Laboratory Outsourcing and Scientific Sourcing Center

MULTIPLE SAMPLES

I synthesize polymers with alkene bonds in the backbone and then add thiol ligands to those alkene bonds in varying ratios. I need to determine the a...

MULTIPLE TESTING & PRODUCTS

LONG TERM

BUDGET APPROVED ($25,000-$50,000)

I need a certified lab to verify my chemical inventory's compliance with their res...

Looking for a laboratory that can make PVC dry blends on lab-scale for different applications. Need one laboratory in Europe and one in the USA.

MULTIPLE TESTING

We’re working on a long-term medical implant and need expertise in material characterization and process development. We’re investigating non-invasiv...

MULTIPLE TESTING

Interested in following analysis on pre-siliconized PET 23 micron Liner sample:

1. Silicon coat weight
   
2. Quality of Silicon laydown
   Accepting Quotes

MULTIPLE SAMPLES

Looking for Solar reflectance (SRI) testing of polymer formulation-sprayed hardscape materials per ASTM C1549 Standards (Determination of Solar Refle...

MULTIPLE SAMPLES & TESTING

LONG TERM

Looking to outsource exposing a polymer material to various chemical environments. We are a small team with minimal EHS...

BUDGET APPROVED ($1,000-$2,000)

Expert laboratory needed for Atomic Force Microscopy (AFM) on soft polymer samples.

Need certified polycarbonate (PC) and polyethersulphone (PES) calibration kits for Dynamic Mechanical Analysis (DMA). Do you sell such products?

MULTIPLE TESTING & SAMPLES

Need to test surface roughness, microhardness, and color stability of different composite resins. India-based lab needed.

Kindly quote your best price for material testing of Polytetrafluoroethylene (PTFE) gasket samples (Used and New) to confirm that the material is PTFE.
Please submit your pro...

Technical assistance needed for synthesis/polymerization inhibition of the Magnesium Acrylate monomer, 2-hydroxyethyl methacrylate (HEMA)-based products, and some Polyurethane...

URGENT

MULTIPLE SAMPLES

USA Polymer Laboratory needed for Polyethylene repro pellets testing tested for substances of very high concern SVHC list of

Reach...

URGENT

MULTIPLE TESTING

INDIA Biomedical polymer research facility needed for mechanical testing of a polymer-based bone scaffold composite material made of pol...

MULTIPLE PRODUCTS
CALIFORNIA / USA Material testing laboratory needed for outgas analysis of epoxy adhesive per ASTM E595-15 (Standard Test Method for Total Mass Loss and Col...

URGENT
LONG-TERM
MASSACHUSETTS / USA Plastic and polymer testing laboratory needed for Oxygen Transmission Rate (OTR) testing 3D printer plastic films according to ASTM D398...

MULTIPLE SAMPLES
Contract polymer testing lab needed for intrinsic viscosity (IV) testing for three samples of PET (polyethylene terephthalate) regrind flakes.
Could you ki...

URGENT
USA: Very low viscosity non-conductive eclectic resin or glue is needed to use on magnet material to isolate approximately 20 microns of rough surface.

MULTIPLE TESTING & SAMPLES
EUROPE / FRANCE contract lab needed to test Ultra-High Molecular Weight Polyethylene (UHMWPE) powder and molded forms according to ISO 5834-1:2019 ...

Textiles and material testing laboratory needed to determine the content of various fabrics and polyester material in a microfiber towel used for car drying.
How to proceed a...

Third-party testing facility or consultant needed to advise about PFAS regulations in California/USA.
We deliver items (like deco items, christmas trees etc.) to California/U...

Polymer testing laboratory needed to perform melt flow rate (MFR) testing for a polystyrene resin per the ASTM test standards.

Large Corporation needs USA ISO 17025 Contract Laboratories specializing in size exclusion chromatography with multi-angle light scattering (SEC-MALS) testing needed to analyz...

Accredited laboratory needed to perform ASTM tensile, compression, and shear testing of composite plastic materials used in wind energy industry per the ASTM test standards.

Independent testing facility needed to test Granular Virgin PTFE Resin/ Sheet sample for 3-A Sanitary Standard (SSI) for Multiple-Use Plastic Materials. Test will cover;
a) ...

Contract laboratory needed for testing two wood polymer adhesive peel and sheet samples per the ASTM test standards.

Food company needs ISO-17025 accredited laboratory to perform plastic (PFAS), allergen, environmental pathogen, aflatoxin, etc., testing.

MULTIPLE TESTING
Large Corporation needs Polymer Laboratory for ASTM tensile strength, elongation-at-break and modulus testing of 80 dumbbell elastomer specimens under TS297...

Polymer Laboratory needed for SEC-MALS testing for degree of branching of synthetic polymer by SEC-MALS

Large Corporation needs Contract Laboratory for flashpoint testing of acrylic polymer dissolved in butyl acetate.

URGENT
LONG TERM TESTING ...

NORTH AMERICAN LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for certification testing of inflatable boat material as per ISO 15372 (Ships and marine technology -...

MULTIPLE TESTING
Consumer Products Safety Laboratory needed for safety and toxicity testing of glow-in-the-dark cured resin product l used in 'decor art' products, targeted t...

MULTIPLE PRODUCTS
MULTIPLE TESTING
Polymer Laboratory needed for Acetaldehyde and limonene analysis of recycled rPET resin (pellet) including Migration (SMl and OML), deco...

ASIA LABORATORY (VN/KH preferred)
MULTIPLE TESTING
Polymer Laboratory needed for Polyethylene terephthalate (PET) Flakes testing. Please let me know whether you can do the t...

Large company needs Polymer Laboratory for Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) block or cutting board cut resistance testing.

Polymer Laboratory needed for mechanical quality testing of injection molded polyolefin foams.

MULTIPLE PRODUCTS
Large Company needs Analytical Laboratory for oil products testing for percent of bromine index and aliphatic unsaturation (amount of double bonds) in total...

MULTIPLE TESTING
Contract Laboratory needed for testing Luxury Vinyl Tile (LVT) flooring product for dimensional stability, planar imbalance, and plasticizer imbalance.

L...

MULTIPLE TESTING
USA Polymer Laboratory needed for testing biodegradability of plastic sheeting according to ASTM D5526 standards.

CONSULTING
MULTIPLE TESTING
Contract Laboratory needed for testing a product line of organosiloxanes - designed to improve impact modification, appearance, adhesion, and wat...

USA LABORATORY (Houston, TX)
Contract Laboratory needed for testing small scale rubber mixing (50-100 gms). What will be the charge per mixing?

MULTIPLE TESTING
Polymer Laboratory needed for testing plastic material and quantifying amounts of monomers in oligomers, such as HEMA, 2-EHA, TMDI, and IPDI.

Thank you,

MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for testing resin products to confirm if it is indeed classified as marine pollutant as Class 9 environmentally...

URGENT TESTING
USA Medical Device Laboratory needed for testing a polymeric material for softening point via the Mettler Cup-and-Ball Method. Please advise what contract labs...

MULTIPLE PRODUCTS
MULTIPLE TESTING
Polymer Laboratory needed for testing polyurethane materials for chemical content and potential of hazardous materials. We want to ensure ...

MULTIPLE PRODUCTS
Polymer Laboratory needed for testing for hydroxyl value for 2 resin materials. Would like to get a price and estimation of time.

URGENT TESTING
Medical Device Laboratory needed for testing for a polymeric compound. Specifically, a softening point test using ASTM D3461 with Mettler Cup and Ball and quan...