

111 Hydrolysis as a Function of pH
117 Partit... View More

Polymer Laboratory needed for polythene film testing for the presence of Tris Nonylphenyl Phosphate ) & 4-np free (P-nitrophenol) in the polythene fil... View More

Polymer laboratory needed for rheology testing to determine the viscosity on Polyamide 06. Is this possible at your end ? View More

Plastics laboratory needed for gamma ray irradiation and measurement of light transmittance in PET bottles used in food and beverages. For measurement... View More

Polymer laboratory needed for laser transparency testing on plastic nylon parts.The values of laser transparency apply on every 12 points located on ... View More

Materials laboratory needed for ISO polypropylene testing: charpy impact strength analysis according to ISO 179-2/1eU for Notched and unnotched Polyp... View More

LONG-TERM TESTING Materials laboratory need for optical testing of polycarbonate resin lenses for transmittance, visible light wavelength blocking, an... View More

PRODUCT DEVELOPMENT Polymer laboratory needed for product development of hot glue product from photopolymer waste material View More

Polymer laboratory needed for Forensic and Root Cause analysis of the manufacturing of RF welding of vinyl PVDF AND PVC materials View More

Large Pharma needs polymer laboratory to study and develop new blends of polymers including the characterization (mechanical, physical) of the produce... View More

Materials laboratory needed for preparation and evaluation of the resulting properties of an elastomer (styrene + isoprene) when mixed with some ceram... View More

Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification... View More

Research group needs polymer laboratory for fatigue crack growth rate measurements on transparent composite polymer specimens at low and high temperat... View More

LONG-TERM TESTING Polymer laboratory needed for viscosity testing and CT Scanning of automotive molded parts. View More

Plastics laboratory needed for shrink film testing for:
puncture thumb edge, puncture sharp edge, tear strength and haze View More

URGENT Materials laboratory needed for ASTM Testing in Geomembranes to ASTM D 1505 ASTM D 599 ASTM D 1004 ASTM D 4833 ASTM D 5596 . View More

Plastics laboratory needed for ASTM testing of plastic film and sheeting for water vapor using a modulated infrared sensor to ASTM F1249-13 test meth... View More

LONG-TERM TESTING Bioscience company needs bioanalytical laboratory for raw material, in-process, and final product MAT or cell-based endotoxins testi... View More

Polymer laboratory needed for ASTM testing for determination of Carbon Black in vinyl compound to ASTM D3349 , Standard Test Method for Absorption Coe... View More

Environmental toxicology laboratory needed for eco-toxicity testing on a pipe liner to be used in culverts in California. View More

Polymer laboratory needed for testing water vapors and oxygen gas permeability testing of new improvement in barrier of food packaging films made by b... View More

Materials laboratory needed for UV resistance testing in HDPE Corrugated Flexible Pipe used as an electrical conduit View More

Polymer laboratory needed forGas chromatography mass spectrometry GC-MS analysis to determine the organic purity of 2-Octyl cyanoacrylate monomer us... View More

Materials laboratory needed for ISO creep testing under compression as per ISO 8013, Rubber, vulcanized -- Determination of creep in compression or sh... View More

Polymer laboratory needed for measuring the vapor pressure of some poly(ethylene glycol)-substituted siloxanes to determine the vapor pressure at a fe... View More

Packaging company needs laboratory for overall migration limit testing on 8 different plastic products including shrink film and PET for the specific ... View More

Construction materials company for agriculture needs polymer laboratory to test content analysis of PVC View More

URGENT TESTING Polymer laboratory needed for certificate of analysis COA testing required on three polymer products used in waste water treatment. Te... View More

Medical Device company needs packaging laboratory for transportation simulation studies of polypropylene and polyethylene medical devices with a shelf... View More

Polymer laboratory needed for Fourier transform infrared spectroscopy (FTIR) analysis on a polypropylene product. View More

Petrochemical company needs laboratory for ASTM sand slurry testing for ultra-high-molecular-weight polyethylene UHMWPE per ASTM 4020 Standard Specifi... View More

New distillery needs laboratory for stability testing of alcoholic beverages in aluminum cans for the integrity of the water-based polymer lining of t... View More

Materials laboratory needed for comparison study of the Coefficient of Friction (COF) of two lubrication sticks according to BS EN - Annex L. View More

