Laboratory Requests

ASTM Surgical Sealant Burst Strength

Medical Device Contract Lab needed that who can conduct ASTM F2392 Burst strength test for surgical sealant. View More

IEC Home Health Medical Electrical Equipment Testing

Large Medical Device Company needs Laboratory for IEC Testing for Mechanical Strength testing includes Drop test and Impact test to IEC 60601-1 Standa... View More

FDA Bioburden / Disinfection Efficacy Study

Medical Device Company needs FDA GMP Microbiology Laboratory for bioburden testing on a liquid-cooled patient cooling and warming system (electronic) ... View More

Rat Myocardium TEM Images

Medical Device Company needs USA Microscopy Laboratory needed for TEM images from paraformaldehyde fixed myocardium of rats. View More

Reusable Medical Equipment Processing Validation Testing

BUDGET APPROVED USA FDA Medical Device Laboratory needed for 510(k) validation testing of processing for 2 different models of reusable medical equip... View More

ANSI/AAMI ECG Gel Electrical Performance Testing

Medical Device Laboratory needed for ANSI/AAMI electrical performance testing of ECG gel ANSI/AAMI EC12:2000/(R)2010. View More

ISO Breast Implant Fatigue and Diffusion Testing

Medical Device Laboratory needed for ISO Medical Device Testing of Breast Implants to ISO 14607:2018, especially the fatigue test (Annex C.1), the si... View More

ISO Medical Device Bioburden Testing

Large corporation needs USA Microbiology Laboratory for ISO bioburden testing for a medical device including Aerobes, Sporeformers and Fungi to ISO 11... View More

Anti-Factor Xa Analysis

Medical Center needs Clinical Laboratory for Anti-Factor Xa testing View More

Collagen Aminio Acid Analysis

Medical Device Company needs Bioanalytical Laboratory needed amino acid analysis for fibrillar collagen material. View More

ASTM medical examination glove testing

Medical Device Laboratory needed for ASTM medical examination gloves testing to ASTM D6978-05 (chemotherapy drug permeation for gloves) testing labor... View More

Low Dermatitis Clinical Trial on Sensitized Individuals

$100,000 BUDGET APPROVED FDA Clinical Research Laboratory needed for Clinical Trial on Low Thiuram, and/or Carbamate, and/or Thiazole Claim for Nitril... View More

INetwork Laboratory

LONG-TERM TESTING Integrated medical office focused on wellness and looking for an In & Out of Network laboratory for basic blood panels, such as for ... View More

Drug, Urinary Tract Infection and Women's Biopsy Testing

Clinical Laboratory needed for performing a women's medical group's drug testing, urinary tract infection, women's biopsies for about 200 samples. View More

ISO Steam Heat Sterilization Validation

Biomedical Company needs Contract Sterilizer for ISO sterilization validation and routine sterilization of steam heat. View More

Medical Device Speculum Testing

Medical Device Laboratory needed for speculum testing for TM-334,vaginal speculum break testing View More

FDA GLP Catheter Preclinical Studies

Biotechnology Company needs FDA GLP Preclinical Medical Device Product Safety Contract Research Organization for the following studies on Catheter Tub... View More

ISO Medical Device Certification

Medical Device Company needs USA Laboratory for ISO certification of one new buzzer for one of our products. We need to test under the ISO 3744:2010 ... View More

Small Batch EO Contract Sterilization

Biomedical Company needs Contract Sterilizer for small batch EO sterilization during r/d View More

RFQ: Flashpoint Testing.

Nanotechnology company would like to get a quote for running 1 liquid Sample for flash point testing along with the turn-around time. Please provide q... View More

Energy Output

Energy Company needs Central Europe Laboratory for testing a black box technology to measure the energy output and attest to the findings. View More

Contract Sterilization Re-Usable Medical Components

Contract Sterilizer needed for contract sterilization of re-useable medical components. Qualified-Cycle or Validated-Cycle process for human use compo... View More

Condom Biological, Toxicity, Microbiology and Packaging Studies

Product Safety laboratory needed for ASTM and ISO testing of a liquid applying the following tests: ASTM D7661-10, Standard Test Method for Determini... View More

Nanoparticle Coating

Nanotechnology Laboratory needed for nanoparticle coating solutions testing based on metal dioxide Nano particles used for coating of SS steel.we have... View More

Industrial Robotics Application Testing

Technology Laboratory needed for Industrial Robotics Application Testing in Multiple areas:
System reliability
Accuracy Test
Repeatability
Functio... View More

ISO Cytotoxic Infusion Pumps Polymer Degradation

Medical Device Laboratory needed for ISO medical device degradation testing of polymer when used with cytotoxic drugs (i.e., cisplatin and 5-fluorour... View More

ISO Blood Bag Testing

Medical Device Laboratory needed for ISO testing on empty blood bags as per ISO 3826-1

Only The following sections:

Section :6.2.5
Section ... View More

AAMI ECG Cable Testing

Medical Device Laboratory needed for AAMI testing to Medical Device ECG cable standards. Does AAMI EC-12 reference AAMI EC-53 for noise spec? I know ... View More

Chemotherapy Drug Compatibility Testing

Medical Device Laboratory needed for compatibility testing of medical devices, tyvec tubing and plastics for compatibility with chemo drugs View More

Reusable Surgical Medical Equipment

Medical Device Laboratory needed for ISO and AAMI Testing for verification and validation of cleanliness requirement for reusable surgical medical equ... View More

ISO Sphygmomanometers Testing

Medical Device Laboratory needed for ISO testing Sphygmomanometers to ISO 81060-1 standards for Sphygmomanometers including
it would involve pressu... View More

Medical Laboratory

USA Medical Laboratory needed for Routine biochemistry,haematology,urine and stool analysis and microbiology and serology View More

Thermoset Nanocomposite Synthesis and Characterization

Nanotechnology laboratory needed for synthesis and characterization of new thermoset nanocomposites based on polymer and montmorillonite clay to be u... View More

AOAC Sporocial and Disinfectant Efficacy Testing

Large Pharma / Medical Device Company needs Microbiology Laboratory for AOAC sporocidal and disinfectant efficacy testing. View More

HIV-1 Genotyping for RT and Integrase

Large Medical Center needs Genetics Laboratory for HIV-1 genotyping test for RT and Integrase as part of HIV-1 research project, we are growing T cell... View More

ASTM Shipping Container Performance Testing

Packaging Laboratory needed for ASTM packaging transportation testing for medical product which comply to ASTM D4169 Standard Practice for Performanc... View More

ISO Bone Graft Substiture Testing

FDA GLP Medical Device Lbaoratory needed for Biocompatibility testing on bone graft substitute according to ISO 10993. View More

ISO Medical Device Genotoxicity Testing

Toxicology Laboratory needed for ISO Genotoxicity testing a silicone part ussed in a medical application to ISO 10993
(Body contact: Tissue / Contact... View More

ISO Contact Lens Compatibility Testing

Medical Device Laboratory needed for ISO compatibility testing to standard ISO 11981, Ophthalmic optics - Contact lenses and contact lens products - D... View More

Urine Testing

Medical Center needs British Columbia Medical Laboratory for urine testing of 1-hydroxypyrene after PAH exposure.
View More

In Vivo Acute Toxicity and Product Safety Study

FUNDING APPROVED Preclinical CRO needed for in vivo acute toxicity and product safety study of pharmaceutical drug coating using 5 different medical d... View More

ASTM Medical Fixation Device Testing

Medical Device Laboratory needed for ASTM testing of orthopedic intramedullary nail to ASTM F1264 Standard Specification and Test Methods for Intrame... View More

Plastic Parts Resin Confirmation

BUDGET APPROVED Medical Device Company needs Materials Laboratory resin confirmatory testing of the parts used in 2 plastic disposable infusion sets... View More

Pain Treatment Genetics test Study

Medical Center developing pain treatment needs Genetic Laboratory for genetic testing study with both nuclear and mitochondrial DNA Pain Treatment ha... View More

THC Medical Cannabis

UK Laboratory needed for THC testing in medical cannabis. View More

Phototherapy Mask Spectral Transmittance

Medical Device Safety Performance Laboratory needed for EN Spectral transmittance in the ultraviolet for phototherapy masks using the European Standar... View More

FDA 510(k) submission Nebulizer Aerosol Testing

FDA cGMP Medical Device Laboratory needed for Nebulizer Aerosol Testing for a FDA 510(k) submission. Manufacturer device and predicate device. View More

ASTM Biomechanical Testing of Orthopedic Implants

Medical Device Laboratory needed for Biomechanical testing for orthopedic implants i.e. interlocking nails, bone plates, bone screws and spine fixatio... View More

Custom R&D Study V79 colony formation cytotoxicity project

CUSTOM Medical Device Laboratory (ideally in USA) needed to initiate a custom Research & Development R&D Study V79 colony formation cytotoxicity proj... View More

ISO Opthalmic Implant Intraocular Lenses Testing

Medical Device Laboratory needed to perform hydrolytic, biocompatibility, and photostability test for hydrophobic intraocular lenses as per ISO 11979 ... View More

Dental Products Cleaning Residues

Medical Device Company needs Laboratory for cleaning residues testing (cleaning agents) per MSDSs on dental products. View More

Dental ISO RoHS Compliance Testing

Medical Device Company needs Laboratory for ISO RoHS Compliance Testing to determine the concentrations of restricted RoHS substances in the test sam... View More

ASTM Condom Compatibility Testing

Medical Device Laboratory needed for ASTM Condom Testing to ASTM D7661-10 Standard Test Method for Determining Compatibility of Personal Lubricants wi... View More

ISO and IEC Dental Equipment Testing

Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More

ISO Medical Humidity Exchanger Testing

Medical Device Company needs Performance Laboratory for ISO Testing for pressure drop and moisture loss and salt testing on heat and humidity exchange... View More

Medical Device ASTM Biodegradation

Medical Device Company needs Microbiology Laboratory for ASTM Biodegradation of Plastic Materials to ASTM ASTM D5511 Standard Test Method for Determin... View More

New CLIA Breast Cancer Test

LONG-TERM TESTING Texas CLIA certified laboratory needed for introducing a new diagnostic test for breast cancer with 1000 samples per month. The labo... View More

Early Cancer Warning System Biomarker Testing

PRODUCT DEVELOPMENT CLIA Certified Clinical Laboratory needed for assisting a company in the development of an early warning system for cancer. Labora... View More

Toronto Laboratory Rental Space Needed

Medical Device Company would like to rent Canada laboratory space to rent foanimal electrophysiology research in Toronto, ON, Canada. We will provide ... View More

ISO Respiratory Medical Device Evaluation

Medical Device Laboratory needed for ISO evaluation of which medical device which comes under the respiratory devices category to ISO 5356 Anaesthe... View More

Multiple/ Long-Term 24 Hour Turn-Around Clinical Diagnostic Services

LONG-TERM TESTING USA Full Service Clinical Diagnostic Laboratory needed to perform 24 hour turn-around on the following laboratory services: blood wo... View More

FDA GMP Monoclonal Antibody Batch Release Testing

Large Biotechnology Company needs FDA GMP Bioanalytical Laboratory for monoclonal antibody testing for GMP batch release
- physiochemical methods (co... View More

Pharmaceutical Chemotherapy Usability Lab Space

Medical Device Company needs Laboratory Space tohire to conduct usability studies on a new vial adaptor on a chemotherapy drug. Please provide the cos... View More

Biological Enzyme RV Deodorizer Product Development

PRODUCT DEVELOPMENT USA Biotechnology Laboratory needed for formulation of a biological/enzyme based RV holding tank deodorizer View More

ISO Prothesis Certification

Orthopedic Medical Device Laboratory needed for biophysical /biomechanical testing/ ISO certification of medical prothesis products with ISO 10328 'Pr... View More

ICH Silicone Medical Device Shelf-Life Aging Study

Experienced Medical Device Laboratory needed for ICH shelf-life study of a medical device made of 100% Silicone. While we have a shelf-life for the ra... View More

FDA GMP Personal Lubricant Laboratory Analyses

USA FDA GLP Medical Devices Laboratory needed for ASTM and USP personal lubricant testing for the following:

Osmolality USP<785>
Specifi... View More

Medical Equipment IEC Certification

ILAC accredited Laboratory needed for IEC Electrical Certification and EMC testing on two different types of Medical Equipment.

Monitor Pre-config... View More

ASTM Condom Compatibility

Medical Device Laboratory needed ASTM compatibiity testing of lubricant with condom as per ASTM D7661-10 Standard Test Method for Determining Compati... View More

ISO Prosthetics Structural Testing

Medical Device Laboratory needed for ISO prosthetics testing according to iSO 10328 Prosthetics -- Structural testing of lower-limb prostheses -- Requ... View More

Medical Device Pathogen Testing

US Pacific Norhwest Microbiology Laboratory needed for testing medical device against 5 pathogens that are exposed to UV-C, and then confirm the kill... View More

OECD GLP Bone Graft Biocompatibility Study

Medical Device Manufacturer needs FDA GLP Medical Device Product Safety Laboratory for OECD biocompatability study of bone graft material. View More

DEVELOPMENTAL - Medical Device Orthopedic Implants

PRODUCT DEVELOPMENT Experienced Medical Device company working to develop new orthopedic implants needs Medical Product Safety Laboratory for conducti... View More

Postmortem Blood Testing

Clinical Laboratory needed that is capable of testing postmortem blood samples stored at a Medical Examiner.Coroner Office for the presence of Sodium ... View More

New Rapid Bacterial Enumeration and Identification System Research & Development

NEW PRODUCT DEVELOPMENT Microbiology Laboratory needed for Research and Development (R&D) assessment of a new Rapid Bacterial Enumeration and Identifi... View More

Reusable Orthopedic Medical Device CE Marking Evaluation

Medical Device Manufacturer needs Medical Device Laboratory for Technical, Clinical Evaluation, Biocompatibility, Biological, Sterility/Endotoxin, T... View More

ISO Medical Implant Biocompatibility Studies

Medical Device Manufacturer needs Product Safety Laboratory for ISO 10993 medical implants biocompatibility studies:
(sensitization, systemic toxi... View More

Medical Device Wearables Wireless Coexistence Testing

Medical Technology Wearables Company needs Laboratory for ANSI medical device testing for ANSI C63.27/D1.0: American National Standards Institute - ... View More

Hepatitis B Virucidal Efficacy Testing

Large Healthcare Corporation needs Microbiology Laboratory for EPA Hepatitis B virucidal efficacy testing of a preservative medium. Use of duck hep B... View More

Biomaterial MBEC Studies

Biomaterials Company needs Medical Device Laboratory to for both FDA GLP and non-GLP MBEC studies to determine a biofilm susceptibility to antibiotic... View More

Disinfectant Biodegradability Testing

Microbiology Laboratory needed for biodegradability testing for a medical disinfectant product formulated with 10% quaternary amonium and 12% glutaral... View More

IEC Medical Linear Accelerator

Electrical Laboratory needed for IEC testing of medical linear accelerator
according to IEC 60976 Medical electrical equipment - Medical electron ac... View More

ISO Medical Device Biocompatibility Studies

Medical Device Laboratory needed for ISO Biocompatibility and Toxicology Studies for an Intimate gel lubricant to ISO 10993 Biological evaluation of m... View More

IBD panel for Crohn's and Colitis.

Gastroenterology Office needs Medical Laboratory to provide their Irritable bowel disease or IBD panel for Crohn's and Colitis. View More

ASTM Condom Compatibility Testng

Medical Device Laboratory needed for ASTM condom compatibility testing to ASTM D7661-10 Standard Test Method for Determining Compatibility of Persona... View More

ISO Medical Device Microbial Penetration Study

Disposable medical device manufacturer.needs Microbiology Laboratory for EN 13795 (2011) + A1 (2013) ISO 22612 (2005) resistance to dry microbial
pen... View More

Breast Cancer Assays

University Research Scientist needs Bioanalytical Laboratory to conduct breast cancer related assays. MTT assay, western blotting on cell lines. View More

Medical Device Assay Development

Medical Device Laboratory needed to develop a colorimetric semi quantitative lateral flow assay for detection of malondialdehyde specifically, or all ... View More

Index of Refraction Testing

Large Medical Organization needs Laboratory for Index of refraction testing of a few clear, colorless liquids (relatively non-volatile, non-corrosive,... View More

Pharmaceutical LCMS correlation and confirmation testing

LONG-TERM TESTING CAP, COLA Accredited Laboratory needed for LCMS correlation and confirmation testing for cut-off levels on the following compounds:... View More

Rhinovirus Research Study

Canada Microbiology Laboratory needed for Rhinovirus Study Testing of 680 Samples for
1. Rhinovirus isolation from nasal wash specimens
2. Rhinoviru... View More

ASTM Solar Reflectance Testing

Technology Company needs USA Laboratory for Satellite ASTM Solar Reflectance testing to ASTM C1549 Standard Test Method for Determination of Solar Ref... View More

Waterproof Medical Grade Adhesive Reformulation

PRODUCT DEVELOPMENT Laboratory needed for reformulation of a Medical Grade Adhesive to make it more waterproof while ensuring it is still safe on a... View More

Medical Device Sterilization Comparison Study

FDA GMP and GLP Medical Device Laboratory needed for validation of the sterilization capabilities of two differently designed medical devices with th... View More

Dried Blood Spot Testing

LONG-TERM TESTING CLIA Medical Laboratory need for Dried Blood Spot testing of following panels to consumers at a capacity of 2000-3000 samples per m... View More

Catheter Kinetic-Chromogenic BET Testing

Medical Device Laboratory needed for Kinetic-Chromogenic Bacterial Endotoxin Test BET evaluation of catheters.. Please specify the kind of BET test m... View More

ASTM Emesis Bags Comparison Study

Medical Device Laboratory needed for ASTM testing of 4-5 different brands of emesis bags for thickness according to ASTM D8136 Standard Test Method fo... View More

Dried Blood Spot Research

Medical Device Company needs Bioanalytical Laboratory needed for dried blood spot research studies on collection device. View More

Medical Gown ANSI / AAMI and ASTM Testing

Materials Laboratory needed for ANSI, AAMI and ASTM Testing of medical protective gowns made out SMMS Material to ANSI/AAMIPB70 Liquid barrier perform... View More

Medical Device OECD Biocompatibility

Medical Device Company needs USA Laboratory for OECD compliant biocompatibility testing. View More

ISO Wheelchair Testing

Medical Device Laboratory needed for ISO testing of manual wheelchair testing, to the ISO 7176-8 standard Wheelchairs - Part 8: Requirements and test ... View More

Recombinant HGH Quality

Biotechnology company needs Bioanalytical Laboratory needed for verification of quality and contaminants of recombinant HGH including other proteins,... View More

Medical Gown Chemotherapy Penetration

Medical Device Laboratory needed for ASTM testing of medical gowns for chemotherapy permeation as per ASTM F739-99a (F739) Standard Test Method for Re... View More

Transfection of SH-SY5Y Neural Cells with Candidate Plasmids.

LONG-TERM TESTING Experienced Biotechnology Contract Research Organization needed to conduct ongoing in vitro studies with SH-SY5Y cells including th... View More

ISO Transfusion Set Testing

Medical Device Laboratory for ISO testing of transfusion sets to ISO1135-5 Transfusion equipment for medical use ? Part 5: Transfusion sets for singl... View More

Hereditary Cancer and Pharmacogenetics

LONG-TERM TESTING Medical Company looking to expand it's services is seeking a Genetics Laboratory to perform various hereditary cancer and pharmacoge... View More

EN Medical Gauze Dressing

URGENT Medical Device Laboratory needed for conformity and odor control tests on two medical gauze dressing products including one with/ and one witho... View More

Anti-Müllerian Hormone Blood Spot Testing

Clinical Laboratory needed for endocrinology testing for Anti-Müllerian hormone (AMH), also known as Müllerian-inhibiting hormone (MIH Anti-Mullerian... View More

HALT / HASS Testing

Technology Company needs Electrical Laboratory for Highly Accelerated Stress Screening HASS / Highly Accelerate Life Test HALT HALT Testing of elect... View More

Drugs of Abuse Testing

FDA cGMP Clinical Laboratory needed for comparison of drugs of abuse with new medical diagnostic device to mass spectrometry analysis. View More

Quotation for EP 5.1.3 standards Antimicrobial Effectiveness Testing

Medical Device Laboratory needed for EP testing of PET to EP 5.1.3 standards Antimicrobial Effectiveness Testin.g at 7 intervals - 0, 6,24,48 hrs and... View More

Qualitative Tuberculocidal Study

BSL-2 Microbiology Laboratory needed for qualitative tuberculocidal study including bacterial kill study, colony plating and counting similar to the ... View More

Human Hair Ethnicity

Large Medical Company needs Genetics Laboratory to determine the ethnicity of human head hair. View More

Sterilization Efficacy on Virus Growth Study

Medical Device Microbiology Laboratory needed for virucidal efficacy sterilization study for virus growth before and after exposure to sterilizing ag... View More

Pharmaceutical Nanotechnology

Large Pharma needs Nanotechnology Laboratory for analysis of inorganic salts. View More

Cellular Adherence Study with HeLA, BAE, SH-SY5Y Cells

Bioanalytical Laboratory needed for Cellular Adherence R&D Study on 2D glass samples with 4 different types of nanotechnology surface coating on 3 di... View More

Medical Device Development

Medical Device Laboratory needed with the capabilities to measure spray pressure being dispensed from an actuator in that an aerosol/bag on valve can... View More

Preservative Efficacy

Clinical Research Laboratory needed for non-GLP microbiology preservative efficacy study of conductive solid that works as a sensor on the scalp. to d... View More

Dental Product Safety Studies

Medical Device Laboratory needed for product safety tstudies of dental product used to absorb saliva.

View More

Pharma API and Finished Drug Product Testing

Pharmaceutical Laboratory needed for Active Pharmaceutical Ingredient API and final testing on our OTC and medical device products. View More

CLIA Clinical Laboratory

CLIA Clinical Laboratory needed for bioanalysis for FDA Clinical Trial of new regulated medical product used to assist doctor in diagnosis and treatme... View More

Medical Device Design Feasibility

Medical Device Laboratory needed for design feasibility testing of console with a different power supply, modified transmission, and modified User Int... View More

USP Protein Analysis

Biotechnology Company needs FDA GLP Compliant Bioanalytical Laboratory for USP analysis of aprotein sample (solution form) for Particulate Matter (fo... View More

CLIA Laboratory

LONG-TERM TESTING Medical Device Company needs CLIA accredited laboratory to distribute, manage, and rollout the devices at POCT clinical testing cen... View More

Osteoinductive Properties Bone Research

Preclinical Biophysical Laboratory specializing in bone research is needed for the evaluation of osteoinductive properties of a new medical device on... View More

Medical Device Compatibility of Lubricants with Rubber Latex Condoms

Medical Device Laboratory needed for ASTM testing of personal lubricants compatibility with natural rubber latex, polyurethane and polyisoprene condo... View More

Medical Device Certificate of Friction

Laboratory needed for Certificate of Friction COF testing of a polymer medical adhesive product. Testing to be performed in a reciprocal movement (bac... View More

Residual Host Cell DNA by qpcr

Biotechnology Company needs Genetics Laboratory needed to perform residual host cell DNA by quantitative polymerase chain reaction (qPCR),. Protein s... View More

FDA Medical Adhesive 510k Equivalence

FDA Medical Device Laboratory needed for validation, evaluation, and toxicology testing of UV medical adhesive (USP class VI) that is used integrat... View More

female menstrual hygiene product

Medical Device Laboratory needed for product safety testing of female menstrual hygiene product to ensure it is free from toxins and dyes and safe to ... View More

ANSI ECG Electrodes Performance

Medical Device Laboratory needed for ANSI/AAMI electrical performance testing of disposable ECG electrodes in compliance with ANSI/AAMI EC12:2000/(R)2... View More

Medical Clinic Testing

LONG-TERM TESTING Medical Clinic with two locations needs outside clinical laboratory to perform multiple laboratory services for our urgent care and ... View More

Medication Testing

Medical Doctor's Office needs Analytical Chemistry Laboratory for confirmation of ingredients of 2 medication pills View More

Pharmaceutical / Medical Device DSC Analysis

FDA cGMP Laboratory needed for Differential scanning calorimetry DSC analysis of 30 samples of a combination pharmaceutical/medical device according t... View More

Microbiological Tests

Microbiology Laboratory needed that can perform some older technology analytical methods for microbiological tests specifically a cylinder plate agar ... View More

AAMI ECG Electrode

Medical Device Laboratory needed for AAMI testing of disposable ECG electrodes to standard - AAMI EC12:2000/R2015. The tests required are, DC offset,... View More

Laboratory Development

Laboratory Consultant / Architect needed to design analytical research and diagnostic laboratory. which provides analytical services in medical, veter... View More

Hereditary saliva cancer tests

LONG-TERM TESTING Medical company exploring offering hereditary saliva cancer testing from it's network of doctors researching having genetics Laborat... View More

Soft Contact Lens Testing

Medical Device Laboratory needed for soft contact lens testing for measurements such as: light transmittance, mechanical properties, oxygen permeabili... View More

Medical Device Cytotoxicity and In Vitro Irritation

Medical Device Laboratory needed for ISO testing of medical disposables to ISO 10993-5 Cytotoxicity and ISO 10993-10 Irritation Oral Stimulation and ... View More

Ventilator Testing

Medical Device Laboratory needed for ISO Testing on apparatus used on ventilator according to ISO 5356-1 Anaesthetic and respiratory equipment -- Con... View More

Medical Device GLP Toxicokinetic Studies

FDA GLP Certified Toxicology Laboratory is needed for medical device toxicokinetic study (for degradation products and leachables) according to ISO 10... View More

Tests for Medical Device In Vitro Cytotoxicity.

ISO Certified Medical Device Product Safety Laboratory needed for ISO 10993-5: Biological Evaluation of Medical Devices, Part 5: Tests for In Vitro Cy... View More

IEC Compliance of Medical Electrical Equipment

Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More

Medical Implant Cleaning Validation and Steam Sterilization

US FDA Medical Device Laboratory needed for cleaning validation and steam sterilization studies for medical implant and instrument set. Set is in rig... View More

Implantable Medical Device Simulation

Medical Device Laboratory which has a MRI scanner needed for evaluation of implantable medical device. View More

ISO Contact Lenses Analysis

FDA GLP Medical Device Laboratory needed for ISO testing of soft contact lenses according to ISO 18369-3 Ophthalmic optics -- Measurement methods and ... View More

EN Medical Device Evaluation

Medical Device Laboratory needed to perform testing as per EN 13544-2 (Respiratory therapy equipment. Tubing and connectors)
- A.3 Test method Resis... View More

TB Assays Comparison Study

LONG-TERM TESTING Clinical Diagnostic laboratory needed that runs TB assays/tests to conduct a comparison study of TB sample processing methods. - sam... View More

Tumorigenesis Study

Large Medical Device Company needed Toxicology Laboratory for Tumorigenesis Study according to Stem cell guidelines 2017 India and as per schedule Y o... View More

Clinical Genomic Testing

LONG-TERM TESTING Medical Company needs Genetics Laboratory for clinical genomic testing using either microarray to NxtGen testing for our patients. ... View More

Medical Device Biological Evaluation

Implantable Medical Device Manufacturer needs Product Safety Toxicology Laboratory for in vivo irritation testing as per ISO 10993-10 Biological eval... View More

ASTM Condom Compatiability

Medical Device Laboratory needed for ASTM Testing of personal lubricants for compatiability with natural rubber latex, polyurethane and synthetic cond... View More

Biomedical Research Laboratory needs laboratory supplier for providing a quote on a variety of instruments, apparatus, reagents etc. This document is... View More

Antibody Testing

Bioanalytical Laboratory needed for Antibody testing for human parasitical infection with Sparganosis (Spirometra) by ELISA View More

Surgical Gown Comparison Study

Large Organization needs Medical Device Laboratory for comparison study on 3 or 6 Surgical gowns suppliers testing against BS EN 13795 , including Wet... View More

Air Purifier Evaluation

PRODUCT DEVELOPMENT Microbiology Laboratory needed for particulate and virus/bacteria count from an air purifier to be manufactured View More

Blood Borne Pathogen RNA/DNA Testing

Life Science Laboratory needed for blood borne pathogen rna/dna testing on human liver samples. The samples are part of a biorepository. View More

Leukocytes Analysis

Medical Device Laboratory needed for Clinical Study urine analysis for concentration of leukocytes. The following needs to be performed:
Negative uri... View More

ISO Medical Device IV Injection Testing

Medical device manufacturer seeking testing compliant with ISO 15747:2010, Plastic containers for intravenous injections relating to safe handling an... View More

Acquisition of Medical Labs

Company looking to purchase numerous, well-established medical testing laboratories. Looking for established business with employees, not a one man sh... View More

DNA Drug Metabolism

Medical Office needs Genetics Laboratory for DNA drug metabolism testing. View More

Medical Device ASTM Packaging Testing

Packaging Laboratory needed for ASTM medical device testing to ASTM D4169 Distribution Cycle 12 Test (Shock/Drop, Compression, Vibration, Low Pressure... View More

Optical Testing

Large Innovative Electronics Company needs Materials Laboratory for wavefront optical testing. View More

Cleaning validation

Medical Technology Firm needs Medical Device Laboratory for validation assistance on two cleaning processes validations. We have already started the c... View More

Toxicity of Menstrual Device

Medical Device Toxicology Laboratory needed for toxicity study testing for menstrual device. View More

Calibration of Reference Sound Source

Technology Firm needs ISO 17025 Calibration Service Provider needed for calibration of Reference Sound Source for a 1 year cal cycle. View More

Medical Device Biocompatibility Studies on Textile Products

Medical Device Laboratory needed for bio-compatibility studies on whitened cotton textile products including cytotoxicity test and primary skin irrit... View More

Medical Device Laboratory needed for ISO mechanical testing for joint simulator tests to ISO Standards ISO 14243, ISO 14242, ISO 18192


View More

Medical and Laboratory Equipment Manufacturer wishes to purchase a laboratory that sells and repairs equipment. View More

LONG-TERM TESTING Long-term care facility needs CLIA medical laboratory to process drawn ordered patient tests weekly. Clinical Laboratory must meet C... View More

FDA GMP Pharmaceutical laboratory needed for FDA compliant drug-drug interaction and leachable studies between 3 components of a new drug. All individ... View More

Medical Device Laboratory needed for shelf life testing of clinical medical devices View More

Hospital needs CLIA Medical Laboratory for asparaginase level analysis View More

Medical Device Company needs FDA Laboratory for Washer/Disinfector Cleaning validations View More

Medical Device Company needs 3rd party Product Safety Laboratory for Biocompatiability testing (cyto, irritation, sensitization)
View More

Medical Device Company needs Laboratory for cleaning validation testing to ISO standards. View More

Medical Device Laboratory needed for AAMI testing of for surgical gown to EN 868 part 2 for sterilization bag reel pouch View More

FDA GLP Product Safety Laboratory needed for biocompatibility testing for medical devices View More

Medical Device Manufacturer needs Contract Sterilizer for ETO and E-Beam sterilization experiments on materials used in medical devices. View More

Large Medical Device Company needs Laboratory for transportation environmental simulation studies on sterile disposables to simulate distribution acro... View More

FDA GLP Medical Device Product Safety Laboratory needed for ISO 10993-1 biocompatibility studies for implantable bone graft substitutes (granules), ... View More

FDA Contract Research Organization CRO needed for in vivo and in vitro studies of implant based bone cement medical device including material characte... View More

Electrical Certification Laboratory needed for electrical certification testing of various telecommunication devices
including BT/Wi-Fi Transmitter... View More

LONG-TERM Contract Sterilizer needed for sterilization of a range of measuring fragile medical equipment post contact with human tissue. Components mu... View More

Large Technology Company needs Automotive Laboratory for Cleanliness Testing To VDA and ISO Standards: VDA 19 Inspection of Technical Cleanliness - ... View More

