Most Recent physical Laboratory Test Requests

Contract Laboratory has received the following physical Laboratory Test Requests which need to be fulfilled! These physical Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their physical Laboratory Test and Scientific Research. If you need a physical Laboratory, please Submit a physical Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

PVC Tubes Comparison Study

Description:

Laboratory needed for comparison study of the mechanical and physical properties of several different PVC extruded tubes for urometer, column strength, elasticity, tensile strength, crush and to the extent possible, chemical composition.

View More


Title:

Stress Relief Testing

Description:

Large Industrial Company needs Physical Laboratory for stress relief testing not exceeding 4% per 1000h at initial force making 70% of maximum force corresponding to ultimate tensile strength.

View More


Title:

Packing Tape Testing

Description:

Physical Laboratory needed for biaxial oriented polypropylene (BOPP) tape testing

View More


Title:

Physical and Chemical Properties Testing

Description:

LONG-TERM TESTING Healthcare Company needs Laboratory for physical and chemical properties testing of a variety of products including ointment, tinctures, oils, salves, creams, etc..The information and tests we are looking to be conducted are:

Ap...

View More


Title:

ASTM Metals Thermal Conductivity Testing

Description:

LONG-TERM TESTING Industrial Laboratory needed for thermal conductivity testing by laser flash method for metals as per standard ASTM: E1461-13. Thermal conductivity and thermal diffusivity are the most important thermophysical material parameters for cha...

View More


Title:

Polycarbonate Evaluation

Description:

Polymer Laboratory needed for physical testing of Polycarbonate PC extruded sheets including UV, etc.

View More


Title:

Crude Oil Physical Properties

Description:

Oil Laboratory needed for physical properties testing of crude oil including
1-Crude oil API & Specific gravity.
2-Crude oil salt content.
3-crude oil sulfur content.
4-crude oil Bs & W(i.e Basic sediments and water/ centrifugal.
5-crude oil vis...

View More


Title:

Phosphate Rock Derivatives Analysis

Description:

LONG-TERM TESTING Geotechnical Laboratory needed for geochemical and geophysical testing of phosphate rock and its derivatives such as Phosphoric Acid, fertilizers and animal feed.

View More


Title:

Waterproofing Testing

Description:

Materials Laboratory needed for ASTM testing of EPDM rubber waterproofing membrane based on ASTM D4637(Type I) requirements

View More


Title:

Performance Verification Testing

Description:

Performance Test Laboratory needed to verify the physical performance of spirometer as per ATS/ERS guideline: Standardisation of spirometer,

View More


Title:

Soil Testing for Geological Survey

Description:

Environmental Laboratory needed for soil testing as part of a geological survey including the following tests.

1. Laboratory tests of determination of physical and mechanical proerties Parameter Specific gravity Bulk density Dry density Porosity Void ...

View More


Title:

Automotive powder coating Testing

Description:

Automotive Industrial Laboratory needed for physical testing of powder coated metal according Ford WSS-M2P190-A
Interior painted part of handbrake including
3.4.6 FLTM BN 107-01 Cure test
3.5 FLTM BN 155-01 Abrasion and paint wear resistance
3.4.9 FLT...

View More


Title:

ISO Fishing Net Testing

Description:

Physical Laboratory needed for ISO Abrasion resistance and durability tests for Fishing nets as per ISO 1805:2006 Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002 and Fishing nets -- Determination of breaking force and knot br...

View More


Title:

ISO Medical Device IV Injection Testing

Description:

Medical device manufacturer seeking testing compliant with ISO 15747:2010, Plastic containers for intravenous injections relating to safe handling and the physical, chemical, and biological testing of plastic containers for parenterals. Please inquire fo...

Requirements:

ISO 15747: 2010, Plastic containers for intravenous injections.

View More


Description:

Leather Goods Manufacturer needs Physical Laboratory for cut and puncture testing on leather gloves.

View More


Title:

Car Canopy Frame Testing

Description:

Physical Laboratory needed for joint testing for a car canopy space frame that is made using new joining method. Testing to be similiar to the type of tests a new welding practice or type of bolt would need to be in order to be approved for construction ...

View More


Description:

Physical Laboratory needed for ASTM Testing of phenol impregnated glass fiber cloth to (ASTM 297, sandwich tensile test).

View More


Description:

Materials Laboratory needed for physical testing of VHB tapes for strength, durability, aging, and resistance to temperature

View More


Description:

Materials Laboratory needed for physical properties testing of adhesive transparent tape used in mattresses including thickness of adhesive coating,core thickness,peel strength,film thickness,width

View More


Description:

Construction Laboratory needed for ANSI dry grout physical testing to two ANSI Standards 118.3 Latex Fortified Cement Based Grout: and 118.4 Modified Dry Set Cement Mortar. for dry mortar

View More


Description:

Materials Laboratory needed for textile testing to AATCC and ASTM testing methods including tear strength, chlorine residue, dimensional stability, etc.

Requirements:

Tear strength, chlorine residue, dimensional stability, etc.

View More


Description:

Physical Laboratory needed for UL555 Fire Damper Test and UL555S Smoke Damper Test

Requirements:

Confidential

View More


Description:

Large Manufacturer needs A2LA Materials Laboratory for ASTM Materials Testing to following ASTM Test Methods:
ASTM D695 Compressive strength,
ASTM D2990 Resistance to creep, ASTM E328 Stress relaxation properties

View More


Description:

LONG-TERM TESTING Physical Laboratory needed for ISO tear and cut resistance testing to ISO Standards: ISO EN388:16 clause 6.4 for tear resistance
ISO EN388:16 clause 6.3 for cut resistance (following EN ISO 13997 procedure)

View More


Description:

Automotive Laboratory needed for ISO passenger car alloy wheels testing to the following ISO Standards:
- Radial Fatigue test ISO 3006/2005
- Corning Fatigue test ISO 3006/2005
- Impact Test GSO ISO 7141/2008

Requirements:

Passenger car Alloy wheels testing:
- Radial Fatigue test ISO 3006/2005
- Corning Fatigue test ISO 3006/2005
- Impact Test GSO ISO 7141/2008

View More


Description:

Automotive Laboratory needed for Toyota TSF0900G 6.2.13 Air Permeability testing to find the air flow rate at 124.5 Pa pressure and report it in L/cm²/s

View More


Description:

Physical laboratory needed for OSHA testing verify heights and weights/limatations to OSHA 1926.701b
Testing U-Posts, T,Posts and Rebar. I would like a test performed dropping a 250lb bag of sand 3',5',8', and 10' also the same using a 200lb bag of san...

Requirements:



View More


Description:

Pharmaceutical Analytical Chemistry Laboratory needed for conducting studies on the Active Pharmaceutical Ingredients APIs in an oil in water emulsion. We need to arrive at following conclusions by morphological/physical/chemical testing etc

1. Wh...

View More


Description:

Physical Laboratory needed for dimensional testing of pre-mold straight joings and pre-termination kits - 8.7/15 kV 3 core x 400sq mm Pre-Mold straight joints 2) 8.7/15 kV 3 core x 400sq mm Pre- Termination KitsPre- Termination Kits

View More


Description:

Physical Laboratory needed for nut chipping testing using SAE J400 equipment of non-wovens.

View More


Description:

Pharmaceutical company needs laboratory for particle size testing of microcrystalline cellulose by air jet.

View More


Description:

Large Pharma needs polymer laboratory to study and develop new blends of polymers including the characterization (mechanical, physical) of the produced blends and supply of samples.

Requirements:

Extrusion, molding, mechanical testing of polymers.

View More


Description:

Large petfood company needs experienced and accredited laboratory for the characterization of particle size, especially the % of particles with size smaller than 100nm in powder materials by Electron Microscopy.

View More


Description:

Medical device laboratory needed for physical testing of transfusion sets to the physical requirements of ISO 1135-4, Transfusion equipment for medical use -- Part 4: Transfusion sets for single use, gravity feed

View More


Description:

Materials laboratory needed for ASTM Testing of plastics to ASTM D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep, Rupture of Fiberglass Reinforced Plastics.

Requirements:

Conduct a test for Fiberglass Reinforced Plastic

View More


Description:

Medical device laboratory needed for drug compatiblity testing and testing of parenteral IV containers to ISO 15747:2010 which contains requirements that relate to the safe handling and the physical, chemical and biological testing of plastic containers f...

Requirements:

ISO 15747:2010

View More


Description:

Large corporation needs physical laboratory for failure analysis of injection molded waterproof housing submitted to a leak test, t. It has been observed that air bubbles are coming out at some locations that coincide with a knit line, there is a theory...

Requirements:

x-ray and cross section, and test results report.

View More


Description:

Electrical laboratory needed for thermal cycling test for electronic boards, about 5 x 10 cm in size

View More


Description:

Metals laboratory needed for destructive testing of stainless steel tie down fixture, two component estimated break of the weakest link 30,000 Lbs. of pull. Multiple testing angles (adjustable base must be designed to support the test). Test device at v...

Requirements:

Machine must have a vertical clearance of 11 inches for the fixture and the base combined. The top has a standard 20mm "eye" to pull from, the base is a 1" thick, 9" round stainless casting.

View More


Description:

URGENT Large company needs physical laboratory for environmental simulation testing of 2 pallets of products. Laboratory must have walk in environmental chamber capable of handling 2 pallets 42x42x48 to cycle for 3 weeks between 95%RH, 95% and 20%RH, 70F

View More


Description:

Physical laboratory needed for SAE testing on fuel lines to SAE J2027 Standard for Protective Covers for Gasoline Fuel Line Tubing

View More


Description:

Laboratory needed to measure thermo-physical properties of fuel additive mixtures containing ethylene, vinyl acetate and cyclohexane. Properties to measure include: critical point determination, viscosity of mixtures, density of mixtures, vapour pressure...

View More


Description:

Physical laboratory needed for flame retardant testing to Information Technology Industry Council. standard 'M1', Biometrics

View More


Description:

Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durability in accordance with the following standards:

-AC320 (an acceptance criteria from ICC)
-Condition...

Requirements:

Laboratory must have experience of ASTM D 2247 and ASTM C 581 and also tensile testing of very strong smooth FRP bars

View More


Description:

FDA GMP medical device laboratory needed for testing to support FDA 510(k) based on FDA-recognized consensus standards: 3-80 AAMI ANSI ISO 81060-1:2007/(R)2013 - Non-Invasive Sphygmomanometers - Part 1: Requirements And Test Methods For Non-Automated Meas...

Requirements:

Purpose: FDA 510(k) Medical Device Premarket Notification

View More


Description:

LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordance with ASTM D 3330, Method A for 3M 250 flat back tape.

Requirements:

We would need certificate of conformance and testing every 3 months to extend tape shelf life from 12 months up to 2 years.

View More


Description:

URGENT Physical laboratory needed for ASTM composite testing to test method of ASTM E 756: Vibration Dampening Testing

The testing sample will be a 2-4 mm thick non-ferrous metal composite material.

Requirements:

***IMPORTANT: NOTE If you can perform this test, please respond with

1. Size of the sample that you will require,
2. The date when you will need the samples by,
3. Price/Quotation of the test
4. Duration of the test.

View More


Description:

Physical laboratory needed for basic drop/vibration ISTA testing of a lamp packaging in single parcel - 16.

View More


Description:

Physical laboratory needed for EN fire safety testing (90min) for storage cabinets as per EN 14470, European
Standard for Safety Storage
Cabinets

View More


Description:

Packaging laboratory needed for ASTM testing to ASTM C868 Standard Test Method for Chemical Resistance of Protective Linings and ASTM D6677 Standard Test Method for Evaluating Adhesion by Knife

View More


Description:

URGENT Large corporation needs automotive laboratory for UN testing of coating tint used on windscreen/windshield to ISO 3537 Headform testing for automotive windscreen/windshield or UNECE R43, Uniform provisions concerning the approval of safety glazing ...

View More


Description:

Building company needs construction materials laboratory for waterproof / resistance testing on windows.

View More


Description:

LONG-TERM TESTING Physical laboratory needed for ASTM flammability testing of paint to ASTM D822 Open-Flame Carbon-Arc Exposures of Paint and Related Coatings, test to four 4x6 samples.

Requirements:

Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

View More


Description:

Medical device laboratory needed for physical ASTM testing of a range of titanium surgical-grade products to the following ASTM Standards: ASTM F2052 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magneti...

View More


Description:

Orthopedics medical device laboratory needed for physical certification testing of prosthetic devices to ISO10328 (Prosthetics - Structural) for a lower limb prosthesis

Requirements:

ISO10328

View More


Description:

Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of motor vehicles

View More


Description:

Medical Device Laboratory needed for microbiology and physical testing of medical drapes and surgical gowns to several EN ISO standards:
1. EN ISO 22612 Resistance to Microbial Penetration - Dry,
2. EN ISO 22610 Resistance to Microbial...

View More


Description:

Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure industry. The textiles are used in products that have a life expectancy of 20 years and need weathering verif...

View More


Description:

Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials for sewerdrains - Jointing materials for prefabricated parts of concrete, requirements, testing and proces...

Requirements:

Root Penetration

View More


Description:

Large company needs medical device laboratory needed for ASTM testing of 4 orthopedic products including metallic medical bone screws, metallic angled orthopedic fracture fixation device, external skeletal fixation device, and metallic bone plates to ASTM...

Requirements:

1. ASTM F543 Annex A1, A2, A3 (Metallic medical bone screws),
2. ASTM F384 Annex A1, A2 (Metallic angled orthopedic fracture fixation devices),
3. ASTM F1541 Annex A5 (External skeletal fixation devices),
4. ASTM F382 Annex A1, A2 (Metallic bone plates...

View More


Description:

Packaging laboratory needed for various ASTM and ISTA testing of engineered parts packaging including 1) Free drop : Reference Specifications: ASTM D 5276 and ISTA 2A
2) Vibration : Reference Specifications: ASTM D 4728 and ISTA 2A
3) Shock : Free fall ...

View More


Description:

Packaging laboratory needed for child resistant packaging testing of plastic caps under CFR 16, Part 1700,Poison Prevention Packaging

View More


Description:

ISO / IEC 17025 Accredited consumer product laboratory needed for safety equipment testing to EN and KS standards including:
Particle filter testing as per EN 143
Filtering half masks testing as per EN 149
Ear muffs testing as per KS 2093

View More


Description:

Accredited materials laboratory needed for DIN EN testing of glass reinforced plastic part adhesives to DVS 1618/DIN 54457 test of lap shear strength according to DIN EN 1465, drum peel test according to DIN EN 1372

View More


Description:

Medical device / materials laboratory needed for ASTM testing of personal protective equipment / gloves to ASTMF2878-10 (Needle Stick Test)

View More


Description:

Consumer Products Safety Laboratory needed for FDA sunglasses safety testing by drop ball test method to Standard LT-1 July 12, 1971 21 CFR 801, 410 MIL-STD-105.

Requirements:

Sunglasses Association of America Standard LT-1 July 12, 1971
21 CFR 801, 410
MIL-STD-105

View More


Description:

Large corporation needs mechanical laboratory for torque testing 65 mm socket wrenches with a 3/4 drive for torsional impact to be rated for impact wrench use. The torque spec for the application is 700 lb-ft, and impact wrenches used on these tools coul...

Requirements:

The torque spec for the application is 700 lbft, and impact wrenches used on these tools could be rated up to 1,350 lbft in reverse.

View More


Description:

Materials laboratory needed for ASTM testing of grease / lubricant for carbon residue. Reference samples as per MRC Test / ASTM D-4530, Low Carbon 0.3 %c

View More


Description:

Automotive laboratory needed for four point ball bearing testing of new race car ball bearing for life of bearing, coefficient of friction, alloy of metal to produce a better product

View More


Description:

Product safety laboratory needed for ANSI testing of ladder levelers to ANSI 14.8-2013 (Safety Requirements for Ladder Accessories).

View More


Description:

Plastics construction materials company needs laboratory for Solar Reflectance Index SRI measurement for LEED compliance to ASTM E1980

Requirements:

My understanding is that this is under the standard of ASTM E1980, but would need clarification

View More


Description:

Materials laboratory needed for expanded rubber testing studies to three DIN EN ISO Standards:
- Coefficient of thermal conductivity according DIN EN ISO 8497,
- Water vapor diffusion resistance factor according DIN EN ISO 12086
- Fire behavior accor...

Requirements:

Material: Expanded rubber

View More


Description:

UK geology laboratory needed for clay testing for suitability for end uses as clay bricks, tiles, ceramics etc. Scope of testing to include:

Stage 1

An initial gradient firing on each borehole material (10 samples) to determine the firing temperatu...

Requirements:

If you are only able to complete some of the scope or would use different test methods then please quote on that basis.

View More


Description:

University researcher needs physical laboratory for doppler radar vibration measurement of sensor, receiver and software to model the receiving data and any other related components.

View More


Description:

LONG-TERM TESTING Lighting manufacturer needs physical laboratory for SAE and NFPA certification testing of LED lighting products to SAE J595, SAE J845, California Title 13, NFPA 1901-2009, KKK-A-1822F

View More


Description:

LONG-TERM TESTING Pharmaceutical company needs physical chemistry laboratory for particle size analysis of bulk drug active pharmaceutical ingredient (API) using Malvern 2000 or 3000 (laser technique).

Requirements:

Particle size analysis by Malvern 2000 or 3000 instrument (Laser technique).

View More


Description:

Automotive parts company needs physical materials laboratory for ASTM flammability testing to ASTM D6668 - 01(2016) Standard Test Method for Discrimination Between Flammability Ratings of F=0 and F=1

View More


Description:

Medical Device company needs physical chemistry laboratory for surface tension and surface energy testing

View More


Description:

ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standard methods: OECD107 Partition Coefficient (n-octanol/water): shake flask method , OECD 117 Partition Coef...

Requirements:

Required by customer

View More


Description:

Large company needs laboratory for UL Tilt Test - UL certification for custom kiosks means the stability of the units. These tests are known as the slide test, force stability test and 10 degree status tip static tip stability test. The tests are baseli...

Requirements:

This force and tip test use to be covered under a variety of UL standards: 291, 962, 2305 and/or 2361. However many of these standards have been rewritten and deleted based upon UL legal review and revision. I don't know the new UL standard for the forc...

View More


Description:

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers specifications WSS-M2D496 (Ford), GMW 14196 (General Motors), MS-AY-549 (Chrysler-Fiat) including:
WSS-M...

View More


Description:

Packaging laboratory needed for physical testing of pharmaceutical corrugated shippers including burst strength, compression strength, and moisture content

Requirements:

Burst strength, compression strength and moisture content.

View More


Description:

LONG-TERM TESTING Pharmaceutical analytical laboratory needed for in vitro release testing & physical characterization (viscosity and rheology) for drugs in solid oral dosage form.

Requirements:

These studies are as part of R&D only.

View More


Description:

Large electronics company needs product safety laboratory for fall hazard, structural integrity / physical stability / product safety testing of a commercial product to ensure it does not present "fall" or "tilt" hazard.

Requirements:

Dallas Fort Worth location

View More


Description:

Sensory laboratory needed for tactile, tactile experience, and touch testing of leather.

View More


Description:

Materials laboratory needed for NATO STANAG Testing of gun cases for dry heat, low temperature, impact, and vibration testing according to STANAG 4280 to meet NATO approval for gun carrying cases.

View More


Description:

Packaging laboratory needed for physical testing of corrugated box for burst strength and edge crush tests.

View More


Description:

Polymer laboratory needed for nondestructive NDT Testing: heat resistance testing of an acrylic lens according to IWA MIL-PRF-5425. Also, need physical properties such as elongation, tensile strength testing of O-rings made out of 51+/-5 durometer EP rubb...

Requirements:

WILL SEND YOU SOME SAMPLES OF BOTH WITH COPIES OF THE DRAWINGS AND PROVIDED MATERIAL CERTS AND HAVE YOUR COMPANY VERIFY AND CERTIFY THE CORRECT MATERIAL USED.

View More


Description:

FDA GMP laboratory needed for USP testing of length and length distribution of purified cotton fiber to USP <691> for large international healthcare company.

Requirements:

GMP laboratory required with appropriate documentation

View More


Description:

Physical laboratory needed for mechanical durability testing of industrial glass tubes.

View More


Description:

Automotive laboratory needed for mechanical testing to General Motors A/C hose pressure standards.

View More


Description:

Food laboratory needed for particle size analysis; milling of organic salts into <100 microns.

Requirements:

Capable of analyzing particle size

View More


Description:

Packaging / plastics laboratory needed for neck leakage testing of HDPE plastics bottles in different sizes.

View More


Description:

Physical chemistry laboratory needed for OECD testing to OECD Test No.123 Partition Coefficient (1-Octanol/Water): slow-stirring method or shake flask method.

View More


Description:

Consumer product laboratory needed for physical testing of baby pacifier clip for length, Impact resistance, durability of the garment fastener, and tensile strength.

Requirements:

Section 5.1.6 Length
Section 5.2.1 Impact resistance
Section 5.2.2 Durability of the garment fastener; and
Section 5.2.3 Tensile strength.

View More


Description:

Aerospace company needs materials laboratory needed for polymer testing for the dielectric strength in cured poly-sulfide rubber.

View More


Description:

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 61810 or 60255 standards

Requirements:

Performance testing, Environmental testing and EMC testing as per IEC 61810 or 60255 standards

View More


Description:

NABL materials laboratory needed for rubber rheology testing of optimum cure time & temperature of a liquid silicone rubber using a rheometer.

Requirements:

NABL accredited
India laboratory preferred

View More


Description:

Medical Device Laboratory needed for Acoustics and Bench Testing:  Sound Velocity, Acoustic Impedence, Sound Attenuation; Physical Measurements:  Viscosity, and Density of ultrasound gel

View More


Description:

Cosmetic / Consumer Products laboratory needed for product analysis testing of a hair product.

Requirements:

Must be in OMAN.

View More


Description:

Materials Laboratory needed for testing on a steel grade silica ceramic blanket.

Flammability to ASTM F 1462.

Thermal Conductivity to ASTM C518-19983.

Thermal Shock Resistance to ASTM D-30324.

Chemical Sustainability to ASTM D-6455.

Min...

Requirements:

India preferred.

View More


Description:

URGENT. Polymers laboratory needed for verification testing of the molecular weight of a Ultra-high-molecular-weight polyethylene (UHMWPE) polymer.

Requirements:

India preferred.
Molecular count testing in the samples provided.

View More


Description:

Physical chemistry laboratory needed for flash point testing of petroleum products in the temperature range from 40C to 370C by a manual Pensky-Martens Closed Cup Tester or an automated Pensky-Martens closed-cup apparatus.

Requirements:

Pensky-Martens Closed Cup Tester

View More


Description:

Materials (textiles) laboratory needed for protective clothing testing to check the cut resistance of protective textiles to ASTM 2992 or F1790 using TDM 100 cut machine.

Requirements:

Test method ASTM F2992 or F1790 using TDM100 cut machine.

View More


Description:

Physical laboratory needed for DIN Testing of automotive parts to 5.9 Solar Radiation Test as per DIN 75220, D-OUT-F
Test duration 1 cycle = 240 hrs.
Test chamber temp = 42 oC, RH 65 %
Radiatlon intensity 1000 W/m2
Visual evaluation
5.10 Dust Te...

View More


Description:

LONG-TERM TESTING Laboratory needed for ongoing and yearly proof testing of various hose assemblies to IAW SAE J2064 using an inert gas and cleanliness testing IAW SAE J2064 testing of various hose assemblies for HVAC units for vehicles.

Requirements:

ongoing and yearly testing of various hose assemblies, testing up to 175 times throughout the year, varying from 4 - 8 different part numbers. Hose sizes will vary from #6 to #14 & lengths will vary from 15" to 36".

View More


Description:

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

View More


Description:

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM D4976 + ASTM D5203, density, melt flow rate, elongation at break, tensile strength, UV resistance, stres...

Requirements:

-

View More


Description:

Aviation laboratory needed for performing the following tests:

ASTM-D-1149, test for ozone cracking of vulcanized rubber

FED-STD 191, weathering resistance of cloth

Method 5804, accelerated weathering method

Weatherometer testing with 7pphm SO...

Requirements:

Weatherometer testing with 7pphm SO2 and 10pphm O3.

View More


Description:

Pharmaceutical company needs Analytical Chemistry Laboratory needed for water vapor transmission testing for drug product.

View More


Description:

Physical Laboratory needed for pressure drop and CFM airflow testing on HVAC cold air returns.

View More


Description:

Motor oil laboratory needed for JASO T903 (DFI, STI, etc.) testing of automotive oil.

Requirements:

Automotive Engine Oil Testing
JASO T903 Tests (DFI, STI etc)

View More


Description:

Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additi...

Requirements:

Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additional polymer (which may also be a polyacrylate), water and at least two more non-polymeric materials. The mixture will be sen...

View More


Description:

Materials Laboratory needed for ASTM Tensile and ELongation Testing to ASTM D1055-09, Standard Specifications for Flexible Cellular Materials-Latex Foam

Requirements:

Tensile and Elongation

View More


Description:

Environmental simulation laboratory needed for accelerated weathering testing of a mini-installation of a playground made from glued playground tiles. Weathering simulation should include water submersion to simulate outdoor exposure to weather.

Requirements:

Need an oven and a freezer large enough to hold a platform "mini installation" of 4 of our 2-foot by 2-foot playground tiles as they are glued together during installation. Also would need a way to submerge the samples, or at least get them very wet (to ...

View More


Description:

Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

Requirements:

SAE J575
India testing facility preferred

View More


Description:

Packaging laboratory needed for complete packaging testing of 7 SKU's of products including: material testing, and benchmark packaging
Bottles: Drop test, seepage test, topload test
Caps: Capping force test, torque test
Labels: Fadeometer test, chambe...

Requirements:

Bottles: Drop test, seepage test, topload test
Caps: Capping force test, torque test
Labels: Fadeometer test, chamber test, resistance test

Additionally, we would need specifications tests to identify material used, dimensions, weight, brimful volume...

View More


Description:

Physical laboratory needed for EN electrical wiring testing to
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption EN 6059-305
Dynamic cut through EN 6059-405
Mould growth EN 6059-306
Smoke density EN 2825 B
Tensile ...

Requirements:

Mould growth EN 6059-306
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption EN 6059-305
Dynamic cut through EN 6059-405
Smoke density EN 2825 B
Tensile strength EN 6059-404

View More


Description:

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching test - Based on EN12457 - 2 Part 2 and EN - 12506
2. Sulfur test - Based on ISO 4689-3 : 2004
3. Determina...

Requirements:

IEC 62561

View More


Description:

Optical filter laboratory needed for transmissivity from UV testing through the visible spectrum of three filter glasses with the assumption two are band pass filters--the first centered around 430nm, the second around 365nm, and the third is short pass.

View More


Description:

FDA GLP Medical Technology laboratory needed for medical device testing for Characterization of mechanical properties.

Requirements:

Must comply with the FDA requirements for Good Laboratory Practice

View More


Description:

LONG TERM TESTING Geological laboratory needed for drillcore, rock, and soil testing for the presence of gold in samples of soil, rock, drillcore and RC using a fire assay measured by atomic absorption spectrometry.

View More


Description:

Geochemistry laboratory needed for olivine testing: LA-ICP-MS mass spectrometry analysis - melt inclusion of trace, and elemental testing of olivine crystals.

Requirements:

LA-ICP-MS with special heating and cooling stage

View More


Description:

Polymers laboratory needed for brittleness temperature testing according to ASTM D746 ISO 974.

Requirements:

ASTM D746 ISO 974.

View More


Description:

Aeronautical laboratory needed for Mil-Spec 25567E testing for liquid leak detection with oxygen and corrosiveness
Product already has 25567C approval

View More


Description:

LONG TERM. Oil and petroleum testing laboratory needed for ASTM testing of oil samples in the Middle East.

View More


Description:

Geological laboratory needed for testing abrasive qualities of a stone.

Requirements:

Abrasiveness.

View More


Description:

Geological laboratory needed for ASTM D4373-96 testing of calcium carbonate.

Requirements:

Would like to test it in all areas for food grade and pharmaceutical.
ASTM

View More


Description:

Polymers laboratory needed for testing thermoplastic products for strength, integrity, durability.

View More


Description:

Aerospace laboratory needed for ASTM testing of material for use in outer space to ASTM standards.

Requirements:

ASTM standards

View More


Description:

Large pharmaceutical company needs GMP laboratory with NPIRI grindometer to measure the fineness of grind on ink products and to perform a color assessment of dispersion products.

Requirements:

- NPIRI Grindometer-certified
- GMP

1. Fineness of grind on ink products
2. Color assessment of dispersion products

View More


Description:

Materials laboratory needed for flame retardant testing on polypropylene woven fabric per standards DIN 4102 Class B 2, EN 13501, UL94VNT-2, NFPA701, FMVSS302.

View More


Description:

ASTM metallurgical laboratory needed for testing gold plated coupons made with copper or aluminum bases for Thickness, Purity, Hardness, Appearance, Adhesion, Corrosion resistance(Porosity) and Reflectivity all according to ASTM standards.

Requirements:

Thickness, Purity, Hardness, Appearance, Adhesion, Corrosion resistance(Porosity) and Reflectivity based on ASTM standards.

View More


Description:

Pharmaceutical analytical chemistry laboratory needed for particle size analysis using a Malvern Zetasizer ZS90 with the red laser and a stray-light filter.

Requirements:

1) Malvern Zetasizer ZS90 with red laser and stray-light filter installed

View More


Description:

Materials Laboratory needed for ASTM Testing of Carbon Black as perASTM D3849 TEM determination of carbon black particle and aggregate size.

Requirements:

Testing required under 'Method A' as per ASTM D3849-2014.

View More


Description:

Physical chemistry laboratory needed for quantitative structure activity relationships (QSAR) analysis of cosmetics containing silicone.

Requirements:

QSAR / SAR

View More


Description:

Polymer laboratory needed for EPA and ASTM materials testing of a O/W micro-emulsion matrixColor; Physical State; Odor; Explosive Properties; Oxidising Properties & Incompatibility; Flammability; pH; Non-Newtonian Fluid Dynamic Viscosity; Relative Densit...

Requirements:

Color; Physical State; Odor; Explosive Properties; Oxidising Properties & Incompatibility; Flammability; pH; Non-Newtonian Fluid Dynamic Viscosity; Relative Density; Storage Stability at 54 C for 14 days and ASTM G31 Corrosion Characteristics.

View More


Description:

Civil Engineering firm needs materials laboratory for concrete and banana fiber physical testing and SEM analysis:

Requirements:

1. Compressive Testing
2. Tensile testing of Banana Fiber Specimen and Concrete Sample also.
3. SEM Analysis(Not So much needed)

View More


Description:

EPA environmental toicology laboratory needed for acute toxicology testing/ EPA PRIA Action Code #A532 for antimicrobial pesticide registration of a product, which is an Oil/Water emulsion.

View More


Description:

OECD GLP toxicology laboratory needed for Toxicology testing 5-BA physical-chemical properties on pesticides.

Requirements:

CIPAC, OECD, EEC

View More


Description:

Physical laboratory needed for ANSI vibration testing of luminaries to ANSI standard ANSI C136.31:2010.

View More


Description:

Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7
2. Liquid water permeability: Test method EN-1062-7
3. Acid Resistance . 4. SRI (solar reflective index) ASTM C 1549-04
5. Chloride Ion penetration ASTM C 1202 -97
...

View More


Description:

Environmental Simulation Laboratory needed for paint plastic cans testing for 28 days at stacked conditions to simulate summer test simulation
at day time 45 to 48 degree c, night time 29 to 35 degree c

? What tests are we going to perform...

View More


Description:

Materials Laboratory needed for Adhesion tape testing for confirming Adhesiveness of tapes

Requirements:

Need Test result and Test Report as per standard format

View More


Description:

Physical Environmental Laboratory needed with anechoic chamber for 3D antenna pattern measurements of a small unit (40 mm square) at 923.5MHz and 1575.4 MHz

Requirements:

Anechoic chamber

View More


Description:

Pharma Packaging laboratory needed for USP Testing of plastic containers as per USP 661 , Containers- Plastics, Physical Tests.

View More


Description:

Materials laboratory needed for IEST and ASTM Clean Room Gloves Testing:
1 Tensile Strength ASTM D412
2 Ultimate Elongation ASTM D412
3 Surface Resistivity @50%RH ESD/EOS S11.11
4 MVTR
5 Shedding and extractables - IEST RP-CC005.4
LPC ? 0.5 ?m, Cl...

Requirements:

The IEST RP-CC005.4 test is our primary goal. We can have the gloves tested for items 1-4 elsewhere if you do not have the ability to perform these procedures. If you can, we would prefer utilizing one test facility.

View More


Description:

Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm for at least stacking compression test + shock + vibration)

View More


Description:

Pharmaceutical company needs *Globule size limits and *Limit of free fatty acid tested per USP 39 injectable lipid emulsion standards Per: Method I and Method II as directed under Globule Size Distribution in Lipid Injectable Emulsions <729>.

View More


Description:

Orthopedics Medical Device Laboratory needed for ASTM Biophysical Testing: static compression, compression sheer, subsidence, dynamic compression, fatigue to runout, cantilever bend, dynamic cantilever bend

View More


Description:

Personalcare company needs medical device laboratory for Health Canada Class ii tampon compliance testing prior to importation into Canada.

View More


Description:

Environmental Laboratory needed for AASHTO Testing of portland cement/concrete per AASHTO M85. Standard Specification for Portland Cement (Chemical and Physical)

View More


Description:

Third-Party Laboratory needed for Vibration test in accordance with standard ANSI C136.31 Standards for Roadway and Area Lighting Equipment, Luminaire Vibration

View More


Description:

Europe company needs materials laboratory for specialized military-use tape testing for reflective, effective- fluorescence, yellow color,fire resistant qualities per EN 20471:2013 and EN ISO 14116:2015 standards

Requirements:

We want to test in reflectivity ( EN 20471:2013) and flame retardancy (EN ISO 14116:2015),also the property of keeping its first parameters after 50 wash cycles at 60 ° C.
Please tell me the price and the time you need for the tests.
We need these tes...

View More


Description:

Geology laboratory needed for coltan ore testing for content & chemical composition

Requirements:

content & chemical composition

View More


Description:

Medical device company needs Electromyogram (EMG) done for small muscle activity related to eye movements.

Requirements:

Sensitive EMG equipment for small muscle activity

View More


Description:

Food Safety testing laboratory needed to test for Isoeugenol in salmon product under FDA guidelines Due to Detention without Physical Examination Test

Requirements:

Isoeugenol seafood salmon product

View More


Description:

Oil laboratory needed for ASTM gasoline testing for specific heat and thermal conductivity to: Specific Heat Capacity by ASTM D2766 versus temperature of gasoline sample.
Thermal conductivity by ASTM D7896 versus temperature of gasoline sample.

Requirements:

Range of temperatures yet to be determined.

View More


Description:

Pharmaceutical Laboratory needed for particle analysis: PARTICLE SIZE determination by using the ?Alpine air jet sieve system?,

Requirements:

Alpine air jet sieve system

View More


Description:

Large engineering company needs laboratory to test Residual monomer rate % for Nylon PA6 material

View More


Description:

On site analysis needed in India of rock deposit for precious and semi precious metals and for gem stone.Black Rock with quartz bands seen in our field, so need to analyze the geo physical properties.

Requirements:

Field examination of rock deposit to know geo physical properties

View More


Description:

Materials Laboratory needed for 3000 hour accelerated aging testing of plastic connector made from polyamide 66+ 30% glass fiber, in order to see the status after 3000 hours of functioning for our plastic item ?Connector?.

View More


Description:

Geology laboratory needed for construction materials performance testing of rock used for dwelling sidings if it is good for Alberta weather

Requirements:

- test for accommodation for Alberta weather

View More


Description:

Furniture Consumer Products Laboratory needed for safety and weight capacity testing of chair attachment product.

Requirements:

Looking for safety issues and weight capacity.

View More


Description:

Automotive laboratory needed for VW Standard testing to measure colour and reflectivity in accordance to VW 50190, Components of the Vehicle Interior Trim

Requirements:

VW 50190, Components of the Vehicle Interior Trim

View More


Description:

Mechanical laboratory needed for vibration testing on marine engines.

Requirements:

heat

View More


Description:

FDA GLP Bioanalytical Laboratory needed for GLP Small Molecule Study for Molecular Level Study and Extinction coefficient for a small molecule in MeOH and water

Requirements:

Please keep all information confidential. The study is to be conducted according to GLP.

View More


Description:

ISO metallurgical laboratory needed for surface roughness testing on Aluminum. Quantity: 10 - 15 pcs, size 120 mm x 95 mm. Material: Aluminum.
Surface finish Rz and Ra.

Requirements:

ISO
Please remain my contact information and company confidential.

View More


Description:

Large company needs laboratory for Filtration device testing including bubble points and flow rate

Requirements:

Located in Massachusetts, USA

View More


Description:

Physical Laboratory needed for heat exchanger testing for sound pressure level of our unit evaporator like below picture Please your information further about cost and duration

View More


Description:

Preclinical Laboratory needed for biomechanical testing of Biologic implantables to be used as replacement tissue. Tests needed for mechanical properties such as elasticity, stress relaxation curve, (visoelasticity) yeald, tensile properties to failure po...

View More


Description:

Sports surfacing company needs Construction materials laboratory for ISO plastics testing UV testing as per ISO test method ISO 4892-2:2660

Requirements:

Test conditions: Test Cycle: ISO 4892-2:2660 cycle 1 Irradiance (0.51 ± 0.02) W/(m2nm) @ 340nm 102 min light at (65 ± 3) ?C BST, (50 ± 10)% RH 18 min light and water spray Filter: Daylight Exposure period: 1000 hrs

View More


Description:

Food analytical chemistry laboratory needed for Chemical validation testing of food processing chemicals. This involves us pulling diluted chemical samples from our dispensing system at the customer sites for validation.

View More


Description:

Biopharmaceutical company needs packaging laboratory for dessicant and humidity indicator card performance and seal strength testing



View More


Description:

ISO Accredited USA and European Biophysical Laboratory Needed for biomaterials testing of dental implant material: to ISO 14801- Dynamic fatigue test for endosseous dental implants

Requirements:

ISO 14801- Dynamic fatigue test for endosseous dental implants

View More


Description:

Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic resin cements

Requirements:

ISO 5833:2002 specifications, Implants for surgery -- Acrylic resin cements

View More


Description:

Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp

Requirements:

relevant testing and certification of compliance to above standard

View More


Description:

Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials

View More


Description:

Quarry needs Geology laboratory for marble and granite stone testing

Requirements:

As above

View More


Description:

Physical Laboratory needed exterior grade laminate testing for UV resistance

View More


Description:

Clinical Research Laboratory needed for anti-aging Cosmetics research testing of skin moisturizer, anti-aging cream, shampoos and face pack. Research Studies for publication.
? Skin irritation test
? Eye irritation test
? Stability studies
? Sensat...

View More


Description:

Laboratory needed for furniture testing of murphy-type bed: cycle testing of the wallbed up and down which, because of the integrated design, will also be cycle testing the sofa folding mechanism. We also need the standard array of cycle tests to the sofa...

View More


Description:

Laboratory needed for slip testing on our rubber acoustics product to DIN 51130, DIN 51097, BS 7976:2002, Surface Micro Roughness Testing

Requirements:

DIN 51130
DIN 51097
BS 7976:2002
Surface Micro Roughness Testing

View More


Description:

Physical Laboratory needed for FDA Testing of new portable water filtration device with ceramic filter ,ion exchange resin , carbon fiber , nano cluster media

View More


Description:

Laboratory needed for Slow bend test needed of train rails welded with electric flash butt welder 500lb or less. 136lb rail is the largest.. 125K psi with .75 deflection. 4 point.

View More


Description:

Geology Laboratory needed for ASTM testing: Analys of rock salt (sodium chloride) based on requirements of ASTM D632. Chemical analyses will include sodium chloride purity (%NaCl) and moisture, but sodium ferrocyanide may also be requested. Physical ana...

View More


Description:

Medical Device Laboratory needed for toothbrush bristle testing for stiffness of toothbrush bristle

Requirements:

testing to be done by instrument TRIBOMETER

View More


Description:

Medical Device Laboratory needed for quality control testing of sanitary pads for all quality parameters including physical measurements.

Requirements:

as said above

View More


Description:

Physical Laboratory needed to perform weathering testing on our plastic according with VW standard PV 3930. Exposure time should be 1500 h. We do not need evaluation after test. Second specimen should be tested according with Nissan standard (NES) M0135: ...

View More


Description:

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1. Temperature & latitude test as per DO 160 Section 4 Category -B3.

2. Temperature Variation test as p...

View More


Description:

Materials laboratory needed for crack testing in plastic parts

View More


Description:

ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich CoresASTM C297 - Standard Tes...

View More


Description:

Laboratory needed for quality control testing of the piping pressure of a piping steel lining

View More


Description:

Materials laboratory needed for ASTM Testing of composite construction materials to astm e 84, Standard Test Method for Surface Burning Characteristics of Building Materials

View More


Description:

Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded hot-plate apparatus. (We only have the...

Requirements:

-

View More


Description:

Medical device laboratory needed for physical testing of gauze used to manufacture sterile wound dressings.

Requirements:

ability to conduct tests such as density and tensile strenght

View More


Description:

Third party packaging laboratory needed for ASTM and ISO testing of pharmaceutical packaging material (chemical, physical and mechanical test) such as plastic bottle, closure, aluminium foil/ laminate, PVC/ PVdC film etc.

Requirements:

ASTM/ ISO

View More


Description:

Physical laboratory needed for custom wheel performance testing including safety, vibration and durability within its environment.

View More


Description:

Geotechnical laboratory needed for physical properties of different slurries, solids and liquid:
Color
Solid Concentration (TSS+TDS)
Heat of Formation
Specific Gravity
Specific Heat Capacity
Viscosity
Heat of Vaporization
Thermal Conductivity
Sur...

View More


Description:

Materials Laboratory needed for ASTM Testing of Processed woodcore Panel Board assemblies (using core material such as MDF / Particle Boards, Laminates, Edge Banding etc etc ).We are looking for Test Certification for ?ASTM E84-06a? for surface burning ch...

View More


Description:

Laboratory needed for cement testing both physical & chemical as per is 4031 & is 4032

Requirements:

cement testing both physical & chemical as per is 4031 & is 4032

View More


Description:

Oil laboratory needed for ASTM Flashpoint testing for Diesel fuel to comply with ASTM standards

Requirements:

to comply with the ASTM standards

View More


Description:

Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cables on tensile performance, abrasion resistance, crush, impact, bending, kink, temperature cycling, water p...

Requirements:


Testing fibreoptic cables on tensile performance, abrasion resistance, crush, impact, bending, kink, temperature cycling, water penetration, attenuation, PMD, chromatic dispersion, fire resistance, according to IEC Standard 60793-xx and 60794-xx. Follow...

View More


Description:

Laboratory needed for ASTM Testing of aggregates used in oil pipeline operations to the following standards ASTM:Cement:ASTM C150 ? Standard specification for Portland cement Aggregates:ASTM ?294, ?295 - Standard Guide for Petrographic Examination of Agg...

View More


Description:

Laboratory needed for study on the compatibility of slotted HDPE pipe (for horizontal wells) through a groundwater contaminant plume over time and with variable temperature while injecting steam. The product is multi-phased, consisting of jet fuel, trich...

View More


Description:

LONG-TERM TESTING Packaging Laboratory needed for packaging testing of In flexible packing materials like double laminated , triple laminated & other flexible packaging material for:
Flex crush resistance
Water vapor transmission rate
Oxygen transmis...

View More


Description:

Biomechnical laboratory needed for sports performance testing of Cardio machine - 800 lb. including weight limit, calories burned, tensile strength of metal or wear and tear including which muscles of the body and which areas of fat the machine burns i.e...

Requirements:

Confidential, must have confidentiality form.

View More


Description:

Packaging laboratory needed for packaging testing: Lamination bonding durability
Color fastness, and color shading consistent, Humidity testing, Rubbing and scratching test on box surface and PVC plastic window

Requirements:

Chemical
Color fastness, and color shading consistent
Humidity testing
Rubbing and scratching test on box surface and PVC plastic window
Lamination bonding durability

View More


Description:

Materials laboratory needed for surgical gowns testing
- NFPA Standards - Standards for the use of Inhalation Anesthetics.

- ASTM 1670, Standard Test Method for Resistance of Protective Clothing Materials to Synthetic Blood.

- ASTM 1671 Test Metho...

View More


Description:

Bioanalytical laboratory needed for flow cytometry for characterization of white blood cell separation filter. Need a laboratory that is capable of doing white blood cells counting. e.g: Flow cytometry counters such as ADVIA 2120 for Basophil method.

Requirements:

Located in Massachusetts

View More


Description:

Advanced technology company needs Laboratory for autoclave testing and Constrain testing on 27 samples

View More


Description:

Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal temperature and water immersion *Determination of tensile adhesion strength - C
*Determination of open t...

Requirements:

ANSI A118 or ISO 1300

*Determination of tensile adhesion strength - C
*Determination of open time
* Determination of slip

View More


Description:

Physical Laboratory needed for ASTM Flammability testing of water based primer formulation for confirmation that product it is rated 0 in NFPA 704 standard to ASTM D 6668 (according to NFPA 704 requirement)

Requirements:

the test must be ASTM D 6668 (according to NFPA 704 requirement)

View More


Description:

LABORATORY NEEDED FOR ANSI TESTING OF LED STREETLIGHT TO ANSI C136.31 VIBRATION TESTING.

View More


Description:

ELECTRICAL LABORATORY NEEDED FOR ANSI TESTING OF PHOTOCELL AND RECEPTACLE TO ANSI C136.10

LED STREETLIGHT ANSI C136.31 VIBRATION TESTING.

Requirements:

Both Tests must be made by accredited Laboratories for those standards, and they must be located in China.

View More


Description:

LONG-TERM TESTING Geophysical Laboratory needed for Particle Analysis: Particle Size Distribution by Laser Diffraction of Quartz, Fly Ash, GGBS etc. We require the Specific Surface area of the sample too, calculated by PSD analysis along with different D ...

Requirements:

We require the Specific Surface area of the sample too, calculated by PSD analysis along with different D values and 1, 2 and 3 Sigma values as applicable and distribution results.

View More


Description:

Materials laboratory needed for proficiency testing programme for Linear Thermal Shrinkage of Plastics as per ASTM D 1204.

View More


Description:

Materials laboratory needed for DIN and ASTM Testing of thermal insulations foam board. Testing to To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Wat...

Requirements:

To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Water vapour diffusion resistance factor: DIN 52615
Water vapour permeability : ASTM C355
Heat soaki...

View More


Description:

LONG-TERM TESTING USFDA Physical Chemistry Laboratory needed for particle size measurement using alpine air jet sieve shaker

Requirements:

site should be registered with USFDA

View More


Description:

Physical laboratory needed to Burst & Proof Pressure Testing to ASTM A234 WPB

Requirements:

ASTM A234 WPB

View More


Description:

Electrical Laboratory needed for battery testing for charges of following test as per IS 1651, Stationary cells and batteries, lead-acid type (with tubular positive plates)

Cell Details : 2V, 100Ah.

1. Test for capacity
2. Test for voltage during ...

View More


Description:

Physical Laboratory needed for drop and vibration testing for Expanded Polyethylene Foam EPE foam

View More


Description:

Biomechanical laboratory needed for bone porosity testing measurements of bone samples

Requirements:

Any method used for bone porosity testing

View More


Description:

Shipping company needs laboratory for hose bend testing of 6 hoses that need doing bending test according to EN1765 standard. Electrically discontinuous Hydrostatic tested, Vacuum tested. Oil Suction and Discharge Hose hose id:12 ID x 30' OAL working pres...

View More


Description:

Physical laboratory needed for impact testing of TSAA Door lng FR and RR.
Test: Side Impact Test (Shoulder area, arm rest area, hip area)
Standard: 8352Z-TG1-T001

Requirements:

Sample: TSAA Door Lng FR and RR
Test: Side Impact Test (Shoulder area, arm rest area, hip area)
Standard: 8352Z-TG1-T001

View More


Description:

Packaging laboratory needed for Plastics and Polymers testing of HDPE bottles for stack load stability testing and wall thickness

Requirements:

HDPE bottles for wall thickness and stack load stability testing

View More


Description:

Laboratory needed for particle size analysis (laser diffraction?) for a number of samples of cement (~30) . 30 samples.

View More


Description:

Materials laboratory needed for ASTM Testing of novel paint composition of anti repellent activity.

Requirements:

ASTM std tests

View More


Description:

Geology laboratory needed for purity testing of three different limestone rock samples. The results will be used to display the purity of the rock to potential buyers of the limestone material.

Requirements:

Test each of the three limestone samples.

View More


Description:

Therapeutics company needs laboratory for Syringe plunger force testing to ISO 7886-1 Annex G only
3 syringe models x 5 units/model x 3 reps/unit = 45 tests total

View More


Description:

LONG-TERM TESTING Large Medical Device Company needs materials laboratory for RAL-GZ 387/1 compression testing for fabric

View More


Description:

Physical laboratory needed for Flammability testing for SDS purposes. 2-3 products in the retail cleaning category

Requirements:

Flammability testing for SDS purposes

View More


Description:

Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the Hiding Power of Powder Coatings, ASTM D 3451, ASTM D 3451, Standard Guide for Testing Coating Powders and...

Requirements:

ASTM D6441, ASTM D 3451

View More


Description:

Materials laboratory needed for Permeation testing on elastomers to ISO 2782, Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods

Requirements:

Just need to meet the test method requirements.

View More


Description:

Large corporation needs physical laboratory needed for plastic cable testing: Load rating for pedestrian and vehicle (H-20, 40) for cable made of recycled plastic.

Requirements:

Load ratings for pedestrian and vehicle (H-20, 40)

View More


Description:

Large automotive supplier needs materials laboratory for physical testing on painted plastic such as the DuPont Impact test and Traverse Abrasion plus many more.

View More


Description:

USA or Canada analytical chemistry laboratory needed for chemical testing to Japanese Standards of Quasi-drug Ingredients JSQI methods for ID test, lead, arsenic, residue on ignition, readily oxidiazable substances and angle of repose.

Requirements:

JSQI methods

View More


Description:

Orthopedics company needs medical device product safety laboratory for accelerated ageing testing of Orthopaedic implants in tyvek pouches including extracables and leachable testing

View More


Description:

USA Materials Laboratory needed for ANSI Testing for light transmission (A light) to ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard

Requirements:

ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard

View More


Description:

ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 for the 120 Day Accelerated Water Treeing Test followed by test protocol to include Electrical Measurements...

View More


Description:

Ventilator company needs Laboratory for Fatigue testing of Centrifugal Fan Impellers of Mild Steel

View More


Description:

India materials laboratory needed for diaper testing:
1- measuring absorption under load(AUL)in diaper
2-the analysis method for monitoring distribution of super absorbent polymers in diaper

View More


Description:

Materials laboratory needed for ASTM proficiency testing for Linear Thermal Shrinkage of Plastics as per ASTM D 1204, Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

View More


Description:

LONG-TERM TESTING Metallurgical laboratory needed for stainless steel tubing certification and testing for certain RA value, surface roughness

Requirements:

Certification is required.

View More


Description:

Shoe manufacturer needs textiles fabrics testing:tensile, shrinkage,
and tearing tests

View More


Description:

Petrographical Analysis on 10 samples of Feldspar
Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Clay
Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Kaolin

Requirements:

Quantify major and minor éléments present in those samples in order to determine their degree of purity

View More


Description:

Accredited UK laboratory needed for construction building products testing of flexible sheets for waterproofing to BS EN 12691, Determination of resistance to impact
BS EN 12730. Determination of resistance to static loading and
EN 1847
for building...

Requirements:

BS EN 12691. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
BS EN 12730, Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. D...

View More


Description:

Packaging laboratory needed for melt flow index MFI testing for hdpe resin used in the manufacture of plastic crates. 20 samples

Requirements:

mfi - melt flow index

View More


Description:

LONG-TERM TESTING Oil Laboratory needed for long-standing motor analysis for metal and physical properties on motor oil performed every 30,000 miles.

Requirements:

We need to have a standing order for such testing.

View More


Description:

Electrical laboratory needed for Insulated Piercing Connector (IPC) testing to NFC33020 & NFC33004

Requirements:

NFC33020 & NFC33004

View More


Description:

Biomechanical Laboratory needed for Compression fatigue testing on dental implants under saline per ISO 14801, Dentistry -- Implants -- Dynamic fatigue test for endosseous dental implants

Requirements:

need to run 5 samples simultaneously which means that the testing facility should have at least 5 testing machines to conduct the testing on all five samples at the same time.

The testing facility is preferred to be in California but it is not mandat...

View More


Description:

Government Agency needs NABL certified materials laboratory needed for Tests on silica filler (commonly used in rubber products)

1) CTAB
2) DBP Structure
3) Pour Volume Distribution
4) Pour Size Distribution
5) Zeta Potential
6) Particle Size Dist...

Requirements:

lab must be NABL certified

View More


Description:

LONG-TERM TESTING Brewery needs packaging laboratory to outsource their HDPE resin analysis used in producing plastic plastic crates for bottles. Melt Flow Index (MFI) analyser for HDPE resin.

Requirements:

Melt Flow Index (MFI) analyser

View More


Description:

Metallurgical laboratory needed for Caustic soda testing on metals coatings.

View More


Description:

Certified lab needed in Hawaii for ASTM Testing: Slip resistance testing to ASTM 2047,Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

View More


Description:

Packaging Laboratory needed for vibration testing an automotive pallet load to ensure returnable packaging will hold up
pack ships for automotive manufacturing industry.
size of pallet load 48x45x53h
total weight 1050lbs
4 layers per pallet load
wil...

