How can we help you?
Contract Laboratory has received the following coatings Laboratory Requests which need to be fulfilled! These coatings Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their coatings Laboratory and Scientific Research. If you need a coatings Laboratory, please Submit a coatings Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Analytical Chemistry Laboratory for reverse engineering and formulation of a tint to coat SPR rubber crumb that gets mixed with polyurethane and even... View More
Coatings company looking to rent USA Laboratory Space where their engineers can blend their coating product for it's sale in USA.
View More
Large Coating Company needs Laboratory for the following coatings testing: Fuel & Seawater Immersion, Seawater Immersion, and Cathodic Disbondment View More
Large Coatings Company needs Materials Laboratory for weather-o-meter testing (UV aging) View More
Architectural Coasted Glass Testing
Construction Laboratory needed for architectural coated glass radiation testing under high temperature and humidity test to a JIS standard View More
Waterproof Jacket Coating Testing
Contract Testing Laboratory needed for certification testing of coating for waterproofing jackets View More
Tape Roll Adhesiveness Testing
India Material Laboratory needed for adhesiveness testing of tape rolls for the following:
1. Stickiness
2. Tensile strength and elongation - we us... View More
Materials Laboratory needed for ASTM testing of paint of mold resistance according to ASTM D3273 Mold resistance test for paint
View More
Coating ASTM Accelerated Weathering
Materials Laboratory needed for ASTM accelerated weathering performance testing of exterior coatingas per ASTM test methods. View More
Asia Laboratory needed for OECD biodegradablity testing on dyestuff and chemical product using OECD Test Method Method OECD 302B or 301 A-F PRINCIPLE... View More
Adhesive manufacturer need Materials Laboratory for failure analysis on painters tape. Company's customers have been reporting adhesion problems, so ... View More
Consumer Products Laboratory needed for ASTM testing of 6 colors of artists oil paints tested to be in compliance with ASTM D4302 Standard Specificat... View More
Small Construction Co needs Construction Materials Lab for evaluation of driveway glue tile adhesive used with waterproofing that has been comedrummy ... View More
Wallpaper Producer needs Industrial Laboratory for fire testing according to the EUROCLASS system (Reaction to fire in accordance with EN 13501-1 - i... View More
Nanotechnology Laboratory needed for nanoparticle coating solutions testing based on metal dioxide Nano particles used for coating of SS steel.we have... View More
RFP - ASTM Concrete Curing Compound Testing
Manufacturer needs Construction Materials Laboratory for ASTM testing on curing compounds for concrete to ASTM C309 ( A standard test method for water... View More
Food Laboratory needed for testing of a vegan coating after spray coating 4 food compounds with the coating. View More
ASTM Encapsulation Resins and Conformal Coatings
Materials Laboratory needed for ASTM E595 testing for encapsulation resins and conformal coatings. Please provide one set price per product and anoth... View More
Aerospace Adhesive Lifetime Testing
Materials Laboratory needed for lifetime testing of a new adhesive coating we are planning on using on an aerospace and defense application. View More
In Vivo Acute Toxicity and Product Safety Study
FUNDING APPROVED Preclinical CRO needed for in vivo acute toxicity and product safety study of pharmaceutical drug coating using 5 different medical d... View More
ASTM Encapsulation Resin and Conformal Coatings Testing
Materials Laboratories needed to provide with some quotes for ASTM E595 testing on 1, 5, and 10 encapsulation resins and conformal coatings.
View More
ASTM Waterproof Coating Testing
Materials Laboratory needed for ASTM testing of coating material in accordance to ASTM C1305 Standard Test Method for Crack Bridging Ability of Liquid... View More
Dermatological Clinical Research Studies
Large Chemical Company needs Clinical Research Laboratory for the following dematological studies: Patch Testing and Repeat Insult Patch Testing RIPT.... View More
Materials Laboratory needed for ASTM Testing of coating to ASTM F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating... View More
Surface Antibacterial Resistance Testing
USA Microbiology Laboratory needed for Antibacterial Resistance Testing of door handle surface in compliance with the US requirements.
View More
Materials Laboratory needed for adhesives comparison study testing for peel adhesion, temperature range for double coated tape for corrugated applicat... View More
OECD TRANSPORT OF UN DANGEROUS GOODS
Materials Laboratory needed for OECD testing of Automotive Sealer Coating in compliance to Transport of UN Dangerous Goods including the following te... View More
ASTM polyurethane based membrane testing
Coatings Company needs Polymer Laboratory for ASTM testing on polyurethane based membrane to ASTM C836 Standard Specification for High Solids Content... View More
Materials Laboratory needed for epoxy phenolic coating testing according to EI 1541 (Standard for aviation fuel coating) View More
GMW Automotive Adhesive Testing
Automotive Laboratory needed for automotive adhesive testing to GMW14573 Label specification testing. Automotive adhesive label testing. View More
Materials Laboratory needed for ASTM testing of Coatings to ASTM E-1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Product... View More
Large Materials Laboratory needed for multiple tests on automotive coating including:
EU REACH
Phys. Chem properties
OECD Tests
Auto flammabili... View More
Tests according ISO 12944-1:2018-06 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective... View More
Materials Laboratory needed for FTIR microscopy analysis of coating defects, and determination of what the defect is. For example, if the defect is a... View More
FDA and USDA Food Contact Coatings Testing
FDA GMP Food Laboratory needed for testing of food contact coatings testing to obtain FDA or USDA R-1 approval for a couple coatings. This is for inc... View More
Adhesive Performance on Coated PSA Laminate
Independent Adhesives Test Laboratory needed for confirmation of results from the manufacturing lab for the adhesive performance of a production coate... View More
Heat Seal Lacquer Formulation Development
Industrial Analytical Chemistry Laboratory needed for formulation of a heat seal lacquer that would be used industrial production View More
ASTM Elastomeric Coating Properties
LONG-TERM USA or Korea Polymer Materials Laboratory needed for ASTM Elastomeric Coating properties as per ASTM D6083 View More
ASTM Roofing Elastomeric Coating
Elastomeric Coating to ASTM D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing View More
ASTM Testing of Hardwood Cleaner and Restorer.
Third-Party Materials Laboratory needed for ASTM testing of hardwood floor cleaner (UL 2759) and restorer (UL 2777). to the following ASTM standards:... View More
Paint Stripping Product Spontaneous Conbustion
Materials Laboratory needed for ASTM spontaneous combustion testing of a paint stripping product applied to cloth according to ASTM D6801-07, Standard... View More
ASTM Thermal Insulation Panel Testing
Materials Laboratory needed for ASTM Testing of Decorative Coating Thermal Insulation Panel to ASTM E2430 .
View More
Coatings Anti-Carbonation Certification
Third-Party Laboratory needed for anti-carbonation certification testing of exterior paint coating View More
Materials Laboratory needed for normal and hemispherical emissivity testing as per ASTM E408 Standard Test Methods for Total Normal Emittance of Surfa... View More
Polymer Coating Films ASTM Testing
Polymer Company needs Materials Laboratory for ASTM testing of polymer coating films to a) solar Reflectance as per ASTM E 903 and b) as per ASTM E 1... View More
Glass DIN Resistance to Attack
Third-Party USA Laboratory needed for DIN testing of glass type S1, S2, S3 as per DIN 12116 Resistance to attack by a boiling aqueous solution of hydr... View More
Coating Total Solar Reflectance
Large Paint Company needs experience laboratory for total solar reflectance (TSR) testing of coatings applied to Laboratory Applied Testing Panels.... View More
Cosmetics Coatings Optical Contrast
Cosmetics Company needs Laboratory to measure the reflectance of multiple coatings consisting of optically variable pigment at multiple angles to quan... View More
Microbiology Laboratory needed for n neutralization confirmation and sanitizer study on antimicrobial coating with 2 strains of the following organism... View More
Bonding validation by ageing test according to appendix 3 of the DVS1618 is needed for glazing that is produced for the train industry. View More
Materials Laboratory needed for failure analysis of construction materials adhesive that moisture has infiltrated compared to the same adhesive in id... View More
Materials Laboratory needed for flash point testing for coating product by closed-cup test method. View More
ASTM Metal Coating Adhesion to Metal
Materials Laboratory needed for ASTM adhesion testing for metal coatings on a metal substrate to ASTM D4541, Standard Test Method for Pull-Off Strengt... View More
Aerosol Cans Packaging Testing
Manufacturer needs Packaging Laboratory for burst and leak testing of aerosol cans. View More
Materials Laboratory needed for ASTM Testing of several waxes to the following ASTM Standards: Melting Point, Ash Content, Congealing point (ASTM D93... View More
Polymer Laboratory needed for ASTM testing of a polyimide film with a proprietary coating for printed circuit boards including reflectivity with the i... View More
Materials Laboratory needed for ASTM Refractive Index Testing performed on a a hydantoin glycol used as a resin cross linker used in coatings and poly... View More
ASTM Coating Testing - ASTM D4086, ASTM E1477, ASTM E1347.
Materials Laboratory needed for fiberglass pool.coating testing to 3 ASTM Standards ( ASTM D4086, ASTM E1477, ASTM E1347) to determine a dry lightness... View More
Large corporation needs NABL Microbiology Laboratory for anti viral efficacy of paint against certain viruses. View More
Third-Party Materials Laboratory needed to test adhesion of tape to Pressure Sensitive Tape Council PSTC Standards: 180 peel to steel and 180 peel to... View More
Third-Party Laboratory needed for ASTM coatings testing to ASTM G 122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents. View More
Large corporation needs Materials Laboratory for ASTM Solar Reflectance Testing of water proofing paint:
1) Solar reflectance index (SRI value) in ac... View More
Fire Retardant Coatings Testing
Accredited laboratory needed that can provide 3rd party fire accreditation testing for fire retardant coatings. View More
Automotive powder coating Testing
Automotive Industrial Laboratory needed for physical testing of powder coated metal according Ford WSS-M2P190-A
Interior painted part of handbrake in... View More
URGENT Company needs third-party Analytical Chemistry Laboratory for recertification testing bonding primer in which the shelf is set to expire today.... View More
LONG-TERM TESTING Materials Laboratory needed to measure the haze of a sapphire coating on glass View More
Chemical Manufacturer needs Laboratory for GLP testing to support REACH registration of a non hazardous, insoluble, high melting point solid including... View More
Large Corporation needs Consumer Research Laboratory for consumer panel flavor study on beverage can coatings to determine if the specific type of can... View More
Material Laboratories needed for ISO leaching rate testing of coatings to ISO method 10890:2010 of marine anti-fouling paint. View More
USA Large Beverage Company needs Materials Laboratory for adhesive coat weight testing. Similar to ASTM F 2217 or FINAT Test Method 12 View More
Materials Laboratory needed for comparison testing of a new coating for light transmissivity test done on two pieces of glass coated with the old coat... View More
University Researcher needs mechanical laboratory for temperature measurement for 2 engine pistons with and without coating. View More
URGENT / LONG-TERM TESTING Materials Laboratory needed to measure the AR coating on windows and lenses at 1590 and 1877 nm in the 0.05 - 0.2% range b... View More
Materials laboratory needed for measurements on an anti-reflection coating on both external surfaces of a cemented doublet measured. The diameter of t... View More
Materials laboratory needed for ANSI and ASTM testing of liquid membranes to ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set ... View More
Materials laboratory needed for weathering and performance testing of coatings to determine which will preserve and protect the outdoor signs from gra... View More
ISO/IEC 17025 Automotive laboratory needed for resin testing to Mercedes Standard DBL 7384:2015: Supply Specification Coating of plastic parts in vehi... View More
Materials laboratory needed for ASTM bench mark testing of acrylic caulks. Tests needed include
Application Rate v2 ASTM C1183
Boeing Flow ASTM D22... View More
Microbiology laboratory needed for disinfectant efficacy test ingversus Hepatitis B and a test versus Avian influenza View More
Materials laboratory needed for flammability of industrial, coated textiles to two BS Specifications including: BS 7837:1996,Specification for flamma... View More
Polymer laboratory needed for Coefficient of Friction (COF) testing on plastic film samples to ASTM D1894, Standard Test Method for Static and Kinetic... View More
Materials laboratory needed for reflectivity measurements for Anti-Reflection AR coated glass plates. The glass plates are 4.75 x 3.75 x 0.063 in size... View More
Materials laboratory needed for powder coatings testing applied to metal panels. The topography and texture of powder coating surfaces to image and qu... View More
Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durab... View More
Materials laboratory needed for testing waterproofing membrane for
1 - hydrostatic head resistance (an independent test) required values: 70m (231ft)... View More
Materials laboratory needed for ASTM testing of newmarine coating to ASTM D4939 Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear F... View More