Biotechnology company needs Microbiology Laboratory for viral efficacy testing of medicinal preparations against dengue virus. View More

LONG-TERM TESTING Nationwide medical network needs clinical diagnostic laboratory with PCR capabilities for testing 30 plus pathogens and antibiotic r... View More

URGENT Genetics Laboratory needed for integrity study of the DNA structure of a virus and bacteria of a material after running through a medical mach... View More

LONG-TERM TESTING Company seeks microbiology laboratory for certification testing on international standards of 3 medical disinfectant products for e... View More

Medical Device Laboratory needed for specification testing of #30 Dental Cements View More

Medical Device Laboratory needed for ASTM Testing of Protective Clothing to the following standards: ASTM F1670/F1670M Standard Test Method for Resist... View More

Biotechnology company needs microbiology laboratory for strain identification of spores, bacteria and fungus. View More

Bioanalytical Laboratory needed for Bovine Collagen III detection in Bovine Collagen I samples per ASTM impurity profile View More

FDA approved medical laboratory.needed for oocyte and sperm donor screening. View More

Contract Sterilizer needed for ETO and E-Beam sterilization experiments on materials for medical devices. View More

Nanotechnology Laboratory needed for AFM, TEM and SEM analysis for nanomaterial samples whose size ranges between 100-300nm, View More

Wearables Manufacturer needs Nanotechnology Laboratory needed for testing the negative ion/anion levels of a wearable clothing fabric. View More

Microbiology Laboratory needed for AOAC disinfectant efficacy testing for general disinfection on hard surfaces for use in Hospitals and medical Insti... View More

Medical Device Laboratory needed for cleaning and validation studies to support our class II medical device 510(k) submissions to the FDA- will need t... View More

Medical Device Laboratory needed that that is knowledgeable of and able to test for requirements of ISO5367 and ISO5356 requirements for medical breat... View More

Biotechnology Firm wishes to acquire an existing small producer of monoclonal antibodies View More

PRODUCT DEVELOPMENT Medical Device Laboratory needed for prototyping of a biomedical device (e.g. plaster, wound healing). View More

Medical Device Laboratory needed for sterilization procedure verification for an invasive tool with Autoclave Class B - ALARA type.
View More

Medical Device Laboratory needed for testing of a filter developed for a medical application.  The filter consists of a pleated element to trap partic... View More

URGENT Medical Device company needs preclinical Contract Research Organization for in-vivo surgical study of ECG data from a prototype cardiac monitor... View More

LONG-TERM SERVICES Contract Sterilizer needed for steam sterilization services for titanium medical devices, batches of 100-1000 peel-packs max 10 x 2... View More

START-UP Biomedical Imaging Laboratory needed for cadaver imaging & experimental testing focused on the computational biomedical engineering, involvin... View More

LONG-TERM TESTING Medical Device Microbiology laboratory of Bioburden and sterility testing for implantable medical device. WE will send product for ... View More

Company is looking to acquire an existing Medical Laboratory in the UK. The laboratory must offer diagnostic and microbiology services at a minimum View More

FDA Medical Device Laboratory needed for FDA testing required for 510k approval for contact lens case. Please see section 7 of this previously approve... View More

Medical Device Laboratory needed for ASTM compatibility testing of personal lubricant products to ASTM D7661-10 for compatibility with natural rubber ... View More

Medical Device Manufacturer needs biomechanical laboratory for ISO 10328 Lower limb prosthesis structural testing View More

Large Medical Device Manufacturer needs Third-Party Laboratory for performance testing of a room air cleaner for smoke and pollen. View More

Medical Device Manufacturer needs materials laboratory for grout analysis for reformulation purpose View More

Healthcare manufacturer needs Microbiology Laboratory for Bacterial Suspension Testing using P. aeruginosa. Specifications are: Suspensions diluted ... View More

LONG-TERM Medical Center needs Ethylene Oxide Contract Sterilizer for outsourcing their EO sterilization. Medical Center is in preliminary exploratio... View More

Company wishes to purchase a Medical Laboratory in DFW -Tx View More

Europe Biotechnology Company needs laboratory engineering firm to design and build a grade b clean room facility in South America. View More

Company needs to purchase consumables for biomedical testing such as ASTM F1717, F543, F2009 from laboratory supplier. View More

Medical Devices Laboratory needed for performance and microbiology testing of medical textiles to EN 13795: 2011 A1: 2013 including Tensile strengt... View More

Medical Device Laboratory needed for sterilization validation testing of surgical instruments. View More

Company looking to purchase existing medical laboratory for Lyme disease testing and co infections in Canada
View More

Medical Device manufacturer needs Contract Sterilizer for gamma or e-beam sterilization of diamond dental burs View More

LONG-TERM SERVICES Medical device company needs contract sterilizer for gamma sterilization and packaging of plastic disposable petri dishes. View More

Medical Device company needs materials laboratory for comparison of two adhesives to determine similarities and differences between the two such as ch... View More

Agriculture biotechnology company needs EPA GLP environmental toxicology laboratory for 4 ecotoxicology studies for a botanical active substance under... View More

Medical device company needs FDA consultant for advising on the registration and classification of self diagnostic kits prior to manufacturing. View More

Food importer needs food laboratory for product development and FDA testing of dried fruit including
nutritional and allergen analysis including a sy... View More

Medical Device company needs biomedical laboratory to run a number of tests using human blood pumped through a flow loop and assay for the concentrat... View More

LONG-TERM Contract Sterilizer needed for gamma sterilization of medical devices starting at 300,000 units going to 1 million in a year View More

Medical Device laboratory needed for CE Mark biomechanical testing of silicone liners for lower limb prostheses (amputees) to
ISO Standard 10328:200... View More

Medical device laboratory needed for physical testing of transfusion sets to the physical requirements of ISO 1135-4, Transfusion equipment for medica... View More

Medical laboratory needed for analysis of 159 samples from oxytocin human Elisa test kits View More

Medical Device laboratory needed for surgery simulation and functional testing of sterile surgical packs after sterilization including on:
- aged sam... View More

High complexity medical laboratory is seeking to expand to physician and private practice business and would like to purchase a lab that has existing ... View More

Medical device laboratory needed for several ASTM tests on orthopedic implant components as per ASTM F382 Standard Specification and Test Method for M... View More

MEDICAL DEVICE LABORATORY NEEDED FOR ISO TESTING OF RESUSCITATOR AS PER ISO 10651-4. LUNG VENTILATORS View More

Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification... View More

Medical device laboratory needed for drug compatiblity testing and testing of parenteral IV containers to ISO 15747:2010 which contains requirements t... View More

Medical Device Laboratory needed for conducting safety and efficacy study of ear candle which assists with ear wax removal. The study should show th... View More

FDA Medical device microbiology laboratory needed to perform multi-use testing assay on a liquid bandage medical device product. This assay is simil... View More

LONG-TERM TESTING University researcher needs medical device laboratory for oxygen Permeability testing of contact lenses View More

LONG-TERM TESTING Medical office needs clinical diagnostic laboratory for ISAC allergen panel testing of blood for allergy patients with strong or com... View More

LONG-TERM TESTING FDA GLP textiles laboratory needed for testing to provide profilometry data on our fabric samples used in medical / performance clo... View More

Medical Device company needs medical cath laboratory for in-vivo medical device acute physician training session View More

FDA compliant laboratory needed for a one-cycle Steam Sterilization Validation Study for a medical device View More

FDA Medical Device Laboratory needed for ISO VOC, particulate, CO and CO2 testing for ventilator components with dry gas pathway contact for emergency... View More

Nanotechnology company need materials laboratory for ASTM rain repellency testing via a Bundesmann Water Repellency Tester View More

FDA GLP Medical Device Laboratory needed for performance testing of medical resuscitator to ISO 10651-4 Manual Resuscitator. The test to be performed ... View More

LONG-TERM TESTING Medical Device Laboratory needed for dynamic fatigue testing of endosseous dental implants to ISO 14801 View More

LONG-TERM TESTING Bioscience company needs bioanalytical laboratory for raw material, in-process, and final product MAT or cell-based endotoxins testi... View More

Medical Device Laboratory needed for medical device testing of after Ehylene Oxide Sterilization for MEA, HSSA (and possibly LAL) . View More

Medical device laboratory needed for cleaning validation study of the water cleaning cycle of a plastic covered electronic tracking device . Simulati... View More

Medical Device laboratory needed for several microbiology and toxicology tests of a polypropylene orthodontic device.

o Mercury limits
o Mic... View More

Medical Device laboratory needed for ISO pre-compliance filter testing on medical ventilation module in accordance with ISO 23328-1:2008 standard, Bre... View More

Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: Gener... View More

Physical laboratory needed for flame retardant testing to Information Technology Industry Council. standard 'M1', Biometrics View More

Medical Device Laboratory needed for stability testing of medical implantable balloon in PBS solution at 37 degrees incubation with 200 grams weight f... View More

FDA GMP medical device laboratory needed for testing to support FDA 510(k) based on FDA-recognized consensus standards: 3-80 AAMI ANSI ISO 81060-1:200... View More

Medical device laboratory needed for surface topography imaging of titanium (machined and 3D-printed) spinal implants and surgical instruments includi... View More

Medical device microbiology laboratory needed for sterility testing of various medical device sets. View More

LONG-TERM TESTING Medical Device Laboratory needed for sterility test method validation and then routine sterility testing of medical device component... View More

Telecommunications test house needed for UWB radio transmitter testing to measure the power and spectrum to EN 302065 Electromagnetic compatibility an... View More

Medical therapeutics company needs CLIA clinical laboratory needed for quantification of primary and secondary bile salts in stool samples using gas c... View More

Medical device laboratory needed for ISO testing of blue light and UV ray blocking optical lenses including ISO 8980-3, Ophthalmic Optics - Uncut Fini... View More

Medical Device company needs packaging laboratory for transportation simulation studies of polypropylene and polyethylene medical devices with a shelf... View More

Pharmaceutical company needs mechanical laboratory for ISO functionality (force testing) of medical instruments to ISO 11608-1 Testing of auto injecto... View More

ISO 17025 medical device laboratory needed for full VDmax25 sterilization validation on titanium orthopedic screws to ISO 11137 including bioburden va... View More

Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:

F2052 Test Method fo... View More

Performance laboratory needed for furniture life-cycle testing of seat back recline latch used as a medical device accessory to a wheelchair mechanism... View More

Virology laboratory needed for virus transfer study of medical device membrane blood filter. View More

FDA GMP Medical Device Laboratory needed for ASTM testing of surgical gowns for compliance to ASTM D737-04 (2016) Air Permeability. View More

Medical Device Laboratory needed for ASTM testing of condoms to ASTM D7661-10, Standard Test Method For Determining Compatibility of Personal Lubrican... View More

Microbiology laboratory needed for antimicrobial efficacy testing of an aloe bar soap to be used in medical facilities, nursing homes, and long-term c... View More

Medical device laboratory needed for biocompatibility testing of long term orthopedic implants to ISO 10993-1 (Biological Evaluation of Medical Devic... View More

Medical device laboratory needed for physical ASTM testing of a range of titanium surgical-grade products to the following ASTM Standards: ASTM F2052... View More

ISO and FDA cGMP Medical Device Laboratory needed for validation study of the cleaning, disinfection (manual and automated), and sterilization of medi... View More

Orthopedics medical device laboratory needed for physical certification testing of prosthetic devices to ISO10328 (Prosthetics - Structural) for a low... View More

Medical Device Laboratory needed for microbiology and physical testing of medical drapes and surgical gowns to several EN ISO standards:
1. EN ISO 2... View More

Medical device laboratory needed for biodegradability testing on two different types of medical gloves to ASTM D5511 - Standard Test Method for Determ... View More

FDA cGMP Medical device laboratory needed for product safety and toxicology study testing of water based personal lubricant including

1) Condom bio... View More

Medical Device laboratory needed for physiochemical testing including thermal, mechanical and dynamic analysis to support the development of a new tra... View More

Large pharmaceutical and medical device company needs bioanalytical laboratory for a study using reverse transcription-polymerase chain reaction (RT-P... View More

FDA cGMP medical device laboratory needed for condom biocompatibility testing in accordance to FDA guidelines. View More

Large company needs medical device laboratory needed for ASTM testing of 4 orthopedic products including metallic medical bone screws, metallic angled... View More

Laboratory needed for waterproof testing of medical alert device to International Electrotechnical Commission (IEC) IP code rating IPX6. View More

Medical device / materials laboratory needed for ASTM testing of personal protective equipment / gloves to ASTMF2878-10 (Needle Stick Test) View More

Microbiology laboratory needed for medical device disinfectants virucidal efficacy testing to the following:
MDD 93/42/EEC Class IIB) according to E... View More

Polymer laboratory needed to identify composition of a gelatinous elastomer product and a coating product used for breast prostheses and other medical... View More

LONG-TERM TESTING Medical device materials laboratory needed for ASTM testing: active Af temperature of wire using DSC per ASTM F2004, Standard Test ... View More

Biomechanical / medical device laboratory needed for development of spinal implantable device manufactured with implantable grade PEEK and Titanium 3.... View More

FDA / GLP certified and AAALAC registered medical device Contract Research Organization CRO needed for preclinical in vivo thrombogenicity study of im... View More

Large technology company needs electrical laboratory needed for IEC fire testing of dry transformer to IEC 60076-11 F1 Fire Resistance View More

Medical Device company needs physical chemistry laboratory for surface tension and surface energy testing View More

Bioanalytical laboratory needed for analytical chemistry and microbiology testing to support stability extension of hydrolyzed collagen used in medica... View More

ISO 17025 medical device laboratory needed for cleaning / sterilization validation testing on bone fixture medical devices. View More

Medical device safety laboratory needed for biocompatibility testing of medical devices. View More

Medical device microbiology laboratory needed for USP sterility and endotoxin testing of a pre-assembled medical kit including: gauze, syringe, scisso... View More

Molecular Diagnostics company needs Contract Research Organization CRO for biocompatibility testing services. View More

Medical device laboratory needed for acoustical testing of ultrasound gel for sound velocity, acoustic impedance, and sound attenuation.. Please provi... View More

Health company needs materials laboratory needed for non-destructive NDT optical testing including surface roughness analysis of non-flat surface. View More

Medical device laboratory needed for light safety testing of an opthalmic instrument according to ISO 15004. View More

URGENT. Serology laboratory needed for bioanalytical testing of blood for cytotoxicity, thrombin generation, and blood clotting factors. View More

Genomics laboratory needed for rapid amplification of the polymorphic DNA (RAPD) testing of 200 human biological samples.

View More

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 6... View More

Medical Researcher needs Bioanalytical laboratory needed liposome suspension testing for quantification of residual ethanol in aqueous buffer (PBS) View More

Biomedical laboratory needed for identification of bloodbourne pathogens. View More

Packaging Laboratory needed for medical device package design qualification testing of a UN 4G fiberboard box
and 47 x 40 x 1.5-mil poly red bag with... View More

Medical Device Laboratory needed for Acoustics and Bench Testing:  Sound Velocity, Acoustic Impedence, Sound Attenuation; Physical Measurements:  Visc... View More

FDA GLP ISO-17025 bioanalytical laboratory needed for characterization of collagen scaffold medical device including amino acid analysis, quantificati... View More

FDA Product Safety laboratory needed for toxicology studies of medical device (ultrasound gel) for biocompatibility:  cytotoxicity, irritation / intra... View More

Medical researcher needs bioanalytical laboratory for liposome suspension testing for quantification of residual ethanol in aqueous buffer (PBS) View More

Medical Device (Optics) laboratory needed for analytical chemistry testing of potential contaminants in a product coating liquid via NMR and FTIR. GC... View More

Agriculture Genetics Laboratory needed for GMO testing for cotton seed by PCR technology View More

Medical device company needs clinical product safety laboratory for in vivo, in vitro and microbiology testing of disposable feminine pads including: ... View More

Medical Device Manufacturer needs bioanalytical laboratory needed for USP particle analysis on samples taken from medical device. Please provide quote... View More

Medical Device laboratory needed for a cleaning validation study of a medical device. Validating manual cleaning and detergent type cleaning: chemical... View More

Medical Device company needs microbiology laboratory for microbiological tests of diapers and underpads. View More

URGENT TESTING FDA GMP Medical device preclinical laboratory needed for product safety and toxicity studies of a plastic dental aligner. Risk Assessme... View More

FDA GMP medical device microbiology laboratory needed for
antimicrobial efficacy testing of a wound dressing complying to FDA standards. View More

Pharmaceutical medical device laboratory needed for sperm motility testing of a personal lubricant according to ISO 10993-10. View More

LONG TERM TESTING Medical Device Company needs laboratory for dry He mass spectrometer leak detection testing with minimum sensitivity 0f 5x10 to the ... View More

Medical Device preclinical contract research organization CRO needed for insulin characterization with or without infusion through medical device: (1... View More

RAPID TURN AROUND NEEDED. Microbiology laboratory needed for efficacy testing of a disinfectant used for sterilizing medical equipment. Quote needed. View More

Medical device laboratory needed for cleaning and steam sterilization validation testing of a reusable medical implant completed on on a Scan Adapter ... View More

Medical Device company needs materials laboratory for mirror testing for reflectivity in the spectra range 600 nm - 1100 nm. View More

GLP medical device laboratory needed for gamma sterilisation validation testing of a dental implant, and shelf life testing of implant packaged in ult... View More

FDA GLP Product Safety Laboratory needed for Biocompatibility Testing for a medical device according to ISO 10993-1. Specifically Cytotoxicity testing... View More

FDA GLP Medical Technology laboratory needed for medical device testing for Characterization of mechanical properties. View More

Medical devices laboratory needed for ISO Testing of medical breathing tubing to ISO 5367 Annex A, Annex C, Annex D, Annex E, Annex F, testing of tu... View More

Medical devices laboratory needed for testing a medical plaster bandage according to Medical Devices Directive 93/42/EEC Annex VII for approval of Eur... View More

LONG TERM. URGENT cGMP analytical chemistry laboratory needed for metals testing using an ICP-MS with a sensitivity of 1ppb. View More

LONG TERM TESTING FDA cGMP microbiology laboratory needed for USP water testing of water for injection based on USP monograph for Sterile Water for I... View More

Medical device laboratory needed for permeability testing of different fabrics for patient comfort. View More

Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbi... View More

Radiochemistry laboratory needed for medical imaging certification testing of X-ray imaging machine. View More

Medical device laboratory needed for validation testing of endoscopy instruments. View More

Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & indu... View More

Former biotechnology laboratory space in tristate area Class-A Building for rent. Available space around 30,000 sq ft , will divide View More

High complexity medical laboratory services would like acquisition, partnership, or collaboration of a clinical laboratory in Ohio. View More

FDA GLP medical device preclinical laboratory needed for product safety testing of biodegradable implant for biocompatibility and cytotoxicity accordi... View More

Analytical laboratory needed for testing medical devices. View More

Biotech company needs Contract Sterilizer for gamma radiosterilization of medical device with cobalt-60. View More

Medical Device Laboratory for medical equipment verification testing of wheelchair, bed alarm sensor, and lift chair according to specifications.
... View More

LONG TERM TESTING: NABL and ISO/IEC 17025:2005.laboratory needed for osmolarity testing of personal lubricants View More

Clinical laboratory needed for plasma and urine intestinal fatty acid binding protein (I-FABP). View More

Orthopedics Medical Device Laboratory needed for ASTM Biophysical Testing: static compression, compression sheer, subsidence, dynamic compression, fat... View More

Personalcare company needs medical device laboratory for Health Canada Class ii tampon compliance testing prior to importation into Canada. View More

Large Clinical Research Organization (CRO) needs clinical laboratory for HMGCoA Reductase analysis on 240-250 samples. View More

Major Genonmics Medical Research Center needs virology laboratory for anthrax and other testing on mammoth bone sample from Russia prior to doing DN... View More

FDA GMP medical device laboratory needed for preclinical product safety testing: biocompatibility (10993) sensitization, cytotoxicity, irritation and... View More

Contract Research Organization needed for pharmaceutical clinical study on pre-exposure prophylaxis (PrEP) in drug users (n = ~400). PrEP involves ta... View More

Medical device company needs Electromyogram (EMG) done for small muscle activity related to eye movements. View More

Pre-clinical research laboratory with surgical capabilities needed to conduct ENT procedures on chinchillas to test a medical device. View More

Dental distribution company needs viral & bacterial (live/viable) analysis from wipe/swab samples. Analysis should include identification of specific... View More

GLP Compliant Laboratory needed for ongoing testing of regenerative drug development (Cell Therapy Hellas)
Test for:
1. HIV (anti-HIV (I/II), negati... View More

UK Medical device company needs paper surgical adhesive tapes tested
View More

Large medical company needs to test drug delivery of Taxol via small bore connections against chemical stress cracking per ISO 594-2, DIN 13276, DIN E... View More

FDA GMP Laboratory needed for FDA Nebulizer Aerosol Testing:
to FDA 784 Guidance: 27 aerosol tests (1 nebulizer model, 1 flow rate, 3 sample devices ... View More

US Pharmaceutical Company needs FDA GMP analytical chemistry laboratory for stability studies and methods validation by a FDA-approved HPLC method val... View More

Pharmacological laboratory needed to obtain an in vitro release profile of chitosan microspheres using spectrometerical analysis
View More

University needs industrial hygiene laboratory for solid waste management worker monitoring testing: Hair and nail samples for: HEAVY METALS (LIKE ME... View More

International biotech company needs: Bioanalytical assay development for PK analysis of glycosaminoglycan of in vivo plasma sample View More

Immediate need for clinical laboratory for blood wellness panel and urine toxicology for long term medication use. View More

FDA Compliance testing needed for a low level disinfectant to be used on Class 1 (non critical) medical devices.




View More

Large Pharmaceutical company needs analytical chemistry laboratory for USP Testing: Carbonates test in sodium bicarbonate per USP mongraph View More

Biotechnology laboratory needed for plant cellular analysis using southern blotting of putative transformants View More

FDA GLP Bioanalytical Laboratory needed for GLP Small Molecule Study for Molecular Level Study and Extinction coefficient for a small molecule in MeOH... View More

Pharmaceutical company needs Bioanalytical Laboratory for hematology analysis: bio-assay of erythropoitein View More

Contract Research Organization needed for Cardiology medical research studyto test an andotehelin receptor antagonist. Study includes the ability to... View More

Health care agency needs laboratory for Semen analysis View More

Preclinical Laboratory needed for biomechanical testing of Biologic implantables to be used as replacement tissue. Tests needed for mechanical propert... View More

Clinical Research Laboratory needed for Food Nutritional Clinical Trials which will include plasma, serum, blood and DNA analysis for Changes in phos... View More

Pharmaceutical Contract Research Organization needed for oncology preclinical study of a therapeutic nanoparticle drug delivery systemin Breast can... View More

URGENT TESTING Large Medical Device Company needs Microbiology laboratory for EP/USP Ethylene Oxide sterilization validation testing for 4 different... View More

Microbiology Laboratory needed for ISO antibacterial testing of nanoparticle embedded fabric for antibacterial properties to ISO 20743:2013 compliance View More

Medical Device laboratory needed for Dental product testing of dental implants, abutments and surgical equipments. for drills- for radial run out, t... View More

Medical Device Company needs Biomechanical Laboratory for ASTM / ISO medical device testing of orthotic that supports body part of patient having musc... View More

Medical Device microbiology laboratory needed for SAE and USP Testing of Nonwoven and Fibers to USP 61 and 62.

2.)We will also need testing done fo... View More

Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic r... View More

Rehab center needs Clinical Toxicology Laboratory for Urine analysis: drug and alcohol testing for about 2000 urine toxicology samples View More

FDA cGMP pharmaceutical Laboratory needed for viscosity testing: Magnesium Aluminium silicate. Sample solution: After determining the Loss on Dryin... View More

Food technology company needs Genetics Laboratory for DNA purification and QPCR analysis testing: Samples to be tested against 10 different primer/pr... View More

Medical Device Manufacturer needs laboratory for cleanliness testing of medical electrodes. View More

EN 17025 accredited virology laboratory needed for disinfectant testing: Virucidal activity against Murine norovirus of alcohol-free, ready-to-use an... View More

FDA registered Medical device laboratory needed for Residual solvent testing in Transdermal Patch View More

Genetics Laboratory needed for DNA and RNASE removal (cleaning) testing for disinfectants to remove DNA and RNASE View More

Laboratory needed for fluid and water testing of fluid and water used for new-technology fog making machines. View More

Electrical laboratory needed for electrical testing on new medical device prototype:
1.Ground Continuity test
2. High voltage test
3. Insulation Re... View More

Medical Device Laboratory needed for toothbrush bristle testing for stiffness of toothbrush bristle View More

Medical Device Laboratory needed for quality control testing of sanitary pads for all quality parameters including physical measurements. View More

Medical Device Product Safety Laboratory needed for all biological testing for latex based medical devices with colorants needed for CE mark, FDA, IS... View More

Preclinical Bioanalytical laboratory needed for biological medical device testing: FGF2 and glycosaminoglycans content in small intestine submucosa me... View More

Medical device laboratory needed for physical testing of gauze used to manufacture sterile wound dressings. View More

Contract laboratory needed for test methods development for medical device/ drug combination product. Development of a drug degradation test method fo... View More

Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on va... View More

Advanced technology company needs Laboratory for autoclave testing and Constrain testing on 27 samples View More

Industrial Hygiene Laboratory needed for swabbing and environmental monitoring testing for medical office View More

FDA GMP contract testing laboratory needed for full USP monograph testing on the following medical grade gases: N2, O2, CO2 as part of Raw Materials ... View More

Contract Medical Device Laboratory needed to perform testing on Disposable Blood Pressure Transducers in accordance to ANSI/AAMI BP22. View More

Medical Device Product Safety Laboratory needed for ISO biocompatiability testing of tattoo inks tested by ISO 10993-1 Biological evaluation of medica... View More

Medical Device Company needs medical technology laboratory for packaging/ product /development of developing a disposable medical cable assembly that ... View More

Medical device company needs virology laboratory for virus testing of surgical products Biologics View More

LONG-TERM TESTING Large Medical Device Company needs materials laboratory for RAL-GZ 387/1 compression testing for fabric View More

Technology laboratory needed for materials testing to develop the Flow Characteristic Chart (Pressure Drop vs Flowrate) for product.
Flow rate ranges... View More

Medical Device Laboratory needed for testing to develop methods for airway obstruction / choking hazard analysis View More

Oil technology development company needs toxicology laboratory LC 50 and LD 50 testing with some controlled versions of HF acid. Essentially, the ble... View More

ISO certified Medical Device Laboratory needed for Bio feedback system testing to 60601 CB Scheme. Possible FCC (and equivalent for EU, Japan, Brazil) View More

Orthopedics company needs medical device product safety laboratory for accelerated ageing testing of Orthopaedic implants in tyvek pouches including e... View More

Third-Party Consumer Products Laboratory needed for consumer labeling claims testing on nail technology that detects date rape drugs in a variety of ... View More

Medical Device Microbiology Laboratory needed for disinfection and cleaning efficacy testing for needleless IV connector. to ASTM-E-1837 Standard Test... View More

University Medical Researcher needs need Canada cytology laboratory for cell karyotype testing for research purposes. Please specify costs and how to... View More

Large chemical company needs biotechnology laboratory for Polymerase Chain Reaction (PCR) Testing for crop plants. Must be able to process single seed... View More

Electrical Laboratory needed for Diagnostic Medical X-Ray equipment testing: Insulation Resistance test before & after Humidity condition as per BIS ... View More

FDA GLP Europe preclinical contract research organization needed for GLP preclinical trial of biodegradable medical device .Animal trial with large a... View More

Medical Device manufacturer needs laboratory for accelerated shelf-life aging of medical products. 60 Samples. Laboratory must have oven with tempera... View More

Electrical laboratory needed for quality testing and certification of electromagnetic and ultrasonic insect/mosquito repellant technology. View More

Laboratory needed for medical cannabis testing including percentage of relevant cannabinoids and for presence of pesticides, mold spores. Company wish... View More

Medical device laboratory needed for chemical characterization testing of nylon surgical sutures for ISO1993 compliance. View More

Medical technology laboratory needed for ASTM Integrity Testing of balloon portion of enteral feeding devices as per ASTM F2528, Enteral Feeding Devic... View More

Technology company needs FDA certified laboratory for Product deformulation required of popular beverage in powder format. View More

California Medical Clinical needs bioanalytical laboratory for in-vitro testing for the duration of action of insulin. View More

Medical technology laboratory needed for catheter testing on intravenous catheter throughout the indicated therapy to check on thrombosis and flow rat... View More

Medical Device Manufacturer needs medical device laboratory for sterilization validation of device sterilization process.
1.¬ ¬Sterilization m... View More

Medical Technology / Biomedical laboratory needed for catheter testing: Embolic cube testing View More

Materials Laboratory needed for biomechanical / biophysical testing for medical device burs:
¬Mechanical force of d¬evices test (compress¬ion,... View More

Medical Device laboratory for identification testing for the detection of cutting oil (mobilmet 766) on dental implants View More

Medical Device Laboratory needed for transdermal patch testing of adhesive ingredients for milligrams of 5-HTP and Magnesium Oxide are contained with... View More

Toxicology Laboratory needed for toxicity tests and eco-toxicity testing of new molecule used in a Medical Disinfectant for new surfaces. These test... View More

Contract Medical Device Laboratory needed for FDA Testing of endotracheal tubes (ETT) to FDA recognized standards.

? ISO 5356-1 (2015), Anaestheti... View More

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Tem... View More

FDA GMP Medical Device Laboratory needed for biocompatibility testing of polypropylene mesh for medical use for a 510(k) application in accordance wi... View More

Packaging laboratory needed for ASTM transportation testing for the new medical device packaging box according to ASTM D4169-09 as per below: Pleas... View More

Pharmaceutical laboratory needed for comparison studies: efficacy testing of chemically-modified the structure of known pharmaceuticals that can test... View More

Medical Technology Laboratory needed for biomechanical testing of dental implants to ISO14801 - compression to failure and fatigue testing of dental i... View More

Toxicology laboratory needed for in-vitro cytotoxicity testing of medical product. Biological evaluation of medical devices -- Part 5: Tests for in vi... View More

Large research institute needs Medical Genetics laboratory needed for seedcongenic services and genotyping. Please specify the price per sample. View More

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Tem... View More

Medical Device company needs textile laboratory for laundering testing for patient slings to CAN/CGSB 4.2 Method 58

Looking for a quote. View More

FDA Medical Device Laboratory needed for Functional Tests for orthodontic metal medical device expander .
We're expecting to have a list and quote fo... View More

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More

PhD. University Researcher needs analytical chemistry laboratory for HPLC analysis of FLAVONOIDS, ALKALOID AND PHENOL GROUP from two plant extracts. ... View More

functional tests for an is an orthodontic medical device intended to be used for widening upper jaw. Could you please send us a proposal for testing t... View More

Biotechnology company needs genetics laboratory for DNA Testing by PCR analysis to determine if materials are of animal origin View More

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More

Medical Device CE Mark microbiology certification laboratory needed for CE certification testing of opthalmology multi purpose contact lens solution.... View More

ILAC Accredited medical device laboratory needed for ISO Testing of dental motors and instruments ISO 14457:2012, Dentistry -- Handpieces and motors View More

Medical Device firm needs laboratory for accelerated aging stability study upto 12 months for medical device View More

Medical Device Laboratory needed for Medical Device Testing to ASTM 640-12, Standard Test Methods for Determining Radiopacity for Medical Use View More

USA Microbiology Laboratory needed for Microbial Challenge and Disinfection Studies for needlefree medical device connectors; View More

INDIVIDUAL Medical doctor needs food laboratory for protein analysis of a commercial/consumer egg protein powder tested for accuracy of ingredients. View More

Medical Devices manufacturers of surgical instruments and implants in India needs microbiology laboratory of disinfectant viral efficacy testing of Na... View More

Laboratory Consultant needs Medical urine testing (red and white blood cells) for pain mgmt. View More