View More


Description:

Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break
2) Modulus of Elasticity (Young's Modulus)

Requirements:

(ASTM D 638), 3.0 +/- 0.5 mm thick, material cure for 30 minutes at 180 °C adhesive temperature, condition at 23 +/- 2 °C for 24 h, test at 23 +/- 2 °C, Type I specimen, W = 10 mm, G = 50 mm, 5 mm/min +/- 10 %)

View More


Description:

Biomechanical laboratory needed for Radioactivity Testing of dental propylaxis paste: Radio active dentine abrasion value ( RDA value ) for propylaxis paste. to DIN EN ISO 11609 Dentistry -- Dentifrices -- Requirements, test methods and marking

Requirements:

The testing method is by DIN EN ISO 11609 Dentistry -- Dentifrices -- Requirements, test methods and marking

View More


Description:

HVAC Air conditioning company needs physical laboratory needed for performance testing of HVAC: leakage and thermal leakage tests

View More


Description:

Accredited laboratory needed for electrical paperboard testing for compliance for type B3.1A of IEC 60641-3, Standard | Pressboard and presspaper for electrical purposes

View More


Description:

Packaging Laboratory needed for Burst Strength Testing of Corrugated Cardboards.

View More


Description:

Automotive Laboratory needed for physical testing to Volvo STD 423-0036, Impact strength,

View More


Description:

Clinical Sports Performance laboratory needed for clinical biomechanical testing in humans to validate performance of university's sports biomechanics equipment Simi motion analysis system, Vertigo static and dynamic balance system, Bertec force platform...

Requirements:

All tests done on humans

View More


Description:

Europe Materials Laboratory needed for Paint film performance tests on mild steel panels
Sr No Test
1 Salt Spray Test (504 hours)
2 Humidity Resistance (504 hours)
3 Pencil hardness
4 Dry Adhesion
5 Elongation
6 Impact Resistance (direct)
7 Impact...

View More


Description:

Materials laboratory needed for crazing resistance testing for a set of adhesives which are going to be pasted on a PC, PVC and SAN substrate.

View More


Description:

Materials Laboratory needed for ASTM Testing of textiles to ASTM D4157, Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

View More


Description:

INDIA PHYSICAL LABORATORY NEEDD FOR AUTOMOTIVE SAFETY GLOVE TESTING: CUT RESISTANCE TO LEVEL 4 GLOVE (PPE'S) ABRASION RESISTANCE
BLADE CUT RESISTANCE
HEAT RESISTANCE
TEAR RESISTANCE

IT IS USED IN AUTOMOBILE INDUSTRY FOR SAFETY PURPOSE

View More


Description:

Medical technology laboratory needed for ASTM Integrity Testing of balloon portion of enteral feeding devices as per ASTM F2528, Enteral Feeding Devices Retention Balloon Test Machine

Requirements:

The simulated gastric fluid should following the guidelines specified in ASTM F2528. The pH of the solution should be 1.2.

View More


Description:

Laboratory needed for testing of safety belts to ANSI 10.14, American National Standard for Construction and Demolition Operations - Requirements for Safety Belts, Harnesses, Lanyards and Lifelines for Construction and Demolition Use

Requirements:

ANSI 10.14, American National Standard for Construction and Demolition Operations - Requirements for Safety Belts, Harnesses, Lanyards and Lifelines for Construction and Demolition Use

View More


Description:

ISO 17025 Accredited Laboratory needed for Anti vibration glove testing according to ANSI/ASA S2.73 or ISO 10819, Mechanical vibration and shock - Hand-arm vibration or

Requirements:

ISO 17025

View More


Description:

Physical Laboratory needed for Surface Burning Characteristics of Building Materials as per ASTM E84 - 16, Standard Test Method for Surface Burning Characteristics of Building Materials

View More


Description:

Physical Laboratory needed stress testing done on chiropractic table equipment

View More


Description:

LONG-TERM TESTING Gemstone company needs geology laboratory needed for metallurgical and mineral analysis for gemstones, silica, gold, platinum, rare earth, etc. Initial testing for 6 samples. Please specify if there is reduced price for sending samples...

View More


Description:

Physical Laboratory needed for flammability pre-testing of carbon fibre samples to CS 25.853 Flammability Requirements for Aircraft Seat Cushions Appendix F, Part I, (a)(1)(ii) (i.e. 12sec vertical burn with 305mm x 70mm samples). The objective is to try...

Requirements:

Unofficial test, so no formal test report required. Also, maybe just one sample of each material may be submitted.

View More


Description:

Medical technology laboratory needed for catheter testing on intravenous catheter throughout the indicated therapy to check on thrombosis and flow rate.

View More


Description:

LONG-TERM TESTING Materials laboratory needed for rheology testing of bio sealant to find its gel time(i.e time required for the substance to change from liquid to gel).

Requirements:

we need a rheometer that checks within the range of 5 seconds.

View More


Description:

GLP Environmental toxicology laboratory needed for GLP toxicology studies: 5batch, physical-chemical (technical+formulation) toxicology studies

Requirements:

GLP, confidential

View More


Description:

Medical Technology / Biomedical laboratory needed for catheter testing: Embolic cube testing

View More


Description:

Geotechnical laboratory needed for AASHTO Testing to AASHTO T164 method D, Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) Need lab to conduct test method on asphalt cold mix.

Requirements:

AASHTO T164

View More


Description:

Materials Laboratory needed for biomechanical / biophysical testing for medical device burs:
¬Mechanical force of d¬evices test (compress¬ion, Torsion)
Biomechanical property of dental burs is important for safety usage so test should assure tor...

Requirements:

¬

View More


Description:

Materials laboratory needed for independent third party testing of laminate flooring for

1) Test for ortho phthalate plasticizers

2) Following tests with relevant ASTM test parameters (for vinyl flooring)
- Stain and chemical test
- Static load l...

Requirements:

Awaiting your feedback on the standards you are able to do in your labs and for the subsequent price quotation. We would like to initiate this process as soon as possible.

View More


Description:

GEOLOGY LABORATORY NEEDED FOR NON WOVEN GEOTEXTILE TESTING

View More


Description:

Exporter of rubber,plastic bathroom accessories needs physical laboratory for physical testing including prformance and biodegradability:
1 Tensile strength ISO 527 1
2 Elongation
3 Tear strength
4 Density / sp. gravity
...

View More


Description:

Polymer laboratory for PVC Testing. Test PVC powder its physical , chemical & identification test. 1) Identification of PVC 2) Viscosity, ml/g 3) No of impurity particle 4) Appearing Density, g/ml 5) Residual chlore thylene content ug/g I am providing d...

View More


Description:

Larg Construction Building Materials company needs certification laboratory for ANSI Testing of tile adhesives & grout accoding to ANSI standards.
FK10W Cementitious tile adhesive C1T EN 12004
GM1 Cementitious tile adhesive C2T EN 12004
FLS1000 Cemen...

View More


Description:

OECD GLP Environmental Toxicology Laboratory needed for Toxicology Testing Acute Oral Toxicity, AMES Test, Skin Corrosion, Skin Sensitization, In Vitro Mammalian Chromosomal Aberration Test (if AMES shows positive), In Vivo Mammalian Gene Mutation Test (i...

Requirements:

OECD GLP

View More


Description:

Materials Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials. Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in len...

View More


Description:

Materials Laboratory needed for Testing for plastics testing of LDPE / HDPE plastic bags:
1. Oxygen Transmission Rate (OTR)
2. Water Vapor Trasmission Rate (WVTR)

View More


Description:

ELECTRICAL CERTIFICATION LABORATORY NEEDED FOR POWER GENERATOR TESTING: EMISSION TEST, INPUT/OUTPUT TEST (WATTS - 50KVA), TORQUE/HP TESTCERTIFICATION AND ENVIRONMENTAL COMPLIANCE OF PRAE (PROCESS FOR REGENERATION AND AMPLIFICATION OF ENERGY) - GENERATOR T...

View More


Description:

Materials Laboratory needed for materials characterization testing of solid surface acrylic / polyester resin based composite material used in manufacture of kitchen and bathroom countertops. iIncluding general, thermal and mechanical properties and chem...

View More


Description:

Flooring Company needs materials laboratory for ANSI Testing to ANSI 137.1 Dynamic Coefficient of Friction

Requirements:

ANSI 137.1 Dynamic Coefficient of Friction

View More


Description:

Aerospace laboratory needed for Vicat softening testing for ABS according to spec sheet.

Requirements:

I will attach the spec sheet to an email once you respond.

View More


Description:

Bioanalytical Laboratory needed for Product development work for molecular biology (PCR, library prep, DNA sequencing on Illumina platform). We need help with verification testing using a molecular laboratory. Must follow protocols and generate data for ...

Requirements:

PCR, unidirectional workflow, DNA sequencing capability. Must follow protocols and generate data for reports to be submitted to FDA as part of design control.

View More


Description:

GLP Laboratory needed for biocidal testing of the physio-chemical properties of a liquid biocidal product.

Requirements:

GLP needed

View More


Description:

Contract Laboratory needed for film testing of UV400 Optical Film for UV protection and light transmission reflective, absorbtion and U Value

View More


Description:

Large corporation needs materials laboratory for physical testing: Peel adhesions in cold temperatures. 90° and 180° peels on various substrates. We would supply test substrates.

Requirements:

90° and 180° peels on various substrates. We would supply test substrates.

View More


Description:

Materials laboratory needed for plastics testing of corrugated polypropylene layerpad. abrasion test in accordance to DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD.

Requirements:

DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD

View More


Description:

Aerospace laboratory needed for SAE Testing SAE AMS 1435C Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways
Sector:Aerospace
Topic:Aircraft deicing, corrosion

View More


Description:

Oil Laboratory needed for Sulfur content testing of diesel fuel

View More


Description:

Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Mat...

View More


Description:

Biochemistry laboratory needed for custom synthesis and quality control testing of Zn2+ complex of anthracenyl terpyridine

View More


Description:

South America Geology Laboratory needed for rock identification testing

View More


Description:

West Africa geology laboratory needed for testing stone and sand samples from a geological survey.

View More


Description:

Certification Laboratory needed for Fire Retardency Testing of fabric to British Std 7837:1996 and British Std 5438:1989 ( 15 secs ). Please advise whether you can assist with FR and FRAS testing/certification.

View More


Description:

Electrical certification laboratory needed for LED Testing for Certificate for CGT FLAT (LED Light Flat tube)
Length: 1 meter
1) Lumen Test (4PI)
2) Certification
New Epermit + 1 COA
IEC60598-1 & IEC60598-2-1
3) Temperature Humidity
85C 85%RH @ 6 ...

Requirements:

1) Lumen Test (4PI)
2) Certification
New Epermit + 1 COA
IEC60598-1 & IEC60598-2-1
3) Temperature Humidity
85C 85%RH @ 6 hrs
4) Temperature Shock (LN2)
-50C to +125C(30min/5min/30min)
1 cyc= 1 hr
15 hrs=15 cycles
5)High Temp Operational Lifetime...

View More


Description:

Laboratory needed for validation testing projects on Locomotive Radiators and CACs.

1. Thermal Cycling:
Full size radiator testing, which is approximately 1000 Kg. Low and high temperature water will be required at 98 degree C and at 4 degree C. Air ...

Requirements:

We need to monitor the temperature , pressure, Stress , & expansion of the materials by using data logger

View More


Description:

Mechanical Laboratory needed for ASME Testing to ASME PCC-2, Repair of Pressure Equipment and Piping

Requirements:

Located in the US or Canada

View More


Description:

Biomaterials laboratory needed for in-vitro surgical sealant testing 1. Burst test of surgical sealant (2-PEGs) as per ASTM F2392.
2. Gel Time test - surgical sealant (2-PEGs)
3. Swell Test - surgical sealant (2-PEGs)
5. Gel Mixing test - surgical sea...

Requirements:

All In Vitro test conditions.

View More


Description:

Physical laboratory needed chair testing to test structural welding on a metal chair

Requirements:

Stress to chair on SWL

View More


Description:

Medical Technology Laboratory needed for biomechanical testing of dental implants to ISO14801 - compression to failure and fatigue testing of dental implant systems

Requirements:

ISO14801 - compression to failure and fatigue testing of dental implant systems

View More


Description:

Materials laboratory needed for PSTC Certification Testing of Pressure Sensitive Adhesive Tape Testing - Peel Adhesion, Tack, Static Shear

Requirements:

Experience testing Pressure Sensitive Adhesive Tape.
certified by The Pressure Sensitive Tape Council (PSTC).

View More


Description:

Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV . Requirements an...

Requirements:

Spain/Germany. EN 50464-4, Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV . Requirements and tests concerning pressurised corrugated tanks

View More


Description:

QUarry needs laboratory for grain size distribution testing of quarry samples

Requirements:

grain size distribution

View More


Description:

Physical laboratory needed for ASTM Flame testing to ASTM A136 fiberglass enclosure.

Requirements:

ASTM A136 fiberglass enclosure

View More


Description:

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Temperature 134 C
? Cycle for 5 mins
? 1000 times
Need to obtain a test report.

Requirements:

? Temperature 134 C
? Cycle for 5 mins
? 1000 times

View More


Description:

URGENT Materials Laboratory needed for batch release testing: Dynamic Surface Tension testing on a water-based inkjet ink.

Requirements:

Turnaround of <1 week; we have a batch that needs to be released, but our DST instrument malfunctioned and we are trying to still meet the deadline.

View More


Description:

Materials Laboratory needed for fire and explosion testing of a plastics powder

View More


Description:

Mining company needs laboratory for chemical testing, elements/Elemental Analysis Testing & machinery function

Requirements:


View More


Description:

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement , density, relative density, specific grav...

Requirements:

ASTM D792,
ASTM D638,
ASTM D790,
ASTM D256,
ASTM D648,
ASTM D785,
ASTM D3418,
ASTM D2584,

View More


Description:

LONG-TERM Geochemistry laboratory needed for Adsorption Isotherms testing on Shale samples

View More


Description:

Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone in accordance to ANSI 118.4 and ANSI 118.11.

View More


Description:

Materials laboratory needed for physical testing: Acron abrasion testing of rubber or acron wear testing

View More


Description:

Geology laboratory needed for Marble Analysis:
Caco3, Fe2O3, SiO2, Al2O3, MgO, MnO, Ph Value, Under 105 Degree Centigrade volatile Matter, HCL Insoluble Matter, Water Absorption, Brightness, Specific Gravity, Density.
Please provide estimation & Time Ta...

Requirements:

Caco3, Fe2O3, SiO2, Al2O3, MgO, MnO, Ph Value, Under 105 Degree Centigrade volatile Matter, HCL Insoluble Matter, Water Absorption, Brightness, Specific Gravity, Density.

View More


Description:

FDA GMP Physical Chemistry Laboratory needed for GMP Air Jet Sieve testing for Particle Size

Requirements:

FDA/GMP laboratory

View More


Description:

Materials Laboratory needed for peel testing of non-woven, laminated material

Requirements:

looking for laboratory in Southeast Asia, Singapore, Hong Kong, China region

View More


Description:

Environmental toxicology Laboratory needed for Pesticide Testing: 6-pack toxicology tests on minimum risk pesticide.

View More


Description:

Clinical Laboratory needed for cytokine testing in blood by Specific mediators for cytokines chemokines M1 M2 Macrophages and other chemical mediators in the blood after certain strenuous physical activities

Requirements:

Please call to discuss

View More


Description:

Pharmaceutical company needs laboratory for Leak Testing for drug 10cc Lyophilized Vials

View More


Description:

Physical Laboratory needed for Coupler Slip test as per IS 16172,REINFORCEMENT COUPLERS FOR MECHANICAL SPLICES OF BARS IN CONCRETE - SPECIFICATION

Requirements:

Tensile testing machine, extensometer

View More


Description:

URGENT: Aerospace company needs Laboratory for ISO Testing: scratch test per ISO 1518 (airbus requirement).

Requirements:

ISO 1518-1 Scratch Test. it requires a motorized equipment

View More


Description:

India metallurgical laboratory needed for metals testing for platinum, palladium, and gold

Requirements:

no

View More


Description:

Food firm needs Clinical laboratory for DOT physical
Breath Alcohol Testing, Non DOT Drug Testing - Collection Only - Our employee will bring Chain of Custody form
Workers' Compensation Injuries

View More


Description:

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids....

View More


Description:

Large corporation needs Physical Laboratory for Need bulk sample (~1,800-lb) jaw crushing of 12 x 6 dia. consolidated wet mix material (silica-alumina matrix) to 1/2 - 1 size.

Requirements:

Material has inherent moisture although appears like concrete on the exterior; should fracture easily through a jaw crusher; need contract lab to process material in the (Ohio) vicinity.

View More


Description:

Materials laboratory needed for motorbike gloves testing to EN 388 (Abrasion, Blade cut, tear and punchar) EN 420, ( PH, value, Crom VI, and etc). Please send the quotation, time and material required for these)

Requirements:

EN 388 (Abrasion, Blade cut, tear and punchar) and EN 420 ( PH, value, Crom VI, and etc). for motorcycle garments ( gloves).

View More


Description:

CFB Plant needs geology laboratory for geophysical testing: Limestone reactivity test
Please specify whether you have a test that can generate a limestone sulfation reactivity vs particle size graph

View More


Description:

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongatio...

Requirements:

Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongation 300 ASTM D 1000
Tear resistance >50 ASTM D1004
Adhesion to steel >2 AST...

View More


Description:

Consumer Products Laboratory needed for baby wipe testing including all Analytical,Microbiological and Physical testing on baby wipes

Requirements:

with the range of tolerance for each parameters

View More


Description:

Geology laboratory needed for Calcium Carbonate testing from a mine

View More


Description:

Shipping vessel owner needs Spain laboratory for bunkered fuel analysis
?Asphaltenes, Ash, Carbon Residue
?Density, Flashpoint
?Sulfur Content, Hydrogen Sulfide
?Microbes Contamination
?Pour Point, Stability
?Total Sediment Potential (TSP)
?V...

View More


Description:

LONG-TERM TESTING: USA food laboratory needed for saffron testing to ISO 3632, Spices -- Saffron (Crocus sativus L.)

Requirements:

Contact and Company info to be confidential.

View More


Description:

Contract Laboratory needed for pesticide testing of Accelerated Storage Stability and Corrosion Characteristics 14 day study for our Gluteraldehyde (pesticide).

Requirements:

Accelerated Storage Stability (830.6317) and Corrosion Characteristics (830.6320)

View More


Description:

GEOCHEMISTRY LABORATORY NEEDED FOR CHEMICAL COMPOSITION TESTING OF 2 STONES AND COAL SLAG.NEED TO CHECK chemical % of below compounds, Al2O3, Sio2, MgO, Fe2O3, K2O, CaO and soluble chloride.

View More


Description:

University researcher needs environmental laboratory for soil analysis and water microbial analysis
1) soil physical particle size distribution test
chemical, total carbon, minerals testing
microbiological total fungal, bacterial and eartthworm analy...

View More


Description:

Cosmetics Laboratory needed for Accelerated Stability Testing to determine shelf life of cosmetic product

View More


Description:

Physical Laboratory needed for Scratch hardness testing to be performed on paninted panel per ISO 1518 for Airbus

View More


Description:

Food laboratory needed for Smoke point testing of edible oil blend

View More


Description:

LONG-TERM TESTING Southeast Asia Laboratory needed for grade testing of Graphite

Requirements:

A test can would be able to determine the grade of Graphite

View More


Description:

URGENT Physical laboratory needed for uv test ing( sun trace test) and corrosion testing 1000hrs as per Astm Stananderds.and What requirment of spicemen sizes. Please provide a quote and terms for the testing.


As the matter is urgent we that ap...

View More


Description:

ISO 17025 Automotive laboratory needed for all Automotive charger testing such as EMC conformance, vibration, dimensional,

Requirements:

Accomplish with the ISO 17025

View More


Description:

Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone.

View More


Description:

Materials laboratory needed for ASTM and Lubrizol Testing for Test cloud point of water soluble ethoxylated product. Cloud point of a liquid detergent formulation to ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

Requirements:

ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

View More


Description:

FDA Laboratory needed for Color identification analysis for FDA Detention without Physical Examination (DWPE), DWPE. Samples located in China

View More


Description:

Automotive mechanical laboratory needed for front suspension springs testing for test requirements for Corrosion Key Life Fatigue test (KLT), t.e. Heat Soak, Coating Flexibility, Gravelometer, Coating Flexibility, Wear Resistance, Cyclic Corrosion, Fatigu...

View More


Description:

Accredited laboratory needed for power steering hose testing to SAE J2050 and SAE J2076. Full validation of 1 style each of high and low pressure power steering hose.

Requirements:

Laboratory must be able to do the full compliment of tests as described in SAE J2050 High-Temperature Power Steering Pressure Hoseand SAE J2076.High-Temperature Power Steering Return Hose - Low Pressure

View More


Description:

Accredited laboratory needed for SAE J1401 / FMVSS106 brake hose testing.. Interested in doing a full validation on 5 different brands/types of brake hose and just whip testing on 2 to 5 additional brands/types.

Requirements:

Laboratory must be able to do the full compliment of tests as described in SAE J1401 Road Vehicle - Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids / FMVSS106,,Federal Motor Vehicle Safety Standards; Brake Hoses .

View More


Description:

GEOLOGY LABORATORY NEEDED FOR COLTAN ORE TESTING FOR CONTENT & CHEMICAL COMPOSITION

Requirements:

SAMPLES REQUIRED IN KILOGRAMS
COST OF THE ANALYSIS

View More


Description:

Geology laboratory needed for geophysical testing: Size, abrasive index, moisture content, bulk density, gradation

These tests need to be done on limestone and gypsum rock samples.

View More


Description:

Physical chemistry laboratory needed for Colloidal silver analysis for Ppm and or particle size / foreign particulate

Requirements:

Ppm and or particle size / foreign particulate

View More


Description:

Medical Device Laboratory needed for Medical Device Testing to ASTM 640-12, Standard Test Methods for Determining Radiopacity for Medical Use

Requirements:

Labs based in Australia / Taiwan / China preferred.

View More


Description:

Geophysical laboratory needed to make geophysical measurements on 1-5 soil cores, each comprised of multiple test samples. The desired measurements include Compressional (P) and shear (S) wave seismic velocity, Electrical conductivity/resistivity, Dielect...

Requirements:

The desired measurements include Compressional (P) and shear (S) wave seismic velocity, Electrical conductivity/resistivity, Dielectric permittivity, Hydraulic conductivity/permeability, Matric bulk density, Soil water retention parameters (van Genuchten ...

View More


Description:

Materials laboratory needed for physical testing of machine part that has Sulphuric Anodization on Aluminium that require following testing.


a. Insulation of the oxide coating (Disruptive voltage test)
b. Sealing quality ? to measure lo...

Requirements:

Dear SIr

We would like to enquiry if your lab able to provide below service:

part with Sulphuric Anodization on Aluminium that require following testing.


a. Insulation of the oxide coating (Disruptive voltage test)
b. Sealing qual...

View More


Description:

Flooring manufacturer needs NATA accredited laboratory for impact isolation of vinyl flooring.

Requirements:

Need NATA accredited lab

View More


Description:

Pharmaceutical laboratory needed for propofol injectable testing of 5 batches of propofol injectable emulsion for average globe size, number of globules, largest globule and particule matter.

Requirements:

Specification:

a)average globule size: <240 nm (at release).
b)Number of globules >5 µm ? 15 µm: not more than 20 globules (at release).
c) Largest globule: ? 20 µm
d) particular matter: ? 10 µm not more than 3000 particules/container
? 25 µm not...

View More


Description:

LONG-TERM TESTING Company needs Clinical laboratory for whole blood testing. during physicals: CBC, HIV, HEP and other typical screens. Volume is approximately 30 per month.

Requirements:

Normal tests from brief physical

View More


Description:

Pharmaceutical Physical chemistry laboratory needed for particle size analysis on sample using alpine jet sieve.

Requirements:

Alpine Jet Sieve.

View More


Description:

Physical Laboratory needed for tensile strength testing. High capacity Instron (50kN+) with environmental chamber for elevated temperature (300-400C) tensile strength testing

Requirements:

High capacity Instron
Environmental chamber
Metal bar tensile strength testing at elevated temperatures

View More


Description:

Medical Device Company needs laboratories for Compression testing on gloves made from Spandex and Nylon (mm mercury pressure)
range.

Requirements:

Need the minimum and maximum pressure measurement.

View More


Description:

1.Textile composition testing
2. Hazardous element testing
3. Durability Testing
4. Moisture absorbency

View More


Description:

Consumer Products Laboratory needed for Footwear physical test, colorfastness, full grain leather test, California prop 65

Requirements:

California prop 65

View More


Description:

Mechanical Laboratory needed for motor testing of 24 motor assemblies measured for surface roughness (required spec. is Ra 0.4µm max). The surface we would like to measure is on a 8mm shaft within an axial location of .188, we would like both axial and c...

Requirements:

Please let me know what the pricing and lead time would be to measure these parts. We have 5 units that we can send you today for measurement, the remaining 19 units can be sent 2-3 weeks from today.

View More


Description:

Accessory company needs consumer products testing for UV protection of fabrics used for headbands and 3 different fabrics.

View More


Description:

Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature as per IEC-60331. The dimension of tape is 1) 8.00 mm/ 0.11 mm, We need below tests to be performed:- 1)...

View More


Description:

Contract Laboratory needed for complete switch testing of the complete test file PV 3520 : 2016-02

View More


Description:

ISO/IEC 17025 Automotive Laboratory needed for General Motors Testing: Test for automotive GM14573, Global Performance Requirements for Labels.

Requirements:

Laboratory Certified on ISO/IEC 17025

View More


Description:

Performance Laboratory needed for Ballistic Visor optic evaluation
Fogging assessment test
Optic distortion test
Luminous transmittance test
Haze resistance test
Refractive power test
Prismatic deviation test

Requirements:

Fogging assessment test
Optic distortion test
Luminous transmittance test
Haze resistance test
Refractive power test
Prismatic deviation test

View More


Description:

Europe filter company needs test laboratory to perform turbidity reduction and contaminat retained mass on our sand filter. Our sand finter in very small, from 15 litres to 200 litres, and is used in above ground swimming pool to European norm EN 16713-1

Requirements:

The test must be refered to the European norm EN 16713-1

View More


Description:

Physical laboratory needed to provide a quote for high pressure testing - upto 30 KSI + High Temperature - to 400F testing More details after confirmation of interest in performing testing..

View More


Description:

India biophysical laboratory needed for surgical adhesive testing

View More


Description:

Petroleum company needs NABL Accredited Laboratory for grease testing as per Indian Standards IS 507 : 1993 Grade 2 (https://law.resource.org/pub/in/bis/S11/is.507.1993.pdf) : 1. Glycerine content, percent by mass, MAX 2. Low temperature pumping properti...

View More


Description:

Safety Laboratory needed for eye protection testing to ISO 4855-1981(E) Clauses 13 and 14 for eye protection.

View More


Description:

Manaufacturer needs laboratory for hybrid composite testing with added carbon fibre and fly ash,though we require chemical composition of that hybrid composite.

Requirements:

Our specimen is made of aluminum so the laboratory should capable of getting its chemical composition

View More


Description:

Raw Material manufacturer needs laboratory for Vapor Pressure testing,
Surface Tension testing,
Partition Coefficient (Shake Flask), testing, and
Partition Coefficient (HPLC) testing

View More


Description:

Physical Laboratory needed for ANSI/ IEEE Arc Resistant testing of MV Metal Clad Panel to ANSI/IEEE C37.20.7 40kA 0,3/0,5s ? 13,8kV ? 60Hz Please specify the information for commercial conditions for the test

Requirements:

ANSI/IEEE C37.20.7

View More


Description:

Non-Destructive NDT Laboratory needed to provide a quote for the failure analysis of a failed CW pump bolts.

We require doing the following testing:

? Digital photography
? Visual examination
? Physical measurements
? Corrosion examination (Co...

View More


Description:

Consumer Products Safety Laboratory needed for General Product Safety Directive , GPSD EN 71-1, Mechanical and physical properties of Juvenile Products including:
PAHs test (PVC)
Formaldehyde test (textile)
PCP test (textile)
AZO Dyes test (textile)

Requirements:

Please specify:
How much would it cost for above testing?
Where would the testing take place?

View More


Description:

Physical laboratory needed for Glass strength testing for food container. Glass shock testing for breakage.

Requirements:

Glass shock testing for breakage

View More


Description:

Materials Laboratory needed fo Testing shear strength flatwise testing Fabric base of phenolic sheet sample as per India Standards IS 2036, Phenolic Laminated Sheets

Requirements:

India Standards IS 2036, Phenolic Laminated Sheets

View More


Description:

Mechanical Laboratory needed for industrial spring testing: KLT tests (Key Life Tests) for transportation springs according to company specified operations for performance as per our document. We look forward to hear your feedback.

View More


Description:

Aerospace laboratories needed for Fastener tension and shear testing per National Aerospace Standard (Metric) NASM 1312-8 and NASM 1312-13

Requirements:

BC or WA location preferred. Testing according to NASM 1312-8, Aeronautical Fasteners Test Methods - Tensile Strength Equipment and NASM 1312-13, Fastener Test Methods for Double Shear Tests

View More


Description:

India Materials Laboratory needed to provide a quote of rates for testing shear strength Flatwise of Fabric base Phenolic sheet as per Bureau of Indian Standard, BIS 2036 Phenol Sheets

Requirements:

Bureau of Indian Standard, BIS 2036 Phenol Sheets

View More


Description:

University Researcher needs India Physical Laboratory needed for Fracture toughness testing (K1c) for aluminium composite.

Requirements:

Fracture toughness testing machine with clevis for C T specimen

View More


Description:

Laboratory needed for petroleum testing of three petroleum based samples that require the following analyses:
Appearance (physical state, color, etc.); Upper/lower flammability or explosive limits; Odor; Vapor pressure;Odor threshold; Vapor density; pH; ...

Requirements:

Please let me know if you will be able to perform the tests at your earliest convenience. Thanks.

View More


Description:

USA physical chemistry needed for particle analysis and distribution testing of carbon black samples that range in size from o.2 micron up to 400 micron. particle distribution report will need to show mean, median, distribution curve and other industry st...

Requirements:

Test would need to be done in liquid solution as similar to the output from a Coulter LS 13 320

View More


Description:

Physical Laboratory needed for aluminum cable testing: Aluminum cable type ACAR 750 MCM 19 (6201) + 18 (1350). stress-strain for 5°, 25°,60°, y 80°C and a creep test for 1 hour, 24 hours, 48 hours, 72 hours y 10 years.

View More


Description:

USA Volkswaren approved automotive labs needed to test Al wheels for Cornering fatigue testing

Requirements:

Should be Volkswagen approved

View More


Description:

Large corporation needs textile laboratory to run some washing test on different uniforms from different suppliers including:
Shrinkage
Decoloring
Performance
Durability
Stretching
Between others

Requirements:

Shrinkage
Decoloring
Performance
Durability
Stretching
Between others

View More


Description:

New Zealand laboratory needed for head space testing on water base paint

Requirements:

need to pass new zealand work space for spraying

View More


Description:

India Physical laboratory needed for joint testing to test double universal joint for following test conditions
1) Functional Test
2) Double Torque test
3) Fatigue Test.
Test parameter will shared later once you confirm the testing capability for abo...

View More


Description:

Physical Laboratory needed to test the life of seal which is used for sealing pneumatic solenoid valve .

View More


Description:

Biophysical Laboratory needed for ISO Testing of medical implant. The material is Metal. It is to ensure that the design does not fail under standardized conditions for example ISO 9585:1990, Implants for surgery -- Determination of bending strength and ...

Requirements:

ISO 9585:1990, Implants for surgery -- Determination of bending strength and stiffness of bone platesand similar standardized conditions

View More


Description:

Physical Laboratory needed for salt spray testing on powder coating surface of( MS sheet )

View More


Description:

Waste Management company needs USA physical laboratory for rubber pellet testing to determine how pellets react to burning at low temperature, electric induction furnace or crucible with the vacuum along with capturing and condensation of vapors

View More


Description:

Energy company needs laboratory for fuel testing. I have three samples (Light Ends, Solvent, and Industrial Diesel Fuel) that would require the tests the following tests:
? Appearance (physical state, color, etc.);
? Upper/lower flammability or explosiv...

View More


Description:

University Researcher needs India Physical Laboratory for drop weight impact testing.

aluminium fiat 2mm thickness

Requirements:

this is required for my projects works

View More


Description:

Physical Laboratory needed for acoustics testing of Light Weight Hollow Core Precast Cement Wall Panels for sound absorption and transmission

View More


Description:

University Researcher needs Africa geology laboratory for Mineral deposite identification by geophysical means.

Requirements:

mineral type, mineral variation, density and concentration.

View More


Description:

Physical Laboratory needed for compression testing of fiberglass and silica based cloth that range in thickness from 1/8 to 0.165

Requirements:

wanting to see how much the cloth will comrpress with pressures in the area of 30,000 lbs

View More


Description:

India Physical Laboratory needed for Tensile Test ME ROD 18.5 MM

Requirements:

41-56

View More


Description:

Engineering firm needs physical labortatory for elastomer physical testing eg uniaxial tension and compression, and equibiaxial tension and compression tests

Requirements:

uniaxial, equibiaxial

View More


Description:

Design and Engineering company needed laboratory for sandwich panel testing:

1) Test Sample :- Aluminum Honeycomb Sandwicu Panel
2) Material :- 1) Aluminum Sheet 2) Honeycomb Core (Alu) 3) Adhesive Glue
3) Test Parameter :- 1) AGING (Specifi...

View More


Description:

India engineering company needs textile laboratory for shrinkage test of fabric base laminated sheet,grade F-2,

View More


Description:

USA Automotive laboratory needed for SAE and ASTM Testing: Compression Stress Relaxation Test SAE J2979 + Low Temp Brittleness ASTM D2137

Requirements:

COMPRESSION STRESS RELAXATION
The test must be applied for 3000 h at 150 °C +/- 2 °C (Residual Sealing Force) 25% compression

Record RSF readings initially at 1 hour + 5 minutes, 24 hours, then at weeks 1, 3, 6, 9, 12 and 18.

Perform fluid changes ...

View More


Description:

Hong Kong laboratory needed for test equipment testing

View More


Description:

Mumbai laboratory needed for American Public Health Association APHA color test ,

View More


Description:

Physical Laboratory needed for NFPA fire rating testing of metallic cable trays ( hot dip galvanized) in conformity to NFPA 130. Fixed Guideway Transit & Passenger Rail Systems

Requirements:

1 hour - 500 C

View More


Description:

INDIA LABORATORY NEEDED FOR DIESEL FUEL TANK TES WELDING SPATTERS TESTING TO DETERMINE IF COUNIT MILIPORE VALUE OR NOT .

Requirements:

NO

View More


Description:

Physical Laboratory needed for SAE testing: solar radiation test as per SAE J575-2010, Test for Motor Vehicle Lighting Devices and Components

View More


Description:

Physical Laboratory needed for thermal and optical properties testing (absorptance/emittance) for a small electronics board (50 mm x 50 mm). The purpose of this test is to fully define the behaviour of the board as it is to be used in space operations.

Requirements:

The testing will be required to identify the thermal properties of a coated electronics board. Further to this the optical properties of the board also require defining.

View More


Description:

Physical Laboratory needed for a number of tests for flammability of HAND SANITIZER LIQUID with 50% ethanol,
what do we need as tests other then flash point - auto-ignition temperature to check its flammability

Requirements:

NA

View More


Description:

China physical laboratory needed for abrasive paper testing. Please provide cost of testing

View More


Description:

Preclinical Laboratory needed for in-vivo gastroenterology study to get a first estimation of the likelihood that a gastroenterology physical barrier might become twisted or entangled in some fashion that it could cause harm to the animal and my inference...

View More


Description:

South Africa Laboratory needed for Herbicide Testing :

? Physical Property Test
? Storage Stability Test

Reports and summary on the Physical properties and Storage stability of the formulated product. Applicants should consult both (a) the most re...

Requirements:

Reports and summary on the Physical properties and Storage stability of the formulated product. Applicants should consult both (a) the most recent edition of the ?Manual on Development and use of FAO and WHO Specifications for Pesticides? (3), obtainable...

View More


Description:

Asia or Europe laboratory needed for tobacco physical and chemical testing

View More


Description:

Physical Laboratory needed for certification testing of guardrail and handrails. Require load push testing 300 Lbs to 400 Lbs at the new SS guardrail and handrail installed

Requirements:

Certificate after testing

View More


Description:

Russia Physical Laboratory needed for Pressure/Vacuum Leak Testing

View More


Description:

Europe laboratory needed for cigarettes and tobacco testing:physical and chemical tests. (a) Smoke analysis of ciagrettes
(b) Tobacco filler analysis
(c) Cigarette physical tests

Requirements:

(a) Smoke analysis of ciagrettes
(b) Tobacco filler analysis
(c) Cigarette physical tests

View More


Description:

California clinical research laboratory needed forconsumer testing of workout training apparel under physician's monitoring. Product testerneeds to test a workout apparel prototype for at least 7 days. We want to do on sight physicals and monitor the test...

Requirements:

I am looking for a full workout fascility where a

View More


Description:

Large transportation company needs physical laboratory for Thermal cycle testing for water charge air coolers with below test requirements. Requirements are the following:
There are 3 stages of thermal cycle testing (TC). Stage 1, stage 2 and stage 3. ...

Requirements:



View More


Description:

Physical Laboratory needed which has an accreditation for the scope of the test methods in accordance with IEC 60754-1 - Test on gases evolved during combustion of materials from cables for raw material of Silicon electric wire. I would appreciate if you ...

View More


Description:

Pharmaceutical manufacturer needs physical chemistry laboratory to perform Partical Size Distribution test of Sugar Spheres using Sieve Shaker (Ro-Tap).

Requirements:

Ro-Tap

View More


Description:

Physical laboratory needed for cut resistant testing to ANSI/ISEA 105 to test industrial glove cut resistant level. Please specify how much it costs and what's the lead time from sample receiving.

View More


Description:

India physical laboratory needed for cement strength test to meet either 425 kilograms per square centimeter, or 525 kilograms per square centimeter,

Requirements:

to test whether meet 425 or 525

View More


Description:

Biomedical laboratory needed for physical examination. for medical sutures

View More


Description:

Physical Laboratory needed to perform Salt Spray (fog) test for PTFE coated bolts (Fastener) as per ASTM B117

View More


Description:

Physical Laboratory needed for salt spray test done to Requirement standard - ASMT B117 and should be Boeing approved.

View More


Description:

India Physical Laboratory needed for determining thermal co-efficient of expansion tested for 72 glass fibre reinforced plastic (fibreglass) rods of various diameters.

Requirements:

There are various methods but whatever is the most accurate and low cost.

View More


Description:

Physical Certification laboratory needed for certification testing of Lighting fixture to sustain full load operation in temperature reaching 70 deg. C. in direct sunlight with high content of ultra violet rays to 2 luminaire as Z3430/34R & Z3415/17RB

View More


Description:

India physical laboratory needed to test Hardboard strength, water absorption etc. Kindly advice oncharges, time etc. with courier services

View More


Description:

India physical laboratory needed for solar reflectance index (SRI) Testing

View More


Description:

India Physical laboratory needed for corrosion testing to optimise corrosion paramets. Corrosion gravimetric method tests for mild steel and other coupons in aggressive environments by varying parameters

Requirements:

to optimise the corrosion parameters

View More


Description:

Europe or Middle East Laboratory needed for absorption testing of briquette made of biomass substances .
We would like you to analyze the product and test it and find out the water absorption percentage and the ability of the product to store and keep wa...

View More


Description:

Plastics (Plasticised PVC) flooring manufacturer needs physical laboratory for combustion analysis of condensate from manufacturing operation that produces condensate. I am interested to have this liquid evaluated for future combustion purposes i.e. a po...

Requirements:

I am in experienced in the tests required but I believe the description I have written above should identify, what is required.

View More


Description:

Physical Chemistry Laboratory needed to quantitatively analyse the particle size and the level of amorphism. The analysis output of this two tests would be a statistical distribution of particle sizes, and a percentage of amorphous vs. crystalline phases....

View More


Description:

South Africa Physical Chemistry Laboratory needed for Particle Size Distribution (PSD) testing of screened material for Performance Testing a vibrating screen.
The material is Iron Ore sinter from the Arcelor Mittal VDB works. Maximum Material size:- -30...

Requirements:

Standard PSD test on screened iron ore sinter with reports

View More


Description:

Physical Laboratory needed for Garment Flammability testing

Requirements:

Just Flammability test for garments

View More


Description:

Manufacturer a counter top material with recycled window glass and an epoxy resin binder needs physical laboratory for NSF / ANSI / ASTM Physical Properties Testing
Food Safety:NSF/ANSI 51
compressive strength, tested to ASTM C39
Absorption, tested to ...

Requirements:

Food Safety:NSF/ANSI 51
compressive strength, tested to ASTM C39
Absorption, tested to ASTM c-97-02
Sctratch Resistance/Mohs Hardness
Modulus of Rupture, tested to ASTM c-99
Radon Emissions, compared to EPA-402-r-92-004
PH
Miscibility(in water)
De...

View More


Description:

Physical laboratory needed for materials testing :
1 Min reflective index wavelength range 250 to 400 nm 60%
2 NIR reflectance ISC 220 ISO 7724 Wavelength - 680 nm ?10%
3 NIR reflectance ISC 278 ISO 7724 Wavelength - 680 nm ?14%
4 NIR reflectance ISC ...

View More


Description:

India physical laboratory needed for dynamic light scatting (DLS) testing with DLS x-ray diffractometer

View More


Description:

Chicago area senrory laboratory needed for odor testing of textiles following physical activity.Odor panel must be able to provide a score/rating with descriptors on samples.

Requirements:

Odor panel must be able to provide a score/rating with descriptors on samples.

View More


Description:

PHYSICAL LABORATORY NEEDED FOR SAE TESTING: STRENGTH TEST OF AIRPLANE CARGO NET, UNDER SAE AS 5385C, Cargo Restraint Straps - Design Criteria and Testing Methods

Requirements:

STRENGTH TEST OF A CARGO NET. COMPLY WITH SAE AS 5385C

View More


Description:

Texas Laboratory needed for ISO Comparative testing for contact lens solutions to ISO 11981 2nd ed 2009 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of physical compatibility of contact lens care products with contac...

Requirements:

ISO 11981 2nd ed 2009 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of physical compatibility of contact lens care products with contact lenses

ISO 11986 2nd Ed 2010 Ophthalmic optics -- Contact lenses and contact ...

View More


Description:

India physical laboratory needed for Chloride stress corrosion cracking test for Aluminium 7075 material, in Nacl solution

View More


Description:

Materials Laboratory needed for Physical Testing of Chromadek faced, EPS filled, sandwich panels.
Load testing
Strength testing
Air/water permeability
Fire resistance
Acoustic behavior and more to SANS 54509:2014 / EN 14509: 2013

Requirements:

SANS 54509:2014 / EN 14509: 2013

View More


Description:

Physical Laboratory needed for medical device vibration testing and physical impact testing of Titanium Osmotic Pump in Medical Devices

View More


Description:

PHYSICAL LABORATORY NEEDED FOR LEAK TESTING PER STP0032-01 USING LEAD TEST SOLUTION STM0334-01 6 LIDS THAT GO TO A FUEL TANK THAT WE NEED PRESSURE AND SEAL TESTED. WANTED TO SEE IF YOUR COMPANY COULD DO THIS TYPE OF WORK FOR US; WE DO NOT HAVE THIS INHOUS...

Requirements:

LEAD TESTING AFTER PRESSURE TEST

View More


Description:

Physical Laboratory needed for weatherability testing of 2 D barcode labels for life cycle/ Weather-ability test.

View More


Description:

Nail polish company needs consumer products safety laboratory familiar with Europe Testing Requeirements for nail polish testing (micro stability, chemistry1) Formulation 2) Material Safety Data Sheet for all added ingredients (pigments, glitter etc inclu...

View More


Description:

Physical Laboratory needed for medical elastic bandage testing for the force it generates at 50% extension and various elongations. The customer states it must be 1.35 foot pounds at 50% extension.

Requirements:

just force at various elongations

View More


Description:

GLP Compliance Laboratory needed for pesticide testing: Physical chemical properties test of pesticide product following CIPAC test method (example: water content, wettability, suspensibility, dustiness, flowability, attrition resistance, etc)

Requirements:

GLP compliant following CIPAC test method (example: water content, wettability, suspensibility, dustiness, flowability, attrition resistance, etc)

View More


Description:

UK Physical Laboratory needed for Fatique Testing to BMW Standard BMW PR 060 Dynamic Fatigue test

Requirements:

BMW PR 060 Dynamic Fatigue test

View More


Description:

Physical laboratory needed for materials testing of lamination product for: Tensile & Elongation
Tear Strength
Surface Receptivity & Adhesion (WET & DRY)
Ageing
Low Temp. Flex
Flex Cracking
Porosity
Oil Resistance
Variation in Weight
Weft Distort...

View More


Description:

Large engineering company needs India Physical Laboratory for Vibration testing.

View More


Description:

Medical Device Physical Laboratory needed for mechanical function testing of reusable device after Cleaning and steam sterilization. 63 reusable laparoscopic handles tested according to the IFU for 100 repeat clean/sterilize cycles. Test the mechanical f...

Requirements:

This is not a validation, just a confirmation that the handle maintains it function after cleaning and sterilization over the expected lifetime of the device. We're on a very tight timeline and need a lab that can run the 100 cycles quickly.

View More


Description:

Analytical Chemistry Laboratory needed for active ingredient testing: Product Analysis and Certified Limits.
Chemical Analysis for heavy metals.
Analytical test to determine the end product for N-P-K.
Specific Gravity for the finished product within 3 ...

Requirements:

Analytical methods for testing of active ingredient (Citric Acid and Seaweed)

View More


Description:

Physical Laboratory needed for Optical testing for quality inspection of optical components, such as lens and mirror for Focus length, surface optical quality etc.. 2-3pcs of samples

Requirements:

Focus length, surface optical quality etc.

View More


Description:

Physical Laboratory needed for CSMU Testing to SAE AS 8039 rev A7.2.1 impact shock7.2.2 Penetration Resistance7.2.3 Static Crush 7.2.4 Fire Test CSMU Testing,
1. UUT size
A and A? - 105mm x 80mm x 55.5mm
B and B? - 105mm x 80mm x 64.5mm
C and C?...

Requirements:

SAE AS 8039 rev A7.2.1 impact shock7.2.2 Penetration Resistance7.2.3 Static Crush 7.2.4 Fire Test

View More


Description:

Packaging company needs physical laboratory to determine activity of sulfur capture of limestone that used for boiler. .

View More


Description:

Physical Laboratory needed for phsycial tests under the european standar EN 388: 2003 on cut resistant gloves made of HPPE.1 Resistance to abrasion2 Blade cut resistance3 Tear resistance4 Puncture resistance

If so, please send the quote.

Requirements:

1 Resistance to abrasion2 Blade cut resistance3 Tear resistance4 Puncture resistance

View More


Description:

India Physical Laboratory needed for tube testing

View More


Description:

Asia physical laboratory needed for circuit board Testing of coated board ( 210) gm. Grammage ,Thickness,Brightness,Whiteness,Surface Smoothness, and all the spic you can

Requirements:

Grammage ,Thickness,Brightness,Whiteness,Surface Smoothness, and all the spic you can

View More


Description:

India physical laboratory needed for cigaretter paper testing for paper board whiteness for cigarette industry.

View More


Description:

Physical Laboratory needed for ISO kink testing per ISO 13868, Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Name identification supplementary services Annexure ...

View More


Description:

Physical Laboratory needed for downstream analysis of fiber migration from a liquid filter media.

View More


Description:

India Product Safety Laboratory needed for RFQ on European Commission Directive Testing required for Pencil Sharpner as per EN 71-1:2014. Safety of toys - Part 1: Mechanical and physical properties.

View More


Description:

India biophysical laboratory needed for dental implant testing: Dynamic fatigue testing ISO14801 on dental implants to ISO 14801, Cyclic load testing on dental implant at 15Hz -5 million cycles . 20 implant testing in a span of 2 years.

Requirements:

ISO14801

View More


Description:

Physical Laboratory needed for Optical transmittance Transmittance testing of quantity = 2 (1.00" OD x 0.0275" Thk Diamond windows) for 400 - 700 nm and 7500 - 14000 nm bands.

View More


Description:

Pharmaceutical GMP Physical Chemistry Laboratory needed for full solid state analysis of particles PSD analysis in Active Pharmaceutical Ingredients
XRD analysis in Active Pharmaceutical Ingredients
XRD analysis in Finished Dosage Form (tablets, gran...

Requirements:

The lab should have the following equipment:1. Laser diffraction, Malvern wet and dry (Use: Control of particles)2. X-ray Powder Diffraction (XRD) (Use: Crystal form and amorphous material. Determination of % crystallinity)Lab should also be certi...

View More


Description:

Asia Physical Laboratory needed for RCA Certificate Testing under Code of Practice GU01 Approval of flexible gas tubing for Low Pressure Applications

Requirements:

Certificate issued by RCA

View More


Description:

Northern California Physical Laboratory needed for Physical Properties Testing: (melting point, heat of fusion, thermal conductivity) Modulated DSC would be a preference. 5-10 samples to begin with.

Requirements:

Nothing in particular, ASTM would be great.

View More


Description:

Physical Laboratory needed for DIN Testing of concreat to DIN 52108 - Concrete wear test using the Bohme grinding wheel method.

View More


Description:

Large Consumer Products Company needs polymer physical chemistry laboratory for Pore size distribution and porosity Pore characterization of hollow fiber polymer membranes

Requirements:

Pore characterization of hollow fiber polymer membranes

View More


Description:

Physical Optical Laboratory needed for transmittance measurements on an optical assembly. The assembly is 7" in diameter and 1" thick, with a clear aperture of 6", but we do not need to measure the entire aperture; spot testing is adequate. We are primari...

View More


Description:

University Engineering Research Scientist needs India physical laboratory for steel testing to EN Standards: fracture toughness (K1C) for En19,En24 and En25 steels.

View More


Description:

Large electronics company needs United States, Japan or Europe Physical Laboratory for ASTM D2628 neoprene testing: Physical Test for Polychloroprene(Neoprene) Elastic Joint Seal Following ASTM D2628
- Tensile Strength
- Elongation
- Hardness
- Oven A...

View More


Description:

Physical Weathering Laboratory needed for Awning testing for snow and wind load. Determine load carrying capacity

Requirements:

Determine load carrying capacity

View More


Description:

Oil Laboratory needed for Automatic Transmission Fluid (ATF) testing: oil side thermal cycle test per the below on 3 or up to 6 units (1/2" NPT connections) . An additional TOC flow loop will need to be present to allow for the TBV wax valve actuation t...

View More


Description:

Physical Laboratory needed for comparison testing of two electrical fuse terminals for material strength and hardness, as well as the memory and spring back over repeated insertions. We would send five pcs of both terminals for evaluation. These come from...

View More


Description:

Physical Laboratory needed for UV testing of plastic roof vent . We want ton know how this vent will age and/or long it will it the life expectancy is for this product.

Requirements:

General UV testing, we are not following a protocol unless you suggest one.

View More


Description:

Cosmetics Manufacturer needs laboratory experienced with Amazon.com and Walmart required testing for testing of highly concentrated (> 95%) sucrose solution to be used as hair remover by adhering to the hair and physically pulling it out. It falls under t...

View More


Description:

Asia Cosmetics Laboratory needed for analytical chemistry and microbiology testing of skin care product 1) Physical Tests - Appearance of liquid - pH - New Volume 2) Heavy Metal Tests - Lead - Mercury - Arsenic - Cadmium 3) Mirobiological Tests - Total ...

View More


Description:

European manufacturer needs Florida or USA Physical Laboratory for ANSI Testing: System testing to the US Market. Their systems are describe below:
1. Prop formwork system for slab.
2. Load-bearing scaffolding system fro slab.
3. Frame formwork system ...

Requirements:

ANSI

View More


Description:

Physical Laboratory needed for UL Certification Testing for UL - CERTIFICATE (FIRE RESISTANCE CERTIFICATE) FOR Gypsum BOARD STEEL PROFILE (FASTNERS)Gypsum BOARD STEEL PROFILE (FASTENERS)
OMEGA, C-CHANEL, PERIMETER ANGLE

Requirements:

FIRE RESISTANCE CERTIFICATE - UL-CERTIFICATE

View More


Description:

Bergen County New Jersey physical laboratory needed for tensile strength testing of T shaped weld sample with 1" OD chromoly pipe that is .120" thick. Required tensile strength to break the pipe is calculated to be ~60,000 pounds (~100,000psi).

Requirements:

Tensile test, 60,000 pounds, must break our pipe

View More


Description:

Europe mechanical and physical laboratory needed for automotive parts testing: ball joints testing for stress resistance, dust seal, tests in environmental chamber.

Requirements:

Confidential (Later)

View More


Description:

Utility company needs laboratory for reliable condition assessment, investigation and IEC Testing on a utility transformer corrosive sulphur problem to assist us with understanding of our problem, assist with identifying causes and possible solutions. V...

View More


Description:

Physical Laboratories needed for Insulation Testing to SAEJ2302 - Thermal Effectiveness of Sleeve Insulation

Requirements:

SAEJ2302

View More


Description:

GLOVE MANUFACTURER NEEDS PHYSICAL LABORATORY FOR CONTACT HEAT RESISTANCE TESTING 15000 F TO 2000 F

Requirements:

confidential

View More


Description:

ASIA PHYSICAL LABORATORY NEEDED FOR WIND TUNNEL TESTING OF AIRFOIL SECTION: 1/2 SCALE MODEL TESTING OPEN ENDED WIND TUNNEL

Requirements:

1/2 SCALE MODEL TESTING OPEN ENDED WIND TUNNEL

View More


Description:

USA Physical Laboratory needed for absorption and transmission testing of optics 4 -2" dia ZnSe lenses, polished and unpolished samples

View More