Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
We are looking for an FDA-registered lab for xanthan gum testing, specifically the Assay test using USP <311> (Alginates Assay).
Need to test the boiling point of a chemical via ASTM D5399 (Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography).
Interested to evaluate a product's efficacy against bed bugs. Kindly quote the relevant details: cost, methodology / standard adopted, sample quantity required, turnaround tim...
MULTIPLE SAMPLES
We require HPLC-RID (refractive index detection) testing for sugar analysis from epoxypolysaccharide. Looking for a lab in India.
Would like a paint chip analyzed for Bisphenol A (BPA) and possibly related monomers, such as Bispehnol S (BPS).
Looking for a facility to perform ASTM D5399 for one sample.
(ASTM D5399: Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatog...
We need LD50 toxicity testing of venom samples.
We need a water sample tested for phenol (%), flash point, and pH.
Need analysis of Formaldehyde in a consumer hair care product..
MULTIPLE TESTING & SAMPLES
We are looking for a chemistry/synthesis lab that can develop and create prototype membranes that have fluorescent properties that are ...
Need a Canadian expert to confirm false positives of ICP-MS - we need to investigate the discrepancy in detecting the presence of aluminum in our products.
We need eith...
MULTIPLE TESTING & SAMPLES
We're investigating how different surfactants influence the solubility of the insecticide clothianidin in water and ethanol. We've alre...
We require the molecular weight (MW) for Sodium Hyaluronate (Purity 93%) with a MW range between 1.5×106 Da–1.8×106 Da. We'll need the MW using the Ph. E...
MULTIPLE TESTING
Need ASTM D5127-13 compliance testing of our ultra-pure water system per Type E1-3 standards.
We would appreciate it if a UK or US laboratory coul...
Need a US laboratory to evaluate the combustibility of a known commercial surfactant granule that's milled to a smaller particle size.
Need to complete LD50 and LC50 on one of our products for FMCSA compliance. Is this something you do?
A recently purchased bottle of Fenbendazole dewormer liquid suspension smells like acetone. Would like to test for contamination with some harmful chemical.
MULTIPLE TESTING
We are developing an innovative chemical textile recycling technology for poly-cotton textile waste, primarily. We require the following R&D supp...
MULTIPLE SAMPLES
Looking for Solar reflectance (SRI) testing of polymer formulation-sprayed hardscape materials per ASTM C1549 Standards (Determination of Solar Refle...
BUDGET APPROVED ($1,000-$2,000)
Need a US contract laboratory for efficacy testing of a natural insect repellent product. There would need to be materials and methods...
Require testing a single sample for harmful chemicals/volatile organic compounds (VOCs), and produce a detailed report.
We need a substance purported to be 9-Methyl-β-carboline (9-Me-BC) analyzed for authenticity and impurities. Looking for an Australia-based laboratory.
MULTIPLE TESTING
BUDGET APPROVED ($1,000-$2,000$)
Require laboratory testing in the USA to determine the bromine index in an inorganic absorbent, following ASTM...
Looking to test an aqueous distillate using Differential Scanning Calorimetry with Mass Spectrometry (DSC-MS).
MULTIPLE TESTING & SAMPLES
LONG TERM
A mining R&D start-up laboratory requires organic acid measurement (HPLC)in the end-of-experiment fermentation brot...
We're building a bioreactor and would like to investigate encapsulating Ru-complex for optical dissolved oxygen sensors as demonstrated in this paper: https://doi.org/10.10...
MULTIPLE TESTING & SAMPLES
We would like to assess the behavior of aluminum chloride basic, aluminum sulfate, aluminum chlorohydrate, and aluminum chloride hydrox...
LONG TERM
We have a requirement for Nickel testing in Sodium Hydroxide Raw material by Ph. Eur. general chapter 2.2.58 (Inductively Coupled Plasma-Mass Spectrometry)....
We are looking for deformulation to obtain a detailed ingredient breakdown, including percentages, for a nail-strengthening remover formula.
Could you please provide the f...
We're conducting an efficacy study on a chicken plant. We need an order of buffered peptone water (bird rinse) - 400 mL bottles.
Would like to get tested for unidentified exposure to pest control chemicals.
LONG TERM
Looking for a lab that can run LCMS on a biosurfactant on bio-inert equipment (not just acid-passivated). Our current instrument is not producing results we...
I am looking to measure vapor pressure of a paint remover. It is a mixture of approximately benzyl alcohol, water, and hydrogen peroxide. I expect it will fall in the magnitu...
We need to determine the Zeta potential testing for our adsorbent phosphoric acid-treated coconut coir dust. Philippines/Asia laboratory preferred.
MULTIPLE SAMPLES
LONG TERM
Analytical laboratory needed for psilocybin content testing of freshly dried Psilocybe cubensis samples. We'll send in mu...
We are looking for a lab that can help experimentally determine the vapor pressure of a few alkali salts between the temperature ranges of 750°C and 1950°C.
Need to determine the composition of a byproduct from a glycol-based printing system with a heated dryer.
MULTIPLE TESTING & SAMPLES
LONG-TERM
Contract laboratory needed for Bed bug repellency and mortality tests (Cimex lectularius or Cimex hemipterus<...
MULTIPLE TESTING
LITHUANIA / EUROPE ISO 17025 Analytical chemistry laboratory needed for identity and purity testing organic compound and issuing a certificate of ana...
MULTIPLE TESTING
Contract laboratory needed for testing insect repellents for the following:
- Ant Testing
Guidance: BPR Volume II, Parts B+C, Version 6.0, A...
MULTIPLE TESTING
Bioanalytical laboratory needed for testing agrichemical containing 12% horseradish oil. Following are the tests we need:
- organic matter
Consumer products laboratory needed for SAE / AMS compliance testing air freshener liquid and a 3-1 spray with AMS1478B (Deodorizer, Aircraft, Deactant-Type Aerosol Packaged) ...
MULTIPLE SAMPLES
BUDGET APPROVED( $1,000-$2,000)
USA Analytical biochemistry laboratory needed for HPLC testing liquid spent medium from Hericium fungal cu...
MULTIPLE TESTING
Industrial Company needs Analytical Chemistry Laboratory for Uric Acid Analysis
Contract Laboratory needed for chemical analysis of chemical detergent product to determine the product formula and provide the product components (ingredient) along with per...
MULTIPLE TESTING
Third-Party Analytical Chemistry Laboratory needed for solubility limit and enthalpy of solution of ammonia borane in liquid ammonia. Also determine the dens...
Bioanalytical Laboratory needed for MALDI-TOF spectrometry of two organic samples. Our objective is to investigate the aggregation of the compounds to determine if supramolecu...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests