Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
We need to test valves with low-pressure air to calculate pressure losses. Pressure from 5 mbar to 100 mbar; size from 1 to 4.
A global pipes, valves, and fittings (PVF) distributor's client needs 46 gas sample bottles but did not provide much information (other than they get them from Maxxam)
We (th...
Independent Regulatory Consultant needed in medical devices on the following :
- ISO 11737-1 and 2 (Sterilization of health care products)
- ISO 10993 (Biological evaluation...
Contract Laboratory needed for ASTM Testing of PFA(Perfluoroalkoxy) Lined Sight Glass according to ASTM F1545 (Standard Specification for. Plastic-Lined Ferrous Metal Pipe, F...
USA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTING
Large Italian Manufacturer needs Contract Laboratory for pneumatic fittings product testing for compliance. Our DOT push-i...
MULTIPLE TESTING
Window Company needs Construction Materials Laboratory for certification testing of insulated glass window units.
LONG-TERM TESTING
MULTIPLE PRODUCTS
ISO 17025 Contract Laboratory needed for SASO-SABER certification testing for multiple building and construction products that are export...
EUROPE LABORATORY
MULTIPLE PRODUCTS
Europe Contract Laboratory needed for rubber gasket testing for gaskets used for pipe lines in Drinking water and waste water.
Por medio de la presente solicito una cotización para evaluar Coeficiente de deslizamiento y Un producto Poliuretano en base a la Norma AWWA C222 Polyurethane Coatings for the...
Contract Laboratory needed for fiberglass pipe support barrier testing for radiation absorption to measure the suitability for use in a nuclear facility.
Railway and RDSO approved Laboratory needed for ASTM F 1387 Double Ferrule Tube Fitting Testing
Electrical Laboratory needed for IEC testing of parallel groove clamp for overhead distribution lines according IEC 61284 Overhead lines - Requirements and tests for fittings
ASIA LABORATORY
Asia Mechanical Laboratory needed for ASTM rotary testing for 1/4, 3/8, 1/2, 3/4, 1 to ASTM 1387 Standard Specification for Performance of Piping and Tubin...
Mechanical Laboratory needed for zerk fittings quality control hardness testing. The print calls for a microhardness spec and the vendor claims in-spec according to the print....
MULTIPLE PRODUCTS
MULTIPLE TESTS
Construction Laboratory needed for certification of wall protection systems and expansion joints to the following US testing standards :
...
Contract Laboratory needed for ASTM D2992 Standard Practice For Obtaining Hydrostatic Or Pressure Design Basis For "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pi...
Electrical Laboratory needed for IEC testing of paralel groove clamp for overhead distribution lines according IEC 61284 Overhead lines - Requirements and tests for fittings
USA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTS
Modular Home System Company needs Construction Laboratory for testing proprietary components which are palletized and shippe...
Contract Laboratory needed for hubless pipe internal epoxy coating testing in compliance with EN 877 Cast iron pipes and fittings, their joints and accessories for the evacuat...
USA LABORATORY
MULTIPLE TESTS
MULTIPLE PRODUCTS
Contract Laboratory needed for ASTM Comparison Testing on fittings to ASTM F1387 on two types of fittings. .
Manufacturer needs Laboratory NF water taps certification
Tube Fitting performace testing as per ASTM F1387
LONG-TERM TESTING
MULTIPLE PRODUCTS
MULTIPLE TESTS
Large Construction Company needs large Construction Laboratory for testing industrial complex manufacturing concrete, GFR...
Contract Laboratory needed for quality testing of Copper Nipples to find its strength, durability and the pressure rating.
Food Company needs Materials Laboratory for ASTM Oxygen transmission rate for Flexible foil according to ASTM D 3965 Standard Classification System and Basis for Specification...
Accredited laboratory need to perform PVC fitting testing in compliance with requirements of ES BN 1329-1:2014 Plastics Piping Systems For Soil And Waste Discharge (Low And H...
Mechanical Laboratory needed for ASTM Testing of double ferrule compression fitting for pipe/tube connecting to ASTM F1387(2012) Standard Specification For Performance Of Pipi...
Aerospace Mechanical Laboratory needed for testing aviation spares hose fittings
Industrial Laboratory needed for ASTM tube fittings testing including hydrostatic burst test, Make break test,Reassembly test & Hardness test.Sizes:-1/4-1.to conform to AST...
Large Construction Materials Manufacturer needs Industrial Laboratory for DIN testing of plastic polyvinyl chloride PVC gutter systems to DIN EN 607 Eaves gutters and fittings...
Industrial Laboratory needed for IEC Testing of overhead lines according to IEC 61284 Overhead lines - Requirements and tests for fittings. The following tests should be appli...
Industrial Laboratory needed for ASTM tubes and pipe fittings testing to ASTM F 1387 test certification for my instrumentation fittings (Tube & Pipe fittings)
Large Corporation needs experienced Electrical Laboratory needed for IEC Testing for Corona and Radio Interference Voltage (RIV) and heat Cycle testing of overhead power cabl...
Telecommunications testing facility needed for near-field communication NFC standards testing of aerial cable fittings including insulated piercing connector to NFC 33 20
Metal Fittings company needs microbiology laboratory for biocidial efficacy testing of product surface testing according to EN ISO 22196 and TS EN 15457 standards. We are a ...
Mechanical Laboratory needed for ISO mechanical testing to ISO 594 Testing of Conical Luer Fittings
1. Luer Assembly: Ensures that the Luer specimen can be assembled with m...
Electrical Laboratory needed for IES Testing of LED Light fittings to Illuminating Engineering Society
of North America (IES), LM79 Approved Method for the Electrical and ...
Fittings company needs India analytical chemistry laboratory for raw material testing: Spectro (Chemical Analysis,) Micro, Mechanical,sand testing( No-Bake and Green sand) a...
USA automotive laboratory needed for SAE J2064 hose validation to test to to SAE J2064-2015 to do an initial validation of a new line of air conditioning hose and couplings in...
Materials Laboratory needed for ASTM Testing of Plastic Mechanical Fittings for use on outside diameter controlled Polyethylene gas distribution pipe and tubings ASTM F1924
Metallurgical Laboratory needed for copper tubes and fittings testing to BS EN 723:2009
Copper and copper alloys. Combustion method for determination of the carbon content ...
Materials laboratory needed to test UPVC fittings for ISO 1452-2 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure ...
ASIA electronics laboratory needed for IEC Testing: Lab Heat cycle testing of electrical Fittings to IEC 61238-1
Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6099 Part1 , BS 6099 Part ...
Electronics laboratory and analytical chemistry laboratory needed for mercury lighting fitting testing. Test for LED, sodium vapor, metalhalide, cfl, and mercury light fittin...
South Africa Laboratory needed for ISO testing to ISO 2531, Ductile iron pipes, fittings, accessories and their joints for water applications hydrostatic pressure testing of ...
Israel, Turkey or Europe physical laboratory needed for roduct classification testing - full test to a padlock to meet grade 4 by the BS EN 12320, Building hardware. Padlocks ...
Brazil hose manufacturer needs Product Safety Laboratory for product safety testing of hoses to EN BS 13 766 - ANNEX G - TABLE G.1 (Security of end fittings, Low temperature F...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests