New Laboratory Test Requests

Food Packaging Microwave Safety Testing

Consumer Products Laboratory needed for microwave safety testing for molded fiber food service container packaging. View More

Cosmetics Skin Irritation Studies

Clinical Research Laboratory needed for consumer product safety testing of cosmetics for skin irritation testing to ISO Standards. Please provide cos... View More

High End Cosmetics Facial Skin Care Testing

Experienced Consumer Safety Laboratory needed for full testing of a high end Cosmetic Facial Skin Care to ensure it meets all Chinese cosmetic regu... View More

CCCR2001 Canada's Consumer Chemicals and Containers Compliance Testing

Vape Company needs Product Safety Laboratory needed for e-vape packaging testing to comply to canada CCCR2001 Canada's Consumer Chemicals and Containe... View More

Cosmetics HRIPT

CLINICAL RESEARCH LABORATORY NEEDED FOR HRIPT TESTS OF HAIR COLORS ACCORDING TO BIS 4011:2018 METHODS OF TEST FOR
SAFETY EVALUATION OF COSMETICS View More

Marble Maze Puzzle Consumer Products Testing

START-UP Small Puzzle Business needs Consumer Products Safety Laboratory for CE Marking and Consumer Products Testing of different variations of marb... View More

Oregon Department of Transportation (ODOT) Adhesive Bond Strength

Large corporation needs Materials Laboratory for Oregon Department of Transportation (ODOT) testing of adhesive bond strength on Transportation Safety... View More

Processed Meat Food Safety Tests

LONG-TERM TESTING International Food Laboratory needed to perform various tests for processed meat products used for food safety . View More

In Vivo Acute Toxicity and Product Safety Study

FUNDING APPROVED Preclinical CRO needed for in vivo acute toxicity and product safety study of pharmaceutical drug coating using 5 different medical d... View More

ANSI Hi-Vis Safety Vest Certification Testing

Performance Laboratory needed for ANSI certification testing of Hi-Vis safety vest to ANSI/ISEA 107. Our target is ANSI Class 2 Type R. If you are ... View More

Baby Suction Bowl Consumer Products Testing

USA Consumer Products Safety Laboratory needed for certification testing of baby product which is a set of 3 silicone suction bowls.

Can you pleas... View More

Phototherapy Mask Spectral Transmittance

Medical Device Safety Performance Laboratory needed for EN Spectral transmittance in the ultraviolet for phototherapy masks using the European Standar... View More

Powdered Eyeshadow Microbiology Testing

LONG-TERM TESTING USA Tri-State Cosmetics Laboratory needed for microbiology testing and any other required safety testing for pressed powder eyeshado... View More

Food Retail Sauce Reverse Engineering

Food Laboratory needed for deformulation of a sauce that food manufacturer uses to with vegetables in a bowl as food retail product. We are interested... View More

Facial Moisturizer Testing

ISO 17025 Cosmetics Laboratory needed for full testing of a cosmetics facial moisturizer cream to comply with cosmetics safety act View More

ANSI / ISEA 107 Safety Apparel Testing

Safety Laboratory needed for safety apparel testing as per ANSI/ ISEA 107 Type R Class 2 American National Standard for High-Visibility Safety Apparel... View More

Baby Care Product Safety

START-UP Consumer Products Laboratory needed for product safety testing on 3 new baby care products. View More

Human Repeat Insult Patch Test HRIPT Study

Consumer Products Safety Laboratory needed for Human Repeat Insult Patch Test HRIPT Study. Please provide cost. View More

Cosmetics Skincare Line Product Testing

Skincare Manufacturer of multiple products needs USA Clinical Research Cosmetics Laboratory to perform all ingredient, labeling claims, product safety... View More

ISO and IEC Dental Equipment Testing

Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More

Sustainable Apparel Certificates and Declaration Testing

Consumer Products Laboratory needed for conformity testing of the certificates and declarations for 3 different sustainable brand garments that are pl... View More

Cosmetics Skin Care Macademia Oil Testing

Cosmetics Laboratory needed for advising and quality testing food grade macademia nut oil for cosmetics skin care dermatology application. Company is ... View More

Baby Soap Product Safety Testing

Consumer Safety Laboratory needed for complete baby soap product safety testing View More

Safety Lighting Temperature and Vibration Testing

Safety Lighting Manufacturer needs component tested for multiple temperature and vibration conditions View More

DIN Polycarbonate Optical Distortion

Automotive Laboratory needed for DIN testing of polycarbonate sheet for determining The Optical Distortion And Refractive Power Of Safety Glazing Mate... View More

Perfume Safety Certification Testing

Consumer Product Safety Laboratory needed for solid perfume formulation and safety certifications on its safety. Is View More

Amazon Plastic Child Safety Device

PRODUCT DEVELOPMENT Materials Laboratory needed for testing to certify a Plastic Child safety device to sell on Amazon. The device has already passed... View More

Alcoholic Spirits Testing

Importer needs Laboratory for basic safety on all spirits products we are importing including tests for ABV, lead, arsenic, furfural, methanol, and al... View More

Art Materials LHAMA testing

Large Corporation needs USA Consumer Products Safety Laboratory for ASTM LHAMA testing of school putty and flexible mass with the ASTMD4236 Standard P... View More

Perfume Clinical Research Studies

Perfume Manufacturer needs Clinical Research Laboratory for consumer safety testing including pediatric and children safety, skin irritation, oral irr... View More

Skincare Oral Toxicity / Oral Irritation Studies

Toxicology Laboratory needed for oral toxicity and irritation testing for facial tissues containing lotion to demonstrate product safety in the event ... View More

Imported Outdoor Furniture Testing

Importer of outdoor furniture needs Consumer Products Hardlines Laboratory for advising them on the certification testing required along with performi... View More

Dog Toy Safety Testing

Consumer Products Laboratory needed for product safety testing of dog toys to make sure they are safe including toxicology, lead BPA, PVC, Phthalate F... View More

Electric Polyester Heating Element

USA Product Safety Laboratory needed for multiple tests on electric polyester heating element including:

CSA, NEC/CEC, NFPA 70,CSA CEC 22.1
IEEE 2... View More

10X AV SKIN TESTS

WELLNESS COMPANY NEEDS DERMATOLOGY CLINICAL RESEARCH LABORATORY FOR ALOE VERA 10% CONCENTRATION PRODUCT FOR EFFICACY AND SAFETY STUDY TO EVALUATE THE ... View More

OECD GLP Bone Graft Biocompatibility Study

Medical Device Manufacturer needs FDA GLP Medical Device Product Safety Laboratory for OECD biocompatability study of bone graft material. View More

DEVELOPMENTAL - Medical Device Orthopedic Implants

PRODUCT DEVELOPMENT Experienced Medical Device company working to develop new orthopedic implants needs Medical Product Safety Laboratory for conducti... View More

ASTM Baby Sling Testing

Baby Products Company needs India Consumer Products Laboratory for ASTM testing of baby slings to ASTM F2236 Standard Consumer Safety Specification fo... View More

Reusable Orthopedic Medical Device CE Marking Evaluation

Medical Device Manufacturer needs Medical Device Laboratory for Technical, Clinical Evaluation, Biocompatibility, Biological, Sterility/Endotoxin, T... View More

Natural Soy Candle Consumer Product Testing

CPSC Consumer Products Laboratory needed for all consumer products testing for the safety labels and ingredients for low smoke natual candles made ... View More

ISO Medical Implant Biocompatibility Studies

Medical Device Manufacturer needs Product Safety Laboratory for ISO 10993 medical implants biocompatibility studies:
(sensitization, systemic toxi... View More

Dietary Supplement Active Ingredient Purity and Safety Studies

LONG-TERM TESTING Nutraceutical Laboratory needed to certify the active ingredient in our dietary supplement and ensure our product is clear of harmfu... View More

Honey Safety and Contaminant Testing

Agriculture Laboratory needed for honey testing for food safety and contaminants. View More

FDA GLP / AATCC Cleaning Wipes Testing

FDA Product Safety Laboratory needed for the following cleaning wet tissue wipes testing:
1) Cytotoxicity test: FDA GLP Guideline
2) Skin irritatio... View More

ANSI Climbing Safety Harness Testing

USA Performance Laboratory needed for ANSI testing of half-length, nylon safety harness used for sports climbing according to ANSI Z133 Standard for ... View More

SASO Toilet Deodorants Bathroom Odor Removers

Independent Third-Party Laboratory needed with testing capabilities to test as per SASO 1959, SASO 1958, SASO 494 for the product - TOILET DEODORANTS ... View More

Crib Product Safety Evaluation

Canada Consumer Products Laboratory needed for crib product safety testing for compliance to Canadian regulations.
View More

Yielding Accelerator / Garden Spray Safety

Environmental Toxicology Laboratory needed for safety testing for yielding accelerator/gardren spray to determine it is safe to use. View More

ANSI Personal Fall Arrest System Testing

Large Corporation needs Performance Laboratory for ANSI Safety Testing to ANSI/ASSE Z359 American National Standard Safety Requirements for Personal ... View More

Astm Baby Inflatable Mattress Testing

Consumer Products Laboratory needed for ASTM Testing of baby's inflatable mattress/cushion to ASTM F2729 View More

Hotel's Quality Control Food Testing

LONG-TERM TESTING Large hotel chain needs large Food Laboratory for food safety and quality control testing on food raw materials cooked food, swabs t... View More

IEC Lighting Ballast Label Durability

Accredited Electrical Laboratory needed for IEC lighting ballast label durability test in accordance with §7.2 of IEC 61347-1 (2015 ed.) Standard Lamp... View More

Toilet Sanitizer Materials Safety Data Sheet (MSDS)

Certified Microbiology Laboratory needed for microbial efficacy testing of a toilet sanitizer to support a matierals safety data sheet (MSDS) and to ... View More

Candle Consumer Product Safety Testing

Consumer Products Laboratory needed for all product safety testing of luxury candles prior to a major retailer carrying the products. View More

Multiple Cosmetics Product Clinical Research Studies

Cosmetics Manufacturer planning to enter USA Market need FDA Clinical Research Laboratory to product safety testing of all of it's cosmetics products... View More

Biodegradable Infant Bibs Dermatology Studies

Consumer Products Safety Laboratory needed for dermatological studies on a 100% biodegradable infant bibs and mats. View More

Bamboo Toothbrush Product Safety Testing

Consumer Products Laboratory needed for consumer product safety testing of bamboo toothbrushes with a handle made of bamboo and bristles made of nylon... View More

FDA GMP Dietary Supplement Testing

USA FDA GMP Dietary Supplement Laboratory needed for toxicology, labeling ingredients confirmation and contaminant testing of dietary supplements for ... View More

FDA PP and PBT nonwoven meltblown

Materials Laboratory needed for food contact surface testing of polymers PP and PBT nonwoven meltblown to the following FDA Code of Federal Requlatio... View More

Pet Product CA Prop 65.

PRODUCT DEVELOPMENT Start-up Pet Product Company needs laboratory for California Proposition CA Prop 65 testing of imported pet product. . View More

Gunpowder TR TS 028/2012 Safety Confirmation

Explosives Laboratory needed for confirming the conformity of the safety of gunpowder (HS Code VED 3601000000) to the requirements of TR TS 028/2012 D... View More

EPA GLP Toxicity and Acute Ecotoxicity Studies

Environmental Toxicology Laboratory needed for studies on acute mamalian toxicity (acute oral, dermal, inhalation; primary eye and skin irritation; sk... View More

FDA Paper Straws Food Additives Testing

LONG-TERM TESTING Third-Party Food Laboratory needed for food additives testing of paper straws to 21CFR 177.1520 Indirect Food Additives Polymers -... View More

oxicological Risk Assessments (TRA) and Labeling of Hazardous Art Materials (LHAMA) Certifications

Product Safety Laboratory needed for Toxicological Risk Assessments (TRA) and Labeling of Hazardous Art Materials (LHAMA) Certifications testing of t... View More

ANSI Safety Label Compliance Testing

Laboratory needed for ANSI compliance testing of six safety labels for ANSI Z535.4 compliance for Color and Text Height and Fonts. View More

CPSC Doll and Stuffed Animal

CPSC Consumer Products Laboratory needed for consumer products safety testing of dolls (not intended for children under 6) and stuffed animals for
l... View More

Baby Wipes Clinical Research and Product Safety

LONG-TERM TESTING Baby Products Manufacturer needs Clinical Research Laboratory for certification product safety and allergy testing of lbaby wipes
... View More

Beauty Product Safety

Vancouver Cosmetics Laboratory needed for product safety testing on health/beauty product View More

LED Bulb Star Rating Testing

LONG-TERM Third-Party Laboratory needed for star rating of LED bulbs under IS 16102-1: Self - Ballasted LED Lamps for General Lighting Services, Part ... View More

ANSI Ladder Testing

Third-Party Laboratory needed for ANSI safety testing of ladders to ANSI A14.3 American National Standards for Ladders - Fixed - Safety Requirements View More

Consumer Product Safety

Clinical Research Laboratory needed for consumer product safety testing of nipple cover adhesive product for skin irritation customer safety. View More

ASTM-D4236 Labeling Art Materials for Chronic Health Hazards

Consumer Products Safety Laboratory needed for toxicology ASTM testing of watercolor paint for ASTM-D4236 Standard Practice for Labeling Art Materials... View More

Dental Product Safety Studies

Medical Device Laboratory needed for product safety tstudies of dental product used to absorb saliva.

View More

ASTM Baby Carrier Sling Testing

Consumer Product Safety Laboratory needed for ASTM testing of baby carrier ring slings to the ASTM F2907 Standard Consumer Safety Specification for S... View More

Playground Safety Certification

Consumer Products Safety Laboratory needed for safety certification testing for playground equipment. View More

Jewelry Safety Testing

Consumer Products Laboratory needed for consumer product safety testing of jewelry items (necklaces, bracelets, rings) and their components to ensure... View More

Child Care Product Safety

Consumer Products Laboratory needed for physical and EN safety testing of dummy chains to show they are compliant to En-12586 Child Use & Care Artic... View More

UN Safety Testing

Pharmaceutical Analytical Chemistry Laboratory for UN safety testing of artemisinin product to determine if the product is Dangerous Goods..
View More

CPSC Baby Products Testing

CPSC Laboratory needed for consumer product safety testing of plastic signs used on strollers and car seats. Testing is neede for selling items on Am... View More

Copper Cathode Safety Testing

Power company needs electrical laboratory for electrical safety testing of 300MT of copper cathode. View More

Child Dummy Clip Testing

Consumer Products Laboratory needed for child safety testing of silicone dummy clip to EN 12586 Child use and care articles. Soother holder. Safety re... View More

female menstrual hygiene product

Medical Device Laboratory needed for product safety testing of female menstrual hygiene product to ensure it is free from toxins and dyes and safe to ... View More

ANSI Glove Cut Resistance

Safety Laboratory needed for ANSI / ISEA cut resistant testing of safety gloves to, ANSI / ISEA 105-2016, standards View More

Construction Safety Glass Testing

Safety Laboratory needed for ANSI/ ISEA testing of construction safety glasses to ANSI/ISEA Z87.1-2015 American National Standard for Occupational and... View More

Baby Teether Testing

CPSC Consumer Products Laboratory needed for product safety testing ofSilicone Teether products including teething rings. teething clips and teething... View More

Earpug Noise Reduction Rating

Safety Laboratory needed for earplug Noise Reduction Rating testing compliant with ANSI STD S3.19-1974 for a new earplug design. Mean attenuation valu... View More

ASTM Safety Shoe Testing

Safety Laboratory needed for ASTM testing of safety shoes to ASTM standards including (e.g. impact resistance, compression resistance).

View More

LHAMA Art Products

CPSC Consumer Products Laboratory needed for ASTM Testing of the following 4 painting products to ASTM D-4236, Standard Practice for Labeling Art Mate... View More

Baby Crib Safety

Childcare Company needs Consumer Products Safety Laboratory needed for crib safety testing as per Health Canada regulations:

- SOR/2010-261 Cribs, ... View More

CPSIA, California Prop 65, ASTM Toy Safety

Consumer Products Laboratory needed for CPSIA, California Prop65 and ASTM testing of children's robotic toys ASTM F963 full test( Part1, Part2, Part3)... View More

ASTM Art Product Compliance Testing

Consumer Products Safety Laboratory needed for 3rd party testing for ASTM D4236 compliance on a liquid art craft manufactured in the united states View More

Clay Environmental Toxicology Testing

Environmental Toxicology Laboratory needed for clay testing to determine it's safety for animals and plant life. View More

Tests for Medical Device In Vitro Cytotoxicity.

ISO Certified Medical Device Product Safety Laboratory needed for ISO 10993-5: Biological Evaluation of Medical Devices, Part 5: Tests for In Vitro Cy... View More

ASTM Pool Net Specification Testing

Performance Laboratory needed for ASTM testing on pool nets to ASTM F 1346-91, Standard Performance Specification for Safety Covers and Labeling Re... View More

Preclinical IND Enabling Safety Studies

LONG-TERM STUDY FDA GLP Compliant Preclinical Laboratory needed for IND enabling safety toxicology studies for a radiopharmaceutical.powder View More

IEC Compliance of Medical Electrical Equipment

Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More

OTC Drug Testing

URGENT Pharmaceutical Product Safety Laboratory needed for animal caries reduction test in OTC drug. View More

Candle Compliance Evaluation

Consumer Products Laboratory needed for compliance testing of two different candles with coconut wax and 2 separate fragrances to international safety... View More

Doll CPSC Certification of Compliance

CPSC Consumer Products Laboratory needed for Toy testing of handmade fabric dolls for CPSC Certificate of Compliance. View More

Fitness Machine Testing

Consumer Products Laboratory needed for testing of a new fitness machine.

View More

GRAS Testing of Lactobacillus

Product Safety Laboratory needed for testing to support GRAS filing for a microorganism Lactobacillus liquid and powdered product. View More

Medical Device Biological Evaluation

Implantable Medical Device Manufacturer needs Product Safety Toxicology Laboratory for in vivo irritation testing as per ISO 10993-10 Biological eval... View More

CPSC Candle Testing

CPSC Laboratory needed for consumer product safety testing of candle packaged in a tin. Testing is being done in order to support selling candles on ... View More

Consumer Products Laboratory needed for ASTM testing of new exercise equipment with resistance bands, clips for attachments and straps for safety and ... View More

US Natural skincare company needs consumer safety laboratory for safety and challenge testing for EU compliance license. View More

Lighting Manufacturer needs Laboratory for SAE candela measurements testing to SAE J845 Optical Warning Devices for Authorized Emergency, Maintenance... View More

Dermatology Clinical Research Laboratory needed for product safety (irritation) testing of cosmetics on human skin. View More

Medical Device Company needs 3rd party Product Safety Laboratory for Biocompatiability testing (cyto, irritation, sensitization)
View More

Clinical Research Laboratory needed for clinical research study and consumer safety testing on cosmetics including:

1) Hypoallergenic
2) PIPT
3)... View More

FDA GLP Product Safety Laboratory needed for biocompatibility testing for medical devices View More

Consumer Products Safety Laboratory needed for child safety testing of several push and turn containers View More

FDA GLP Medical Device Product Safety Laboratory needed for ISO 10993-1 biocompatibility studies for implantable bone graft substitutes (granules), ... View More

Consumer Safety Laboratory needed for safety cap testing of tree post T post / Rebar
View More

Non-wovens Manufacturer needs Textiles Laboratory for foam and fiber pad testing View More

Cosmetics Laboratory needed for Consumer Products Safety LHAMA certificate testing for hair chalks made in China for sale in US View More

Consumer Products Laboratory needed for full CPSC testing of baby feeder and a teether according to CPSC requirements including:
15 USC 1278a: Lead i... View More

Automotive Laboratory needed for safety, particulate emission and so2 and no2 testing of a device used in fuel tank of any vehicle or any equipment th... View More

Consumer Products Laboratory needed for child safety and hygiene testing on 4mm corrugated plastic product with rounded edges that children older than... View More

Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seatin... View More

Consumer Products Safety Laboratory needed for CPSC compliance flammability testing for infant sleepwear textiles View More

Electrical Laboratory needed for fir safety of electrical radiant heating systems and its ability to start a fire when installed in domestic or Comme... View More

Metallurgical Laboratory needed for elemental analysis testing for presence of cinnabar (mercury) in micro-crystalline quartz View More

Cosmetics Laboratory need for microbiology and analytical chemistry testing on skin and hair care products per export requirements. Essential test par... View More

Infant sleep wear fabric testing for the consumer protection agency. View More

Virology Laboratory needed for testing to show the absence of toxins associated with pathogenic Bacillus spp. or associated with any emetic and/or di... View More

Electrical Certification Laboratory needed for NFPA certification testing of lineman's gloves to NFPA 70E, Standard for Electrical Safety in the Workp... View More

Electrical Laboratory needed for ASTM Testing of safety protection gloves to ASTM F2675 Standard Test Method for Determining Arc Ratings of Hand Prote... View More

Consumer Safety Products Laboratory needed for consumer safety testing of infant pillows for breathability, anti-suffocation and the risk of CO2 rebre... View More

START-UP Babyfood manufacturer needs microbiology laboratory for food safety testing for organic canned babyfood with no preservatives. View More

Product safety laboratory needed for OECD skin corrosion and irritation testing by in vitro methods OECD TG431, TG430, TG435, ...Apart from liquid pr... View More

Consumer Product Safety Laboratory needed for skin irritation testing of a fraction of essential oil (Leptospernmum Scoparium) which will be included ... View More

Consumer Products Safety laboratory needed for LHAMA / ASTM testing of children's paint product and art material formulations for conformance to ASTM ... View More

START-UP Company with range of therapeutic products needs pricing for hypoallergenic testing to make the claims of hypoallergenic on it's products. . View More

Consumer Products laboratory needed for soft toy safety testing to ensure it meets the safety standards for Canada and USA View More

Third-party laboratory needed for testing an Inner Shield Wire (1.2mm diameter) to ASME SFA-5.20 standard, Safety in Welding, Cutting, and Allied Proc... View More

Cosmetics laboratory needed for safety testing of a peloid mud to ensure it is safe to use on the skin. View More

Laboratory needed for FMVSS and ASTM burn resistance testing of safety sheet vinyl flooring in accordance with FMVSS 302 and/or ASTM D5132-04 . The F... View More

Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
f... View More

FDA food laboratory needed for directed sampling and food safety testing of frozen poultry. View More

Consumer product safety laboratory needed for safety and durability testing of exercise harnesses View More

Clinical research laboratory needed for clinical study of baby soap for dry skin to determine their safety. View More

Materials laboratory needed for USDOT certification testing of 30 gal bio boxes for transporting Corrosive Class 8 UN3261 materials. View More

FDA food laboratory needed for FDA food contact material safety testing of plastic resealable containers to show it is BPA free. View More

Medical Device laboratory needed for several microbiology and toxicology tests of a polypropylene orthodontic device.

o Mercury limits
o Mic... View More

Independent cosmetics laboratory needed for safety and ingredient testing of organic beard care products. View More

Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: Gener... View More

START-UP needs EPA environmental toxicology laboratory for topical, safety, and inhalation toxicity studies of an air disinfectant using bacteria that... View More

URGENT CPSC certified cosmetics laboratory needed for safety evaluations on two beauty products that require evaluation for quality per QVC standards. View More

Consumer products laboratory needed children's product / toy testing for three different products: 1. fabric crinkle toy, 2. fabric blanket 3. 3-dimen... View More

Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:

F2052 Test Method fo... View More

Physical laboratory needed for EN fire safety testing (90min) for storage cabinets as per EN 14470, European
Standard for Safety Storage
Cabinets ... View More

URGENT Large corporation needs automotive laboratory for UN testing of coating tint used on windscreen/windshield to ISO 3537 Headform testing for aut... View More

Consumer Products laboratory needed for CPSC testing of 3-4 models of bicycle mounted baby seats to ASTM F1625, Standard Specification and Test Method... View More

Importer of baby blankets needs consumer products laboratory for confirmatory toxicity and product safety testing on the product to ensure it is safe... View More

Culinary laboratory needed for food formulation and product prototype development which must meet food safety requirements for production. View More

Consumer products toxicology laboratory needed for product safety testing of natural essential oil-based flea and tick spray for pets. Toxicity, oil l... View More

FDA cGMP Medical device laboratory needed for product safety and toxicology study testing of water based personal lubricant including

1) Condom bio... View More

Importer needs consumer products laboratory for FDA safety testing of silicone adult toys to ensure material meets all US safety requirements. View More

ISO / IEC 17025 Accredited consumer product laboratory needed for safety equipment testing to EN and KS standards including:
Particle filter testing ... View More

START-UP Food laboratory needed testing several beverage formulations for :
- shelf life / stability
- alcohol content by volume ABV
- contaminants... View More

Large corporation needs materials laboratory for ASTM slip resistance testing of polymer and acrylic prototype bathroom tiles to ASTM 462, Standard Co... View More

Consumer Products Safety Laboratory needed for FDA sunglasses safety testing by drop ball test method to Standard LT-1 July 12, 1971 21 CFR 801, 410 M... View More

Materials laboratory needed for NRR/SNR rating of protective earmuffs to meet standard ANSI S3.19 and if possible EN 352-1: 1993 desired. View More

Food laboratory needed for food safety testing of a homeopathic liquid to determine safety for human consumption. Also need to know the mass balance ... View More

Product Safety laboratory needed for toxicology and compliance testing of mosquito repellent to show conformance to FDA standards and safety to market... View More

URGENT Consumer product safety laboratory needed for children's apparel testing to obtain US CPSC certificate View More

Product safety laboratory needed for ANSI testing of ladder levelers to ANSI 14.8-2013 (Safety Requirements for Ladder Accessories). View More

Cosmetics clinical research laboratory needed for dermatologic studies of cosmetics formulations to determine safety for use on human skin including a... View More

Clinical research laboratory needed for BIS compliant consumer safety study including patch test and sting test for baby wipes:
1. Sensitive skin vol... View More

Food toxicology laboratory needed for safety testing of polymers and polyethylene terephthalate (PET) used in food products. View More

Cosmetics toxicology laboratory needed for IFRA safety and toxicity testing of perfume oil to ensure safety for human skin application. View More

LONG TERM TESTING Analytical chemistry laboratory needed for MSDS and purity testing of 7 imported bulk containers of chemicals

1) Aniracetam
2) ... View More

Large electronics company needs product safety laboratory for fall hazard, structural integrity / physical stability / product safety testing of a com... View More

FDA GMP analytical chemistry laboratory needed for flash point testing to ASTM D93 using a limit of NLT 170 degree C for a large pharmaceutical compan... View More

URGENT TESTING Consumer product safety laboratory needed for CPSIA toxicology and product safety testing of kids' makeup. View More

Laboratory equipment calibration and electrical safety maintenance testing. View More

Consumer product laboratory needed for CPSC safety testing of an arts and crafts product constructed out of urethane, water based contact cement, hard... View More

Large corporation needs metals materials laboratory for RoHS testing for plain-carbon steel wires of various sizes, grades, and treatments. Wire is i... View More

Materials laboratory needed for ANSI Testing of LED Smart Film products to meet welding filter requirements of ANSI Z87.1-2015 table 6, American Nati... View More

Medical device safety laboratory needed for biocompatibility testing of medical devices. View More

NIOSH laboratory needed for industrial hygiene testing: hazardous material surveys for asbestos, lead (Pb), tributyltin (TBT), poly-chlorinated biphen... View More

Preclinical BSL II contract research organization (CRO) needed for in vivo studies requiring injection of a vector into rat thalamus. Stereotaxic surg... View More

Automotive safety laboratory needed for simulated environmental testing (dust, moisture, vibration, etc.) as well as audible testing of a backup alarm... View More

UL certification electrical laboratory needed for UL 61010 electrical safety testing of a boiler room apparatus. View More

Food laboratory needed for HAACP safety testing of flavored peanuts and peanut butter. View More

LARGE PHARMA needs FDA GMP contract research organization CRO for ChP 2010 XIA C testing of depressant drug substances according to Chinese pharmacopo... View More

Consumer safety / building materials laboratory needed for safety, durability, and structural performance testing of a cabinet unit according to ANSI/... View More

Medical device laboratory needed for light safety testing of an opthalmic instrument according to ISO 15004. View More

Consumer products safety laboratory needed for European compliance testing of a plastic eating utensil to ensure the product does not impose a fire, e... View More

Toxicology Laboratory needed for OECD toxicity, toxicokinetics and carcinogenicity testing of chemicals for Safety Data Sheet SDS to OECD 417, Toxicok... View More

Transportation laboratory needed for HAZMAT Testing of chemicals to DOT class 6 hazard classification testing (packing group 1, 2 or 3) for 3 differen... View More

FDA Product Safety laboratory needed for toxicology studies of medical device (ultrasound gel) for biocompatibility:  cytotoxicity, irritation / intra... View More

Cosmetic / Consumer Product Laboratory needed for analytic chemistry testing of a skin cream product to meet FDA regulations including percentage of o... View More

Cosmetic / Consumer Products Laboratory for safety testing of a hair care product to support compliance with FDA regulations and receipt of FDC certif... View More

Cosmetic laboratory needed for FDA compliant testing of a powdered cosmetic product for heavy metals and harmful ingredients. View More

Medical device company needs clinical product safety laboratory for in vivo, in vitro and microbiology testing of disposable feminine pads including: ... View More

ON-SITE TESTING Electrical laboratory needed for voltage electrical safety testing. General Low Voltage below 70 Volts DC testing for the Safety of a ... View More

URGENT TESTING FDA GMP Medical device preclinical laboratory needed for product safety and toxicity studies of a plastic dental aligner. Risk Assessme... View More

START-UP Skincare company needs clinical research laboratory for safety testing of face cream formulated with coconut oil, shea butter, almond oil, an... View More

Consumer Safety Laboratory needed for product safety testing of light modeling clay for kids View More

Clinical Research Laboratory needed for cosmetics safety assessment of several skincare products. View More

Medical Device preclinical contract research organization CRO needed for insulin characterization with or without infusion through medical device: (1... View More

Personal protective equipment laboratory needed for ASTM F2675 Arc Flash testing of a protective glove. Quote needed. View More

FDA GLP Toxicology laboratory needed for GLP Toxicity Study: Acute Inhalation Toxicity Studies for Consumer Product (Insect Repellent) View More

CPSC Consumer Safety Laboratory needed for CPSC certification testing of children's play mats to obtain a Children's Product Certificate. View More

Large biologics company needs GLP toxicology laboratory for human health and safety testing as follows: acute oral infectivity and toxicity, acute pul... View More

INDIVIDUAL. Consumer product safety testing for harmful chemicals, off gases, and presence of toxins in a children's foam mat flooring. View More

Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to ... View More

Pesticide laboratory needed for safety and efficacy testing of mosquito repellent. View More

Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines... View More

Consumer products safety laboratory needed for safety comparison study of infant mattress versus comparative models. View More

Nautical design laboratory needed for safety testing boat seating to meet ABYC H-31 seat structures standards. View More

Toxicology / Product Safety Laboratory needed for REACH testing of 4 substances, all within the 1-10 tonnes PA tonnage band. View More

LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and... View More

Consumer product safety laboratory needed for safety testing of a baby bassinet to meet USA regulations. View More

Food laboratory needed for milk powder quality testing :

Heat Instability: Alcohol Test > 75% IDF: 133:1981

Cl... View More

Analytical chemistry laboratory needed for residual chemical testing of hypochlorus acid for EPA certification in foods. View More

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

Occupational safety laboratory needed for cotton dust testing of a powder. View More

Pharmaceutical laboratory needed for stability, SPF, and safety testing of a lotion. View More

Hygienic laboratory needed for FDA approved product safety testing of a reusable tampon applicator to meet the following criteria: product cleanliness... View More

Consumer product safety laboratory needed for EN 71 toy safety testing of a skateboard. View More

ISO Electrical laboratory needed for BS certification of EN 60335/2-96 certified testing of a heating element.

View More

Analytical laboratory needed for failure analysis of HDPE bottles to determine cause of leakage. View More

GLP metallurgical laboratory needed for AOAC 2006.03 standard or EPA6010/6020 testing for Aresenic, Cadmium, Cobalt, Molybdenum, Nickel, Lead, Seleniu... View More

FDA GLP Product Safety Laboratory needed for Biocompatibility Testing for a medical device according to ISO 10993-1. Specifically Cytotoxicity testing... View More

Food microbiology laboratory needed for microbiological standard plate count (SPC) testing and Coliforms testing per RAWMI standards: raw milk shall n... View More

Product Safety laboratory needed for ocular irritation testing for 3 cosmetics products. Please include prices, methods, and duration of testing. View More

Marine Aquaculture company needs Agriculture laboratory needed for fish feed testing for presence of aflatoxin and heavy metals. View More

Large hotel chain needs Food laboratory needed for ground beef testing to determine fat content and the raio between meat solids and fat.
View More

Toxicology laboratory needed for testing hydrolyzed chicken cartilage/collagen to evaluate acute and chronic toxicity, and determine ingredients. View More

In vivo toxicology laboratory needed to perform an in vivo 90 day study to determine toxicological effects in order to determine NOEL and the safety... View More

Personal protection equipment (PPE) laboratory needed for ASTM F2992 cut resistance testing of a stainless steel mesh using a TDM-100 machine.
View More

Packaging laboratory needed for food contact surface testing for compliance to EU regulation (EN) 602/2004 testing of an aluminium wire to comply with... View More

Chemical packaging facility needed for testing of a consumer liquid meeting US 16 CFR § 1700.20 and CAN/CSA-Z76.1-06 (R2016) accordance for child resi... View More

Consumer Products laboratory needed for new product testing of baby wipes.

View More

Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbi... View More

Explosives laboratory needed for ISO testing of protective clothing for abrasive blasting to ISO 14877 View More

URGENT LONG TERM Contract Research Organization needed for microbiological, pesticide residue, and heavy metal testing of nutritional supplement.
... View More

Food contact surface testing on scented mineral oil used for wood surfaces( wooden chop blocks) for direct/indirect food contact a View More

Food testing laboratory needed for performing color testing analysis on confectionery items such as Blue 1 (E133), Red 40 Lake (E129), Blue 2 Lake (E1... View More

Materials laboratory needed for flame retardant testing on polypropylene woven fabric per standards DIN 4102 Class B 2, EN 13501, UL94VNT-2, NFPA701, ... View More

Microbiology laboratory needed for testing hand sanitizer using a microbial challenge test.

View More

Cosmetic laboratory needed for testing for the presence of a colored dye in sample for FDA certification. View More

Automotive laboratory needed for UNECE vehicle safety testing automotive anti-lock brakes according to ECE R13H.
View More

Food laboratory needed for Ph level, nutrition facts and food labeling testing of marinade and sauce to meet certification standards of Virginia depa... View More

Food laboratory needed for CODEX testing of iodate and iodine from industrial salt via CODEX STAN 150-1985 methods. View More

Food testing laboratory needed for quality testing analysis of linseed and walnut oils for Acid value (mgKOH/g); Iodine value (g12/100g); and Fatty ac... View More

URGENT TESTING NEEDED. Cosmetic fragrance laboratory needed for testing a bath bomb for skin irritation and safety. View More

URGENT TESTING NEEDED. Analytical chemistry laboratory needed for analyzing a distilled spirit for the presence, and quantity if any, of an alkaloid k... View More

FDA GLP medical device preclinical laboratory needed for product safety testing of biodegradable implant for biocompatibility and cytotoxicity accordi... View More

Microbiology laboratory needed for bulk plant material analysis for Thermoactinomyces vulgari and T. sacchari. View More

GLP Environmental Toxicology laboratory needed for OECD testing of mammalian cell chromosome aberration in the presence of a chemical according to OEC... View More

Clinical Research laboratory needed for irritation and allergy testing of deodorant. View More

Food laboratory needed for certification testing of scoville units of a capsaicin extract. View More

Cosmetics Toxicology laboratory needed for Phototoxicity studies and dermal testing of essential oils. View More

FDA Consumer Products Safety Laboratory needed for sunglasses testing to meet FDA regulations for importation. View More

Food Safety Laboratory needed for popcorn testing for Heavy metals, Pesticide Residues, Aflatoxins, Gluten levels View More

FDA GMP, ISO Preclinical Laboratory needed for essential toxicological tests to authorize a new inhalation pharmaceutical product in inhalation pharma... View More

Analytical chemistry laboratory needed for dietary supplement testing for contamination with pharmaceutical ingredients: (1) Presence of pharmaceutica... View More

Consumer Products Laboratory needed for consumer product safety testing of 5 scented candles ( types of wax, types of fragrances...).


View More

Pharmaceutical packaging laboratory needed for CPSC Child Resistant Pack testing View More

Food analytical chemistry laboratory needed for chemical analysis of bbq sauce ready for distribution View More

LEGAL Law firm needs microbiology laboratory for listeria testing in recalled hummus . View More

Materials laboratory needed for IEST and ASTM Clean Room Gloves Testing:
1 Tensile Strength ASTM D412
2 Ultimate Elongation ASTM D412
3 Surface Res... View More

URGENT NEED: Chicago restaurant needs Sushi rice tested to certify ph is 4.1-4.6 View More

URGENT Food processing company needs LACF canned vegetable testing for verification of safety View More

LONG-TERM TESTING Large manufacturing company needs food /commodities laboratory for bulk taner cargo inspections: Confirmatory Certificate of Analys... View More

Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance View More

Large electronics company needs electrical laboratory for IEC Testing: cable tray testing as per IEC 61537 View More

Major Genonmics Medical Research Center needs virology laboratory for anthrax and other testing on mammoth bone sample from Russia prior to doing DN... View More

FDA GMP medical device laboratory needed for preclinical product safety testing: biocompatibility (10993) sensitization, cytotoxicity, irritation and... View More

Chemical company needs laboratory for Dishwashing Liquid and Laundry Detergent testing for % of actives, presence of Formaldehyde and presence of Phen... View More

Italian cosmetic company needs consumer product safety laboratory for REACH compliance testing and toxicological tests for REACH registration, 1-10 to... View More

Packaging/container company needs laboratory to test the breakdown of poly-lined containers for milk and similar consumables by means of hydrochloric ... View More

Australian company needs baby product tested for safety and compliance with Australian Consumer Law 2011. The product is a handmade sensory pillow for... View More

Food Safety testing laboratory needed to test for Isoeugenol in salmon product under FDA guidelines Due to Detention without Physical Examination Test View More

Pre-clinical research laboratory with surgical capabilities needed to conduct ENT procedures on chinchillas to test a medical device. View More

Large medical company needs to test drug delivery of Taxol via small bore connections against chemical stress cracking per ISO 594-2, DIN 13276, DIN E... View More

International security lock company needs test of a Padlock per BS EN 12320 2012 View More

Packaging Laboratory needed for child-resistant compliance testing of cannabis containers (1) push and turn model, consisting of different shape conta... View More

Container company needs laboratory for UN annual retesting of overpacks to assure UN compliance per 49 CFR 173.25 View More

Major beverage production facility needs ANSI/ASHRAE 52.2 Standard testing completed on air filters used in the building to determine current Minimum ... View More

Ongoing opportunity to provide a transport company shipping Basis Jet A1 with Pre Discharge test and after discharge to conduct recertification test '... View More

UK company needs food laboratory for matcha tea testing for bacteria, chemicals lead, radiation, & pesticides. View More

LONG-TERM TESTING Food manufacturer needs packaging laboratory for leachability testing of food plastic packaging used for pre-frozen strawberry, be... View More

Furniture Consumer Products Laboratory needed for safety and weight capacity testing of chair attachment product. View More

Large European food packaging company needs FDA compliance test and safety check for a High-density polyethylene (HDPE) container used to package chew... View More

Product Safety Laboratory needed for Toxicology Testing to ISO 10903-5,
SVHC
Substances forbidden in EU Legislation
Non-Cytotocic
Latex free View More

ISO 17025 laboratory needed for electrical safety testing to Polyvinyl Chloride PVC skirting/Dado Trunking according to BS EN 50085Cable trunking syst... View More

Lighting manufacturer needs testing of LED light fixture to certifiy that it meets cleanroom ISO-5 and also biosafety levels 1 and 2. View More

Packaging testing needed for a container and packaging company for manufacturing process for several lines of containers that are specific to holding... View More

FDA GLP Preclinical Pharmaceutical Contract Research Organization CRO needed for ICH and FDA GLP in vivo toxicology study testing with the intravenous... View More

FDA compliant laboratory needed for FDA compliance and performance testing of nebulizer for working frequency, nebulization rate, particle size, oper... View More

Manufacturer needs electrical laboratory for IEC Testing of Welding machine test per tto IEC 60971-1, Semiconductor convertors. Identification code ... View More

Computer Hardware company needs certification laboratory for ETSI certification testing an e-CALL modem according to multiple ETSI standards includin... View More

India Laboratory Needed: Third-Party Laboratory needed for biodegradibility testing of plastic consumer products and food products made from HDPE / L... View More

Packaging laboratory needed for performance testing of paper soup containers with lids at the temperature of hot liquids / soups.
Sizing is 8,10,12... View More

Sports performance laboratory needed for proof of concept and safety testing of new sports product. View More

URGENT TESTING Large Medical Device Company needs Microbiology laboratory for EP/USP Ethylene Oxide sterilization validation testing for 4 different... View More

Cosmetics laboratory needed for consumer products testing of coffee scrub. Please specify the procedures and how much will it cost? View More

Cosmetics Laboratory needed for skincare product testing of gels for N-NITROSODIETHANOLAMINE (NDELA)
View More

Manufacturer of rubber parts needs materials laboratory for UL certification testing for a gasket. View More

Food analytical chemistry laboratory needed for Chemical validation testing of food processing chemicals. This involves us pulling diluted chemical s... View More

Biopharmaceutical company needs packaging laboratory for dessicant and humidity indicator card performance and seal strength testing



View More

Disinfectant Materials Compliance Test: Two (2) peracetic acid based disinfection materials for STAAT level II compliance.


View More

Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic r... View More

LONG TERM TESTING Company providing food safety and food quality services for export needs international food laboratory to test a variety of food qua... View More

Product Safety laboratory needed for EPA Testing: OECD skin corrosivity testing according to the following OECD guidelines - OECD 404, OECD 435, OEC... View More

Analytical Chemistry Laboratory needed for polyurea powder testing for residual formaldehyde:



View More

Food technology company needs Genetics Laboratory for DNA purification and QPCR analysis testing: Samples to be tested against 10 different primer/pr... View More

Cosmetics Laboratory needed for Beauty products testing on imported soaps & oils View More

Industrial Third-Party ISO 17025 Laboratory needed for IEEE, ANSI and UL Testing of 9 cables flammability and toxicity testing: FT4/IEE1202 flame pro... View More

ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR DIETARY SUPPLEMENT TESTING FOR MSDS AND CERTIFICATE OF ANALYSIS
Calcium (from Calcium Carbonate and Calciu... View More

Packaging Safety Testing: Non-reclosable child resistant packaging for pharmaceutical products View More

Automotive testing for back up lighting: SAE J593 View More

Electrical lab needed for: product safety requirements testing for equipment for electrical energy measurement and control. IEC and ANSI standards View More

Toxicology Laboratory needed for Ames Testing of toner Please let me know the cost and turn around time. View More

Crib manufacturer exporting to the US needs consumer safety laboratory for compliance testing to determine that crib models comply with the American... View More

Sports performance laboratory needed to have exercise equipment tested to current safety standards. View More

Sports performance laboratory needed for exercise cardio machine testing to determine muscle groups affected, safety of machine, weight limits of mach... View More

Laboratory needed for slip testing on our rubber acoustics product to DIN 51130, DIN 51097, BS 7976:2002, Surface Micro Roughness Testing View More

Product Safety Laboratory needed fr Product Safety Assessment (Toxicological Evaluation) of cosmetics (shampoo and conditioner) issued by doctor or p... View More

Pharmaceutical laboratory needed for non-clinical safety study of DNA vaccine. View More

Food laboratory needed for microbiology and shelf-life testing of refrigerated beverage to be sold at 7-Eleven stores. Product testing is divided into... View More

Environmental toxicology labroatory needed for OECD testing of organic chemical solution to OECD methods 430, 431, 435 and 404 View More

Medical Device Product Safety Laboratory needed for all biological testing for latex based medical devices with colorants needed for CE mark, FDA, IS... View More

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1... View More

LONG-TERM TESTING: Third-party consumer product laboratory needed for cooking oil filter performance testing. Requires food to be fried, oil filtered ... View More

Laboratory needed for Fire rating testing to NFPA 701, NFPA 705, German fire code, Australian fire code, and UK fire code.
Material is a nylon mesh m... View More

Pharmaceutical product safety laboratory needed for EPA 6-pack study on drug to determine safety level. View More

Toxicology laboratory needed for toxicity safety analysis on a non-nicotine vaporizer product. The safety relates to the vapor being inhaled, not the ... View More

Physical laboratory needed for custom wheel performance testing including safety, vibration and durability within its environment. View More

Materials Laboratory needed for ANSI Testing of 
Latex Coated Multipurpose Work Glove to be ANSI rated for Cut and Abrasion Resistance as demonstrate... View More

Laboratory needed for moringa testing to develop Certificate of Analysis specification sheet, and a MSDS/SDS View More

FDA GLP pre-clinical product safety laboratory needed to perform murine toxicity studies on biotherapeutic compound View More

Electrical laboratory needed for FCC Part 15 certification testing
View More

Electronic cigarettes and e-liquids company needs packaging laboratory for packaging testing of plastic bottles according to U.S. standard US 16 CFR §... View More

Medical Device Product Safety Laboratory needed for ISO biocompatiability testing of tattoo inks tested by ISO 10993-1 Biological evaluation of medica... View More

Toxicology laboratory needed to carry out MSDS toxicity tests and eco-toxicity studies of our new molecule used in DM disinfectants. These tests we ne... View More

Laboratory needed for Industry standards and safety testing for a piece of exercise equipment. No digital or electrical component to meet government a... View More

Toxicology Laboratory needed for EPA compliant in vitro testing for dermal and ocular toxicity: dermal sensitization, toxicity, and irritation/corros... View More

Europe environmental toxicology laboratory needed for insect repellent testing against mosquitos View More

Product Safety Laboratory needed for toxicology testing for ultrasound gel to ISO 10993 testing including cytotoxicity, sensitization and irritation (... View More

FDA registered Food Microbiology Laboratory needed for salmonella testing in thyme View More

Food laboratory needed for safety testing and hypoglycin testing of random packaging of Ackee to ensure safety for human consumption View More

Physical laboratory needed for Flammability testing for SDS purposes. 2-3 products in the retail cleaning category View More

Food laboratory needed for food colorant stability testing and comparison study of new natural colorant based of curcumin and betacorten to be used in... View More

Microbiology Laboratory needed for product development of Smokeless disinfectant pyrotechnic device that acts on fungi and bacteria broad-spectrum. th... View More

Importer needs food microbiology laboratory for microbial Challenge study for beverage 5 log reduction of pathogens: Ecoli O157:H7, Salmonella, Lister... View More

Medical Device Laboratory needed for testing to develop methods for airway obstruction / choking hazard analysis View More

Packaging laboratory needed for bottles and caps testing for bottled water. View More

FDA GMP clinical research laboratory needed for product safety testing of lip balm for possible allergies or irritation to the lips. View More

Orthopedics company needs medical device product safety laboratory for accelerated ageing testing of Orthopaedic implants in tyvek pouches including e... View More

USA Materials Laboratory needed for ANSI Testing for light transmission (A light) to ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicl... View More

India Food Microbiology Laboratory needed for Hepatitis Testing in juice for Hepatitis A
View More

Industrial cleaning equipment company needs virology laboratory for Virucidal efficacy testing on Avian influenza virus (AIV),, H7N1Noroviruses, Aden... View More

Biosafety Level BSL-2 Laboratory needed for conducting research on oncolytic viruses based on HSV1, Herpes Simplex Virus. We are looking for service... View More

Very Experienced, FDA certified Preclinical Contract Research Organization needed for in vivo preclinical studies for 2 phase subset of FDA biocompati... View More

Food Laboratory needed for a product development project to develop and produce milk made from sesame seeds (developing and customizing formulation), ... View More

Product Safety Laboratory needed for flammability and toxicity testing of windshield de-icer aerosol to understand hazards if accidentally punctured. View More

GMP / GLP Toxicology Laboratory needed for Evaluation of the systemic in vivo toxicology of water soluble nanoparticles and determination of LD50 by I... View More

Pharmaceutical company needs packaging laboratory for special packaging of three different types of bottles to 16CFR 1700.20, Testing procedure for s... View More

Materials Laboratory needed for ASTM Testing of linens to ASTM F739-99a/12e1 Standard Test Method for Resistance of Protective Clothing Materials to P... View More

Restaurant needs food laboratory for sushi rice testing for compliance to government regulations for food safety View More

EPA GLP Toxicology Laboratory needed for GLP Toxicity Study to for REACH dossier View More

LONG-TERM TESTING Gourmet food company interested in outsourcing it's monthly food lab microbial analysis to microbiology laboratory for 1) TPC 2) Bac... View More

Large Pharma needs FDA GLP-certified laboratory for nonclinical animal toxicity studies need for intranasal toxicity study in monkey.Determination of ... View More

Materials Laboratory needed for ANSI compliance testing of safety spectacles comply with ANSI/ISEA Z87.1:2015 standards for high-impact resistance. P... View More

LONG-TERM TESTING FDA recognized food laboratory needed for FDA required testing for Imported Frozen Tilapia Fillet View More

Consumer Products Laboratory needed for ISO 8124 or EN71 testing of soft play book for children 3+ to ISO8124, Safety of Toys or EN71. View More

Bioanalytical Laboratory needed for Analysis of recombinant bovine somatotropin in Ultra-High Processed UHT milk and possibly other dairy products View More

Analytical chemistry laboratory needed for quality and safety testing of moroccan oil View More

INDIA PHYSICAL LABORATORY NEEDD FOR AUTOMOTIVE SAFETY GLOVE TESTING: CUT RESISTANCE TO LEVEL 4 GLOVE (PPE'S) ABRASION RESISTANCE
BLADE CUT RESISTANCE... View More

Laboratory needed for testing of safety belts to ANSI 10.14, American National Standard for Construction and Demolition Operations - Requirements for ... View More

Toxicology Laboratory needed for REACH OECD polymer testing to OECD TG 118 (1996) method on phenolic syntans, melamine, dicyandiamide, naphthalene, ch... View More

Food Safety Laboratory needed for Ph level testing on sushi rice and results View More

INDIVIDUAL Consumer Product Safety laboratory needed for labeling claims and harmful substance testing in a hair thinning concealer product that has ... View More

Food laboratory needed for nutritional testing and food safety testing (microbiology and contaminants) analysis to Chinese standards. View More

Materials Laboratory needed for safety gloves testing to ASTM F2961 - Standard Test Method for Characterizing Gripping Performance of Gloves Using a T... View More

Cosmetics laboratory needed for product safety testing of FDA cosmetic/drug_ skin care detoxification lotion with 25 ingredients. The ingredient scon... View More

Materials Laboratory needed for biomechanical / biophysical testing for medical device burs:
¬Mechanical force of d¬evices test (compress¬ion,... View More

Materials laboratory needed for independent third party testing of laminate flooring for

1) Test for ortho phthalate plasticizers

2) Following ... View More

budding small business owner looking to start a clothing line needs consumer safety laboratory for children's safety testing for little girls aged 5-9... View More

Agrifood company needs Food laboratory for rice testing for glycemic index value View More

URGENT Jewelry designer who needs proposition 65 laboratory testing for lead, cadmium and phalates on jewelry Please call me right away if this is so... View More

Asia babycare company needs Consumer Products Laboratory for childcare product testing of Pacifier clips to adhere to DIN EN 12586, Child use and car... View More

Food laboratory needed for food packaging testing of packaged consumer food products for a measurement in parts per million of lead and/or an analys... View More

ISO/IC Packaging Laboratory needed for child-resistant packaging testing to testing method 16 CFR 1700.20,Testing procedure for special packaging View More

Europe Product Safety laboratory needed for new cream testing for introduction into the EU and international markets including Safety assessment, sta... View More

Toxicology Laboratory needed for toxicity tests and eco-toxicity testing of new molecule used in a Medical Disinfectant for new surfaces. These test... View More

START-UP Personalcare company needs Materials laboratory for Product Safety and GMO Testing of materials in tampons to understand if material is GMO ... View More

Preclinical laboratory needed for gene enhanced cell therapy toxicology study in immunocompromised rats, cannulated jugular vein injection of gene en... View More

Food microbiology laboratory needed for microbiology food safety testing of four food products soups shecrab. lobster bisque, clam chowder, onion sou... View More

Consumer Products Laboratory needed for ASCM (?) and the US Product Safety Commission testing child safety consumer panel testing of plastic grocery b... View More

US EPA certified Clinical Research Laboratory needed for insect repellent Testing of lotion for repellents against mosquitoes and ticks in human volun... View More

Electronics Laboratory needed for light testing to pass FCC part 15 , Radiofrequency Devices and CA Prop 65 before selling those products. View More

GLP certified Environmental Toxicology Laboratory needed for OECD toxicity studies on Botanical Insecticide biological product based on plant extract... View More

Small volume parenteral manufacturing plant needs product safety laboratory for toxicology testing, and interaction study (Migration study and Sorpti... View More

Cosmetics Laboratory needed for Cosmetics Stability Testing and Safety Assessment Tests including compatibility and challenge testing. View More

Consumer Products Safety Laboratory needed for product testing and certification for a children's toy/furniture product children's step/stool made of ... View More

Consumer Products Safety Laboratory needed for European Union Standard Certification testing of baby dummy holder/chain View More

Life Science Company needs Toxicology laboratory for in vivo toxicity studies in rats. View More

Consumer Product Safety Laboratory needed for safety assessments of handmade soaps to EU standards. View More

Food Laboratory needed for yoghurt testing for Nutritional values View More

Food Laboratory needed for testing about a dozen different processed/unprocessed foods for anything pcbs, heavy metals, toxins, pesticides,

Variou... View More

PACKAGING LABORATORY NEEDED FOR CHILD-SAFETY CAP TESTING View More

Laboratory needed for multiple testing on hand sanitizer 1. Glove Compatibility: The influence of Instant hand sanitizer on nitrile and latex gloves w... View More

Small farm needs microbiology laboratory for goat milk testing for brucelosis or any other bacterias or virus View More

Food microbiology laboratory needed for microbial testing of milk sweets TPC, TFC and Yeast and mold studies View More

LEGAL Law firm needs food laboratory for food deformulation analysis performed on a supermarket brand parmesan cheese product to determine the cellulo... View More

EPA GLP laboratory needed for biopesticide testing: OPPTS 885.3500 cell culture test for a plant virus as biopesticide View More

FDA GMP laboratory needed for cigar testing to FDA regulatory requirements:
Content of the follow HPHC in a format typical of other tobacco products... View More

FDA GLP toxicology laboratory needed for inhalation toxicity and genetic toxicity testing of a liquide-cigs, electronic cigarettes. It contains nicot... View More

Sports performance laboratory needed for certification testing of sports equipment that it is safe at preventing head injuries. View More

Environmental toxicology Laboratory needed for Pesticide Testing: 6-pack toxicology tests on minimum risk pesticide. View More

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More

Automotive cleaning solutions company needs environmental microbiology laboratory for OECD biodegradability testing on detergent to OECD method OECD ... View More

Environmental Laboratory needed OECD 310B testing of a new enzymatic detergent, along with a biodegradability certification for labeling conformance. View More

Certified Environmental laboratory needed for OECD testing of a new enzymatic detergent to OECD 310B View More

ISO 17025 accredited laboratory needed for fresh cabbage testing with validated methods for additives European Food Safety Authority Additives E904 an... View More

Consumer Products Toxicology Laboratory needed for toxicology studies on infant / baby products

1. Acute oral toxicity
2. Dermal Irritation
3. Ey... View More

LONG-TERM TESTING Asia Cosmetics Microbiology Laboratory needed for providing an annual quote for microbiological analysis in water and cosmetic gra... View More

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More

UK consumer products laboratory needed for ingredient and safety testing for face cream formulated with Aloe Arborescens. View More

Consumer Products laboratory needed for certification testing for CE mark. compliance to the General Product Safety Directive of sports equipment. View More

URGENT Cosmetics manufacturer needs USA analytical chemistry laboratory for artificial colour analysis in lip gloss. Please specify costs and time View More

Certification laboratory needed for National Fire Protection Assocation certification testing to certify a boot style to NFPA 1977 standard. View More

Moisturizer company needs CPSC or ISO/ IEC 17025:2005 consumer products laboratory for retailer legal obligations compliance testing including micr... View More

Food Laboratory needed for testing about a dozen different processed/unprocessed foods for anything unnatural, pcbs, heavy metals, toxins, pesticides,... View More

Food Product safety laboratory needed for product testing & labeling verification testing for a line stage edible and animal safe simulated blood prod... View More

Metal FInishing company needs toxicology laboratory for toxicity studies of liquid products for Eye irritation, Skin irritation, Acute oral toxicity, ... View More

Consumer Products laboratory needed for certification testing for CE mark. compliance to the General Product Safety Directive of sports equipment. View More

Accredited laboratory needed for SAE J1401 / FMVSS106 brake hose testing.. Interested in doing a full validation on 5 different brands/types of brake... View More

Cosmetics Clinical Research Laboratory needed for product safety testing of new topical hair solution View More

Cosmetics Laboratory needed for Lead Content Testing (that meets California Prop 65 guidelines) for cosmetics consumer products. Please provide curren... View More

Consumer Products Safety Laboratory needed for safety and quality testing of Baby Diapers prior to importation from China. View More

Fashion company needs a metallurgical laboratory for testing a few sterling silver jewelry pieces to determine their compliance with the .925 metal re... View More

Food laboratory needed for safety testing of Imported matcha green tea View More

Product Safety laboratory needed for testing packages for new substances under Globally Harmonized System of Classification and Labeling of Chemicals ... View More

Consumer Products Laboratory needed for baby lotion testing to ensure it is safe to use and hypoallergenic. View More

FDA GLPtoxicology laboratory needed for inhalation toxicity and genetic toxicity testing of a liquid electronic cigarettes. It contains nicotine 0mg. View More

Consumer Products laboratory needed for quality control testing of handmade incense sticks. View More

India Foodpackaging laboratory needed for testing printing inks for food packagingfor migration of TNPP in topline ink @20-30ppm (TNPP -TRIS NONYL PH... View More

Food Laboratory needed for sushi rice pH and shelf-life stability testing. View More

Accredited laboratory needed for SAE J1401 / FMVSS106 brake hose testing.. Interested in doing a full validation on 5 different brands/types of brake... View More

Materials laboratory needed for PTFE (teflon) powder analysis to determine the level of any residual contaminants for filing a FDA GRAS notice . The... View More

LEGAL Attorney for consumers needs food laboratory for identity testing of contaminant found at the bottom of can View More

Food analytical chemistry laboratory needed for 4-Hexylresorcinol testing for in Crustaceans for compliance to Canada regulations. View More

Pharmaceutical company needs acoustics laboratory for ultrasound gel testing to determine sound velocity, acoustic impedance, sound attenuation View More

LONG-TERM SHELLFISH PRODUCTION FACILITY NEEDS FDA GMP TOXICOLOGY LABORATORY FOR SHELLFISH TESTING TO SELL PRODUCT TO USA. TESTING FOR TOXINS , DOMOI... View More

GLP Toxicology Laboratory needed for six-pack toxicology study to support pesticide registration framework on one single active ingredient. Please pro... View More

FDA Laboratory needed for FDA compliance testing and certification of food containers for 2 productssourced from China.
1) Hip flask, inside SS 304
... View More

Analytical chemistry laboratory needed for phthalates testing in bottled drinking water at different temperatures View More

LEGAL California attorney needs textile laboratory for fire retardation / flammability testing of fabric used in shirt. Attorney who is thinking abo... View More

Food Laboratory needed for food contact surface testing of PTFE plastic powder r to determine if it is suitable to be used in food. Please provide quo... View More

Consumer Products Laboratory needed for Footwear physical test, colorfastness, full grain leather test, California prop 65 View More

India consumer products laboratory needed for development testing on herbal mosquito repellent voporizer to adjust the evaporation rates. Currently ... View More

USA FDA GMP Veterinary Medicine Laboratory needed for pet/animals product testing of veterinary medical device which is using cold plasma technology.... View More