Contract Laboratory has received the following valves and valving systems Laboratory Requests which need to be fulfilled! These valves and valving systems Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their valves and valving systems Laboratory and Scientific Research. If you need a valves and valving systems Laboratory, please Submit a valves and valving systems Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
ASTM Shipping Container Performance Testing
Packaging Laboratory needed for ASTM packaging transportation testing for medical product which comply to ASTM D4169 Standard Practice for Performanc... View More
Laboratory Instrument Calibration
LONG-TERM Large Aerospace Company needs contractor for performing recurring calibration of pressure gauges, pressure transducers, pressure relief valv... View More
ISO and IEC Dental Equipment Testing
Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More
Large Industrial Manufacturing Company needs Laboratory for SAE Air Dryer Testing to SAE J2384 Air Dryer Test Procedure, This Standard defines the Tes... View More
Electrical Laboratory needed for modular wiring products tested and certificated to BS8488 Prefabricated wiring systems intended for permanent connect... View More
Initial Quoto perform UL 1069 Standard for Hospital Signaling and Nurse Call Equipment and UL 2560 Standard for Emergency Call Systems for Assisted Li... View More
DIN PVC Gutter Systems Testing
Large Construction Materials Manufacturer needs Industrial Laboratory for DIN testing of plastic polyvinyl chloride PVC gutter systems to DIN EN 607 E... View More
ASTM Thermal Insulation Testing
URGENT SASO Materials Laboratory needed for ASTM testing of thermal insulation panel to ASTM E2430 Standard Specification for Expanded Polystyrene (E... View More
ISO Polyvinyl Chloride uPVC Piping Testing
Accredited Laboratory needed for ISO testing of uPVC pipes as per ISO 1452-2:2009 standard Plastics piping systems for water supply and for buried and... View More
Air Purification Company needs Industry Laboratory for ASHRAE H2S removal efficiency to ASHRAE 145.2 Laboratory Test Method for Assessing the Performa... View More
Petroleum Laboratory Equipment
Petroleum Laboratory needs Laboratory Supplier to provide a quote for the following equipment for their laboratory.
LIST OF REQUIRED EQUIPMENTS
S/... View More
Tests according ISO 12944-1:2018-06 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective... View More
ASHRAE Air Cleaning Performance
Third-Party Laboratory needed for ASHRAE testing of carbon filter 400x340x25mm to be tested with TBD standard challenge gases. ASHRAE 145.2 Laboratory... View More
ASHRAE Air Cleaning System Testing
Large Consumer Products Company needs USA Third-Party Laboratory for ASHRAE Testing to the following ASHRAE Standards:
ANSI/ASHRAE Standard 145.2-20... View More
ANSI Personal Fall Arrest System Testing
Large Corporation needs Performance Laboratory for ANSI Safety Testing to ANSI/ASSE Z359 American National Standard Safety Requirements for Personal ... View More
Materials Laboratory needed for ASTM testing of insulation to ASTM E2430 Standard Specification For Expanded Polystyrene (?EPS?) Thermal Insulation Bo... View More
Environmental Laboratory needed for hydrogen sulphide removal capacity of impregnated granular media to ASHRAE 145.1 Laboratory Test Method for Assess... View More
Constant Acceleration Testing of Weather Antenna
Large Corporation needed for ISO constant acceleration testing commercial systems weather radar antenna assembly at a functional air transport level. ... View More
NSF / ANSI Water Purifier and Filtration
Laboratory needed for NSF / ANSI testing of water purifier and filter according to
NSF/ANSI 177 standard Shower filtration systems Aesthetic effects... View More
Transportation Container Conditioning and Environmental Simulation Study
Packaging Laboratory needed for transportation study and ASTM conditioning and environmental simulation testing of shipping containers and boxes to cl... View More
Industrial Laboratory needed for ASTM fire resisting duct work testing to ASTM E2336-16 Standard Test Methods for Fire Resistive Grease Duct Enclosure... View More
Third-Party Laboratory needed for UL testing of Photovoltaic panels to UL2703 Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devi... View More
Packaging Laboratory needed for performance testing of packaging to ASTM Testing D4169 Standard Practice for Performance Testing of Shipping Container... View More
Automotive Laboratory needed for SAE performance testing for fuel systems with Nylon air and fuel vapour lines to SAE J2045 Performance Requirements f... View More
Third-Party Laboratory needed for ASHRAE testing of carbon grid block/ honeycomb filter 594x594x95mm to be tested with toluene, H2S and SO2. ASHRAE 14... View More
Large Corporation needs Performance Laboratory for ASHARE testing of an air cleaning device to ASHARE 145.2 Laboratory Test Method for Assessing the P... View More
Automotive Laboratory needed for SAE life cycle testing of plastic fuel line connectors for the automotive industry according to SAE J2044 Quick Conne... View More
Electrical laboratory needed for SAE charge accumulation and dissipation testing according to SAE J1645, Fuel Systems and Components - Electrostatic C... View More
Acoustics proficiency tests for accreditation
ISO 17025 Materials Laboratory needed acoustics proficiency testing to the following ISO Standards:
(1) ISO 354 Measurement of sound absorption in ... View More
IEC Compliance of Medical Electrical Equipment
Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More
ASTM and ASME Architectural Natural Stone Testing
Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the... View More
Industrial Laboratory needed for metallic value pressure testing to BS EN 12266-1:2012, P11(Annex A.3) and P12 (Annex A.4), Industrial valves. Testing... View More
Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More
LONG-TERM TESTING Mechanical Laboratory needed for Burst testing for 6 models of valves for ABS certification to verify design wall thickness at 4,200... View More
Electrical Certification Laboratory needed for electrical certification testing of various telecommunication devices
including BT/Wi-Fi Transmitter... View More
Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seatin... View More
Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems ... View More
Electrical Laboratory needed for fir safety of electrical radiant heating systems and its ability to start a fire when installed in domestic or Comme... View More
Large Manufacturer need Automotive Laboratory for FMVSS Testing of Step Van to FMVSS 124.Accelerator Control Systems View More
Electrical laboratory needed for SAE charge accumulation and dissipation testing for rubber hose with flowing fuel substitute fluid according to SAE16... View More
Large corporation needs food laboratory needed with a certified sensory expert to run ASTM comparison study on two developmental food packaging system... View More
Automotive laboratory needed for a chemical compatibility verification procedure to ASHRAE 97 standard, Sealed Glass Tube Method to Test the Chemical ... View More
Laboratory needed for ANSI testing a pilot and thermocouple assembly to ensure that it meets ANSI Z21.77 for Piezo-Electric Spark Ignitors and ANSI Z2... View More
Large consumer products company needs laboratory for ASHRAE compliance testing to ASHRAE 145.2-2011, Laboratory Test Method for Assessing the Performa... View More
Construction laboratory needed for ASTM testing of floor covering system using radiant heat energy source to 2 ASTM standards
ASTM E 648, Standard... View More
Oil laboratory needed for refrigerant systems compressor oil analysis of four mechanical HVAC compressors. View More
Electrical laboratory needed for BS testing of railway cable insulator to BS EN 62621:2016+A1, Railway applications. Fixed installations. Electric tra... View More
Electrical laboratory needed for IEC testing of ladder cable tray under IEC to EN 61537:2001 Cable tray systems and cable ladder systems for cable man... View More
NABL Electrical laboratory needed for IEC electrical continuity testing as per IEC 61537 cable management - cable tray systems and cable ladder system... View More
NABL electrical laboratory needed for IEC testing of cable tray as per IEC 61537 Standard: Cable Management - Cable Tray Systems and Cable Ladder Sys... View More
Laboratory needed for SAE stability testing of fluorescent dyes as per SAE J2297, Ultraviolet Leak Detection: Stability and Compatibility Criteria of ... View More
Automotive laboratory needed for SAE functional and validation testing of automotive quick couplings as per SAE J2044 , Quick Connect Coupling Specifi... View More
Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials f... View More
Electrical laboratory needed for cable testing as per IEC 61537, Cable management - Cable tray systems and cable ladder systems
View More
URGENT TESTING Laboratory needed for corrosion testing of metals to ISO 6509 on faucet shanks. ISO 6509-2:2017 specifies assessment criteria and provi... View More
Construction materials laboratory needed for plastIcs testing for identification of additives in plastic pipes
View More
Large company needs materials laboratory for identification testing of powder coating used in lining for valves. We believe that it is polypropylene b... View More
Automotive laboratory needed for a brake fluid stroking test according to FMVSS n116 para. 6.13 on 2 complete disc brake systems and 2 complete drum b... View More
Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:
1. ... View More
Materials laboratory needed for corrosion testing of a chemical on boiler systems. View More
Mechanical/material laboratory needed for testing the durability and leak proofing of valves on perfume bottles. View More
Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product t... View More
ISO 17025 laboratory needed for electrical safety testing to Polyvinyl Chloride PVC skirting/Dado Trunking according to BS EN 50085Cable trunking syst... View More
Large aerospace company needs laboratory for SAE fuel system testing to 3 SAE Standards: SAE J2260, Non-metallic Fuel System Tubing with One or More L... View More
Electrical laboratory needed for protoype testing: potable water testing of energy consumption and water delta, flow rates and energy of volts, amps... View More
Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measur... View More
Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 sta... View More
Electrical certification laboratory needed for FCC conformance testing on transportation systems. Please provide quote View More
Analytical Chemistry Laboratory needed for Formulation of a novel insect repellent based on combination of esential oils for use in spray systems View More
Europe company needs microbiology laboratory for EN norm Efficacy testing of algaecide for application to water systems, such as swimming pools & spa... View More
Medical Technology Laboratory needed for biomechanical testing of dental implants to ISO14801 - compression to failure and fatigue testing of dental i... View More
ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More
Materials laboratory needed for #ASTM Testing to ASTM D3539 and ASTM D1331 for 31 liquid coating systems. View More
Medical Device Company needs laboratory to provide quote for testing of DEHP, Latex and Phthalates on catheter. Catheter is composed from various mat... View More
Physical Laboratory needed for NFPA fire rating testing of metallic cable trays ( hot dip galvanized) in conformity to NFPA 130. Fixed Guideway Tran... View More
Europe accredited laboratory needed with accreditation for the scope of the test method in accordance with
- EN 13500 - Thermal insulation produc... View More
URGENT: USA environmental laboratory needed for two European Union studies on compound tetrakis (hexylmethyl)phosphonium sulfate (THPS), which they r... View More
ON-SITE Oman Contract Laboratory needed for valves and check valves inspection and now we retesting valves as per UL Standard 262 and 312 total qu... View More
Testing laboratory able to perform: Resistance to frictions of pipes and protective sleeves of automotive fuel systems View More
Contract Lab needed for valve testing for Leakage; Hydrostatic Strength; Maximum Flow Shut-off; Strength(bending moment, turning effort, impact); Cont... View More
Packaging Laboratory needed for ASTM Testing to ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems View More
USA laboratory needed for SAE Testing of Compressed air dryer to SAE specification J2384, desiccant Air Dryers used in vehicles with compressed air sy... View More
ON-GOING: Automotive Laboratory needed for SAE Testing to SAE J2384 on Desiccant Air dryers used in vehicles. SAE J2384 is a test procedures for desic... View More
Mechanical Laboratories needed for ANSI Testing: Zero turn rotary blade lawn mower safety testing to ANSI/OPIE B71.10-2013, Off-Road Ground-Supported ... View More
Physical Laboratory needed for ISO kink testing per ISO 13868, Telecommunications and information exchange between systems -- Private Integrated Servi... View More
THird-Party Southern USA laboratory needed for longevity and reliability testing of fracturing pumps and components, in comparison with the correspond... View More
UK Genomics Laboratory needed to develop an RNA extraction method/kit for use with blood samples our existing PCR based Biomarker assay. Experience in... View More
European manufacturer needs Florida or USA Physical Laboratory for ANSI Testing: System testing to the US Market. Their systems are describe below:
1... View More
Microbiology laboratory needed for biofilm testing to identify composition of the substrate. Company is formulating a product for plumbing systems and... View More
Electrical certification laboratory needed for Electrical certification testing to EU standards for electrical security systems to standards EN50131-1... View More
Large chemical company needs materials laboratory capable of performing BS EN 1062-6 Paints and varnishes. Coating materials and coating systems for e... View More
India Materials lab needed for international level of Filter mask testing to provide the best quality of filter mask to Indian citizen in any case. W... View More
Materials laboratory needed to test UPVC fittings for ISO 1452-2 Plastics piping systems for water supply and for buried and above-ground drainage and... View More
USDA USA Food lab needed for USDA finely textured pork testing (recovered from advanced meat recovery systems) for the presence of spinal cord or Glia... View More
Asia Biomedical Laboratory needed for Accelerated aging testing for medical implants to ASTM F1980,Standard Guide for Accelerated Aging of Sterile Bar... View More
Need to Source a Mainland Europe or Par East Lab to perform retention testing in accordance with ISO 7864:1993, Sterile hypodermic needles for single ... View More
USA or Mexico technical laboratory needed for MIL Standard, NFPA, ASTM leak detector testing. Needs to perform laboratory tests for leak detectors
... View More
Electrical laboratory needed for re-designing existing power supply modules (dual power supply,. Triple power supply ,SSR) of air-born systems. We nee... View More
India electrical laboratory needed for IEC Testing Cable tray/ladder system as per International Electrotechnical Commission IEC 61537, Cable manageme... View More
Large Oil Compay needs Materials Laboratory for ANSI / SF Testing 4 samples
Water filtration sump to be tested per the ANSI/NSF 42-2000 standard. Sec... View More
Middle East Laboratory needed for ASTM Testing or ISO Testing: 5# samples. a/c systems air outlets( grilles, diffusers & dampers) View More
Environmental Simulation Laboratory needed for marine environmental testing: IEC Testing to IEC 60945, Maritime navigation and radiocommunication
equ... View More
India FDA GMP preclinical laboratory needed for preclinical studies. Ex-Vivo Study (Macrophage uptake studies , MTT and apoptosis assay for cytotoxici... View More
Manufacturer of UPVC roofing sheets needs materials laboratory for ASTM Testing to ASTM D4434/D4434M-11 ?Standard Specification for Poly(Vinyl Chlorid... View More
ISTA Packaging Laboratory needed for International Safe Transit Association ISTA testing on the small packaging which is ISTA-3A, Pacaged - Products f... View More
Electrical Laboratory needed for IEC Testing according to International Electrotechnical Commission iec 61537 Cable management - Cable tray systems an... View More
NY construction laboratory needed for air quality testing, mechanical systems testing, plumbing testing, life safety systems testing, building interco... View More
Thailand electrical laboratory needed for IEC testing, CABLE TRAY SYSTEMS. AND CABLE LADDER SYSTEMS View More
Pacific Northwest Mechanical Laboratory needed for OSHA Testing, L&I Testing, WISHA Testing, ANSI Testing: Fall Prevention Drop Tests G-Corp. would li... View More
California FDA GLP Bioanalytical Laboratory needed for FDA Tissue Testing with Hemo FAXS Tissue FAXS systems View More
India Mechanical Laboratory needed for API Testing for Certifying valve per API RP591, User Acceptance of Refinery Valves View More
Physical Chemistry Laboratory needed for ANSI and ASTM Particle Size Distribution Testing to detect size, shape and distribution.Cementatious products... View More
USA Consumer Products Laboratory needed for wood Classroom desk furniture testing to GSA standards ANSI/BIFMA 5.5,5.6,and 5.9, Panel Systems, Task Ch... View More
India mechanical laboratory needed for aerospace testing: Hydraulic System (Aircraft landing gear actuation systems)
HYDRAULIC SYSTEM: (Landing Gear ... View More
Pharmaceutical Contract Research Organization CRO experienced in expression and refolding of recombinant proteins. We have expressed our fusion protei... View More
USA Biomaterials Laboratory needed for ASTM Testing to ASTM D1894 Coefficient of Friction Coated Biliary and urethral stents/delivery systems View More
Microbiology labroatory needed for microbial testing in 15 HVAC system for bacterial and fungus testing in HVAC system with outbreak of influenza usin... View More
Nuclear Certification Laboratory needed for IEC Testing to IEC standards (60861, 60768, 60761 and 60951) of radiation monitoring systems. These system... View More
ISO Ireland mechanical laboratory needed for ISO compliance testing to ISO 8536, check valves (non return plastic valves ) to show compliance to ISO 8... View More
Manufacturer of Smoke Control Ventilators and Systems in China (Shanghai) needs Asia Certification Laboratory for EN Testing and DIN Testing to EN1210... View More
Texas Geology laboratory needed for Core Flood testing for Matrix Acidizing Core samples to be tested to make an informed decision on the optimal cho... View More
India Physical Laboratory needed for Fugitive emission testing as pet method 21 of Apendix A of 40cfr60 for Ball valves View More
Europe, North America mechanical laboratory needed for Power supply testing, measurement and power bus simulation for testing powertrain/propulsion, e... View More
Electrical Laboratory needed for NFC Testing of suspension assembly and dead end assembly for Test as per NFC33-041.NFC33-040 standard Insulated Cabl... View More
Physical Laboratory needed to test per GM GMW3155
"Thermal Cycling Test for Life Assessment of Powertrain Sealing Systems". (Sealing test for an engi... View More
NE USA Physical Laboratory needed for ASME Hydrostatic burst test to ASME Section VIII, Div. 1, UG-101, of multiple aluminum valves, flanges, and pipe... View More
Electrical Laboratory needed for testing our Cable Management Systems(cable trays, ladders,channels) in accordance to IEC 61537 Stanadard certified. View More
Korea Medical Device Manufacturer needs FDA GMP Microbiology Laboratory to perform efficacy evaluation disinfection study for FDA approval. Every BGM... View More
USA Non-GLP Histology Laboratory needed for stent testing:
48 coronary stents to be embedded in SPURR, 6 sections per stent, stained with H&E and ela... View More
Asia microbiology laboratory needed for microbial efficacy testing of water systems for ability to reduce bacterial infection when used to wash sweetc... View More
ASTM/SAE Automotives Laboratory needed for the following testing:
-Thermal Conductivity ( ASTM C518, ASTM C177).
-Floor Heat Insulation (Interior a... View More
SAE/ASTM Automotive Materials Laboratory needed for testing automobile interior carpet parts. They are body trim (textile), tailgate trim (textile), f... View More
FDA Laboratory needed for testing of indirect patient contact components in medical devices. Would like recommendations on testing components that co... View More
USA ANSI Laboratory needed for testing of finished products for compliance with ANSI/ASSE A10.32-2004:
Fall Protection Systems View More
New Zealand based manufacturing company needs Australia/New Zealand Microbiology Laboratory who can test the vapour phase activity of their product a... View More
Environmenmental Toxicology Laboratory needed for toxicity testing on a solution used in waste water systems. Please provide testing details and prici... View More
Asia ISO 9001 or ISO17025 Physical Laboratory needed for ISO 5011 Filter Testing
Air Filter
ISO 5011 Life, Eff and Restriction
Fuel Filter
S... View More
Central Florida Materials Laboratory needed for Magnetic particle inspection testing of aircraft braking systems components. View More
USA Physical Laboratory needed for leakage testing to detect extremely slow leakage, if any, from a 12oz aluminum 1800psi cylinder of argon gas closed... View More
FAA Laboratory needed for testing Lighting Systems on Cargo Compartments of Aircraft To Ensure Conformance with Federal Aviation Regulations. View More
Preclinical Contract Research Organization needed for IC50 evaluations of anti-HIV and anti-HCV drugsUsing PBMC for anti-HIV determinations and replic... View More
US Physical Laboratory needed for testing for ANSI IEC 61537 certification for steel cable trays, cable ladders, and channel support systems. View More
USA Preclinical Contract Research Organization needed for preclinical study with Electrodes and brain drug delivery systems /implants with feedback co... View More
USA Microscopy and Imaging Laboratory needed for XR-based (including mammography), MRI, PET, CT, Ultrasound imaging scans. No interpretation of result... View More
Analytical Chemistry Laboratory needed for identification testing of powder used in Earthing systems for cathodic protection. This powder is mainly ce... View More
Electrical Laboratory required for testing slurry valves - Iron Ore in an actual mining / real life environment. We have difficult time corelation va... View More
USA NCCLS/CLSI EP6-A Preclinical Contract Research Organization needed to collect venous blood samples from 1-2 donors, spike with glucose (up to 600 ... View More
USA/Europe/Asia NSF P231 Microbiology laboratory required for testing of NSF P231 (micro-organisms, virus and cyst). Device to be tested: Hollow-fiber... View More
FDA 510(k) Preclinical Contract Research Organization required for:
Medical Device Design and Modelling of Systems
Medical Device Compliance Testin... View More
New Jersey Analytical Chemistry Laboratory required for HPLC assay for finished cosmetic products for contract manufacturer in New Jersey. Report qua... View More
EN-50131-1 Electrical Laboratory needed that is authorized and capable of performing CENELEC testing, and granting certification in the fiels of EMC, ... View More
Mechanical/Engineering Laboratory required for Life/Reliability Testing. I'm looking for assistance in developing and performing a life test for a hyd... View More
USA Preclinical Contract Research Organization requried for performing a small study to document isotherms in vivo for two cryosurgical systems using ... View More
Eastcoast/Midwest USA Clinical Cardiac Catheterization laboratory required. I am looking for a laboratory with two cardiac catherterization suites wit... View More
North Carolina NCDEH Analytical Chemistry Laboratory needed for nitrate test on three fresh water well systems. View More
Midwest USA Bioanalytical Laboratory needed to perform precision and accuracy testing on several blood glucose monitoring systems. We would provide t... View More
Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis... View More
Mechanical /Physical Lab needed for ANSI Product Safety Testing to CE Standards of dynamic and static strength of Full body Harness and other fall arr... View More
Physical Laboratory needed for maximum load testing for steel, plastic, aluminum wall systems and components for home storage
View More
Microbiology Laboratory needed for Testing of cotton based mulch for biodegradation (aerobic and anaerobic). Also, testing of various cotton products... View More
Mechanical Analytical Chemistry laboratory needed to test electronic device (Aircraft Warning Light Systems)
FAA Certification in accordance with AC1... View More
Analytical Chemistry needed for routine HPLC analysis (SEC and RP HPLC). The facility should have well maintained HPLC systems and can provide fast an... View More
Analytical chemistry laboratory needed for testing skin absorbption/leech qualities of nano finished textiles intended to have skin and mouth contact ... View More
Mechanical laboratory needed for comparision testing of two different types of washing systems that we use to clean the coils of saw blades(manufactur... View More
Analytical Chemistry Laboratory needed for fuel contaminates testing on 4 150ml fuel samples taken from fuel systems on a vehicle fleet that we believ... View More
FAA Mechanical Laboratory required for installation and integration testing of aircraft air management systems for certification testing. View More
Water purification systems company needs microbiology laboratory for water testing for jaundice, diarrhea & typhoid. View More
Materials laboratory needed for ASTM Non-Destructive testing of Socket Weld Valves from the manufacturer. View More
Mechanical laboratory needed for testing measurements of force (.01 - 1.0 lb) required to insert various components through various valves View More
Electrical laboratory needed for IEC electical temperature rise test according to IEC 60439-2 for busbar trunking systems. View More
Electical laboratory needed for EMC Testing of Large UPS Systems Testing of immunity and emmissions of a 750kVA UPS system in a test bed in a facility... View More
ISO electrical laboratory needed for equipment parameters testing (interfaces, signaling systems, protocols, transmission, operation and performance p... View More
Electrical laboratory needed for Electro magnetic compatibility survey testing. The survey environment includes the comms systems, microwave facilitie... View More
Mechanical laboratory needed for final Quality Inspection Testing of brake systems from Indonesia (hand levers and brakes for bikes). View More
Highly experienced FDA GLP Bioanalytical laboratory needed for analyzing aqueous samples containing very hydrophobic small molecules from various labo... View More
GLP toxicology laboratory needed for in vitro genotoxicity testing a. Salmonella typhimurium reverse mutation assay. b. Escherichia coli reverse mutat... View More
EPA and FDA GMP Analytical Chemistry Laboratory needed for formulation testing of fragrance or flavor oils to develop liquid or aerosol delivery syste... View More
Microbiology laboratory needed for NCCLS testing (M40-A.NCCLS)of Transport Swabs. Quality control of microbiological transport systems. Approved stand... View More
Materials laboratory needed for GPC analysis of n-isopropylacrylamide polymers (aqueous systems) View More
Physical laboratory needed for testing BT output for natural gas and propane outdoor gas burning systems used in outdoor fireplaces. We have an 18" m... View More
Microbiology laboratory needed for full validation and testing of UV sterilization system against 2 competitor sterilization systems. Experience with ... View More
European physical laboratory needed for Experimental modal analysis at high level of amplitude (500 until 1000 N or more) on parts of a rocket engine ... View More
gas chromatograph testing for total halogenated hydrocarbons, hydrocarbons as methane for medical device medical gas systems. View More
Need to find a cutting edge/high quality laboratory in the EU for
-high quality liquid chromotography/mass spectrometry, and/or MALDI-TOF and SELDI-T... View More
Subchronic toxicity, implantation and carcinogenicity. Material (fluorosilicone oil) to be used in long term implantable device (brain valves) View More
Popular Industries