Most Recent Oil and Petroleum Laboratory Test Requests

Contract Laboratory has received the following Oil and Petroleum Laboratory Test Requests which need to be fulfilled! These Oil and Petroleum Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Oil and Petroleum Laboratory Test and Scientific Research. If you need a Oil and Petroleum Laboratory, please Submit a Oil and Petroleum Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

SAE Gasoline Additive Testing

Description:

URGENT Automotive Laboratory needed for SAE testing service of a new additive for gasoline engine according to standard SAE-1321 using gasoline as baseline and then comparing statistical report to determine wjether there is gasoline savings or not in a sm...

Requirements:

dynamo testing, gasoline eficiency, CO2 emissions, product certification for compliance of SAE-1321

View More


Title:

Lubricant DIN Testing

Description:

Materials Laboratory needed for DIN Testing to the following standards:
TEST NORM
DROPPING POINT DIN 51801, T. 2
DROPPING POINT DIN ISO 2176
BREAKING POINT (75 G/M²) DIN EN 12593
PENETRATION ...

View More


Title:

OECD Reproductive Toxicity Study

Description:

Toxicology Laboratory needed for reproductive toxicity study to Category 2 OECD 414, 443, 422 of lubricant product.

Requirements:

Please submit quote.

View More


Title:

ASTM Petroleum Distillate Testing

Description:

Oil Laboratory needed for ASTM substance identification testing on petroleum samples to ASTM D5292 (NMR) Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy. The petroleum samples are:
Distillates (...

Requirements:

Please share the quotation for the same and Turnaround time for analysis.

View More


Title:

Lamp Fuel Burn Comparison Study

Description:

Laboratory needed to do benchmark/comparison testing of patio lamp fuels. We would like to test/video a number of patio lamps simultaneously, videoing the overall burn time, assessing flame height and soot formation, and perhaps providing analysis of the...

View More


Title:

Petrochemical Testing

Description:

Oil Laboratory needed for petrochemical testing to analyze the end product of downstream petroleum products (diesel, gasoline, LPG, Lubricants, kerosene )

View More


Title:

Drilling Fluid and Cementing Additives Quality Testing

Description:

Oil Drilling Operation needs Oil Laboratory for mud chemicals (drilling fluid) quality and cementing additives quality testing:

In order to verify the cementing additives dosage & effectiveness to give us accurate measures for the slurry properties (...

View More


Title:

Gas Analysis / ASTM Hydrocarbons

Description:

Industrial Laboratory familiar with ASTM and ISO standards for measuring hydrocarbon samples needed for gas analysis to the API 617 datasheet which offers the standard composition format against which all centrifugal OEMs: As a reference, the template for...

Requirements:

We want a lab that has intimate familiarity with the relevant ASTM and ISO standards for measuring hydrocarbon samples

View More


Title:

Grease Testing

Description:

Industrial Laboratory needed for V2F rig testing for grease

View More


Title:

Crude Oil Physical Properties

Description:

Oil Laboratory needed for physical properties testing of crude oil including
1-Crude oil API & Specific gravity.
2-Crude oil salt content.
3-crude oil sulfur content.
4-crude oil Bs & W(i.e Basic sediments and water/ centrifugal.
5-crude oil vis...

View More


Title:

Hydraulic Fluid Contaminant Identification

Description:

Forensics Laboratory needed for identification of contaminant in SAE10W-30 oil hydraulic fluid that caused hydraulic system in a farming machine became contaminated.

Requirements:

Please provide estimate of cost.

View More


Title:

Biodegradability Testing

Description:

Chemical Manufacturer needs MPA Testing and OECD Biodegradability Testing of chemical as per OECD/ASTM D 2667-95(2008) Standard Test Method for Biodegradability of Alkylbenzene Sulfonates. MPA Testing is
basically product content water ,glycol , surfacta...

View More


Title:

Biodegradability Testing

Description:

Environmental Laboratory needed for biodegradability testing for oil spill chemical concentrate product

View More


Title:

Hydrocarbon Utilizing Microorganisms

Description:

Microbiology Laboratory needed for testing for Hydrocarbon utilizing microorganisms or HUM Bugs/HUB bacteria

Requirements:

None

View More


Title:

Oil Sands

Description:

Oil Laboratory needed for testing 30 samples for the rheological and organic geochemical analysis on oil from oil sand.

View More


Title:

Lube Base Oil Testing

Description:

Oil Laboratory needed for total saturates testing in Lube Base Oils.

View More


Title:

ANALYTICAL TESTS

Description:

Materials Laboratory needed for REACH compliant testing to the following 3 ASTM Standards

1.ASTM -D86, Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
2.ASTM D3710 Standard Test Method for Boiling R...

Requirements:

1.Analytical testing with Interpretation.
2.REACH compliant.
Please confirm.

View More


Description:

South America Oil Laboratory needed for Lubricant and Fuel Oil Analysis

View More


Description:

LONG-TERM TESTING Aerospace Laboratory needed for ASTM Jet fuel testing (Jet-A) for its lower heating value (net heat of combustion) using experimental methods. There would be roughly 15-20 samples and if possible, someone located close to southern calif...

Requirements:

ASTM standards used, bomb calorimeters acceptable.

View More


Description:

Oil Laboratory needed for grease testing to the following standards:
- V2F grease leakage, EN-14865-2
- mechanical stability, EN-14865-2
- mechanical stability, NF F 19-502
- ability to lubricate, EN 14865-1
- R2F, NF F 19-504
- dynamic bleeding...

Requirements:

Please inform us about your prices, volume of sample for test, time, etc.

View More


Description:

Oil Laboratory needed to conduct petroleum testing to a large number of Institute of Petrleum IP testing methods including: IP 599, IP 590, IP 577, IP 564, IP 524, IP 475, IP 447, IP 424, IP 373, IP 367, IP 243, IP 225.

Requirements:

IP testing methodologies for petroleum: IP 599, IP 590, IP 577, IP 564, IP 524, IP 475, IP 447, IP 424, IP 373, IP 367, IP 243, IP 225.

View More


Description:

Oil Analytical Chemistry Laboratory needed for ASTM Testing of ethanol to ASTM D7347 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography. This test method is an analytical method is therefore...

Requirements:

ASTM D7347

View More


Description:

Organic geochemical laboratory needed to analyse oil sand for its bitumen content, saturate, aromatics, resins and asphaltenes content (using SARA analysis) and heavy metals present in them.

View More


Description:

Oil Laboratory needed for electrical conductivity of a liquid chemical hydrocarbon mixture in accordance with ASTM D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

Requirements:

Electrometer used should be calibrated.

View More


Description:

Oil Laboratory needed for Bromine number testing for oil samples.

View More


Description:

ISO 17025 Automotive Laboratory needed for interlaboratory comparisons according to ISO 16232 Road vehicles -- Cleanliness of components of fluid circuits/ ISO 4405 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination...

Requirements:

To be accreditated according to ISO 17025

View More


Description:

Organic geochemical laboratory needed to analyse oil sand for its bitumen content, saturate, aromatics, resins and asphaltenes content (using SARA analysis) and heavy metals present in them.

View More


Description:

PRODUCT DEVELOPMENT Laboratory needed for pilot plant scale polymerization trials to develop new products of a reactor system of 50-100 gallons size capacity. Since the pentane addition is necessary to the polymerization, the reactor needs to be pressuriz...

Requirements:

Preferably the reactor for polymerization would have the following specifications: Volume: 50 to 100 gallons, Length/diameter ratio: 1.6 to 1.85, Pressure rated: 150-300 PSI, Including baffles, Max temperature: 130°C, Temperature control: ± 0.5°C, Sample/...

View More


Description:

Oil Laboratory needed for ASTM Testing to ASTM 2007- Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

Requirements:

None

View More


Description:

URGENT Materials Laboratory needed for ASTM Testing of mineral and steam turbine oil to the following ASTM Standards:
ASTM D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

ASTM D2272 Stan...

View More


Description:

Large corporation needs laboratory for testing of lubricating oils for example: viscosity, ICP metals, KF Water, flash point, pour points etc..

Requirements:

Please provide price list.

View More


Description:

Oil Laboratory needed for conducting a research and stability study on Propane (LPG) to determine it's emission reduction through the use of a propane additive. Additionally looking at stability as a test also. Before and after treatment with the addit...

View More


Description:

Oil Laboratory needed for ASTM hydrocarbon testing of petroleum products to IP 436 / ASTM D6379 Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates?High Performance Liquid Chromatography Method with Refractive Index Det...

View More


Description:

Large oil company needs Laboratory for OECD 301B; CEC L-103-2 or CEC L-33-A-93 biodegradability testing for lubricant/grease products. CLP certification is preferred.

Requirements:

CLP certification is preferred. Also laboratories in EU are preferred

View More


Description:

Mining company needs Geology Laboratory for core testing of 30 core samples for mines

View More


Description:

URGENT Oil Laboratory needed for the testing of dielectric fluid (75% Alkyl Benzene, 25% Polybutene) for:
Fluid density at various temperatures
Dissolved gas analysis
Specific heat
Thermal conductivity
Bulk Modulus
Viscosity
Two samples

Requirements:

We need a cost estimate for this analysis as soon as possible . Fluid will be sourced in Los Angeles, but should be able to transport if necessary. Quote needed 11/14/17

View More


Description:

URGENT Large oil company needs GLP laboratory REACH testing services for the full suite testing required for a substance at the 1-100 tonne category. We are already completing the analytical substance sameness testing so just need the full suite of phys ...

Requirements:

IMPORTANT NOTE: Please specify if you have the testing capacity to do this quickly? If so, can you please send me an estimated amount this would cost for the testing and also estimated timeline to get it done (i.e. can it be completed by early 2018?)?

View More


Description:

LONG-TERM TESTING Engineering company needs oil laboratory for oil testing and studies to support Master Service Agreement (MSA) qualification with a major oil company. The analysis required is

1- Chemical/Geochemical Analyses
2-:Elemental Sulfur/Sul...

View More


Description:

NABL materials laboratory needed for grease testing.

View More


Description:

Refinery needs materials laboratory needed for determining Mettler melt point in wax

Requirements:

None

View More


Description:

Oil laboratory needed for oil ISO and DIN testing including the sampling of gas should based on ISO 10715:1997 standard. The analysis should be as per ISO 6976.
ULSD analysis DIN51900, DIN51757 or ASTM D240, ASTM D1298 standard.

Requirements:

The sampling will be at Saudi arabia

View More


Description:

Oil laboratory needed for fuel additive testing for efficacy concerning lowering of Diesel Particulate Matter and other emissions such as NOX. We would also like to have them conduct a fuel efficiency test as well to ascertain if and how much the additi...

Requirements:

Needs to be a credible laboratory.

View More


Description:

Oil laboratory needed for testing to determine the pour point for lubricating oil

View More


Description:

URGENT Oil laboratory needed for water (PPM Wt.) content testing in Propylene which is an liquefied petroleum gas

View More


Description:

Research facility needed to determine the reaction kinetics for the thermal cracking of a petroleum oil

Requirements:

All info to remain confidential. Lab to exist in the USA.

View More


Description:

Oil laboratory needed for no-harm performance testing of a blend an additive used in propane fuels.

View More


Description:

Environmental toxicology laboratory needed for OECD testing to classify water soluble, anhydrous PAG lubricant hydraulic oil as Environmentally Acceptable Lubricants (EAL) according to 4 OECD standards: OECD 301F Ready Biodegradability
OECD 201 Freshwat...

View More


Description:

Physical laboratory needed for SAE testing on fuel lines to SAE J2027 Standard for Protective Covers for Gasoline Fuel Line Tubing

View More


Description:

Laboratory needed to measure thermo-physical properties of fuel additive mixtures containing ethylene, vinyl acetate and cyclohexane. Properties to measure include: critical point determination, viscosity of mixtures, density of mixtures, vapour pressure...

View More


Description:

Oil laboratory needed for analysis via 2D GC/MS (GC-GC/MS) gas chromatography with mass spectrometry of synthetic hydrocarbon oil mixture for the molecular weight of the components and to determine whether the components are (a) linear (b) methylated (c) ...

View More


Description:

LONG-TERM TESTING Large corporation needs laboratory for ASTM and ISO Testing of natural oil to the following standards: ASTM D5185 (total phosphorus content), ASTM D4629 (total nitrogen content), AOCS Official Method Cc 13i-96 (chlorophyll pigments), IS...

Requirements:

IMPORTANT NOTE: Quote must be included with response.

View More


Description:

Large oil company needs laboratory needed for gas analysis to determine the water content in gas. Gas water content expected to be around 2-3,5 %vol. H2S - 2-4%Vol

Requirements:

Method should be certified.

View More


Description:

Oil and petroleum laboratory needed for contamination analysis of an oil used for rust prevention on engine parts,

View More


Description:

Oil laboratory needed for refrigerant systems compressor oil analysis of four mechanical HVAC compressors.

View More


Description:

Laboratory needed for EPA fuel efficiency certification testing of truck and large engine as well as emissions testing with use of a liquid organic engine surface agent. EPA certification and industry certification required proving that emissions are lowe...

View More


Description:

Large oil company needs oil laboratory for performance testing of chainsaw lubricants for sliding, wear, etc.

View More


Description:

Large oil corporation needs laboratory for OECD biodegradation testing of a biodegradable, non-soluble, vegetable based lubricant oil with performance additives to OECD 301B Biodegradation Test CO2 Evolution.

View More


Description:

Petrochemical company needs laboratory for ASTM sand slurry testing for ultra-high-molecular-weight polyethylene UHMWPE per ASTM 4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

Requirements:

Able to do testing according to ASTM 4020

View More


Description:

University researcher needs analytical chemistry laboratory for chemical composition of diesel fuel including analysis for BTX (Benzene, Toluene, and Xylene)

Requirements:

Chemical composition of diesel fuel
BTX content in diesel fuel

View More


Description:

Oil and petroleum laboratory needed for moisture analysis of gasoline used as fuel.

View More


Description:

Oil and petroleum laboratory needed for ASTM testing of ten hydraulic oils to ASTM D3427 Air Release Properties of Hydrocarbon Oils. The viscosity range requires that they be tested at 50C.

Requirements:

Please provide cost.

View More


Description:

Oil and petroleum / microbiology laboratory needed for jet fuel (Jet A1) testing for microbial growth and presence of fungi.

View More


Description:

LONG-TERM TESTING Geotechnical laboratory needed for drill core testing for open thin section preparation from drill cores including EMPA analysis in open thin sections, whole rock chemistry analysis (+REE), zirkone, ortite, monazite, and apatite.

Requirements:

This is a PhD project, therefore at first, amount of samples will be up to 20-30. Please also inform if there would be a possibility to participate in the analytical process, in a form of short internship or else. Project should be continued in cooperatio...

View More


Description:

LONG TERM TESTING Oil laboratory needed for ASTM testing of petroleum / petrochemical products to determine hydrocarbon types present in middle distillates via mass spectrometry (ASTM D2425) as well as testing for fluorine and chlorine via combustion ion ...

Requirements:

Same day turnaround (OT approved)
ASTM D2425, Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
ASTM D7359 (F, Cl), Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtu...

View More


Description:

Materials laboratory needed for ASTM testing of grease / lubricant for carbon residue. Reference samples as per MRC Test / ASTM D-4530, Low Carbon 0.3 %c

View More


Description:

Laboratory needed for research experiment for the evaluation of an agrocrop-based absorbent's effect on the flash point of oils.

View More


Description:

Environmental microbiology laboratory needed for OECD biodegradability testing of industrial lubricants to OECD 301B Biodegradation Test CO2 Evolution

View More


Description:

Oil laboratory needed to provide certification of dielectrical insulating transformer oil to US standards.

View More


Description:

Automotive parts manufacturers needs laboratory for accelerated againg of test oil sa including GC-MS headspace and GC-MS direct injection (after dilution by dichloromethane) 2 test oil sa) 0 days and after 7 days heat agingb) 0 days and after 7...

Requirements:

Pending the results we may request more oils or different periods for testing.

View More


Description:

Petroleum analytical chemistry laboratory needed for deformulation and reformulation of liquid aliphatic hydrocarbons fuel additives.

Requirements:

Please provide cost.

View More


Description:

Oil Laboratory needed for ASTM testing of dielectric mineral oil to ASTM D 3487-09 Specification for Mineral Insulating Oil Used in Electrical Apparatus

Requirements:

ASTM D 3487-09

View More


Description:

Engineering laboratory needed for measuring the free flowing oxygen content of a vapor stream used in the petroleum industry.

Requirements:

Houston.

View More


Description:

LONG TERM TESTING: Large corporation in India needs oil laboratory for various testing of petroleum products & chemicals samples

View More


Description:

Oil / petroleum laboratory needed for ASTM testing of natural gas to ASTM 5504-98 for total sulfur, specific gravity, dry heating value in BTU/lb and BTU/scf (dry), wet heating value in BTU/lb and BTU/scf (wet), and percentage carbon, nitrogen, and oxygen...

Requirements:

Please quote for the following testing package on natural Gas samples.

This would be for five or six samples starting in April.

View More


Description:

Internationally recognized laboratories needed for benzene comparison study of fuel efficiency in engines A-80 & A-92 of gasoline imported from different countries for environmental and efficiency in engines.

Requirements:

Gasoline A-80 and A - 92 comperative study

View More


Description:

Environmental toxicology laboratory needed for OECD environmental fate study: biodegradation to OECD 301C / 301F method Ready Biodegradability Tests

View More


Description:

Oil refinery company needs analytical chemistry laboratory for silicon dioxide testing for determination of % purity (Silicon Dioxide)
Sample is synthetic amorphous silica used as antiblocking agent

Requirements:

Determination of % purity (Silicon Dioxide)
Sample is synthetic amorphous silica used as antiblocking agent

View More


Description:

Oil laboratory needed for pour point verification testing of a fatty acid based emulsifier using ASTM D97 compared to ASTM D5949. Result for both.

Requirements:

ASTM D5949
ASTM D97
Houston, TX area preferred.

View More


Description:

Motor oil laboratory needed for JASO T903 (DFI, STI, etc.) testing of automotive oil.

Requirements:

Automotive Engine Oil Testing
JASO T903 Tests (DFI, STI etc)

View More


Description:

Petroleum laboratory needed for ASTM Testing: oil particle count analysis according to ASTM D6786.

Requirements:

Local to Stoney Creek, ON, within 100km

View More


Description:

LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and natural gas industries -- Composite repairs for pipework -- Qualification and design, installation, test...

Requirements:

Houston testing preferred

View More


Description:

Large petroleum company needs Industrial chemistry laboratory for ASTM petrochemical testing to ASTM D8031-16 for acid number of terephthalic Acid (TA) by automatic potentiometric titration.

Requirements:

ASTM D8031-16

View More


Description:

LONG TERM. Oil and petroleum testing laboratory needed for ASTM testing of oil samples in the Middle East.

View More


Description:

Fuels laboratory needed to separate jet fuel from MIL-PRF-6081 Grade 1010.

Requirements:

MIL-PRF-6081 Grade 1010 is contaminated with 5% jet fuel.

View More


Description:

Oil Laboratory needed for Petroleum quality testing prior to export from Yemen

View More


Description:

LONG-TERM TESTING Oil Laboratory needed for hydrocarbon testing to quantify the amount of petroleum hydrocarbons (Semi volatile- kerosene, oil, diesel etc..) in soil and sediment samples.I

View More


Description:

Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding of the emulsion proved elusive plus other problems were hard cold starts, check engine light, corrosion, s...

View More


Description:

Oil Laboratory needed for DIN grease testing along with determination of rheological resistance.

Requirements:

Delimon-Rheometer equipment, DIN 51816-1

View More


Description:

Oil Laboratory needed for DIN Grease Testing to DIN 51816-1 Testing of Lubricants; Conveying Characteristics of Greases; Determination of the Rheological Resistance by the Shell-DELIMON- Rheometer

Requirements:

Delimon-Rheometer equipment

View More


Description:

Oil laboratory needed for hydrocarbon testing: surfactant/solvent formulation diluted in water at various concentrations to determine the surface tension as well as solvency of hydrocarbons - petroleum oil.

View More


Description:

Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance

View More


Description:

URGENT Oil Laboratory needed for American Petroleum Institute API light, medium, heavy and extra heavy oil testing. Need 15 samples analyzed 5 initial, 5 mid level refinement; 5 final refinement. What volume is needed. What is the cost. This is going ...

Requirements:

Requirements are for the following sample assessment:
Oil will be certified according to http://www.petroleum.co.uk/api
API gravity = (141.5/specific gravity) - 131.5
Conditions for oil include:
Light oil - API>31.1
Medium oil - between 22.3 and 31....

View More


Description:

Energy company needs laboratory to test oil based drilling fluids from 4 different drilling rigs in Wyoming for aniline point.

Requirements:

Provide information on sample size required and any specific requirements concerning shipping containers.

View More


Description:

LONG-TERM TESTING: EPA GMP environmental laboratory needed for routine analysis of marine oil for two attributes:
1. EPA 1613 rev B for dioxins/furans
2. EPA 1668 rev A for PCBs

View More


Description:

Oil laboratory needed for ASTM gasoline testing for specific heat and thermal conductivity to: Specific Heat Capacity by ASTM D2766 versus temperature of gasoline sample.
Thermal conductivity by ASTM D7896 versus temperature of gasoline sample.

Requirements:

Range of temperatures yet to be determined.

View More


Description:

Ongoing opportunity to provide a transport company shipping Basis Jet A1 with Pre Discharge test and after discharge to conduct recertification test 'B '

View More


Description:

Oil Laboratory: needed for gasoline testing to determine the pKa of a commercial gasoline from California.

View More


Description:

Renewable Energy Company needs pyro oil produced from tire pyrolysis tested for sulfur concentration.

Requirements:

Could you provide us the method, price per sample and volume of the sample you need for the analysis?

View More


Description:

Large oil company needs Oil Laboratory for Quantitave diamondoid GC-MS analysis

Requirements:

I would like to learn the price quote for condansate and petroleum analysis. Identify whether column chromatograpy is needed before GC-MS analysis

View More


Description:

Large oil company needs Polymer Science Laboratory for polypropylene copolymer analysis for % ethylene content

View More


Description:

Large energy corporation needed materials laboratory for Corrosive Sulfur Test according to DIN 51353, Testing of insulating oils; detection of corrosive sulfur; silber strip test

View More


Description:

LONG-TERM TESTING Analytical Chemistry Laboratory needed for qualification testing to determine inhibitor (MeHQ) and PTZ (Phenothiazine) in acrylates by HPLC. We expect to have 2 samples ready for this test the week of 11/14-18. These first two samples ...

Requirements:

Please contact us for a copy of a preferred method and to discuss cost and turn around time.

View More


Description:

Environmental laboratory needed for surface water testing of 4 acre lake displaying a very small diesel oil pollution bloom from run off surface water in the vicinity. Need lake water tested before stocking it with expensive carp.

View More


Description:

Oil Laboratory needed for recovered hydrocarbon / oil testing 1. Standard and RTFOT viscosity tests in accordance with latest edition of ASTM D3381 or AASHTO Designation: M 226-80 plus one at 135 deg. C
2. Penetration test ASTM D 946 and AASHTO M 20 (Pe...

Requirements:

recovered hydrocarbon/oil.

View More


Description:

Laboratory needed for hazardous waste testing: Tar Fuel burn test for total nitrogen

Requirements:

This tar is considered a hazardous waste. I need a total Nitrogen test that can measure nitrogen to <.002%.

View More


Description:

Oil laboratory needed for Fuel testing on a pump-grade gasoline: all tests need to be ASTM certified: Ethanol, Benzene, Total aromatics, oxygen, olefins, RON, MON, Dry Vapor Pressure Equivalent and Reid Vapor Pressure

Requirements:

All tests need to be ASTM certified: Ethanol, Benzene, Total aromatics, oxygen, olefins, RON, MON, Dry Vapor Pressure Equivalent and Reid Vapor Pressure

View More


Description:

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1. Temperature & latitude test as per DO 160 Section 4 Category -B3.

2. Temperature Variation test as p...

View More


Description:

Oil laboratory needed hydrocarbon testing with it's interaction with various solvents an process streams including analysis of hydrocarbon solutions with elemental sulfur. Also, sulfur purity tests and the ability to work with pure elemental sulfur and i...

View More


Description:

Laboratory needed for gas flooding-reporting on slim tube, gas injuction and flow assurance

View More


Description:

Oil Laboratory needed for cetane testing for additives including
specific gravity
density
cloud point and flash point
cetane number and cetane index

View More


Description:

Oil laboratory needed for ASTM Flashpoint testing for Diesel fuel to comply with ASTM standards

Requirements:

to comply with the ASTM standards

View More


Description:

Laboratory needed for ASTM Testing of aggregates used in oil pipeline operations to the following standards ASTM:Cement:ASTM C150 ? Standard specification for Portland cement Aggregates:ASTM ?294, ?295 - Standard Guide for Petrographic Examination of Agg...

View More


Description:

Oil Laboratory needed for ASTM oil testing. Need No 6 Oil tested for kinematic viscosity at 40C and density.

Requirements:

ASTM preferred

View More


Description:

Materials laboratory needed for propylene testing for the Purity of Liquid propylene

Requirements:

The purity of liquid propylene and maybe some other products in the propylene

View More


Description:

GLP Toxicology Laboratory needed for petroleum/oil based organic pesticide testing:GLP tests in terms of Toxicology and Residue analysis.Please provide quotation

View More


Description:

Metropolitan New Jersey area laboratory needed for Butane Gas Testing for purity, aromatics, benzene, olefins per ASTM D2163 and sulfur per ASTM D6667-10. Two samples will be submitted each month through the winter.

Requirements:

We prefer to use a lab that is within a 2 hour drive from Carteret, NJ to avoid HAZMAT shipping.

View More


Description:

Materials laboratory needed for thermal conductivity testing of thermal paste used in computers, and we need to measure the actual thermal conductivity for the sale of goods. Currently developed several modifications to the calculated thermal grease therm...

View More


Description:

Large petroleum company needs materials laboratory for ASTM Testing of terephthalic acid to ASTM methods

ASTM D8031-16 ? Acid number for TA by potentiometric titration
ASTM D1209-05 ? Color of clear liquids (Pt- Cobalt Scale)

Please provide

- ...

View More


Description:

Laboratory needed for ASTM Testing of upgraded athabasca bitumen to astm d 2887, Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography4530, 5291, 2007 and 4052

Requirements:

astm d 2887, 4530, 5291, 2007 and 4052

View More


Description:

Laboratory needed for Feasibility study for syn-gas production using a new catalyst, Catalytic activity of NixA1BEA and NixSiBEA. Fixed bed reactor with a fixed total gas flow run until catalyst activity is significantly reduced
First test: a 2:1 molar r...

Requirements:

At this point we need a simple budgetary price +/- 50%.

View More


Description:

Europe materials laboratory needed for ASTM and DIN Testing of lubricant oils to Copper Corrosion ASTM D 130/12 Aluminium Corrosion DIN EN ISO 6270-2 Ash content: DIN EN ISO 6245 Flock Point DIN 51351

View More


Description:

LONG-TERM TESTING NYC Metrolpolitan area Laboratory needed for ASTM Testing to Test Butane properties (purity, aromatics, benzene, olefins) per ASTM D2163 and Sulfur per ASTM D6667-10

Requirements:

Prefer to hand deliver samples to avoid HAZMAT Shipping. Willing to deliver within 2 hours of Metropolitan NYC

View More


Description:

Oil technology development company needs toxicology laboratory LC 50 and LD 50 testing with some controlled versions of HF acid. Essentially, the blends we want to test are compounds that control the acidity of HF and show an ambient pH value of as high ...

Requirements:

LD 50 Test Data
LC 50 Test Data

View More


Description:

Petrographical Analysis on 10 samples of Feldspar
Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Clay
Geochemical Analysis ICP-AES + ICP-MS on 20 samples of Kaolin

Requirements:

Quantify major and minor éléments present in those samples in order to determine their degree of purity

View More


Description:

LONG-TERM TESTING Oil Laboratory needed for long-standing motor analysis for metal and physical properties on motor oil performed every 30,000 miles.

Requirements:

We need to have a standing order for such testing.

View More


Description:

Fuel system company needs laboratory experienced in aggressive fuel fuel system compatibiligy for chemical analysis of sour/contaminated gasoline to detect presence of the following:
- POM plastic
- stainless steel
- flourocarbon elastomer
- flourosil...

Requirements:

I would like to discuss my request with one of your chemists that has experience with fuel component compatibility in aggressive fuels for designing validation testing of a fuel pump.)

View More


Description:

Laboratory needed for ASTM engine coolant testing to ASTM D7304, Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

View More


Description:

Oil Laboratory needed for gas testing to be done on the gas sample with operating pressure 80 ? 124 Kg/cm2g & Operating temperature 152 Deg C (Temperature will become ambient due to equalization with surroundings). . Please find the brief description abou...

Requirements:

Sr. No. Composition Parameters
1 Nitrogen
2 CO2
3 H2S
4 H2O
5 C1
6 C2
7 C3
8 i-C4
9 n-C4
10 i-C5
11 n-C5
12 n-C6
13 n-C7
14 n-C8
15 n-C9
16 n-C10
17 n-C11
18 n-C12
19 n-C13
20 n-C14
21 n-C15
22 n-C16
23 n-C17
24 n-C18
25 n-C19
26...

View More


Description:

Petroleum laboratory needed for Texas Department of Transportation Testing to Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS - Test for water content, % by mass.

Requirements:

Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS

View More


Description:

Petroleum research & development laboratory needed for natural gas treatment research study. Our requirement is to check the efficiency of chemical for H2S Scavenging for crude natural gas. The natural gas stream contains H2S Concentration in crude natura...

Requirements:

The laboratory needs to be approved by Government of India.

View More


Description:

Oil Laboratory involved in proficiency testing needed for petrol analysis, diesel for distillation characteristics using optidistil

Requirements:

The laboratory should be the one that is involved in profiecency testing

View More


Description:

Materials laboratory needed for ASTM or IEC Dielectric Constant Testing for Quench Water, Gasoline, Steam Condensate, Hydrocarbon, and other refineries/petrochemical product.

Requirements:

ASTM, IEC, or any other international standard for this testing

View More


Description:

URGENT Materials Laboratory needed for ASTM Testing of Petroleum to ASTM D2766 Standard Test Method for Specific Heat of Liquids and Solids. at 60, 70, 85, 100, 115, 170, and 190 °C

Requirements:

Rapid turn-around - 24 hour if possible

View More


Description:

Large oil company needs Materials Laboratory for ASTM Testing of Polyurea Electric Motor Grease that requires the ASTM D3336, High Temperature Bearing Test.

Requirements:

In need of lab to run the ASTM D3336.

View More


Description:

Oil Laboratory needed for Petroleum coke testing

View More


Description:

Oil laboratory needed for petroleum and oil testing. Checking mixed xylene and n-Heptane for sulphur content and tetra ethyl lead content

Requirements:

laboratory testing for petrolium products and oils

View More


Description:

Oil Laboratory needed for butane analysis at a geothermal power plant. Test for purity and contaminates in the butane

Requirements:

Able to collect butane from high pressure vessels ranging from 45 to 90 PSI and temperatures of 90 to 160 degrees Fahrenheit

View More


Description:

Oilfields company needs Materials laboratory for Chemical Testing and Mechanical Testing for polyurethane roller material

Requirements:

What is the Coupon size needs to required to performed Machnical Test

View More


Description:

INDIVIDUAL Oil laboratory needed for tribology testing of fuel

View More


Description:

Oil Laboratory needed for bitumen analyses:
Dynamic viscosity at 60 oC EN 12596
Fraass breaking point EN 12593
Kinematic viscosity at 135 oC EN 12595

View More


Description:

LONG-TERM TESTING Company seeking leading Petroleum Laboratory for Petroleum Testing Laboratory for Gas/Petrol Stations

Requirements:

We are currently looking for a leading company

View More


Description:

Fuel Laboratory needed for Propane analysis testing, from disposable propane cylinders. (14.1 Oz.)

View More


Description:

Oil Laboratory needed for Sulfur content testing of diesel fuel

View More


Description:

Large Petroleum Company needs Oil Laboratory for Impurity Testing by Gas Chromatography - Mass SpectrophotometryGC-MS for 1 sulfur impurity in iso-octane

View More


Description:

Microbiology Laboratory needed for ASTM bacteria resistance testing on a lubricant according to ASTM E2275, Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance.

View More


Description:

Analytical chemistry laboratory needed for Flash point testing

View More


Description:

India conglomerate needs industrial hygience laboratory to conduct air & water quality testfrom 4 different places. Air samples to be collected and one water sample for testing. Please give quotation for the same.

View More


Description:

Oil Laboratory needed for lubricant testing: Quantitative Spectrophotometric Analysis QSA and RULER (Remaining Useful Life Evaluation Routine,

View More


Description:

Analytical chemistry laboratory needed for petroleum wax testing

View More


Description:

Materials laboratory needed for ASTM D7419-13 testing Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

View More


Description:

LONG-TERM TESTING ISO accredited Privately held, Third-party laboratory needed for petrochemical testing by standard test methods for 'ethanol mainly for fuel applications.

Requirements:

The lab should be ISO accredited in the petrochemical field.

View More


Description:

Materials laboratory needed for biodegradability testing to determine the biodegradation of organic solvents, Please specify costs and timeframe.

View More


Description:

Large corporation needs Physical Laboratory for Need bulk sample (~1,800-lb) jaw crushing of 12 x 6 dia. consolidated wet mix material (silica-alumina matrix) to 1/2 - 1 size.

Requirements:

Material has inherent moisture although appears like concrete on the exterior; should fracture easily through a jaw crusher; need contract lab to process material in the (Ohio) vicinity.

View More


Description:

LONG-TERM TESTING Fracking company needs analytical chemistry testing for Sodium chloride testing for purity and contaminants

Requirements:

Product testing

View More


Description:

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongatio...

Requirements:

Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongation 300 ASTM D 1000
Tear resistance >50 ASTM D1004
Adhesion to steel >2 AST...

View More


Description:

Shipping vessel owner needs Spain laboratory for bunkered fuel analysis
?Asphaltenes, Ash, Carbon Residue
?Density, Flashpoint
?Sulfur Content, Hydrogen Sulfide
?Microbes Contamination
?Pour Point, Stability
?Total Sediment Potential (TSP)
?V...

View More


Description:

Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equipment for electrical repair would need certified inspections . Our protective gear and equipment that nee...

View More


Description:

Materials laboratory needed for ASTM and Lubrizol Testing for Test cloud point of water soluble ethoxylated product. Cloud point of a liquid detergent formulation to ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

Requirements:

ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

View More


Description:

Laboratory needed for DOT Jerrican (2.2-gallon portable fuel container) Testing per Department of Transportation (DOT) ?Subpart M: Testing of Non-Bulk Packaging and Packages CFR / I / C / 178 ? Specification of Packages, Sections 178.603, 178.604, 178.605...

Requirements:

DOT Certification

View More


Description:

Oil Laboratory needed for sulphur testing in transformer oil to ASTM Test method D 1275 B, Corrosive Sulphur Test

Requirements:

ASTM Test method D 1275 B, Corrosive Sulphur Test

View More


Description:

Large petrochemical company needs laboratory for measurement of the accurate density of a molten solid. The density of a molten solid (melting point of 185C) is needed between 195C and 230C. The density at 200C is approximately 1.14 gr/cc. It is estim...

View More


Description:

USA Microbiology Laboratory needed for microbiology testing: Microbiology count and identification on a emulsion sample (metal working fluid).

Requirements:

certified

View More


Description:

Maryland certified laboratory needed for petroleum fingerprinting

Requirements:

Maryland certified lab

View More


Description:

Analytical chemistry laboratory needed for biodiesel testing. Analysis of the composition of biodiesel B5
95 % diesel
5% biodiesel

Requirements:

Analysis of the elements and characteristics that make up the fuel Biodiesel

View More


Description:

Analytical Chemistry Laboratory needed for chemical analysis to determine composition of butyl reclaimed rubber to be able to assess the registration requirements of the EU REACH Regulation.

View More


Description:

Analytical chemistry laboratory needed for USP Testing of petroleum jelly to USP method standards

View More


Description:

India NABL Laboratory needed for natural gas testing of Calibration standard gas mixtures for natural gas analysis on gas chromatographs as per NABL accredition

Requirements:

Standards are required for analysis of natural gas from C1 to C5 and C6+ and nitrogen ,carbon dioxide .

View More


Description:

India laboratory needed for lubricant oil testing

View More


Description:

Petroleum company needs NABL Accredited Laboratory for grease testing as per Indian Standards IS 507 : 1993 Grade 2 (https://law.resource.org/pub/in/bis/S11/is.507.1993.pdf) : 1. Glycerine content, percent by mass, MAX 2. Low temperature pumping properti...

View More


Description:

LONG-TERM India Laboratory needed for natural gas analysis on regular intervals as per OEM guidelines like hydrocarbons, CO2, nitrogen and contaminants in natural gas.

Requirements:




View More


Description:

Geology Laboratory needed to provide a bid for the following cor analysis : porosity and permeability analysis of 15 1x2 cores (we supply the core); two (2) of those samples will also have MICP analysis after initial P&P results; 15 thin sections from 1x2...

Requirements:

I am following up on a request to update this work request.

View More


Description:

India oil laboratory needed for testing: flash point
pour point
density
storage stability
Octane number

View More


Description:

Laboratory needed for testing ABS Rings for ASTM D5001, Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

View More


Description:

Research laboratory needed for alternative fuel testing and analysis in petrol spark ignition engine. Aternative fuels are alcohol fuels blended with petrol .

Requirements:

confidential

View More


Description:

Oil laboratory needed for ASTM testing of lube oil for ash, lead and water content to ASTM D874, E203, D5185

Requirements:

ASTM D874, Standard Test Method for Sulfated Ash from Lubricating Oils and Additives , additives, ash, lubricating oils,

ASTM E203, Standard Test Method for Water Using Volumetric Karl Fischer Titration

ASTM D5185, Standard Test Method for Multiele...

View More


Description:

Energy company needs laboratory for fuel testing. I have three samples (Light Ends, Solvent, and Industrial Diesel Fuel) that would require the tests the following tests:
? Appearance (physical state, color, etc.);
? Upper/lower flammability or explosiv...

View More


Description:

India laboratory needed for high speed diesel testing

View More


Description:

Analytical laboratory needed for wide rande hydrocarbon gas chromotagraphy to determine gas composition test on the natural gas coming from gas field for composition of the hydrocarbons right up to C16, the Gross and Net Heating Values of the gas, the M...

Requirements:

A wide range Hydrocarbon Gas Chromatograph

View More


Description:

Large engineering company needs middle eastern laboratories that can determine the effectiveness of proposed asphaltene inhibitor chemicals at specified operating conditions using well samples and other well chemicals

View More


Description:

Petroleum company needs laboratory capable of testing Jet Fuel samples to detect the presence of additives specifically Metal Deactivator Additive and Thermal Stability Improver Additive. 8 samples

View More


Description:

University Scientific Researcher needs Contract Laboratory for conducting science experiments for Research Study on comparison of synthetic oil to common crude oils. Methods for the conversion of lignites, subbituminous coals and other carbonaceous feeds...

Requirements:

The characteristics of synthetic oil are to be analyzed and compared to the common crude oil's.

View More


Description:

Contract laboratory needed for radiation test in hydrocarbon samples. Below is some information about the samples

Propane samples ,which is a liquefied petroleum gas (LPG), will be pressurized hydrocarbons gas in liquid state. The samples are in a stee...

Requirements:

NA

View More


Description:

INDIVIDUAL Oil laboratory needed to test to car engine oil for Oil quality, Oil age, approximate usage, . I would require a written statement into age of oil, how long approximately have been used, and test of quality? This is a Land Rover genuine part. ...

Requirements:

Oil quality, Oil age, approximate usage,

View More


Description:

Materials Laboratory needed that performs ASTM D6703, Standard Test Method for Automated Heithaus Titrimetry

View More


Description:

H2S compatibility test for water based mud lubricant used in oilfield. Product needs to be exposed H2S gas to see the product's reaction towards the gas.
Target is to see if the product is compatible and good to use in sour gas environment.
I am lookin...

View More


Description:

Asia company needs laboratory for microscopic testing of tube and shell type heat exchanger used in Liquified petroleum gas

View More


Description:

Natural gas company needs a test and calibration laboratory for natural gas turbine meters.size 16 inch - G4000 to test flow.

Requirements:

test flow

View More


Description:

Large oil company needs materials laboratory to perform Soil Cleaning Test by FED-STD-791 Method, 7502. Testing to be done on an isoparrafinic solvent with flash point ~ 220F.

Requirements:

Testing to be done on an isoparrafinic solvent with flash point ~ 220F.

View More


Description:

Materials Laboratory needed for Oil Flashpoint Testing to ASTM d93, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Testerflash point

Requirements:

astm d93 or similar

View More


Description:

Australia university researcher needs laboratory for DHA (Detailed Hydrocarbon Analysis) test for commercial gasoline standard knocking test in CFR engine fueled by Australia 91 gasoline. In order to interpret experimental results, we want to get detailed...

View More


Description:

URGENT: USA environmental laboratory needed for two European Union studies on compound tetrakis (hexylmethyl)phosphonium sulfate (THPS), which they registered for use for bacterial control in recirculating water handling systems for wells associated with...

Requirements:

EU Aerobic Biodegradability Study
EU N-Octanol Water Partition Coefficient Study

View More


Description:

Oil laboratory needed to test oil specifications report on the used residual oil

View More


Description:

Africa geology laboratory needed for Laboratory Testing of Non-Evacuated & Expanded Perlite (P05) Thermal conductivity, Moisture content, pH, Particle size, Density

Requirements:

Thermal conductivity, Moisture content, pH, Particle size, Density

View More


Description:

Materials laboratory needed for testing mixture of rosin, beeswax and activated charcoal heated on a open flame to determine malleability and ability to be cast into shapes at low temperatures

View More


Description:

INSURANCE Oil Laboratory needed for contamination testing from diesel testing from truckWe've submitted 2 tests to our insurance company but now they say the results have to be certified. Can y'all help?

View More


Description:

Geotechnical Laboratory needed for Laboratory Testing of Non-evacuated & Expanded Perlite (P05). Density, Moisture content, thermal conductivity, pH and Particle size

View More


Description:

USA Environmental Toxicology laboratory needed for the following OECD tests:
OECD 301B, and F, Biodegradation
OECD 202 , Daphnia sp. Acute Immobilisation Test , OECD 203,Fish, Acute Toxicity Test.

View More


Description:

Environmental Toxicology Laboratory needed for OECD Testing to,OECD 301 B, Biodegradation Testing OECD 301F and OECD 203 Fish, Acute Toxicity Test

View More


Description:

Manufacturer of chemicals used in the oil & gas field needs Middle East chemical certification laboratory for the TDS & MSDS for each product. Kindly, provide what is the cost & what is the way to start it?

View More


Description:

Materials laboratory needed for OECD biodegradability testing of aluminum complex greases to OECD 201-204, OECD 107 or 117, and OECD 301B. Please include pricing.

View More


Description:

Chenni Analytical Laboratory needed for Testing of fuel

View More


Description:

Lubricant Manufacturer needs reputable European Union Toxicology Test Laboratory for toxicity tests on our lubricant formulations includingAcute Toxicity -- dermal and inhalation. We have already identified a lab in the U.S. to testing for us in the U.S...

Requirements:

Acute Toxicity -- dermal and inhalation.

View More


Description:

Oil Laboratory needed for Sequence VIB motor oil testing
Sequence VIII

View More


Description:

LONG-TERM TESTING Laboratory needed for ASTM Fuel stability analysis (s-value) using ASTM D7157. Testing of visbreaker bottoms. Estimate two samples per month.

View More


Description:

US labs needed that test sulfur and nitrogen levels in crude oil by combustion/chemiluminesence at levels < 100 ppb.

View More


Description:

Environmental Laboratory needed for OECD biodegradability testing of water insoluble chemicals. (used in the oilfield industrythat require biodegradability analysis (OECD 301B: CO2 Evolution Test or other similar method). I would like to request a quotat...

View More


Description:

FDA Food laboratory needed for food packaging contact surface testing of high quality kerosene normal paraffines n-Paraffin C13, which is used for rolling aluminum foil. As it is generally known foil can be used for packaging food, for that reason we nee...

View More


Description:

Testing laboratory needed testing on fire arrestor caps which are used for gelled alcohol fuels and barbeque/fire lighter fluids.The objectives of this testing would be to determine the effectiveness of these fire arrestor caps in preventing flashback of...

Requirements:

Determine the safety characteristics of the closures. Stop flashback of flame.

View More


Description:

Materials laboratory needed that can test ASTM E299 on petroleum oil. The lab needs to be able to test for the lowest range 0-40ug.

Requirements:

The lab needs to be able to test for the lowest range 0-40ug.

View More


Description:

LEGAL Analytical chemistry labroatory needed to chemical analysis of oil heating fuel located in apartment house boiler for litigation purposes.

Requirements:

Establish chain of command and chemical make up of oil located in boiler for litigation purposes

View More


Description:

USA environmental laboratory needed for soil testing to determine level of contamination / toxicology resulting from long term natural gas leaks

View More


Description:

Asia environmental laboratory needed for hydrocarbon testing.Soil and groundwater sample analysis:

? Total petroleum hydrocarbons diesel-range organics;
? Total petroleum hydrocarbons gasoline-range organics;
? Volatile organic compounds; and
? Sem...

View More


Description:

ONGOING TESTING Independent Contract Lab needed for oil transformer sample testing of Electrical Transformer Oil Samples, The tests required are: Table-1: Tests & Test Frequency for Transformer Oil Analysis Sr. No. Test Transformer Type 400 kV TX 220kV TX...

View More


Description:

University Researcher needs India Oil Laboratory foroil analysis lab procedure

View More


Description:

Dubai Laboratory needed for Specification investigation

View More


Description:

Materials Laboratory needed for ASTM Testing of a single oil sample for Wear Metals and Additive Elements to ASTM D-5185, Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma A...

View More


Description:

India Metrology Laboratory needed for NIST certification Accuracy test and calibration of P.D.Flowmeter for liquids as per NIST standards

Requirements:

NIST certification is required after tests are successfully carried out. Flowmeters will be supplied with flanged end connections

View More


Description:

Oil Laboratory needed for Low velocity friction apparatus (LVFA) testing with Falex multispecimen

Requirements:

Special computer program for testing has been developed.

View More


Description:

Materials laboratory needed for propane testing for behaviors and properties of propane when pressure drops from 2000 bar to 300 bar, 80 bar, 50 bar and 3 bar within milliseconds, what the temperatures of propane would be within 0,5 milliseconds during th...

Requirements:

Maximum pressure is 2000 bar, the pressure drop must be fast and sharp, with in milliseconds from 2000 bar to relatively low pressure. The temperature measurement must be fast, respond time should be within millisecond, since the transitive moment is shor...

View More


Description:

Middle East analytical chemistry laboratory needed for glycol testing testing on 10 glycol samples. Please send me your quotation for 10 samples.

View More


Description:

Materials Laboratory needed for ASTM Lubricant Testing to ASTM D4172 four-ball wear testing analysis. Lubicate will have "friction reducing concentrate" additive designed for all lubricant-based applications were wear and fatigue is a potential problem ...

View More


Description:

Asia geotechnical laboratory needed for ASTM Borehole Drilling Core testing Cerchar Abrasivity Index (CAI)-abrasiveness for cutter wear during raise boring and drilling tools (blast holes)
? Multistage Triaxial Test in rock;
? Further UCS and point lo...

Requirements:

ASTM if possible

View More


Description:

Asia geotechnical laboratory needed for water-based drilling fluids testing (mud). Differential sticking testing for water-based drilling mud.
It will be my greatest pleasure for your response.
Thank you.

Requirements:

differential sticking values of water based drilling fluid (mud)

View More


Description:

India analytical chemistry laboratory needed for fuel additive testing to be used with petrol, diesel, LDO, furnace oil etc.

View More


Description:

PETROLEUM LABORATORY NEEDED FOR OIL CONTENT TESTING FOR PETROLEUM WAXES IN 100's OF SAMPLES

View More


Description:

India Laboratory needed for synthesis of biolubricant.

View More


Description:

Oilfield Product and Service Company needs United States Laboratory for Dimensional INspection and Surface Finish Testing

View More


Description:

Research Scholar in Geology needs India geochemical laboratory for petrochemical testing of sample of kimberlite petrographical analysis

Requirements:

.

View More


Description:

Asia laboratory needed for gas assessment after gas scrubber. The gases we need to do assessment for are:
1) MeSH
2) H2S
3)DMS
4) DMDS
5) TMA
6) NH3
7) Acetaldehyde

Requirements:

The procedures available for gas assessment and their cost individually*Confidential*

View More


Description:

Contract Laboratory needed for gasoline testing specifically the % of ethanol blended into gasoline at the retail pump. How much would analysis such as this cost me per sample?

View More


Description:

India Contract Test Laboratory needed for pipeline pigging residue testing for Fe, Fe2O3, Si, S,H2O, pH value, SRB, sulphates, carbonates for pipeline pigging residue to determine the internal corrosion of pipeline.

View More


Description:

Toxicology Laboratory needed for OECD Testing: skin irritation testing per OECD 404 (Draize)

Requirements:

Please email, do not call:\

View More


Description:

Oil Laboratory needed for Automatic Transmission Fluid (ATF) testing: oil side thermal cycle test per the below on 3 or up to 6 units (1/2" NPT connections) . An additional TOC flow loop will need to be present to allow for the TBV wax valve actuation t...

View More


Description:

USA Oil Laboratory needed for fuel additive testing of 10 organic components added together to form a fuel additive. We need to verify the components are in the sample we provide and within the ranges specified.

Requirements:

Methods will be based on the individual components ( list and ranges to be provided ). Most likely GC.

View More


Description:

India Testing facility needed for corrosion testing. Analysis of Fe, Fe2O3, Si, S,H2O, pH value, SRB, sulphates, carbonates for pipeline pigging residue to determine the internal corrosion of pipeline.

View More


Description:

USA Laboratory needed to Measure water content/dew point of a compressed hydrogen cylinder to Compressed Gas Association commodity spec for hydrogen 6th edition CGA G-5.3 2011.

Requirements:

ConfidentialCompressed Gas Association commodity spec for hydrogen 6th edition CGA G-5.3 2011.

View More


Description:

Engineering firm needs analytical chemistry labroatory for kerosens analysis: analyse aromatic and Paraffin content of Kerosene

View More


Description:

India Test Laboratory needed for Biodiesel testing to IS 15607 standard

View More


Description:

Materials laboratory needed for wax testing: congealing points of waxes for method qualification

Requirements:

confidential

View More


Description:

Middle East Laboratory needed for H2O or/and H2S testing

View More


Description:

Petroleum Company needs Qatar Environmental Laboratory needed for Stack emission testing from an existing incinerator

Requirements:

Sample and measure dioxin and furan concentrations

View More


Description:

Shipping company needs Asia Oil Laboratory for ASTM Testing of oil for the sulphur level

Requirements:

ASTM

View More


Description:

USA Laboratory needed for iso-octane analysis of a few ground water samples in compliance with Washington State Department of Ecology, no certifications needed.

Requirements:

Comply with Washington Department of Ecology requirements as applicable.Confidential.

View More


Description:

Large Oil Company needs Oil Laboratory for OECD Testing of Grease for Biodegradability under method CEC L-33-A-934 and Bioaccumulation by method OECD 117, OECD Guidelines for the Testing of Chemicals, Section 1 / Test No. 117: Partition Coefficient (n-oct...

View More


Description:

USA oil laboratory needed for ASTM Testing for diesel fuel testing for cetane number to ASTM D613 Cetane number

View More


Description:

USA Oil laboratory needed for fuel analysis on a new fuel additive that a group of three of us are developing with completing a sds or tds along with EPA certification testing. . Can you also include a very general price on how much something like this wi...

View More


Description:

Physical Laboratory needed for surface roughness testing on 40 parts. Tested on the cylindrical body and chamfeer on the part. I would prefer the testing to be done non-contact and results in the Ra and Rz mode.

View More


Description:

Materials Laboratory needed for petrochemical analysis: Wax Appearance Temperature in Crude Oil by Cross Polar Microscopy (CPM)

View More


Description:

Oil Laboratory needed for Research and Development and Product Performance Testing for Oil & Gas cross-linker performance testing. Viscosity testing at temperatures between 250 and 400 degrees F.

Requirements:

All testing, company, and contact information will need to remain confidential. We will need to maintain ownership and right to final test data. This will need to be done under an NDA.

View More


Description:

Oil Laboratory neeed for comparative research study for Oil contamination related testing. We are using one rubber gasket which remains in contact with oil. So whatever leaching out from rubber gasket in oil we want to do test for that. You may test it as...

View More


Description:

Great Britain, Holland and Netherlands Oil Laboratory needed capable to do any or all of those tests, please let me know time and pricing for each test.

API gravity D5002, D2598, D4052, D1298;
- Asphaltene D6560, IP-143;
- Flash point (closed cu...

View More


Description:

Oil Laboratory needed for ASTM Testing for Paraffin, Asphaltene, API etc.

Requirements:

ASTM

View More


Description:

USA Materials Laboratory needed for petrochemical testing: Petrochemical physical properity testing for True Vapor Pressure to ASTM D4953, D2879, D 5191

Requirements:

ASTM D4953, D2879, D 5191

View More


Description:

India Environmental laboratory needed for OECD BIO-DEGRADABILITY testing as per OECD guidelines.

Requirements:

OECD

View More


Description:

Texas Lab needed for tribology testing for testing of a bulk oil tank that contains Rotella 15w-30 motor oil. Sample was pulled and there is a foreign substance in the oil.

Requirements:

Confidential at this time

View More


Description:

Analytical Chemistry Laboratory needed for API 7A1 Torque Testing for Thread Sealant

View More


Description:

Large Oil Company needs Oil Laboratory for FT-IR measurements. I was wondering what the costs and time schedule would be for those measurements. We are talking about epoxy and silicone samples of small dimensions ( 2 mm ) or even adjustable on location. ...

View More


Description:

India Oil Laboratory needed for ASTM naphtha testing:

Sl No Parameters Unit

1 Specific gravity @ 150C

2 Paraffins %Wt

3 Olefins %Wt

4 Naphthenes %Wt

5 Aromatics %Wt

ASTM D86 Distillation

Initial Boiling Point 0C

6

ASTM D86 Di...

Requirements:

ASTM

View More


Description:

LONG-TERM: Northern California Laboratory needed to analyse lubrication oil on regular basis during ba trial period. The oil is used on a commercial centrifuge drive.

View More


Description:

Research Institute Professor needs middle east analytical chemistry laboratory for roc testing: x-ray fluorescence, ICP, instrumental neutron activation analysis

View More


Description:

Turkey analytical chemistry laboratory needed for hydrocarbon testing. Producing liquid and gaseous hydrocarbons and fertilizers from biomass. Need analytical support services.

View More


Description:

Sedimentary and petroleum geology university researcher needs south africa geology laboratory for Cathodoluminescence petrology testing of carbonate rocks to study diagenetic evolution of hydrocarbon reservoirs and aquifers, and to understand the controls...

Requirements:

Cathodoluminescence petrology of carbonate rocks.

View More


Description:

Oil Laboratory needed for motor oil analysis per the list below. Ø Determination of flash point. Ø Determination of kinematic viscosity and dynamic viscosity. Ø Calculation of viscosity index. Ø Determination of pour point. Ø Determination of phosphorus ...

View More


Description:

Large oil company needs USA environmental toxicology laboratory for marine acute toxicity testing. Need drilling fluid components tested to comply with Indonesian regulations. Desired species is juvenile Penaeus monodon (tiger prawn). We have found an I...

Requirements:

DJMConfidential

View More


Description:

Saudia Arabia analytical chemistry laboratory eeded for ASTM Testing: analyzing dimethyl disulfide for its purity as per any ASTM method.

Requirements:

Purity of Dimethyl Disulfide and other sulfur impurities present

View More


Description:

Oil Researcher needs ISO India analytical chemistry laboratory for steel slab and biogas testing with use of a GC-TCD and X-ray Diffractometer. A column configuration coupled to GC-TCD is also a part of the requirements. The objective is to analyse the m...

Requirements:

ISO testing requirement needed. I also wish that my contact information and company name remains confidential.

View More


Description:

Asia chemistry laboratory needed for hydrocarbon testing

View More


Description:

Oil Laboratory needed for diesel contamination testing to determine if diesel is contaminated

Requirements:

Connfidential

View More


Description:

University Researcher needs United States laboratory for ASTM Testing: Crude oil classification for rail transportation in the USA Up to ten samples of crude oil.

I would like to test a few crude oil samples for their boiling point distribution/initia...

Requirements:

ASTM

View More


Description:

Texas Laboratory needed for Crude Oil tests for Gravity, Sulfur and Organic Chlorides

View More


Description:

Europe laboratory needed for oil testing to calculate value of (i) FFA ? Free Fatty Acid(ii) Phosphorous(iii) Moisture and insoluble properties

Requirements:

We need to calculate value of (i) FFA ? Free Fatty Acid(ii) Phosphorous(iii) Moisture and insoluble propertiesI would like my company to remain confidentian.

View More


Description:

Michigan Laboratory needed for Railcar Sampling and ASTM Testing samples from 3 railcars a day and perform the following tests: Must have ASTM 666-7-10 and need ASTM 2163 (or something similar) which tests olefins, aromatics and benzene in NGLs. This will...

View More


Description:

India Oil Laboratory needed for oilfirend testing

View More


Description:

India analytical chemistry laboratory needed for Lubricant testing

View More


Description:

India Analytical Chemistry Laboratory needed for Petroleum testing

View More


Description:

FLorida Analytical Chemistry Laboratory needed for chemical testing. Chemicals to Treat for Citrus Canker and Greening. Studies need to done in a replicated fashion and results analyzed statistically

View More


Description:

India Oil Laboratory needed oil testing and solid fuel testing , Flash point , Fire point , Cloud point , Distillation range Pour point, Viscosity, Density, Sulphur content, Carbon residue, pH , acid number, moisture content, GPC analysis, TG with MS an...

View More


Description:

Canada Laboratory needed for natural gas analysis of gas from 10 wells. Simply identifying the chemical composition of natural gas from gas wells in northern British Columbia."

Requirements:

Analysis of gas from 10 wells

View More


Description:

Asia university researcher needs materials laboratory for asphalt testing for determining the wax content of asphalt or other petroleum products.

View More


Description:

Oil and petroleum laboratory with the following testing capabilities: The unit examines and analysis the petroleum products as following:- Engine Oils Auto Transport Oils Hydraulic Oils Gear Oils Industrial oils Gasoline Brake fluid Cooling water The most...

View More


Description:

Geology laboratory needed for bentonite testing. we are looking for a laboratory to know its qualty, especially if it can be a source for drilling fluid.

View More


Description:

Oil laboratory needed for ASTM Testing.Quotes on Fuel testing: ASTM D6890 (Cetane) Oil: CLP - CLOUD POINT - ASTM D97 COPOF - VISUAL TEST OIL AND FUEL - CEP PP - DENSITY OF GLYCOL - ASTM D1298 FSP - SPECTRO FOR FUEL - ASTM D5185 KF - KARL FICHER WATER TEST...

View More


Description:

Biochemistry Laboratory needed for "green testing" with gas analyzer that would determine the methane content and heating value of our gas. We are working on our thesis. It is about the biogas from water hyacinth and fish rumen. we would like to know if t...

View More


Description:

USA Environmental chemistry Laboratory needed for gas chromatography testing. Gas analysis of gas samples that we need to analyze for SF6 and CH4. The concentrations are around 50 ppt (SF6) or ppm (CH4) but can be as low as 5-10. Please suggest labs to c...

Requirements:

These analyses are usually done on a GC.

View More


Description:

India Materials Laboratory needed for bio-diesel testing in four ball wear testing machine.

View More


Description:

Philippines analytical chemistry laboratory needed for petroleum testing to determine wax content of petroleum products.

View More


Description:

USA or Canada Materials Laboratory needed for ASTM Testing to ASTM D3712, Analysis of oil soluble sodium petroleum sulfonate by HPLC. Currently need three samples tested.

View More


Description:

Midwest Analytical Chemistry Laboratory needed for methane gas testing: complete methane gas analysis of methane applications and the clients are looking for a lab to get the methane tested. Need locations in the above states.

Requirements:

complete methane gas analysis for burner design of atmospheric burners

View More


Description:

Microbiology Laboratory needed for hydrocarbon testing: microbial analysis in my samples (bacterial cultures) enriched with petroleum to see the alkanes and the polycyclic aromatic hydrocarbons. 1) Do you have any extraction protocol for the alkanes an...

View More


Description:

Middle East geotechnical laboratory needed for oil recovery studies. inner diameter of slim-tube used in enhanced oil recovery study of the AMAL B reservoir ,

View More


Description:

East Coast USA Materials Laboratory needed for ASTM petrochemical sampling and analysis of several petrochemicals. petrochemical solvents in the boiling range of 250 to 450 deg F (D86) ASTM D4367 and/or D6229 We seek to determine the benzene content of a ...

Requirements:

View More


Description:

URGENT: Petroleum Company urgently needs accredited laboratory to perform ASTM bitumen sample testing according to the below method: ASTM D1189. certified lab ASAP.

View More


Description:

Analytical Laboratory needed for petrochemical testing. We need proficency testing or laboratory comparison on processing oil or rubber extruder oil.
Testing parameters :
Group compostion according ASTM D 2007 Content of PCA according IP 346

View More


Description:

Russia Laboratory needed for Standards measurement of liquid flow in petrochemical and chemical

View More


Description:

Large Advanced Technology Company needs materials laboratory for Falex Four Ball Wear Test (ASTM D-4172) and Pin and Vee Block Test (ASTM D5620) and corrosion Test for Lubricants.

View More


Description:

India Contract Laboratory needed for gas testing

View More


Description:

Asia Contract laboratory needed for oil analysis: crude oil assays for the validity of our end-product. We will only verify sufficient properties of our end-product if it is valid to use as a crude oil. we would like to know if how much end-product we wi...

View More


Description:

Analytical Chemistry Laboratory needed for ASHREA Testing: floc point as per test method ASHREA 86, Methods of Testing the Floc Point of Refrigeration-Grade Oils . Please let us know the charges

Requirements:

ASHREA 86

View More


Description:

Essential Oil Manufacturer that is manufacturing oil shipping cartons needs Transportation certification UN laboratory needed for UN certification testing: dangerous goods transportation testing for the certificate for SS containers intended to carry dang...

View More


Description:

India Materials Laboratory needed for petrochemical testing product grease and oil

View More


Description:

Mechanical Laboratory needed for gas consumption testing: Test the efficiency of a Gas burner by measuring the Gas consumption.The test setup has to be done according to the Test standard.

Requirements:

The data provided below needs to be CONFIDENTIAL.

View More


Description:

India Oil Laboratory needed for ASTM Testing of cutting oil

Requirements:

ASTM

View More


Description:

India analytical chemistry laboratory needed for fuel testing for fuel addictive

View More


Description:

US Materials laboratory needed for ASTM Testing of Natural Gas: Chemical composition analysis of natural gas used as a vehicle fuel for adherence to SAE J1616 Testing per, ASTM D 1142-90, ASTM D 1945-91, ASTM D 3588-91, ASTM D 4084-88, ASTM D 1945, ASTM D...

Requirements:

Testing per, ASTM D 1142-90, ASTM D 1945-91, ASTM D 3588-91, ASTM D 4084-88, ASTM D 1945, ASTM D 2650, ASTM D 4084

View More


Description:

Analytical chemistry laboratory needed for freeze point testing on the following samples. - MEA, caustic soda , denatured ethanol, blend - MEA thiazine, methanol blend varying %'s As well I was wondering if you could test for chlorides and iron in 45% cau...

View More


Description:

India materials laboratory needed for ASMT Testing: Freezing point determination for glycol based coolant- 4 samples

Requirements:

ASTM

View More


Description:

Analytical Chemistry laboratory needed for synthetic lubricant testing. A contract laboratory that will run a pH test and not just the TAN/TBN tests on synthetic lubricant...but NOT Analysts Inc.

Requirements:

We are looking for a lab that will run a pH test and not just the TAN/TBN tests on synthetic lubricant....but NOT Analysts Inc.

View More


Description:

Forensic Analytical Chemistry Laboratory needed for gasoline testing from gas tank tested to see what other ingredients ( I.E.Sugar,Sand,etc ) may or may not be present in the gasoline.

View More


Description:

Oil Laboratory needed for two tests: ASTM Testing of Unsulfonated Residue of Petroleum Plant Spray Oils (ASTM D483). The second is a Sequence II foam test (ASTM D892), modified to use propane gas instead of air.

View More


Description:

Asia laboratory needed seawater immersion testing corrosion tests for various materials (resins and metals) and for composite modules of offshore locations

Requirements:

none, please precise

View More


Description:

Materials Laboratory needed for ASTM testing to ASTM D 3704, Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

View More


Description:

Analytical Chemistry Laboratory needed for Petroleum Testing: Gas Chromatography GC analysis of petroleum for PAHs (polycyclic aromatic hydrocarbons) in petroleum.

View More


Description:

Materials Laboratory needed for ASTM Testing to ASTM 3539 Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer run on 4 White Mineral Oil samples and to be measured against Butylacetae as stated in the method. All can be shipped with no s...

Requirements:

ASTM 3539 Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer Confidential

View More


Description:

Middle East Oil Laboratory needed for oil testing via mobile laboratory of the company up to us via one of the import and export companies

View More


Description:

Canada mechanical laboratory needed for Mechanical life testing: Gearbox oil testing to test the life of the gearbox.

View More


Description:

Materials Laboratory needed for BS / IEC Testing: electrical breakdown strength test in accordance with British Standards Specification: BS 5874, Method for determination of the electric strength of insulating oils to investigate how the electrical breakd...

View More


Description:

India oil laboratory needed for propane testing. Quantification of propane in gas testing.

View More


Description:

Materials Laboratory needed for ASTM Testing and FPT Testing: Lab testing for specialized shipping of Oil

Requirements:

ASTM & FPT

View More


Description:

Germany geology laboratory needed for sand testing. Test coarse garnet sand fine garnet sand anthracite

View More


Description:

Oil Laboratory needed for ASTM Testing of Oil

Requirements:

ASTM.keep it confidential

View More


Description:

Materials Laboratory needed for ASTM Testing to astm D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

View More


Description:

Colorado analytical chemistry laboratory needed for natural gas testing: Natural Gas Analysis by GC from a contract laboratory located in central or southern colorado. A local laboratory is needed to ensure prompt sample turnaround time!

View More


Description:

United States Analytical Chemistry Laboratory needed for hydrocarbon testing: total chlorine in a hydrocarbon matrix in the ppm range of 0 - 20. Chlorine is present as both organic can inorganic. Ongoing requirement of 5 -10 samples per month

View More


Description:

Europe analytical chemistry laboratory needed for crude oil testing to do analyses to determine electric conductivity and dielectric constant of crude oil
in the frequency range of 20Hz to 100kHz and temperature 20 to 60°C.
We are interested on evalua...

Requirements:

Please I wish my contact information and company to remain Confidential.

View More


Description:

US Environmental Laboratory needed for biodegradeability testing of mineral oil to Coordinating European Council (CEC) Standard CEC-L-33-A-94,

Requirements:

CEC-L-33-A-94

View More


Description:

MIDDLE EAST COMPUTER LABORATORY NEEDED FOR
PETROLEUM & GAS REFINING SIMULATOR TESTING OF SOFTWARE

DESCRIPTION:-
DYNAMIC REAL-TIME PROCESS SIMULATOR.THE TRAINING OF THE SOFTWARE ARE PROVIDE SKILLS FOR TRAINEES TO MANIPULATE ALL OPERATIONAL MALFUN...

View More


Description:

South Africa Oil Laboratory needed for kerosene testing: 1. Cetane number testing of Kerosene which are 5-6 samples with different quantities of cetane improver and Diesel Lubricity Improver.

2. Cetane number testing of 2 samples of diesel oil

Requirements:

No particular specification.

View More


Description:

Oil Laboratory needed for crude oil testing for salt content of crude oil

View More


Description:

Materials Laboratory needed for ASTM Testing. Oil Testing to ASTM D2896 - 11 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration 10 samples or less

Requirements:

ASTM D2896 Total Base Number

View More


Description:

Analytical Chemistry laboratory needed for oil testing. TOCOTRIENOL Testing in oil. Please specify the price, detection limit and methodology, and how I will send the sample (preserver or not) thanks.

View More


Description:

Canada materials laboratory needed for ASTM Testing, Lubricating grease Testing to ASTM D1264, ASTM D1264 - Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greaseswashout

Requirements:

ASTM D1264 - Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greaseswashout

View More


Description:

Analytical Chemistry Laboratory needed for lubricating oil testing for the amount of gum content.using the instrument your using to get the gum content of the gasoline. this is part of our thesis at batangas state university.

View More


Description:

Materials Laboratory needed for ASTM Testing to ASTM D3230-10 Salts in Crude Oil (Electrometric method). Standard test for salts in crude oil (electrometric method. 4-10 Tests a week.

Requirements:

ASTM

View More


Description:

Oil Refinery needs Product Safety Toxicology Laboratory for product safety testing for better hazard information. We are interested in testing some products for skin irritation. Would your company be able to provide this service? And if so, what would the...

View More


Description:

Asia Oil Laboratory needed for oil testing to measure some parameters for an oil sample that was produced during a process.

View More


Description:

Africa Materials Laboratory eeded for mechanical tribology testing on all the mining equipment machineries oil sampling at a progressive level.

View More


Description:

India Materials Laboratory needed for oil testing: Testing Mineral insulating oil for its Electrostatic charging tendency.

View More


Description:

Energy company needs analytical chemistry laboratory for natural gas analysis: Analyze natural gas sample for Total chlorine by combustion ion chromatography, Method ASTM 7359 with results 0.05 mg/m cubed. Also need to have this sample tested for mercury...

View More


Description:

Environmental analytical chemistry laboratory needed for shallow effluent water testing PSMT Samples particularly the below parameters: 1) pH 2) Color, PCU 3) Oil and Grease, mg/L 4) Total Suspended Solids, mg/L 5) Surfactant, mg/L 6) Phenols, mg/L . Plea...

View More


Description:

Oil Laboratory needed for propane testing. Development of gas solubility data for propane, methane, and ammonia gases in various oils at various temperatures and pressures up to 16-20 bar.

Requirements:

The ability to develop gas solubility data for propane, methane, and ammonia in various oils at a wide range of temperatures and pressures up to 16-20bar.

View More


Description:

Environmental Toxicology Laboratory needed for Chronic ecotoxicity testing on petroleum refinery effluent

View More


Description:

Petroleum Laboratory needed for ASTM Testing: Petrochemical Testing of Lubricant oil 1- Kinematic Viscosity at -51 oC (ASTM D 2533)2- Dynamic Foaming (FED-STD- 791 method 3214)3-Deposit Test (WDAC) - (FED-STD- 791 method 5003)4- Lead corrosion (g/m2) (FED...

Requirements:

1- Kinematic Viscosity at -51 oC (ASTM D 2533)2- Dynamic Foaming (FED-STD- 791 method 3214)3-Deposit Test (WDAC) - (FED-STD- 791 method 5003)4- Lead corrosion (g/m2) (FED-STD- 791 method 5321)5- Corrosion test at 232oC (Silver and bronze) - ((FED-STD- 791...

View More


Description:

USA Materials Laboratory for diesel testing for metal composition of soot and ash that is the byproduct of a diesel particulate filter machine. More specifically, i want to see if there is any platinum in the soot and ash.

View More


Description:

USA Oil Laboratory needed for processed bitumn testing: BS&W test API GRAVITY /VISCOSITY Testing

Requirements:

BS&W test API GRAVITY /VISCOSITY require immediately,pending location,will hand carry.

View More


Description:

Europe analytical chemistry laboratory needed for gas chromatography testing.
liquid chromotography

View More


Description:

Analytical Chemistry Laboratory needed for hydrocarbon testing: quantification of dissolved H2S in our liquid hydrocarbon products.

Requirements:

We will collect necessary samples and send them to an analytical lab for testing.

View More


Description:

Oil analytical chemistry Laboratory needed for fuel oil testing. Sulfur testing of surplus of "old" #2 fuel oil, that is used primarily as an emergency backup fuel for sulfur content complies with the NYS limit of <15 ppm sulfur (6 NYCRR Subpart 225-1). T...

View More


Description:

Texas analytical chemistry laboratory needed for deformulation testing to deformulate a product

Requirements:

formula company remain confidential.

View More


Description:

India Oil Laboratory needed for analyse the oil fraction extracted from coal. We want to study the what percentage fraction of various range of hydrocarbons available in the liquid. Also the C,H,N,S analysis.

(one sample)

View More


Description:

USA Materials Laboratory needed for ASTM Testing of API base oil analysis ASTM D-287, ASTM D-445, ASTM D-2161, ASTM D-2270, ASTM D-5293, ASTM D-97, ASTM D-92, ASTM D-4294, ASTM D5800, ASTM D-974, ASTM D-7419

Requirements:

ASTM

View More


Description:

India Oil Laboratory needed for ASTM Testing of sodium petroleum sulphonate to ASTM standards"

Requirements:

ASTM

View More


Description:

Midwest USA Analytical Chemistry Laboratory needed for API Testing, ASTM Testing Hydrocarbon analysis: hydrocarbon, fats, oil and grease, biosolids MIU, FFA, TFA, Fatty acid profile, sludge analysis, minerals, heavy metals

Requirements:

API, ASTM

View More


Description:

Oil Laboratory needed for diesel testing to check the purity of diesel.

View More


Description:

Oil Laboratory needed for oil testing oil waste and recycling it. We wont to do some test, which say to us wha our mixture consider includes Cas numbers. Is it possible?

View More


Description:

Oil Laboratories needed for CPM or DSCP to supply us Crude Oil Samples that have Wax Appearance Temperature (WAT) data either by CPM or DSC. The samples will be used for verification purposes for a new automatic analyzer that can test WAT of crude oils i...

Requirements:

CPM or DSCPlease keep my contact information confidential.

View More


Description:

Oil Laboratory needed for turbine oil testing water content - viscosity - colour - ph-values - content of metal

View More


Description:

Oil Laboratory needed for ASTM Testing to ASTM D7112, Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer 10 samples

Requirements:

ASTM D7112

View More


Description:

Africa Analytical Chemistry Mobile Laboratory needed for Testing Petroleum Fuels

View More


Description:

USA AOCS ISO Oil Laboratory needed for ASTM Testing Hydroperoxide testing in diesel and biodiesel fuels to ASTM D6447, ASTM D3703, or AOCS/ISO equivalent

Requirements:

ASTM D6447, ASTM D3703, or AOCS/ISO equivalent

View More


Description:

Southern California oil laboratory needed for ASTM Testing to ASTM Test Method D 5453-93 to ensure diesel fuel meets the 15 ppm standard.

View More


Description:

India analytical chemistry laboratory needed for hydrocarbon testing for butanol. No of samples - 1
Sample Description - Hydrocarbon solvent.
Test Type - Kauri Butanol Value

View More


Description:

USA Oil Laboratory needed for crude oil testing of one crude oil sample for Wax Appearance Temperature (WAT), also known as cloud point. ASTM D2500 does not work for this crude because it is not transparent. The best test method is Differential Scanning...

Requirements:

Differential Scanning Calorimetry

View More


Description:

South Africa materials laboratory needed for ASTM Testing and ISO Testing of oil & gas (specifically diesel fuel)to Anti-Corrosion to ASTM 0665
Anti-Foam to ASTM 0892
Lubricity to ASTM 06079
Electrical Conductivity of distillate fuels to ASTM 02624
Fi...

Requirements:

ASTM & ISO

View More


Description:

Oil Laboratory needed for oil testing. Test a crude oil sample for vapor pressure and vapor molecular weight.

View More


Description:

Dubai or Africa Petroleum Laboratories needed for crude oil analysis tests for crude oil, gas and produced water.

View More


Description:

USA Oil Materials Laboratory needed for ASTM Testing to ASTM method: D2786, Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass
10 samples

Requirements:

ASTM 2786Company name and information to remain confidential

View More


Description:

USA Oil Laboratory needed for ASTM Viscosity testing and ASTM pour point testing for failure for gear oil in Greenland at temperatures in the -40 to -54 deg. F range. We have two samples from the field and one sample from our factory. Would like to hav...

Requirements:

Pour Point: ASTM D97Viscosity: ADTM D445

View More


Description:

International mining company producing aggregates for the construction needs oil laboratory for scheduled oil sampling (SOS)of our crushing and screening Equipment.

View More


Description:

Fuel Laboratory needed for fuel testing of new product line with our customer base.Biodiesel 9000 testing and ASTM Testing: Fuel Quality Test, Fuel Ecomony Testing, Emissions Testing We are looking for a company that can develop a testing protocol, and i...

Requirements:

BioDiesel9000 and ASTM

View More


Description:

India Laboratory needed for oil testing: NASH testing method for testing of lubrication oil testing for turbine

Requirements:

Yes confidential

View More


Description:

Africa Materials Laboratory needed for ASTM Testing of waste fuels to the following ASTM Methods:
High Heat Value (Btu/lb) ASTM - D2015
(now referred to as ASTM - D5865)
Moisture (Loss of Drying) ASTM - D3173 @ 105o C
Moisture (Loss of Drying) ASTM - ...

Requirements:

ASTM

View More


Description:

Africa Oil Laboratory needed for Oil Testing: Dielectric constant and strenght test for oil

View More


Description:

California Metallurgical Laboratory needed for particulate testing from Diesel Particulate Filter cleaning machine that extracts soot and ash. We would like to know if our test samples contain any precious metals.

View More


Description:

USA Oil Laboratory needed for petroleum testing nad heavy metals testing. Need to determine if heavy metals (mercury, lead, cadmium) and/or petroleum compounds are present in a sample.

View More


Description:

India Automotive Mechanical Laboratory needed for enginer testing to determin high octane content value for ENGINE TESTING. SO WE NEED CHENNAI HIGH OCTANE CHECKING LAP

View More


Description:

South Africa Environmental Laboratory needed for oil testing. Analyzing of PCBs in oil samples -10 samples

Requirements:

PCBsNeed my contact details to remain confidential

View More


Description:

Africa Oil Laboratory needed for Analysis of petroleum product(oil, gas and diesel)
Samples
Oil =5
Gas =6
Diesel =6

Requirements:

Demain confidential

View More


Description:

Africa Environmental Laboratory needed for enviornmental testing: soil analysis of a region of oil producing

Requirements:

Confidential

View More


Description:

Europe Materials, Environmental Toxicology laboratory needed for grease testing of 2 products for the following tests: Property prEN 16028 clause ref. Test Standard Value to be achieved Toxicity / water pollution A1.24 OECD 105 Water solubility <10?g/lit...

View More


Description:

Canada physical laboratory needed for smoke point testing to determine the smoke point for oil blends

Requirements:

Please keep my contact information and company to remain confidential

View More


Description:

USA Oil Laboratory needed for ASTM Testing, Octane testing to ASTM D2700, Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

Requirements:

ASTM D2700

View More


Description:

South Africa Geology Laboratory needed for Geochemical analysis

View More


Description:

Materials Laboratory needed for ASTM Testing: Glove permability testing to ASTM F739-07, Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

View More


Description:

Large Oil Company needs ISO Materials Laboratory for ASTM Testing of a ball bearing grease by ASTM D1478, Standard Test Method for Low-Temperature Torque of Ball Bearing Grease.

Requirements:

ISO

View More


Description:

India materials laboratory needed for materials testing to measure thermal conductivity, specific heat and density of paraffin wax and stearic acid.

View More


Description:

India biotechnology laboratory needed for research and development testing: biodiesel testing and biodiesel blend testing for ongoing research and biodiesel quality monitoring.

View More


Description:

Canada analytical chemistry laboratory needed for contaminant testing of organic hydraulic oil tested for methamphetamines.

View More


Description:

USA materials laboratory needed for particle analsyis testing of particles in a paraffinic fuel for particle size (coulter counter/ Horiba, other)Particle size analysis of solids in a non-water liquid

Requirements:

Particle size analysis of solids in a non-water liquid

View More


Description:

Large Oil Company needs UK or Europe physical chemistry laboratory for particle analysis. particle counting of solid particles in solution, size range below 1um. Around 20 samples to be analyzed.

View More


Description:

India Petroleum Laboratory needed for Biofuel Testing biofuel sample for its Free and Total Glycerin ASTM D6584 or EN 14105/6. Please give information regarding the testing charge, payment mode and the address to which the sample has to be sent. Kindly co...

Requirements:

ASTM D6584 or EN 14105/6

View More


Description:

Saudi Arabia Oil Laboratory needed for oil testing

View More


Description:

Australia or USA mechanical laboratory needed for API Testing testing of thread compounds rotary shouldered connections to american petroleum institute api 7a1 test of thread compound

Requirements:

test needs to meet api 7a1test apparatus shown on api booklet recommended practice for testing of thread compounds rotary shouldered connections.

View More


Description:

Canada mechanical laboratory needed for IGAC (interprovincial gas advisory counsel Testing to IGAC Portocol 09-17. Test auto propane regulators and injectors.

Requirements:

Testing need to achieve protocol 09-17 as per the IGAC (interprovincial gas advisory counsel). We need the testing to insure it meets this standard. I wish the company to remain confidential

View More


Description:

Oil Laboratory needed for oil testing

View More


Description:

Eastern Europe Analytical Chemsitry Labroatory needed for ISO Testing: FUEL FILTERS - WATER SEPERATION TESTaccording to ISO4020."

View More


Description:

Africa Geochemical Laboratory needed for petroleum testing: source rock quality, maturity

Requirements:

Please keep contact information and company to be confidential

View More


Description:

India Geochemistry Laboratory needed for geochemical characterization testing of oil seep

View More


Description:

Africa ISO environmental laboratory needed for ASTM Testing. Analysis of total petroleum hydrocarbons and polycylic aromatic hydrocarbons from soil contaminated by waste engine oil

Requirements:

ISO and ASTM Confidential

View More


Description:

Oil Laboratory needed for BTU testing on biofuels such as wood or non petroleum oils

View More


Description:

Middle East electrical laboratory needed or emi testing

address: dammam ,saudi arabia

View More


Description:

Middle East analytical chemistry , radiochemistry ARAMCO laboratory needed for radioactivity testingfor presence of radioactive materials (NORM) in Black Powder sample (a waste resulted from gas filtration).
if you have the facility to do so please call...

Requirements:

ARAMCO accepted - recognized laboratory.

View More


Description:

Florida or Eastern USA Oil and Petroleum Laboratory needed for ASTM Fuel Testing: 1. Determine the amount of sulfur in diesel fuel samples.
2. Determine the chemical composition of a precipitant (resulting from treating diesel fuel with a chemical addi...

Requirements:

ASTM D975-09bPlease apply CONFIDENTIAL status to contact information and company name

View More


Description:

Texas Materials Laboratory needed for ASTM Testing to ASTM E 681: Lower explosive limit and Upper explosive limit of base motor oil

Requirements:

ASTM E 681

View More


Description:

India analytical chemistry laboratory needed for Request for bio-diesel testing: oxidation stability value (testing) for bio-diesel

View More


Description:

India oil and petroleum research laboratory needed for IP Testing or ASTM Testing: Octane Testing for octane number (RON) and Motor octane number (MON) for gasoline samples.

Requirements:

IP or ASTM method

View More


Description:

Materials Laboratory needed for Oil Drilling Analysis: ASTM Petroleum Testing to ASTM, USEPA, UOP and OECD Methods: Flash Point ASTM method D-9074 or ASTM D-93.
Sulfur ASTM D-5453.
Content Poliaromatic Hydrocarbons(PAH)) USEPA method 8270 C.
Total Aro...

Requirements:

ASTM methodsUSEPA methodsUOP methodsOECD methodsYes I want to be a confidential process.

View More


Description:

Materials Laboratory needed for BioDegradability Testing BioDegradability %. CEC-L-33-A-94 performed on multipul sequential samples that are soy bean oil based.

Requirements:

CEC-L-33-A-94

View More


Description:

Geochemical Laboratory needed for geochemical analysis of core samples Vitrinite relfectance
TOC
Tmax
Pyrolysis

View More


Description:

USA analytical chemistry laboratory needed for Sepaaration of strong emulsions using tubular centrifuge. strong oil in water emulsion that need to be separated for evaluation of properties each of the constituent.

Requirements:

No

View More


Description:

New Zealand Analytical Chemistry Laboratory needed for Detailed Hydrocarbon Analysis Testing (DHA) Testing & Characterisation of crude oils test GCMS or TLC/FID
Quantification of changes in major component groups of oils over time.

View More


Description:

Mississippi analytical chemistry laboratory needed for hydraulic fluid testing for percentage of particulate content and water percentage content.

Requirements:

Do not need confidentiality, would need certification paperwork for tests.

View More


Description:

Large Oil Company needs analytical chemistry laboratory for base oil testing. (mineral oil) tested for 21 CFR 178.3620 (c). Please specify approximate cost? Also the amount of sample you need and how fast you can do it. Greatly appreciate your assistance....

View More


Description:

ISO Alabama oil analytical chemistry laboratory needed for octane levels testing , petroleum testing, ethanol levels testing

Requirements:

ISO Confidential

View More


Description:

India analytical chemistry laboratory needed for crude oil testing

View More


Description:

Europe oil laboratory needed or FE8 testing on lubricants (oil)

Requirements:

FE8

View More


Description:

Pakistan Mechanical Laboratory needed for ASTM Testing of oil to ASTM D4291 or other Standard Test Method for Trace Ethylene Glycol in Used Engine OilWe require testing of used lube oil sample of a gas engine to analyse presence of coolant(glycol) or its ...

Requirements:

ASTM D4291 or similar

View More


Description:

Analytical Chemistry laboratory needed for natural gas testing of natural gas samples for arsenic levels.

View More


Description:

Asia geochemistry laboratory needed for geochemical testing: 1.Headspace/Occluded/Adsorbed gas composition analysis using gaschromatography
2.Total carbon and total organic carbon analysis
3.Solvent extraction
4.Extract analysis using gaschromatograph...

Requirements:

-

View More


Description:

USA or Canada Oil Physical Materials Laboratory needed for crude oil testing the wax appearance temperature (WAT) of 20 crude oil samples using Cross polarization microscopy (CPM) method

Requirements:

Cross polarization microscopy.Please keep my contact and company information confidential

View More


Description:

Oil and Gas Pipe coating manufacturer needs Brazil materials laboratory for coating testing to apply OHTC determination in samples of steel pipes coated with multy layers of Syntactic Polypropylene.

View More


Description:

India Oil Laboratory needed for ASTM and IP testing for Sodium and Calcium petroleum sulphonates as per ASTM / IP methods

View More


Description:

UK analytical chemistry laboratory needed for gas Analysis of synthesis gas for iron carbonyl x 5 samples.

Requirements:

Please keep confidential.

View More


Description:

Oil Laboratory needed for independent testing of gasoline samples.

View More


Description:

Europe oil laboratory needed for ASTM Testing /diesel testing to ASTMD 2879 vapor pressure measurement for three diesel fuel samples.

Requirements:

Confidential

View More


Description:

laboratoire de chimie analytique de la France requis pour essai d'efficacité de filtration Mesure du seuil de filtration sur des filtres en bronze fritté destinés à filtrer de l'oxygène.

View More


Description:

India EPA Analytical Chemistry Laboratory needed fuel testing for sulfur concentration in liquid fuels. we have known sulfur concentration samples and after extraction with ionic liquids we want to find out final concentration...

Requirements:

EPA

View More


Description:

Oil Laboratory needed for chemical testing for unwanted chemicals in oil production process with pore volume injected at core scale for heavy oil production target of 60,000 bopd by 2015-16. The heavy oil group has decided to produce this oil by applicati...

View More


Description:

Canada analytical chemistry laboratory needed for hydrocarbon testing, GC-MS testing of a mixture of gaseous and volatile hydrocarbons and oxygenates. goal: identify components. number of samples: 1 to 5

Requirements:

please contact and company information confidential

View More


Description:

Utah oil laboratory needed for Bromine number testing on crude oil

Requirements:

Please keep my and my company info confidential

View More


Description:

ISO Packaging Laboratory needed for ISO, ASTM or DIN Testing for presence of gear oil in a plastic packaging material specifically, High Density Polyethylene (HDPE) film and its effect or wholesomeness on Cocoa liquor after packaging

Requirements:

ISO or ASTM or DIN. Contact information and company to remain confidencial.

View More


Description:

Materials Laboratory needed for Hydrocarbon Testing. Residual BTU content on an adsorption media following use in hydrocarbon service. In order to evaluate methods to recover the media by burning off residual hydrocarbons, the client also needs to know th...

View More


Description:

Oil Physical Laboratory needed for used cooking oil testing 1) Auto-ignition temp. 2) flash point Who can do this, (preferably close to Denver) and what's the cost?

View More


Description:

Geology Laboratory needed for ROCK EVAL PYROLYSIS about 60 samples from cuttings (Basics - TOC; S1 S2; VR)

View More


Description:

USA analytical chemistry laboratory needed for Aniline point testing on various fluids (diesel, oil based mud, etc.)

View More


Description:

USA Oil and Petroleum Laboratory needed for ASTM Testing to ASTM E299 ASTM methods. The 12 samples will be oil and radioactive (low level):
1.1.1.1 Acid #/Neutralization # per ASTM D-964. Acceptable is less than 0.01 mg KOH/g.
Circle one: Acceptable...

Requirements:

ASTM D-964, ASTM D-1744, ASTM E299,KEEP CONTACT INFO CONFIDENTIAL.

View More


Description:

India analytical chemistry laboratory needed for ASTM Testing of kerosene sample checked for Flash Point as per ASTM D 93-2011 & Viscosity as per ASTM D445-2011.

Requirements:

ASTM D93-2001 FOR FLASH POINTASTM D445-2011 FOR VISCOSITY

View More


Description:

Central USA Geochemical Laboratory needed for Geochemical testing for Subsurface hydrocarbons Initially to test the validity of using as an exploration tool the sample count would be approximately 100.

Requirements:

All informnation is to remain confidential

View More


Description:

US analytical chemistry laboratory needed for ASTM Testing to ASTM D3539 effective evaporation rate of Diesel

Requirements:

ASTM D3539

View More


Description:

UKAS, ISO Middle East Environmental Laboratory needed for ASTM Testing: permeability test for water issue for disi project

Requirements:

UKAS, ISO, ASTM

View More


Description:

USA TRIBIOLOGY LABORATORY NEEDED FOR BIODEGRADATION TESTING OF LUBRICATING OIL (INSOLUBLE IN WATER), TESTING FOR READY BIODEGRADATION.

Requirements:

STANDARD METHOD OECD 301 B (CO2 EVOLUTION).CONFIDENTIAL.

View More


Description:

Large Oil Company needs UK OECD GLP analytical chemistry laboratory for hydrocarbon testing for octanol water partiton (Kow) coefficient by OECD 117 (HPLC estimation). One sample

Requirements:

OECD GLP

View More


Description:

UK microbiology laboratory needed for bio accumulation tests

View More


Description:

California Oil Laboratory needed for Kinematic viscosity testing and density testing of several produce fluid samples (mix of heavy oil and water). I would like the viscosity of the total fluid, not just the oil.

View More


Description:

EUROPE ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR IATROSCAN TLC-FID FOR SARA HYDROCARBON CLASS QUANTIFICATION on vgo sample

View More


Description:

Asia ISO Materials Laboratory needed for ASTM Testing and ISO Testing of oil

Requirements:

gmp.astm.isoyes that should remain confidential

View More


Description:

Large Oil Company needs India materials Laboratory for ASTM Testing, CHN Testing as per ASTM D5291/10 Nitrogen content for additives

Requirements:

ASTM D5291/10

View More


Description:

Asia, UK or USA Materials Laboratory needed for Artificial Aging Testing high temperature like GFC test at 160 in step 48, 96,144 192 hrs Each step: viscosity, TBN/TAN, Oxidation & Nitration

Requirements:

Any acceptable international test method

View More


Description:

Oil testing labarotory needed for transformer oil testing and other petroleum oil testing Flash Point, PMCC, °C
:

View More


Description:

USA Oil Laboratory needed for oil testing for average effective dynamic viscosity of a water, heavy oil, production fluid at ~212degF

View More


Description:

Asia Oil Laboratory needed for hydrocarbon testing: (i) Hydrocarbon gas dew-point measurement (ii) hydrocarbon gas GC analysis to C14

View More


Description:

Northern California Oil Laboratory needed for ASTM Testing for quality of fuel recovered from automobiles and trucks prior to crushing and scrapping. What I need is an analysis of the recovered fuel and a comparison of the results to applicable Californi...

Requirements:

ASTMI wish my contact information and company to remain Confidential.

View More


Description:

Materials Laboratory needed for guar gum analysis, testing for viscosity, hydration rate, particle size, pH level, moisture content

View More


Description:

Materials Laboratory needed for oil analysis of refined petrolem oil. need know class and grade-light crude, sulfur, density,flash point,kinectic voscosity,pour point,specific gravity,etc.....

Requirements:

confidential

View More


Description:

Physical mechanical laboratory need for Cold fuel pressure drop testing to maintain fuel heating performance
Return flow type heater + Filter ASSY:
Supply pump (Flow control
Temperature control fuel heater
Flow rate adjusting valve
Fuel supply tank...

Requirements:

CONFIDENTIAL

View More


Description:

Oil Shipping firm needs Oil and Petroleum Laboratory needed for oil analysis of oil on 20 vessels

View More


Description:

USA Materials Laboratory needed for ASTM Conformity Testing to BIODIESEL (B100) - ASTM 6751-11a.
continuos testing or batches need consult.

View More


Description:

Saudi Arabia Transportation Laboratory Testing needed for oil analysis used in vessels.

View More


Description:

Canada Analytical Chemistry Laboratory needed for BS EN 858 -1 Oil & Water mix Analysis.

Requirements:

dealing with oil water mix; and need to analyze few water samples containing used automobile oil. The main concern is the quantity of oil present in the samples.There will be about 30 + 10 samples of 250-500ml of water.I am wondering if you can analyze th...

View More


Description:

Biomedical company needs materials laboratory for AATCC Testing to AATCC TM 118 and 193 demonstrate oil repellency ratings of eight for both methods. Show a repellency (contact angle >90º and time to absorption of >20 minutes of 10 µL droplets) to tributy...

View More


Description:

Analytical Chemistry Labroatory needed or ccs testing and brookfield viscosity testing

View More


Description:

Europe analytical chemistry laboratory needed for ASTM Testing: Vapor Pressure testing of Oil

Requirements:

ASTM

View More


Description:

USA EPA R&D laboratory needed for fuel testing for evaluation of Ultra Low Sulfur Diesel (ULSD) fuel processed after a long-term storage by Alfa device. We expect that 1 -Quality and 2 - Power of processed ULSD fuel will be increased, 3- Level of contamin...

Requirements:

EPA, Confidential

View More


Description:

Texas Geology laboratory needed for Core Flood testing for Matrix Acidizing Core samples to be tested to make an informed decision on the optimal choice of acid system for matrix stimulation of formation damaged offshore Dolphin wells. Solubility tests,...

Requirements:

Core labs are available and can be sent to the lab. PLEASE KEEP CONTACT AND COMPANY INFORMATION CONFIDENTIAL

View More


Description:

India materials laboratory needed for ASTM Testing for interfacial tension between crude oil and water needs to be determined."

Requirements:

ASTM

View More


Description:

United Arab Emirates analytical chemistry laboratory needed for amine testing of HEAT STABLE SALTS in Amine sample.frequency ones per month

View More


Description:

Materials Laboratory needed for Sodium Petroleum Sulfonate Testing to Test Method Standard Specification Minimum Maximum Petsol-40 1 SP. Gravity @ 29.5 Deg. C Internal 0.98 1.02 2 Colour ASTM Dilution ASTM 1500 4.5 6 3 Sodium Sulphonate % IP 144/ 81 60 65...

View More


Description:

Southeast North America Materials Laboratory needed for ASTM Testing to ASTM D 5001

View More


Description:

India materials laboratory needed for ASTM Testing for Full Sodium Petroleum sulphonate ASTM D3712 - 05(2011) D SPS tests , with Cast Iron corrosion IP 125 and Corrosion in Sn 150 oil

View More


Description:

Africa UKAS analytical chemistry laboratory needed for Quantitative Analysis for the Concentration of PCBs in Transformer Oil

Requirements:

UKAS. No need for confidentality

View More


Description:

Oil analytical chemistry laboratory needed for chemical analysis of Lubrication oil sample

View More


Description:

USA analytical chemistry laboratory needed for heats of combustion testing of liquid petroleum samples

View More


Description:

Oil Laboratory needed for research and development evaluation of Refused Derive fuel. In the Process of a Project Evaluation with this new fuel, we have to do the due diligence for the fuel as well as the technology. This fuel is generated from waste and ...

View More


Description:

Oil Refinery needs Middle East petroleum laboratory for oil analysis of heat stable salts in Amine sample,bu any method

Requirements:

yes

View More


Description:

Metropolitan analytical chemistry laboratory needed for natural gas testing to ASTM or GPA for natural gas component analysis natural gas component analysis C1 thru C6+ including ,CO2,nitrogen & oxygen.
Also, sulfur testing on natural gas such as hydrog...

Requirements:

ASTM or GPA methods for analysis of natural gas components by gas chromatography.

View More


Description:

Forensic Analytical Chemistry Laboratory needed for mercaptan and chemical compound testing on Sample of Gas and Liquid -
Mercaptan levels and chemical compounds of each

Requirements:

CONFIDENTIAL!Standards to meet State and local standards for odorizing product (Propane)Need a cost for said test and can you ship me the test containers so we can fill them?

View More


Description:

Fuel Laboratory needed for fuel Testing of distillate fraction as per MPCB Norms.For burning these fractions by mixing these with Furnace Oil. The fractions are 3,5 Xylenol high boiles.(solids below 60 Deg. C) Low boilesrs Clear liquid,Boiling Pt. 140 Deg...

View More


Description:

USA EPA Toxicology Laboratory needed for EPA Toxicology Testing for Oil related chemicals.

Requirements:

EPA

View More


Description:

Large Oil company needs Materials Laboratory needed for lubricity testing in three different additive to determine how much the can reduce the friction between the metal to metal or metal to formation surfaces.

View More


Description:

USA analytical chemistry laboratory needed for engine oil analysis for content of silozanes with MDL. GC-MS analysis acceptable, other methods after consideration.

Requirements:

Analyze engine oil for content of siloxanes with MDL of 1ppm.

View More


Description:

Europe Materials Laboratory needed for ASTM Testing of white oil on ASTM methods all parametres

Requirements:

ASTM

View More


Description:

Multinational Corp needs Germany, UK, Canada or USA materials laboratory for API and ASTM Testing for pipeline material for the Diversion Gas Pipeline is 16" diameter API 5L grade X60 carbon steel with an internal 3mm layer of type 316L clad. The longitud...

Requirements:

Material Specs are per API and ASTM.Please maintain confidentiality of contact information.

View More


Description:

Oil tribology Laboratory needed for oil analysis done on the hydraulic oil from our injection mold machines. Whats the pricing and turnaround time?

View More


Description:

India product safety laboratory needed for certification testing of gas safe product e

View More


Description:

India Oil and Petroleum laboratory needed for Furnace oil testing.

View More


Description:

Analytical Laboratory needed for Chemical & Physical propertiestesting & use comparision between, Crude based Furnace oil & Tyre Pyrolysis furnace oil.

View More


Description:

US Oil and Petroleum Laboratory needed for hydrocarbon analysis, gasoline test in the range from C1 to C32 to obtain component distribution in a sample without identification of particular isomers.

View More


Description:

Mechanical Laboratory needed for Fuel catalyst testing

View More


Description:

Middle East Materials Laboratory needed for Lubricants Analysis Test Turnbine Oil Test
FTIR
Water Content
Particle Count

View More


Description:

USA R&D Laboratory needed for ASTM / NACE Testing of developmental products using dynamic tube blocking apparatus, commonly referred to as PMAC.

Requirements:

ASTM/NACEConfidential contact information and company please.

View More


Description:

Southern USA Oil and Petroleum Laboratory needed for SAE Testing, on road or on track testing to SAE J1321 specs.
Device to be tested go to
www.supertech.it

Requirements:

SAE J1321 specifications

View More


Description:

Canada EPA environmental laboratory needed for EPA Testing for Gravity, Sulfur, RVP etc. Complete battery of tests required by U.S. A's EPA.

Requirements:

EPA

View More


Description:

Analytical chemistry laboratory needed for nitrogen gas testing of Nitrogen produced through cryogenic method. Testing for complete composition and chemical analysis of the gas we are getting out of it in PPM level.

View More


Description:

Large Oil Company needs Europe oil and petroleum laboratory for ISO 5165 cetane testing of gasoil sample, tested for cetane number according to EN 5165

Requirements:

ISO 5165

View More


Description:

St Louis analytical chemistry labroatory needed for ASTM Testing, Gas Testing for Sulfur compounds in gas to ASTM D5504-8

Requirements:

ASTM D5504-8

View More


Description:

Canada materials laboratory needed for lubricant testing: Dielectric Strength testing in spray can. One sample.

Requirements:

Please keep our contact information confidential

View More


Description:

USA Analytical Chemistry Laboratory needed for crude oil analysis to determine the minimum miscibility pressure of a crude oil sample with CO2.

Requirements:

none

View More


Description:

India Oil Laboratory needed for Chlorine Testing of PCB Transformer Oil of PCB oil filtered with an activated charcoal(granual) 2) PCB oil is filtered with sodium 3)without filtered PCB oil.

View More


Description:

Analytical Chemistry Laboratory needed for liquid LPG gas testing. PROCESS STREAM ANALYSIS FOR RBI WORKSHOP VERIFICATION FOR UNIT 15 &70. SAMPLE SOURCE/TYPE 7001 F HC 7002 SHELL INLET(HC) 7000F LIQUID OUTLET(HC) 1503 LPG OUTLET (GAS) 1507 F SPENT CAUSTIC ...

View More


Description:

United Arab Emirates analytical chemistry laboratory needed for ASTM, IP, UOP LIQUID HYDROCARBON TESTING FOR:
1)NITRIGEN
2)CHLORIDE
3)H2S
4)NH3
5)HYDROGEN-H2
6)AMINE.

LPG OUTLET(GAS),
TEST REQUIRED
1)HYDROGEN SULPHIDE(H2S) & CAUSTIC.

SPENT C...

Requirements:

STANDARD METHOD, LIKE ASTM,IP,UOP ETC

View More


Description:

Analytical chemistry needed for hydrocarbon testing: 1. Crude oil naphthenate screening-test 2ea
2. Crude oil sodium emulsion screening-test 2ea
3. Apparent dynamic viscosity vs temperature per shear rate ( dead crude)-test 10ea
4. Apparent dynamic vis...

View More