Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
MULTIPLE TESTING & PRODUCTS
LONG TERM
BUDGET APPROVED ($25,000-$50,000)
I need a certified lab to verify my chemical inventory's compliance with their res...
MULTIPLE TESTING
We’re working on a long-term medical implant and need expertise in material characterization and process development. We’re investigating non-invasiv...
Hi, We are a startup building a B2B recycled plastics trading and supply chain platform.
PCR sample testing against performance KPIs (IV, MFI, Izod, Flex modulus, other AS...
Contract Laboratory needed for Rubber Hose Pressure Cycle Testing for 100,000 Cycles. The Rubber Hose has multiple bends
MULTIPLE PRODUCTS
Contract Laboratory needed for identification of the molecular structure of EPDM rubber gasket material that was used on the railcar hatch pla...
USA Polymer Laboratory needed for 21 CFR 177.2600 compliance testing of cured silicone rubber samples.
Can you provide a quote and turnaround time?
Thanks!
URGENT
LONG-TERM
MASSACHUSETTS / USA Plastic and polymer testing laboratory needed for Oxygen Transmission Rate (OTR) testing 3D printer plastic films according to ASTM D398...
Contract plastic testing facility needed for near-infrared (NIR) analysis of plastic recyclables. We also need to know the cost of persistent organic pollutants (POPs) analysi...
URGENT
Independent material testing facility needed to test a 316L (low carbon) stainless steel dowel pin for the presence of natural rubber latex, per ASTM D6499 (Standard T...
MULTIPLE PRODUCTS
Contract laboratory needed for mixing and preparing the following silicone polymers for optimal quality silicone in parts per hundred resin/rubber (PHR):
...
URGENT
USA Material testing laboratory needed for individual testing sieve residue using ASTM method D1514 for recycled recovered carbon black (rCB) pellets.
Material testing facility needed for testing Dissolved organic carbon (DOC) in rubber granules per the NF EN 1484 method (Water analysis - Guidelines for the determination of ...
Consumer products testing laboratory needed for testing ISO 19671:2018 standard: Additional lubricants for male natural rubber latex condoms - Effect on condom strength.
Can...
Contract Laboratory needed for Granular Virgin PTFE Resin/ Sheet testing to 3-A Sanitary Standard for Multiple-Use Plastic Materials Test.
Test will cover:
a) Cleanability R...
Third-party testing facility or consultant needed to advise about PFAS regulations in California/USA.
We deliver items (like deco items, christmas trees etc.) to California/U...
Polymer testing laboratory needed to perform melt flow rate (MFR) testing for a polystyrene resin per the ASTM test standards.
Accredited laboratory needed to perform ASTM tensile, compression, and shear testing of composite plastic materials used in wind energy industry per the ASTM test standards.
Independent testing facility needed to test Granular Virgin PTFE Resin/ Sheet sample for 3-A Sanitary Standard (SSI) for Multiple-Use Plastic Materials. Test will cover;
a) ...
Food company needs ISO-17025 accredited laboratory to perform plastic (PFAS), allergen, environmental pathogen, aflatoxin, etc., testing.
MULTIPLE PRODUCTS
Contract Laboratory needed for Ozon Exposure Testing on rubber and plastic samples ; 100 ppm to 150 ppm by volume, for 2 hours; 9 samples
(Size Max. 75 x ...
Polymer Laboratory needed to perform the relevant ASTM tests (i.e ASTM D6814-02 and / or ASTM D 297-15.) to measure the percentage of devulcanization of a polymer (i.e the r...
CONSUMER
Consumer would like to test an unidentified recycled plastic/polymer/vinyl mulch that is used at a playground (instead of wood chips or rubber). I would like to anal...
Contract Laboratory needed for chemical composition testing of a silicon rubber sample. Our objective is to acquire as much information as possible to make sure we buy more of...
Contract Laboratory needed for ASTM testing of a new rubber formulation that needs to be tested based on ASTM D945 Standard Test Methods for Rubber Properties in Compression o...
POLYMER LABORATORY NEEDED TO PERFORM RGD (RAPID GAS DICOMPRESSION) OR ED (EXPLOSIVE DECOMPRESSION TESTING) FOR A RUBBER PART.
UK LABORATORY
MULTIPLE TESTING
Contract Materials Laboratory needed for elemental composition, size distribution, density, surface area and other material properties testing...
Large Corporation needs Contract Laboratory for flashpoint testing of acrylic polymer dissolved in butyl acetate.
MULTIPLE PRODUCTS
Contract Analytical Laboratory needed for Persistent Organic Pollutants (POP) testing in automotive rubber parts.
Please share quotation
URGENT
LONG TERM TESTING ...
MULTIPLE TESTING
Consumer Products Safety Laboratory needed for safety and toxicity testing of glow-in-the-dark cured resin product l used in 'decor art' products, targeted t...
USA LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for new hose product in both 3/8 and 1/2 style hoses testing for performance.
3/8 ID: 9 samples
1/2 ID: 9 sam...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Polymer Laboratory needed for Acetaldehyde and limonene analysis of recycled rPET resin (pellet) including Migration (SMl and OML), deco...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Materials Laboratory needed for different thickness rubber wet pour samples testing to determine fall height they are each designed for.
ASIA LABORATORY (VN/KH preferred)
MULTIPLE TESTING
Polymer Laboratory needed for Polyethylene terephthalate (PET) Flakes testing. Please let me know whether you can do the t...
Large company needs Polymer Laboratory for Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) block or cutting board cut resistance testing.
Polymer Laboratory needed for mechanical quality testing of injection molded polyolefin foams.
MULTIPLE PRODUCTS
Large Company needs Analytical Laboratory for oil products testing for percent of bromine index and aliphatic unsaturation (amount of double bonds) in total...
MULTIPLE TESTING
Contract Laboratory needed for testing Luxury Vinyl Tile (LVT) flooring product for dimensional stability, planar imbalance, and plasticizer imbalance.
L...
MULTIPLE TESTING
USA Polymer Laboratory needed for testing biodegradability of plastic sheeting according to ASTM D5526 standards.
Consumer Products Laboratory needed for testing footwear product for slip resistance according to ASTM F1677.
CONSULTING
MULTIPLE TESTING
Contract Laboratory needed for testing a product line of organosiloxanes - designed to improve impact modification, appearance, adhesion, and wat...
USA LABORATORY (Houston, TX)
Contract Laboratory needed for testing small scale rubber mixing (50-100 gms). What will be the charge per mixing?
MULTIPLE TESTING
Polymer Laboratory needed for testing plastic material and quantifying amounts of monomers in oligomers, such as HEMA, 2-EHA, TMDI, and IPDI.
Thank you,
Polymer Laboratory needed for testing xylene soluble for polypropylene resin.
Physical Laboratory needed for physical properties for one or more grades of N-Buna Nitrile rubber at various sample temperatures.
MULTIPLE TESTING
Polymer Laboratory needed for CLTE testing for a polymeric product as per test standards: ISO 11359-2 / ASTM E831
Contract Laboratory needed for radiation resistance testing on our rubber specimen. Required radiation is 100RAD gamma source 300kV.
If you can perform this, please let me...
Contract Laboratory needed for SAE testing according to SAE J2979 Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests