Medical Device Company would like to rent Canada laboratory space to rent foanimal electrophysiology research in Toronto, ON, Canada. We will provide all equipment and staff, but we need vivarium service and other paperwork related to animal protocol approval. Thanks Dongchul Lee, Ph.D. Director of Theoretical Research

Submit Response

Corporation is is looking to purchase CLIA and COLA certified clinical laboratories throughout the US.

Submit Response

Petroleum Laboratory needs Laboratory Supplier to provide a quote for the following equipment for their laboratory.

LIST OF REQUIRED EQUIPMENTS S/N DESCRIPTION QTY Unit Price Total PETROLEUM TESTING LAB 1 Density Determination Equipment Model SLH- 1884 2 2 SP Gravity Tester 2 3 Rheometer. 1 4 Filters press with spices. 1 5 Plash Point Apparatus. 2 6 Pour Point Apparatus. 2 7 Lab Petroleum Distillation Apparatus with Accessories 1 PETROLUEM ENGINEERING Drilling Lab 1 Cement Mixers 2 2 Ultrasonic Cement Analyzer. 1 3 Core Drilling Machine with Diamond Bits and consumables. 1 4 Compressive strength tester Model STY-2000KN. British Standard 1 5 Drilling Fluid test kit 1 6 Core flow instruments ( systems) 1 7 Bench -Top consist meter

Submit Response

NABL Microbiology Laboratory needed for antimicrobial efficacy testing in novel Hand and Surface Sanitizer. We want to check it's antimicrobial efficacy.We are looking for: 1. Zone of Inhibition 2. Minimum Inhibitory Concentration 3. Or any other NABL accreditation tests

Submit Response

Pharmaceutical Company is looking for a 2000-3000 sq.ft rental space to put a biology laboratory Chemical handling, molecular cloning, human and animal cell culture, etc. in the Chicago area.

Submit Response

Company wants to purchase a CLIA and COLA certified clinical laboratory in the state of Colorado and New Mexico.

Submit Response

Laboratory Supplier needed that can provide the entire set of laboratory equipment for setting up a new engineering laboratory.

Closed

Large company needs quotation forREACH analysis to confirm electronic resistor products are compliance with Reach.

Closed

Company looking for clinical laboratory for sale or merger in or around Dallas, Tx.

Closed

USAF Radiation Dosimetry Laboratory needed for TMDE calibration for 10 EPD MK2+ Radiation Dosimeters

Closed

Laboratory consultant needed for advising on starting a Consumer Products Laboratory for testing gold and silver jewelery. we do not have any lab in our country

Closed

LONG-TERM TESTING Mobile Laboratory needed to provide regular clinical testing services to assisted living care facility.

Closed

Hi sir, we are the manufacturer of incense and successfully drive ahead our business, but we need to get accreditation,for this we need to analys our incense sample,but irony is,we dont have any sop by which we could analysis our incense,moreover we are unaware what kind of test should be carried out for analysing incense,we need to know what kind kind of test and instrument we need, thanxexplain we would be very grateful of you.Best regards,Mohammad jamal

Closed

Large Laboratory needs service provider for a Jasco FTIR and a Jasco FTIR/Microscope

Closed

Looking to rent an equipped laboratory space to perform soil testing. Space is needed for the month of October, will be in use 2-3 times per week. Will provide all necessary documentation of the company/scientists, insurance if needed. We only need the space + equipment. If there are some options I can send the list of equipment needed. We prefer to have it all available but are open to purchasing/renting if there are some items missing.

Closed

Company looking to purchase environmental/industrial lab in Illinois. with the preference on the Chicagoland area.

Closed

Looking to rent an equipped laboratory space to perform soil testing. Space is needed for the month of October, will be in use 2-3 times per week. Will provide all necessary documentation of the company/scientists, insurance if needed.

Closed

e-beam contract sterilization

Closed

Contract Sterilizer for eBeam services

Closed

Company interested in acquiring drug toxicology or DNA Laboratories with a w2 salesforce from anywhere in the country.

Submit Response

Texas Company looking to buy laboratory in Texas for microbiology and analytical testing of dietary supplements.

Closed

Company wishes to purchase a laboratory for environmental testing, specifically soil and water analysis for agriculture in Canada.

Closed

Laboratory Service Provider needed for calibration of Acculab 101 Reference Sound Source (use for determination of sound power levels).

Closed

Large Manufacturer would like to buy an automatic polymer viscometer for the testing of PET material IV to ASTM-D4603 .Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

Closed

URGENT / LONG-TERM SERVICE ISO/IEC 17025:2005 service provider needed to calibrate a gauss meter in accordance to :ANSI/NCSL Z540-1-1994. The later is to measure magnetic Flux Density.

Closed

Architect / Consultant needed for assisting on design and equipment for Petrochemical Laboratory.

Closed

FDA accredited Food Laboratory needed for nutritional facts and contamination of vegan nutrition solid beverage powder, consisting of different plants species.

Submit Response

Laboratory Consultant / Architect needed to design analytical research and diagnostic laboratory. which provides analytical services in medical, veterinary, food and forensic science.

Closed

Laboratory Architect needed for design and construction of Agriculture Laboratory. for aflatoxin and other agriculture testing.

Closed

Microbiology supplier needed for inoculated AOAC carriers for both sutures and penicylinders with Bacillus subtiilis and Clostridium sporogenes.

Closed

Contract Sterilizer needed for steam sterilization of chemical solution samples.

Submit Response

LONG-TERM TESTING Microbiology Laboratory needed for industrial biocides challenge and dry film tests (with and without leaching)

Closed

Laboratory Supplier needed for pure cultures of cellulose catalyzing bacteria for researcher studying how the bacteria work son sugarcane residue.

Closed

Agriculture consultant to advice on the tolerance limits of pesticides as defined by FAO Food and Agriculture Organization of the United Nations as provided by under Agricultural pesticide Ordinance 1973.

Closed

Beverage Company wishes to rent formulation laboratory in Los Angeles for $500/month or less

Closed

Laboratory wants to purchase second hand surface profilometers which can measure thickness of atleast a few nanometers(20-500nm) like Alpha step IQ profilometer or alpha step 200 profiometer. or the likes from dektak with a price under $5500

Submit Response

Company would like to purchase or rent existing laboratory for extracting cannabis material.

Closed

Company looking to buy or merger or invest in an existing lab with licence to deal, sell or grow cannabis in Canada

Closed

Non-USA Company Interested in buying a running Food Testing Laboratory in USA.

Closed

Contract Sterilizer needed for steam contract sterilization of liquid filled IV bag using terminal moist heat sterilization. As these are Polypropylene based IV bags, they need to be only sterilized using steam-air mixture sterilizer to preserve the elasticity/integrity of bags post-sterilization.

Closed

Biomedical Research Laboratory needs laboratory supplier for providing a quote on a variety of instruments, apparatus, reagents etc. This document is an attachment to this request.

Closed

Cosmetic chemist planning on starting cosmetic laboratory would like to receive information on laboratory rental space in Maryland. The Cosmetics Research and Development services will be to cosmetic business owners who wish to start their own line. I would like to receive more information regarding space availability.

Closed

Company looking to purchase an instrumentation testing/calibration laboratory.

Closed

Development Corporation wants to purchase Laboratory with real estate in California

Submit Response

Company looking to purchase numerous, well-established medical testing laboratories. Looking for established business with employees, not a one man shop. Currently doing genetic testing a plus. Must accept Medicare, medicaid, PPO, etc...

Submit Response

Healthcare Organization needs Contract Sterilizer for contract sterilization of devices for over 20 locations . Company must be able to pick-up and delivery.

Closed

Healthcare Organization needs Contract Sterilizer for contract sterilization of devices for over 20 locations . Company must be able to pick-up and delivery.

Closed

Technology Firm needs ISO 17025 Calibration Service Provider needed for calibration of Reference Sound Source for a 1 year cal cycle.

Closed

Laboratory supplier needed for quote on the foowing pharmaceutical ingredients and packaging: Vitamin B1 Thiamine HCL Powder CAS No. 67-03-8 Application: Pharmaceutical Grade Packing: 25kg/drum net weight Quantity: 500kg Vitamin B6 HCL (Pyridoxine Hydrochloride) Powder CAS No. 58-56-0 Application: Pharmaceutical Grade Packing: 25kg/drum net weight Quantity: 500kg

Closed

Medical and Laboratory Equipment Manufacturer wishes to purchase a laboratory that sells and repairs equipment.

Closed

LONG-TERM TESTING Pharmaceutical Microbiological Testing Laboratory needed for the USP Preservative Effectiveness Testing , Suitability test, and regular microbial testing (USP<61><62>) on cosmetics, pharmaceuticals semisolid, suspensions, solutions products/prototypes including non-sterile creams, lotions, gels, solutions prototypes/products samples.

Closed

35,000 square foot office building with laboratory facilities for sale or rent Northeast USA. Very flexible and attractive terms available.

Closed

Probiotics company needs microbiology Contract Manufacturer needed for manufacturing chemically defined medium for growing Lactobacillus spp

Closed

UK research company needs to rent laboratory for oil research in Detroit Michigan

Closed

Established Analytical Chemistry Contract Laboratory available for acquisition

Closed

University Scientific Researcher wants to purchase the following osteoblastic cell lines as well as antibiotics, culture medium, assay kits

1 MC3T3-E1 mouse osteoblastic cell line 2 C3H10T1/2 mouse osteoblastic cell line 3 DMEM medium 4 ?-MEM medium 5 10% fetal bovine serum (FBS) 6 Penicillin 7 Streptomycin 8 Ascorbic acid 9 ?-glycerophosphate 10 dexamethasone 11 Water-Soluble Tetrazolium Salt (WST) Assay 12 EZ-Cytox Cell Viability Assay Kit 13 Sodium phosphate monobasic 14 Disodium phosphate dibasic 15 Sodium chloride 16 Alkaline Phosphatase (ALP) Assay 17 Calcium C-test kit 18 Phosphor C-test kit 19 Mouse Osteocalcin EIA Kit 20 Tris-HCl 21 Triton X-100 22 Magnesium chloride 23 p-nitrophenylphosphate 24 70% Ethanol 25 Whatman No. 2 filter paper 26 Crystal violet 27 Toluidine blue 28 Alizarine red 29 96-wel

Closed

Upstream Oil and Gas , production chemistry testing laboratory for sale. Existing wide client base mainly small to mid cap E+P companies. Bespoke facilities and technologies to evaluate fluid properties and chemical requirements, QA and approve drilling, completion and production chemicals on behalf of operating companies.

Submit Response

Partnership for sale in small size, fully equipped clinical laboratory as one partner wants to exit.

Submit Response

LEGAL DNA expert needed for expert witness testimony and consultation. The genetics expertneeds to be able to testify about touch / transfer DNA, the fact that DNA existence does not prove commission of crime, etc.

Closed

Diagnostic company looking for clinical laboratory to purchase. Company must have in-network with the big 5 as well as some fed plans.

Submit Response

Laboratory needs Contract Manufacturer to assemble kits for the NIH Taste Intensity Test which includes: gloves, 2 sterile cotton swabs, gloves (latex free), bottle of purified water, disposable cups, Quinine solution in small cups and salt solution in small cups. The solutions need to be mixed according to very specific instruction using appropriate equipment.

Submit Response

Contract Manufacturing Organization CMO needed for lyophilization of human serum product including lyophilize 3000 vials of 7ml bottles at one run

Submit Response

Medical Device Manufacturer needs Contract Sterilizer for ETO and E-Beam sterilization experiments on materials used in medical devices.

Submit Response

Laboratory needs to purchase the following laboratory instruments: Kinematic viscometer bath ASTM D445) 40deg.c &100deg.C and flash point (COC), Hydrometer

Closed

Laboratory Consultant needed for assisting on the design and development of a telecommunication certification laboratory.

Closed

LONG-TERM Contract Sterilizer needed for sterilization of a range of measuring fragile medical equipment post contact with human tissue. Components must be sterilized such that they can be once again used for general laboratory use. Considerations: -Two of the devices to be sterilized are digital electronic calibrated measuring equipment. Ideally the sterilization will not adversely impact calibration or functionality. Option to re-calibrate post sterilization cycle. -Parts must be shipped to the sterilizer, sterilized, then shipped to our facility. Some thought needs to be put into this transportation as some of the equipment to be sterilized is fragile. My current research has suggested that the following may be the track forward. After exposure to human tissue all items are cleaned of stains and excess tissue contaminant, wiped with Vi

Closed

Analytical Laboratory wishes to purchase an USA environmental Laboratory and/or all of their equipment.

Closed

Company wishes to acquire a calibration lab/metrology laboratory in the Southwest, Midwest or Southeast.

Closed

Laboratory wants to purchase a used Leica cm3600 cryostat

Closed

Gamma Contract Sterilizer needed for process change and potential revalidation of changing a gamma irradiation cycle that from 35-45 kGy range to this cycle reduced to 25-35kGy.

Closed

Company looking to acquire a CLIA accredited laboratory with 5-15 employees in Virginia / North Carolina / Georgia.

Closed

Engineering firm needed to build in house Biosafety lab 2 for performing robotic surgeries on cadaver specimens.

Closed

Laboratory Supplier needed of Hapsite ® Portable GC-MS with Accessories.

Closed

Laboratory needs to purchase electrodes for an EC Meter 4510 by JENWAY.

Closed

Contract Sterilizer needed for ETO and E-Beam sterilization experiments on materials for medical devices.

Submit Response

Biotechnology Firm wishes to acquire an existing small producer of monoclonal antibodies

Closed

LONG-TERM SERVICES Laboratory needs contractor for routine maintenance on all of our incubators and fridges used in the lab. Able to provide more specific information for a quote.

Closed

LONG-TERM SERVICES Contract Sterilizer needed for steam sterilization services for titanium medical devices, batches of 100-1000 peel-packs max 10 x 20 cm. ISO 13485 Autoclaves should comply with the requirements of, and be validated, maintained and checked in accordance with EN 285/EN 13060, EN ISO 17665

Closed

Laboratory Engineering Company needed for construction and set-up oil testing laboratory for refined petroleum products. The laboratory will carry out testing to confirm they meet specifications before they are received and discharged into storage tanks.

Closed

Company is looking to acquire an existing Medical Laboratory in the UK. The laboratory must offer diagnostic and microbiology services at a minimum

Closed

Company needs laboratory service provider to perform maintenance on fume hoods.

Closed

Laboratory wishes to acquire a Metallurgical Testing laboratory in the Pune, Nashik or Vadodara area of India.

Closed

Food Analytical Chemistry Laboratory needed for alcohol content testing on pure maple syrup that has been aged in a bourbon barrel for 2 months. We need to know if the alcohol content is under 1/2 of 1%. Or if it is higher what the % is.

Closed

LONG-TERM Medical Center needs Ethylene Oxide Contract Sterilizer for outsourcing their EO sterilization. Medical Center is in preliminary exploration stage in locating and choosing a Contract Sterilizer.

Closed

Company wishes to acquire a food and beverage testing laboratory in India,

Submit Response

Company wishes to purchase a Medical Laboratory in DFW -Tx

Submit Response

Company wishes to purchase an existing laboratory for Lyme disease testing and co infections in Canada triant steuart

Closed

Metrology company wishes to acquire a metrology laboratory in the US and India.

Submit Response

Diagnostic company seeking to buy a laboratory or lease lab space in the Dallas area ASAP

Closed

Testing facility needs lab supplier of various laboratory test instruments including HPLC, GC, and head space analyzer.

Closed

Company needs crl lab kits for life insurance exams

Closed

Laboratory would like quotes for the purchase of maturation and recovery media'' for the maturation of nenatal or young immature porcine islet

Closed

Mining company needs to purchase all available laboratory equipment for determining fumes and dust emitted to the atmosphere as a result of mining operation.

Closed

High complexity medical laboratory is seeking to expand to physician and private practice business and would like to purchase a lab that has existing approval for all major insurance providers.

Closed

Laboratory wants to purchase mechanical lung for burn testing.

Submit Response

Start-up laboratory looking for assistance with purchasing laboratory equipment for a food testing and livestock diagnostic laboratory

Submit Response

Distillery's laboratory needs laboratory supplier to purchase a gas chromatography analyser to analyze samples from bottling 200,000 bottles of an alcoholic beverage.Please send quote along with product specifications and warranty details.

Submit Response

US pharmaceutical company needs contract sterilizer in India for sterilization.

Submit Response

Laboratory consultant needed to help determine budgetary needs for outfitting new preclinical in vivo laboratory

Submit Response

Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification of Agrochemicals & Pesticides, Basic & Industrial Chemicals, Dyes & Detergents, Lubricants & Greases, Nano materials, Petrochemicals, Polymers & Plastic , Food, Medical Devices, Pharmaceuticals, Beauty & Personal Care Products

Closed

Toxicology laboratory needed for several in-vivo and in-vitro FDA and OECD toxicological studies for botanical ingredient including:

-14 days toxicity study as per FDA and OECD -28 days tox study as per FDA and OECD -90 days to study as per FDA and OECD -AMES Test -CHROMOSOME Abbreation Test -In vivo erythrocyte micronucleus test

Closed

Materials laboratory needed for gel permeation chromatography (GPC) for molecular characterization of natural rubber. Mn, Mp, Mz, Mz+1, Mv, bulk IV, and bulk Mw numbers will be needed in the report.

Closed

Environmental microbiology laboratory needed for protein digestibility corrected amino acid score (PDCAAS) testing of a fungal biomass.

Closed

LONG TERM TESTING. Food laboratory needed for shelf life testing of fried foods to determine the correlation of shelf life with frying oil chemistry and specific oil compounds.

Closed

Environmental toxicology laboratory needed for OECD environmental fate study: biodegradation to OECD 301C / 301F method Ready Biodegradability Tests

Closed

Medical device company needs clinical product safety laboratory for in vivo, in vitro and microbiology testing of disposable feminine pads including:

Surface device testing with just contact to the skin or breached/compromised surface (due to labial contact). We will do a limited exposure (less than 24 hours) testing.

Microbiology testing as pads release oxygen and slightly acidify the pH within the pad once blood reaches our patented powder. We want to see if it has any effect on microbes.

Odor testing.

Measure the pH after blood has entered the pad to see how the pH is affected after blood has entered.

Amount of oxygen released per pad, the amount of CO2 absorbed per pad and the amount of humidity absorbed per pad?

Closed

Medical Device company needs microbiology laboratory for microbiological tests of diapers and underpads.

Closed

URGENT Food importer needs ISO 17025 food laboratory for imported oil certification testing of food containing oil derived from beef including insoluble impurities (not exceed than 0.15% in weight) for the beef oil used. Please provide a quote as well as specify how long will it take for the test result.

Closed

Oil refinery company needs analytical chemistry laboratory for silicon dioxide testing for determination of % purity (Silicon Dioxide) Sample is synthetic amorphous silica used as antiblocking agent

Closed

Pharmaceutical medical device laboratory needed for sperm motility testing of a personal lubricant according to ISO 10993-10.

Closed

Food Laboratory needed for chili oil testing: nutritional labeling and shelf life studies.

Closed

Individual Request. Geological laboratory needed for testing sand for the presence, and content of iron and gold.

Closed

University researcher needs analytical chemistry laboratory for formulation study and expiration dating of natural oil based mosquito repellent.

Closed

Clinical laboratory needed for serology and bioverting testing (14 days) of a composite.

Closed

Pharmaceutical laboratory needed for SODIUM MONOFLUOROPHOSPHATES certification testing to meet compliance to USP. Quote needed.

Closed

Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:

1. Leaching test - Based on EN12457 - 2 Part 2 and EN ? 12506

2. Sulfur test - Based on ISO 4689-3 : 2004

3. Corrosion test - Based on LPR method (Linear Polarization Resistance Method)

Closed

Large Consumer Products Company needs a GMP consumer product laboratory for a staining discoloration assessment on bathes from coloured bath fizzers.

Closed

Motor oil laboratory needed for JASO T903 (DFI, STI, etc.) testing of automotive oil.

Closed

Food analytical chemistry laboratory needed for olive oil analysis: Olive Oil Extraction using CTAB purification method. CTAB Method of Doyle and Doyle, 1987

Closed

Petroleum laboratory needed for ASTM Testing: oil particle count analysis according to ASTM D6786.

Closed

LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection, .

Closed

Disinfectant & hand sanitizer manufacturer needs microbiology laboratory for antiviral efficacy testing of product formulations against viruses.

Closed

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components 1. Leaching test - Based on EN12457 - 2 Part 2 and EN - 12506 2. Sulfur test - Based on ISO 4689-3 : 2004 3. Determination of resistivity : ASTM G57-06 4. Corrosion test - Based on LPR method (Linear Polarization Resistance Method)

Closed

GLP metallurgical laboratory needed for AOAC 2006.03 standard or EPA6010/6020 testing for Aresenic, Cadmium, Cobalt, Molybdenum, Nickel, Lead, Selenium, and Zinc.

Also, need Hg analysis using EPA747A or 7471A or 7473 or 7474. Digestion for EPA methods: 3050B/3010/3020/3051.

Closed

Large petroleum company needs Industrial chemistry laboratory for ASTM petrochemical testing to ASTM D8031-16 for acid number of terephthalic Acid (TA) by automatic potentiometric titration.

Closed

Agricultural laboratory needed for inorganic nitrogen content, soil fertility, and nitrogen concentration testing in 78 soil and plant samples.

Closed

LONG TERM. Oil and petroleum testing laboratory needed for ASTM testing of oil samples in the Middle East.

Closed

High complexity Laboratory looking for partner to add high volume LCMS and Molecular testing.

Submit Response

Fuels laboratory needed to separate jet fuel from MIL-PRF-6081 Grade 1010.

Closed

Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbiology testing:

ASTM D7661-10, Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms for compliance with latex and polyisoprene condoms.

ISO 10993-5 Biological Evaluation of Medical Devices-Part 5: Tests for in vitro cytotoxicity

ISO 10993-10 Biological Evaluation of Medical Devices-Part 10: Tests for irritation and skin sensitization

ISO 10993-11 Biological Evaluation of Medical Devices-Part 11: Tests for systemic toxicity

United States Pharmacopeia, National Formulary General Chapter <88>: Biological Reactivity Tests, In Vivo

USP <51> Antimicrobial Effectiveness Testing

USP <61> Microbiological Examination of Nonst

Closed

Wishing to purchase laboratories located near or around Central Jersey. Also, the laboratory could be purchased for licensing and moved. There are many different variables such as accreditation, insurance mix machine, and so on so I would be interested in looking at all opportunities. This would include any lab since Toxicology could be added. The price range is determined by the specific deal. Also if to only the lab could be purchased for the licensing and moved to a desirable location since servicing allows for distance from location with receiving samples of of state or geographic location of the physical lab.

Submit Response

Owner of of independent fully equipped, turnkey chemical, food science, and pharma R&D laboratory wishes to retire and sell laboratory.

Submit Response

Laboratory looking to purchase cGMP FDA Registered Testing Laboratory in Arizona or Nevada. Ideally has USP <71> Sterility Testing capabilities

Submit Response

Food contact surface testing on scented mineral oil used for wood surfaces( wooden chop blocks) for direct/indirect food contact a

Closed

URGENT! Oil chemistry laboratory needed for testing solvent-extracted cottonseed cake to determine levels of free gossypol using the American Oil Chemists Society Method (AOCS, 1987 a,b).

Closed

Microbiology laboratory for sale in Eastern Europe

Submit Response

Research and Development Laboratory needed for product development studies for the development of new concentrated granulated fertilizer material processed from zeolite material (sand) into concentrate with the highest possible purity (using magnetic separation), and then from concentrate produce granulated fertilizer/material.

Closed

Oil Laboratory needed for Petroleum quality testing prior to export from Yemen

Closed

Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & industrial fields. In business for over 20 years, existing customer base, all test equipment, manufacturer service manuals & pertinent spare parts. Service for temperature, humidity, CO2, pressure, air flow/velocity, smoke test for fune and biological chamber testing, We presently service: CO2/temperature/humidity chambers, anaerobic chambers, centrifuges, cryoscopes, microscopes, sterilizers, Ultra low freezers/cryogenics. All pertinent equipment found in QA/QC laboratories

Submit Response

Established environmental laboratory in Brazil would like to acquire environmental laboratory in Minnesota area as well as acquiring used lab equipment.

Closed

LONG-TERM TESTING Oil Laboratory needed for hydrocarbon testing to quantify the amount of petroleum hydrocarbons (Semi volatile- kerosene, oil, diesel etc..) in soil and sediment samples.I

Closed

Former biotechnology laboratory space in tristate area Class-A Building for rent. Available space around 30,000 sq ft , will divide

Submit Response

Company looking to buy a going-out-of-business biotech company/lab. The deal shall be structured as assets (equipment) purchase + lease assumption.

Submit Response

Accredited Food and Agriculture laboratory looking for buyer for takeover of the running business.

Submit Response

Company planning on establishing independent and third party Tobacco & Cigarettes Testing Lab based on ISO 17025 Standard, would like to purchase : 1) A routine analytical cigarette smoking machine based on ISO 4387 & ISO 8454 for Determination of total and dry particulate matter and carbon monoxide in the vapour phase of smoke ? Non dispersive infrared (NDIR) method (SM450 COA 20) 2) A laser beam measuring apparatus based on ISO 2971 for Determination of nominal diameter, ISO 6565 Draw resistance of cigarettes and filters rods and ISO 2965 Determination of air permeability (Quantum Neo WGCVK) The most critical issue we have is the lead-time which shouldn?t exceed 2 months from the date of order. So your co-operation and consideration is highly appreciated. You offer should include all related accessories, installation, commissioning and

Submit Response

Food testing laboratory needed for quality testing analysis of linseed and walnut oils for Acid value (mgKOH/g); Iodine value (g12/100g); and Fatty acids (%): Palmitic acid, Stearic acid, Oleic acid, Linoleic acid and Linolenic acid.

Closed

Interested in purchasing laboratories for sale

Submit Response

Laboratory needs laboratory supplier of Sartorius 620g top loader. Readability 0.001gr; linearity 0.001gr

Submit Response

High complexity medical laboratory services would like acquisition, partnership, or collaboration of a clinical laboratory in Ohio.

Submit Response

Africa company wishes to form a joint venture / partnership / collaboration with a well equipped laboratory in Africa to service some of my customers testing requirements.

Submit Response

Contract sterilizer needed for cosmetics sterilization containing human proteins without denaturing the proteins.

Submit Response

Biofuels company needs laboratory consulting firm needed for establishing a full petroleum engineering laboratory from design and equipment.

Submit Response

Group of investors considering opening a care facility for blood disorders needs laboratory consultant to educate them on onsite contract laboratory services.

Closed

Contract Sterilizer needed for Gamma ray sterilization for food packaging.

Submit Response

GLP Laboratory Consultant needed for GLP audit of laboratory that performs flow cytometry on who human blood, purifying human lymphocytes, and cultivating/assaying the function of human lymphocytes. Please specify pricing.

Submit Response

Engineering firm needed for laboratory design consultancy to design laboratory complexes for 52 labs. Project is in concept design phase and is provided with area programming.

Closed

Laboratory needs laboratory supplier for new laboratory set-up including: full auto hematology analyzers, full auto biochemistry , immunology, coagulation , cd 4 counter, urine analyzer, sperm analyzer etc

Submit Response

In-Vitro Toxicology Laboratory needs laboratory quality consultant for quality assurance training.

Closed

Biotech company needs Contract Sterilizer for gamma radiosterilization of medical device with cobalt-60.

Submit Response

Start up company seeks to build and develop a relationship with a lab that is capable of both deformulation and reformulation of several samples with the goal of creating proprietary products.

Submit Response

Jet engine maintenance company seeking company for calibration testing.

Submit Response

Regulatory Consultant needed for evaluation of Australia, china, Mexico, Korea and possibly the European markets. We currently only sell our products in the USA. We want to sell ecommerce in those other countries and then possibly look at distribution and/or wholesale.

Submit Response

Electrical safety testing and calibration of lab equipment including laminar flow hood, centrifuge, etc.

Submit Response

Clinical laboratory consultant needed for advising on the mail-in subscription service for disgnostic blood and urine testing.

Submit Response

Clinical Diagnostic Laboratory specializing in toxicology needs laboratory consultant to help us get their business moving with billing and getting paid our reimbursement.

Submit Response

European Manufacturer of Ground spices needs Europe Contract Sterilizer for steam sterilization of the spices prior to exportation.

Submit Response

Outpatient company in tristate area needs contract sterilizer of surgical surgical trays

Closed

Pathology laboratory needs contract maintenance company for annual centrifuge maintenance

Submit Response

Biochemistry laboratory needs cell line supplier for mouse GT 1-7 hypothalamic cell lines

Submit Response

Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding of the emulsion proved elusive plus other problems were hard cold starts, check engine light, corrosion, swelling of fuel system seals and poor fuel mileage.

Closed

Contract Maintenance Company needed for maintenance and calibration on a Varian MPX ICP-OES in the Vancouver BC Canada area.

Submit Response

LONG TERM TESTING: NABL and ISO/IEC 17025:2005.laboratory needed for osmolarity testing of personal lubricants

Closed

Clinical Research laboratory needed for irritation and allergy testing of deodorant.

Closed

Oil Laboratory needed for DIN grease testing along with determination of rheological resistance.

Closed

Materials Science laboratory needed for ASTM shear stability testing of a sample using ASTM D 6278 standard.

Closed

Oil Laboratory needed for DIN Grease Testing to DIN 51816-1 Testing of Lubricants; Conveying Characteristics of Greases; Determination of the Rheological Resistance by the Shell-DELIMON- Rheometer

Closed

Oil laboratory needed for hydrocarbon testing: surfactant/solvent formulation diluted in water at various concentrations to determine the surface tension as well as solvency of hydrocarbons - petroleum oil.

Closed

Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance

Closed

URGENT Oil Laboratory needed for American Petroleum Institute API light, medium, heavy and extra heavy oil testing. Need 15 samples analyzed 5 initial, 5 mid level refinement; 5 final refinement. What volume is needed. What is the cost. This is going into a pre-approved contract today.

Closed

Energy company needs laboratory to test oil based drilling fluids from 4 different drilling rigs in Wyoming for aniline point.

Closed

LONG-TERM TESTING: EPA GMP environmental laboratory needed for routine analysis of marine oil for two attributes: 1. EPA 1613 rev B for dioxins/furans 2. EPA 1668 rev A for PCBs

Closed

Oil laboratory needed for ASTM gasoline testing for specific heat and thermal conductivity to: Specific Heat Capacity by ASTM D2766 versus temperature of gasoline sample. Thermal conductivity by ASTM D7896 versus temperature of gasoline sample.

Closed

Ongoing opportunity to provide a transport company shipping Basis Jet A1 with Pre Discharge test and after discharge to conduct recertification test 'B '

Closed

URGENT TESTING Soap product company needs laboratory for stability testing for Carrot Oil

Closed

Microbiology Laboratory needed for Microbiological Testing for Personal care products i

Closed

Oil Laboratory: needed for gasoline testing to determine the pKa of a commercial gasoline from California.

Closed

Renewable Energy Company needs pyro oil produced from tire pyrolysis tested for sulfur concentration.

Closed

Large oil company needs Oil Laboratory for Quantitave diamondoid GC-MS analysis

Closed

Consumer Product Laboratory needed for testing a Personal Care Product for contaminants: Glycerin needs to be evaluated for cause of hazing and color change.

Closed

Cosmetics Laboratory needed for skincare product testing of gels for N-NITROSODIETHANOLAMINE (NDELA)

Closed

Large oil company needs Polymer Science Laboratory for polypropylene copolymer analysis for % ethylene content

Closed

Food Laboratory needed for USP and ASTM Testing: Compliance testing per US standards for oils: USP Grade White Oils for FDA, ASTM, and similar standards as per United States Pharmacopeia. Readily Carbonisable substances, ASTM D565, Acidity, PCAH, Sulphur, Infrared Absorption, FDA 21CFR 172.878 and 178.3620 as per ASTM D2269

Closed

Consumer Products Cosmetics Laboratory needed for reformulation of water-based nail polish for kids.

Closed

Cosmetics Laboratory needed for Beauty products testing on imported soaps & oils

Closed

Large energy corporation needed materials laboratory for Corrosive Sulfur Test according to DIN 51353, Testing of insulating oils; detection of corrosive sulfur; silber strip test

Closed

LONG-TERM TESTING Analytical Chemistry Laboratory needed for qualification testing to determine inhibitor (MeHQ) and PTZ (Phenothiazine) in acrylates by HPLC. We expect to have 2 samples ready for this test the week of 11/14-18. These first two samples are to qualify us for a major customer, and it will be ongoing work.

Closed

Analytical chemistry laboratory needed for mouthwash testing by gas chromatography for quantitative determination of related substances / impurities of hexetidine in mouthwash formulation

Closed

Environmental laboratory needed for surface water testing of 4 acre lake displaying a very small diesel oil pollution bloom from run off surface water in the vicinity. Need lake water tested before stocking it with expensive carp.

Closed

Oil Laboratory needed for recovered hydrocarbon / oil testing 1. Standard and RTFOT viscosity tests in accordance with latest edition of ASTM D3381 or AASHTO Designation: M 226-80 plus one at 135 deg. C 2. Penetration test ASTM D 946 and AASHTO M 20 (Penetration @ 25°C)

Closed

Food laboratory needed for thc content and shelf-life testing of coconut oil and olive oil

Closed

Laboratory needed for hazardous waste testing: Tar Fuel burn test for total nitrogen

Closed

Oil laboratory needed for Fuel testing on a pump-grade gasoline: all tests need to be ASTM certified: Ethanol, Benzene, Total aromatics, oxygen, olefins, RON, MON, Dry Vapor Pressure Equivalent and Reid Vapor Pressure

Closed

Geology Laboratory needed for ASTM testing: Analys of rock salt (sodium chloride) based on requirements of ASTM D632. Chemical analyses will include sodium chloride purity (%NaCl) and moisture, but sodium ferrocyanide may also be requested. Physical analysis will entail a sieve analysis on the rock salt to determine the particle size distribution.

Closed

Medical Device Laboratory needed for quality control testing of sanitary pads for all quality parameters including physical measurements.

Closed

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1. Temperature & latitude test as per DO 160 Section 4 Category -B3.

2. Temperature Variation test as per DO 160 D Section 5 Category-A.

3. Fluid Suceptability test as per DO 160 D Section 11 Category-F.

4. Humidity test as per DO 160 D Section 6 Category-C.

5. Fungus test as per DO 160 D Section 13 Category-F.

6. Salt Spray test as per DO 160 D Section 14 Category-S.

7. Water Proofness test as per DO 160 D Section 10 Category-S.

8. Icing test as per DO 160 D Section 24.

9. Operation shocks & crash safety test as per DO 160 D Section 7 Helicopter Category.

10. Constant Acceleration test test as per MIL-STD-810 Method 513.5.

11. Vibration test as per DO 160 D Sec

Closed

Oil laboratory needed hydrocarbon testing with it's interaction with various solvents an process streams including analysis of hydrocarbon solutions with elemental sulfur. Also, sulfur purity tests and the ability to work with pure elemental sulfur and its interaction with various solvents and process streams.

Closed

Clinical Research Laboratory needed for clinical study of oral care products including sensory testing and preference testing for the preference/ acceptance of oral care product (mouthwash), and to have it compared with competitor products.

Closed

LONG-TERM TESTING: Third-party consumer product laboratory needed for cooking oil filter performance testing. Requires food to be fried, oil filtered and multiple tests on the oil need to be performed including FFA, Peroxide, Anisidine and more on oil used in the consumer goods market. It would require food being fried twice per week, the oil filtered through filter and the oil tested for safety.

Closed

Laboratory needed for crude palm oil testing for: Benzo (a) pyrene ISO 15302 Mineral Oil (C10 - C56) According to Fediol guideline Gas Oil (C10-C24) According to Fediol guideline

I need to send 4 samples.

Closed

Optical absorption of crystal substrate using laser calorimetry.

Closed

Laboratory needed for gas flooding-reporting on slim tube, gas injuction and flow assurance

Closed

Oil Laboratory needed for cetane testing for additives including specific gravity density cloud point and flash point cetane number and cetane index

Closed

Environmental laboratory needed for sediment testing from drained covered reservoir for: sediment chemicals, nitrates,nitrites, NDMA, Chromium 6, mercury, lead, polonium, bismuth, radon decay products, PCB, DDT, chloroform residual in sediment, haloacetic acid residual in sediment Sediment samples in drained covered reservoir, to assess chemicals present

Closed

Oil laboratory needed for ASTM Flashpoint testing for Diesel fuel to comply with ASTM standards

Closed

Analytical chemistry laboratory needed for rice bran oil percentage testing.

Closed

Laboratory needed for ASTM Testing of aggregates used in oil pipeline operations to the following standards ASTM:Cement:ASTM C150 ? Standard specification for Portland cement Aggregates:ASTM ?294, ?295 - Standard Guide for Petrographic Examination of Aggregates for Concrete ASTM C33 - Standard Specification for Concrete Aggregates ASTM C637 -Standard Specification for Aggregates for Radiation-Shielding ConcreteWater:ASTM C1602 - Standard Specification for Mixing Water used in the Production of Hydraulic Cement Concrete.Steel wire:ASTM A82- Standard Specification for Steel Wire, Plain for Concrete ReinforcementEN 10080 ? Steel for the Reinforcement of Concrete. Weldable Reinforcing Steel. General (Option)

Closed

Oil Laboratory needed for ASTM oil testing. Need No 6 Oil tested for kinematic viscosity at 40C and density.

Closed

Materials laboratory needed for propylene testing for the Purity of Liquid propylene

Closed

Geology laboratory needed for sand analysis from mining operation

Closed

Laboratory needed for verification testing of Emu Oil quality to the International Emu Association standards.

Closed

Accredited laboratory needed for coconut oil testing for: VCO Saponification value (SV), Free Fatty Acid (FFA) value (Fatty Acid Methyl Esters (FAME) compositional analysis), Triacylglycerol (TAG) analysis (HPLC), Tocopherol analysis (HPLC), moisture content and range of brightness and yellowness Trace metals.

Closed

Environmental Laboratory needed for mineral analysis in soil samples: X-ray analysis, particle size analysis was carried out on each sample to separate and prepare the clay fraction for the analyses. Samples were prepared for XRD Analysis using a back loading preparation method. 10 % internal standard (fluoride) was added and the sample micronized. The micronized material was analysed by XRD utilizing a Panalytical Empyrean Diffractogrameter with PIXcel detector and fixed slits with Fe filtered CO-k alpha radiation. Phases were identified using X? Pert High score plus software. XRD analysis was used to determine the crystalline mineral phases present in the sample. The abundance of each phase (weight %) was determined by the Rietveld Refinement method. An orientation specimen was prepared from each of the samples, the head and the clay (

Closed

GLP Toxicology Laboratory needed for petroleum/oil based organic pesticide testing:GLP tests in terms of Toxicology and Residue analysis.Please provide quotation

Closed

Metropolitan New Jersey area laboratory needed for Butane Gas Testing for purity, aromatics, benzene, olefins per ASTM D2163 and sulfur per ASTM D6667-10. Two samples will be submitted each month through the winter.

Closed

Chicago area analytical chemistry laboratory needed for AOAC testing for peroxide on vegetable oils using AOAC 965-33 or equivalent method in the Chicago area.

Closed

To be analysed for polyisobuleneamine as per ASTM method for PIBA spcification for further information we will give you spcification for the same.

Closed

Materials laboratory needed for thermal conductivity testing of thermal paste used in computers, and we need to measure the actual thermal conductivity for the sale of goods. Currently developed several modifications to the calculated thermal grease thermal conductivity in the range of 0.7 - 6 W / (m * K).

Closed

Materials laboratory needed for analysis of particulate formation in natural oil wood finishes. We are having some particulates forming that we need to determine what is happening and ultimately how to prevent this in our manufacturing process.

Closed

Large petroleum company needs materials laboratory for ASTM Testing of terephthalic acid to ASTM methods

ASTM D8031-16 ? Acid number for TA by potentiometric titration ASTM D1209-05 ? Color of clear liquids (Pt- Cobalt Scale)

Please provide

- Cost/analysis - Turnaround - Sample amount required

Closed

Laboratory needed for ASTM Testing of upgraded athabasca bitumen to astm d 2887, Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography4530, 5291, 2007 and 4052

Closed

Laboratory needed for Feasibility study for syn-gas production using a new catalyst, Catalytic activity of NixA1BEA and NixSiBEA. Fixed bed reactor with a fixed total gas flow run until catalyst activity is significantly reduced First test: a 2:1 molar ratio CH4 and O2 Second test: a typical LNG gas run with similar carbon ?C? to O2 molar ratio Third test (optional): a typical natural gas mixture with similar carbon ?C? to O2 molar ratio We only provide the catalyst

Closed

Cosmetics company needs analytical chemistry laboratory needed for Deformulation Testing of Lip Balm to know the percentage of each ingredient in the product.

Closed

LONG-TERM TESTING NYC Metrolpolitan area Laboratory needed for ASTM Testing to Test Butane properties (purity, aromatics, benzene, olefins) per ASTM D2163 and Sulfur per ASTM D6667-10

Closed

Medical Device Laboratory needed for testing to develop methods for airway obstruction / choking hazard analysis

Closed

Oil technology development company needs toxicology laboratory LC 50 and LD 50 testing with some controlled versions of HF acid. Essentially, the blends we want to test are compounds that control the acidity of HF and show an ambient pH value of as high as 4 or 5 in aqueous solutions.

We are interested to know if your firm can help us carry out this kind of testing to effectively prove that our controlled versions of HF are inherently safer than neat versions of HF acid.

We are looking for labs that can conduct both LD50 as well as LC50 testing for us.

Closed

European Union Pharmaceutical Sensory Laboratory needed for sensory testing: odor, color, taste preferences of oral care products compared to other commercial dental care products.

Closed

India materials laboratory needed for diaper testing: 1- measuring absorption under load(AUL)in diaper 2-the analysis method for monitoring distribution of super absorbent polymers in diaper

Closed

Analytical chemistry laboratory needed for Osmolality testing for a personal lubricant product.

Closed

Petrographical Analysis on 10 samples of Feldspar Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Clay Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Kaolin

Closed

Environmental toxicology laboratory needed for TCLP Testing: Toxicity characteristic leaching procedure TCLP metals

Closed

LONG-TERM TESTING Oil Laboratory needed for long-standing motor analysis for metal and physical properties on motor oil performed every 30,000 miles.

Closed

Fuel system company needs laboratory experienced in aggressive fuel fuel system compatibiligy for chemical analysis of sour/contaminated gasoline to detect presence of the following: - POM plastic - stainless steel - flourocarbon elastomer - flourosilicon elastomer - 90copper-10Ni brass - copper conductor - conductor insulation (Electrisola I220) - filter mesh (we can give you a raw sample and/or maybe a more helpful description) An estimate of the relative amounts of contaminants would also be helpful.

Closed

Laboratory needed for ASTM engine coolant testing to ASTM D7304, Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

Closed

Oil Laboratory needed for gas testing to be done on the gas sample with operating pressure 80 ? 124 Kg/cm2g & Operating temperature 152 Deg C (Temperature will become ambient due to equalization with surroundings). . Please find the brief description about the Gas sample

Brief Description about Gas Sample : The well fluid is directly coming from the wells mostly consists of Condensate, Gas & H2O at operating pressure of 124 kg/cm2g & operating temperature of 152 Deg C. This Gas sample is from the common production manifold where well fluid from all the respective wells join and send to further processing.

Closed

Petroleum laboratory needed for Texas Department of Transportation Testing to Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS - Test for water content, % by mass.

Closed

Petroleum research & development laboratory needed for natural gas treatment research study. Our requirement is to check the efficiency of chemical for H2S Scavenging for crude natural gas. The natural gas stream contains H2S Concentration in crude natural gas is 150 PPM, The same needs to be treated by the chemical to achieve 0-5 PPM of H2S after treatment.

Closed

Contract laboratory needed for clay analysis on clay mineral content by XRD ANalysis. For X-ray analysis, particle size analysis will be carried out on each sample to separate and prepare the clay fraction for the analyses. Samples will be prepared for XRD Analysis using a back loading preparation method. 10 % internal standard (fluoride) shall be added and the sample micronized. The micronized material will be analyzed by XRD utilizing a Panalytical Empyrean Diffractogrameter with PIXcel detector and fixed slits with Fe filtered CO-k alpha radiation. Phases will be identified using X? Pert High score plus software. XRD analysis will be used to determine the crystalline mineral phases present in the sample. The abundance of each phase (weight %) will determined by the Rietveld Refinement method. An orientation specimen will be prepared

Closed

Oil Laboratory involved in proficiency testing needed for petrol analysis, diesel for distillation characteristics using optidistil

Closed

LONG-TERM TESTING Analytical Chemistry Laboratory needed for AOCS Analysis for Oxirane Oxygen, AOCS Official Method Cd 9-57

Closed

Clinical Research Organization needed for clinical research study of 10 toothpastes in EU: cleaning effect effect of desensitization inflammatory effect deodorizing effect anticavities (anti tooth-decay) effect remineralizing effect hemostatic effect sensitizing and allergenic effect antimicrobial effect whiterning effect antioxidative effect effect of pH-normalized oral balance measuring the viscosity of saliva before and after use What will be the price and the time of this clinical research? (some tests may be in vitro or used 3D models or clinical research) Please specify the price of this study.

Closed

LONG-TERM TESTING Environmental Laboratory needed for Lithium testing in clay

Closed

Environmental laboratory needed for mineral analysis of clay powder. Please specify charges.

Closed

Materials laboratory needed for ASTM or IEC Dielectric Constant Testing for Quench Water, Gasoline, Steam Condensate, Hydrocarbon, and other refineries/petrochemical product.

Closed

Packaging Laboratory needed for packaging certification testing as Child Resistant according to 16 CFR 1700.20, Testing procedure for special packaging.

Closed

Analytical chemistry laboratory needed for MSDS testing for Charcoal

Closed

Pharma researcher needs virology laboratory for antiviral testing of acyclovir formulation with herpes simplex virus or influenza virus for our project work with nanoparticles.

Closed

Large oil company needs Materials Laboratory for ASTM Testing of Polyurea Electric Motor Grease that requires the ASTM D3336, High Temperature Bearing Test.

Closed

Analytical chemistry laboratory needed to test 3 lavender oil samples by GC and MS

Closed

Analytical chemistry laboratory needed for quality and safety testing of moroccan oil

Closed

Large corporation needs materials laboratory for polymr analysis: degree of polymerization of cotton fiber by Gel permeation chromatography GPC (with detailed distribution of MW)

Closed

Oil Laboratory needed for Petroleum coke testing

Closed

Cosmetics laboratory needed for Certificate of Analysis Testing for bath bomb fizzies.

Closed

Nutritional supplement company needs analytical chemistry laboratory needed for comparison study on sugar levels of coconut water powder (sugar content) and find the equivalency

Closed

Oil laboratory needed for petroleum and oil testing. Checking mixed xylene and n-Heptane for sulphur content and tetra ethyl lead content

Closed

ISO 17025 Laboratory needed for baby shampoo testing for MDMD hydantoin content in a baby shampoo.

Closed

Oilfields company needs Materials laboratory for Chemical Testing and Mechanical Testing for polyurethane roller material

Closed

INDIVIDUAL Oil laboratory needed for tribology testing of fuel

Closed

Medical Device laboratory for identification testing for the detection of cutting oil (mobilmet 766) on dental implants

Closed

Medicinal chemistry laboratory needed for plant extract testing: Radical scavenging and antioxidant activity of hibiscus rosa sinensis extract . Particaulary dpph test . Total phenol test. Total proanthocyandin test .

Closed

Oil Laboratory needed for bitumen analyses: Dynamic viscosity at 60 oC EN 12596 Fraass breaking point EN 12593 Kinematic viscosity at 135 oC EN 12595

Closed

LONG-TERM TESTING Company seeking leading Petroleum Laboratory for Petroleum Testing Laboratory for Gas/Petrol Stations

Closed

Analytical chemistry laboratory needed for HPLC, SEM, or FTIR soap testing for Identification of white powder being formed soap bars being manufactured in large quantities after the curing process. The white powder just started forming after larger amounts of organic caffeine was added during the mixing process and the soap bars are curing for more than 48 hours. Pictures can be provided with a basic microscopeexam with 1,000x magnification to determine that this powder was not mold, however, the lab I used does not have HPLC, SEM, or FTIR available for further testing.

I believe that the white powder could be either soda ash (sodium carbonate) or possibly caffeine, since we add organic caffeine powder to the soap bar. A quick Google search reveals that many lye soap manufacturers have issues with a white powder on their soap bars whi

Closed

START-UP Personalcare company needs Materials laboratory for Product Safety and GMO Testing of materials in tampons to understand if material is GMO (if cotton) vs organic, and presence of toxins or pesticides.

Closed

Europe FDA Laboratory needed for personal lubricant testing to be in compliance for submission with the FDA. Please specify the price and how long it will take

Closed

FDA GMP Food Laboratory needed for formulation and manufacturing process development of milk made from sesame seeds (developing and customizing formulation), with all the high quality control standards including labeling and regulatory guidelines set out by the Food and Drug Administration (FDA).

Kind Regards, Adriana Contreras Cel. 954-6329008

Closed

Oil Laboratory needed for Sulfur content testing of diesel fuel

Closed

Large Petroleum Company needs Oil Laboratory for Impurity Testing by Gas Chromatography - Mass SpectrophotometryGC-MS for 1 sulfur impurity in iso-octane

Closed

Microbiology Laboratory needed for ASTM bacteria resistance testing on a lubricant according to ASTM E2275, Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance.

Closed

Contract Research Laboratory needed for Product development and Prototyping of an adhesive application/device in high temperature edible oil environment that meets specific performance objectives including time release which can be discussed under NDA.

Closed

Analytical chemistry laboratory needed for Flash point testing

Closed

India conglomerate needs industrial hygience laboratory to conduct air & water quality testfrom 4 different places. Air samples to be collected and one water sample for testing. Please give quotation for the same.

Closed

Coconut oil manufacturers needs US analytical chemistry laboratory for coconut oil testing. Please specify timeframes for how long it will take.

Closed

Consumer Product Safety Laboratory needed for safety assessments of handmade soaps to EU standards.

Closed

Oil Laboratory needed for lubricant testing: Quantitative Spectrophotometric Analysis QSA and RULER (Remaining Useful Life Evaluation Routine,

Closed

Laboratory needed for multiple testing on hand sanitizer 1. Glove Compatibility: The influence of Instant hand sanitizer on nitrile and latex gloves was tested using a modified ASTM D-5151 method. 2. CHG Compatibility: The compatibility of Instant hand sanitizer with CHG was tested using appropriate methods. 3. Non-food Tainting: tested according to ?Sensory Analysis-Methodology-Triangle Test BS EN ISO 4120:2007. 4. Skin Compatibility Test: The 48hr Single Patch Test 5. UL ECOLOGO Standard UL 2783. 6. USDA BioPreferred. 7. NSF E3 Certification Also recommend any other appropriate tests available and testing charges

Closed

Analytical chemistry laboratory needed for petroleum wax testing

Closed

Analytical chemistry laboratory needed for Triethanolamine Determination and quantification by GC and HPLC

Closed

Materials laboratory needed for ASTM D7419-13 testing Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

Closed

Contract Lab needed for SPF validation testing for SPF claims for sunscreens

Closed

LONG-TERM TESTING ISO accredited Privately held, Third-party laboratory needed for petrochemical testing by standard test methods for 'ethanol mainly for fuel applications.

Closed

Materials laboratory needed for biodegradability testing to determine the biodegradation of organic solvents, Please specify costs and timeframe.

Closed

Company developing new Organic and Natural product in the Baby personal, cleaning, food, diaper categories needs consumer products laboratory for third-party certification, reliability, efficacy and toxicity testing.

Please specificy your service offering and prices.

Closed

Large corporation needs Physical Laboratory for Need bulk sample (~1,800-lb) jaw crushing of 12 x 6 dia. consolidated wet mix material (silica-alumina matrix) to 1/2 - 1 size.

Closed

LONG-TERM TESTING Fracking company needs analytical chemistry testing for Sodium chloride testing for purity and contaminants

Closed

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines Property Values Test method Tensile strength 12 N/mm2 BS 2782 Elongation 300 ASTM D 1000 Tear resistance >50 ASTM D1004 Adhesion to steel >2 ASTM D1000 Adhesion to Self >1.8 ASTM D 1000 Impact resistance >15J DIN30627 Dielectric strength >30000 total systemASTM D149 Insulation resistance2.5x1012 Ohm.cm ASTM D257 Water Absorption <0.1% ISO 62 Water permeability 0.01g/100inch2/24h ASTM F1249 Bacterial Growth - No Mic

Closed

Analytical Chemistry Laboratory needed for Essential oil testing for added chemicals in cinnamon bark oil

Closed

Shipping vessel owner needs Spain laboratory for bunkered fuel analysis ?Asphaltenes, Ash, Carbon Residue ?Density, Flashpoint ?Sulfur Content, Hydrogen Sulfide ?Microbes Contamination ?Pour Point, Stability ?Total Sediment Potential (TSP) ?Viscosity, Water Content ?ISO 8217 Bunker Fuel Testing ?H2S Testing for Bunker Fuels ?Bunker Fuel Chemical Contamination Screening ?Chlorinated Compound Contamination of Bunker Fuel

Closed

Food laboratory needed for Smoke point testing of edible oil blend

Closed

Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equipment for electrical repair would need certified inspections . Our protective gear and equipment that needs required certified inspections under NEC would be involved also.

Closed

Materials laboratory needed for ASTM and Lubrizol Testing for Test cloud point of water soluble ethoxylated product. Cloud point of a liquid detergent formulation to ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

Closed

LONG TERM TESTING Analytical Chemistry laboratory needed TGA (Thermo Gravimetric Analysis) of various chemicals. The samples frequency per month will be 4-5. Please offer us most competitive price in order to allot you this work.

Closed

Laboratory needed for DOT Jerrican (2.2-gallon portable fuel container) Testing per Department of Transportation (DOT) ?Subpart M: Testing of Non-Bulk Packaging and Packages CFR / I / C / 178 ? Specification of Packages, Sections 178.603, 178.604, 178.605, 178.606, 178.608 and 178.609

Closed

Consumer Products Safety Laboratory needed for safety and quality testing of Baby Diapers prior to importation from China.

Closed

Consumer Products Laboratory needed for baby lotion testing to ensure it is safe to use and hypoallergenic.

Closed

Laboratory needed for SPF In-vitro testing by the European Cosmetics Association, COLIPA 2011 guidelines

Closed

Oil Laboratory needed for sulphur testing in transformer oil to ASTM Test method D 1275 B, Corrosive Sulphur Test

Closed

Large petrochemical company needs laboratory for measurement of the accurate density of a molten solid. The density of a molten solid (melting point of 185C) is needed between 195C and 230C. The density at 200C is approximately 1.14 gr/cc. It is estimated that the density at 210 will be ~1.13 gr/cc. The measurement ideally be good to three decimal points. Error limits on the measurement is also desired. Is the measurement even possible if the container used for the device expands at these temperatures?

Closed

Laboratory Consultant needs Medical urine testing (red and white blood cells) for pain mgmt.

Closed

USA Microbiology Laboratory needed for microbiology testing: Microbiology count and identification on a emulsion sample (metal working fluid).

Closed

Maryland certified laboratory needed for petroleum fingerprinting

Closed

Refined lipids company needs sensory laboratory for sensory taste comparison testing on two oils for several quality aspects including taste.

Closed

Analytical chemistry laboratory needed for biodiesel testing. Analysis of the composition of biodiesel B5 95 % diesel 5% biodiesel

Closed

India consumer products laboratory needed for development testing on herbal mosquito repellent voporizer to adjust the evaporation rates. Currently essential oil smell not evaporated from veporizer. There is no equal evaporation from veporizer liquid. Some residue remain.

Closed

Analytical Chemistry Laboratory needed for chemical analysis to determine composition of butyl reclaimed rubber to be able to assess the registration requirements of the EU REACH Regulation.

Closed

Analytical chemistry laboratory needed for USP Testing of petroleum jelly to USP method standards

Closed

Contract Lab needed for Toothpaste Testing Tests required: Microbiological, heavy metal, Pork Lard, Triclosan

Closed

India NABL Laboratory needed for natural gas testing of Calibration standard gas mixtures for natural gas analysis on gas chromatographs as per NABL accredition

Closed

India laboratory needed for lubricant oil testing

Closed

Petroleum company needs NABL Accredited Laboratory for grease testing as per Indian Standards IS 507 : 1993 Grade 2 (https://law.resource.org/pub/in/bis/S11/is.507.1993.pdf) : 1. Glycerine content, percent by mass, MAX 2. Low temperature pumping properties 3. Water content, percent by mass, MAX 4. Corrosion preventive test, Max NABL Accredited Laboratory required.

Closed

UK cosmetics laboratory needed for full quality control testing and analyses needed for the soap industry including all raw materials (oil, water...) and finished products to to assure that the soap production is controlled and meet the EU standards and regulations

Closed

Natural and organic skin care products (scrubs, oils) company needs laboratory for microbiological testing and safety assessment testing

Closed

University research student needs Nanotechnology laboratory needed for fluorescence microscopy and/or TEM.

Closed

LONG-TERM India Laboratory needed for natural gas analysis on regular intervals as per OEM guidelines like hydrocarbons, CO2, nitrogen and contaminants in natural gas.

Closed

Small business needs Canada food laboratory for cottage cheese Testing for food quality, nutrition and label

Closed

NYC food laboratory needed for Nutritional Facts Labeling Testing for a cold pressed juice product

Closed

Medical Institute needs India Bioanalytical Laboratory for protein analyssis: disulfide bridge mapping of protein. Please specify cost.

Closed

Dairy company needs food laboratory for Proteolytic count analysis

Closed

Clinical diagnostic laboratory needed that provides mail-in STD Testing services for blood, swabs and urine samples for:

1. Chlamydia 2. Gonorrhea 3. Hepatitis C 4. HIV 1 & 2 5. Trichomoniasis 6. Herpes Simplex 1 7. Herpes Simplex 2 8. Syphilis 9. Hepatitis B 10. Hepatitis C 11. Gardnerella Vaginalis (Bacterial Vaginosis) 12. Mycoplasma Genitalium

Closed

Importer of frozen ice confection product needs Canada Laboratory for milk fat content testing of 8 different products: fatty acid profile through gas chromatography - which will serve to differentiate one type of fat from another.

Closed

Certified Materials Laboratory needed for coating testing of Three (3) mixed adhesive coating samples tested for the following: 1. Volatile Organic Compounds (VOC) content per ASTM D-3960, Section 8.2.4. (Determining Volatile Organic Content of Paints & Related Coatings) and/or SCAQMD Annex to ASTM D-3960) 2. Weight Fraction of non-volatiles (solids) per ASTM D-2369-81 (Volatile Content of Coatings). 3. Density of coating per ASTM D-1475 (Density of Paint, Varnishes, Lacquer, and Related Products).

Closed

Medical Device Company needs Medical product safety laboratory accepting quotes for conducting biocompatibility testing of a (laminated) fabric sample to ISO Standards used in medical device: Cytotoxicity ? ISO 10993-5 Sensitization ? ISO 10993-10 Irritation/Intracutaneous ? ISO 10993-10

Thanks in advance.

Closed

Chemical company needs North America GLP compliant laboratory for Methodology/Validation development for testing Strychnine 99% using HPLC chromatography with UV detection (or similar methods) and 5 production batch samples of Strychnine testing using the method developed as Methodology/Validation.

Closed

Opthalmic Medical Device Company needs Europe or USA Laboratory for determination of cyanide level on a medical device (electrode)

Closed

Geology Laboratory needed to provide a bid for the following cor analysis : porosity and permeability analysis of 15 1x2 cores (we supply the core); two (2) of those samples will also have MICP analysis after initial P&P results; 15 thin sections from 1x2x.25 billet (supplied)

Closed

LONG-TERM Canada laboratory needed for powder Carbon Black testing such as Iodine levels

Closed

India oil laboratory needed for testing: flash point pour point density storage stability Octane number

Closed

Microbiology Laboratory needed to Identify Fungi & Bacteria in 1/2 ounce specimen Jars Some in water others dry Please provide cost

Closed

Fashion company needs a metallurgical laboratory for testing a few sterling silver jewelry pieces to determine their compliance with the .925 metal requirements. As well, determine the other 7.5% components. Thank you.

Closed

Laboratory needed for testing ABS Rings for ASTM D5001, Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

Closed

Laboratory needed for petroleum testing of three petroleum based samples that require the following analyses: Appearance (physical state, color, etc.); Upper/lower flammability or explosive limits; Odor; Vapor pressure;Odor threshold; Vapor density; pH; Relative density; Melting point/freezing point; Solubility(ies); Initial boiling point and boiling range; Flash point; Evaporation rate; Flammability (solid, gas); Partition coefficient: n-octanol/water; Auto-ignition temperature; Decomposition temperature; Viscosity; Reactivity; Corrosivity

Closed

Food laboratory needed for apple juice testing prior to exporting.

Closed

University Researcher needs laboratory for dairy products testing to evaluate their antibiotic and pesticide content. Please provide the approximate cost per sample?

Closed

USA physical chemistry needed for particle analysis and distribution testing of carbon black samples that range in size from o.2 micron up to 400 micron. particle distribution report will need to show mean, median, distribution curve and other industry standard outputs.

Closed

ISO 17025 Accreditated laboratory needed for Phthalate testing for a medical device

Closed

Clinical diagnostic laboratory needed for blood testing: Assay testing on 20 blood samples

Closed

High performance chemical company needs Toxicology laboratory for OECD Testing of chemicals to OECD 301D , Biodegradability

Closed

Research laboratory needed for alternative fuel testing and analysis in petrol spark ignition engine. Aternative fuels are alcohol fuels blended with petrol .

Closed

Jewelry manufacturer of gold or rhodium plated fashion jewelry over brass needs US Materials laboratory for material composition testing and plating thickness testing of these pieces.

Closed

Food analytical chemistry laboratory needed for Vitamin B1 analysis on grape must (or juice). Also please provide the following: - the lowest detectable limit your lab would provide - how much sample is needed and should it be sent cold, frozen, or not

Optional test of interest would be B6, is that an option?

Closed

Medical Device company needs laboratory for staining with Toluidine-blue on our samples (hydrogels) and pictures (5x, 10x and 50x) magnification.

Closed

Europe laboratory needed for Chlorate Analysis in Milk Products

Closed

Medical Technology laboratory needed for medical device testing to 60601-1 Medical electrical equipment?Part 1: General requirements for basic safety and essential performance

60601-1-2 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

Closed

USA Volkswaren approved automotive labs needed to test Al wheels for Cornering fatigue testing

Closed

Virology Laboratory needed for performance testing of an ultraviolet germicidal irradiation (UVGI) device used to kill H1N1 influenza virus deposited on respirator coupons. Experiments needed to evaluate the performance of the device using other viruses. We are requesting a quote to evaluate the performance of the device using the following viruses: H5N1 (low path); H7N9 (low path); H5N9; SARS; and MERS-CoV. We will provide the UVGI source and provide training on the method.

Closed

Large corporation needs textile laboratory to run some washing test on different uniforms from different suppliers including: Shrinkage Decoloring Performance Durability Stretching Between others

Closed

Textile laboratory needed for chemical analysis of textiles used in child's clothing, silk sheet sample (x2 potentially), 2 wool/silk blend carpets. please include cost per sampler, and how the testing will be done.

Closed

UK Analytical chemistry laboratory needed for ingredients testing in a sauce.

Closed

Analytical chemistry laboratory needed for testing for thioethers; methymercaptans; gliotoxins

Closed

Medical Clinic needs clinical diagnostic laboratory for surrogate patient OBGYN lab testing

Closed

Food laboratory needed for skim milk power testing to confirm the absence of Sodium thiocyanate as per customer request

Closed

Large dairy company needs Ireland laboratory for Edge Crush Testing on 3-4 box samples

Closed

Oil laboratory needed for ASTM testing of lube oil for ash, lead and water content to ASTM D874, E203, D5185

Closed

Medical Device manufacturer needs FDA GMP Product Safety Laboratory for Toxicology Testing to support FDA 510K application

a) A comprehensive scientific justification for the use of a additive containing heavy metals in a medical device b) Extractables and Leachables Testing on the final finished device, using an exhaustive extraction at 50oC for 72 hours in both a nonpolar and polar solvent c) A dermal risk assessment for each chemical extract characterized in the solvents following the Extractables and Leachables Testing

Pls comment on your proposal

Closed

Physical Laboratory needed to test the life of seal which is used for sealing pneumatic solenoid valve .

Closed

France University researcher needs histology laboratory for Immunohistochemistry on 1 slide (TMA) for research antibodies (already purchased or not, examples ALDH, SOX).

Closed

France university needs Histology Laboratory needed for Immunohistochemistry for anti-mitochondria antibody: send slide with tissue section (formalin fixed, paraffin embedded specimen).

Closed

South Florida Food Laboratory needed for hot sauce testing for Nutrition, bacteria level,and heat level of our hotsauce

Closed

Biophysical Laboratory needed for ISO Testing of medical implant. The material is Metal. It is to ensure that the design does not fail under standardized conditions for example ISO 9585:1990, Implants for surgery Determination of bending strength and stiffness of bone plates

Closed

AUtomotive Parts company needs Acoustics Laboratory in Saudi Arabia to perform sound testing of York centrifugal chiller

Closed

Midwest USA High complexity CLIA lab to perform LC/MS/MS urine drug testing on 1200 samples.

Closed

Germany Nutritional Laboratory needed for milk testing for aoac nutrional values to export to usa.

Closed

Asia automotive laboratory needed for wiring harness Crimping validation, etc., laboratory needed to conduct tests according to General Motors standards

Closed

Canada Analytical Chemistry Laboratory needed for confirmation testing. Test a sample of Lactic Acid 80% and verify that it is the exact same material as the CoA, Certificate of Analysis. Looking forward to your response. Thank you in advance

Closed

Analytical chemistry laboratory needed for Chemical compisation % of calcium carbonate baking soda and if other chemicals present. And mesh size of grind

Closed

Energy company needs laboratory for fuel testing. I have three samples (Light Ends, Solvent, and Industrial Diesel Fuel) that would require the tests the following tests: ? Appearance (physical state, color, etc.); ? Upper/lower flammability or explosive limits; ? Odor; ? Vapor pressure; ? Odor threshold; ? Vapor density; ? pH; ? Relative density; ? Melting point/freezing point; ? Solubility(ies); ? Initial boiling point and boiling range; ? Flash point; ? Evaporation rate; ? Flammability (solid, gas); ? Partition coefficient: n-octanol/water; ? Auto-ignition temperature; ? Decomposition temperature; and ? Viscosity ? Reactivity; ? Corrosivity All three samples are petroleum based.

Closed

LONG-TERM Clinical Diagnostic Laboratory needed for UTI and FISH testing.

Closed

Europe Textile Laboratory needed for linting testing on hygiene products to AMS 3819C standard Cloths, Cleaning, for Aircraft Primary and Secondary Structural Surfaces

Closed

Canada food analytical chemistry laboratory needed for pH Testing in hot sauces.

Closed

MICROBIOLOGY LABORATORY NEEDED FOR TIME KILL AND TESTING OF ANTIMICROBIALS

Closed

Large corporation needs USA or Canada textiles laboratory for textile fiber identification and type of nonwoven identification. It would be for product like baby diapers, feminine care pads, tampons, baby wipes etc.... so in the hygiene market.

Closed

Electrical Laboratory needed for testing of an electrothermic sensor according to the ECE R118 norm (fire protection)

Closed

India microbiology laboratory needed for fungus testing of some fungus developing on the walls of medical facility.

Closed

Medical Device company needs biomedical laboratory to provide a quote for CLSI EP07 Interference Testing in Clinical Chemistry on with Neisseria gonorrhoeae and Chlamydia trachomatis.

Closed

India laboratory needed for high speed diesel testing

Closed

Southern USA high-complexity toxicology laboratory needed for to process toxicology samples from 3 different treatment centers. Approximately, 500-1000 samples a month.

Closed

Microbiology laboratory needed for medical fabric testing for bacteria-resistance. It is nylon taffeta 70 denier with a pic waterproof backing. The same material used for mattress liners in hospital and nursing home settings. I m looking to getting more information s to what types of testing you would do, what certificates can be granted, and an estimate to the cost for these services.

Closed

Food analytical chemistry labroatory needed for Kombucha Testing for the turbidity of Kombucha beverage

Closed

Consumer Products Safety Laboratory needed for safety testing of 6ft high, rotating, wooden magazine display racks.

Closed

Food analytical chemistry laboratory needed for Caffeine testing

Closed

Materials Laboratory needed for ASTM Testing: ASTM Closed cup flash point test (Tag or Martens, etc.) on a thin liquid material. Estimated FP is 140 F. One sample will probably suffice.

Closed

University researcher needs India biomechanical laboratory for bone testing: 1) porosity 2) Mechanical test like compression and tensile.

Closed

USA plastics laboratory needed for resin testing for Molecular weight determination for an oligomer resin

Closed

USA analytical chemistry laboratory needed for organic content testing (TOC). The standard methods used for this testing are 5210B for CBOD and BOD, and 5220D for COD. My sample are clean and aqueous. Please provide me the following:

1. Standard & Rush turn-around time, and it's fee 2. Price 3. Sample amount 4. Quality System (GLP, GMP, ISO9001?)

Closed

AUtomotive parts company needs automotive laboratory for General Motors Testing to GMW14609 Corrosion, Simulated 3 g Occupant Load & Downward Strength Test.

Closed

USA Food laboratory needed for shelf life testing on two or three beverages and caffeine content testing of another. Also would like prices for shelf life testing on two or three other beverages.

Closed

US Microbiology Laboratory needed for EN ISO Microbial Analysis to EN ISO 22612 Dry Micobial Penetration test

Closed

Analytical Chemistry Laboratory needed for LC-MS data analysis from Toxicology screenng a

Closed

Performance laboratory needed for moisture management testing on footwear, e.g. the SATRA TM376 test, with the SATRA STM567 test machine (endofoot), where conditions of use is simulated by generating sweat at a given rate, and setting a temperature of the foot form/mold/insert. Please provide quote for testing 2 pair of shoes (1 pair coated, 1 pair uncoated)?

Closed

India Microbiology Laboratory with ISO/IEC 17025 NABL Accredition needed for bioburden testing, bacteriostasis and fungistasis testing

Closed

Microbiology Laboratory needed to test anti-biofilm activity of titanium discs uncoated and coated with a polymer. I need 3 assays with titanium discs uncoated and coated with a polymer to verify anti-biofilm activity for anaerobic bacteria involved in peri-implantite.

Closed

Doctorate Medical Researcher need bioanalytical laboratory for experimental procedure: The requirement to get rat hippocampus microdialysis samples analyzed for glutamate and GABA by HPLC using the same method used in the attached publication of our lab (we have 120 samples that need to be analyzed). The experimental procedure is essentially the same as in the attached publication. Please the cost of the per samples analysis.

Closed

Gastroenterology Preclinical Product Safety Contract Research Organization (CRO) needed for weight loss study with capsule inserted in the stomachs of 6 genetically obese mice and then have mice observed for weight loss.

Closed

Automotive Laboratory needed to conduct tests according to General Motors standards: GMW: 3205 - Odor , 3232-Flammability , 3235-Foggong , 3259-Mildew growth , 15634-Interior Emissions , 15063-Material Sepc.

Closed

USA Materials laboratory needed for ASTM Testing for melt point determination to ASTM D789, and dimensional stability. My sample is type 66 molybdenum disulfide-filled nylon. Could you provide me the following:

1. Pricing 2. Standard and rush turn around time, and its fee.

Closed

Analytical laboratory needed for wide rande hydrocarbon gas chromotagraphy to determine gas composition test on the natural gas coming from gas field for composition of the hydrocarbons right up to C16, the Gross and Net Heating Values of the gas, the Molecular Weight, the compressiblity factor and the adiabatic coefficient.

Closed

India contract test laboratory needed for biodiesel testing from various palm oil and waste oil

Closed

Eye wear company imports eyeglass frames from Italy and would like FDA GMP laboratory for certification testing that frames are made from FDA approved raw materials.

Closed

India Laboratory needed for Poly tetra flouro ethylene testing to issue &certified authority products is free from Transmissible Spongiform Encephalopathy declaration.

Closed

Materials Laboratory needed for biodegradability testing of lab that an antifoam to determine if it is biodegradeable.

Closed

USA Materials Laboratory needed for ASTM Testing: gel content of polyethylene samples using ASTM D2765-11, Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics (xylene or Decalin extraction, boiling solvent, sample in wire mesh cage, weight loss after 6-12 hours in boiling solvent, then vacuum oven).

Closed

Large engineering company needs middle eastern laboratories that can determine the effectiveness of proposed asphaltene inhibitor chemicals at specified operating conditions using well samples and other well chemicals

Closed

Polymer laboratory needed for molecular weight testing by mass spec analysis of the polymer. It is new inert ingredient submission to US EPA under their low risk polymer exemption rule.

Closed

Automotive company needs Flammability testing on automotive brake clean aerosol formula

Closed

Medical Device Company needs laboratory to provide quote for testing of DEHP, Latex and Phthalates on catheter. Catheter is composed from various materials: Gray Pellethane - proximal hub, Yellow - pellethane - body, Air valves - PVC, Blue & yellow Pebax - distal end, Grey Pebax - distal hub.

Closed

Third-Party Laboratory needed for shoe testing to American Podiatric Medical Association's Seal of Acceptance for children's shoe lines. The APMA requires that we submit our shoes to third-party lab tests to establish the product?s safety (including a Material Safety Data Sheet and EPA/FDA approval documents where applicable), as well as other health-related properties, such as the product being lightweight, very flexible, and slip-resistant.

Closed

Petroleum company needs laboratory capable of testing Jet Fuel samples to detect the presence of additives specifically Metal Deactivator Additive and Thermal Stability Improver Additive. 8 samples

Closed

BEVERAGE COMPANY ROLLING OUT NEW PRODUCT WITH CULTURED YOGURT.NEEDS FOOD MICROBIOLOGY LABORATORY FOR NUTRIONAL LABELING TESTING TO LABEL PROBIOTIC OR PREBIOTIC.

Closed

Medical Device Company needs laboratory for Particle count testing in accordance with clause 14.2 of EN 45502-1:1997, Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer.

Closed

Design and Engineering company needed laboratory for sandwich panel testing:

1) Test Sample :- Aluminum Honeycomb Sandwicu Panel 2) Material :- 1) Aluminum Sheet 2) Honeycomb Core (Alu) 3) Adhesive Glue 3) Test Parameter :- 1) AGING (Specification -ISO 9142 - D3 - 21 CICLI) 2) SHEAR STRENGHT (L-direction) (Spec-DIN 53294) 3) SHEAR MODULE (L-direction) 4) SHEAR STRENGHT (W-direction) 5)SHEAR MODULE (W-direction)

Closed

Microbiology laboratory needed for pyrogen testing for a medical device and components. the active ingredient is photosensitive and testing under yellow lighting would be required. None of the materials used in the device have radioactive properties

Closed

Lighting company needs UKAS accredited laboratory for emergency lighting testing of battery

Closed

Chemical company needs microbiology laboratory for microbial analysis:Microbial Bacteria count = less than 1000 cfu/ml

Pathogen - E.coli = should be absent

Pathogen - Salmonella = should be absent

Pathogen - Staphylococcus aureus = should be absent

Pathogen - Pseudomonas Aeruginosa = should be absent

Closed

USA Automotive laboratory needed for SAE and ASTM Testing: Compression Stress Relaxation Test SAE J2979 + Low Temp Brittleness ASTM D2137

Closed

India NABL accredited laboratory needed for abs and san plastic product materials testing

Closed

Hong Kong laboratory needed for test equipment testing

Closed

Food analytical chemistry laboratory needed for analysis to ascertain the amount of caffeine in a variety of liquids. Would submit ~10-15 samples for comparison

Closed

Physical Laboratory needed for NFPA fire rating testing of metallic cable trays ( hot dip galvanized) in conformity to NFPA 130. Fixed Guideway Transit & Passenger Rail Systems

Closed

Materials laboratory needed for Thermal Conductivity testing of DIN EN ISO 8497 for our rubber insulation

Closed

STUDENT Analytical chemistry laboratory needed to test the behavior of rosin, beeswax, glycerin and graphite blends and whether or not graphite can be replaced with organic powdered pigments such as tyrian purple or dragon's blood to alter the color of the final blend.

Closed

University Scientific researcher needs a Middle East laboratory for conducting science experiments on fuel cells including preparation and characterization of cathode materials based oxides and thin layer of doped and undoped by chemical and electrochemical method for fuel cells, for a thesis entitled: synthesis and characterization of the doped and undoped ceria electrochemically.

Closed

Nutraceutical company needs laboratory for analysis on standardized mushroom extracts to check the standardisation of the active constituents specified by our suppliers. The main standardised active constituents of mushroom extracts are mushroom polysaccharides and triterpenes.

Closed

Food laboratory needed for food contact surface testing for FDA 176.170 CERTIFICATION FOR OUR EMULSION POLYMER WHICH IS USED IN COATING THE BOARD USED FOR PACKAGING OF LIQUIDS like FRUIT JUICES

We will be sending you the list of inputs in our polymer emulsion so testing may not be required.

Closed

Automotive Laboratory needed for SAE Testing of automotive senders (hall effect transducers) tested to SAE J1226, Electric Speedometer SpecificationOn Road and SAE J1399, Electric Tachometer Specification

Closed

University Scientific Researcher needs Contract Laboratory for conducting science experiments for Research Study on comparison of synthetic oil to common crude oils. Methods for the conversion of lignites, subbituminous coals and other carbonaceous feedstocks into synthetic oil are researched. The results are expected to be compared to the results of other experiments.

Closed

India materials laboratory needed to perform Tests required for Material of Gland Packing. Glass Ply OR Carbon Fibre Ply, Silicon OR Made of Ceramic Fibre. FT - IR Analysis require.

Closed

USA Contract Laboratory needed to provide Polynuclear Aromatic Hydrocarbon (PAH) testing according to EPA 8310. It involves determining the concentration of PAH in ground and wastes using HPLC. The sample is graphite powder. Could you provide me the following information:

Price per sample Minimal sample quantity Turnaround option (standard and rush, what surcharge) Shipping address

Closed

Materials laboratory needed for IEC electrostatic testing of polyethylene sheet to to IEC 61340-4-4, Electrostatics standard for its electrostatic properties.

Closed

FDA GMP Polymer Laboratory needed to assist to file GRAS and/or FCN for our product(s), as well as capable in conducting all the FDA required test in order to obtain the FDA approval on polymer product.

Pls enlighten us on the details of phases/process, analysis, cost and lead time.

Closed

Analytical chemistry labroatory needed for formulation and testing of new tea product.

Closed

Contract Laboratory needed for testing to EN1621-2 Level 2, Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits

Closed

Bioanalytical laboratory needed for bioanalysis on Stromal Vascular Fraction cells isolated from adipose tissue including Residual collagenase activity (colorimetric assay kit available) Bioanalytical laboratory needed for Flow cytometry (CD31/Cd34/CD45) Endotoxin testing Colony forming unit- fibroblast (CFU-F) assay

Closed

Contract laboratory needed for radiation test in hydrocarbon samples. Below is some information about the samples

Propane samples ,which is a liquefied petroleum gas (LPG), will be pressurized hydrocarbons gas in liquid state. The samples are in a steel sample cylinder. Vapors samples, which is mainly consists of Methane, Ethane and a little of Propane plus, could be (or not) pressurized hydrocarbons in vapor or gas state. The samples are in a steel sample cylinder. Natural Gasoline samples, which is a liquid hydrocarbons in atmospheric pressure, are in a Boston bottles.

For Propane and 3 inlet vapor samples:

? Gross Alpha ? Gross Beta ? Radium 226 ? Radium 228 ? Strontium ? Thorium ? Uranium

For one liquid natural gasoline sample:

? VOC ? SVOC ? RCRA metals including Hg+ ? Radium 226 ? Radium 228 ? Gamma

Closed

Analytical chemistry laboratory needed for Bromate testing in water solution.

Closed

INDIVIDUAL Oil laboratory needed to test to car engine oil for Oil quality, Oil age, approximate usage, . I would require a written statement into age of oil, how long approximately have been used, and test of quality? This is a Land Rover genuine part. I would provide sample of brand new oil vs a test to an oil used in the car to determine if they match?

Closed

Analytical Chemistry Laboratory needed for FCC Testing: Oxyethylene detemination as stated in FCC 9 Page 1434 or a certified method capable of the same determination.

Closed

Industrial milk company needs Eastern Europe agriculture laboratory needed for roughage testing and manure testing. What is the price and conditions of testing? What are your testing parameters? What the minimum amount of material and packaging is necessary for research sample?

Closed

Physical Laboratory needed for SAE testing: solar radiation test as per SAE J575-2010, Test for Motor Vehicle Lighting Devices and Components

Closed

Materials laboratory needed for f PROPYLENE GLYCOLtesting for appearance, PG content, moisture, density, index of refraction, acidity, distillation range, color (Pt ? Co).Please provide the price of this analysis? What the minimum amount of material and packaging is necessary for research sample?

Closed

ISO Accredited ISO/IEC 17025 Mechanical Laboratory needed for full testing of brake pads/liners as per GSO ECE 90? Please adviseon the testing charges, TAT, Sample requirements for testing and other details, if any. Also please advise whether your Laboratory is accredited by ISO/IEC 17025?

Closed

India analytical chemsitry laboratory needed for F493 test certificate testing for CPVC cement solvent

Closed

LONG-TERM ONGOING: UK or Denmark GLP Laboratory needed to obtain a quantitative determination of the following components : ? Dipalmiotylphosphatidylcholine (PC16:0/16:0) ? Total Sphingomyelin (SMtotal) ? Total Phosphatidylcholine (PCtotal) ? Total Phosphatidylglycerol (PGtotal) ? Phosphatidylinositol (PItotal) We prefer to use the concentration unit of nmol/ml, and expect that the components are present in the following concentration ranges : ? PC16:0/16:0?0,5 - 150 ?nmol/ml ? SMtotal?0,1 - 40 ?nmol/ml ? PCtotal?1.0 - 500?nmol/ml ? PGtotal?0,3 - 50?nmol/ml ? PItotal??2 - 30 ?nmol/ml

Closed

Eastern Europe medical device laboratory needed for Personal Lubricant Ge testing. Two tests; 1) Condom compatibility test 2) Spermicid Test (Our product does not kill or kill sperm)

Closed

LONG-TERM Eastern Europe laboratory needed for long-term testing of injection, painting and chrome plating of plastic parts for automotive industry to automotive industry specifications.

Closed

Analytical Chemistry Laboratory needed for benzene testing of toys to potentially develop program going forward

Closed

Plastics Laboratory needed for ASTM Testing: Brittleness Temperature testing performed to ASTM D746 on thermoplastic urethane. I need baseline number so am looking at measuring 2 lots.

Closed

USA Analytical Chemistry Laboratory needed for quantitative analysis of Bromate content in Sodium Hypochlorite 12.5% solution at 3 µg/L level. Limit test type not acceptable.

Closed

Materials Laboratory needed that performs ASTM D6703, Standard Test Method for Automated Heithaus Titrimetry

Closed

Microbiology Laboratory needed for microbial testing of manufactured medical device parts for specific microbiological requirements. We are a contract plastic manufacturing company for medical products and have a specific test requirements. for

TAMC (Total Aerobic Microbial Count) -9999 0 200 cfu/gm STM-00412, STM-00411 Note 1 TYMC (Total Yeast & Mold Count) -9999 0 20 cfu/gm STM-00412, STM-00411 Note 1

Closed

Microbiology laboratory needed for microbiology testing on organic cold pressed juice product to ensure HPP has been effective and product is safe to be sold in retail stores.

Closed

Mumbai consumer products laboratory needed for incense stick testing for quality and fragrance.

Closed

Biochemistry laboratory needed for the following analyses in kelp; 1. Phosphonic acid 2. 2,4 D- Amine

Closed

Geochemistry laboratory needed for bentonite testing for the chemical composition and moisture.basically to ascertain the use of the bentonite

Closed

Toxicology laboratory needed for GLP toxicity testing such as acute oral toxicity test for new plastic polypropylene baby toys.

Closed

Preclinical Laboratory needed for in-vivo gastroenterology study to get a first estimation of the likelihood that a gastroenterology physical barrier might become twisted or entangled in some fashion that it could cause harm to the animal and my inference to any future human trials. Another objective is to identify any undesirable elements associated with food waste that has not had its nutrients removed in a normal manner.Need to have specially sized condom like sleeves emplaced in the stomachs of 6, genetically obese lab rats and then have their diets, weights, and stools monitored for two months. These condom like sleeves will be encapsulated in gelatin capsules. Once emplaced in the rat stomachs, they are expected to assume a round diameter two large to pass into the rat intestines. As food is pushed into the intestines, this condom l

Closed

Materials Laboratory needed for film testing of a film structure for testing outgassing and refractory Components.

Closed

URGENT Textile laboratory needed for Tests of CLO Value and GSM for polyester wadding of Sleeping Bag in lieu of 3 x Blankets as soon as possible.

Closed

Materials Laboratory needed for analysis for total chlorine content on DVB-Styrene crosslinking gel samples.

Closed

URGENT Automotive Laboratory needed to Evaluate automotive products as per Toyota standard.These tests are Characteristics Test, Heat Resistance Test, Water Resistance test, Strength test...etc.Please specify if your laboratory has th facilities to conduct tests as per Toyota Engineering Std? Please let me know your feedback ASAP .

Closed

Universitry Researcher needs clinical diagnostic laboratory for blood testing for Palladium toxicity in patient.

Closed

H2S compatibility test for water based mud lubricant used in oilfield. Product needs to be exposed H2S gas to see the product's reaction towards the gas. Target is to see if the product is compatible and good to use in sour gas environment. I am looking for a quote for this test.

Closed

Medical Device Laboratory needed for EUropean Pharmacopeia Testing of Surgical threads to European Pharmacopeia [8.0] Monograph 01:2008:0324, IDENTIFICATION For (Silk sutures) Identification of silk: A. Dissect the end of a suture, using a needle or fine tweezers, to isolate a few individual fibres. The fibres are sometimes marked with very fine longitudinal striations parallel to the axis of the suture. Examined under a microscope, a cross-section is more or less triangular to semi-circular, with rounded edges and without a lumen. B. Impregnate isolated fibres with iodinated potassium iodide solution R. The fibres are coloured pale yellow. For UNILIN (Linen Sutures). Identification of linen A. Dissect the end of a suture, using a needle or fine tweezers, to isolate a few individual fibres. Examined under a microscope, the fibres are se

Closed

ISO 17025 accredited Medical Device Laboratory needed for ASTM Testing of Hernia Mesh - 3 types (Flexpro mesh, Polyester mesh, polypropylene mesh) ? Cotton Umbilical Tape. Tests required. 1. Stiffness Test as per ASTM-D1388-14. Test may be conducted with option-1: Cantilever or option-2: Heart Loop 2. Bursting Strength of Textiles - Constant-Rate-of-Traverse (CRT) Ball Burst Test as per ASTM-D3787-15 3. Breaking Strength and Elongation as per ASTM-6775-13 Please make sure your office is ISO 17025 accredited

Closed

Medical Device Laboratory needed for ISO Compliance testing on Temporary Cardiac packing wire & Stainless steel wire). 1. Compliance verification report for Temporary Cardiac Pacing Wire as per EN 60601-1:2006/A1:2013, EN 60601-1-2:2007/AC:2010, EN 60601-1-6:2010 2. Chemical Composition Test Report for Temporary Cardiac Pacing Wire as per BS ISO 5832-1:2007 3. Mechanical Properties Test Report for Temporary Cardiac Pacing Wire as per ISO 10334:1994 4. Chemical Composition Test Report for Stainless steel wire as per BS ISO 5832-1:2007 5. Chemical Composition Test Report for NEEDLE as per ISO 7153-1:1991 & ISO 13402:1995

Closed

California packaging laboratory needed for beverage packaging testing of new beverage formulation (given in small dosages e.g. 30 ml i.e. shot). My formulation does not include preservatives. I would like to test the formulation to see which packaging material will be the best.

Closed

United States Textile Laboratory needed for fabric testing for UPF protection to AATCC and ASMT testing methods: UPF Product Testing - AATCC 183, ASTM-D6544, ASTM-D6603. Please let me know pricing.

Closed

Contract Laboratory needed for experiment is evaluate the impact resistance of an Aluminum Knuckle Steer Arms at negative 40° C. 1. Mount Knuckle through hub mounting face so that the steer arms are facing down 2. Install ball stud into steer arms and torque to 100 N-m. 3. Chill knuckles to negative 40° C for impact 4. Position so that the impact load will strike at the center of ball stud ball. 5. Test 3 of each steer arm at the 2 impact loads provided below (Height and Mass selected should represent the provided load condition). 6. Acceptance criteria is no fracture

Total combination should reflect 12 knuckles each: Load 1: 7,500 lbf Load 2: 13,000 lbf

Closed

Independent consumer products safety laboratory needed for Amazon Safety Assessment Testing of natural deodorant made of coconut oil, shea butter, candelilla wax, baking soda, corn starch and essential oils. A product testing document or safety assessment from an independent laboratory or consulting company. This document usually shows an analysis of the ingredients in the product.

Closed

India Laboratory needed for UL Testing of outdoor lighting products. We need UL report , so please let us know what is the procedure? How long will take for testing one luminaire?

Closed

Asia company needs laboratory for microscopic testing of tube and shell type heat exchanger used in Liquified petroleum gas

Closed

Food Laboratory needed for nutritional testing of chicken eggs for protein and vitamin content.

Closed

URGENT: USA FDA GMP Medical device laboratory needed for device functionality and performance testing of medial devices used to administer biological drugs intra-parentally to humans. These devices include auto-injectors, pre-filled syringes, etc. Testing includes break loose/glide force testing, flow testing, simulating transportation and drop testing, etc.

Closed

India Packaging Laboratory needed for Vapor Corrosion Inhibitor VCI BAG Testing

Closed

San Diego California Blood Laboratory needed for blood testing: Peripheral blood Karyotype molecular

Closed

USA UL certification laboratory needed for conveyor system testing (brand hytrol), with 3 electrical control panels the individual components in the panel box are all ul listed but the panel box is not we need a certificate for our final inspection that requires the box to be safe

Closed

Natural gas company needs a test and calibration laboratory for natural gas turbine meters.size 16 inch - G4000 to test flow.

Closed

Chennai Materials Laboratory needed to measure the flank wear of a drill bit using a scanning electron microscope. Require to measure the flank wear and surface roughness of a drilled composite material

Closed

Africa Pavement company needs polymer laboratory for Dispersion Test of the polymer modified binder using a microscope ( 100 x magnification). ASTM E 1508-12a. Is this possible? How should the sample be submitted in terms of quantity and packaging? How long will it take to get these results? The price?

Closed

Large oil company needs materials laboratory to perform Soil Cleaning Test by FED-STD-791 Method, 7502. Testing to be done on an isoparrafinic solvent with flash point ~ 220F.

Closed

Materials Laboratory needed for Oil Flashpoint Testing to ASTM d93, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Testerflash point

Closed

Australia university researcher needs laboratory for DHA (Detailed Hydrocarbon Analysis) test for commercial gasoline standard knocking test in CFR engine fueled by Australia 91 gasoline. In order to interpret experimental results, we want to get detailed composition information of the commercial gasoline. Hao

Closed

URGENT: USA environmental laboratory needed for two European Union studies on compound tetrakis (hexylmethyl)phosphonium sulfate (THPS), which they registered for use for bacterial control in recirculating water handling systems for wells associated with oil and gas pipelines We will need quotes for work on each of two studies as follows: 1 - A price quote for an EU Aerobic Biodegradability Study as described on Attachment #1; and 2 - A price quote for an EU N-Octanol Water Partition Coefficient Study as described on Attachment #2. We would appreciate receipt of these quotes by 3:00 pm on Thursday, December 10, 2015

Closed

Oil laboratory needed to test oil specifications report on the used residual oil

Closed

Materials laboratory needed for ASTM testing of roof coating to ASTM D 6083Standard Specification for Liquid Applied Acrylic Coating Used in Roofing or to ASTM C 1549 or ASTM E 1918

Closed

Small producer of olive oil needs laboratory for testing required to sell in in Guatemala .How much does it cost?

Closed

Africa geology laboratory needed for Laboratory Testing of Non-Evacuated & Expanded Perlite (P05) Thermal conductivity, Moisture content, pH, Particle size, Density

Closed

New york CIty Area Sensory laboratory needed for pheromone testing in humans to determine the composition of pheromones and other compounds to replicate it as a fragrance.

Closed

Materials laboratory needed for testing mixture of rosin, beeswax and activated charcoal heated on a open flame to determine malleability and ability to be cast into shapes at low temperatures

Closed

Contract Test Lab needed for formulation testing of perfume /aroamatic/syenthic essential oil for compound and want to its formulation

Closed

India Microbiology Laboratory needed for Anti Microbial Testing of anti-microbial coating

Closed

INSURANCE Oil Laboratory needed for contamination testing from diesel testing from truckWe've submitted 2 tests to our insurance company but now they say the results have to be certified. Can y'all help?

Closed