Most Recent weathering Laboratory Test Requests

Contract Laboratory has received the following weathering Laboratory Test Requests which need to be fulfilled! These weathering Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their weathering Laboratory Test and Scientific Research. If you need a weathering Laboratory, please Submit a weathering Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

Failure Analysis of Automotive Part

Description:

Industrial Forensics Laboratory needed for failure analysis testing on automotive part for water contamination. Water is getting past the seals in the connector and is being wicked down the wires and corotating the ECU connector. We have tested the wickin...

View More


Description:

Materials Laboratory needed for chemical analysis of polypropylene fabric to the below specifications:

1. UV content analysis. we wish to know the exact active UV stabilizer content in the fabric sample (HALS, anti-oxidants, etc.)

Please note: We ...

Requirements:

Please inform us if you have the facility to carry out these tests and, if yes, provide me with quotations and the delivery lead time once the samples reach your facility.

Thanks in advance and looking forward to hearing from you soon!

View More


Description:

Construction Laboratory needed for ANSI dry grout physical testing to two ANSI Standards 118.3 Latex Fortified Cement Based Grout: and 118.4 Modified Dry Set Cement Mortar. for dry mortar

View More


Description:

Materials laboratory needed for weathering and performance testing of coatings to determine which will preserve and protect the outdoor signs from graffiti and the sun the longest, a specific film laminate, or a spray coating such as AkzoNobel Autocoat BT...

View More


Description:

Construction laboratory needed for environmental simulation / accelerated weathering testing of Exterior Grade High Pressure Laminates HPL as per EN-438 part-6, Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Classification...

View More


Description:

Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durability in accordance with the following standards:

-AC320 (an acceptance criteria from ICC)
-Condition...

Requirements:

Laboratory must have experience of ASTM D 2247 and ASTM C 581 and also tensile testing of very strong smooth FRP bars

View More


Description:

Laboratory needed for general performance testing of tooled shower seat as well as static/dynamic load testing and rust/aluminum (weathering) testing

View More


Description:

Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure industry. The textiles are used in products that have a life expectancy of 20 years and need weathering verif...

View More


Description:

Polymer laboratory needed for UV resistance / weathering testing to ISO-21898 of a standard polypropylene (plastic) jumbo bag for stone and iron ore. Lab in India requested.

Requirements:

IS-21898

View More


Description:

Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensile strength, elongation at break, flexibility, electrical conductivity, adhesiveness, weathering testing,...

View More


Description:

LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeric liquid coating used for roofing on commercial building. Polymer coating that instead of coating and dr...

View More


Description:

Materials laboratory needed for NATO STANAG Testing of gun cases for dry heat, low temperature, impact, and vibration testing according to STANAG 4280 to meet NATO approval for gun carrying cases.

View More


Description:

Material analysis laboratory needed for the following testing on plastics:

Environmental Cycle test after 50 cycles according to PV 2005

Lightfastness according to PV 1303 after 3 period of exposure

Grey scale level, color and grain according to...

Requirements:

Environmental Cycle test after 50 cycles acc. to PV 2005
Lightfastness acc. to PV 1303 after 3 period of exposure
Grey scale level
Color and grain acc. to color combination
Color consistency acc. to VW 501 90
Resistance to open air weathering VW 501...

View More


Description:

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 61810 or 60255 standards

Requirements:

Performance testing, Environmental testing and EMC testing as per IEC 61810 or 60255 standards

View More


Description:

Large automotive company needs environmental simulation laboratory for DIN vehicle-level UV solar simulation testing according to DIN 75-220.Aging of automotive components in solar simulation units

View More


Description:

Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing, with test parameters according to:

- T...

Requirements:

USA laboratory, Pacific northwest preferred
UV resistance
The device shall comply with IEC 60068-2-5:2010, Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing, with test parameters according to:
- Test procedure...

View More


Description:

Materials laboratory needed for environmental simulation testing of a rubber door sweep product:

Ultraviolet & infrared light

High (150F) and low (-25F) temperatures

Chemicals such as aqueous salt solution, floor cleaners & disinfectants

Requirements:

Samples Required:
Each test will require one sample per test plus one control sample for comparison.
Ultraviolet & infrared light - 2 total
High (150F) and low (-25F) temperatures - 2 total
Chemicals such as aqueous salt solution, floor cleaners & d...

View More


Description:

Electrical wiring laboratory needed for the following testing:

EPR insulation under ASTM D1149 with an ozone concentration 250 ppm through 168 hrs.

CPE Jacket under ASTM D470 with an ozone concentration 150 ppm through 24 hrs.

Requirements:

EPR insulation under ASTM D1149 with an ozone concentration 250 ppm through 168 hrs.
CPE Jacket under ASTM D470 with an ozone concentration 150 ppm through 24 hrs.
Confidential

View More


Description:

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

View More


Description:

Aviation laboratory needed for performing the following tests:

ASTM-D-1149, test for ozone cracking of vulcanized rubber

FED-STD 191, weathering resistance of cloth

Method 5804, accelerated weathering method

Weatherometer testing with 7pphm SO...

Requirements:

Weatherometer testing with 7pphm SO2 and 10pphm O3.

View More


Description:

Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:

1. Leaching test - Based on EN12457 - 2 Part 2 and EN ? 12506

2. Sulfur test - Based on ISO 4689-3 : 2004

3. Corrosion test - Based on LPR metho...

Requirements:

IEC 62561-7 and NABL approved laboratory.

View More


Description:

Automotive textiles company needs materials laboratory needed for SAE accelerated weathering testing to SAE J2527 testing using Q-Sun Xenon Test Chamber Xe-3 weatherometer or similar machine (xenon accelerated weathering of fabric) for 500 hours and 1000...

Requirements:

SAE J2527 using Q-Sun Xenon Test Chamber Xe-3 weatherometer or similar machine

View More


Description:

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

Requirements:

ASTM C836

View More


Description:

Environmental simulation laboratory needed for accelerated weathering testing of a mini-installation of a playground made from glued playground tiles. Weathering simulation should include water submersion to simulate outdoor exposure to weather.

Requirements:

Need an oven and a freezer large enough to hold a platform "mini installation" of 4 of our 2-foot by 2-foot playground tiles as they are glued together during installation. Also would need a way to submerge the samples, or at least get them very wet (to ...

View More


Description:

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching test - Based on EN12457 - 2 Part 2 and EN - 12506
2. Sulfur test - Based on ISO 4689-3 : 2004
3. Determina...

Requirements:

IEC 62561

View More


Description:

URGENT. Automotive paint testing laboratory need for Amtec car wash testing per ISO 20566.

View More


Description:

LONG TERM. Textile laboratory needed for testing water resistance of soft-shell garments according to apparel industry standards.

Requirements:

Outdoor apparel testing standards.
Simulated rain.

View More


Description:

Environmental simulation laboratory needed for testing glass that has been treated with a liquid.

Requirements:

12 to 18 months time lapse
Exposure to sun, salt, and humidity

View More


Description:

Environmental Simulation Laboratory needed for paint plastic cans testing for 28 days at stacked conditions to simulate summer test simulation
at day time 45 to 48 degree c, night time 29 to 35 degree c

? What tests are we going to perform...

View More


Description:

Geology laboratory needed for construction materials performance testing of rock used for dwelling sidings if it is good for Alberta weather

Requirements:

- test for accommodation for Alberta weather

View More


Description:

Automotive laboratory: needed for Volkswagon weather testing of polyethylene PE foam per VW 50185It

View More


Description:

Sports surfacing company needs Construction materials laboratory for ISO plastics testing UV testing as per ISO test method ISO 4892-2:2660

Requirements:

Test conditions: Test Cycle: ISO 4892-2:2660 cycle 1 Irradiance (0.51 ± 0.02) W/(m2nm) @ 340nm 102 min light at (65 ± 3) ?C BST, (50 ± 10)% RH 18 min light and water spray Filter: Daylight Exposure period: 1000 hrs

View More


Description:

weathering test following TSM0501G with Suga machine model : WEL-SUN-HCH type sunshine Weather-O- meter for the following: 1 Discharge voltage ( V) Range 48 to 52 Mean 50+ 2% Discharge current ( A) Range 58 to 62 Mean 60+ 2% Cycle Continuous radiation Bl...

View More


Description:

Physical Laboratory needed exterior grade laminate testing for UV resistance

View More


Description:

Physical Laboratory needed to perform weathering testing on our plastic according with VW standard PV 3930. Exposure time should be 1500 h. We do not need evaluation after test. Second specimen should be tested according with Nissan standard (NES) M0135: ...

View More


Description:

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1. Temperature & latitude test as per DO 160 Section 4 Category -B3.

2. Temperature Variation test as p...

View More


Description:

Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 standard fo Performance Requirements for Paint Systems Resistant to Chemical Agents and Decontaminants, for...

View More


Description:

Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cables on tensile performance, abrasion resistance, crush, impact, bending, kink, temperature cycling, water p...

Requirements:


Testing fibreoptic cables on tensile performance, abrasion resistance, crush, impact, bending, kink, temperature cycling, water penetration, attenuation, PMD, chromatic dispersion, fire resistance, according to IEC Standard 60793-xx and 60794-xx. Follow...

View More


Description:

Laboratory needed for ASTM Testing of anti-graffiti product to:
ASTM 6578 « Graffiti Resistance »
ASTM 653 « Accelerated Weathering »
ASTM D6490 « Breathability »

Please include a quote and the amount and quantity of samples required to perform the...

Requirements:

ASTM 6578 « Graffiti Resistance »
ASTM 653 « Accelerated Weathering »
ASTM D6490 « Breathability »



View More


Description:

Large company needs materials laboratory needed for accelerated aging study on thermoset material with for yellowing index and light transmitting to identify the relationship between the hours accelerated test and the years of outdoor exposure.Please, se...

View More


Description:

LONG TERM TESTING Materials Laboratory needed for Polyamide Tube testing to prove compliance with DIN73378, DIN74324-1 and SAEJ844 Many different tests covering material mechanical properties, hydrostatic burst pressure, impact testing, moisture absorptio...

View More


Description:

Materials laboratory needed for ASTM Testing of novel paint composition of anti repellent activity.

Requirements:

ASTM std tests

View More


Description:

Large automotive supplier needs materials laboratory for physical testing on painted plastic such as the DuPont Impact test and Traverse Abrasion plus many more.

View More


Description:

ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 for the 120 Day Accelerated Water Treeing Test followed by test protocol to include Electrical Measurements...

View More


Description:

Accredited UK laboratory needed for construction building products testing of flexible sheets for waterproofing to BS EN 12691, Determination of resistance to impact
BS EN 12730. Determination of resistance to static loading and
EN 1847
for building...

Requirements:

BS EN 12691. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
BS EN 12730, Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. D...

View More


Description:

Flooring Company needs Performance Laboratory for water resistance testing of Cement self leveling products.Product is a topical sealant to apply to some of our cement based self leveling products.

Requirements:

We are looking at a water resistance test

View More


Description:

Europe Materials Laboratory needed for Paint film performance tests on mild steel panels
Sr No Test
1 Salt Spray Test (504 hours)
2 Humidity Resistance (504 hours)
3 Pencil hardness
4 Dry Adhesion
5 Elongation
6 Impact Resistance (direct)
7 Impact...

View More


Description:

Materials laboratory needed for paints testing for accelerated aging, hiding power, the spatter resistance, the scrub resistance, the washability, the sag resistance, the blocking resistance, the hiding change, the heat gain, the viscosity, the whiteness...

Requirements:

There are no specific requirements.

View More


Description:

Materials laboratory needed for paints testing for accelerated aging, hiding power, the spatter resistance, the scrub resistance, the washability, the sag resistance, the blocking resistance, the hiding change, the heat gain, the viscosity, the whiteness...

Requirements:

There are no specific requirements.

View More


Description:

Consumer Products laboratory needed for performance testing of horse boot inner liner material for heat and water evaporation in comparison to industry standard materials.

Requirements:

Would like to try and recreate as closely as possible field results (same conditions as would occur on a working horse.)

View More


Description:

Materials Laboratory needed for ASTM Testing: Weathering Testing to ASTM G-154 , QUV Exposure testing on 40 - 50 samples 4 X 4# each, 3,000 hours

Requirements:

pull samples each 500 hours of exposure and send them to our facility

View More


Description:

Aerospace laboratory needed for SAE Testing SAE AMS 1435C Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways
Sector:Aerospace
Topic:Aircraft deicing, corrosion

View More


Description:

Weathering laboratory needed for environmental simulation testing of bikes with salt spray.

Requirements:

Salt spray

View More


Description:

Nanotechnology laboratory needed for nanomaterials testing of clean coating for glass and ceramic surfaces by accredited tests: EN ISO 11998 and certifying other properties of the coating, such as adhesion to the substrate, UV weathering (ISO 11507), wate...

View More


Description:

Physical Weathering Laboratory needed for Awning testing for snow and wind load. Determine load carrying capacity

Requirements:

Determine load carrying capacity

View More


Description:

Materials Laboratory needed for ISO plastic piping testing to ISO 4437:2007 we would like to perform following test on our pipe manufactured with PE100 material, kindly send us testing charges. Sr. no. Characteristic Unit Requirement Test parameter Test ...

View More


Description:

Physical Laboratory needed for Accelerated Weathering Testing. Testing on our double sided printed tags, material type is dip coated nylon taffeta. These tags are sewn onto our tie-down straps that are used in a various weather conditions: snow/ice, heat...

View More


Description:

Plastic Film manufacturer needs USA weathering laboratory for Accelerated weathering testing
Tensile strength (Before and after weathering)

View More


Description:

Waterproofing company needs physical laboratory for weathering testing: insulation properties test for concrete in minus 30 degree

View More


Description:

Asia Laboratory needed for Desert Climate (Natural weathering test) follow standard ISO 877 method A,Plastics - Methods of exposure to solar radiation for 2 years and evaluate every 1 years

Requirements:

ISO 877

View More


Description:

USA Materials Laboratory needed for ASTM polycarbonate testing to ASTM G153 test cycle 1
environmental weathering testing:

15 flat samples (2x2 inch)
15 curved samples (2x2 inch)

All samples are directional

requesting 500hr and/or 1000hr

e...

Requirements:

ASTM G153 test cycle 1

View More


Description:

South Africa Physical Laboratory needed for accelerated weather testing on grp parts bonded with an adhesive. Please find the cycles below: Weathering in a climatic chamber with 50 cycles of the following steps: - 0h30 @ 20°C +/-5°, - 1h @ -20°C +/-2° - 1...

View More


Description:

Physical Laboratory needed for weathering testing of sheds: accelerated weathering test according to the Sub-Clause 9.3.2 of IEC 62217:2012 standard which refers to ISO 4892-2:2006 standard ->Xenon Arc method.
The test object is the shed and housing mate...

Requirements:

Sub-Clause 9.3.2 of IEC 62217:2012->ISO 4892-2:2006I wish my contact information and company to remain Confidential.

View More


Description:

ISO Materials Laboratory needed for ISO Testing to ISO 17398 Adhesion (18N per 25mm, class U), Accelerated weathering resistance 7.3.4 Table 6, Abrasion resistance 7.9, flame resistance 7.7.3, humidity resistance 7.2, Wipe resistance 7.16, surface print a...

Requirements:

ISO 17398 Adhesion (18N per 25mm, class U), Accelerated weathering resistance 7.3.4 Table 6, Abrasion resistance 7.9, flame resistance 7.7.3, humidity resistance 7.2, Wipe resistance 7.16, surface print adhesion 7.8, gloss, 5.1.5 class I, shrinkage 7.14 c...

View More


Description:

Weathering Laboratory needed for performance testing / weathering testing of exterior coating, based on Ordinary Portland Cement, polymers, fillers, and additives. We would like to know how it performs under outdoor exposure. Please let us know how you c...

View More


Description:

Independent, accredited Plastics Laboratory needed for plastics testing: failure analysis of sealant material for failure on site that might be structural silicone, weathering silicone or polyurethane. We are looking for the following:

Confirmation of...

View More


Description:

Physical Laboratory needed for ISO Testing: Accelerated Weathering including water spray to ISO 4892-2

Requirements:

ISO 4892-2

View More


Description:

Chennai Plastics Laboratory needed for PVC Testing: UV light exposure weathering testing for a PVC material

View More


Description:

West Coast USA Physical Weathering Laboratory needed for Accelerated Weather Testing Per FED-STD-191 Method 5804 Accelerated Weathering Procedure for Waterproof Weather-Resistant Cloth per MIL-PRF-20696.

Test procedure is performed in accordance with F...

View More


Description:

Materials Laboratory needed for water resistancy testing: vinyl coated cotton cloth type 2 class 1 per MIL-c-10799 table 4. The test result provided by the mill house is missing these necessary End item test. -Resistance to water absorption. Paragraph 3.5...

View More


Description:

India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength.

View More


Description:

India Physical Laboratory needed for weathering testing of outdoor aluminum furniture table

View More


Description:

Puerto Rico materials laboratory needed for weathering testing for installation of a presumed hydrocarbon treatment in several wood beams.

Requirements:

We would need a hydrocarbon weathering test to determine aging or equivalen.

View More


Description:

Minnesota materials and weathering laboratory needed for coating testing : transmission/reflectance of coating, durability and salt spray testing

View More


Description:

USA Physical, Weathering Laboratory needed for Lead testing EPA3051/3052 and modified Salt Spray B117 for 1% salt.

View More


Description:

Europe Physical Laboratory needed for nanocomposite testing, ASTM accelerated weathering testing of nanocomposite materials

Requirements:

ASTM, confidential

View More


Description:

ASTM Weathering Laboratory needed to test 15 samples for weathering as per ASTM G155.

Requirements:

ASTM

View More


Description:

Europe Analytical Chemistry Laboratory needed for testing crude oil for the following:
1. Weathering study
2. True Boiling Point (TBP)

Requirements:

None

View More


Description:

Minnesota ASTM Physical Laboratory needed for the following: Screen the air-dried bulk samples through a 6.3-mm (0.25-in.) screen in accordance with ASTM Test Method E 276. Crush any oversize material so that 100 % passes the screen.
For particles finer...

Requirements:

ASTM E276

View More


Description:

China NFC Laboratory needed for outdoor weathering test for Aerial Bundled Cables as per NFC 33-209

Requirements:

weathering test as per NFC 33-209

View More


Description:

ANSI Laboratory needed for testing in accordance to ANSI Z26.1 Automotive Glazing
Plastic Transparent Nylon
2 thicknesses 0.1" to 0.236"
Item 6 testing
Test 2 Light transmission
Test 16 weathering
Test 19 chemical
Test 29 chemical
Test 22 Flex
T...

Requirements:

FMVSS 205 (ANSI Z26.1) Confidential

View More


Description:

USA Weathering Laboratory required for weathering testing 24-36 samples (1" x 6" x 24" - or smaller if required by testing facility) of Alaska yellow cedar coated with a combination of three products (epoxy, water repellent preservative, and oil-based sta...

Requirements:

No testing standards apply, however, company and contact information must remain confidential.

View More


Description:

Textiles Laboratory required for testing nylon material for
VW50190 Colorimetric Evaluation
VW50185 Resistance to Weathering
VW50180 Emission Behavior
TL1010 Burning Behavior
TL226 paint coatings
PV1303 Light Exposure

Requirements:

VW50190 Colorimetric EvaluationVW50185 Resistance to WeatheringVW50180 Emission BehaviorTL1010 Burning BehaviorTL226 paint coatingsPV1303 Light Exposure

View More


Description:

India Weathering Laboratory needed for weathering testing or printed self adhesive vinyls pasted on polycarbonate sheets tested for outdoor weathering - to see at what point in time the fading starts

View More


Description:

China or Colombia GMP laboratory to test large plastic components for weathering and impact

Requirements:

GMP

View More


Description:

1) Vicat Softening Temperature (AUE-8" 03155)
2) weathering test, radiation of 2Gj/m2 indicating:
- difference of colour between exposed and non-exposed sample
- colour fastness, grey scale, between exposed and non-exposed sample
- visual judgement on...

Requirements:

PN-EN ISO 306:2006 (oil option) PN-EN 513:2002, method 1 PN-ISO 7724-2:2003 PN-ISO 7724-3:2003 PN-EN 20105-A02:1996 prEN 13245-1:2009 PN-EN ISO 8256:2006, method A, sample of type no. 5

View More


Description:

Physical Weathering Laboratory needed for testing treat Ipe (wood) decks and have them weathered, in a lab, for a year to judge results.

View More


Description:

Large Chemical Mfg needs Physical Weathering Laboratory for exterior weathering testing with exposure in multiple climates and evaluation of coated substrates.

Requirements:

General evaluation and qualitative analysis of weathering effects on test samples.Please keep contact info Confidential

View More


Description:

Weathering Laboratory needed for MIL, acelerated weather testing to MIL-W-6370 par. 4.6.6

View More


Description:

South Carolina Area Physical Laboratory needed for Accelerated weathering and colorfastness testing, measurement of textile (nylon) Particular emphasis on coloristics after UV exposure (degree of fade)

Requirements:

Not required.Like-to-like comparison only.

View More


Description:

Physical Laboratory needed for weathering testing, sun shine weather meter testing

View More


Description:

Israel physical weathering laboratory needed for optical testing of substrate that contains ~ 700 millimeter sized CPC optical elements. Whish to test actual performance under one sun conditions and compare to reverse ray analysis.

Requirements:

confidentiality required

View More


Description:

Europe Weathering Laboratory needed for GMW 3417 natural weathering exposure test

Requirements:

GMW 3417

View More


Description:

Europe GMW 3417 Physical Laboratory needed to test the interior car carpet for natural weathering exposure

Requirements:

GMW 3417

View More


Description:

Mexicao ISO Materials Laboratory needed for testing weathering and light stability, light fastness to textile mesh"

Requirements:

ISO

View More


Description:

NFC 33-209 UV Laboratory required for Xenon arc uv weathering for LV cable

Requirements:

NFC 33-209

View More


Description:

UAE ASTM Physical/Environmental/Microbiology Laboratory needed for testing
1. RESISTANCE TO WEATHERING: ASTM G26, EXNON ARCLAMP,
2. PRACTICE FOR OPERATING LIGHT EXPOSURE WITH AND WITHOUT WATER: ASTM G26 METHOD A, TYPE B, WEATHER-O-METER
3. DETERMINATIO...

Requirements:

ASTM

View More


Description:

USA ASTM Metallurgical or Materials Labortatory needed for Corrosion Testing (Salt Fog Exposure/Cyclic Weathering)of Metal Panels
Please provide a Quote:

Cold Rolled Steel and Al Panels Coated with Anti-Corrosive Material
# Panels: 10-20 Panel...

Requirements:

ASTM

View More


Description:

USA, Mexico Weathering Laboratory needed for NES 66862NDS00 WEATHERABILITY TESTING OF Plastics Materials

View More


Description:

UK materials laboratory needed for physical testing of self adhesive films against various criteria, peel strength, opacity, weathering, initial & ultimate adhesion,gloss levels, temperature resistance, salt spray,flexibility etc. Can you please respond ...

View More


Description:

UK Materials Laboratory needed for ASTM, FINAT testing of a range of self adhesive films for adhesion,opacity, weathering,gloss level,temp resistance,salt spray resistance,chemical resistance,abrasion,tear resistance,shrinkage

Requirements:

ASTM, FINAT

View More


Description:

Weathering Laboratory needed for NES M0135-2008 Sunshine (Carbon arc) 2000 hrs, Sunshine Weathering

Requirements:

NES M0135-2008 Sunshine (Carbon arc) 2000 hrs

View More


Description:

Environmental Weathering Laboratory needed for Accelerated Weathering test and UV resistant for PVC Films to be used for christmas trees sleeves.

View More


Description:

Canada ISO Weathering Laboratory needed or ASTM Artificial weathering testing for wood samples (Xenon lamp)

Requirements:

ASTM, ISO

View More


Description:

Texas environmental laboratory needed for ASTM, ISO, subsurface weathering Testing services needed to analyze environmental degradation (and leaching potential) due to subsurface weathering of an HDPE road base material.

Requirements:

ASTM, ISO

View More


Description:

Weathering laboratory needed for testing pigments for coatings light fastness & weather fastness . Please send your price for testing.

View More


Description:

India ASTM Materials Testing Laboratory needed for:
Plastics Discoloration Testing
Physical Properties Testing
Simulated Environmental Exposures Testing Studies
Heat Deflection Testing
Mechanical Properties Testing
Peel Strength Testing
Flexure Mod...

Requirements:

ASTM standard

View More


Description:

Australia Weathering Laboratory needed for weathering and dispersant testing

View More


Description:

USA Materials Testing Laboratory needed for ASTM Weathering Testing for Operating Xenon Arc light apparatus for exposure of non-metallic materials, in this case it would textiles (weathering).

Requirements:

ASTM

View More


Description:

WEATHERING LABORATORY NEEDED FOR ACCELERATED WEATHERING TESTING & SIMULATED ENVIRONMENTAL EXPOSURE TESTING STUDIES

View More


Description:

USA physical weathering laboratory needed for GR 1089 testing lightning effects on telecommunications equipment

Requirements:

GR 1089

View More


Description:

ISO, ASTM India lab needed for accelerated weathering test
UV for 600 hrs.

Requirements:

ISO,ASTM

View More


Description:

Experienced Cosmetics laboratory needed for testing on hair fibers including mechanical properties, optical properties, color, weathering, and any other testing available.

View More


Description:

Materials Laboratory needed for ASTM Asphalt accelerated weathering testing. ASTM D 4798 Weatherability of bituminous materials Cycle A and Cycle B

View More


Description:

Materials laboratory needed for ASTM testing of fiber reinforced polyester panel including Fire resistance test (ASTM E84); UV + humidity resistance (weathering accelerated test) ASTM D4329; Chemical resistance ASTM D543; Flexural strength ASTM D790; Tens...

View More