Laboratory Outsourcing and Scientific Sourcing Center

MULTIPLE TESTING & SAMPLES
LONG-TERM
Independent clinical diagnostic laboratory needed to analyze human sputum for inflammatory markers and study sputum rheology.

MULTIPLE TESTS
Contract Research Organization CRO needed for Suture pull out testing, tensile strength testing of biomaterials used in surgical applications

Oil Laboratory needed for rheology testing of 3-5 oil-based yield-stress fluids through rheological testing. My main focus is on the thixotropy of the system, and I may be in...

USA LABORATORY LONG-TERM TESTING
Large Corporation needed USA ISO 17025 Contract Laboratory for quarterly testing of the following:
1. Viscosity
2. Osmolality
3. Rheology...

NEW PRODUCT DEVELOPMENT
USA LABORATORY
MULTIPLE TESTS
USA Cosmetics Contract Laboratory needed to formulate an ink suitable for screen printing which will provide a simila...

MULTIPLE TESTS
Chemical Company needs Contract Analytical Laboratory for potential rheology testing. I was wondering if you have rheometers to do tests: 1) dynamic frequency ...

Materials Laboratory needed for Capillary Rheology of PVC:
1) Viscosity flow curve ( 10^3 to 10^5)
2) Die swell measurement
2) Haul off test
Please provide the lead tim...

Contract Laboratory needed for rheology amplitude sweep experiments on gels

Pharmaceutical Laboratory needed for ISO 10993 and ISO 15798
physical chemistry testing of opthalmic hydrogel class IV (injectable): Rheological analysis, spectral transmi...

University Researcher needs India Materials Laboratory for rheological studies of pharmaceutical samples.

Large Pharma needs Laboratory for viscosity testing using the following instruments. HAAKE RS75RheoStress or the HAKKE RheoStress600 rheometers

Pharmaceutical Bioanalytical Laboratory needed for rheological testing of elasticity and viscosity on samples of human mucus.

Polymer laboratory needed for rheology testing to determine the viscosity on Polyamide 06. Is this possible at your end ?

Construction materials laboratory needed to conduct ASTM and AASHTO testing of asphalt binder to ASTM D2006 Method of Test for Characteristic Groups in Rubber Extender and Pro...

Medical Device laboratory needed for physiochemical testing including thermal, mechanical and dynamic analysis to support the development of a new transdermal patch. Studies t...

LONG-TERM TESTING Pharmaceutical analytical laboratory needed for in vitro release testing & physical characterization (viscosity and rheology) for drugs in solid oral dosage ...

NABL materials laboratory needed for rubber rheology testing of optimum cure time & temperature of a liquid silicone rubber using a rheometer.

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM D4976 + ASTM D5203, dens...

Food laboratory needed for sugar syrup testing for rheology studies for analyzing surface tension, viscosity and elasticity profiles for various sugar syrups with added food g...

Cosmetics laboratory needed for rheology testing of creams and oils for Shear flow, yield stress, oscillatory profiles

Oil Laboratory needed for DIN grease testing along with determination of rheological resistance.

Oil Laboratory needed for DIN Grease Testing to DIN 51816-1 Testing of Lubricants; Conveying Characteristics of Greases; Determination of the Rheological Resistance by the Sh...

Laboratory needed for DOT Testing to ISO Standards: (i) Viscosity test. The flow time in seconds is determined at 23 °C (73.4 °F) using the ISO standard cup with a 4 mm (0.16 ...

Laboratory needed for gas flooding-reporting on slim tube, gas injuction and flow assurance

Oil Laboratory needed for ASTM oil testing. Need No 6 Oil tested for kinematic viscosity at 40C and density.

Technology laboratory needed for materials testing to develop the Flow Characteristic Chart (Pressure Drop vs Flowrate) for product.
Flow rate ranges from 0 to 760 lpm

Materials laboratory needed for rheology testing of adhesive used in pharmaceuticals. Please provide quote.

Europe Pharma needs FDA GMP analytical chemistry laboratory for Rheology analysis according to GMP. to analyze a type of Silicon with Rheometer (ODR), T90 and 165 C. Acceptan...

LONG-TERM TESTING Materials laboratory needed for rheology testing of bio sealant to find its gel time(i.e time required for the substance to change from liquid to gel).

University Researcher needs materials laboratory for rheological testing of EPDM rubber compound which include viscosity vs shear rate ,dynamic modulus loss and storage moduli...

Materials laboratory needed for rheology testing of Analytical work monomers of polyester textiles

California Materials laboratory needed for ASTM rheology Testing to determine levels of cure in samples of liquid silicone rubber to ASTM D6601-12, Standard Test Method for R...

Manufacturer of septic-filled banana puree, both acidified and not acidified needs food rheology laboratory to determine rheological properties of the puree ( n and K coeffici...

Large food manufacturer needs food laboratory for sauce analysis for viscosity/rheology of starch samples or sauce samples containing starch.
submit 1 - 2 samples periodical...

Canada Cosmetics Laboratory needed for cosmetic testing: Stability Testing, Viscosity Testing & Rheology testing on Personal Care Ointments and Creams

India materials laboratory needed for rheology testing

Southern California Rheology Laboratory needed for Rheological testing viscosity vs. shear rate
using a capillary rheometer.

Europe Analytical Chemistry Laboratory needed for ASTM Testing: polymer rheology and physical testing Capillary rheometer, Ash, FTIR, moisture, tensile etc

Europe materials laboratory needed for rheology testing: Rheological profile of inks

USA analytical chemistry laboratory needed for testing specific gravity, kinematic viscosity, ppm iodine, ppm hydrogen peroxide, and rheology description (e.g. newtonion or th...

West Coast USA Analytical Chemistry Rheology Laboratory needed for High Shear Viscosity of dilute solvent base ink

West of China (Zhejian province or Shanghai)ISO 307 (2007-05) Rheology Testing Laboratory required to determination of viscosity number of PA materials

South-Eastern USA Rheology Laboratory required for Viscosity(cone and plate)rheological testing. Currently we use a HAAKE VT550 and PK100d cone and plate system. The gap is s...

UK analytical chemistry / rheology laboratory needed for viscosity, surface tension,and rheology testing of Acidic viscous polymer solution

California Rheology Laboratory needed for study - Plot of Viscosity v/s shear strength.

USA Materials Laboratory needed for rheology testing of an asphalt-based compound for viscosity v/s shear rate by pressure-capillary rheometry at 280F. The material will outg...

FDA GMP Analytical Chemistry Laboratory needed for Ph. Eur rheology laboratory needed for viscosity measurements,
Creep measurements
Oscillation experiments

China ISO 9001 or 1702 mechanical laboratory needed for ASTM mechanical testing by DSC, DMA, TGA, rheology, mechanical testing (Instron), impact testing, GPC, HPLC, GC, NMR, t...