Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Test Laboratories to perform their Test Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Test laboratory that would like more information on these Test projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Electrical Laboratory needed for ASTM Testing of U-PVC cable ducts for Shore Hardness ( Type D ) ASTM D 2240 2 Coeffecient of linear Thermal Expansion BS 3505/ 3506/ ASTM D 696 3 Insulation resistance at 60 C BS EN 50086 / BS EN 61386-1 IEC 60093 4 Dielectric strength at 27 C BS EN 61386-1/ ASTM D 149 5 Specific Heat BS 3505/ 3506
Construction laboratory needed for materials and toxicity testing of naval thermal insulation testing to various standards including: NCD 1427 : SPECIFICATION FOR MINERAL WOOL MARINE BOARD FOR THERMAL AND ACOUSTIC INSULATION ON BOARD INDIAN NAVAL SHIPS
NCD 1433 : SPECIFICATIONS FOR ELASTOMERIC NITRILE THERMAL INSULATION FOR USE ONBOARD INDIAN NAVAL SHIPS
Clinical research laboratory needed for BIS compliant consumer safety study including patch test and sting test for baby wipes: 1. Sensitive skin volunteers 2. RIPT on 24 screened volunteers as per BIS 3. In use tolerance for 2 weeks (24 volunteers) Review: By Ethics Committee Principle Investigator: Dermatologist
Electrical laboratory needed for electrical certification and acceptance testing of transformers, arresters, and switches including current transformers 72.5KV and 145KV MR 200-400-600-800-1000-1200/1/11/5; surge arrester 72.5 and 145 KV; central opening switch 72.5KV and 145 KV 3150 Amp; voltage transformer 72.5KV and 145KV; power switch tanks monopolar live tension for 145KV SF6 gas insulated; power switch tanks tripolar for dead tension 72.5Kv and 145KV SF6 insulated. China
FDA GMP Pharmaceutical bioanalytical laboratory needed for heparin testing for determination of Anti Factor IIa activity on heparin sodium API samples according to Ph. Eur. 9.2, monograph 01/2017:0333
Analytical chemistry laboratory needed for water testing for electrical conductivity, pH, total dissolved solids, total suspended solids, and trace minerals / pesticide / drug residues / impurities including potassium, sodium, magnesium, calcium, ammonium, ammonia, phosphorus, phosphate, bromine, chloride, sulphate, hydrogen sulphide, fluoride, nitrate, nitrite, silicon, colloidal silica, total silica, carbonate alkalinity, bicarbonate alkalinity, hydroxide alkalinity, lithium, boron, aluminum, titanium, vanadium, chromium, manganese, iron, cobalt, nickel, copper, zinc, arsenic, strontium, barium, rubidium, molybdenum, cadmium, cesium, lanthanum, lead, uranium, total mercury, tungsten, selenium, total organic carbon, cyanide, phenolic compounds, pesticide and organic residues, DDT, heptachlor and heptachlorepoxide, hexachlorobenzene, lind
ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standard methods: OECD107 Partition Coefficient (n-octanol/water): shake flask method , OECD 117 Partition Coefficient (n-octanol/water), HPLC method, and OECD123 Partition Coefficient (1-octanol/water): slow-stirring method
Large company needs laboratory for UL Tilt Test - UL certification for custom kiosks means the stability of the units. These tests are known as the slide test, force stability test and 10 degree status tip static tip stability test. The tests are baselined against the normal 5 year old child. The usual precaution is if the unit is subject to a push force of 9Kg in any direction.
LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers specifications WSS-M2D496 (Ford), GMW 14196 (General Motors), MS-AY-549 (Chrysler-Fiat) including: WSS-M2D496 Density to ASTM D3574-16 Test A Tensile Strength to ASTM D3574-16 Test E Elongation at Break to ASTM D3574-16 Test E Tear Strength to ASTM D624 Die C Compression Set to ISO 1856 Method A Compression Deflection Stress ISO 3386-1 +A1 Heat Aging to ASTM D3574-16 Test K, ISO 3386-1 +A1 Humidity Aging to ASTM D3574-16 Test J, ISO 3386-1 +A1 Dimensional Stability to WSS-M2D496, 3.5.10 Fogging to SAE J1756 Odor to FLTM BO 131-03 Variant B Cold Flexibility to FLTM BN102-01 Method A Solvent Resistance to WSS-M2D496 Flammability to ISO 3795 GMW 14196 Testing Emissions per GMW
LONG-TERM TESTING Materials laboratory needed for ASTM & FED-STD textiles testing for non-fibrous and soluble materials content using soxhlet extraction procedure to FED-STD-191 and absence of detectable silicone grease and oil determined by Fourier Transform Infrared Spectroscopy (FTIR) analysis by sample extractions using ASTM D 1836
Cosmetics and Personal Care Products Manufacturer needs laboratory for microbiology and analytical chemistry testing of disinfectants / antiseptics / sanitizers to several BS EN standards including 1275:2005, 1276, 1500:2013, 1650:2008+A1:2013, 13623:2010,13697:2015, 13704:2002, 13727:2012+A2:2015, and 14348:2005
LONG-TERM TESTING Pharmaceutical analytical chemistry laboratory needed for raw vitamin and nutritional supplement materials purity & impurity testing by HPLC analysis for: 72-18-4, L-Valine; 3040-38-8, N-Acetyl-L-carnitine; 5785-44-4, Tricalcium Dicitrate Tetrahydrate; 3344-18-1, Tri Magnesium Dicitrate; 6100-05-6, Potassium bicarbonate; 4468-02-4, Zinc(II) Gluconate Dihydrate; 10024-66-5, Trimanganese Dicitrate; 527-09-3, Copper Gluconate; 10060-12-5, Chromium(III) Chloride Hexahydrate; 13410-01-0, Sodium Selenate; 13446-49-6, Potassium Molybdate; 1303-96-4, Sodium tetraborate decahydrate; 7681-11-0, Potassium Iodide; 919-16-4, Trilithium Citrate; 135459-87-9, Strontium Ranelate; 127-47-4, Vitamin A: Retinylacetate (all trans); 67-97-0, Vitamin D3: Cholecalciferol; 58-95-7, Vitamin E: D-Tocopherylacetat; 84-80-0, Vita
START-UP COMPANY. Cosmetic microbiology laboratory needed for stability and USP testing of skincare product to USP 51 preservative challenge testing, USP 61 microbial content / bioburden testing, stability and bacterial contamination testing of a skincare product.
LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeric liquid coating used for roofing on commercial building. Polymer coating that instead of coating and drying within two hours discharged into storm drain causing notification of Fire department and Hazardous Materials units.
LEGAL. Microbiology laboratory needed for bacterial contamination testing of a powdered dietary supplement using USP standards 2022 and 2023 (which mirror USP 62 and 1111 respectively for pharmaceuticals), the FDA Bacteriological Analytical Manual (BAM) Chs. 3, 4, 12, and 18, and AOAC standards.
Consumer product laboratory needed for CPSC safety testing of an arts and crafts product constructed out of urethane, water based contact cement, hardboard, and paper.
Bioanalytical laboratory needed for analytical chemistry and microbiology testing to support stability extension of hydrolyzed collagen used in medical devices including Need testing for viscosity, clarity, color, ash, moisture, pH, SO2, Chromium, Lead, Heavy Metals, PCP, Fluoride, Protein, Bulk Density, Total Bacterial Count, Salmonella, E. Coli
Polymer laboratory needed for nondestructive NDT Testing: heat resistance testing of an acrylic lens according to IWA MIL-PRF-5425. Also, need physical properties such as elongation, tensile strength testing of O-rings made out of 51+/-5 durometer EP rubber compounds according to E5001B, E1100-50, EA454-50 or chemically equivalent.
Polymers laboratory needed for thermal, dielectric, and insulating testing for properties of two components polyurethane resin according to the following standards:
Dielectric strength (50Hz -1mm) kV/mm - CEI 60243-1
Dielectric constant (100 Hz) - CEI 60250
Dissipation factor, tan delta (100 Hz) - CEI 60250
Volume resistivity (1000V) ohm.cm - CEI 60093
Thermal conductivity W/m.K - ISO 2585
Coefficient of thermal expansion (CTE) (-25°C to 20°C) and (+55°C to +130°C) ISO 13359
Water absorption (23°C -24 hours) - ISO 62
NIOSH laboratory needed for industrial hygiene testing: hazardous material surveys for asbestos, lead (Pb), tributyltin (TBT), poly-chlorinated biphenyls (PCB), and mercury. Please provide a quotation for asbestos sampling, screening, and analysis (by PLM method).
Environmental laboratory needed for radioactivity testing of soil a. Gamma Spectrometry (direct measurement) - product must emit less ionising radiation than the global median for soils, namely: CK < 400 Bq / kg; CRa < 35 Bq / kg; and CTh < 30 Bq / kg. Alternatively, b. Chemical Composition (indirect measurement) - the finished product must not contain more than: U8 mg /kg; Th15 mg /kg; and K5% by mass.
Analytical chemistry Laboratory needed for EU and FDA compliance testing of dietary supplements to AOAC, FCC, USP, etc.) including purity (HPLC-UV, NMR, FTIR, LC-MS/MS), moisture content (Karl Fisher thermogravimetric analysis), heavy metals, endotoxins, residual organic solvents, and absence of DNA
We can provide you with a number of batches of our product and we would like to know how many would be needed to receive a Certificate of Analysis.
The samples can be provided in powder/granulated form. The analysis would be a once off, on different batches if required.
Material analysis laboratory needed for the following testing on plastics:
Environmental Cycle test after 50 cycles according to PV 2005
Lightfastness according to PV 1303 after 3 period of exposure
Grey scale level, color and grain according to color combination, color consistency according to VW 501 90, resistance to open air weathering VW 50185: without complaints, temperature resistance and operable from -40ºC to 90ºC, emission behaviour according to VW 501 80, and flammability according to TL1010
Physical chemistry laboratory needed for OECD testing to OECD Test No.123 Partition Coefficient (1-Octanol/Water): slow-stirring method or shake flask method.
Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV stability testing in accordance with ES ISO 4892-2 , performance at elevated temperatures is in accordance with ACI440.3R-04 Section B.6 Accelerated test method for alkali resistance of GRP bars, and suitability, Durability,
Packaging Laboratory needed for Medical Device Package Design Qualification Testing of a UN 4G Fiberboard Box With 47 x 40 x 1.5-mil poly Red Bag with twist tie and knotted closure This package is not certified for shipment by air. Box Information: 32# ECT (38-26C-38) / D/C Special Design style / ?C? flute / glued joint / Extended design carrying handles / Auto bottom / interlocking top Part Number: 17 x 14 x 19 Outer Dimensions: 18? x 15 ¼? x 20 1/8? (24 ¼?) Inner Dimensions: 17 ¾? x 15? x 19 5/8? Manufacturers Joint: Glued with a 1.25? inside tapered flap Tare Weight: Box: 1.8 lbs. Basis Weights
Materials Laboratory needed for testing on a steel grade silica ceramic blanket.
Flammability to ASTM F 1462.
Thermal Conductivity to ASTM C518-19983.
Thermal Shock Resistance to ASTM D-30324.
Chemical Sustainability to ASTM D-6455.
Mineral Wool Thermal Insulation to IS 3144:1992
Heavy Metals Resistance to Biological Catching (Hazardous Substance)
Nutraceutical / Dietary Supplement analytical chemistry laboratory needed for LONG-TERM TESTING - monthly quality control testing of dietary supplements and active elements distilled from aromatic and medicinal plants, for MSDS 1- Appearance 2- Loss on Drying 3- Melting Point Range 4- Residue on Ignition 5- Organic Volatile Impurity 6- Heavy Metals 7- Purity 8- Identification 9- Assay (Please send price / delay for analysis, knowing that there will be more than three analyses per month).
Molecular Biology / Bioanalytical Laboratory needed for up to three university-based experiments involving human cell lines:
Experiment #1: Test up to 5 human cell lines (i.e. liver, kidney, etc...). Formalinize these cell lines in order to have a bank ready to be used. Then culture peripheral blood stem cells,apply the different formalin treated cells into the growth media, and determine what occurs. I am looking to determine if differentiation is stimulated toward the cell lines that were added. Is there inhibition or is there no reaction?
Experiment #2: Culture peripheral stem cells, add various growth factors (ex. neupogen), and determine if cell expansion is stimulated
Experiment #3: Growth of autologous stem cells on an autologous feeder layer (cells and feeder layer from the same patient). Looking to find what numbers
Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing, with test parameters according to:
- Test procedure: C
- Test temperature: 40 °C
- Test duration: 240 h
- IP69K rating (DIN 40050-9 standard extending the IEC 60529)
- ENV 008C chemical testing
Food analytical chemistry laboratory needed for dairy testing: silver ion thin layer chromatography testing followed by GC/MS testing of a milk sample to quantify total fatty acid content including CLA (C18:2), two major isomers (c9, t11 and c10, t12), and omega fatty acid ratio (6:3).
Physical laboratory needed for DIN Testing of automotive parts to 5.9 Solar Radiation Test as per DIN 75220, D-OUT-F Test duration 1 cycle = 240 hrs. Test chamber temp = 42 oC, RH 65 % Radiatlon intensity 1000 W/m2 Visual evaluation 5.10 Dust Test - execution as per ISO 16750-1, resp. ISO 20653 - Preparing of the test samples; without sealing and without producing of testing 1 cycle: - Swiriing of dust in chamber for 6s - Dust deposits for 20 min - Total of 20 cycles - Type of dust: Arizona dust A2 Operation mode 3.2 for 5 min (necessary to specify operating voltage) - Evaluation - dismounting of sample and check of dust ingress (necessary to specify) - 1 sample tested in 1 load
Medical device company needs clinical product safety laboratory for in-vivo, in-vitro and microbiology testing of disposable feminine pads including:
Surface device testing with just contact to the skin or breached/compromised surface (due to labial contact). We will do a limited exposure (less than 24 hours) testing.
Microbiology testing as pads release oxygen and slightly acidify the pH within the pad once blood reaches our patented powder. We want to see if it has any effect on microbes.
Measure the pH after blood has entered the pad to see how the pH is affected after blood has entered.
Amount of oxygen released per pad, the amount of CO2 absorbed per pad and the amount of humidity absorbed per pad?
Food laboratory needed for ISO spice testing of saffron to ISO standards ISO 3632specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers. and ISO 3632-1-2010) . Please specify the cost/test; quantity of saffron required; and turn around time once the lab receives the material.
Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:
1. SWL loading IEC 61537 Cl. 10.2-10.8 (and Annex D.1) (to residual deflection measured by instruments with a resolution of 0.5mm or better and a precision of 0.1 mm or better in all range of the equipment per cl. 5.9).
D.1 states Trays mesh, solid, perforated to use load distribution plates that are rectangular, 120 mm by 40mm with a tolerance of 1mm.
Food importer needs ISO 17025 food laboratory for imported oil certification testing of food containing oil derived from beef including: Insoluble impurities not exceed than 0.15% in weight? for the beef oil used. (tested by accredited method). 2. accredited method or not? Please provide a quote as well as specify how long will it take for the test result? (this is quite in a hurry, we need the result soonest) - How much sample needed?
URGENT TESTING FDA GMP Medical device preclinical laboratory needed for product safety and toxicity studies of a plastic dental aligner. Risk Assessment in regards to human exposure (oral, dermal, inhalation) is requested for a dental aligner and support-removal media. The dental plastic aligner is thermoformed onto a 3D printed mold that was previously soaked in our support-removal media.
R&D company needs virology laboratory for disinfectant efficacy testing against multiple viral strains: Avian Adenovirus Adenoviridae Group 1 2 Avian Adenovirus Adenoviridae Strain EDS 127 3 Avian Coronavirus Coronaviridae 4 Birnavirus Birnaviridae 1 5 Chicken Anaemia Virus Circoviridae 6 Enterovirus Picornaviridae 7 Herpesvirus Herpesviridae AlphaHerpesVirus 8 Herpesvirus Herpesviridae GammaHepesVirus 9 Orthomyxovirus Orthomyxoviridae H5 10 Orthomyxovirus Orthomyxoviridae H7 11 Orthomyxovirus Orthomyxoviridae H9 12 Paramyxovirus Paramyxoviridae APMV-1 13 Pneumovirus Paramyxoviridae A 14 Pneumovirus Paramyxoviridae B 15 Pneumovirus Paramyxoviridae C 16 Pneumovirus Paramyxoviridae D 17 Poxviru Poxviridae 18 Reovirus Reoviridae S1133 19 Reovirus Reoviridae 1733 20 Reovirus Reoviridae 2408 21 Reovirus Reoviridae ERS 22 Retrovirus Retrovirida
Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.
1) Copper conductor, Mica tape, XLPE insulation, LSHF Bedding, Galvanized SWA and LSHF final Sheath.
3) Copper conductor, Mica tape, XLPE insulation, LSHF Bedding, AWA and LSHF final Sheath. This cables will be tested as per ( BS 6387 Cat C W & Z ).
Pharmaceutical laboratory needed for ICH, FDA, and USP testing on OTC sunscreen API and finished topical products including: 1) stability test on our finished sunscreen products for the claimed shelf life of 3 years as per the US FDA requirement, 2) preservative challenge test as per the USP on finished sunscreen products, 3) assay and purity of the following active raw materials: avobenzone [INCI name : Butyl Methoxydibenzoylmethane] 2. homosalate 3. octocrylene 4. octisalate [INCI name : ethylhexyl salicylate] 5. oxybenzone [INCI name: benzophenone]
Please provide cost of each test, turnaround time estimate, and sample quantity required for assay and purity testing of each active API.
Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including: Raw material tests as per ASTM D4976 + ASTM D5203, density, melt flow rate, elongation at break, tensile strength, UV resistance, stress crack resistant, impact test as per SASO-GSO 1863.
Analytical chemistry laboratory needed for test method development and specific testing of sleep related quick release and extended release coated dietary supplement including dissolution testing to mimic digestion. Please also quote for heavy metals and microbiology testing.
Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers , emissometer, emittance and ASTM C1549, Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer. Company from Turkey.
Food laboratory needed for sugar syrup testing for rheology studies for analyzing surface tension, viscosity and elasticity profiles for various sugar syrups with added food gums using the following methods:
Wilhelmy plate method for surface tension is desired.
Cone and plate or falling plate rheometry
Cosmetic laboratory needed for glococorticoids testing in a skin cream. Quote needed.
Food analytical chemistry laboratory needed for 2 types of bean flour testing for
phytic acid tannins trypsin inhibitor alpha-amylase inhibitor polyphenols oligiosaccharides (raffinose, stachyose, verbascose) lectins (phytohemagglutinin) saponins complete nutritional analysis including amino acid profile
If possible, we would like a price for each individual test.
Thank-you so much for this information.
Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:
1. Leaching test - Based on EN12457 - 2 Part 2 and EN ? 12506
2. Sulfur test - Based on ISO 4689-3 : 2004
3. Corrosion test - Based on LPR method (Linear Polarization Resistance Method)
Automotive laboratory needed for ASTM D5500 (Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation) or D5598 (Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling) testing of a liquid. Quote and turnaround time needed.
Large Biologics Product company needs GLP Toxicology laboratory needed for Human Health and Safety Testing as follows: Acute oral infectivity and toxicity, Acute pulmonary infectivity and toxicity, Intravenous infectivity, Acute Dermal toxicity, Irritation, Dermal Irritation Study, Genotoxic Potential for 16 samples, including 4 studies for End Products, and 12 studies for bacterial actives.
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recommended practice providing design guidelines, test procedures, and performance requirements for 360 degree optical warning devices and selective coverage defined as any light that provides greater coverage then 40 degrees left-to-right but less than 360 degrees. Intended for authorized emergency, maintenance and service vehicles. Lighting tested from 5 degrees upward to 5 degrees downward.
Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additional polymer (which may also be a polyacrylate), water and at least two more non-polymeric materials.
Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines:
- Purity (according to ASTM D6806)
- Acidity (according to AHRI 2008 Appendix C to 700-2014 Part 1, to be confirmed by the 2BTP producer)
- Water content (according to AHRI 2008 Appendix C to 700-2014 Part 2)
- Nonvolatile residue (according to AHRI 2008 Appendix C to 700-2014 Part 3)
- Suspended matter or sediment (visual inspection during Nonvolatile residual test)
- Presence of Stabilizers (FTIR spectrum analysis to be performed)
Food Laboratory needed for cabbage testing including: nutritional analysis, pesticide, heavy metal and microbiological contamination analysis of 2 varieties of cabbages we sell in Mongolia. Specific tests include -Pesticide contamination (How many kinds of pesticides do you test, and how much?)-Nutritional analysis, including moisture, carbohydrate, dietary fiber, ash, vitamin C, B6, folic acid, manganese and potassium (Do you have any other recommendation and how much are these tests?)-Heavy metal contamination (Cd, Pb, Hg) also how much? -Microbiological contamination.
Microbiology Laboratory needed for ASTM or ISO biodegradability testing to ISO14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide or ASTM D5338 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
OECD compliant and EPA GLP Environmental toxicology laboratory needed for large suite of toxicology tests on pesticide.
OECD 401/20/23/25 Acute Oral Toxicity
OECD 402 Acute Dermal Toxicity
OECD 403 Acute Inhalation Toxicity
OECD 404 Acute Dermal Irritation
OECD 405 Acute Eye Irritation/Corrosion
OECD 406/29/42 Skin sensitisation
OECD 407 Repeated Dose 28-day Oral Toxicity Study in Rodents
OECD 408 Repeated Dose 90-day Oral Toxicity Study in Rodents
OECD 410 Repeated Dose Dermal Toxicity: 21/28-day Study
OECD 471 Bacterial Reverse Mutation Test
OECD 473 In Vitro Mammalian Chromosome Aberration Test or 474 Mammalian Erythrocyte Micronucleus Test
It is also likely that following successful testing we will need to move to other standard toxicity, metabolism and environmental studies. Appreciate co
Packaging laboratory needed for complete packaging testing of 7 SKU's of products including: material testing, and benchmark packaging Bottles: Drop test, seepage test, topload test Caps: Capping force test, torque test Labels: Fadeometer test, chamber test, resistance test - Rigids: Bottles, Caps, Jars - Flexibles: Labels, Films - Paper-based: Corrugates, Cartons - Others: Pumps, Tubes
It would be great if you could share your credentials outlining: - Specific tests you offer in the above categories - Turnaround time - Quotations
If you could give me a call today, I am happy to discuss our requirements in more detail.
Food laboratory needed for milk powder quality testing :
Heat Instability: Alcohol Test > 75% IDF: 133:1981
Clot on boiling test Negative K.S.S 150:1982
Objectionable matter Minimal/25g MAF Dairy Division
Foreign matter Absent/25g MAF Dairy Division
Inhibitory substances 0.005 IU/ml Max MAF Dairy Division
Antibiotics Negative MAF Dairy Division
Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components 1. Leaching test - Based on EN12457 - 2 Part 2 and EN - 12506 2. Sulfur test - Based on ISO 4689-3 : 2004 3. Determination of resistivity : ASTM G57-06 4. Corrosion test - Based on LPR method (Linear Polarization Resistance Method)
Materials Laboratory needed for Corrosion testing of molybdenum disulfide according to AMS-M-7866A. Tests required are:
1.Corrosion resistance in accordance with MIL-STD-791 2.Steel and copper corrosion. Performed on steel panels conforming to MIL-S-7952 and copper panels conforming to QQ-C-576.
GLP metallurgical laboratory needed for AOAC 2006.03 standard or EPA6010/6020 testing for Aresenic, Cadmium, Cobalt, Molybdenum, Nickel, Lead, Selenium, and Zinc.
Also, need Hg analysis using EPA747A or 7471A or 7473 or 7474. Digestion for EPA methods: 3050B/3010/3020/3051.
Nutritional laboratory needed for labeling claims testing of vitamins: qualification and quantification testing of vitamins in a premix powder to meet labeling claims for the following: Niacinamide 20 mg D-Calcium Pantothenate 5 mg Cyanocobalamin 4.97 mcg Pyridoxine HCl 5 mg Caffeine, anhydrous 150 mg Inositol 30 mg Taurine 1001 mg Serving size is 1340 mg with a maltodextrin filler.
Food microbiology laboratory needed for microbiological standard plate count (SPC) testing and Coliforms testing per RAWMI standards: raw milk shall not contain zoonotic pathogens including: Salmonella spp., E. coli 0157:H7, Campylobacter spp., and Listeria monocytogenes. Target: a rolling three month average of less than 25 coliforms per ml raw milk; target: less than 15,000 per ml raw milk. Also, water test potable well water showing bacteria counts including coliform.
Large petroleum company needs Industrial chemistry laboratory for ASTM petrochemical testing to ASTM D8031-16 for acid number of terephthalic Acid (TA) by automatic potentiometric titration.
Medical devices laboratory needed for ISO Testing of medical breathing tubing to ISO 5367 Annex A, Annex C, Annex D, Annex E, Annex F, testing of tubing: ANNEX A: RESISTANCE TO AIR FLOW ANNEX D: LEAKAGE ANNEX E: INCREASE IN FLOW RESISTANCE WITH BENDING ANNEX F: COMPLIANCE ANNEX C: SECURITY OF ATTACHMENT OF ADAPTER TO BREATHING TUBE
Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 Permeability Coatings and Films Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7 2. Liquid water permeability: Test method EN-1062-7 3. Acid Resistance . 4)SRI
LONG TERM TESTING FDA cGMP microbiology laboratory needed for USP water testing of water for injection based on USP monograph for Sterile Water for Injection and the European Pharmacopeia (Ph. Eur.) monographs for Water for Injections in bulks and sterilized Water for Injections. Also need extractable volume and uniform volume.
Blood testing laboratory needed for analyzing samples for the following contents: Interleukin-1 beta (IL-1ß1), Erythrocyte sedimentation rate (ESR), High-sensitivity C-reactive protein (hs-CRP), Serum osteocalcin: measured using the ELSAOSTEO radioimmunoassay (IRMA), Serum hyaluronic acid (HA): measured using the Pharmacia HA Test radiometric assay,, Serum Keratin sulphate: measured by ELISA , Transforming growth factor beta (TGF-ß).
Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbiology testing:
ASTM D7661-10, Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms for compliance with latex and polyisoprene condoms.
ISO 10993-5 Biological Evaluation of Medical Devices-Part 5: Tests for in vitro cytotoxicity
ISO 10993-10 Biological Evaluation of Medical Devices-Part 10: Tests for irritation and skin sensitization
ISO 10993-11 Biological Evaluation of Medical Devices-Part 11: Tests for systemic toxicity
United States Pharmacopeia, National Formulary General Chapter <88>: Biological Reactivity Tests, In Vivo
USP <51> Antimicrobial Effectiveness Testing
USP <61> Microbiological Examination of Nonst
ISO 17025 Analytical chemistry laboratory needed for cleaning product testing: phenoxyethanol analysis (Ethylene glycol phenyl ether ) for active ingredients:- Octyl decyl dimethyl ammonium chloride - Dioctyl dimethyl ammonium chloride- Didecyl dimethyl ammonium chloride- Alkyl benzyl dimethyl ammonium chloride- Ethylene glycol phenyl ether