Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
MULTIPLE TESTING
We are looking to conduct the following FDA-required tests as part of our 510(k) submission for a personal lubricant product (21 Accepting Quotes
Contract Laboratory needed for Rubber Hose Pressure Cycle Testing for 100,000 Cycles. The Rubber Hose has multiple bends
Building materials testing laboratory needed for sound absorption testing rubber tiles.
MULTIPLE PRODUCTS
Contract Laboratory needed for identification of the molecular structure of EPDM rubber gasket material that was used on the railcar hatch pla...
Consumer products laboratory needed for ASTM D 7661-10 testing - Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms. P...
USA Polymer Laboratory needed for 21 CFR 177.2600 compliance testing of cured silicone rubber samples.
Can you provide a quote and turnaround time?
Thanks!
URGENT
Independent material testing facility needed to test a 316L (low carbon) stainless steel dowel pin for the presence of natural rubber latex, per ASTM D6499 (Standard T...
MULTIPLE PRODUCTS
Contract laboratory needed for mixing and preparing the following silicone polymers for optimal quality silicone in parts per hundred resin/rubber (PHR):
...
Third-party consumer products testing laboratory (Italy-based, preferred) needed for testing condom product compatibility according to ISO 19671:2018 (Additional lubricants fo...
URGENT
USA Material testing laboratory needed for individual testing sieve residue using ASTM method D1514 for recycled recovered carbon black (rCB) pellets.
Material testing facility needed for testing Dissolved organic carbon (DOC) in rubber granules per the NF EN 1484 method (Water analysis - Guidelines for the determination of ...
MULTIPLE TESTING
Independent lab instruments testing facility needed to provide extractability & leachability data (including potential toxicity) of silicone rubber tube & on...
Consumer products testing laboratory needed for testing ISO 19671:2018 standard: Additional lubricants for male natural rubber latex condoms - Effect on condom strength.
Can...
MULTIPLE TESTING
MULTIPLE SAMPLES
USA Third-party material testing laboratory needed to:
- Quantify/speciate gaseous sulfur/nitrogen impurities in our kiln off-gas via gas...
Contract laboratory needed to test personal lubricant sample according to the ISO 19671 (Additional lubricants for male natural rubber latex condoms?Effect on condom strength)...
MULTIPLE PRODUCTS
Contract Laboratory needed for Ozon Exposure Testing on rubber and plastic samples ; 100 ppm to 150 ppm by volume, for 2 hours; 9 samples
(Size Max. 75 x ...
Polymer Laboratory needed to perform the relevant ASTM tests (i.e ASTM D6814-02 and / or ASTM D 297-15.) to measure the percentage of devulcanization of a polymer (i.e the r...
CONSUMER
Consumer would like to test an unidentified recycled plastic/polymer/vinyl mulch that is used at a playground (instead of wood chips or rubber). I would like to anal...
Contract Laboratory needed for chemical composition testing of a silicon rubber sample. Our objective is to acquire as much information as possible to make sure we buy more of...
Contract Laboratory needed for ASTM testing of a new rubber formulation that needs to be tested based on ASTM D945 Standard Test Methods for Rubber Properties in Compression o...
Medical Device Laboratory needed for testing to ASTM D7661 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
Contract Laboratory needed for silicon fabric ASTM and AMS certification testing to certify it meet AMS 3320 SILICONE RUBBER SHEET - GLASS FABRIC (TYPES 162 AND 164) REINFORCE...
Contract Laboratory needed for ASM and ASTM Testing of a silicone elastomer sheet to the following standards:
AMS 3320 SILICONE RUBBER SHEET - GLASS FABRIC (TYPES 162 AND 1...
POLYMER LABORATORY NEEDED TO PERFORM RGD (RAPID GAS DICOMPRESSION) OR ED (EXPLOSIVE DECOMPRESSION TESTING) FOR A RUBBER PART.
Materials Laboratory needed for material testing for 3 different rubber flex couplings. The couplings are a soft rubber tube with a hard plastic sleeve over the center of the ...
MULTIPLE TESTING
Contract Laboratory needed for ASTM Testing to the folloing ASTM Test Standards:
ASTM D-2240 Standard Test Method for Rubber Property?Durometer Hardness
AS...
Contract Laboratory needed for 4 x pyro-GCMS of tyre wear particles (rubber-based microplastics with inclusions) and dust swept off roads
Specialty Vehicles Company needs USA Laboratory for identification of a chemical composition analysis on an unknown substance that was found alternators which failed inside ...
UK LABORATORY
MULTIPLE TESTING
Contract Materials Laboratory needed for elemental composition, size distribution, density, surface area and other material properties testing...
MULTIPLE TESTING
Large Corporation needs Polymer Laboratory for ASTM tensile strength, elongation-at-break and modulus testing of 80 dumbbell elastomer specimens under TS297...
MULTIPLE PRODUCTS
Contract Analytical Laboratory needed for Persistent Organic Pollutants (POP) testing in automotive rubber parts.
Please share quotation
URGENT
LONG TERM TESTING ...
USA LABORATORY
MULTIPLE TESTING
USA Medical Device Laboratory needed for ISO Condom Compatibility Testing to ISO 4074 natural rubber latex condom compatibility with our nove...
Construction Materials Laboratory needed for ISO performance testing of adhesives to determine how it works when applied to vinyl floor. Laboratory would need to test accord...
LABORATORY NEEDS LABORATORY SUPPLIER TO QUOTE ON SUPPLYING THE FOLLOWING FOR THEM:
LADDER,11932,22MM,LATEX RBR,2L,GS COLTN TYPE : - DIMENSION SIZE : 22 MM MATERIAL : LATEX RU...
MULTIPLE PRODUCTS
Mechanical Laboratory needed for Compression and Load Comparison Testing on two different material types making a plastic liner on the surface of a composit...
USA LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for new hose product in both 3/8 and 1/2 style hoses testing for performance.
3/8 ID: 9 samples
1/2 ID: 9 sam...
MIDDLE EASTERN LABORATORY (Egypt preferred)
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for hazardous waste materials testing to audit within Basil conven...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Materials Laboratory needed for different thickness rubber wet pour samples testing to determine fall height they are each designed for.
Consumer Products Laboratory needed for testing footwear product for slip resistance according to ASTM F1677.
USA LABORATORY (Houston, TX)
Contract Laboratory needed for testing small scale rubber mixing (50-100 gms). What will be the charge per mixing?
MULTIPLE TESTING
USA Product Safety Laboratory needed for multiple studies on personal lubricant including Biocompatibility, Condom Compatibility and Antiviral study
Biocomp...
MULTIPLE TESTING
Contract Laboratory Wastewater biological and chemical components testing from water from a chicken processing plant to determine the chemical profile of the...
Physical Laboratory needed for physical properties for one or more grades of N-Buna Nitrile rubber at various sample temperatures.
Contract Laboratory needed for chemical composition and identification testing of glue which we got stuck between aluminium casting body which gets heated in operation and a r...
Contract Laboratory needed for radiation resistance testing on our rubber specimen. Required radiation is 100RAD gamma source 300kV.
If you can perform this, please let me...
EUROPE LABORATORY
MULTIPLE PRODUCTS
Europe Contract Laboratory needed for rubber gasket testing for gaskets used for pipe lines in Drinking water and waste water.
Contract Laboratory needed for SAE testing according to SAE J2979 Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests