Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
Looking to identify substances inside a mechanical steel tube used in an automotive steering linkage system using a mass spectrometer. Have several samples ready to test. Plea...
MULTIPLE TESTING & PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
MICHIGAN (Metro Detroit area) Automotive Laboratory needed for FMVSS performance testing of GM tail lamps per ...
Materials Laboratory needed for ASTM testing of Fiberglass Reinforced Plastic (FRP) product conform per the ASTM F711-02 standard (Specification for Fiberglass-Reinforced Pla...
MULTIPLE TESTING
USA Independent automotive testing facility needed for Federal Motor Vehicle Safety Standards (FMVSS) 108 Certification testing.
- Sensitivity Testing ...
MULTIPLE TESTING
Independent lab instruments testing facility needed to provide extractability & leachability data (including potential toxicity) of silicone rubber tube & on...
Canada Laboratory needed to perform pressure testing of plastic HDPE tubing of two different sizes:
Ø7/8 OD x Ø11/16 ID
Ø1/2 OD x Ø3/8 ID
Product is a grout tubing for grou...
Contract testing facility needed to test dome houses per the industry standards (ASTM and NFP) in the US.
I found that a total of 8 tests are required:
1. Standard Test Met...
MULTIPLE TESTING
Automotive Laboratory needed for UNECER testing of 12meter coach bus accordance to UNECER 51.03 Uniform Provisions Concerning the Approval of Motor Vehicles ...
GERMANY LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for testing heat shrink tubes as per ASTM 2671(Standard Test Methods for Heat-Shrinkable Tubing for Electrical...
MULTIPLE TESTING
Contract Laboratory needed for SAE Nylon tubing testing to SAE J1131 (SAE J844) and 49CFR571.106 and DOT 49CFR571.106
LONG-TERM TESTING
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for pre-roll tubes product testing of CRC (Child-Resistant Closure) compliance for the canna...
MULTIPLE TESTING
Contract Laboratory needed for SAE Nylon tubing testing to SAE J1131 (SAE J844) and 49CFR571.106
Contract Laboratory needed for performance testing an adhesive used for paper tubing for the electronic industry. The paper is spiral wind it into round, square and rectangul...
Contract Laboratory needed for failure nalysis of failing extruded PBT buffer tubes. Appear to have die drool deposits, but would like confirmation/analysis perhaps via GPC an...
Contract Laboratory needed for ASTM rotary testing for tube fitting in accordance with ASTM F1387 Tube Fitting Performance Test Standards
MULTIPLE TESTS
Contract Laboratory needed for Din 73378 POLYAMIDE TUBING FOR USE IN MOTOR VEHICLES or DIN 74324 Approved Metric Nylon Air Brake Tubing in various metric sizes...
Automotive Laboratory neee for DIN Testing of air brake tube to Din 73378 standard Polyamide tubing for motor vehicles. . Please provide cost.
USA LABORATORY
MULTIPLE TESTS
Manufacturing company needs USA Industrial Hygiene Laboratory for dust flammability and combustibility testing of dust from polishing operati...
Materials Laboratory needed for VOC testing in medical tubing to determine substances in fluid pathway.
MULTIPLE PRODUCTS
Automotive Laboratory needed for General Motors Specification Testing to GM15787 specification Vehicle Exterior and Add-On Parts Paint Appearance Requiremen...
Manufacturer needs Laboratory NF water taps certification
BUDGET APPROVED ($2,500)
Plastic Company needs Materials Laboratory for MIL STD detrimental material analysis of 3.000 Diameter Natural Nylon Extruded Rod to MIL STD 2041 CO...
Tube Fitting performace testing as per ASTM F1387
Automotive Laboratory needed for FMVSS 121 Federal Motor Vehicle Safety Standards No. 121; Air Brake Systems testing
LONG-TERM TESTING
MULTIPLE PRODUCTS
MULTIPLE TESTS
Large Construction Company needs large Construction Laboratory for testing industrial complex manufacturing concrete, GFR...
Automotive Laboratory needed for ANSI Testing to ANSI Z26.1,Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety...
Contract manufacturer needs Automotive Laboratory for quoting on a large order of custom hinges (end use military application) first article inspection including longitudinal ...
North America (USA or Canada) Environmental Analytical Chemistry Laboratory needed for EPA Nitrosamine testing according to EPA Method 521 to measure nitrosamine content in th...
Acoustics Laboratory needed for reverberation measurement on sound transmission through a 10mm rubber tube.
Mechanical Laboratory needed for ASTM Testing of double ferrule compression fitting for pipe/tube connecting to ASTM F1387(2012) Standard Specification For Performance Of Pipi...
Industrial Laboratory needed for ASTM tube fittings testing including hydrostatic burst test, Make break test,Reassembly test & Hardness test.Sizes:-1/4-1.to conform to AST...
USA Automotive Laboratory needed for certification of motor vehicle parts to specifically adult car seat safety to FMVSS.
Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seating Systems
Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static rolling ability
coastin...
Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
for Glazing Motor Vehicles...
Automotive laboratory needed for SAE electrochemical resistance testing of coolant hose and materials. As per SAE J1684 Method #1, referred to as a Brabolyzer test, is a whole...
Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of motor vehicles
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recomm...
Glass laboratory needed for ballistic impact testing to meet NATO standards 1, 2, or 3 to MIL SPEC Level 4.
Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in ...
Medical devices laboratory needed for ISO Testing of medical breathing tubing to ISO 5367 Annex A, Annex C, Annex D, Annex E, Annex F, testing of tubing:
ANNEX A: RESISTANC...
Automotive laboratory needed for UNECE vehicle safety testing automotive anti-lock brakes according to ECE R13H.
Engineering laboratory needed for testing of automotive sensors according to IPX9K of (24) Automotive Sensors approx. 25mm OD X 45 mm long. A slight variation to the spec is n...
Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding of the emulsion proved elu...
Power company needs Laboratory for engine ash deposits testing taken from GE Jenbacher Gas engines.
Automotive laboratory needed for VW Testing toVTL 956 (VW Test Requirements for reflectors
Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm for at least stacking co...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests