Contract Laboratory has received the following incoming Laboratory Testing and Scientific Research Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory Testing and Scientific Research. If you need a Laboratory, please Submit a Laboratory Testing Request. If you need assistance or have questions email us or call toll free 1-855-377-6821.
LONG-TERM TESTING Clinical Diagnostic laboratory needed that runs TB assays/tests to conduct a comparison study of TB sample processing methods. - samples would then be run on MGIT, LJ. Would also like to look at Xpert and LPA assays as well if available in the lab.
LONG-TERM TESTING Medical Company needs Genetics Laboratory for clinical genomic testing using either microarray to NxtGen testing for our patients. We have a set of more than 150 clinical relevant genes that need to be evaluated for SNPs from a buccal swab.
Medical Device Laboratory needed for ASTM Testing of personal lubricants for compatiability with natural rubber latex, polyurethane and synthetic condoms as per ASTM D7661-10. Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
Organic Farm developing aromatic and medicinal herbs for essential oil and absolute production needs Analytical Chemistry Laboratory for testing to determine the chemical characteristics and chromatographic analysis of wild Thyme essential oil known as Oreganum stratum
Large Organization needs Medical Device Laboratory for comparison study on 3 or 6 Surgical gowns suppliers testing against BS EN 13795 , including Wet Penetration , Dry Penetration, Mircobial cleanliness , particulant matter& linting , liquid penetration and tensile strength (with various BS En references to these)
Medical Device Laboratory needed for Clinical Study urine analysis for concentration of leukocytes. The following needs to be performed: Negative urine is spiked with a specific concentration of Leukocytes There are 9 concentrations of Leukocytes 30 applicants (urine test strips) must be tested at each one of the 9 concentrations. These 30 test strips must represent 3 different lots (10 strips from Lot 1, 10 strips from Lot 2, 10 strips from Lot 3) 4 different mobile phone models will be used to test the 30 applicants at each concentration
Large Healthcare Company needs Pharmaceuticals Laboratory for SMEPAC/Surrogate powder test as part of performance testing of equipment. using lactose monohydrate as surrogate powder. The test will be performed on 3 units: 1 isolator (OEL: 0.1ug/m3) and 2 downflow booths(OEL: 100ug/m3). The estimated total number of samples for each unit is 26.
Medical device manufacturer seeking testing compliant with ISO 15747:2010, Plastic containers for intravenous injections relating to safe handling and the physical, chemical, and biological testing of plastic containers for parenterals. Please inquire for further information on the product we are testing.
Laboratory needed for ASTM seawater biodegradability testing of biomaterial composites to determine if the materials degrade in marine water to ASTM D6691 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
Clinical Laboratory needed for Amino Acid bioavailability study (approximately 864 samples) with bioanalysis for Alanine, arginine, aspartic acid, carnitine, cystine, glycine, glutamine, histidine, isoleucine, leucine, lysine, methionine, proline, serine, taurine, tyrosine, threonine, tryptophan, valine
LONG-TERM TESTING Pharmaceutical Microbiological Testing Laboratory needed for the USP Preservative Effectiveness Testing , Suitability test, and regular microbial testing (USP<61><62>) on cosmetics, pharmaceuticals semisolid, suspensions, solutions products/prototypes including non-sterile creams, lotions, gels, solutions prototypes/products samples.
LONG-TERM TESTING Dietary Supplement Analytical Chemistry Laboratory needed for purity testing of growth hormones
ostarine (mk-2866) ibutamoren (mk-677) cardarine (gw-501516) ligandrol (LGD-4033) andarine (s4) yk-11 rad-140 s-23 sr9009
We are looking for a company that has already the standards of each hormones.
Large Corporation needs Consumer Research Laboratory for consumer panel flavor study on beverage can coatings to determine if the specific type of can coating is changing the taste of the beverage over time to know if taste test participants can distinguish the difference in the taste of the beverage based on the type of beverage can coating used.
Bioanalytical Laboratory needed for assay of select inflammatory biomarkers to confirm the presence of inflammatory cytokines: CXCL1, TNF alpha and IL1b in murine corneal tissue. The frozen specimens of murine corneal tissue subsequent to treatment with LPS in order to induce corneal inflammation. We are requesting assay of select inflammatory biomarkers to confirm presence of inflammatory cytokines. We anticipate submission 10 specimens for analysis. Analyses should be done in duplicates.
Pharmaceutical company needs a laboratory capable of identification testing on a couple of petrochemical products such as mineral oil and petrolatum via maybe GC-FID. Our purpose is to link potential grade of mineral oil and petrolatum in a commercial ointment product.
Bioanalytical Laboratory needed for dose response tests and coagulation assays to determine if there are anti-coagulation properties in 10-20 small molecule viral inhibitors compounds. Due to the chemical nature of these compounds, we are concerned that they may have anti-coagulation properties. As such, we are looking to get information and pricing on coagulation assays to see whether these compounds alter normal blood coagulation.
Analytical Chemistry Laboratory needed for pheromone concentration testing of 18 pheromones in (human) pheromone compounds: 1 alpha-androstenol 2 androstadienol 3 androstadienone 4 androstanone 5 androstenone 6 androsterone 7 androsterone potassium sulfate 8 ß-androstAnol (Molecule A) 9 ß-androstenol 10 dehydroepiandrosterone sodium sulfate 11 dehydroisoandrosterone 12 dihydrodeoxycorticosterone 13 DHEAS 14 epiandrosterone 15 estratetraenol 16 phenylandrosten-3a-ol 17 (trace) tetrahydrodeoxycorticosterone 18 human copulins
FDA GLP Medical Device Product Safety Laboratory needed for ISO 10993-1 biocompatibility studies for implantable bone graft substitutes (granules), xenograft (from bovine bone) and a biphasic calcium phosphate Cytotoxicity- Sensitization- Irritation or intracutaneous reactivity- Systemic toxicity- Subchronic toxicity- Genotoxicity- Implantation
US Nutraceutical Manufacturer needs Dietary Supplement Laboratory for confirmation testing of the Certification of Analysis of HPMC capsules it purchases to encapsulate a nutraceutical. The manufacturer provides a COA for each lot. We need to verify results on the COA which includes identification of HPMC.
LONG-TERM TESTING Nationwide medical network needs clinical diagnostic laboratory with PCR capabilities for testing 30 plus pathogens and antibiotic resistance with a turnaround time of 24-72 hours along with other Repertory, Urology, Wound Sequencing,Nail Clippings, and Gastrointestinal testing.
LONG-TERM TESTING Pharmaceutical Laboratory needed for raw material release and vendor qualification testing with full USP/NF/Ph.Eur. testing and method verification for three lots of all the following materials Materials: Cholesterol Sucrose L-Histidine Ammonium Sulfate Sodium Succinate (Disodium Succinate Hexahydrate) Vitamin E (tocopherol) Methanol Alcohol (Ethanol) Methylene Chloride Hydrochloric Acid Sodium Hydroxide
Please be sure to read the requirements and submit the information requested.
Medical Device Laboratory needed for ASTM Testing of Protective Clothing to the following standards: ASTM F1670/F1670M Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood, ASTM F1671/ F1671M Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System, ASTM D882 Standard Test Methods for Tensile Properties of Thin Plastic Sheeting, ASTM F1342/ F1342M Standard Test Method for Protective Clothing Material Resistance to Puncture, ASTM D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
Medical Device Laboratory needed for cleaning and validation studies to support our class II medical device 510(k) submissions to the FDA- will need to go over specific instructions for use, the level of disinfection and the type of microorganisms chosen for the test.
Analytical Chemistry Laboratory needed to test Argon (gas) as per European Pharmacopeia (Ph.Eur.). Specifically we are interested in impurities determination by GC as described in EP monograph for Argon: GC with stainless steel column 4 m x 4mm and molecular sieve for chromatography R (particle size 150-180 micras, pore size 0.5mm). Detection: discharge ionisation. Limits for impurities as per our dossier will be: - oxygen: not moret than 5.0 ppm v/v - total hydrocarbons (methane): not more than 0.5 ppm v/v - nitrogen: not more than 5.0 ppm v/v
Medical Device Laboratory needed for testing of a filter developed for a medical application. The filter consists of a pleated element to trap particulates and a carbon-based filter to trap VOC's. The following testing is required:
1 - A trace showing the % retention of 1u, 2u, 3u particles over time @ 9 liters/min initial flow, and flow decrease over time. 2 - In a smoke-filled environment, trace flow decrease vs. time starting at 9 l/min to 6 l/min to 0 flow.
3 - Evaluate filter behavior in a humid environment - 98.6 deg F @ 95% humidity
4 - Evaluate the filter's removal of noxious odors
5 - In a smoke-filled chamber, evaluate the filter's particulate removal in recycle mode as a function of time (perhaps via light scattering and Beer's Law?).
Histology Laboratory needed for histological (H& E) studies on following area 1. Cerebrum Male rat control × 200 & × 400 2. Iscahemia for Carotid Vessel for 25 minutes × 200 & × 400 then perfusion for one hour 3.Ischaemia for 3-5 minutes then perfusion for one hour ×200 ×400
LONG-TERM TESTING Genetics Laboratory that can handle large volumes of testing needed for Pharmacogenetic and Hereditary Cancer testing:
PGx- All CYP, Factor II Factor, MTHFR, SLCO1B1, VKORC1 - Swab Testing Only
Hereditary 28 Panel Cancer Screening Swab test + individual report.
FDA cGMP/ ISO 17025 Pharmaceutical Microbiology Laboratory needed for USP monograph, stability and compliance testing of sterile and non-sterile compounded pharmaceuticals to 21 CFR parts 210 and 211, the Compounding Quality Act and USP <797> for sterile and <795>.for non-sterile. . Laboratory must have validated potency method for APIs. including : o 201070 BENZOCAINE 20% / LIDOCAINE 10% / TETRACAINE 10% EMULSION CREAM o 201010 BENZOCAINE 20% / LIDOCAINE 10% / TETRACAINE 10% EMULSION o 201020 LIDOCAINE 23% / TETRACAINE 7% CREAM o 011021 NIACINAMIDE 4% / TRETINOIN 0.05% CREAM o 011013 NIACINAMIDE 4% / TRETINOIN 0.025% CREAM ? For microbial/ yeast/mold and endotoxin testing they must have a rapid scan method)
Pharmaceutical Analytical Chemistry Laboratory needed for conducting studies on the Active Pharmaceutical Ingredients APIs in an oil in water emulsion. We need to arrive at following conclusions by morphological/physical/chemical testing etc
1. Whether APIs are dispersed or solubilized (both APIs). 2. Phase in which each API is present (dispersed phase of emulsion or continuous phase of emulsion) 3. Particle size of API (for dispersed API). Separate PSD for each API if both are dispersed. 4. Globule size of emulsion.
LONG-TERM TESTING Medical Device Microbiology laboratory of Bioburden and sterility testing for implantable medical device. WE will send product for testing after sterilization using gamma radiation as the method of sterilization. 20 samples/ product family (4 families) every quarter.
LONG-TERM TESTING Microbiology Laboratory needed for MIC testing of pharmaceutical test articles with or without 5% Fetal Bovine Serum (FBS) with the following test organisms:
1. S.Aureus ATCC 29213 2. S. Aureus 33591 3. P. Aeruginosa ATCC 27853 4. P. Aeruginosa 1674623
Test Articles: Collodial Ag nanoparticles + Zinc citrate in sterile water suspension. We will supply all test articles.
1. Ag 30 ppm 2. Ag 100 ppm 3.Ag + Zn at 30 ppm each 4. Ag+ Zn at 100 ppm each 5. Ag at 30 ppm and Zn at 2000 ppm 6. Ag at 100 ppm and Zn at 2000 ppm 7. Citrate (vehicle control) 8. Ciprofloxacin (positive control)
Bioanalytical Laboratory needed grow Human Primary Trophoblast cells with serum and without serum for varying amounts of time (0, 24hrs, 48hrs, 72hrs, and 96hrs). Then immunofluorescence stain the cells with GLUT8 and Humanin for images.
We are looking to have a data point for every combination of serum, time,and staining: serum: with and without time(hrs): 0 (control), 24hrs, 48hrs, 72hrs, and 96hrs staining: GLUT8 and Humanin (if possible, also co-staininng with lysosomal markers)
We also need to have a non-isotype IgG negative control.
For immunofluorescence images, we would like at least 40x magnification.
Healthcare manufacturer needs Microbiology Laboratory for Bacterial Suspension Testing using P. aeruginosa. Specifications are: Suspensions diluted to 10^-6 and 10^-7 in sterile saline, pour plated in 0.2 ml amounts in Trypticase Soy Agar and incubated 24-48 hours at 33C to 37C. T0: 4.3 x 10^7 7.6 x 10^8 CFU/ml T6: 4.6 x 10^7 7.6 x 10^8 CFU/ml
LONG-TERM TESTING Small business that manufactures topical homeopathics in small batches needs microbiology laboratory for USP Batch Testing to USP Standards: USP 61 MICROBIOLOGICAL EXAMINATION OF NONSTERILE PRODUCTS: MICROBIAL ENUMERATION TESTS and/or USP 62 MICROBIOLOGICAL EXAMINATION OF NONSTERILE PRODUCTS: TESTS FOR SPECIFIED MICROORGANISMS
Plant based dietary supplement manufacturer need bioanalytical laboratory for blood testing for the measurement of NAD in human blood (Nicotinamide adenine dinucleotide - a coenzyme found in living cells). We are interested in proper quantitative measurement of NAD in blood, and from our research we came to know that HPLC is one of the methods to measure it.
FDA registered and cGMP compliant analytical chemistry laboratory needed for latex and/or DEHP (Di Ethyl Hydroxy Phthalate) testing on rubber closures (stoppers) or syringe pistons used for injectable pharmaceuticals. We are not currently looking for a full extractable/leachable study, just the ability to test for the specific items.
Skincare company needs dermatology clinical research laboratory for development of a protective cream for prolonged work in gloves that helps avoid excessive sweating on the skin of hands, restrains the growth of harmful microorganisms (bacteriostatic effect), and improves microcirculation in the vessels of the skin of hands, protects cells from harmful factors. This product has 3 main properties, which need to be confirmed: 1) Antiperspirant effect 2) Improvement of cutaneous respiration 3) Bacteriostatic effect We are planning to register this product as a cosmetic product. So we have to confirm these claims with test reports by 1) Antiperspirant effect was confirmed by gravimetric method and method the probe of Minor (iodine-starch test). The effect of the product was shown to be lasting up to 4 hours. 2) Skin respiration (cutaneous re
Medical Devices Laboratory needed for performance and microbiology testing of medical textiles to EN 13795: 2011 A1: 2013 including Tensile strength - dry and wet - EN 29073-3:1992 Burst strength - dry and wet - EN 13938-1Resistance to fluid penetration - EN 20811Cleanliness microbial - EN 1174 (replaced by EN ISO 11737)Cleanliness particulate matter - ISO 9073-10Linting - ISO 9073-10 Resistance to microbial penetration - dry - ISO 22612Resistance to microbial penetration - wet - ISO 22610.My main question is, if you are able to perform such tests?
Microbiology laboratory needed to run BACTEC blood culture incubation on a variety of blood samples inoculated with different strains and concentrations of Staphylococcus aureus. Our design would necessitate approximately 30-40 samples be run. We are interested in time to threshold of detection and which samples do not reach threshold at 5 days.
Agriculture biotechnology company needs EPA GLP environmental toxicology laboratory for 4 ecotoxicology studies for a botanical active substance under EU requirements: - Biodegradable test (OECD 301) - Chronic toxicity study on bees - Bee larvae brood study - Typhlodromus piry, Aphidius rophalosiphi, Chrysoperla carnea, Coccinela sectempunctata. We would really appreciate a quotation for these four tests. Best regards
University researcher needs laboratory to perform in-vitro study of antiulcer activity of plant extract according to the methodology methodology is Inhibition of Histamine stimulated Adenylate cyclase from gastric mucosa using guinea pigs. The in vitro potencies of H2-antagonists can be evaluated using determinations of adenylate cyclase activity in membrane preparations of guinea pig mucosa after stimulation with histamine. Reference: Drug Discovery and Evaluation, by H. G Vogel, pg. no. 861
Genetics laboratory for proteomic analysis of a raw material product, to identify the gene source and expression vector, and perform peptide sequencing to obtain amino acid sequence of the material present in the samples. Probably LC ESI MSMS or LC MALDI MSMS or combination of the two.
Virology laboratory needed for performing PCR analysis for many different rabbit and porcine viruses based on the guideline (CPMP_BWP_3354_99), as follows. CPMP_BWP_3354_99: http://www.ema.europa.eu/docs/en_GB/document_library/Scientific_guideline/2009/09/WC500003222.pdf:
For rabbit viruses: Rabbit rotavirus, Reovirus type 3, Poxviruses, Rabbitpox (RPXV), Myxomatosis virus (MYXV), Shope fibroma virus, Rabbit haemorrhagic disease virus (RHDV), Rabbit papillomaviruses, Rabbit kidney vacuolating virus, Herpes cuniculi Adenovirus, Encephalomyocarditis virus, Borna disease virus, Sendai virus, Simian Parainfluenza (SV-5), Pneumonia virus of mouse (PVM).
For porcine viruses: Enveloped Viruses, Influenza virus A (,airborne), Nipah Virus & Menagnel Virus (paramyxoviruses), Vesicular Stomatitis Virus (aerosols), Pseudorabi
Medical Device laboratory needed for surgery simulation and functional testing of sterile surgical packs after sterilization including on: - aged samples (2 years past used by date) for: appearance (noting any signs of discolouration) - functionality (whether the components within the pack show no adverse affect on the brittleness of the plastics, bungs breaking up in syringes etc).
Life Science company needs laboratory for NMR spectras to help determine if there are steroimpurities. Spectras at NMR: 1H-13C HSQC 400-500MHz. We need one spectrum at room temperature and another at a different temperature (>15C degree difference). So 4 spectra total, 1H, 13C and at two temperatures.
Medical device laboratory needed for drug compatiblity testing and testing of parenteral IV containers to ISO 15747:2010 which contains requirements that relate to the safe handling and the physical, chemical and biological testing of plastic containers for parenterals. ISO 15747:2010 is applicable to plastic containers for parenterals having one or more chambers and having a total nominal capacity in the range of 50 ml to 5 000 ml such as film bags or blow-moulded plastic bottles for direct administration of infusion (injection) solutions.
