Laboratory Outsourcing and Scientific Sourcing Center

Need to run a short QUV comparison between three samples for accelerated weathering testing - roughly 150 to 250 hours. 

Looking to buy plastic samples with a known yellowness after artificial weathering to use as quality control. Is this something you offer or can point me in the right directio...

SINGAPORE Third-party polymer testing facility needed for testing two samples of plastic material per the ASTM standards.
In compliance with ISO 799-1:2019(E) 4.5, the plasti...

USA LABORATORY (Alabama Lab Preferred)
MULTIPLE TESTING
USA Third-Party Independent Laboratory needed for masonry accelerated weathering, staining and chemical composition t...

CANADA LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for mine waste testing to determine kinetic properties.

MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for testing automotive parts for weathering exposure.

MULTIPLE PRODUCTS
UK Contract Laboratory needed to perform weathering testing for laminated and un-laminated ink on PVC for an Ink manufacturer.

Construction Materials Laboratory needed for accelerated weathering testing on asphalt shingles roofing including advising on what type of accelerated weathering  tests are su...

USA Materials Laboratory needed for ASTM and AATCC Natural Weathering testing for IP. TPO composite material according to the following test methods:
ASTM D1435-20.
12 month...

JAPAN LABORATORY
Window Company needs Japan Laboratory for accelerated weathering testing for uPVC profiles.

USA Materials Laboratory needed for ISO plastics weathering testing to ISO 4892 Methods of Exposure to Laboratory Light Sources

MULTIPLE TESTS
MULTIPLE PRODUCTS
USA Contract Materials Laboratory needed for the following testing on bamboo material. samples against:1) Durability against wood decay fun...

Construction Materials Laboratory needed for Acrylic Elastomeric Exterior waterproof coating testing or multiple properties to multiple test standards:

Wall Coat Testin...

MULTIPLE TESTS
Materials Laboratory needed for conducting several tests on Acrylic Elastomeric Exterior waterproof coating
Kindly confirm this Test will be perform in your ...

MULTIPLE TESTS
USA Automotive Laboratory needed to perform Ozone, chemical resistance and weathering tests using Nissan Test Standards Nissan E_80838NDS00_6 (Seal Door Parti...

Construction Materials Laboratory for Solar Reflective Index value testing for white colour weathering course tile for open terraces at building. 10 samples.

Environmental Simulation Laboratory needed for weathering testing of automotive parts:
1.)test specimen exposed in UV rays weatherometer for 100 hrs. UV weatherometer shall b...

Large Coatings Company needs Materials Laboratory for weather-o-meter testing (UV aging)

Materials Laboratory needed for ASTM accelerated weathering performance testing of exterior coatingas per ASTM test methods.

Construction Laboratory needed for weathering testing for plastic tiles. The test must include the affect of sun ray specially the UV ray on the tiles, along with the affect o...

USA Materials Laboratory needed for Oxo-Degradability Testing on multiple plastic films by the following methods (but open to others)

? QUV Accelerated Weathering - ASTM...

Laboratory needed for weathering testing of bamboo material utilized in light fixtures for exposure to all outdoor elements i.e. wind, rain, sun, etc. to determine the longev...

Industrial Forensics Laboratory needed for failure analysis testing on automotive part for water contamination. Water is getting past the seals in the connector and is being w...

Materials Laboratory needed for chemical analysis of polypropylene fabric to the below specifications:

1. UV content analysis. we wish to know the exact active UV stabiliz...

Construction Laboratory needed for ANSI dry grout physical testing to two ANSI Standards 118.3 Latex Fortified Cement Based Grout: and 118.4 Modified Dry Set Cement Mortar....

Materials laboratory needed for weathering and performance testing of coatings to determine which will preserve and protect the outdoor signs from graffiti and the sun the lon...

Construction laboratory needed for environmental simulation / accelerated weathering testing of Exterior Grade High Pressure Laminates HPL as per EN-438 part-6, Decorative hi...

Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durability in accordance with ...

Laboratory needed for general performance testing of tooled shower seat as well as static/dynamic load testing and rust/aluminum (weathering) testing

Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure industry. The textiles are use...

Polymer laboratory needed for UV resistance / weathering testing to ISO-21898 of a standard polypropylene (plastic) jumbo bag for stone and iron ore. Lab in India requested. ...

Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensile strength, elongation a...

LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeric liquid coating used for...

Materials laboratory needed for NATO STANAG Testing of gun cases for dry heat, low temperature, impact, and vibration testing according to STANAG 4280 to meet NATO approval f...

Material analysis laboratory needed for the following testing on plastics:

Environmental Cycle test after 50 cycles according to PV 2005

Lightfastness according to PV 13...

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 61810 or 60255 standards

Large automotive company needs environmental simulation laboratory for DIN vehicle-level UV solar simulation testing according to DIN 75-220.Aging of automotive components in ...

Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radiation at ground level and ...

Materials laboratory needed for environmental simulation testing of a rubber door sweep product:

Ultraviolet & infrared light

High (150F) and low (-25F) temperatures

...

Electrical wiring laboratory needed for the following testing:

EPR insulation under ASTM D1149 with an ozone concentration 250 ppm through 168 hrs.

CPE Jacket under ASTM...

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

Aviation laboratory needed for performing the following tests:

ASTM-D-1149, test for ozone cracking of vulcanized rubber

FED-STD 191, weathering resistance of cloth

M...

Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:

1. Leaching test - Based on EN12457 - 2 Part 2 and EN ? 12506

2. Su...

Automotive textiles company needs materials laboratory needed for SAE accelerated weathering testing to SAE J2527 testing using Q-Sun Xenon Test Chamber Xe-3 weatherometer or...

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Wate...

Environmental simulation laboratory needed for accelerated weathering testing of a mini-installation of a playground made from glued playground tiles. Weathering simulation sh...

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching test - Based on EN12457 - 2 ...

URGENT. Automotive paint testing laboratory need for Amtec car wash testing per ISO 20566.