Materials microbiology laboratory needed for preservative effectiveness testing of a coating. View More
URGENT Large corporation needs automotive laboratory for UN testing of coating tint used on windscreen/windshield to ISO 3537 Headform testing for aut... View More
LONG-TERM TESTING Physical laboratory needed for ASTM flammability testing of paint to ASTM D822 Open-Flame Carbon-Arc Exposures of Paint and Related ... View More
Polymer laboratory needed for materials testing to Atex Zone 20, 21, and 22 directives for use of a polyurethane coating for use in multiple industrie... View More
Analytical chemistry laboratory needed for ASTM testing of silicon based chemicals to ASTM E222-10: Standard Test Methods for Hydroxyl Groups Using Ac... View More
Laboratory needed for research experiment for the evaluation of an agrocrop-based absorbent's effect on the flash point of oils. View More
Polymer laboratory needed to identify composition of a gelatinous elastomer product and a coating product used for breast prostheses and other medical... View More
Large corporation needs polymer laboratory needed for molecular weight distribution of natural rubber materials by light scattering detector and visco... View More
Large company needs materials laboratory for identification testing of powder coating used in lining for valves. We believe that it is polypropylene b... View More
Metals coating company needs NABL laboratory for IEC resistivity ,corrosion & sulphur testing to IEC 62561. View More
URGENT Large paint company needs toxicology laboratory for OECD Study including method validation and development to OECD 483 assay (Mammalian Spermat... View More
Polymer company needs materials laboratory for ASTM Testing of sodium chloride ice-melt / deicing properties View More
Polymer laboratory needed for monomer coating testing after curing process to determine monomers left on garment after curing by LED UV printers and ... View More
Environmental analytical chemistry laboratory needed for ISO & ASTM VOC emissions testing of window coating product to ASTM D5116 and ISO 16000-6 stan... View More
LONG TERM TESTING. Materials laboratory needed for thermal imaging of coating for reflectivity tests to extract emissivity number using a diffuse gold... View More
Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements View More
Metallurgical laboratory needed for micro structure study of differing layers of zinc on zinc-coated reinforced bars (re bars). View More
Medical Device (Optics) laboratory needed for analytical chemistry testing of potential contaminants in a product coating liquid via NMR and FTIR. GC... View More
Materials (textiles) laboratory needed for protective clothing testing to check the cut resistance of protective textiles to ASTM 2992 or F1790 using ... View More
Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid... View More
Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Perme... View More
Materials Laboratory needed for AASHTO testing of Architectural coating Material to
Chloride penetration test (AASHTO T259, T260)
Rapid chloride ... View More
Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7
2. Liquid water permeability: Test method EN-1062-7
3. Acid R... View More
Environmental Simulation Laboratory needed for paint plastic cans testing for 28 days at stacked conditions to simulate summer test simulation
at da... View More
Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, ... View More
Coatings company needs materials laboratory for DIN rubber coatings testing to DIN 53 504 Tensile strength test, DIN 53 507 Tearing resistant tes... View More
Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ... View More
FDA 175.300 and ISO 17025 accredited laboratory needed to test polymeric coating samples for repeat use with food contact, in order to use it to line ... View More
Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint... View More
Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials View More
Analytical Chemistry Laboratory needed for polyurea powder testing for residual formaldehyde:
View More
Medical Device Manufacturer needs laboratory for cleanliness testing of medical electrodes. View More
Environmental laboratory needed for OECD Testing: Biodegradability testing of natural wax particles. View More
Laboratory needed for Fire rating testing to NFPA 701, NFPA 705, German fire code, Australian fire code, and UK fire code.
Material is a nylon mesh m... View More
Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 sta... View More
Laboratory needed for DOT Testing to ISO Standards: (i) Viscosity test. The flow time in seconds is determined at 23 °C (73.4 °F) using the ISO standa... View More
Materials laboratory needed for ASTM plastic film testing of Natural fibers enriched plastic films for packaging application View More
Materials Laboratory needed for Material characterization of metal with Polymer thinfilm
- Mechanical properties characterization of flat thin steel ... View More
Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on va... View More
Materials laboratory needed for analysis of particulate formation in natural oil wood finishes. We are having some particulates forming that we need t... View More
Environmental Microbiology Laboratory needed for algae MIC testing on blend of two biocidal compounds (both are fairly water insoluble powders). The ... View More
Materials laboratory needed for ASTM Testing of novel paint composition of anti repellent activity. View More
Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the H... View More
Large automotive supplier needs materials laboratory for physical testing on painted plastic such as the DuPont Impact test and Traverse Abrasion plu... View More
Microbiology laboratory needed for anti-algae testing for Foul Release system View More
Materials Laboratory needed for engineering evaluation of a wall coating View More
Materials laboratory needed for ASTM proficiency testing for Linear Thermal Shrinkage of Plastics as per ASTM D 1204, Standard Test Method for Linear ... View More
Materials Laboratory needed to measure the optical transmittance of a ceramic thin film in the range 200 - 800nm.
View More
Metallurgical laboratory needed for Caustic soda testing on metals coatings.
View More
LONG-TERM TESTING Materials laboratory needed for shear strength testing of an adhesive as per Federal Specification MMM-A-181D.Shear strength by ten... View More
MATERIALS LABORATORY NEEDED FOR EPOXY TESTING TO SPECIFICATION REQUIRMENTS View More
Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break ... View More
Flooring Company needs Performance Laboratory for water resistance testing of Cement self leveling products.Product is a topical sealant to apply to s... View More
Europe Materials Laboratory needed for Paint film performance tests on mild steel panels
Sr No Test
1 Salt Spray Test (504 hours)
2 Humidity Resist... View More
Polymer laboratory needed for Identification of toluene content in solution polymer in ppm. Polymer is acrylic copolymer in n-Butyl Acetate View More
Materials laboratory needed for AFNOR AC T51- 808:2012: Assessment of Oxobiodegradability of Polyolefinic Materials in the form of Films (Abiotic) onl... View More
FDA Packaging Laboratory needed for FDA Packaging testing of coated paperboard according to the Microwave Heat Susceptor Packaging section of the 200... View More
Materials Laboratory needed for coatings research and devlopment to dissolve a metalorganic liquid into anhydrous toluene and seal them into a provide... View More
Materials laboratory needed to measure the solar reflectance index (SRI) test on a water based thermal coating . Please provide location of testing, ... View More
OECD GLP Environmental Toxicology Laboratory needed for Toxicology Testing Acute Oral Toxicity, AMES Test, Skin Corrosion, Skin Sensitization, In Vitr... View More
LEGAL Materials laboratory needed for measuring surface of a flexible thin film material to characterize a few topographical features such as surface ... View More
Microbiology Laboratory needed for anti-fungal and anti-bacterial testing of High pressure laminates samples View More
Materials laboratory needed for Optical Testing of epoxy samples for fluorescence, transmission, and reflectance View More
Contract Laboratory needed for film testing of UV400 Optical Film for UV protection and light transmission reflective, absorbtion and U Value View More
Certification Laboratory needed for Fire Retardency Testing of fabric to British Std 7837:1996 and British Std 5438:1989 ( 15 secs ). Please advise w... View More
Mechanical Laboratory needed for ASME Testing to ASME PCC-2, Repair of Pressure Equipment and Piping View More
Materials laboratory needed for PSTC Certification Testing of Pressure Sensitive Adhesive Tape Testing - Peel Adhesion, Tack, Static Shear View More
Materials Laboratory needed for Atomic Absorption analysis for quantification of Ag+ ions released into an aqueous environment. Please provide the cos... View More
Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone in accordance to ANSI 118.4 ... View More
Analytical chemistry laboratory needed for Triethanolamine Determination and quantification by GC and HPLC View More
Materials laboratory needed for testing to test the effects of an additive to basic hot melt formulations View More
Polymer Materials laboratory needed to conduct isothermal viscosity testing of sealants and estimate working life at various temperatures. I know thi... View More
LONG-TERM TESTING Asia Cosmetics Microbiology Laboratory needed for providing an annual quote for microbiological analysis in water and cosmetic gra... View More
URGENT Materials laboratory needed for testing to ASTM F2466-10, Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transpor... View More
Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone.
View More
MIDDLE EAST LABORATORY NEEDED FOR PAINT TESTING View More
Materials laboratory needed for #ASTM Testing to ASTM D3539 and ASTM D1331 for 31 liquid coating systems. View More
Materials laboratory needed for physical testing of machine part that has Sulphuric Anodization on Aluminium that require following testing.
a. ... View More
Materials laboratory needed for ASTM Testing of chemical composition of galvalume coating. and the methodology. View More
Certified Materials Laboratory needed for coating testing of Three (3) mixed adhesive coating samples tested for the following:
1. Volatile Or... View More
Materials Laboratory needed for Formulation and testing of flame retardant epoxy and unsaturated polyester compositions using customer supplied additi... View More
Physical Laboratory needed for salt spray testing on powder coating surface of( MS sheet ) View More
Analytical chemistry laboratory needed to strip xylene and mineral spirits from functional fluoropolymer resins for coatings, then process the resulti... View More
North America Materials Laboratory needed for Migration test of Bisphenol A BPA and other possible constituents under 21 CFR 175.300 (d) table 1 View More
Materials laboratory needed that is capable of running Alberta Transportation Specification B388 tests for type 3 concrete sealers View More
Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination B... View More
India materials laboratory needed for coatings testing: 1. Polyester Fabric PU Coating Test.
2. Polyester Fabric PVC Coating Test. View More
FDA polymer materials laboratory needed for FDA compliance testing for resinous and polymeric coatings FDA Title 21 Section 175.300. Under (a) - (2) ... View More
Materials laboratory needed for breakdown voltage bdv testing of coatings View More
Physical Laboratory needed for coatings testing of Bituminous waterproofing membrane for concrete bridge decks.
Number of sample: 1 type
We need la... View More
East Coast USA test lab neede for HPLC confirmatory testing to confirm that direct thermal paper suppliers who claim to use phenol-free color develope... View More
Europe materials laboratory needed for coating testing, Anti-corrosion testing of pipeline coatings anticorrosion test View More
Europe or Middle East Laboratory needed for materials testing : Coating testing to EN10290 for Qualification of polymer pipe coatings View More
Ontario Canada A2LA or ILAC Materials Laboratory needed for ASTM Testing: Material testing of automotive fasteners. Hardness testing rockwell c and o... View More
Colorant Manufacturer for coatings industry is interested in having coating approved for FDA food contact requirements and requires toxicological labo... View More
Canada Materials Laboratory needed for Materials Testing: Coating testing of 2 different coatings at 3 different moments in time with either GPC/SEC/G... View More
Mechanical Laboratory needed for metallic coating testing: ductility measurement on metallic coatings View More
California analytical chemistry laboratory needed for nitrogen testing of gaseous nitrogen analyzed to the requirements of MIL-PRF-27401 Grade B, Grea... View More
USA ISO Materials Laboratory needed for ISO Testing: Light Fastness to ISO 2135, Anodizing of aluminium and its alloys -- Accelerated test of light fa... View More
India Electrical Laboratory needed for Electrical Resistance Testing in accordance with MIL-DTL-5541 Cl-3, Military Specification, Chemical Conversion... View More
Architectural Coating Manufacturer needs Materials Laboratory for Quality Control Evaluation. Need to come to plant and give us a complete feedback o... View More
Coating and Paint Mfg needs materials certification laboratory for test certifications for our thermal insulation coatings, which we are manufacturin... View More
Physical Laboratory needed for Microscopy/Image Analysis-Preliminary work established that a ZnSe ATR crystal can "see" through all three coatings we ... View More
Analytical Chemistry Laboratory needed for testing Polymer coatings for acrylic oligomer separation and identification. View More
USA Materials Laboratory needed for Automated washer cycle testing by conducting cycle testing of components (qty TBD) with various coatings to determ... View More
India ASTM Materials Laboratory needed to test our specialty coatings/paint for fire retardant characteristics based on ASTM D 1360 or some other equi... View More
India ASTM Materials Laboratory needed for fire retardant test for specialty coatings. View More
USA Optical Laboratory needed for Fluorescent Imaging testing of thin coatings. Thickness measurements would be desired. View More
Eastern USA Consumer Products Safety Laboratory needed for Lead testing (Pb)in Paint and Other
Similar Surface Coatings View More
India Mechanical Laboratory needed to perform thermal shock experiment on plasma sprayed Zirconia- ceria oxide powder coatings on SUS 304 and Mild Ste... View More
USA Analytical Chemistry Laboratory needed for analysis of Calcium Carbonate Concentrate for use in plastics extrusion. Would like to know percentage... View More
Textiles Laboratory required for testing nylon material for
VW50190 Colorimetric Evaluation
VW50185 Resistance to Weathering
VW50180 Emission Behav... View More
Materials Laboratory needed for testing dozen different coatings we apply to medical devices. What we want tested is having the parts that are coated ... View More
Middle East Metallurgical Laboratory needed for Metallurgy and Coatings Testing View More
USA Analytical Chemistry Laboratory needed for analysis of Copper content in 11 solid (powder) thermoset powder coatings consisting of polyester resin... View More
Coatings Manufacturer needs Texas Laboratory for flammability testing to determine fire rating on an elastomer,& its thermal properties View More
Weathering laboratory needed for testing pigments for coatings light fastness & weather fastness . Please send your price for testing. View More
USA Materials Laboratory needed for Absorption and emittance testing of coatings View More
Product Safety Laboratory needed for testing inks and coatings of our greeting cards to see if they are in compliance with state and federal regulatio... View More
Eastern USA Materials Laboratory needed for rheology testing for viscosity as a function of shear rate, at temperatures of 40, 80 and 120 F, of about ... View More
USA Analytical Chemistry lab needed to analyze several rounds of liquid samples (surface coatings, epoxies, etc.) for our company- we will need to se... View More
US Metallurgial Lab needed for ASTM E430 Gloss measurement of Metallic coatings on steel substrate: chromium, electroless nickel, electroless nickel w... View More
SE USA GMP, GLP Microbiology Lab needed for AST microbial analysis of process water, coatings, effluent, raw material storage tanks, head box, broke c... View More
Optical Lab needed to determine the UV transmission of various coatings applied to a glass substrate. View More
Microbiology laboratory needed for antibacterial coatings testing View More
Materials Testing Lab needed for development and testing work for UV Curable Coatings and Adhesives View More
Materials laboratories needed for ASTM testing for composite coatings (ceramic, polymer, composite). In the next few months we will have about 60 samp... View More
Microbiology laboratory needed for antibacterial, anti-fungal and anti-algal testing of coatings. View More
Analytical Chemistry Laboratory needed for volatile analysis released during curing of coatings. The test may require curing a resin in a convection o... View More
Materials laboratory needed for Reflectance Testing of cured coatings of glossy black shall be tested for reflectance per the following requirements: ... View More
Physical laboratory needed for
surface tension testing of a dispersant used in paint and coatings. It is a 40% polymer solids material in water. View More
Analytical chemistry laboratory needed for synthesis and ASTM physical testing diols, diacids and diamines tested in high solids coatings, powder coa... View More
Materials laboratory needed for reflectance testing of various surface finishes and surface coatings. View More
GLP, ASTM physical laboratory needed for ASTM 6442 testing for Copper, zinc release from from antifouling coatings View More
-ASTM F1148 PERFORMANCE TESTING FOR TOYS:
-LABELING AND INSTRUCTIONAL REVIEW
-BEARING ATTACHMENT
-Hazardous Products (Toys)
-Mechanical Hazards ... View More
Popular Industries