Packaging laboratory needed for ASTM testing to ASTM C868 Standard Test Method for Chemical Resistance of Protective Linings and ASTM D6677 Standard ... View More

Consumer products / textiles laboratory needed for polyester textile fiber testing for silicone composition. View More

University research scientist needs materials laboratory for tensile strength analysis of a biocompatible polymer nanocomposite. View More

Polymer laboratory needed for materials testing to Atex Zone 20, 21, and 22 directives for use of a polyurethane coating for use in multiple industrie... View More

LONG-TERM TESTING Plastics laboratory needed for ingredient analysis of recycled PET (RPET) for benzene, acetaldehyde, and limonene measurable in PPB. View More

Importer needs consumer products laboratory for FDA safety testing of silicone adult toys to ensure material meets all US safety requirements. View More

ISO 17025 certified analytical chemistry laboratory needed for OECD testing of phenol blocked polyisocyanate to the following OECD Guidelines for Ch... View More

INDIA snack food manufacturer needs packaging laboratory for package integrity testing of snack bar pouch which consists of three layer laminates incl... View More

Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure indus... View More

Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials f... View More

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperat... View More

Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. Th... View More

Packaging laboratory needed for child resistant packaging testing of plastic caps under CFR 16, Part 1700,Poison Prevention Packaging View More

LONG-TERM TESTING Plastics laboratory needed for acetaldehyde and viscosity testing of PET to 2 ASTM standards:
for acetaldehyde according ASTM F2013... View More

LONG-TERM TESTING Polymer laboratory needed for polyvinyl limit value testing on a variety of plastic formulations View More

Polymer laboratory needed for UV resistance / weathering testing to ISO-21898 of a standard polypropylene (plastic) jumbo bag for stone and iron ore. ... View More

Food packaging laboratory needed for FDA direct food contact compliance testing for compostable PLA foam products used in packaging of meats, fish, po... View More

Pharmaceutical packaging laboratory needed for USP testing of polypropylene vials as per USP 671 for moisture transmission rate and spectral transmiss... View More

Accredited materials laboratory needed for DIN EN testing of glass reinforced plastic part adhesives to DVS 1618/DIN 54457 test of lap shear strength ... View More

Large corporation needs materials laboratory for ASTM slip resistance testing of polymer and acrylic prototype bathroom tiles to ASTM 462, Standard Co... View More

Materials laboratory needed for polymer testing by gel permeation chromatography / size exclusive chromatography on polymer molecules with MW ranging ... View More

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Therm... View More

Polymer laboratory needed to identify composition of a gelatinous elastomer product and a coating product used for breast prostheses and other medical... View More

Construction materials laboratory needed for plastIcs testing for identification of additives in plastic pipes
View More

Plastics construction materials company needs laboratory for Solar Reflectance Index SRI measurement for LEED compliance to ASTM E1980 View More

Materials laboratory needed for development of fire retardant rubber products as per EN 4554 fire testing of materials and components for trains View More

Polymer laboratory requested for migration study of a resin used in food contact (packaging) materials. View More

Large corporation needs polymer laboratory needed for molecular weight distribution of natural rubber materials by light scattering detector and visco... View More

Materials laboratory needed for expanded rubber testing studies to three DIN EN ISO Standards:
- Coefficient of thermal conductivity according DIN EN... View More

Large company needs materials laboratory for identification testing of powder coating used in lining for valves. We believe that it is polypropylene b... View More

University Research Scientist needs analytical chemistry laboratory for polymer analysis by GPC Gel Permission Chromatography. View More

Materials laboratory needed for ASTM testing for thermal conductivity of nitrile rubber Insulation foam at 0, 20, and 40 Celcius to ASTM C 518 and AST... View More

ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standa... View More

Food toxicology laboratory needed for safety testing of polymers and polyethylene terephthalate (PET) used in food products. View More

Construction materials laboratory needed for bisphenol BPA testing in polypropylene sheets
View More

Polymer Laboratory needed for self-accelerating polymerization temperature SAPT testing to UN3532 United Nations Committee of Experts on the Transport... View More

Polymer company needs materials laboratory for ASTM Testing of sodium chloride ice-melt / deicing properties View More

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers ... View More

Automotive laboratory needed for VW-Audi plastics melamine resin foam testing for conformance to VW Audi requirements. View More

LONG TERM TESTING Plastics laboratory needed for chemical composition analysis for nitrogen content (should be theoretical N~1500 ppm) in 3 plastic pe... View More

Polymer laboratory needed for monomer coating testing after curing process to determine monomers left on garment after curing by LED UV printers and ... View More

LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeri... View More

Polymers laboratory needed for thermal, dielectric, and insulating testing for properties of two components polyurethane resin according to the follow... View More

Polymer laboratory needed for ASTM testing of flexible cell materials (ethafoam-180) to ASTM D3575 and ASTM D3576. View More

Materials laboratory needed for softening point and/or heat deflection point of several polyurethane based polymers. View More

University researcher needs polymer laboratory for gel permeation chromatography and transmission electron microscopy TEM of polypropylene based polym... View More

URGENT. Polymers laboratory needed for verification testing of the molecular weight of a Ultra-high-molecular-weight polyethylene (UHMWPE) polymer. View More

Polymers laboratory needed for brittleness temperature testing according to ASTM D746 ISO 974. View More

Polymers laboratory needed for testing thermoplastic products for strength, integrity, durability.

View More

Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on va... View More

Packaging laboratory needed for Plastics and Polymers testing of HDPE bottles for stack load stability testing and wall thickness View More

India materials laboratory needed for diaper testing:
1- measuring absorption under load(AUL)in diaper
2-the analysis method for monitoring distribu... View More

Toxicology Laboratory needed for REACH OECD polymer testing to OECD TG 118 (1996) method on phenolic syntans, melamine, dicyandiamide, naphthalene, ch... View More

Contract Laboratory needed for microscopy on polymers for comparisons with image & measurements obtained with a Laserlec Optilec H1200 confocal micro... View More

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and S... View More

Materials Laboratory needed for polymer testing for Toxic Substances Control Act TSCA exemption under rule 40 C.F.R. ยง 723.250, Polymers View More

India Materials laboratory needed for polymer testing of free monomers in polymers. Free monomers 1: Acrylic acid 2: sodium hydro sulfite in a product... View More

ISO 17025 Materials Laboratory needed for mechanical testing of polymers View More

Startup developing new polymer material for fibers and textile needs complete UV degradation tests wfor different polymers (before extrusion process, ... View More

United States materials laboratory needed for ASTM Testing of foam to ASTM D3575-BD, Standard Test Methods for Flexible Cellular Materials Made From O... View More

Polymer Laboratory needed for third-party testing of polymers View More

Europe Product safety Toxicology Laboratory needed for OECD toxicological testing eye irritation potential of four products with study design in accor... View More

Product Safety GLP Laboratory needed for OECD eye irritation potential of four products with study design in accordance with the OECD TG 405, EU Guide... View More

Packaging company needs West Coast polymer laboratory for polymer testing to test Amount of polymers in a wax cascading sample. View More

Plastics Laboratory needed for polymer composite testing to determine diffusion coefficient in compostes and polymers. View More

Northeastern USA FDA cGMP biomedical laboratory and toxicology laboratory needed for medical device prototype testing. Test sensor for responsiveness ... View More

University researcher needs Materials Laboratory for polymer testing of newly synthesized 05/29/1 polymers of nanocomposites of acrylonitrile.Polymer... View More

Polymer Laboratory needed for polymer testing. Test polymers for iodine number for unsaturation? Please specify what will be the cost for each sample?... View More

Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and pla... View More

Physical Chemistry Laboratory needed for OECD Biodegradability Testing for finely micronized insoluble in water wax polymers using either OECD 301B, 3... View More

Canada Polymer Laboratory needed for polymer verification for the NCO and OH levels verified in polymers View More

Weathering Laboratory needed for performance testing / weathering testing of exterior coating, based on Ordinary Portland Cement, polymers, fillers, ... View More

Europe or USA Materials Laboratory needed for polymer testing: comparative testing of radiopacity ASTM F640Comparative radiopacity to ASTM F640 testin... View More

India FDA GMP preclinical laboratory needed for preclinical studies. Ex-Vivo Study (Macrophage uptake studies , MTT and apoptosis assay for cytotoxici... View More

USA Polymer Laboratory needed for injection molding of six different polymers injection molded to ASTM D 543, Standard Practices for Evaluating the Re... View More

Environmental Toxicology Laboratory needed for OECD Environmental Toxicology Testing of enhanced oil recovery chemicals testing OECD 201 with ISO 1025... View More

Polymer Laboratory needed for polymer testing of polymer membranes for fuel cell research, and are looking for an analytical lab to measure proton co... View More

USA Plastics Laboratory needed for MALS Polymer Testing for measuring Intrinsic Viscosity and Molecular Weight of various polymers of hyaluronic acid ... View More

USA Analytical chemistry laboratory needed for polymer testing.Need Vapor Pressure tested on two liquid polymers. Need vapor pressure curves including... View More

Canada and USA Analytical Chemistry Laboraory needed for plastics/ rubber testing to ISO 13741-2:1998 (Plastics/rubber - Polymer dispersions and rubbe... View More

Middle East Polymer Laboratory needed for polymer testing: GPC-IR analysis on LLDPE (ethylene 1-hexene copolymers) samples to have the following resul... View More

Polymer Laboratory needed for polymers testing: Softening point & brookfiled viscosity at 120 deg C of polymer View More

Polymer Laboratory needed for polymer testing: thermal conductivity of polymer matrix composites and polymers? If so, 1. What kind of tests do you pe... View More

Food Laboratory needed for Food Packaging Testing,
Migration Testing for Food Contact Surfaces (polymers, adhesives, metals, lubricants, colorants, ... View More

USA Physical Laboratory needed for polymer testing at low temperature. stress-strain testing of polymers at -150C to establish stress-strain curve at... View More

USA Plastics and Polymers Laboratory needed for Hydrolytic Stability Testing of Polurethane View More

Plastics and Polymers Laboratory needed for ASTM Testing to measure melt flow rate for epoxy according to ASTM 1238-10 or ISO1133. View More

India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength. ... View More

Plastics and Polymers Laboratory needed for plastic testing of plastic part to 21CFR177.2410

View More

USA Polymer Laboratory needed for ASTM Testing ASTM D1159-98 Electrometric titration of 10 samples for bromine number. These are polymers in a soluti... View More

USA FDA GMP Analytical Chemistry Laboratory needed for FDD and FDA CFR 21 Identity testing of polymers for gum base View More

Materials Laboratory needed to Measure the contact angle of water with varying concentrations of surfactant on several plastics/polymers View More

Microbiology Laboratory needed for antimicrobial testing og (nonleaching) antimicrobial design polymers that want tested in flow cell against S. aureu... View More

USA Plastics and Polymers Laboratory needed for Mossbauer Spectroscopy analysis of Fe in recycled automobile tires materials." View More

Plastics and Polymers Laboratory needed for physical testing of polyester bands of width 5 to 10 cm and resistance in traction from 50 to 100 kN accor... View More

Malaysia Physical Laboratory needed for testing gas permeability of clear polymers. Samples approx 1mm to 3mm thick. View More

Asia Plastics and Polymers Laboratory needed for compatibility testing for CPVC sch 80 materials compatibility to 98% H2SO4. View More

USA GLP Environmental Laboratory need for biodegradation testing of 2-3 polymers by ISO 14855 or ASTM D6400. View More

Physical Laboratory needed to measure density of powder polymers. Please advise cost and how many grams of the sample is needed. View More

Hong Kong Analytical Chemistry Laboratory needed for GPC molecular weight analysis of silicone polymers View More

USA Analytical Chemistry Laboratory needed for analysis using GPC columns for two SEBS (styrene-ethylene-butylene-styrene)block copolymers of average ... View More

New Zealand Polymers Testing Laboratory needed for testing. View More

Pakistan Analytical Chemistry Laboratory needed to analyze chemistry of insoluble organic polymers. View More

Physical Laboratory needed to do pressure filter value testing for color master batches based on polymers like PP, PE, LLDPE etc. View More

New Zealand Plastics and Polymers Materials Laboratory needed for testing Thermoformer film approved for boil in the bag application being reheated du... View More

ASTMD, IDO laboratory to test polymers for the following:
1. Refractive index
2. Critical Surface Tension
3. Coefficient of linear expansion
4. Sp... View More

Asia Mechanical laboratory needed for ASTM Testing of PE pipes such as ASTM D1505, D1238, D790, D638, D1693, F1473, D2837, D746, D1603, D792, F74, D33... View More

Materials Laboratory needed for certification testing that polymers to be able to certify that they are latex and gluten free as well as other allerge... View More

USA FDA GLP Bioanalytical Laboratory needed for Gel permeation chromotagraphy.
We need to characterize the Mn (Molecular number), Mw (Molecular wei... View More

India Analytical Chemistry Laboratory needed to estimate molecular weight of water soluble polymer. Plastics and Polymers View More

Plastics and Polymers Laboratory needed for polyurethane testing wood floor to determine what finish was used. i.e. polyurethane or moisturecure View More

Asia Plastics and Polymers, Analytical Chemistry Laboratory needed to deformulate a material used as a seam sealant in textile application. Need to i... View More

USA Analytical Chemistry Laboratory required to Identify the film layers in a laminate of Nylon and Polyethylene
polymers. View More

Denmark ISO 10993 Bioanalytical Laboratory required for Biocompatibility package for implantable and biodegradable polymers View More

Plastics and Polymers Laboratory needed for radiopacity testing on silicone wound drains. Testing is to be performed on each production lot, ongoing b... View More

India Company needs ISO India Material Laboratory for GC/MS testing to I=identify different polymers used in the filament/ GC/MS View More

Texas Plastics/Materials Testing Laboratory needed for several plastic inj molded parts which need to have their respective grade,type, filler polymer... View More

Europe BS EN 1225 Plastics Laboratory needed to test biodegrability of plastics or polymers. View More

Eastern USA Analytical Chemistry Laboratory needed for fluorine NMR testing for fluorinated polymers in solution. View More

Europe Plastics and Polymers Laboratory needed for standard Luposol Stress Crack Testing on plastic parts injected in PE-HD for the automotive industr... View More

India Analytical Chemistry Laboratory needed to identify the granules of polymers identify the granules View More

Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis... View More

USA MAterials Laboratory needed to test materials compatibility and/or degradation of new materials being developed for elctrochemical sensors, especi... View More

India Materials Laboratory needed for Rheological analysis of water soluble polymers. Storage and loss modulus at different temperature. View More

USA Analytical Chemistry Lab needed for ICP-AES testing for ASH content of polymers and dilution with HCl View More

Large Medical Device Mfg needs USA Plastics and Polymers, Radiochemistry Lab for ASTM Testing: ASTM F640-07 "Determining Radiopacity for Medical Use" ... View More

GLP Analytical Chemistry laboratory needed for determination of the composition of nitrogen fertilizers and fluorinated polymers for registration in E... View More

Analytical chemistry laboratory needed for QA/AC test on polymers - GPC, titration, NMR, ICP, ICP-MS, GC-MS, IC, HPLC, TGA, KF, total solids View More

Microbiology Laboratory needed for Microbiological testing for solid surfaces, including polymers, plastics and textiles. Test types include Survival... View More

Analytical laboratory needed for biodegradability testing(up to 20 days)on 2 water soluble polymers. View More

Materials laboratory needed for testing polymers View More

Materials laboratory needed for GPC (SEC) analysis testing of low molecular weight (organic-soluble; e.g. chloroform, THF) polymers including polydime... View More

Analytical chemistry laboratory needed for polymer identificaiton testing on hmhdpe film rolls that seem to be co extruded or laminated other polymers... View More

Physical laboratory needed for testing composition of 2 different copolymers and provide recommendations for additives or alterations to achieve diff... View More

Analytical chemistry laboratory needed for MALDI-TOF MS analysis of synthetic oligomers and polymers. View More

Analytical Chemistry laboratories needed for FT-IR & UV visible spectrophotometry testing on polymers. View More

Materials laboratory needed for GPC analysis of n-isopropylacrylamide polymers (aqueous systems) View More

Laboratory needed for testing plastic/polymers for Molecular Weight Distribution View More

determine the charge density of water soluble cationic polymers View More

Laboratory to conduct physico - chemical properties for polymers View More

Analytical Chemistry laboratory needed for analysis of medical rubber stoppers that mixed with natural rubberf or contaminate natural rubber and also ... View More

Viscoelastic characterization of polymers -DMA frequency scans in the tensile mode, at multiple temperatures (about 10 temps - 5 above Tg and 5 below)... View More

Need ISO 17025 lab to test polyester polymers for trace levels of antimony (<100 ppm)using AA and for bromine using XFS. Must perform tests using AA ... View More