On the same lines I need to collaborate to test the following in my products:
(i) Ideal Uniform Self Collapsibility (ii) logarithmic volume measurement for infused volume (iii) No Exchange of Hazardous Contaminants with Environment (iv) Residual Volume in Container (v) No Suck Back in th
Medical Device Laboratory needed for conducting safety and efficacy study of ear candle which assists with ear wax removal. The study should show that the ear candles do not cause burns, do not produce a suction or vacuum in the ear and do not introduce any contamination into the ear.
FDA Medical device microbiology laboratory needed to perform multi-use testing assay on a liquid bandage medical device product. This assay is similar to USP51 testing and will use the 5 specified microbes, but it must have repetitious bioburdens applied to simulate a multi-use, (ie. ~50 uses) environment for the non-sterile liquid bandage product. The produc unit and the applicator with which bioburden contamination will occur is a propylene brush.
LONG-TERM TESTING FDA GLP textiles laboratory needed for testing to provide profilometry data on our fabric samples used in medical / performance clothing products. We are interested in determining if this analysis could help us quantify texture between fabric samples.
Pharmaceutical bioanalytical laboratory needed for Large Volume Parenteral (LVP) assay, related substances, degradation and impurity profile of amino acid infusion 7%, 8% & 10% by validated HPLC/ UHPLC test method.
Technical Requirements include:
- Sharpen peaks individually - Good resolution between the peaks (at least 2) - Acceptable theoretical plates (More than 2000) - Constant retention time for each analysis
FDA Medical Device Laboratory needed for ISO VOC, particulate, CO and CO2 testing for ventilator components with dry gas pathway contact for emergency and transport ventilator to ISO 10993-1, Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
FDA GLP Medical Device Laboratory needed for performance testing of medical resuscitator to ISO 10651-4 Manual Resuscitator. The test to be performed include: Delivered O2 concentration - Expiratory resistance - Inspiratory resistance - Patient valve - (Dead space - Tidal Volume
LONG-TERM TESTING Bioscience company needs bioanalytical laboratory for raw material, in-process, and final product MAT or cell-based endotoxins testing with assays that are not based on the LAL or rProtein C methods for endotoxin detection. The liquid formulation of both proteins and polymers. We would need to have endotoxin testing performed with a MAT or cell-based assay, since we already know that protein interferes with the LAL and rProteinC methods.
Pharmaceutical laboratory needed for accelerated stability studies to verify the 24 month expiration date of unit dose OTC medication. Company is repackaging ibuprofen 200 mg soft gels that the manufacturer has packaged in bottles into 2 pills per unit does in paper-poly foil pouch.
Clinical laboratory needed to perform clinical study of product that lowers your blood alcohol content with 150 people with 100 being given the product and 50 a placebo. The test subjects will have to drink three 1.5 ounces of vodka in an hour. Their blood alcohol will need to be tested with 20 individual DOT certified breathalyzers every half hour. The study will need to last 3 hours from beginning to end.
Bioscience company needs laboratory for simple phytochemical screening for the presence of various classes of phytochemicals in an aqueous sample., The compound classes include: Alkaloids, Bioflavonoids, Cardiac glycosides, Carotenoids, Phenolics, Saponins, Sterols, Terpenoids, etc.
Medical device laboratory needed for cleaning validation study of the water cleaning cycle of a plastic covered electronic tracking device . Simulation of the a 150C temperature water cleaning cycle for 30 minutes over a 500 cycles tis needed to ensure that this product can withstand the temperature, time and cycles. I would provide a fixture with 10 units for this test
FDA GLP bioanalytical laboratory needed for bioanalysis of bovine IgA content of spray-dried bovine plasma, whey protein, and animal feed (containing bovine plasma/whey protein) by HPLC chromatography. The samples would consisting of 1 plasma sample, 3 whey samples, and 3 animal feeds.
Medical Device laboratory needed for ISO pre-compliance filter testing on medical ventilation module in accordance with ISO 23328-1:2008 standard, Breathing system filters for anaesthetic and respiratory use Part 1: Salt test method to assess filtration performance The standard specifies a salt (NaCl) filtration challenge.
Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: General requirements for basic safety and essential performance and IEC 60601-2-2 Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
Biosciences company needs bioanalytical laboratory for in-vitro anti-biofilm activity testing by Minimal Biofilm Eradication Concentration (MBEC) assays using peg lid containing biofilm plates on aqueous samples. Biofilm producing bacteria of interest are: initially - staph aureus, with others to follow.
Preclinical laboratory needed for method development of an immunofluorescence method to be used for nuclear beta catenin and applied to preclinical studies with human cancer tissue and to clinical trial specimens.
Due to nature of drug action, method must be specific for detection of nuclear, and not cytosolic, beta catenin. Method will require confocal microscope. We have the antibody for nuclear beta catenin available commercially.
Bioanalytical laboratory needed that can analyse the substance identity of two different enzymes for the purpose of the European REACH Regulation. The following characteristics should be analysed:
-Composition of the substance (purity, impurities, stabilizing agent, inhibitors or other additives*) Example for typical constituents, Additives, Impurities:
-Enzyme, e.g. Amylase, - alpha-amylase (active enzyme protein)
-Protein as a constituent of enzyme deriving from the fermentation or extraction process
- Carbohydrates constituent of enzyme deriving from the fermentation or extraction process
- Inorganic salts as a constituent of enzyme deriving from the fermentation or extraction process
- Lipids as a constituent of enzyme deriving from the fermentation or extraction process
-Spectral or chromatographic (HPLC, GC
Preclinical Contract Research Organization CRO needed for Non-GLP , in-vivo anti-pyretic testing of a powdered based analgesic drug. Company would like to consult with the CRO on the experimental design. It's first option is in rats, but they may consider other animal species.
Bioanalytical laboratory needed to conduct 3 studies as part of food clinical trials including:
1- Study of the changes in faecal bacteria populations using 16SrRNA probes labelled with Cy3 for specific bacterial groups or the nucleic acid stain DAPI for total bacterial counts. The bacterial groups selected for enumeration will be Bifidobacterium spp., Bacteroides/Prevotella spp., Lactobacillus/Enterococcus spp., Clostridiumcoccoides- Eubacterium rectale group, Clostridium histolyticum group, and Atopobium cluster including most Coriobacteriaceae species, using the specific probes Bif164, Bac303, Lab158, Erec482, His150, and Ato291, respectively 2. Fluorescence insitu Hybridisation (FISH), as described by Rycroft et al. (2001) and Daims et al. (2005). Briefly, faecal samples (375?l) fixed in 4% paraformaldehyde (pH7.2) overnight at
LONG-TERM TESTING Food laboratory needed for liquid meal replacement analysis for electrolyte content (ex. sodium, potassium, calcium), fat content (saturated/unsaturated/omega), and glycemic load. One sample would also require measurement of chondroitin/glucosamine levels.
FDA GMP medical device laboratory needed for testing to support FDA 510(k) based on FDA-recognized consensus standards: 3-80 AAMI ANSI ISO 81060-1:2007/(R)2013 - Non-Invasive Sphygmomanometers - Part 1: Requirements And Test Methods For Non-Automated Measurement Type and 3-96 ISO 81060-1 First Edition 2007-12-01 Non-Invasive Sphygmomanometers - Part 1: Requirements And Test Methods For Non-Automated Measurement Type
LONG-TERM TESTING FDA GMP bioanalytical laboratory needed for developing and validating bioassays in bulk substance high-titer antibody biologics (PPM sensitivity) including bioanalysis for antifoam residuals and an assay for Pluronic F68 excipient level (quantitative). Osmolality by vapor pressure.
LONG-TERM TESTING Private clinical trial and internal medicine practice needs CLIA certified clinical laboratory to perform all routine clinical blood analysis for both reasearch / clinical study qualification and montitoring as well as the private internal medicine practice.
FDA GMP pharmaceutical analytical chemistry laboratory needed for mass spectrometric identification analysis of our reference standards. A high resolution MS (e.g. Orbitrap instrument, Time-Of-Flight instrument) is required in order to extract an exact mass of analyzed substance and identify the molecular formula from raw data.
Medical device laboratory needed for ISO testing of blue light and UV ray blocking optical lenses including ISO 8980-3, Ophthalmic Optics - Uncut Finished Spectacle Lenses - Part 3 Transmittance Specification and Test Methods.
ISO 14889, Ophthalmic Optics - Spectacle Lenses - Fundamental Requirements for Uncut Finished Lenses.
ISO 17025 medical device laboratory needed for full VDmax25 sterilization validation on titanium orthopedic screws to ISO 11137 including bioburden validation (correction factor), bioburden determination on three lots of product, delivering the verification dose, sterility testing, microbiological identification and BF testing. We are also seeking BF testing on a titanium intramedullary nail.
Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:
F2052 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
F2119 Test Method for Evaluation of MR Image Artifacts from Passive Implants
F2182 Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
F2213 Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
IEC 60601-2-33 Medical Electrical Equipment Part 2-33: Particular Requirements for the Safety of Magnetic Resonance Equipment for Medical Diagnosis,
ISO 14971 Medical Devices Application of Risk Management to Medical Devices,
LONG-TERM TESTING Large pharmaceutical company needs analytical chemistry laboratory for weekly testing of four different compound lots: a water wash, a PBS wash, an IPA wash and a Hexane wash. Water wash - Tetramethylendiamine, acrylic acid, polyethylene glycol, methylenebisacrylamide and acrylamide. PBS wash - dyes (red, blue, yellow, orange and black), aminoethyl methacrylate, bisacrylamide and glycerol methacrylate, PEG 10K, SPAN80, Hexane, IPA, tetramethylendiamine. Hexane wash - Hexadecane and SPAN 80 IPA wash - Hexadecane
***Requester has specified that responses be submitted with quote.
FDA cGMP microbiology laboratory needed for microbiological and sterility testing of generic drug products (tablets, capsules, and injections) including EP European Pharmacopoeia microorganisms parameter assays, microbial enumeration tests, total aerobic microbial count (TAMC) CFU/g or GFU/ml, total combined yeasts/molds count (TYMC) CFU/g or GFU/ml, microbiological identification, Escherichia coli, Salmonella, Pseudomonas aeruginosa, and Staphylococcus aureus.
Medical device laboratory needed for physical ASTM testing of a range of titanium surgical-grade products to the following ASTM Standards: ASTM F2052 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment, ASTM F2119 Test Method for Evaluation of MR Image Artifacts from Passive Implants, ASTM F2182 Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging, and ASTM F2213 Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
ISO and FDA cGMP Medical Device Laboratory needed for validation study of the cleaning, disinfection (manual and automated), and sterilization of medical devices including bioburden, sterility, endotoxins, validation of sterilization procedures, and validation the cleaning and disinfection process to comply with requirements of CE (EC) and also those of the FDA. We are aware that some tests / tests differ.
Medical Device Laboratory needed for microbiology and physical testing of medical drapes and surgical gowns to several EN ISO standards: 1. EN ISO 22612 Resistance to Microbial Penetration - Dry, 2. EN ISO 22610 Resistance to Microbial Penetration - Wet, 3. EN ISO 11737-1 Cleanliness - Microbial, 4. EN ISO 9073-10 Cleanliness - Particulate Matter/Linting, 5. EN 20811 Resistance to Liquid Penetration 6. EN ISO 13938-1 Bursting Strength - Dry, 7. EN ISO 13938-1 Bursting Strength - Wet, 8. EN 29073-3 Tensile Strength - Dry and, 9. EN 29073-3 Tensile Strength - Wet
Medical Device laboratory needed for physiochemical testing including thermal, mechanical and dynamic analysis to support the development of a new transdermal patch. Studies to include rheology measurements on native adhesive and the drug-in-adhesive formulation to assess changes in the visco-elastic properties of adhesive, elastic or storage modulus, viscous or loss modulus, ratio of viscous to elastic modulus, and intrinsic or complex viscosity.
Large company needs medical device laboratory needed for ASTM testing of 4 orthopedic products including metallic medical bone screws, metallic angled orthopedic fracture fixation device, external skeletal fixation device, and metallic bone plates to ASTM F543 Annex A1, A2, A3 / ASTM F384 Annex A1, A2 / ASTM F382 Annex A1, A2 / ASTM F1541 Annex A5 and ISO 10334 or ISO 5838-1.
Bioanalytical laboratory needed for 3rd party verification of a cryopreserved amniotic allograft tissue sample using an automoted cell counter: Countess II FL. A simple tri pane di exclusion test
The sample will be shipped next day on dry ice. We will need the testing to happen soon after arrival. The sample should be kept at -80 degrees celsius or in a liquid nitrogen freezer until testing is ready.
Once ready to test sample, simply pull the sample out and let thaw at room temperature.
FDA GLP and EPA Industrial Hygiene laboratory needed for antimicrobial efficacy testing of a organo-silane antimicrobial agent against a variety of viruses including Norovirus, H1N1, Rotavirus and Ebola to demonstrate efficacy. The active antimicrobial ingredient is CAS 27688-52-6 at 0.75% concentration in an aqueous solution.
Mode of action : organo-silane is applied to a clean surface and allowed to dry. Active ingredient copolymer bonds to the treated surface forming a biostatic film that is bound to the surface. Organisms are attracted to the bound long chain molecule and cell walls are are disrupted by the long carbon chain (lyses) and electrically disrupted by a positively charged nitrogen ion.
Dear Laboratory team I?m Henry from Happy Secret USA Enterprise company, from San Jose, California, nice to meet you Now we are going to do COA(Certifacate of Analysis) testing our private label supplement dietary health care product (Full Body Detox) We need to make sure the ingredient and content testing result match with the ingredient and content in the label before launching this new products in the market I'm looking forward to your kindly help and support Please contact me via 1) Email: firstname.lastname@example.org 2) Cell Phone: 408-908-0153 Here below is our product information Type: Dietary Supplement Name: Full Body Detox Number of Sample: 10 bottles Require: Testing result ingredients and content same as the label
Veterinary toxicology laboratory needed for in vivo (canine) ingestion toxicity, oral toxicity, acute dermal toxicity, and dermal irritation studies on OTC topical treatment for canine atopic dermatitis. Ingestion / oral toxicity is of concern due to potential for the animal to ingest the product after application.
LONG-TERM TESTING Microbiology laboratory needed for anti-viral testing of solution to treat a wide spectrum of viruses. Company would like to conduct some basic dish tests in which the reagent is applied to bellwether viruses, such as Influenza A & B, Norovirus, Enterovirus, and Equine Virus.
Pharmaceutical Contract Research Organization (CRO) needed for preclinical study of efficacy of antimicrobial peptides against corona virus causing Middle Eastern Respiratory Disease including Anti-MERS-CoV assays of the putative AMP as well as cell viability assay.
Veterinary Medicine preclinical opthalmology contract research organization (CRO) needed for an in vivo study of a drug product for a veterinary ophthalmology resident research project. Client is interested in administering the medication q8 hours to >10 healthy adult cats for 12 weeks.
URGENT TESTING: Large corporation needs industrial hygiene laboratory for equipment cleaning validation study testing using Texwipe TX751 to test for the antibiotic telafloxacin; 84 swabs (maximum allowed is 200mcg per sample); and Texwipe TX714K to test for the cleaning agent Cip100 84 swabs (maximum allowed per sample of 200mcg)
LONG-TERM TESTING: FDA cGMP Pharmaceutical analytical chemistry laboratory needed for USP testing of two API: 1. Dicalcium phosphate dihydrate as per USP monograph by DSC for limit of fluoride by titrator 2. Povidone (Plasdone K-29/32) - as per USP monograph for A) Lead by chemical method B) Aldehyde C) Formic acid by HPLC
Clinical research laboratory needed for preclinical studies of the effect of a novel molecule in treating the delay in process of myelination. Study to include toxicology, immunology, as well as hematological studies relating to the process of coagulation and fibrinolysis.
Biomechanical / medical device laboratory needed for development of spinal implantable device manufactured with implantable grade PEEK and Titanium 3. The following testing is required: 1. Slippage test - the implant spikes or serration should be strong enough so that it should not slip from the two bones,
2. Load bearing test - the implant should be able to take the load of up to 5kg,
3. Compression test - the implant should not slip or crushed while its compressed by surgical instrument, and
4. Biocompatibility test - the implant should not react to human tissues while inside the human body permanently.
University Researcher needs veterinary medicine laboratory needed for measuring fat soluble vitamin A and E levels in plasma and in milk samples on high sensitivity equipment capable of measuring vitamin levels of For vitamin A (as retinol), levels are 0.02 ? 0.05 ug/ml in (vs. 0.2-0.6 in humans) and for Vit E, about 0.1-1.0 ug/ml in elephants (vs. 5-10 in humans). For Vitamin A, we also want to look at Vit A esters, as well as retinol, if at all possible
Cosmetics clinical research laboratory needed for dermatologic studies of cosmetics formulations to determine safety for use on human skin including age group specifications. Also required is testing to ensure that the correct percentage of preservative and PET has been used.
University researcher needs pharmaceutical microbiology laboratory for cultured streptococcus mutans research study on the biochemical properties and antibacterial action of two drugs on the microbe culture from saliva samples including glucose utilization, DNA content (increased or decreased due to the effect of these drugs) and membrane integrity of strep mutans in the culture.
Experienced pharma / nutritional supplement analytical chemistry laboratory needed for functional beverage testing for organic compound nano-particulate particle size determination, identification, and quantification of both inactive and active ingredients of two functional beverage products.
Clinical research laboratory needed for BIS compliant consumer safety study including patch test and sting test for baby wipes: 1. Sensitive skin volunteers 2. RIPT on 24 screened volunteers as per BIS 3. In use tolerance for 2 weeks (24 volunteers) Review: By Ethics Committee Principle Investigator: Dermatologist
Cosmetics and Personal Care Products Manufacturer needs laboratory for microbiology and analytical chemistry testing of disinfectants / antiseptics / sanitizers to several BS EN standards including 1275:2005, 1276, 1500:2013, 1650:2008+A1:2013, 13623:2010,13697:2015, 13704:2002, 13727:2012+A2:2015, and 14348:2005
Oncology Preclinical Contract Research Organizations CRO needed for in vivo studies of primary or metastatic hepatic / liver cancer using VX2 rabbit and/or Walker 256 rat/mouse orthotopic models. CRO must allow drug payload to be delivered by an external magnetic set up, steered by an MD/bioengineering member of our team.