coatings and films Laboratory Testing Requests

Contract Laboratory needed for JIS testing of a paint film sample against coronavirus according to JISZ2801

MULTIPLE PRODUCTS
MULTIPLE TESTS
Contract Laboratory needed for antimicrobial and antiviral effectiveness testing of polyester adhesive films on a variety of hard surfaces s...

EUROPE, ASIA OR USA LABORATORY
URGENT
Chemical Company developing anti-microbial film needs ISO/IEC 17025 Accredited Microbiology Laboratory for ISO 21702 antiviral effect...

Contract Laboratory needed for ISO antiviral properties testing on the plastic films.
preferably anything similar to ISO
ISO21702 film testing
ISO18184 fabric testing

Microbiology Laboratory needed for ISO 21702 and ISO 18184 anti-virus activity and efficacy testing of anti-microbial copper film used on
surface areas such as door knobs, e...

Contract Laboratory needed for anti-viral effectiveness testing of film coating to determine if they are anti-virucidals.

Life Sciences Company needs Bioanalytical Laboratory needed that can test and confirm presence of RNase and DNase enzymes in a sample laminate material (ie. plastic film)

Microbiology Laboratory needed for JIS anti-viral efficacy test on new paint coating on PE film according JIS-Z 2801 for inhibition to the growth of viruses such as Coxsackiev...

LONG TERM TESTING. Materials laboratory needed for thermal imaging of coating for reflectivity tests to extract emissivity number using a diffuse gold standard. Coating is use...

Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements

Metallurgical laboratory needed for micro structure study of differing layers of zinc on zinc-coated reinforced bars (re bars).

Medical Device (Optics) laboratory needed for analytical chemistry testing of potential contaminants in a product coating liquid via NMR and FTIR. GC/MS may also be necessary...

Materials (textiles) laboratory needed for protective clothing testing to check the cut resistance of protective textiles to ASTM 2992 or F1790 using TDM 100 cut machine.

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Wate...

Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 P...

Materials Laboratory needed for AASHTO testing of Architectural coating Material to
Chloride penetration test (AASHTO T259, T260)
Rapid chloride Permeability AASHTO T277 ...

Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7
2. Liquid water permeability: Test method EN-1062-7
3. Acid Resistance . 4. SRI (solar...

Environmental Simulation Laboratory needed for paint plastic cans testing for 28 days at stacked conditions to simulate summer test simulation
at day time 45 to 48 degree c,...

Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, Ghost, Halo (ISO 9358-199...

Coatings company needs materials laboratory for DIN rubber coatings testing to DIN 53 504 Tensile strength test, DIN 53 507 Tearing resistant test and DIN 53 516 Abrasi...

Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ASTM B695, ASTM B571, and...

FDA 175.300 and ISO 17025 accredited laboratory needed to test polymeric coating samples for repeat use with food contact, in order to use it to line food processing tanks and...

Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint. Testing to ASTM E1975, ...

Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials

Analytical Chemistry Laboratory needed for polyurea powder testing for residual formaldehyde:

Medical Device Manufacturer needs laboratory for cleanliness testing of medical electrodes.

Environmental laboratory needed for OECD Testing: Biodegradability testing of natural wax particles.

Laboratory needed for Fire rating testing to NFPA 701, NFPA 705, German fire code, Australian fire code, and UK fire code.
Material is a nylon mesh material used in a perform...

Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 standard fo Performance Req...

Laboratory needed for DOT Testing to ISO Standards: (i) Viscosity test. The flow time in seconds is determined at 23 °C (73.4 °F) using the ISO standard cup with a 4 mm (0.16 ...

Materials laboratory needed for ASTM plastic film testing of Natural fibers enriched plastic films for packaging application

Materials Laboratory needed for Material characterization of metal with Polymer thinfilm
- Mechanical properties characterization of flat thin steel (0.1 x 5 x 30mm)
- Mecha...

Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on various polymers, including...

Materials laboratory needed for analysis of particulate formation in natural oil wood finishes. We are having some particulates forming that we need to determine what is happe...

Environmental Microbiology Laboratory needed for algae MIC testing on blend of two biocidal compounds (both are fairly water insoluble powders). The MIC testing has to be con...

Materials laboratory needed for ASTM Testing of novel paint composition of anti repellent activity.

Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the Hiding Power of Powder Coa...

Large automotive supplier needs materials laboratory for physical testing on painted plastic such as the DuPont Impact test and Traverse Abrasion plus many more.

Microbiology laboratory needed for anti-algae testing for Foul Release system

Materials Laboratory needed for engineering evaluation of a wall coating

Materials laboratory needed for ASTM proficiency testing for Linear Thermal Shrinkage of Plastics as per ASTM D 1204, Standard Test Method for Linear Dimensional Changes of No...

Materials Laboratory needed to measure the optical transmittance of a ceramic thin film in the range 200 - 800nm.

Metallurgical laboratory needed for Caustic soda testing on metals coatings.

LONG-TERM TESTING Materials laboratory needed for shear strength testing of an adhesive as per Federal Specification MMM-A-181D.Shear strength by tension loading340 lbs/in2 ...

MATERIALS LABORATORY NEEDED FOR EPOXY TESTING TO SPECIFICATION REQUIRMENTS

Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break
2) Modulus of Elast...

Flooring Company needs Performance Laboratory for water resistance testing of Cement self leveling products.Product is a topical sealant to apply to some of our cement based s...

Europe Materials Laboratory needed for Paint film performance tests on mild steel panels
Sr No Test
1 Salt Spray Test (504 hours)
2 Humidity Resistance (504 hours)
3 Penci...