>

Need Aerospace Testing or Scientific Research?

Save time and money searching by submitting a Lab Request.

Submit Lab Request


Want access to our Aerospace lab requests?

Create an Account

Most Recent Aerospace Laboratory Requests

Contract Laboratory has received the following Aerospace Laboratory Requests which need to be fulfilled! These Aerospace Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Aerospace Laboratory and Scientific Research. If you need a Aerospace Laboratory, please Submit a Aerospace Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

Airbus Leakage Current Testing

Description:

Electrical Laboratory that specializes in Airbus Testing needed for Leakage Current Testing as per X2520RP0504375 Issue 1 for Airbus.

Requirements:

Leakage Current Testing as per X2520RP0504375 Issue 1 for Airbus.

Closed


Title:

ASTM Metal Peel Test

Description:

Aerospace Company needs Industrial Laboratory for ASTM testing: metal to metal climbing drum peel test to ASTM D1781 Standard Test Method for Climbing Drum Peel for Adhesives

View More


Title:

DER/FAA Aerospace Flame Test

Description:

Large corporation needs USA Industrial Laboratory with a DER/FAA certified Flame Chamber for Vertical Flame Test per 14 CFR ยง 25.853(a), Appendix F, part I (a)(1)(ii)

Requirements:

24 hour sample conditioning

View More


Title:

Explosive Residues

Description:

Aerospace company needs laboratory for testing for presence of explosive residue on a small plastic fragment 7 X 1

View More


Description:

LONG-TERM TESTING Aerospace Laboratory needed for ASTM Jet fuel testing (Jet-A) for its lower heating value (net heat of combustion) using experimental methods. There would be roughly 15-20 samples and if possible, someone located close to southern calif...

Requirements:

ASTM standards used, bomb calorimeters acceptable.

Closed


Description:

Aerospace Laboratory needed for compliance testing of aviation grade wipes under the AMS3819C standard, Cloths, Cleaning, For Aircraft Primary and Secondary Structural Surfaces

Closed


Description:

Aerospace Laboratory needed for Ph.D research study on Aerospace Gas Turbine Blades .

Requirements:

Ph.D Protocol and proposal will be attached in subsequent correspondence.

Closed


Description:

LONG-TERM TESTING Aerospace company needs materials laboratory for testing new aircraft part including mechanical property testing for composites and plastics.Our immediate needs are tests for Flexural and Bearing strength of Lamitex Fr-4 Glass/Epoxy mate...

Closed


Description:

Automotive laboratory needed for SAE J2297 or SAEJ2911 specification testing Fluorescent refrigerant leak detection for dyes.

Closed


Description:

Aerospace laboratory needed for one time first article testing on 3 edge lit panels that conform to SAE-AS-7788, Class 1W, Type VII. Testing of contrast, brightness and color of light as indicated in Table I of SAE-AS-7788. Test parameter will be provide...

Requirements:

SAE-AS-7788

Closed


Description:

Materials laboratory needed for testing of aerospace cleaner to AMS 3167, Solvents, Cleaning for Cleaning Prior to Application of Primer and Top Coat Materials
cleaning solvent.

Closed


Description:

Aerospace laboratory needed for FAA fire testing of several products used in an aircraft engine compartment including:
- 1 type of firewall (fireproof test) with temperature gradient measurement on unexposed side
- 2 types of composite stacking (fire re...

Requirements:

Testing needs to be conducted as per FAA AC 20-135 to fire resistant and fireproof standards.
The oil cooler will need an oil flow of 75-90 lbs/h for at least the first 5 minutes of the test.
The oil cooler and composite samples will need to be subjecte...

Closed


Description:

Aerospace Laboratory needed for ASMT material testing for atomic oxygen to ASTM E2089 Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications

Requirements:

In the USA

Closed


Description:

Materials laboratory needed for testing to support expiration date extension for adhesive tapes used in aerospace industry

Requirements:

Please provide pricing in response

Closed


Description:

Airline needs aviation laboratory for MIL-STD testing of aviation oxygen to MIL-PRF-27210 Oxygen Aviator's Breathing Liquid Gas.

Closed


Description:

Oil and petroleum / microbiology laboratory needed for jet fuel (Jet A1) testing for microbial growth and presence of fungi.

Closed


Description:

Large corporation needs analytical chemistry laboratory needed for water testing to determine the National Aerospace Standard (NAS) value of their demineralized water.

Closed


Description:

Mechanical laboratory needed for testing for the defined residual soiling values (Millipore values) on the surface of of high pressure pipes of diesel engine.

Closed


Description:

Acoustics company needs laboratory for testing to ECSS- Q-ST-70-02, Spacecraft Product Assurance (thermal vacuum outgassing test for the screening of space materials) to determine RML and CVCM rates.

Requirements:

need to be able to measure RML<1.0% and CVCM<0.1%
The laboratory nedd to be in north america

Closed


Description:

Polymer laboratory needed for nondestructive NDT Testing: heat resistance testing of an acrylic lens according to IWA MIL-PRF-5425. Also, need physical properties such as elongation, tensile strength testing of O-rings made out of 51+/-5 durometer EP rubb...

Requirements:

WILL SEND YOU SOME SAMPLES OF BOTH WITH COPIES OF THE DRAWINGS AND PROVIDED MATERIAL CERTS AND HAVE YOUR COMPANY VERIFY AND CERTIFY THE CORRECT MATERIAL USED.

Closed


Description:

Aerospace company needs materials laboratory needed for polymer testing for the dielectric strength in cured poly-sulfide rubber.

Closed


Description:

Aerospace laboratory needed for aviation (textiles) carpet testing to BSS 7313 Boeing Edge Binding Strength.

Requirements:

BSS7313 Edge Binding Strength

Closed


Description:

LONG-TERM TESTING Manufacturer needs Aerospace laboratory for FAA Testing of air field lighting transformers.

Requirements:

As per FAA specification

Closed


Description:

Materials Laboratory needed for Corrosion testing of molybdenum disulfide according to AMS-M-7866A. Tests required are:

1.Corrosion resistance in accordance with MIL-STD-791
2.Steel and copper corrosion. Performed on steel panels conforming to MIL-S-7...

Closed


Description:

URGENT. ASTM aviation laboratory needed for cleanliness testing via ASTM D4898 using a 0.8 micron filter meeting MIL-PRF-17331K specifications.

Requirements:

Pacific Northwest USA preferred
2190 TL lube oil
MIL-PRF-17331K

Closed


Description:

Aeronautical laboratory needed for Mil-Spec 25567E testing for liquid leak detection with oxygen and corrosiveness
Product already has 25567C approval

Closed


Description:

Aerospace laboratory needed for ASTM testing of material for use in outer space to ASTM standards.

Requirements:

ASTM standards

Closed


Description:

LONG TERM TESTING: Aerospace laboratory needed for BSS combustibility testing to BSS 7230 / BAC 5705 standards.

Closed


Description:

Large manufacturer of electro-mechanical products for the aerospace industry needs test facility for various types of compliance testing per DO160G and BS.3G.100,Part 2.

Requirements:

few tests as per DO160G and BS.3G.100,Part 2,
-Fungus
-FLUIDS SUSCEPTIBILITY
-ICING
-Salt spray
-Lightning
-explosion proof
-fire resistant

Closed


Description:

Large aerospace company needs laboratory for SAE fuel system testing to 3 SAE Standards: SAE J2260, Non-metallic Fuel System Tubing with One or More Layers, SAE J2044 Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems and SAE...

Requirements:

Parts to be tested to SAE J2260, J2044 and J2045 specification

Closed


Description:

Aerospace laboratory needed for contamination control product testing to approved by and other aerospace industry specified testing procedures AMS 3819 C Cloths, Cleaning, For Aircraft Primary and Secondary Structural Surfaces

Requirements:

Need to have a meeting before sending out the samples

Closed


Description:

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1. Temperature & latitude test as per DO 160 Section 4 Category -B3.

2. Temperature Variation test as p...

Closed


Description:

Materials Laboratory needed for FAA aircraft carpet testing: Fire retardant testing to FAR 25.853, Flammability Requirements for Aircraft Seat Cushions

Requirements:

FAR 25.853

Closed


Description:

Large corporation needs electrical laboratory for Ingress Protection Testing of environmentally sealed toggle switch is capable of complying with Ingress Protection 69K standards

Requirements:

We just need to know if our switch meets IP69K

Closed


Description:

Electrical Laboratory needed for EMC Testing to DO 160 Environmental Conditions and Test Procedures for Airborne Equipment for aviation products.

Closed


Description:

Aerospace Materials Laboratory Measurement of Attrition Index of Limestone to ASTM D5757-00, Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

Requirements:

preferably follows

Closed


Description:

Physical Laboratory needed for flammability pre-testing of carbon fibre samples to CS 25.853 Flammability Requirements for Aircraft Seat Cushions Appendix F, Part I, (a)(1)(ii) (i.e. 12sec vertical burn with 305mm x 70mm samples). The objective is to try...

Requirements:

Unofficial test, so no formal test report required. Also, maybe just one sample of each material may be submitted.

Closed


Description:

Oil laboratory needed for petroleum and oil testing. Checking mixed xylene and n-Heptane for sulphur content and tetra ethyl lead content

Requirements:

laboratory testing for petrolium products and oils

Closed


Description:

Aerospace company needs materials laboratory for investigation study of delamination problem with decor laminating application.by coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. We often see delamination...

Requirements:

We would like to know if you have coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. Any other suggestions will be appreciated!

Closed


Description:

Aerospace company needs Metrology Laboratory for ANSI calibration & testing

Closed


Description:

Aerospace laboratory needed for Vicat softening testing for ABS according to spec sheet.

Requirements:

I will attach the spec sheet to an email once you respond.

Closed


Description:

Aerospace laboratory needed for SAE Testing SAE AMS 1435C Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways
Sector:Aerospace
Topic:Aircraft deicing, corrosion

Closed


Description:

Aerospace laboratory needed for SAE Testing SAE AMS 1435C Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways
Sector:Aerospace
Topic:Aircraft deicing, corrosion

Closed


Description:

URGENT: Aerospace company needs Laboratory for ISO Testing: scratch test per ISO 1518 (airbus requirement).

Requirements:

ISO 1518-1 Scratch Test. it requires a motorized equipment

Closed


Description:

Physical Laboratory needed for Scratch hardness testing to be performed on paninted panel per ISO 1518 for Airbus

Closed


Description:

Aerospace laboratories needed for Fastener tension and shear testing per National Aerospace Standard (Metric) NASM 1312-8 and NASM 1312-13

Requirements:

BC or WA location preferred. Testing according to NASM 1312-8, Aeronautical Fasteners Test Methods - Tensile Strength Equipment and NASM 1312-13, Fastener Test Methods for Double Shear Tests

Closed


Description:

Aerospace laboratory needed for RTCA DO-160,Testing for Commercial Aircraft

Requirements:

RTCA , DO-160

Closed


Description:

India laboratory for aerospace fuel testing to JET A1 the degradation of this product how can I see that through the lab test this JET A

Closed


Description:

India aerospace textiles laboratory needed Dry Cleaning Dry Cleaning of Aircraft Fabric as per Civil aviation standard of fabric used in aircrafts.

Requirements:

Dry Cleaning of Aircraft Fabric as per Civil aviation standard

Closed


Description:

FAA Aerospace Certification laboratory need for certification testing of fasteners to FAA form 8100 or 8130 for aircraft use to pass fire safety. Needs to pass FAA regulations 25.853(a) for flammability.

Closed


Description:

Aerospace Laboratory needed for environmental testing of the air entering our paint booth downstream of filtration for traces of chemicals utilized in treating the stored water used to humidify the incoming air.

Closed


Description:

Materials Laboratory needed for DIN Testing of testing to Nylon sleeve Aerospace -DIN 65164 Non metallic braided cable sleevings - Part 2: Technical specification. standard by Deutsches Institut Fur Normung E.V.

Requirements:

DIN 65164. We have the specs and procedures, just need a lab that can perform the testing

Closed


Description:

Aerospace Laboratory needed for Hydrogen Content Testing Hydrogen pickup on titanium tubes after etching in hydrofloric acid to Lockheed spec. mp50063 rev. b method 1a.

Requirements:

Lockheed spec. mp50063 rev. b method 1a.

Closed


Description:

USA aerospace laboratory needed for aerospace parts testing to find out what material it is made of, it's properties, how thick it is, the finish etc. How much is testing and what is the turnaround time for results?

Closed


Description:

Ohio aerospace laboratory needed for contamination testing of aviation gasoline(100LL) that has been contaminated with an unknown substance(maybe jet fuel). Needs to be analyzed .

Requirements:

confidential

Closed


Description:

Mechanical Laboratory needed for National Aerospace Standard Metric NASM Testing of brass nut products according to NASM 25027, Nut, Self-Locking, 250F, 450F, and 800F. Could have the quotation about the mechanical properties first.

Closed


Description:

UK aerospace laboratory needed for Aerospace Testing

Requirements:

Must be international companies

Closed


Description:

Aerospace Physical Laboratory needed for aerospace load testing: Wing load testing. One sample, one 16 ft wing with fuselage and two tail booms.

Requirements:

Stress and strain analysis on the wing of our aircraft. Test goes to failure.

Closed


Description:

Aerospace Mechanical Laboratory needed for aerospace parts machinery testing

Closed


Description:

USA aerospace physical laboratory needed for Tensile fatigue testing of Ti specimens at RT,and at temp up to 1200F.

Requirements:

Required friction grips to restrain the specimens.Stress level 27Ksi, R=0.05, and freq 10Hz.Specimen length 9.5

Closed


Description:

China / Asia analytical chemistry laboratory needed for ASTM Testing to ASTM F331 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)

point test to determine acceptable dryness - In a cham...

Requirements:

confidential

Closed


Description:

Large aerospace company needs USA Laboratory for Neutron Activation

Requirements:

Confidential

Closed


Description:

Southern USA physical laboratory needed for aerospace testing to IAW SP 04-003. Government Source Pressure Test

Requirements:

IAW SP 04-003

Closed


Description:

IALA Aerospace Laboratory needed for IALA certification testing of Aviation Airfield Markers & Cones.
We would like to test the point of breakage, and have this documented so we can provide to our customers as part of our Sales and Support Documentation ...

Requirements:

IALA

Closed


Description:

India mechanical laboratory needed for aerospace testing: Hydraulic System (Aircraft landing gear actuation systems)
HYDRAULIC SYSTEM: (Landing Gear Actuation System)
Hydraulic Reservoir: 30 liter capacity
Hydraulic Fluid: SERVO SYSTEM 68
Strainer (In...

Closed


Description:

Laser marking company with wire marking for aerospace needs mechanical laboratory for Boeing Certification Testing to BAC 5152 certified for laser wire marking. with the Boeing BAC5152 spec and that can do the testing. Please contact me as soon as possibl...

Closed


Description:

UK Aerospace Laboratory needed for non-destructive testing, IEEE testing:

Requirements:

IEEE

Closed


Description:

Large Aerospace Company needs Silicon Valley, California Materials Laboratory for High Performance Size-Exclusion Chromatography Testing: HPLC/GPC for MW distribution determination ASTM D5296-11Standard Test Method for Molecular Weight Averages and Molecu...

Requirements:

ASTM D5296-11Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

Closed


Description:

Europe Physical Laboratory needed for aerospace climatic testing of Aircraft Operation in climatic chamber from extreme low to high temperature.

Requirements:

Capability of chamber that control the temperature from -50degree C to +50 Degree C and operate the whole aircraft.

Closed


Description:

Southern California ASTM Analytical Chemistry Laboratory needed for testing of water (treated city water) to find out what it contains as this water spilled onto our aerospace unit.

Requirements:

ASTM. Please keep my contact information confidential

Closed


Description:

Large Aerospace Products Supplier needs USA Analytical Chemistry Laboratory to perform GC-MS of a small chain alcohol and identify all impurities.

Requirements:

GC-MS

Closed


Description:

Florida MIL Aerospace Fuels Laboratory needed for oxygen testing in accordance to MIL-PRF-27210G

Closed


Description:

Eastern USA Metallurgical Laboratory needed for testing copper rings used in aerospace industry to determine what alloy of copper was used at time of manufacture - Made by us(Premac) in 1982. Up to 10 samples can be provided.

Requirements:

No specific testing requirement spec was given to me by our customer. Simply need to know the copper alloy used for these rings.

Closed


Description:

FAA Laboratory required to perform a complete testing of a gaseous oxygen sample , per the requirements of the US DoD specification MIL-PRF-27210G Type I - ( A.B.O. ), which attends to FAA (Federal Aviation Agency).
We are an MRO in Brazil. We work unde...

Requirements:

FAAspec MIL-PRF-27210G Type I - ( A.B.O. ), which attends to FAA (Federal Aviation Agency)

Closed


Description:

OEM Aerospace Manufacturer needs metrology laboratory to outsource all metrology services for 3000 items including monitoring to performing routine calibrations, to sending them to various sources for calibration beyond our capability, repairing or sendin...

Closed


Description:

Materials Lab needed for Aerospace Testing of hand tools to Aerospace Standards AS4283, AS4984

Requirements:

AS4283, AS4984

Closed


Description:

NDT Mechanical lab needed for ASTM testing to aerospace specs including hardness testing; flourescent penetrant inspection, magnetic particle inspection; surface temper etch inspection; conductivity testing

Requirements:

ASTM and most aerospace specs

Closed


Description:

Aerospace laboratory needed for RTCA-DO-160E Section 4 category (B 2)Section 5 category testing(B),Section 7 category (B) Section 8 category (U2/F & F1),Section 15 CategoryZ(4),Section16 CategoryZ (3) ,Section 17 category A,Section 20 category Y,Section ...

Closed


Description:

Aerospace manufacturer needs materials laboratory needed for testing to identify substance on aerospace components.

Closed


Description:

Aerospace company needs physical testing for Thermal desorption GCMS to determine compounds outgassed from materials at 50C. IEST-RP-CC031.1 or similar method preferred. Indentification and semiquantification desired. Desporption temperature of 300C ex...

Closed