Laboratory Test Requests

Spark Arrester Efficiency

Electrical Laboratory needed for testing spark arrester efficiency. View More

IEC Power Cable Connector Certification Testing

Industrial Laboratory needed for IEC testing of compression and mechanical connectors to IEC 1238-1 Test Methods & Requirements, Compression & Mechani... View More

IEC Lightning Protection Certification Testing

Company involved in the lightning protection and grounding business would like Electrical Laboratory for IEC 62561-1 Lightning protection system compo... View More

IEC Overhead Line Testing

Industrial Laboratory needed for IEC Testing of overhead lines according to IEC 61284 Overhead lines - Requirements and tests for fittings. The follow... View More

UL / CSA Marine Onboard Battery Charger Evaluation

Electrical Laboratory needed for UL and CSA Testing of marine onboard battery charger to UL 1236 Standard for Battery Chargers for Charging Engine-Sta... View More

EMERGENCY INVESTIGATION: Study of Steel Metal Towers

URGENT: Due to recent emergency storm conditions, company is seeking Laboratory immediately for investigational study of the quality of several metal... View More

IEC Lightning Protection System Components Evaluation

Electrical Laboratory needed for IEC Evaluation of Lightning protection system components (LPSC) to IEC 62561-7 Requirements for earthing enhancing co... View More

IEEE Substation Grounding Qualification

Electrical Laboratory needed for total IEEE Testing to IEEE 837-2014 IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding View More

HALT and Thermal Chamber Testing

High Tech Firm needs Laboratory with a HALT and thermal chamber to conduct ALT thermal cycling tests We require the thermal chamber to be capable of a... View More

UL Photovoltaic Testing

Third-Party Laboratory needed for UL testing of Photovoltaic panels to UL2703 Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devi... View More

Copper Cathode Safety Testing

Power company needs electrical laboratory for electrical safety testing of 300MT of copper cathode. View More

IEC surge immunity testing

Large Electrical Company needs Electrical Laboratory for IEC surge immunity testing to IEC 61000-4-5 with test levels of at least 8kV and output imped... View More

Rectifer Regulator Load

Performance Laboratory needed for testing ten 60 Amp rectifier regulators at 80% load for 2000 hours. A testing rig will need to be created to hold t... View More

Certification of On-Grid Solar Inverter

Electrical Laboratory needed for EN and IEC certification testing of on-grid solar inverter to the following specifications


1. IEC62109-1; IEC621... View More

Stress Relief Testing

Large Industrial Company needs Physical Laboratory for stress relief testing not exceeding 4% per 1000h at initial force making 70% of maximum force c... View More

Insulator Specification Compliance

URGENT Electrical Laboratory needed for compliance certification of insulator with customers insulator technical specifications that can be provided.R... View More

Transformer Certification Testing

Internationally Recognized Independent Electrical Laboratory needed for certification testing of many transformers starting from 50 KVA up to 2500 KVA... View More

URGENT Large Industrial Machinery Company needs Materials Laboratory for impact, failure analysis and identification of the cause of filtration liquid... View More

Large Power Company needs laboratory for pH and electrical conductivity testing on crushed sand. View More

Large Corporation needs experienced Electrical Laboratory needed for IEC Testing for Corona and Radio Interference Voltage (RIV) and heat Cycle testi... View More

Electrical Laboratory needed for circuit breakers testing for time-current curve characteristics View More

Power equipment manufacturer needs Analytical Chemistry Laboratory to identify and quantify the species of organic and inorganic content contained in ... View More

Electrical laboratory needed for IEC testing to the following 6 IEC Standards: IEC 61000-4-9,Electromagnetic compatibility (EMC) , IEC 60529 Degrees o... View More

URGENT Large company needs physical laboratory for environmental simulation testing of 2 pallets of products. Laboratory must have walk in environment... View More

Power company needs electrical laboratory for IP ingress protection IP69K testing. View More

Oil laboratory needed to provide certification of dielectrical insulating transformer oil to US standards. View More

Large technology company needs electrical laboratory needed for IEC fire testing of dry transformer to IEC 60076-11 F1 Fire Resistance View More

Electrical laboratory needed for electrical certification and acceptance testing of transformers, arresters, and switches including current transforme... View More

Electrical laboratory needed for IEC transformer testing of 72.5KV/145KV current transformer and voltage transformer according to IEC standard at a f... View More

Electrical Laboratory needed for IP attestation conformity testing on our Electrical Panels as per IEC 61439-1 kindly elaborate the procedure, test ... View More

Electrical laboratory needed for Ingress Protection Testing: IP tests for an outdoor enclosure
View More

Electrical company needs Laboratory needed that can certify that material shipments are checked for gamma radiation using a Ludlum model 19 Micro-R Me... View More

Certification laboratory needed for Copper and Aluminium Cable Lugs testing for UL Certification View More

ELECTRICAL CERTIFICATION LABORATORY NEEDED FOR POWER GENERATOR TESTING: EMISSION TEST, INPUT/OUTPUT TEST (WATTS - 50KVA), TORQUE/HP TESTCERTIFICATION ... View More

Electrical Laboratory needed for IES Testing of LED Light fittings to Illuminating Engineering Society
of North America (IES), LM79 Approved Metho... View More

Analytical chemistry laboratory needed to measure impurities such a CO2 and CO in hydrogen plant output gas using gas chromatography View More

Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformer... View More

Analytical Chemistry Laboratory needed for OFHC Copper powder testing for the O2 percentage View More

Materials laboratory needed for ASTM D7419-13 testing Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks... View More

India laboratory needed for solar photovoltaic module testing including mechanical testing, robustness test, metal oxide test, lead content test View More

Large corporation needs Physical Laboratory for Need bulk sample (~1,800-lb) jaw crushing of 12 x 6 dia. consolidated wet mix material (silica-alumin... View More

Electrical labroatory needed for testing and charges of Three phase Grid Tie Inverters ranging from 1, 2, 5, 10 and 20kW View More

Engineering company setting up solar power plants needs laboratory for testing newly designed earthing clamps for PV modules to UL2703 testing standar... View More

Electrical laboratory needed for UL certification testing of individual grid tie inverter which is sun1000g2 lcd . Please provide quote. View More

URGENT Large corporation needs North Carolina laboratory for Resistivity and conductivity testing. View More

Certification Laboratory needed for IEC mark testing of 220V 2000W voltage stabilizer, View More

Non-Destructive NDT Laboratory needed to provide a quote for the failure analysis of a failed CW pump bolts.

We require doing the following test... View More

Laboratory needed for petroleum testing of three petroleum based samples that require the following analyses:
Appearance (physical state, color, etc.... View More

Power and Energy company needs Saudi Arabia Industrial Hygiene laboratory for industrial hygiene monitoring sample analysis or testing.
View More

India agriculture laboratory needed for Mesh size testing or grain size testing for dried manure. View More

US Toxicology Laboratory needed for 13-Week toxicology testing of cobalt hexacyaide per NTP protocol View More

USA Analytical Laboratory needed for Developing various formulations of colloidal micelle surfactants and need testing to determine Critical Micelle C... View More

Australia and USA Energy Laboratory needed for DIN standards testing. The proper wind energy test rig will be necessary for the tests. FE8, FZG, FVA... View More

Electrical Laboratory needed for ANSI Testing to ANSI 119-4,Electric Connectors - Connectors For Use Between Aluminum-to-aluminum Or Aluminum-to-coppe... View More

Midwest USA environmental laboratory needed for ASTM Testing for Alumina (Al2O3) for clay (soil) 5 samples View More

Physical Laboratory needed for Underwriter's Lab UL fire testing to UL1709 Rapid Rise Fire Tests of Protection Materials for Structural Steel: test de... View More

Physical Laboratory needed for thermal testing: transient thermal resistance measurement from 10us to 1 s for 6 A diodes. View More

USA electrical laboratory needed for Heat Run Testing on 15KV circuit breaker bushing - 1 sample View More

Mid-West USA Analytical Chemistry Laboratory needed for water testing: TOC analysis on water with a reporting limit of 100 ppb or lower. 1 sample now... View More

Physical Laboratory needed for DIN Testing for quality and standards of cable to meet DIN 48201 standards Hard Drawn Bare tinned Copper overhear power... View More

UKAS Middle East Environmental Laboratory needed for soil analysis for potential fuel/oil contamination View More

INDIA METALLURGICAL LABORATORY NEEDED FOR COPPER PURITY TESTING OF SAMPLES (BELOW 10 nOS SAMPLES0 SUPPLIED BY US.TEST REPORT REQUIRED. View More

USA, Canada, Europe, California or Ireland Geochemistry laboratory needed for fluid testing of outlet fluids of two geothermal wells.for each well the... View More

Europe mechanical and electrical laboratory neede for EN-50483 (complete) mechanical testing and electrical testing of cable equipment for isolated LW... View More

Southeast USA Electrical Laboratory needed for Dielectric Withstand and Insulation Resistance testing to US Army Missle Specification MIS-24170J for a... View More

United Arab Emirates Physical Laboratory needed for waste wood testing to analyze the "Lower Heating Value" (lower colorific value) of waste wood and ... View More

Nuclear Certification Laboratory needed for IEC Testing to IEC standards (60861, 60768, 60761 and 60951) of radiation monitoring systems. These system... View More

California Electrical Laboratory needed for electrical testing of RF connectors for impedance, voltage rating, dielectric withstanding voltage, VSWR, ... View More

India ISO Analytical Chemistry Laboratory needed for ASTM and ISO Testing: Kauri Butenol Testing View More

USA Electrical Laboratory needed for Amperage Limit Testing:

Start with powering the connector (2-10AWG) up to 30A until the temperature on the out... View More

Canada or USA Electrical Laboratory needed for IEEE Testing : electrical tests of 600VAC 3-phase harmonic filtering product-line (up to 10 samples), r... View More

Materials Laboratory needed for water resistancy testing: vinyl coated cotton cloth type 2 class 1 per MIL-c-10799 table 4. The test result provided b... View More

Environmental labroatory needed for methanogenic activity testing View More

Ireland Electrical Laboratory needed for High Voltage Electrical testing of 20kV transformer bushing to establish electrical breakdown and check for m... View More

USA Physical Metallurgical Laboratory needed for Plating thickness Testing (Hot Tin) on a closed steel case approximate size, 2-23/32 x 1-11/32 x 27/3... View More

Middle East electrical laboratory needed for IEEE, DIN, ASTM , ISTA testing: COMPLETE Earth Resistivity Test for substation View More

Europe Electrical Laboratory needed for high power testin such as KEMA, etc.

View More

USA Materials laboratory needed for materials testing: Water Adsorption testing,
Crush Strength testing, (N)
Residual Water testing,
Particle Siz... View More

Electrical Lobaratory needed for capacitor testing a 20kvar power factor correction capacitor device under a controlled condition using motor on distr... View More

USA Toxicology laboratory needed for acute toxicity testing studies, genetic toxicity LD50 testing studies, rat or mouse; ames assay View More

galvanizing flux iron test (zinc cloride and ammoinuim cloride mixer) iron in galvanzing flux and hcl View More

India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength. ... View More

USA Electrical Laboratory needed for IEC Testing to IEC 60137 testing for air-air medium voltage bushings (electrical and mechanical). View More

Electrical laboratory needed for Outdoor single pole hook operated Disconnect Switch testing: Rating: 11 KV/ 15 KV, BIL : 110 KV, Continuous Current R... View More

Third party independent energy certification laboratory needed for certification testing of alternative heat source for various applications. product.... View More

ENERGY LABORATORY NEEDED FOR IEC TESTING LUMINARY TEST : IEC60598 with several parts. View More

Energy laboratory needed for Solar radiation testing 540-775w/sqm infrared or 40-75 w/sqm. View More

Large Multinational Corporation needs Southeast USA electrical laboratory to analayze (8) 12 inch samples of overhead crane cables analyzed to see wha... View More

Physical Laboratory needed for High Current Testing (Lightning Currents) Facilities. Could you please send me the details. Thanks in Advance. View More

India Electrical Laboratory needed for Dielectric Stength Testing for Powder Coated (350 Micron) Aluminium shield used in transformer bushing View More

Insurance company needs third party independent, accredited laboratory to test tests normally performed at that laboratory every 4 months. Water Testi... View More

Solar Panel Company needs optical laboratory to measure total reflecting efficiency of the mirror. View More

US Energy company needs USA or China analytical chemistry laboratory for reactivity testing differential scanning calorimetry of chlorosilane View More

Asia environmental laboratory needed for air quality analysis (TSP) for the on-going power plant project here in compliance with the Cambodian Minist... View More

Electrical Laboratory needed for IEC Testing of low voltage surge protective device as per IEC 61643.
View More

Power and Energy Company needs Metallurgical Laboratory for Metallurgy / Corrosion testing of #14 x 3" screws tested to determine the cause of corros... View More

Saudi Arabia construction and building, engineering laboratory needed for vibration test of a building in which Air Conditioning Equipments are operat... View More

Large electronics manufacturer needs Canada or USA Electrical Laboratory for electrical (12,000 amp, 4 cycls, 240Volt source) testing. Fixturing woul... View More

Physical Laboratory needed for ASTM testing: ASTM C110-6 Grindability of quicklime View More

Large engineering firm needs Canada metallurgical laboratory for metalurgicalde-pyritization of tailings samples (2 samples) View More

USA Physical Laboratory needed for UV water spray testing 112 minutes of UV 8 minutes of water spray for 2000 hours. ANSI B109 which references ASTM D... View More

Oil and Petroleum Analytical Chemistry Laboratory needed for Lubricity and composition testing of a sample of crude oil one sample of oil in which we ... View More

EPA Environmental Toxicology Laboratory needed for EPA OPPT Testing for pesticide registration application to EPA. Also, can you give me a general id... View More

ISO 17025 Middle East GPA2286/ASTM1945 analytical Chemistry Laboratory needed for Raw gas and HP fuel Gas for verification via Laboratory inter-compar... View More

Europe Physical Laboratory needed for UN Series 4b Explosives Testing Needing a laboratory in Europe to handle UN Series 4b Explosives Drop Testing. View More

US electrical laboratory needed for IEC testing - rubber insulating blanket testing Per IEC 61112
tests 5.5.2, 5.5.3, 5.5.4, 5.5.5, 5.8.1, 5.8.2 View More

Europe materials laboratory needed for 301 B testing View More

Thermal Laboratory needed to determine the heat of mixing (2-Drop Mixing Calorimeter)between common battery electrolyte solutions and water View More

USA, Canada Electrical Laboratory needed for testing electrical resistance, tension, diameter, and finish of aluminum wires, steel wires, and whole AC... View More

India IEC ASTM Electrical Laboratory needed for testings on our polymer insulators up to 765kV.
Include Design and Type tests as per IEC-61109,IEC-62... View More

Metallurgy Laboratory needed for metallurgical testing a bolt to determine the kind of materials it is so we can find a replacement. View More

Kuwait NAS/ISO Analytical Chemistry Laboratory needed for analysis of water and fuel oil samples as per NAS1638 or ISO 4406. View More

NE USA Physical Laboratory needed for ASME Hydrostatic burst test to ASME Section VIII, Div. 1, UG-101, of multiple aluminum valves, flanges, and pipe... View More

India Analytical Chemistry Laboratory needed for SEM, EDX, XRD, AAS TEM testing. View More

IEC/ISO Electrical Laboratory needed to test and certify a High Voltage Cable Test Van fully equipped with testing instruments for high voltage cable ... View More

Eastern USA Mechanical IEC Electrical Laboratory needed for ASTM testing on fiberglass sticks used by the utility industry in accordance to IEC60855-... View More

Colorado Analytical Chemistry Laboratory needed for ASTM testing Carbon Residue to ASTM D4530. View More

Large electrical mfg needs Brazil Electrical Laboratory for IEC Lightning protection system testing for wind blades. Test to include high voltage atta... View More

Analytical Chemistry Laboratory needed for physicochemical testing on one sample(water soluble oxo compound) for:
UN Self-heating solid - basket test... View More

Analytical Chemistry Laboratory needed for ARAFFF foam concentrate testing for the parameteres like ph value,foam expanison co-efficent,refractive ind... View More

Colorado Analytical Chemistry Laboratory needed for ASTM testing Carbon Residue to ASTM D4530. View More

Mumbai, India Electrical Laboratory needed for testing radiation from Mobile tower View More

IEC Electrical Laboratory needed for IEC Capacitor testing Aging portion of IEC 60831 for 5 samples each:
80uF 750VAC Film Capacitor
41uF 900VAC Fil... View More

USA/Europe IEC Electrical Laboratory needed for IEC testing to IEC 61643-11 standard or equivalent to get the test report / certificate for the Ref. View More

USA Electrical Laboratory needed for testing the kilowatt drop after installed energy saving device. View More

Dallas ISO, US EPA Materials Laboratory needed for ASTM Testing reactor, waste and other related parameters. Our company designs, manufactures and sup... View More

India Mechanical Laboratory needed to test our newly designed residential generator silencer. View More

California Bay Area Optical Laboratory needed for testing reflectivity measurements on flat, solid samples using a spectrophotometer (such as Cary 500... View More

Analytical Chemistry Food Laboratory needed to test a sample of Veterinary Food (used to give race horses more power and energy) to determine composit... View More

MIDWEST USA MECHANICAL LABORATORY NEEDED TO PERFORM UTILITY UNDERGROUND VAULT COVER VERTICAL LOAD TEST. TIER 15, the vertical (test load = 22,500 pou... View More

India MIL Environmental Testing Laboratory needed for EMI/EMC testing, vibration testing, pressure chamber testing, shock testing as per MIL 810 stand... View More

ASTM Materials Laboratory needed for testing the Neutron absorption capacity of the reaction bonded boron carbide plates as per ASTM C992. View More

India Mechanical Laboratory needed for snow load testing on approx shelter size 4700 L X 2500 W X 2250 H as per As per JSS0256, table No.8 Standards. View More

ANSI Electrical Laboratory needed to run the following ANSI tests:
Lumen Output
Run time on one set of batteries
Beam Distance
Impact Resistance
... View More

USA Analytical Chemistry Laboratory needed for testing identification of trace quantities of apparent hydrocarbons (C2 to C9). We need to identify wh... View More

China NFC Laboratory needed for outdoor weathering test for Aerial Bundled Cables as per NFC 33-209 View More

Analytical Chemistry Laboratory needed for testing in accordance to ASTM:
1) Autoignition temperature of liquid chemicals
2) Flammability test View More

Europe ASTM/ISO Laboratory needed to test various fuels for REACH compliance certificate. View More

ASTM Materials Laboratory needed for testing the Neutron absorption capacity along the cross section area as per ASTM C992 of the Reaction bonded boro... View More

Taiwan Mechanical Laboratory needed for vibration testing. View More

Pasedena, California ASTM Laboratory needed to determine Dew Point of Natural Gas according to ASTM Method D1142. Hydrocarbon and water dew points can... View More

U.S. ANAS/ISO Laboratory needed for ISO and ANAS N43.8 testing Nuclear Density Level Gauge for regulation registration of the device according ANAS N4... View More

Europe MIL Laboratory needed for CS101 CS114 CS115 CS116 and RS103 test according to MIL-STD-461E,
4 inert rocket motor samples. View More

Toronto Analytical Chemistry Laboratory needed for titration testing of zinc napthenate from tapes. View More

India ISO or BS Laboratory needed for polyurethane testing Percentage(%) of Closed cell content of polyurethane foam View More

Eastern USA SAE Laboratory required for Photometric and FMVSS SAE.P2 and PC testing according to DOT requirements, 2 sample each. View More

USA ASTM Laboratory needed for vibration test, incline test, static compression, mechanical compresion, etc in accordance to ASTM D999, ASTM D880 for ... View More

India IS Electrical Laboratory required for testing one each of 1.25mm and 1.65mm double paper covered aluminium wire as per 6162 (PT I)-1971 View More

USA Physical Laboratory required for ASTM D 3349 testing on black PVC jackets on completed cable- shall have a minimum absorption coefficient of 280 w... View More

Analytical Chemistry Laboratory capable of doing fuel analysis and NCV testing for HFO is required by Electricity generating plants, diesel power plan... View More

US Coolant Nuclear Power Plant needs radiochemisty laboratory for ANSI testing: ANSI N4.5.5 sodium tetraborate and boric acid boron 10 isotopic analys... View More

Physical Laboratory needed or testing turbine oils for approval that oil suitable for our turbine. we use shell oils but shell company stop business i... View More

Canada or US laboratory to confirm that a 4 foot fluorescent light fixture will stay lit at -50c. View More

China ETL laboratory to assist in application for ETL certification for lighting products. View More

West Coast laboratory to test a "lightning counter" device by sending a pulse to review the performance of the device. The pulse must past trough the ... View More

Electrical Laboratory needed for IEEE and UL Testing, Temperature Rise test on distribution transformer View More

Pune NABL Accredited Electrical Laboratory
needed for IS-1651 testing of Industrial batteries as per IS 1651 from NABL accredited Lab.



Kind... View More

USA Electrical Laboratory needed for MIL-STD Testing, Corona Test Per MIL-STD 19500/465 4.4.3
Our test limits are 17.5kVRMS Limit: no more than 5 pi... View More

Pennsylvania Analytical Chemistry Laboratory needed for ASTM D4891-89 BTU heat content testing and sulfur content testing (%/volume, etc.) View More

NY Electrical Laboratory needed for testing 3 legs 15kv cable hi pot tested and one 15 kv transformer meggered tested. View More

Packaging Laboratory needed for Group 1 Haz Mat testing. Lithium-ion battery. UN 3480. Battery weight is 100 lbs. WIll be packed in a wooden crate. ... View More

Electrical Laboratory needed for electronics testing specifications as follows Pressure, LP2A00 Pressure transducer, jumper selectable ranges of +/-0.... View More

Power and Energy Company needs physical laboratory for testing octane level E-10 gasoline View More

China Analytical Laboratory needed for EN 1563 mechanical testing such as brinell hardness, tensile, yield strength, elongation, chary values, and mic... View More

Western US Electrical Certification Laboratory needed for IEC ATEX EEx Testing enclosure containing electronics for EEx-d explosion proof rating View More

USA Nanotechnology laboratory needed for microtome samples: 0.5-5um thick cross sections of electrode material(graphite,Cu Foil,PVDF). View More

Eastern USA Transporation Laboratory needed for Transportation Simulation Testing, Package Testing
Salt, Fog & Cyclic Corrosion Testing
Temperature ... View More

GMP Forensics Laboratory needed for Toxicology Testing of soot and residue from a burned out power unit to identify hazardous contaminants. (e.g. PAHs... View More

USA NELAP Environmental Laboratory needed for Analysis of US EPA Method 0010 by SW-846 Method 8270D for semivolatiles View More

Thailand Electrical Laboratory needed for SASO Electrical Metallic Tubing (EMT) Conduit as per Saudi Arabian Standards Organization (SASO) Standards. View More

PA, DE or NJ metallurgical, analytical chemistry laboratory needed for low level Fe, CU analysis on power plant condensate. 50 samples of condensate t... View More

A2LA Metallurgial Laboratory needed for Quantitative Depth Profile of Carburized Nickel View More

ASIA PHYSICAL LABORATORY NEEDED FOR ASTM EDDY-CURRENT TESTING OF CONDENSER AND LOW PRESSURE/HIGH PRESSURE HEATERS OF POWER PLANT View More

India, China Mechanical Laboratory required to do stress rupture test (creep test) View More

India Materials Laboratory needed for acoustic noise testing with noise level upto 170dB View More

Asia NFC 33-209 Mechanical Laboratory required for Wearablity test for Aerial Bundled Cables as per NFC 33-209 View More

IEC 61215 & IEC 61730 Electrical Laboratory required- We are the manufacturing of Solar PV modules situated near Bangalore. We would like to have IEC ... View More

Russia, St. Petursburg or Moscow Analytical Chemistry and Mechanical Laboratory needed for the following testing:
Chemical - C, Si, Mn, Cr, Ni, Cu, S... View More

NFC 33-209 UV Laboratory required for Xenon arc uv weathering for LV cable View More

Mechanical or Materials Laboratory required to do solar module mechanical load testing. View More

Florida Electrical Laboratory needed for On-site testing and verification, from pre-selected commercial customers, on a small power capacitor device, ... View More

Geology laboratory needed for rock testing: Cerchar Abrasivity, Taber Abrasivity, Specific Energy, Drillability Index, Blasting Index In addition to t... View More

Analytical Chemistry Laboratory needed for testing composition of electrolyte that using in lithium battery, this electrolyte include 7 organic mater... View More

USA, Asia, or EU Laboratory needed for testing the wavelength of 2940nm of Er:YAG laser system View More

ISO 17025 USA, Asia, or EU Materials Laboratory needed for testing 2940 nm of Er:YAG laser system. View More

Physics Laboratory needed for testing Er:YAG laser 4290nm. View More

Physical Laboratory needed to test coating to measure total solar reflectance from the coating.
address: View More

Spain Physical Laboratory needed for testing solar concentrator mirror designed for a parabolic trough solar concentrator View More

USA Materials Laboratory needed for ASTM Testing of NGL: GC C1 to C6+ and CO2, N2 of NGL at 1000 psig View More

Maryland or New Jersey Electrical Laboratory needed for electrical conductivity of CNT (Carbon NanoTube) infused fiber/cable. Current capacity shall b... View More

Los Angelas Electrical Laboratory needed for table lamp testing; Shorts out when used with a CFL type lamp. View More

USA Analytical Chemistry, Mechancial Laboratory needed for temperature, frequency, and strain testing of 600,000 cSt silicone fluid. One sample is ne... View More

Texas Electrical Laboratory needed for new product testing. I am looking to test a device that is 'stand alone' and is currently being developed that ... View More

JEDEC 51-2 Electrical Laboratory required for testing Thermal Resistance of Heat Sinks. The objective is to benchmark the thermal performance of our ... View More

Germany Metallurgical Laboratory required for testing physical and chemical properties of the cupro Nickle tubes. View More

Thailand IEC 60068-2-5 Environmental Laboratory needed to test according to IEC 60068-2-5 ( solar radiation test) for electronic meter outdoor type as... View More

Midwest USA ASTM 159-83, DIN 1686-2, and 1685-1 and EN1563:1997 Mechanical/Analytical Laboratory needed for testing Gray(class 2500-3500)and Ductile i... View More

Eastern Europe, China, Asia Electrical Testing Laboratory needed for 110 Kv impulse testing, Partial discharge short circuit 11 kv. View More

California Electrical Testing Laboratory needed for conductivity testing for a fire-retardent for power poles. View More

Europe Electrical laboratory needed for RoHS Testing to IEC 62321, ICP-OES test rohs View More

India IEC 68-2-5 Solar Radiation Testing Laboratory required to test a panel of our reflector for solar radiation severity of 360 btu/h/ft^2 and confo... View More

USA Materials Testing Laboratory needed for ASTM Weathering Testing for Operating Xenon Arc light apparatus for exposure of non-metallic materials, in... View More

Florida Electrical Testing laboratory needed for AC current handling and frequency bandpass. View More

USA Materials Laboratory needed for Solar Radiation test per MIL-STD 810F, Method 505.4, Procedure I and Procedure II. View More

USA Physical Laboratory needed for flammability testing, IEC 60076-11 page 57, section 28 Fire Behaviour Test (special test). We need to have a 350 kV... View More

USA Oil and Petroleum Laboratory needed for 46 Transformer oil testing, DGA and D-877, to provide Dielectric Breakdown of the oil, and DGA to provide ... View More

China ISO certified geotechnical laboratory forvarious ASTM geotechnical testing on the rock and coal samples.



Tests include brazilian, shear... View More

Metallurgical laboratory needed for analysis of scrapings from porcelan bushings which is believed to be anticorrosive chemical blown from a nearby st... View More

USA Analytical Chemistry Laboratory needed for extended analysis (C1-C20) of flash gas from pressurized sample of produced water.
Extended analysis a... View More

Illinois Analytical Chemistry Laboratory needed for Analytical testing on Flue Gas Desulphurization slurries including sulfite, sulfate, carbonate, Ca... View More

North American lab needed for electrical testing of Sandwich solar panels for insulation "R" values. Will supply 2 insulated sandwich panels and requ... View More

Analytical Chemistry Lab needed for determination of properties of phosphoric acid at ~160C. Properties of interest include viscosity, others. View More

Analytical Chemistry Laboratory needed for Chemical analysis and thermal analysis:
- Nitrate content;
- Chloride content;
- Nitrite content;
- Car... View More

Electrical laboratory needed to conduct motor loaded tests of medium voltage motor drive products
 Power Paragon will provide drive in the 5000 kW t... View More

Electrical Mechanical laboratory needed for energy testing as a verification process. We are a small company called Gravity Energy Development SA base... View More

Electrical laboratory needed to test one of our underground power lines that have failed. We would like to test it for hydrocarbons to see if they we... View More

Electrical laboratory needed to test for electric conductivity and electrorheological properties of fiber films that will be used for the energy stora... View More

Analytical Chemistry needed to test power transformer for complete oil tests and analysis View More

Physical laboratory needed for testing Concentrating Solar Sun Tracker. View More

Analytical Chemistry laboratory needed to test our design for concentrating solar tracking - how much improvement there is to the PV under the sun. Be... View More

Electrical laboratory needed for energy test rating as per Australian standards View More

Electrical laboratory needed for dielectric breakdown test -applying 15,000 volts direct current with breakdown. The mmaterial is protective caps for ... View More

Electrical Laboratory needed for inrush current test on 300KVA transformer 1700 lbs 33" x 32" x 20"

1.0 Inrush Current
1.1 Objective is to verify ... View More

Electrical laboratory needed for validation of energy achieved testing for Self-Sustaining Energy Process

Supplies needed:

- Hydrogen (gas)
- ... View More

Environmental laboratory needed for btu content testing of paper sludge View More

Electrical Laboratory needed for measuring the power consumption of equipment under various operating conditions and arrangements. Provide independen... View More

Utility Company needs physical laboratory for UL and ANSI testing of electrical meter sockets to determine whether they meet the qualifying specs as ... View More

Analytical Chemistry Laboratory needed for testing total sulfur and chloride analysis on solid samples as requested on our written P.O. form. View More

Electrical laboratory needed for testing the power consumption of applicances connected to power bar. Please advise how we can arrange such a test an... View More

Physical laboratory needed for IEC and UL Testing (IEC 61215, Flat-Plate Photovoltaic Modules and Panels and UL 1703) of solar panels View More

Electronics laboratory needed for Solar Radiation Testing simulation per IEC60068-2-5 procedure A,on cell phone chargers and adaptors:
8 hours at +55... View More

Energy company needs analytical chemistry laboratory for testing sulfate, chloride, and total organic carbon. I need the sulfate and chloride tests to... View More