Need industrial waste and drinking water Testing or Scientific Research?
Save time and money searching by submitting a lab request.
Want access to our industrial waste and drinking water lab requests?
Create an AccountContract Laboratory has received the following industrial waste and drinking water Laboratory Requests which need to be fulfilled! These industrial waste and drinking water Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their industrial waste and drinking water Laboratory and Scientific Research. If you need a industrial waste and drinking water Laboratory, please Submit a industrial waste and drinking water Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Title:
Environmental Lab Wanted
Description:
Company wishes to purchase a laboratory for environmental testing, specifically soil and water analysis for agriculture in Canada.
Title:
SAE Strobe Lighting
Description:
Industrial Laboratory needed for the testing for strobe lighting used for emergency services to the following Test Methods SAE J595, SAE J845, CALIFORNIA table
Title:
ANSI Flashlight Testing
Description:
Performance Laboratory needed for ANSI testing of a flashlight to ANSI/PLATO FL1, Flashlight Performance Guidelines. We need light output levels tested, impact resistance tested, and water resistance (including)submersion tested. We need an IPX7 or IPX8 c...
Title:
Full Food Grade Testing
Description:
Food Analytical Chemistry Laboratory needed for full chemical analysis of limestone including heavy metals. Laboratory MUST be able to issue Food Grade Certificate, since this Limestone will be used in Water purification process.
Please inform us abo...
Title:
Integral Crystalline Water Proofing
Description:
Environmental Simulation Laboratory needed for complete concrete product testing by integral crystalline water proofing Tests like crystal growth through SEM or any other way, permeability, water reduction, strength etc.
Title:
ISO Saffron Testing
Description:
Food Laboratory needed for ISO microbiology and analytical testing of saffron to comply to ISO 3632 standard Spices -- Saffron (Crocus sativus L.). Parameters include:- Moisture and volatile matter
- Floral waste
- Extraneous matter (e.g. dust)
- Solu...
Title:
EPA Semi-Volatile Organics Testing
Description:
Third-Party Laboratory needed for EPA testing of several semi-volatile organics to EPA Method 625. Testing is needed for a chlorine dioxide generator for NSF 61 certification. This is for a chlorine dioxide generating system for water treatment. The semi...
Title:
NIOSH Industrial Hygiene Tests
Description:
URGENT / LONG-TERM TESTING Occupational Health Laboratory needed for a large volume of NIOSH Industrial Hygiene Tests on a long-term basis. The Tests are: NIOSH 5521, NIOSH 5006, Method TO13 Semi-volatile PUF sample; Method TO4 Pesticides PUF samples an...
Title:
Industrial Waste Ecotoxicity Studies
Description:
Environmental Toxicology needed for ecotoxicity studies of industrial waste as well as the composition of dangerous, hazardous substances in waste.including 1. Methyl acrylate, Cas No .: 96-33-32. Methyl methacrylates, Cas No .: 80-62-63. n-octylmercapta,...
Title:
Heavy Metals Analysis
Description:
Company needs forensics laboratory for industrial hygiene investigation for heavy metals in a specific garment and respirator filter f
Title:
Stress Relief Testing
Description:
Large Industrial Company needs Physical Laboratory for stress relief testing not exceeding 4% per 1000h at initial force making 70% of maximum force corresponding to ultimate tensile strength.
Title:
Contaminate Failure Analysis
Description:
URGENT Large Corporation needs Industrial Forensics Laboratory for failure analysis and identification of contaminate affecting composites part quality.
Title:
Degree of Polymerization
Description:
Polymer Laboratory needed for degree of polymerization testing of Alkyl polyglucoside surfactant. The product is soluble in water.
Title:
Lubricant DIN Testing
Description:
Materials Laboratory needed for DIN Testing to the following standards:
TEST NORM
DROPPING POINT DIN 51801, T. 2
DROPPING POINT DIN ISO 2176
BREAKING POINT (75 G/M²) DIN EN 12593
PENETRATION ...
Title:
Anchovies Testing
Description:
URGENT FDA Food Laboratory needed for seafood testing for anchovies including water activity, pH, water phase salt, histamine, and salmonella.
Title:
Physical and Chemical Properties Testing
Description:
LONG-TERM TESTING Healthcare Company needs Laboratory for physical and chemical properties testing of a variety of products including ointment, tinctures, oils, salves, creams, etc..The information and tests we are looking to be conducted are:
Ap...
Title:
PVC and XLPE Cable Mechanical Testing
Description:
Manufacturer needs Mechanical Laboratory for mechanical testing of PVC and XLPE (Cross linked polyethylene) cable includingTensile and elongation tests and water absorption tests
Title:
Drinking Water Virus Testing
Description:
Microbiology Laboratory for drinking water testing for the detection of viruses.
Title:
Water Organic Compounds
Description:
LONG-TERM TESTING Environmental Chemistry Laboratory needed for water analysis testing for determining the quantities of organic compounds.
Title:
Adhesive Stability Studies
Description:
Industrial Laboratory needed for Stability Studies on adhesive to determine the shelf life on three levels:preservative stability, adhesive bond stability, viscosity stablility
Title:
FDA Sunscreen Testing
Description:
FDA Certified Laboratory needed for sunscreen testing for Static(SPF), Water Resistance, UVA & UVB Broad Spectrum testing
Title:
Industrial Biocide Challenge and Leaching Studies
Description:
LONG-TERM TESTING Microbiology Laboratory needed for industrial biocides challenge and dry film tests (with and without leaching)
Title:
Failure Analysis of Automotive Part
Description:
Industrial Forensics Laboratory needed for failure analysis testing on automotive part for water contamination. Water is getting past the seals in the connector and is being wicked down the wires and corotating the ECU connector. We have tested the wickin...
Title:
Varnish / Lacquer Identification
Description:
Industrial Laboratory needed for determining the amount and kind of varnish / lacquer in a couple of wood products analyze to know exactly what kind of varnish/lacquer was used.
Title:
Gas Analysis / ASTM Hydrocarbons
Description:
Industrial Laboratory familiar with ASTM and ISO standards for measuring hydrocarbon samples needed for gas analysis to the API 617 datasheet which offers the standard composition format against which all centrifugal OEMs: As a reference, the template for...
Title:
Grease Testing
Description:
Industrial Laboratory needed for V2F rig testing for grease
Title:
Printing Materials Testing
Description:
Industrial Laboratory needed to provide quote for heavy metals testing in printing materials such as ink, paper, varnish, starch for
Cadmium (Cd)
Lead (Pb)
Mercury (Hg)
Hexavalent Chromium Cr (VI)
Polybrominated biphenyl (PBB)
Polybrominated diph...
Title:
ASTM and ASME Architectural Natural Stone Testing
Description:
Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the Natural Stone Institute's Dimension Stone Design Manual, VI.
MATERIAL SPECIFICATIONS
ASTM C629
Sta...
Title:
SAE Air Dryer Evaluation
Description:
Industrial Laboratory needed for TJ2384 SAE testing for 15 air dryers
Title:
ASTM Metals Thermal Conductivity Testing
Description:
LONG-TERM TESTING Industrial Laboratory needed for thermal conductivity testing by laser flash method for metals as per standard ASTM: E1461-13. Thermal conductivity and thermal diffusivity are the most important thermophysical material parameters for cha...
Title:
Crude Oil Physical Properties
Description:
Oil Laboratory needed for physical properties testing of crude oil including
1-Crude oil API & Specific gravity.
2-Crude oil salt content.
3-crude oil sulfur content.
4-crude oil Bs & W(i.e Basic sediments and water/ centrifugal.
5-crude oil vis...
Title:
BIS Compliance Vibration Testing
Description:
Industrial Laboratory needed for vibration testing required as per IS 11037 Electronic type fan regulators including Clause no 9.3.13.4:
Sweep frequency range 10 to 150HZ.
No of sweep cycle 5
Displacement amplitude 0.15mm.
The direction of vibratio...
Title:
Fragmentation of Carbohydrate Experiment
Description:
First, we have an large, exceedingly water-insoluble, 400 kd carbohydrate that first needs to be dissolved in superheated water. (We have preliminary data indicating 200 degrees C is more than sufficient.) Second, while still dissolved (in superheated w...
Title:
IEC Compliance of Lighting Protection System Evaluation
Description:
Industrial Laboratory required which can test earthing enhancing chemical compound as per IEC 62561-7 Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds
1) Leaching Test
2) Determination of Sulphur ...
Title:
Washer Fluid Boiling Range Determination
Description:
Industrial Laboratory needed for DIN testing of ethanol- and isopropyl alcohol-based washer fluids tested for boiling range according to DIN 53171 Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling...
Title:
Cannabis Testing
Description:
LONG-TERM TESTING Third-party Laboratory needed for analytical chemistry and microbiology testing of Industrial Hemp CBD product including: THC, Terepens, CBD, Heavy metals, pesticides, mold, VOC residual solvents, , mycotoxins, e.coli, salmonella and ba...
Title:
WHO Water Testing
Description:
Food Laboratory needed for WHO Drinking water testing.
Title:
Waterproofing Testing
Description:
Materials Laboratory needed for ASTM testing of EPDM rubber waterproofing membrane based on ASTM D4637(Type I) requirements
Title:
Water Analysis
Description:
LONG-TERM TESTING Company needs EPA environmental laboratory for water sample testing.
Title:
Biodegradability Testing
Description:
Chemical Manufacturer needs MPA Testing and OECD Biodegradability Testing of chemical as per OECD/ASTM D 2667-95(2008) Standard Test Method for Biodegradability of Alkylbenzene Sulfonates. MPA Testing is
basically product content water ,glycol , surfacta...
Title:
ASTM Metal Peel Test
Description:
Aerospace Company needs Industrial Laboratory for ASTM testing: metal to metal climbing drum peel test to ASTM D1781 Standard Test Method for Climbing Drum Peel for Adhesives
Title:
Soil Testing for Geological Survey
Description:
Environmental Laboratory needed for soil testing as part of a geological survey including the following tests.
1. Laboratory tests of determination of physical and mechanical proerties Parameter Specific gravity Bulk density Dry density Porosity Void ...
Title:
REACH Registration Testing
Description:
Laboratory needed for identification and quantification of Benzenesulfonic acid, C10-13-alkyl derivs, sodium salts CAS 68411-30-3; EC 270-115-0 for REACH registration purposes according to the following analytical methods:
1.GC-FID recommended publishe...
Title:
Cleavage Testing of Bonded Joints
Description:
Industrial Materials Laboratory needed for ASTM Cleavage testing of composite materials to ASTM D5041, Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints. Cleavage test, at ambient condition; and at 130 Deg F and 100% Rel...
Title:
The Effects of Moisture on 3D Printing
Description:
Polymer Laboratory needed for conducting study on how moisture can affect the 3D printing process and/or mechanical process of photo-active resins. Moisture/water can have a number of negative effects on certain resins polymerization.
Title:
Water Proofing Paint Testing
Description:
Large corporation needs Materials Laboratory for ASTM Solar Reflectance Testing of water proofing paint:
1) Solar reflectance index (SRI value) in accordance -with ASTM E1980-01
2) Degree of solar reflectance in accordance with ASTM E-891:
Title:
Shoe Water Resistance
Description:
Materials Laboratory needed for water resistance testing of waterproof boot and sock liner to EN 20811, Resistance to Water Penetration
Title:
Metallic Valve Testing
Description:
Industrial Laboratory needed for metallic value pressure testing to BS EN 12266-1:2012, P11(Annex A.3) and P12 (Annex A.4), Industrial valves. Testing of metallic valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
...
Title:
ASTM Abrasion Resistance
Description:
Industrial Materials Laboratory needed for ASTM Abrasion Resistance Testing to ASTM D4060-14;
Title:
Automotive powder coating Testing
Description:
Automotive Industrial Laboratory needed for physical testing of powder coated metal according Ford WSS-M2P190-A
Interior painted part of handbrake including
3.4.6 FLTM BN 107-01 Cure test
3.5 FLTM BN 155-01 Abrasion and paint wear resistance
3.4.9 FLT...
Title:
ISO Fishing Net Testing
Description:
Physical Laboratory needed for ISO Abrasion resistance and durability tests for Fishing nets as per ISO 1805:2006 Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002 and Fishing nets -- Determination of breaking force and knot br...
Title:
DER/FAA Aerospace Flame Test
Description:
Large corporation needs USA Industrial Laboratory with a DER/FAA certified Flame Chamber for Vertical Flame Test per 14 CFR § 25.853(a), Appendix F, part I (a)(1)(ii)
Title:
Automotive Lighting Systems
Description:
Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the development of company's own laboratory including design of facilities and purchase of equipment.
Title:
1-(2,6-dimethylphenoxy)-2-(3,4-dimethoxyphenylethylamino) propane Analysis
Description:
ISO 17025 Environmental Chemistry Laboratory needed for water testing for quantification of 1-(2,6-dimethylphenoxy)-2-(3,4-dimethoxyphenylethylamino)propane from a water sample. Unknown # of samples. Water is likely surface/ground water or industrial wa...
Title:
Offer request
Description:
Food Packaging Laboratory for food contact applications analysis and certificate of declaration of conformity for paperboard products according to the following International regulations:
Framework Regulation European Parliament and Council Regula...
Title:
Polythionate analysis from surface water
Description:
Environmental Laboratory needed for surface water testing for polythionates. No required reporting limits - best that can be achieved. There is no list for the specific polythionates so a total polythionate result would be OK.
Description:
LONG-TERM TESTING Environmental Laboratory needed for ground water testing for gross alpha, gross beta, Uranium 223 and 226. Some water samples are potable and some non-potable.
Title:
Biodegradability of Biomaterial Composites
Description:
Laboratory needed for ASTM seawater biodegradability testing of biomaterial composites to determine if the materials degrade in marine water to ASTM D6691 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Envi...
Description:
Construction Laboratory needed for testing and certification of flameproof building materials made from resin and recycled cardboard and/or paper including fire resistance, water resistance, density, impact resistance, thermal efficiency, flexural and com...
Description:
Specialty Chemical Manufacturer needs Analytical Chemistry Laboratory for OECD Testing including 1) Boiling point OECD 103 2) Vapor Pressure OECD 104 3) Surface Tension OECD 115 4) Partition Coeficient OECD117/107 5) Self Ignition temperature OECD 6) Wate...
Description:
Food Company needs Environmental Microbiology Laboratory for pathogen testing of of dairy cow wastewater following treatment with composting worms in a modified large scale worm bin with wood chips. There would be a total of 10 samples and what I need n...
Description:
URGENT Large Industrial Machinery Company needs Materials Laboratory for impact, failure analysis and identification of the cause of filtration liquid turning yellowish with use of white felt bags used for filtrating liquids We need to understand the caus...
Description:
University Scientific Researcher wants to purchase the following osteoblastic cell lines as well as antibiotics, culture medium, assay kits
1 MC3T3-E1 mouse osteoblastic cell line
2 C3H10T1/2 mouse osteoblastic cell line
3 DMEM medium
4 ?-MEM mediu...
Description:
Laboratory needs Contract Manufacturer to assemble kits for the NIH Taste Intensity Test which includes: gloves, 2 sterile cotton swabs, gloves (latex free), bottle of purified water, disposable cups, Quinine solution in small cups and salt solution in sm...
Description:
EPA certified laboratory needed for conducting experiments to support EPA certification of a sulfur dioxide grape fresh keep mat(it is a kind of paper release sulfur dioxide when it encounters water ),
Description:
Farm needs EPA GLP certified environmental laboratory for water testing twice a year for volatile organic compounds.
Description:
START-UP Outdoor wear company needs materials laboratory for breathability and waterproofness testing of new textiles materials used in rain pants. Testing used to support a change in materials. The current material is waterproof up to 20.000mm and bre...
Description:
Large Chemical Company needs USA based GLP Certified Laboratory for EU REACH testing to 7 OECD Guidelines including: OECD 102,Melting Point/ Melting Range
OECD 103, Boiling Point,
OECD 104, Vapour Point,
OECD 105; Water Solubility
OECD 107, Partition ...
Description:
EPA certified laboratory needed for conducting experiments to support EPA certification of a sulfur dioxide grape fresh keep mat(it is a kind of paper release sulfur dioxide when it encounters water ),
Description:
Electrical Laboratory needed for IEC testing of a linear accelerator according to IEC6060-2-1 & IEC60976 that use to radiotherapy and another produce 3d scanner waterphantom that use to QC of linear accelerator
Description:
Cosmetics manufacturer needs Clinical Research Laboratory for eye sensitivity testing of micellar water ( Makeup removal water) to determine it will not not cause an allergic reaction if contacted with the eyes.
Description:
URGENT Materials Laboratory needed for ASTM Testing of mineral and steam turbine oil to the following ASTM Standards:
ASTM D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
ASTM D2272 Stan...
Description:
LONG-TERM TESTING Food Laboratory needed for shelf-life stability testing for cooked meals in vacuum-sealed glass jars including pH, water activity, mold, aerobic plate count, listeria, salmonella, e-coli,staph.aureus
Description:
LONG-TERM TESTING Large hospitality company needs food microbiology laboratory laboratory for monthly environmental monitoring microbial analysis of food sample, hand swab, water, and equipment
Description:
URGENT Microbiology Laboratory needed for endotoxin testing on finished dialysate, dialysate concentrate, and/or purified water
Description:
Environmental Laboratory needed to identify residue which has accumulated inside a scrubber unit which is used to eliminate Hydrogen Sulfide gas in a wastewater treatment plant
Description:
Food Analytical Chemistry Laboratory needed for zinc content testing in wort (not water, unfermented beer). Preferred dose rate for zinc is 0.1-0.4 ppm in wort so is understandably tricky.
Description:
Large corporation needs laboratory for testing of lubricating oils for example: viscosity, ICP metals, KF Water, flash point, pour points etc..
Description:
Bioanalytical Laboratory needed for measuring total protein and turbidity of 60 samples cell culture media and water
Description:
Food Analytical Chemistry Laboratory needed for osmolarity testing on oil based and water based products intended for internal use
Description:
Environmental Engineering firm needs Environmental Analytical Chemistry Laboratory for testing for furfuryl alcohol (CAS 98-0-0) in soil, water, gas.NMR or 2505 RLs, PQLs,
Description:
LONG-TERM TESTING Pharmaceutical Microbiology Laboratory needed for Ph Eur and USP Microbiology Testing on pharmaceutical raw materials, finished products and water including TAMC, TYMC, Escherichia coli, salmonella
Description:
Analytical Chemistry Laboratory needed for MSDS or SDS analysis on a salt water/methanol solution.
Description:
Food Analytical Chemistry Laboratory needed for Shelf life testing for infused water beverage.
Description:
Pharmaceutical Analytical Chemistry Laboratory needed for conducting studies on the Active Pharmaceutical Ingredients APIs in an oil in water emulsion. We need to arrive at following conclusions by morphological/physical/chemical testing etc
1. Wh...
Description:
Large chemical company needs laboratory for OECD testing including; A1/OECD102 - Melting/Freezing Temperature
A2/OECD103 - Boiling Temperature
A6/OECD105 - Water Solubility
OECD 123 - Partition Coefficient Slow Stir Method (1 pH)
A4/OECD104 - Vapour P...
Description:
Industrial Laboratory needed for DIN Testing of Heat Shrink Sleeve as per DIN EN 12068 Stress Class C 60 UV
Description:
Laboratory needed for polymer testing to OECD guidelines to support regulatory submission including:
111 Hydrolysis as a Function of pH
117 Partition Coefficient (n-octanol/water), High Performance Liquid Chromatography (HPLC) Method
120 Solution/Ex...
Description:
LONG-TERM TESTING Microbiology Laboratory needed for MIC testing of pharmaceutical test articles with or without 5% Fetal Bovine Serum (FBS) with the following test organisms:
1. S.Aureus ATCC 29213
2. S. Aureus 33591
3. P. Aeruginosa ATCC 27853
4. ...
Description:
Product Design Company needs Automotive Laboratory for conducting an environmental simulation study on a custom vehicle cover prototype. Study involvespartially submerging the car (with the cover) in water up to 4 feet in depth. The process would include...
Description:
Food Manufacturer needs third-party laboratory for analysis of flour for water holding capacity,oil holding capacity, water activity, alpha amylase and lipase.
Description:
Engineering company needs Materials Laboratory for testing liquid product to ASTM and ANSI Test Standards: who tests ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile
And Dimension Stone Installation, ANSI 118.12 speci...
Description:
Environmental Toxicology Laboratory needed for Ecotoxicological tests on our adjuvant for registration purposes in Central America. This includes testing on 1. Fathead Minnows 2. Daphnid Water Fleas 3. Birds 4. Bees 5. Soil Microorganisms such as Algae
Description:
PRODUCT DEVELOPMENT Cosmetics Consumer Products Laboratory needed for new product development and formulation of baby wet wipes using minimal preservative with the following ingredients: pure water, silver dihydrogen citrate, sea water extract and irish m...
Description:
Pump manufacturer needs industrial laboratory for performance and life testing on submersible pumps.
Description:
Product safety laboratory needed for OECD skin corrosion and irritation testing by in vitro methods OECD TG431, TG430, TG435, ...Apart from liquid product, also solid products should be tested. By experience, we know that the absorptive properties of sil...
Description:
Materials laboratory needed for ANSI and ASTM testing of liquid membranes to ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile
And Dimension Stone Installation, ANSI 118.12, Crack Isolation Test and ASTM E96-00, Standa...
Description:
Laboratory needed for water treatment equipment testing to NSF/ANSI 419 testing of ultrafiltration membrane module
Description:
Preclinical Contract Research Organization needed for testing cell-permeable, water soluble peptide compound in the monkey model forage-related macular degeneration.
Description:
PRODUCT DEVELOPMENT Polymer laboratory needed for product development of hot glue product from photopolymer waste material
Description:
Cosmetics analytical chemistry laboratory needed for formulations investigation into a precipitate forming in a water-based liquid finished product. The precipitate is suspected to be inorganic as it will not dissolve in Methanol, Propanol, Hexane and Ch...
Description:
Microbiology laboratory needed for sanitation and cleaning efficacy testing for e. coli and other bacteria on collection of wine to ensure it is safe for human consumption after sanitation and cleaning. The collection was stored in cellar that were recent...
Description:
LONG-TERM TESTING Industrial facility requires weekly collection ATU-BOD (as O2) analysis from onsite 24hr composite sampler on final effleunt.
Description:
Environmental management company needs geology laboratory data related to quality of Garnet for industrial use. The project involves separation of the garnets form host rock to determine the type of garnet, it's content and hardness.
Description:
Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification of Agrochemicals & Pesticides, Basic & Industrial Chemicals, Dyes & Detergents, Lubricants & Greases, N...
Description:
Microbiology laboratory needed for performing Minimum Inhibitory Concentration (MIC) assay of the 7 antibiotics against bacteria: Chloramphenicol, Amoxicillin, Colistin, Doxycycline, Tiamulin Fumarate, Tylosin
Description:
Large industrial supplier needs plastics laboratory for roughness testing on rubber sheets.
Description:
University researcher needs environmental laboratory for groundwater testing for pharmaceuticals and concentrations.
Description:
Large corporation needs physical laboratory for failure analysis of injection molded waterproof housing submitted to a leak test, t. It has been observed that air bubbles are coming out at some locations that coincide with a knit line, there is a theory...
Description:
Materials laboratory needed for flammability of industrial, coated textiles to two BS Specifications including: BS 7837:1996,Specification for flammability performance for textiles used in the construction of marquees and similar textile structures BS ...
Description:
Environmental laboratory needed for ground water matrix testing including for Isotopes of Ra226, Ra 228, O18, H2, N15, O18, Sr87, Sr86, CFC11, CFC12, CFC113, SF6, H3, C14, C13, C12, Krypton-85, Delta S-32, Delta S-34, Noble gases In water, and Dissolved ...
Description:
Industrial Hygiene Laboratory needed for Vapour Monitor testing (Sampling Badge - 3M) for 30 samples.
Description:
URGENT Oil laboratory needed for water (PPM Wt.) content testing in Propylene which is an liquefied petroleum gas
Description:
Environmental toxicology laboratory needed for aquatic toxicology studies for OECD eco-friendly evaluation of engineering component washing media as per OECD, Guidelines for the Testing of Chemicals:
OECD 201, Freshwater Alga and Cyanobacteria, Growth...
Description:
URGENT Pharmaceutical company needs analytical chemistry laboratory for chromium analysis in acidified water samples that have been in contact with 316-grade stainless steel.
Description:
LONG-TERM TESTING Environmental chemistry laboratory needed for adsorbable organic halides AOX testing in wáter
Description:
Nanotechnology company need materials laboratory for ASTM rain repellency testing via a Bundesmann Water Repellency Tester
Description:
Mining company needs geotechnical laboratory for complete analysis of ore sample for their compounds and elements and their proportions. Analysis is to assess the precious metal, rare earth and complex compounds for industrial use.
Description:
Plastics laboratory needed for ASTM testing of plastic film and sheeting for water vapor using a modulated infrared sensor to ASTM F1249-13 test method for water vapor transmission rate.
Description:
Environmental laboratory needed for testing for coprostanol and estrogen in a water matrix.
Description:
Chemical company needs analytical chemistry laboratory for purity testing of industrial isopropyle alcohol
Description:
Medical device laboratory needed for cleaning validation study of the water cleaning cycle of a plastic covered electronic tracking device . Simulation of the a 150C temperature water cleaning cycle for 30 minutes over a 500 cycles tis needed to ensure t...
Description:
Analytical chemistry laboratory needed for analysis of cold pressed castor oil for the following parameters:
Saponification value (mgKOH/gm)
Water content/ moisture
Specific Gravity (25C)
Unsapofinable matter
Acid Value (mgKOH/gm)
Insolu...
Description:
Environmental toxicology laboratory needed for OECD testing to classify water soluble, anhydrous PAG lubricant hydraulic oil as Environmentally Acceptable Lubricants (EAL) according to 4 OECD standards: OECD 301F Ready Biodegradability
OECD 201 Freshwat...
Description:
Environmental analytical chemistry needed for biogas testing for the major gases (methane, carbon dioxide), hydrogen sulfide, and BTU determination of the biogas (anaerobic digester headspace gas). Siloxanes may be added to this requested analysis list.
Description:
Large engineering company needs radiochemistry laboratory to measure the radiological parameterst including Gross Alpha, Bg/L and Gross Beta, Bq/L in water.
Description:
Polymer laboratory needed for testing water vapors and oxygen gas permeability testing of new improvement in barrier of food packaging films made by blending two polymers.
Description:
Food laboratory needed for EC 1935 migration testing for food contact materials on a water pouring device made from copper
Description:
Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durability in accordance with the following standards:
-AC320 (an acceptance criteria from ICC)
-Condition...
Description:
Pharmaceutical company needs FDA GMP analytical chemistry laboratory needed for potable water and purified water testing by NMR (Nuclear Magnetic Resonance) and XRD (X-ray Diffraction).
Description:
Environmental laboratory needed for analysis of groundwater and soil for ethylene oxide, diethanolamine, and triethanolamine
Description:
Materials laboratory needed for testing waterproofing membrane for
1 - hydrostatic head resistance (an independent test) required values: 70m (231ft),
2 - wet/dry cycling (an independent test) required values: no effect @ 25 cycles at 231ft, and
3 - ...
Description:
Food laboratory needed to perform multiple microbiological, water, analytic chemistry, and environmental tests of different bakery products.
Description:
Materials laboratory needed for ASTM testing of newmarine coating to ASTM D4939 Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater and ASTM D5618 Measurement of Barnacle Adhesion Strength in Shear on materials
Description:
Large oil company needs laboratory needed for gas analysis to determine the water content in gas. Gas water content expected to be around 2-3,5 %vol. H2S - 2-4%Vol
Description:
Environmental toxicology laboratory needed for EPA 129 priority pollutants testing under the EPA Clean Water Act CWA.
Description:
Dermatology Contract Research Organization needed to conduct an in vivo study of the influence of prolonged application of mild water temperature on skin of animal subjects (swine). Method described in requirements.
Description:
University researcher needs food laboratory needed for water activity testing on mango muffins with custard filling.
Description:
URGENT TESTING Polymer laboratory needed for certificate of analysis COA testing required on three polymer products used in waste water treatment. Testing results needed by Saturday, June 24.
Description:
New distillery needs laboratory for stability testing of alcoholic beverages in aluminum cans for the integrity of the water-based polymer lining of the can
Description:
Consumer Products laboratory needed for SPF, UVA/UBA and water resistance testing of organic sunscreen product.
Description:
LONG-TERM TESTING Large pharmaceutical company needs analytical chemistry laboratory for weekly testing of four different compound lots: a water wash, a PBS wash, an IPA wash and a Hexane wash.
Water wash - Tetramethylendiamine, acrylic acid, polyethyle...
Description:
Environmental analytical chemistry laboratory needed for simultaneous HPLC analysis of multiple mixtures of anionic, cationic, nonionic, and amphoteric surfactants in environmental surface waters and effluents. HPLC with low ppm or ppb LOD required.
Description:
Building company needs construction materials laboratory for waterproof / resistance testing on windows.
Description:
Environmental laboratory needed for an EPA environmental baseline study (EBS) with analysis of the EPA Priority 16 polycyclic aromatic hydrocarbons (PAH) in open ocean seawater according to EPA 8270D Semivolatile Organic Compounds (SVOC) by GC/MS.
Description:
Analytical chemistry laboratory needed for testing of activated carbon powder for use in a water filtration system to NSF/ANSI 61 - Drinking Water System Components
Description:
LONG-TERM TESTING European environmental laboratory needed for water testing of greenhouse water supply used in the production of tomatoes. Testing for pH, EC, NH4, K, Na, Ca, Mg, NO3, Cl, S, HCO3, P, Si, Fe, Mn, Zn, B, Cu, and Mo.
Description:
FDA cGMP Medical device laboratory needed for product safety and toxicology study testing of water based personal lubricant including
1) Condom biocompatibility
2) Systemic toxicity
3) Vaginal irritation
4) Dermal sensitization
Description:
ISO 17025 certified analytical chemistry laboratory needed for OECD testing of phenol blocked polyisocyanate to the following OECD Guidelines for Chemicals:
OECD 107 - Partition Coefficient (n-octanol/water): Shake Flask Method
OECD 117 - Partition ...
Description:
Large corporation needs analytical chemistry laboratory needed for water testing to determine the National Aerospace Standard (NAS) value of their demineralized water.
Description:
University researcher needs environmental laboratory for water testing for the amount of Glyphosate in at least 9 water samples. Analysis is part of graduate research study on the effects of round-up on insect larvae and involves treatment of water at 3 d...
Description:
Laboratory needed for waterproof testing of medical alert device to International Electrotechnical Commission (IEC) IP code rating IPX6.
Description:
FDA GLP and EPA Industrial Hygiene laboratory needed for antimicrobial efficacy testing of a organo-silane antimicrobial agent against a variety of viruses including Norovirus, H1N1, Rotavirus and Ebola to demonstrate efficacy. The active antimicrobial i...
Description:
Chemical company needs toxicology laboratory for full REACH compliance testing of a variety of chemical products including detergents and water treatment products.
Description:
Industrial hygiene microbiology laboratory needed for NIOSH tuberculosis testing from an industrial hygiene sample by NIOSH Method 0900, Mycobacterium Tuberculosis, Airborne.
Description:
Food analytical chemistry laboratory needed for acidified food testing including water activity & acid VS testing for pepper and berry preserves.
Description:
Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensile strength, elongation at break, flexibility, electrical conductivity, adhesiveness, weathering testing,...
Description:
LONG-TERM TESTING Analytical food laboratory needed for USP and food chemicals code analysis of diatomaceous and purified siliceous earth products in conformance with US Food Chemicals Codex for conformance with US CFR Title 21 Chapter I Subchapter E Par...
Description:
URGENT TESTING Laboratory needed for corrosion testing of metals to ISO 6509 on faucet shanks. ISO 6509-2:2017 specifies assessment criteria and provides guidance related to the corrosion type dezincification for the selection of copper alloys with a mass...
Description:
URGENT TESTING: Large corporation needs industrial hygiene laboratory for equipment cleaning validation study testing using Texwipe TX751 to test for the antibiotic telafloxacin; 84 swabs (maximum allowed is 200mcg per sample); and Texwipe TX714K to test ...
Description:
Environmental microbiology laboratory needed for OECD biodegradability testing of industrial lubricants to OECD 301B Biodegradation Test CO2 Evolution
Description:
Pharmaceutical analytical chemistry laboratory needed to conduct water activity determination in a drug substance. Client is seeking to construct moisture sorption isotherms.
Description:
Environmental chemistry laboratory needed for water and sediment analysis for the following antibiotics by SPE:
1: Ampicillin
2: Sulfamethoxazole
3: Tetracycline
4: Trimethoprim
5: Ciprofloxacin
6: Erythromycin
...
Description:
Materials laboratory needed for expanded rubber testing studies to three DIN EN ISO Standards:
- Coefficient of thermal conductivity according DIN EN ISO 8497,
- Water vapor diffusion resistance factor according DIN EN ISO 12086
- Fire behavior accor...
Description:
Cosmetics clinical research laboratory needed for dermatology clinical study on 30 human volunteers including transepidermal water loss - TEWL (evaporimeter) tests and skin pH determination tests.
Description:
UK geology laboratory needed for clay testing for suitability for end uses as clay bricks, tiles, ceramics etc. Scope of testing to include:
Stage 1
An initial gradient firing on each borehole material (10 samples) to determine the firing temperatu...
Description:
START-UP Cottage food business needs food analytical chemistry laboratory for cake topping testing for test the pH and water activity (Aw) values of a sweetened condensed milk caramel-like topping.
Description:
Analytical chemistry laboratory needed for water testing for electrical conductivity, pH, total dissolved solids, total suspended solids, and trace minerals / pesticide / drug residues / impurities including potassium, sodium, magnesium, calcium, ammonium...
Description:
ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standard methods: OECD107 Partition Coefficient (n-octanol/water): shake flask method , OECD 117 Partition Coef...
Description:
Analytical chemistry laboratory needed for chemical properties testing of an alcohol-water solution: flash point, boiling point, specific density, flammability-upper, flammability-lower, and pH.
Description:
LONG-TERM TESTING Pharmaceutical analytical chemistry laboratory needed for raw vitamin and nutritional supplement materials purity & impurity testing by HPLC analysis for:
72-18-4, L-Valine;
3040-38-8, N-Acetyl-L-carnitine;
5785-44-4, Tricalcium Dicit...
Description:
Microbiology laboratory needed for USP purified water testing for TOC and microbial analysis
Description:
US FDA certified water laboratory needed for chemical and microbiological testing on potable and purified water.
Description:
ISO 17025 accredited industrial hygiene microbiology laboratory needed for BRC, USDA, FSMA bacterial contamination testing of an industrial food facility to comply with BRC, USDA, and FSMA standards.
Description:
Microbiology laboratory needed for water testing for mean dissolved oxygen difference (MDOD) in polyethylene tanks.
Description:
Consumer product laboratory needed for CPSC safety testing of an arts and crafts product constructed out of urethane, water based contact cement, hardboard, and paper.
Description:
Industrial chemical laboratory needed for XRD analysis of silica to determine if the sample is amorphous.
Description:
Polymers laboratory needed for thermal, dielectric, and insulating testing for properties of two components polyurethane resin according to the following standards:
Dielectric strength (50Hz -1mm) kV/mm - CEI 60243-1
Dielectric constant (100 Hz) -...
Description:
NIOSH laboratory needed for industrial hygiene testing: hazardous material surveys for asbestos, lead (Pb), tributyltin (TBT), poly-chlorinated biphenyls (PCB), and mercury. Please provide a quotation for asbestos sampling, screening, and analysis (by PLM...
Description:
Food analytical chemistry laboratory needed for alcohol content testing of pure (distilled) gin and confirmation of no additives post-distillation other than distilled water.
Description:
Physical laboratory needed for mechanical durability testing of industrial glass tubes.
Description:
Physical chemistry laboratory needed for OECD testing to OECD Test No.123 Partition Coefficient (1-Octanol/Water): slow-stirring method or shake flask method.
Description:
Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 61810 or 60255 standards
Description:
Food microbiology laboratory needed for viral testing of produce and water for norovirus and hepatitis A per ISO 17025.
Description:
Environmental toxicology laboratory needed for genotoxicity testing of water by allium assay.
Description:
Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.
Description:
Certified Analytical chemistry laboratory needed for testing for the amount of dissolved hydrogen gas in ionized water.
Description:
Pharmaceutical laboratory needed for Container and Closure System Integrity CCI testing and method development validation via dye ingress of a container containing water.
Description:
Environmental analytical laboratory needed for wastewater testing for AOX, EOX, and POX to European and American regulations
Description:
Bioanalytical laboratory needed for testing water samples to determine if they are DNAse, Protease and Nuclease free.
Description:
Pharmaceutical company needs Analytical Chemistry Laboratory needed for water vapor transmission testing for drug product.
Description:
LONG TERM. Industrial hygienic laboratory needed for vapor pressure testing of vacuum pump fluids.
Description:
Automotive laboratory needed for SAE J905 Sections 3 through 7 (Resistance to flow, contamination collection, release of contamination from filter into the system, collapse testing, affect of water in fuel on filter) testing on an in-line fuel filter.
Description:
Industrial laboratory needed for elastic modulus testing of a textile conveyor belt as per DIN EN ISO 9856.
Description:
Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additi...
Description:
Environmental analytical chemistry laboratory needed for wastewater testing: analysis of stearic acid and versatic acid from a wastewater sample
Description:
Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Description:
Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines:
- Purity (according to ASTM D6806)
- Acidity (according to AHRI 2008 Appendix C to 700-2014 Part ...
Description:
Environmental microbiology laboratory needed for water testing for bacterial identification of two different strains from a water source.
Description:
Industrial chemical laboratory needed for REACH compliance testing of p-phenylene diisocyanate focusing on physico-chemical, toxicology and eco-toxicology; tonnage band of 10-100 tonnes/year.
Description:
Environmental simulation laboratory needed for accelerated weathering testing of a mini-installation of a playground made from glued playground tiles. Weathering simulation should include water submersion to simulate outdoor exposure to weather.
Description:
LONG-TERM TESTING Packaging laboratory needed for oxygen transmission and water vapor testing (OTR and WVTR) for polyethylene terephthalate (PET) laminated film.
Description:
Food microbiology laboratory needed for microbiological standard plate count (SPC) testing and Coliforms testing per RAWMI standards: raw milk shall not contain zoonotic pathogens including: Salmonella spp., E. coli 0157:H7, Campylobacter spp., and Liste...
Description:
Large petroleum company needs Industrial chemistry laboratory for ASTM petrochemical testing to ASTM D8031-16 for acid number of terephthalic Acid (TA) by automatic potentiometric titration.
Description:
Environmental toxicology laboratory needed for testing for the presence of AOX, EOX, and POX in wastewater to meet EPA standards.
Description:
Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 Permeability
Coatings and Films
Materials laboratory for ASTM paint testing 1. ...
Description:
LONG TERM TESTING FDA cGMP microbiology laboratory needed for USP water testing of water for injection based on USP monograph for Sterile Water for Injection and the European Pharmacopeia (Ph. Eur.) monographs for Water for Injections in bulks and steril...
Description:
URGENT Environmental laboratory laboratory needed to perform microbiological induced corrosion (MIC) analysis on water.
Description:
URGENT. Radioactivity testing laboratory needed for analyzing samples of seawater with detection limits less than 0.1 Bq/L.
Description:
LONG TERM. Textile laboratory needed for testing water resistance of soft-shell garments according to apparel industry standards.
Description:
Clinical Laboratory needed for Trans-Epidermal Water Loss testing for small skin care line.
Description:
Research laboratory needed for optimization study on ozonators used for water treatment to define the optimal ozone amount for treatment of customer's water including chemical analysis of water to calculate how much ozone we need to decrease quantity of ...
Description:
Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & industrial fields. In business for over 20 years, existing customer base, all test equipment, manufacturer se...
Description:
Food microbiology laboratory needed for testing jam for pH levels, water activity, and presence of bacteria.
Description:
Radioactivity laboratory needed for testing samples of seawater with detection limits less than 0.1 Bq/L.
Description:
Food laboratory needed for CODEX testing of iodate and iodine from industrial salt via CODEX STAN 150-1985 methods.
Description:
EPA environmental toxicology laboratory needed for acute toxicology testing/ EPA PRIA Action Code #A532 for antimicrobial pesticide registration of a product, which is an Oil/Water emulsion.
Description:
EPA environmental toicology laboratory needed for acute toxicology testing/ EPA PRIA Action Code #A532 for antimicrobial pesticide registration of a product, which is an Oil/Water emulsion.
Description:
Agriculture Laboratory needed for AOX analysis and pesticides in food and environment
Description:
Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7
2. Liquid water permeability: Test method EN-1062-7
3. Acid Resistance . 4. SRI (solar reflective index) ASTM C 1549-04
5. Chloride Ion penetration ASTM C 1202 -97
...
Description:
Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm for at least stacking compression test + shock + vibration)
Description:
Oil laboratory needed for hydrocarbon testing: surfactant/solvent formulation diluted in water at various concentrations to determine the surface tension as well as solvency of hydrocarbons - petroleum oil.
Description:
Microbiology Laboratory needed for microbiological testing of pharmaceutical media (air, water), medicinal products, herbal medicinal products and substances for pharmaceutical use according to European Pharmacopoeia, cGMP, Cosmetic Regulation, Food Regul...
Description:
Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance
Description:
Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, Ghost, Halo (ISO 9358-1994), Lateral Chromatic Aberration, Longitudinal Chromatic Aberration and Reflecti...
Description:
Laboratory needed for Transmittance Test for UTMB Hospital waste water UV light used for sterilization
Description:
University researcher in India needs chemical/environmental laboratory to test water samples and waste water for Triclosan.
Description:
Microbiology Laboratory needed for disinfectant efficacy testing of 3 different products to BS EN 1276:2009- Chemical disinfectants and antiseptics ?Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and ant...
Description:
Electroplating company needs Industrial Hygiene Laboratory Air Quality measurement for plant in Asia
Description:
Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, ...
Description:
Long term need for a toxicology laboratory in India to test urine samples for benzene. Industrial facility needs occupational hazardous materials evaluation to determine effectiveness of protective measures used by employees.
Description:
Building Supply company needs laboratory to test thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH per BS EN 13468 test for...
Description:
Healthcare facility needs Clinical laboratory for urine/blood testing for the biological indices of industrial chemicals. Please specify the cost.
Description:
Consumer Products Laboratory needed for rain jacket testing for water proofness + breathability
Description:
Ongoing test request for tea in China: 10 blends need tested for: Humidity(100-105°C),Total ash, Insoluble catechins, HCl, Ash soluble in water, total ash, Aqueous extract, Caffeine, Tannin, Crude fiber, Antimony, Sn, F, Ag, Pb,Zn, Stems and petioles.H,...
Description:
University needs industrial hygiene laboratory for solid waste management worker monitoring testing: Hair and nail samples for: HEAVY METALS (LIKE MERCURY, CADMIUM, ARSENIC. CHROMIUM LEAD)
Description:
FDA GLP Bioanalytical Laboratory needed for GLP Small Molecule Study for Molecular Level Study and Extinction coefficient for a small molecule in MeOH and water
Description:
Pharmaceutical Laboratory needed for sterilie water for injection testing for estimation of Aluminum content by Fluorescence spectroscopy or Inductively Coupled Plasma Atomic Emission Spectroscopy. Limit is not more than 10 ppb
Description:
ISO 17025 Laboratory needed for E-liquids testing for: nicotine, diacetyls, acetyl propionyl, formaldehyde, Propylene Glycol, pH, water
Description:
Large Industrial Bioscience Company needs pre-clinical contract research organization genotoxicology studies on substance including Ames and Chromosomal aberration studies.
Description:
Environmental Products Company needs Analytical Chemistry Laboratory for Analysis of Xanthates from surface water
Description:
Pharmaceutical company needs Analytical Chemistry Laboratory for sterile water testing by fluorescence spectrophotometry for Aluminum content in sterile water for injections
Description:
weathering test following TSM0501G with Suga machine model : WEL-SUN-HCH type sunshine Weather-O- meter for the following: 1 Discharge voltage ( V) Range 48 to 52 Mean 50+ 2% Discharge current ( A) Range 58 to 62 Mean 60+ 2% Cycle Continuous radiation Bl...
Description:
FDA cGMP pharmaceutical Laboratory needed for viscosity testing: Magnesium Aluminium silicate. Sample solution: After determining the Loss on Drying, weigh a quantity of Magnesium Aluminum Silicate, equivalent to 25.0 g on the dried basis. Over a perio...
Description:
Consumer Products Cosmetics Laboratory needed for reformulation of water-based nail polish for kids.
Description:
Industrial Third-Party ISO 17025 Laboratory needed for IEEE, ANSI and UL Testing of 9 cables flammability and toxicity testing: FT4/IEE1202 flame propagation test and ANSI/UL1685 smoke release test, and BSS7239 toxicity test, please let me know the cable...
Description:
Cosmetic Testing Needed : Need research to formulate an ingredients list. The ingredients would need to be mostly organic. The purpose would be to combine gel like forming powders(including an oil for fragrance) into a fine powder. Then by mixing the powd...
Description:
Environmental laboratory needed for surface water testing of 4 acre lake displaying a very small diesel oil pollution bloom from run off surface water in the vicinity. Need lake water tested before stocking it with expensive carp.
Description:
Environmental laboratory needed for Facility Stormwater testing.
Description:
Laboratory needed for fluid and water testing of fluid and water used for new-technology fog making machines.
Description:
Physical Laboratory needed for FDA Testing of new portable water filtration device with ceramic filter ,ion exchange resin , carbon fiber , nano cluster media
Description:
Microbiology laboratory needed for Biodegradebility testing of Plastic Drinking Straws,
Description:
Food Labratory needed to test the water activity of jerky samples
Description:
Laboratory needed for multiple testing on tape product
AAMA 713
AAMA 711
AATCC 127
ASTM D412 ? Tensile Strength
ASTM D 1970 Water Penetration
ASTM D 3300 Adhesion and accelerated aging (multiple Tests)
ASTM E331
For Exterior breather membrane :...
Description:
Environmental Laboratory needed to perform several analyses on well water samples. There are 64 samples and each one will need to be analyzed for:1) Isotope analysis of: Sr, O, H, S and C2) Dissolved Gasses: O2 and H2S3) Heavy metals (in concentrations of...
Description:
Laboratory needed for hazardous waste testing: Tar Fuel burn test for total nitrogen
Description:
Large company needs aquatic toxicology laboratory for Ecotoxicity study testing
1. OPPTS 850.1075 Fish Acute Toxicity Test, Freshwater and Marine
2. OPPTS 850.1010 Aquatic Invertebrate Acute Toxicity Test, Freshwater Daphnids
3. OPPTS 850.4500 Algal To...
Description:
Electrical laboratory needed for protoype testing: potable water testing of energy consumption and water delta, flow rates and energy of volts, amps and wattage temperatures on a 2 stage prototype of 1 gallon and 4 gallons = 5 gallons total
Description:
Analytical Chemistry Laboratory needed for transfering oil testing:
Dielectric loss (90 ?)
Breakdown voltage
Water content
Gas chromatography
Description:
Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:
1. Temperature & latitude test as per DO 160 Section 4 Category -B3.
2. Temperature Variation test as p...
Description:
Pharmaceutical packaging laboratory needed for USP water transmission testing on blister packs
Description:
Enviornmental Laboratory accredited in Tennessee needed for water testing.
Description:
Electrical laboratory needed for DIN Testing of a group of sensors as per DIN 40050-9 (IPX9K), Road vehicles; degrees of protection (IP-code); protection against foreign objects; water and contact; electrical equipment for a group of sensors.
Description:
FDA GMP cosmetics laboratory needed for formulation of lotion using 100 present natural materials ingredients: ghee (clarified butter) water, rose water for smell, and Indian Jasmine essential oil.
Description:
Geotechnical laboratory needed for physical properties of different slurries, solids and liquid:
Color
Solid Concentration (TSS+TDS)
Heat of Formation
Specific Gravity
Specific Heat Capacity
Viscosity
Heat of Vaporization
Thermal Conductivity
Sur...
Description:
Laboratory needed for formulation of water based pesticide and mosquito repellent using essential oils (e.g Citronella oil, Geranium oil) for use in device dispensor
Description:
Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cables on tensile performance, abrasion resistance, crush, impact, bending, kink, temperature cycling, water p...
Description:
Laboratory needed for ASTM Testing of aggregates used in oil pipeline operations to the following standards ASTM:Cement:ASTM C150 ? Standard specification for Portland cement Aggregates:ASTM ?294, ?295 - Standard Guide for Petrographic Examination of Agg...
Description:
Laboratory needed for study on the compatibility of slotted HDPE pipe (for horizontal wells) through a groundwater contaminant plume over time and with variable temperature while injecting steam. The product is multi-phased, consisting of jet fuel, trich...
Description:
LONG-TERM TESTING Packaging Laboratory needed for packaging testing of In flexible packing materials like double laminated , triple laminated & other flexible packaging material for:
Flex crush resistance
Water vapor transmission rate
Oxygen transmis...
Description:
Food laboratory needed for saffron testing to iso 3632-2 standard, Spices -- Saffron (Crocus sativus L.) -- Part 2: Test methods including for crocina (kleur) (fotometrisch met fotospectrometer van 80 tot 190 en meer)
picrocrocin (smaa...
Description:
Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal temperature and water immersion *Determination of tensile adhesion strength - C
*Determination of open t...
Description:
Industrial Hygiene Laboratory needed for swabbing and environmental monitoring testing for medical office
Description:
Physical Laboratory needed for ASTM Flammability testing of water based primer formulation for confirmation that product it is rated 0 in NFPA 704 standard to ASTM D 6668 (according to NFPA 704 requirement)
Description:
Southern California pharmaceutical analytical chemistry laboratory needed for USP Methyl Sulfonyl Methane (MSM) raw material assay testing and water content testing.
Description:
Independent laboratory needed for LED comparison study of 4 manufacturer's underwater LED light components to evaluate
Quality of construction ?
Quality of LED components ?
Quality of LED Drivers ?
Color Temperature output from each ?
Lumens o...
Description:
Materials laboratory needed for DIN and ASTM Testing of thermal insulations foam board. Testing to To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Wat...
Description:
Laboratory needed for dietary supplement shelf life testing for expiration date on bottles that contains thiamine HCL , magnesium rice chelate oxide , L-Taurine , Feverfew herb , rice flour, capsule (hypromellose, purified water).
Description:
Consumer Products performance laboratory needed for waterproof testing for clothing. MIL SPECs or other standard industry tests.
Description:
Laboratory needed for Environmental Monitoring Testing for Class 8 Cleanrooms in a Non-sterile Pharma/Med Device Manufacturing Facility.
Current testing Includes: Viable Air Counts, Surface Monitoring, Water testing, Personnel Testing (glove and wrist) ...
Description:
Environmental Microbiology Laboratory needed for algae MIC testing on blend of two biocidal compounds (both are fairly water insoluble powders). The MIC testing has to be conducted on two species of algae. Plenty of labs can run the tests on bacteria an...
Description:
Mechanical Test Center needed to run the test study on industrial springs used in suspension cars (cyclic test, corrosion, etc.).
Description:
Packaging laboratory needed for bottles and caps testing for bottled water.
Description:
Analytical chemistry laboratory needed for Glassware Inhibitory residue test -on powdered hand wash laboratory glassware detergent. test needs to be performed according to the procedure described in ?Standard Methods for the Examination of Water and Waste...
Description:
India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial waste.
Description:
ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 for the 120 Day Accelerated Water Treeing Test followed by test protocol to include Electrical Measurements...
Description:
Canada Food Laboratory needed for drinking water testing after UV processing. Testing for iron ppm, hardness gpg, turbidity ppm, manganese ppm, tannis ppm and UV Transmittance..
Description:
Europe laboratories needed for electronic waste testing to determine metal content (Cu, Au, Ag, Pd, etc) in diverse electronical wastes eg. printed circuit boards - PCB, copper content in PCB frames, etc. based on samples of 3-4 kg.
Description:
UL, ETL, or NRTL recognized laboratory needed for certification testing of Domestic Storage Water Heaters (3 models) for export in US & Canada market to IEC 60335-2-21 standard. Models have difference is in the water tank capacity and rated wattage of th...
Description:
Accredited UK laboratory needed for construction building products testing of flexible sheets for waterproofing to BS EN 12691, Determination of resistance to impact
BS EN 12730. Determination of resistance to static loading and
EN 1847
for building...
Description:
Industrial cleaning equipment company needs virology laboratory for Virucidal efficacy testing on Avian influenza virus (AIV),, H7N1Noroviruses, Adenovirus & Polivirus
Have to test efficacy of electrolyzed water or Hypochlorous Acid solution (ph 6.5-7...
Description:
Analytical chemistry laboratory needed to determine the monomers and their % in a zinc crosslinked acrylic water based emulsion and the monomers emulsifier % and the % of chain transfer agent.
Description:
Georgia laboratory needed for organic waste stream testinf for relative volumes and BOD of the following organic constituents in a supplied sample of organic waste stream? Celluloses, Starches, Triglycerides, Free Fatty Acids, Volatile Fatty Acids, Sacch...
Description:
Europe laboratory needed for wastewater testing: five analyses requested:
1. BOD
2. TSS
3. Fecal Coliform
4. pH
5. Total chlorine
Description:
LONG-TERM TESTING: ISO 17025 Environmental Microbiology Laboratory needed for Testing, Water Quality Testing, Water Portability testing, 740 samples.
Description:
Environmental analytical chemistry laboratory needed for water analysis for Dissolved Zirconium analysis of water samples. 20 samples field filtered to 0.45 microns
Description:
Petroleum laboratory needed for Texas Department of Transportation Testing to Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS - Test for water content, % by mass.
Description:
Materials laboratory needed for ASTM Chemical degradation and permeation testing as per ASTM 739-12 for Industrial rubber gloves for 84 chemicals
Description:
Flooring Company needs Performance Laboratory for water resistance testing of Cement self leveling products.Product is a topical sealant to apply to some of our cement based self leveling products.
Description:
Chemical company needs Analytical Chemistry Laboratory needed for boiling point testing on a sample of anhydrous ammonia/water solution.
Description:
GMP / GLP Toxicology Laboratory needed for Evaluation of the systemic in vivo toxicology of water soluble nanoparticles and determination of LD50 by IV administration in mice or rats
Description:
Pharma needs pharmaceutical analytical chemistry laboratory for USP Testing for Detection of water in acetone using GC-TCD as per USP method
Description:
Analytical Chemistry Laboratory needed for water testing for salts.
Description:
Materials laboratory needed for polyol characterization testing:
Hydroxyl number, mg KOH/gm ASTM D1638 or ASTM D 4274
Primary Hydroxyl Content ASTM D 4273
Water, weight % maximum ASTM...
Description:
Materials laboratory needed for ASTM Dielectric Testing: Dielectric Strength and Water Absorption (RT 24h) to ASTM D149, Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid. The material is 30% glass filled Peek.
Wha...
Description:
EnvironmentalLaboratory needed for OECD Testing of Sewage Treatment Water to OECD 303 for zinc phytate
Simulation Test - Aerobic Sewage Treatment -- A: Activated Sludge Units; B: Biofilms
(TSG requirement)
This Test Guideline describes two simulations...
Description:
Middle East Proficiency Laboratory needed for ACi, ASTM construction materials proficiency testing for soil, aggregate, concrete, bitumen, water and for
Description:
Materials laboratory needed for paints testing for accelerated aging, hiding power, the spatter resistance, the scrub resistance, the washability, the sag resistance, the blocking resistance, the hiding change, the heat gain, the viscosity, the whiteness...
Description:
Materials laboratory needed for ASTM or IEC Dielectric Constant Testing for Quench Water, Gasoline, Steam Condensate, Hydrocarbon, and other refineries/petrochemical product.
Description:
LONG-TERM TESTING Ontario Accredited Environmental Laboratory needed for groundwater testing : ethane analysis
Description:
LONG-TERM TESTING Food laboratory needed for ingredient testing of fruit product: Water - 450ml, Orange - 8 grams, Lemon - 7 grams, Lime - 6 grams, Strawberry - 18 grams, Cucumber - 12 grams, Mint - 0 grams (3 leaves)
Description:
Industrial Hygiene consulting firm needs laboratory that will do analysis for propylene glycol dinitrate
Description:
Environmental analytical chemistry laboratory needed for surface water testing for antibiotics in surface water for samples from India. Please provide holding time and cost.
Description:
Microbiology laboratory needed for microbiological testing of production facility including water testing and air testing of various areas around production lineincluding plastic closures, preforms and conveyors.. Microbiology testing to include mold/yea...
Description:
LONG-TERM TESTING Food laboratory needed for glycerin and 190 proof Grain Ethanol Testing for to verification of a suppliers Certificate of Analysis to following specifications:
Organic Vegetable Glycerin
Assay: greater than or equal to 99% glycerin...
Description:
Nutritional supplement company needs analytical chemistry laboratory needed for comparison study on sugar levels of coconut water powder (sugar content) and find the equivalency
Description:
ISO 17025 certified laboratory needed to conduct osmolality tests that report the results in mOsm/kg water units for a sample
Description:
Materials laboratory needed for paints testing for accelerated aging, hiding power, the spatter resistance, the scrub resistance, the washability, the sag resistance, the blocking resistance, the hiding change, the heat gain, the viscosity, the whiteness...
Description:
Medical Device Manufacturer needs medical device laboratory for sterilization validation of device sterilization process.
1.¬ ¬Sterilization method: ¬ We will supply instr¬uctions for a method ¬with step by step ins-tructions and we need¬ to get t...
Description:
University researcher in Plant Protection needs agriculture laboratory for water testing of water samples used for agricultural irrigation. Please provide quotation for the respective analyzesand duration of the analysis as well as the procedures for subm...
Description:
FDA cGMP Pharmaceutical analytical chemistry laboratory needed for identity testing for the following drug and excipient materials that may be used in production of clinical grade biological drug products:
Pluronic F-68
1X Phosphate Buffer Saline
L-Gl...
Description:
Exporter of rubber,plastic bathroom accessories needs physical laboratory for physical testing including prformance and biodegradability:
1 Tensile strength ISO 527 1
2 Elongation
3 Tear strength
4 Density / sp. gravity
...
Description:
Materials laboratory needed to measure the solar reflectance index (SRI) test on a water based thermal coating . Please provide location of testing, the sample qty required, and cost per sample
Description:
Consumer Products laboratory needed for performance testing of horse boot inner liner material for heat and water evaporation in comparison to industry standard materials.
Description:
OECD GLP Environmental Toxicology Laboratory needed for Toxicology Testing Acute Oral Toxicity, AMES Test, Skin Corrosion, Skin Sensitization, In Vitro Mammalian Chromosomal Aberration Test (if AMES shows positive), In Vivo Mammalian Gene Mutation Test (i...
Description:
EPA Microbiology Laboratory needed for EPA microbiology testing. We are looking for EPA testing for heterotrophic plate counts, E. coli and Enterococci (preferably using IDEXX kits), and Vibrio cholerae testing. Samples would be collected from ship balla...
Description:
Materials Laboratory needed for Testing for plastics testing of LDPE / HDPE plastic bags:
1. Oxygen Transmission Rate (OTR)
2. Water Vapor Trasmission Rate (WVTR)
Description:
Laboratory needed for testingcompostable products disposable food service products made from sugarcane fiber pulp. The following Tests will be used for further product certifications:
- EN13432
- ASTM D6400
- Water Resistance/proof
- Heat Resist...
Description:
Europe company needs microbiology laboratory for EN norm Efficacy testing of algaecide for application to water systems, such as swimming pools & spas
Description:
Small volume parenteral manufacturing plant needs product safety laboratory for toxicology testing, and interaction study (Migration study and Sorption study ) for sterile water for injection, sodium
chloride injection, dextrose injection for parentera...
Description:
Microbiology Laboratory needed for ASTM bacteria resistance testing on a lubricant according to ASTM E2275, Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance.
Description:
Third-party laboratory needed for biodegradability testing of plastic fishing baits for fishing potentially to ASTM D6691Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Co...
Description:
Large organization needs laboratory for conducting testing on contaminated mining waste testing for acid generation potential.
Description:
Nutraceutical Laboratory needed for stability testing for vitamin packet to be sold in new water formulation. Company is in process of getting product into large chain store and needs stability testing.
Description:
Certification Laboratory needed for performance testing of waterproof pocket for swimwear and would like to test it for water inflation when submersed in water not deeper that 100 ft.
Description:
Laboratory needed for validation testing projects on Locomotive Radiators and CACs.
1. Thermal Cycling:
Full size radiator testing, which is approximately 1000 Kg. Low and high temperature water will be required at 98 degree C and at 4 degree C. Air ...
Description:
Laboratory needed for Deep Freezer and Ice Lined Refrigerator Testing to WHO / PQS standards:
WHO/PQS/E03/FZ01-VP.2, Refrigerators and freezers for storing vaccines and freezing water-packs for Deep Freezers &
WHO/PQS/E03/RF03-VP.2 for Ice Lined Refri...
Description:
Environmental laboratory needed for insecticide residual analysis on soil, water and cabbage leaves. Please provide the price/quotation and duration of the analysis .
Description:
Consumer Products laboratory with experience in nylon fabrics needed for integrity testing of waterproof nylon handbags.for comparison between two fabrics including failure analysis of peeling of fabric.
Description:
Healthcare practioner needs medicinal chemistry laboratory for herbal waters testing for chemical composition including for vitamins, minerals. Herbal waters have been extracted from plant materials via freeze drying
Description:
India conglomerate needs industrial hygience laboratory to conduct air & water quality testfrom 4 different places. Air samples to be collected and one water sample for testing. Please give quotation for the same.
Description:
Food analytical chemistry laboratory needed to test acetaldehyde (AA) on plastic (PET) preforms & bottled drinking water..
Description:
ENvironmental laboratory needed for waste oil , soil and water testing for Radium 226/228 & other Gamma Emitters EPA 901.1 modified Waste and Oil Samples 40 samples,
Fluorescent or High Intensity Discharge Lamp Preparation ANSI/NEMA: C78.LL 1256-2003/C7...
Description:
URGENT Materials Laboratory needed for batch release testing: Dynamic Surface Tension testing on a water-based inkjet ink.
Description:
Robotics Laboratory needed for development and evaluation studies of robotic equipment to ISO/TR 13309:1995 Manipulating industrial robots -- Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accord...
Description:
LONG TERM TESTING Analytical Chemistry Laboratory needed for periodically quality control testing silica gel prior to procurement of large quantities to strict quality standards.
Material : SILICAL ? SORBEAD ?R?
Parameters:
1. Chemical composition
2....
Description:
Environmental Analytical chemistry laboratory needed for wastewater testing for Adsorbable Organic Halogens, AOX in waste wáter,
Description:
Geology laboratory needed for Marble Analysis:
Caco3, Fe2O3, SiO2, Al2O3, MgO, MnO, Ph Value, Under 105 Degree Centigrade volatile Matter, HCL Insoluble Matter, Water Absorption, Brightness, Specific Gravity, Density.
Please provide estimation & Time Ta...
Description:
Consumer products company needed for personal lubricant testing to analyze ingredients in two of personal lubricants for:
Water
Sorbitol
Glycerin
Hydroxyethlcellulose
Sodium Benzoate
Potassium Sorbate
Lactic Acid
Please provide quote and lead ...
Description:
LONG-TERM TESTING Asia Cosmetics Microbiology Laboratory needed for providing an annual quote for microbiological analysis in water and cosmetic grade pigment powder every 3 months.
1) Bioburden %
2) Microbiological safety Index.
3) Detection of ...
Description:
Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids....
Description:
URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongatio...
Description:
Shipping vessel owner needs Spain laboratory for bunkered fuel analysis
?Asphaltenes, Ash, Carbon Residue
?Density, Flashpoint
?Sulfur Content, Hydrogen Sulfide
?Microbes Contamination
?Pour Point, Stability
?Total Sediment Potential (TSP)
?V...
Description:
University researcher needs environmental laboratory for soil analysis and water microbial analysis
1) soil physical particle size distribution test
chemical, total carbon, minerals testing
microbiological total fungal, bacterial and eartthworm analy...
Description:
Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids....
Description:
EPA Environmental laboratory needed for bench-scale testing of a client?s wastewater treatment procedure. Client runs a metals finishing operation where they apply a chromate conversion coating to aluminum. Their wastewater is high in hexavalent chromiu...
Description:
Large company needs laboratory for water testing for purity
Description:
Materials laboratory needed for ASTM and Lubrizol Testing for Test cloud point of water soluble ethoxylated product. Cloud point of a liquid detergent formulation to ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure
Description:
Geophysical laboratory needed to make geophysical measurements on 1-5 soil cores, each comprised of multiple test samples. The desired measurements include Compressional (P) and shear (S) wave seismic velocity, Electrical conductivity/resistivity, Dielect...
Description:
Media company needed for nuclear particle analysis for ocean water from a Santa Monica beach.
Description:
Laboratory needed for Spirits testing Determination of addition of alcohols or sugars from cane, corn or sorghum liquor from grape, apple or pear by isotope ratio of Carbon 13 - Test Method. Determination of the origin of CO2 in carbonated soft drinks by...
Description:
FDA GMP Independent laboratory needed for testing
1. Detergent testing for GMP cleaning of vessels that produce cosmetic products.
2. Defoamer testing for the rinse water.
Description:
Environmental laboratory needed for USEPA potable and non-potable water testing to USEPA method 522 for potable and non-potable water. 1-4 dioxane
Description:
INDIVIDUAL Environmental laboratory needed for Soil plutration testing for soil design project to check the neuter of soil for the water plutration through the soil with all calculations
8000 sqf. In addition, the soil report was finshed and the found...
Description:
Pharma company looking for FLorida GMP microbiology contract laboratory to test water samples under cGMP regulation,perform growth promotion and TOC analysis
Description:
Analytical chemistry laboratory needed for phthalates testing in bottled drinking water at different temperatures
Description:
North Carolina Certified Laboratory for wastewater testing for the analysis of Decahydronaphthalene Analysis under methodology, EPA 624, or other applicable method.
Description:
Africa Agriculture Bioanalytical Laboratory needed for Proteomics analysis on tomato leaf and fruit subjected to two water treatments.
Description:
Mining company engaged in the exploration of mineral deposits, mining of tantalum, industrial minerals and fashioning of gemstones needs geology laboratory for Chromium (chromite) testing of mineral deposits.
Description:
Food analytical chemistry labroatory needed for water activity testing in shelf stable snack items
Description:
Petroleum company needs NABL Accredited Laboratory for grease testing as per Indian Standards IS 507 : 1993 Grade 2 (https://law.resource.org/pub/in/bis/S11/is.507.1993.pdf) : 1. Glycerine content, percent by mass, MAX 2. Low temperature pumping properti...
Description:
UK cosmetics laboratory needed for full quality control testing and analyses needed for the soap industry including all raw materials (oil, water...) and finished products to to assure that the soap production is controlled and meet the EU standards and ...
Description:
Asia laboratory needed for drinking water testing prior to distributing to government authorities.
Description:
India Materials laboratory needed for polymer testing of free monomers in polymers. Free monomers 1: Acrylic acid 2: sodium hydro sulfite in a product Having 75% Water & 25% Salt of 2 propenoic acid telomere with sodium hedrogen sulfite
Description:
Mechanical Laboratory needed for industrial spring testing: KLT tests (Key Life Tests) for transportation springs according to company specified operations for performance as per our document. We look forward to hear your feedback.
Description:
Industrial Engineering firm needs performance laboratory accelerated aging process and adhesive strength study testing. The two products bonded together are fabric backed sandpaper and a plastic, 1/2 diameter cylinder. We are testing several different ...
Description:
Pharma company looking for FLorida GMP microbiology contract laboratory to test water samples under cGMP regulation,perform growth promotion and TOC analysis
Description:
Pharma company looking for microbiology contract laboratory for water testing to test water samples and perform growth promotion.
Description:
Microbiology Laboratory needed to Identify Fungi & Bacteria in 1/2 ounce specimen Jars Some in water others dry
Please provide cost
Description:
FDA GMP Food Laboratory needed for food contact surface testing of NSF61 approved coating for potable water tanks, a customer wants to coat the inside of a small taker tank onboard an aircraft but the end user also wanted to know if the coating complys w...
Description:
Laboratory needed for petroleum testing of three petroleum based samples that require the following analyses:
Appearance (physical state, color, etc.); Upper/lower flammability or explosive limits; Odor; Vapor pressure;Odor threshold; Vapor density; pH; ...
Description:
Biopharmaceutical company needs laboratory for testing: Tris Base; ID (FTIR) 2) Citric Acid; ID (FTIR) 3) Sodium Citrate; ID 4) Glycine; ID (FTIR) 5) Sodium Hydroxide; ID 6) Sodium Hydroxide-5N; ID 7) Hydrochloric Acid; ID 8) Sodium Chloride; ID 9) Potass...
Description:
India environmental laboratory needed for sludge testing of sludge generated after treatment of Industrial wastewater (containing toxic metals etc) & also ground water samples for the parameters approved by CPCB.
Description:
New Zealand laboratory needed for head space testing on water base paint
Description:
Environmental company needs environmental laboratory for Caffeine analysis in storm water. Looking to see if septic tanks can be detected.
Description:
Oil laboratory needed for ASTM testing of lube oil for ash, lead and water content to ASTM D874, E203, D5185
Description:
Food Laboratory for chocolate testing: Water Activity (Aw) testing for the ganache inside of a chocolate truffle.
Description:
South America biotech manufacturer needs USA toxicology laboratory for ecotoxicology studies of a formulation containing purified water, salts, cellulases enzymes, color, odour, conservative molecules to sell product in USA in accordance with US EPA,
Description:
LONG-TERM Pharmaceutical Microbiology Laboratory needed for USP Water Testing: 1. USP TAMC, TYMC, S. aureus & Ps. aeruginosa - topical cosmetic finished product.
2. USP Purified Water TAMC, coliforms, conductivity & TOC
Description:
Waste Management company needs USA physical laboratory for rubber pellet testing to determine how pellets react to burning at low temperature, electric induction furnace or crucible with the vacuum along with capturing and condensation of vapors
Description:
Energy company needs laboratory for fuel testing. I have three samples (Light Ends, Solvent, and Industrial Diesel Fuel) that would require the tests the following tests:
? Appearance (physical state, color, etc.);
? Upper/lower flammability or explosiv...
Description:
Middle East Laboratory needed for water testing for water plant. Monthly testing of water & test reports
Description:
Environmental Laboratory needed for soil testing: Soil-Water sorption coefficient (Kd) for arsenic
Description:
Mining company needs laboratory for tests on gold samples
-MLA (Mineral liberation analysis)
-Bond Rod Mill/Ball Mil/Crusher
-Bond Abrasion Index
-Water analysis
Description:
Microbiology laboratory needed for medical fabric testing for bacteria-resistance. It is nylon taffeta 70 denier with a pic waterproof backing. The same material used for mattress liners in hospital and nursing home settings. I m looking to getting more i...
Description:
Food Company needs food company for Residual flocculant testing of water-soluble protein samples treated with cationic flocculants (EPI/DMA polymer).
Description:
Boanalytical Laboratory needed for impurity testing: NIR
to determine the amount of impurities, Amino Acid, in the powder, amino acid N-carboxyanhydride (AA-NCA) in the level of 1-3%.
Amino Acid N-carboxyanhydride (AA-NCA) is sensitive in present of...
Description:
Biopharmaceutical Company needs bioanalytical laboratory for Near IR
we need analysed amino acid (AA, impurities) in amino acid N-carboxyanhydride (AA-NCA) sample in 1-4% level. AA-NCA is very sensitive ti present of water or amines
Description:
Laboratory needed for new technology testing of bio digester. Experiment needed for testing to show how toilet out lets water. pH, TDS, TSS, TVS, COD, BOD, TS, Turbidity, MPN for coliforms I look forward to hearing from you,
Description:
India contract test laboratory needed for biodiesel testing from various palm oil and waste oil
Description:
Japan or Europe mechanical laboratory needed for Mechanical endurance testing with waste water of Chassis height sensor.
Temp. cycling: -40degC to +110degC
Humidity: 10% to 95%
Composition of the waste water:
5%-ige salt spring
40 g NaCL and 10...
Description:
Company needs Environmental Laboratory for particle analysis for the minimum size of particles that are retained when water poured though a sheet of test filter
Description:
Life Sciences Company developing medical treatments needs Industrial Hygiene Laboratory for environmental monitoring testing 1. Environmental monitoring is being performed on February 8, 9, and 10
- Sampling is performed using a viable particle counter a...
Description:
USA Environmental laboratory needed that can perform this method, EPA 1664, Rev A N-Hexane Extractable Material by extraction and gravimetry. My sample is waste water.
Description:
USA Contract Laboratory needed to provide Polynuclear Aromatic Hydrocarbon (PAH) testing according to EPA 8310. It involves determining the concentration of PAH in ground and wastes using HPLC. The sample is graphite powder. Could you provide me the follo...
Description:
FDA GMP Pharmaceutical contract research organization needed for two separate ophalmology pharmaceutical projects on Prescription Eye Drops:
1. Laboratory to compound two active ingredient eye drop formulation for research project. FDA Investigationa...
Description:
Analytical chemistry laboratory needed for Bromate testing in water solution.
Description:
Analytical Laboratory needed for EPA Testing of water samples using any of the following methods:
EPA 300.1,DETERMINATION OF INORGANIC ANIONS IN DRINKING. WATER BY ION CHROMATOGRAPHY
EPA 317.0,DETERMINATION OF INORGANIC OXYHALIDE DISINFECTION BY-PRO...
Description:
Industrial milk company needs Eastern Europe agriculture laboratory needed for roughage testing and manure testing. What is the price and conditions of testing? What are your testing parameters? What the minimum amount of material and packaging is necessa...
Description:
India Geology needed for granite testing to test the stone to check whether this can be used for industrial purpose in large scale .
Description:
Large food company needs microbiology laboratory needed to conduct microbial Challenge test on dough (made from refined wheat flour) for predicting B.cereus and S.aureus growth at specific pH & water activity.
Description:
Contract Laboratory needed for stainless steel disc experiment: surface tension testing of liquids that have been exposed to a subtle energy technology with no chemical additives to the liquids. Testing liquids are distilled water and tap water. I will pr...
Description:
Bioanalytical Laboratory needed for TOC tests, Drug Binding tests (HPLC/UV based), Methanol and ACN extractable tests (waters HPLC/UV based)
Description:
Preclinical Laboratory needed for in-vivo gastroenterology study to get a first estimation of the likelihood that a gastroenterology physical barrier might become twisted or entangled in some fashion that it could cause harm to the animal and my inference...
Description:
India analytical chemistry laboratory needed for proficiency testing on powder detergent: 1-Free fatty acid as oleic acid in soap(%)
2-Free alkalinity as sodium hydroxide or sodium oxide in soap (%)
3-Volatile matter at 1050 C in soap
4-% Total active ...
Description:
URGENT Automotive Laboratory needed to Evaluate automotive products as per Toyota standard.These tests are Characteristics Test, Heat Resistance Test, Water Resistance test, Strength test...etc.Please specify if your laboratory has th facilities to conduc...
Description:
Analytical Chemistry Laboratory neeced for soil testing to quantify sulfamethoxazol, tylosin, and/or ciprofloxacin in water. We are performing adsorption tests on various soil compositions and need to determine antibiotic concentrations in the aqueous pha...
Description:
H2S compatibility test for water based mud lubricant used in oilfield. Product needs to be exposed H2S gas to see the product's reaction towards the gas.
Target is to see if the product is compatible and good to use in sour gas environment.
I am lookin...
Description:
Medical Device Laboratory needed for EUropean Pharmacopeia Testing of Surgical threads to European Pharmacopeia [8.0] Monograph 01:2008:0324, IDENTIFICATION For (Silk sutures) Identification of silk: A. Dissect the end of a suture, using a needle or fin...
Description:
Canada laboratory needed to test our waste carts to ANSI specification Z245.30 - 2008 and Z245.60 - 2008. I can provide the documents for the measurements and tests required however they are quite lengthy. External measurement compliance
Safety test
...
Description:
Certification laboratory needed for Industrial Fabrics Association International for flame-resistant material CPAI - 84 on a tent
Description:
Environmental laboratory needed for heavy metals testing of water and soil. Tests to include inorganic arsenic, methyl mercury, lead, and cadmium. The test should be able to detect at least to the level of 1 ppm.
Description:
URGENT: USA environmental laboratory needed for two European Union studies on compound tetrakis (hexylmethyl)phosphonium sulfate (THPS), which they registered for use for bacterial control in recirculating water handling systems for wells associated with...
Description:
United States environmental microbiology laboratory needed for Microbial Analysis of the concentration of e. Coli in samples of water
Description:
Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 Samples are water based polyurethane resins.
Description:
Microbiology laboratory needed for microbiology and safety certification testing of cleaning product that we would like to have tested and certified in order to market it within the United States.
We would like to prove that our product:
* does not ...
Description:
URGENT: Environmental laboratory needed for water testing lab to determine if oil in water is vegetable or petroleum based.
Description:
Large transportation company needs physical laboratory for Thermal cycle testing for water charge air coolers with below test requirements. Requirements are the following:
There are 3 stages of thermal cycle testing (TC). Stage 1, stage 2 and stage 3.
...
Description:
Packaging laboratory needed for Food Packaging testing to comply with EU food Packaging requlations. We make a water based coating that can be alternative replacement for PE, PP, PET or CPET plastic films or plastic materials. Need to have microwave heat...
Description:
South Africa and/or Kenya Environmental Laboratory needed preparation of tender specifications for quantitative laboratory analysis of polychlorinated biphenyls (PCBs) in soil, oil, water and wastes.
2. Develop specifications for reagents to be used by l...
Description:
Marine Researcher needs analytical chemistry laboratory for water testing to determine the percentage of sunscreen released into brackish water by a high performance liquid chromatography analysis. Would your lab be able to do this?
Description:
Physical laboratory needed for cut resistant testing to ANSI/ISEA 105 to test industrial glove cut resistant level. Please specify how much it costs and what's the lead time from sample receiving.
Description:
US contract lab needed for petfood testing: water binding capacity in a sample of wheat gluten. Greater than 150% is expected in this sample
Description:
URGENT Pharma company needs contract lab with very low detection methods for Measuring very low levels of hydrogen peroxide in hyaluronic acid solution, water or some other preferable solution.The detection level must be very sensitive to show that the h...
Description:
Polymer lab needed for film testing that can run ASTM E 2178 but using CMU blocks instead of a thin film. The coating we are wanting to test is a water based air barrier which we are trying to certify to ABAA criteria.
Description:
India physical laboratory needed to test Hardboard strength, water absorption etc. Kindly advice oncharges, time etc. with courier services
Description:
Contract Lab needed for alcoholic health beverage testing all nutritional info and probiotic types and quantities to support claims of fighting the hangover disease in alcohol consumers. Beverage contains 5 ingredients:
- filtered water
- cinnamon
- st...
Description:
Europe or Middle East Laboratory needed for absorption testing of briquette made of biomass substances .
We would like you to analyze the product and test it and find out the water absorption percentage and the ability of the product to store and keep wa...
Description:
USA or Canada toxicology GLP laboratory needed for biodegradation testing of a tannin based chemical used in water treatment applications (specifically used for wastewater coagulant/flocculant) that needs several tests done in order to qualify for inclus...
Description:
Certification laboratory needed to provide a quote for the UL certification for our Boiler (i:e Hot Water Generator) (Oil cum Biogas fired)
Description:
Australia Laboratory needed for orange oil content(%) test in orange oil-water emulsion and in oranges in Melbourne? Please provide me with a quotation and qty of samples required and rough timing.
Description:
EPA Environmental Laboratory needed EPA Trace Fluoride analysis of wastewater using EPA 300.0 and having problems with low spike recovery. Looks like problem with organic acid interference?? Need a lab that can handle this problem
Description:
India materials laboratory needed for aluminum foil testing: Water Vapour Transmission Rate Testing for Aluminium Foil (20-25 microns).
Description:
Manufacturer a counter top material with recycled window glass and an epoxy resin binder needs physical laboratory for NSF / ANSI / ASTM Physical Properties Testing
Food Safety:NSF/ANSI 51
compressive strength, tested to ASTM C39
Absorption, tested to ...
Description:
Environmental Laboratory needed for OECD biodegradability testing of water insoluble chemicals. (used in the oilfield industrythat require biodegradability analysis (OECD 301B: CO2 Evolution Test or other similar method). I would like to request a quotat...
Description:
Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating materials with excellent properties
and are supplied in pipe sections and slabs. Other types available o...
Description:
Midwest USA certified laboratory needed for wastewater testing to perform volatile acid analyses.The referenced Standard Method is 5560 C. Distillation Method from the 20th Edition of the Standard Methods for the Examination of Water and Wastewater. Ther...
Description:
Environmental Toxicology Laboratory needed for NYSDEC environmental toxicity testing of cleaning chemicals to New York State Department of Environmental Conservation (NYSDEC): toxicity testing data for aquatic specie (fresh water invertebrate and inverteb...
Description:
Bioanalytical laboratory needed for protein analysis. Test for microscopic (very small amount of protein-for example serum) in water, but from a swab. Protein determination that can be detected at low limits.
Description:
Asia materials laboratory needed for Tensile strength and water resistance testing of crab shells bioplastics
Description:
Analytical chemistry laboratory needed for deformulation of a water conditioner used to remove chlorine , chloramine and ammonia made of sodium bisulfite formaldehyde or sodiumformaldehy sulfoxylate
Description:
Environmental Microbiology Laboratory needed for biodegradation testing of dog waste bags for biodegradability ASTM D6400, ASTM D5338, ISO 17556, ISO, 14593 and OECD 301B.
Description:
Asia environmental laboratory needed for hydrocarbon testing.Soil and groundwater sample analysis:
? Total petroleum hydrocarbons diesel-range organics;
? Total petroleum hydrocarbons gasoline-range organics;
? Volatile organic compounds; and
? Sem...
Description:
Materials Laboratory needed for Physical Testing of Chromadek faced, EPS filled, sandwich panels.
Load testing
Strength testing
Air/water permeability
Fire resistance
Acoustic behavior and more to SANS 54509:2014 / EN 14509: 2013
Description:
FDA Plastics and Polymer Laboratory needed for ASTM Testing of Polypropylene (FDA-CFR-177.1520)
Test: Density (ASTM method D1505?68); Melting point (ASTM method D2117?82); Hexane Extractables; Xylene Extractables
Material: Polyethersulfone (FDA-CFR...
Description:
ONGOING TESTING Independent Contract Lab needed for oil transformer sample testing of Electrical Transformer Oil Samples, The tests required are: Table-1: Tests & Test Frequency for Transformer Oil Analysis Sr. No. Test Transformer Type 400 kV TX 220kV TX...
Description:
Microbiology Laboratory needed for Accelerated testing of microbial growth resistance of exterior paint films (water-based)
Description:
USA FDA Microbiology Laboratory needed for USP Microbiology Testing of USP purified water for micro (TPC ? total plate count/ heterotropic).Perform per in-house SOP/procedures, - Produce results for USP Purified Water testing that can stand up to FDA audi...
Description:
North of Italy testing house (testing laboratory) needed for EN optical tests over a multi beam safety light curtain for industrial application according to Machiney Directive 2006/42/EC and standard EN 61496-2:2013
Description:
GLP Compliance Laboratory needed for pesticide testing: Physical chemical properties test of pesticide product following CIPAC test method (example: water content, wettability, suspensibility, dustiness, flowability, attrition resistance, etc)
Description:
Puerto Rico environmental microbiology laboratory needed for Microsporidia Testing in Drinking water for 3 well samples. We will perform the sampling and send the sample by UPS/FEDEX service
Description:
University Post-doctoral Researcher needs UK environmental laboratory for water testing of samples and passive sampling extracts
PFOS, aclonifen, cybutryn, bifenox, heptachlor/heptachlor epoxide, quinoxyfen, terbutryn, dicofol and dichlorvos.
Description:
Environmental Laboratory needed for Australia EPA Testing of organic waste to EPA requirements. Ten samples need to be tested. Could you please provide a quote for the testing of the 10 samples.
Description:
Seattle area microbiology laboratory needed for Microbiological Testing (Bioburden) of biopharmaceutical product stream and Bulk Drug Substance. Environmental and Utility monitoring Purified water, Clean Steam) could also be included.
Description:
Automotive Laboratory needed for General Motors Standard Testing as per
GMW 3172_2008
Power Temperature Cycle test ( 9.4.3)
Water Test (9.5.2)
Mechanical Shock-collision ( 9.3.4)
Thermal Shock/water splash (9.4.4)
Water Freeze (9.5.4)
GMW 3191_2...
Description:
India analytical chemistry laboratory needed for USP Monograph Testing: Water test for Acetone as per USP NF monograph. Gas chromatography with TCD detector
Description:
Australia Microbiology Laboratory needed for meat testing 1. Microbial testing for vacuum bagged of meat. Standard plate count: <1,000,000 cfu/g, Total plate count: <1,000,000 cfu/g , E. Coli < 10 cfu/g.
2. Microbial testing of water for E. Coli and Coli...
Description:
Environmental Laboratory needed for water testing: Total Organic Content of water sample
Description:
Large Engineering Company needs EPA ENvironmental Laboratory for EPA testing on water obtained from groundwater well installation in Saudi Arabia
Description:
Food Microbiology Laboratory needed for microbiology testing in meats: Water e Coli and Coliforms
Meat Microbiological Standard plate count <1,000,000 cfu/g - Total plate count <1,000,000 cfu/g. e Coli <10 cfu/g
Description:
US analytical chemistry laboratory needed for analysis of food grade, fresh water, silica/diatomaceous earth.
Description:
Microbiology laboratory near Vancouver, BC needed for water testing: E. coli, Enterococcus, and Vibrio cholerae bacterial counts from environmental ship ballast water. Thank you.
Description:
USA Medical Laboratory needed for GS/MS water testing: Detecting approximately 200 to 400 ppb ethylene oxide in water sample
Description:
India laboratory needed for industrial products testing.
Description:
Australia analytical chemistry laboratory needed for agrochemical analysis of five batches of an active used in agrochemicals. The active technical grade constituent is Linuron, and the tests to be performed would be as follows:
1) Assay: this wo...
Description:
Food company in the Caribbean needs environmental laboratory for water supply testing to Off Flavours and Odours in our water supply. Please specify how long will it take to get results if we send it?
Description:
India microbiology laboratory needed for water testing for Virused
Description:
Asia geotechnical laboratory needed for water-based drilling fluids testing (mud). Differential sticking testing for water-based drilling mud.
It will be my greatest pleasure for your response.
Thank you.
Description:
Investigative Journalist Team needs Europe food laboratory for additive testing in multiple mainstream for undeclared industrial exogenous enzymes, inhibitors, other additives. While not illegal, we would like to prove the presence of these exogenous add...
Description:
Toxicology Laboratory needed to conduct an in vitro cytogenicity research study in mammalian cells or in vitro micronucleus study (Annex VIII, 8.4.2, EU Method B.10 or OECD 487). The substance is a metal chelate (very soluble in water).
Description:
Manufacture of rubber parts and seals for industrial applications needs materials laboratory for certificaiton testing of seals
Description:
OSHA / EPA Certified North Carolina Industrial Hygiene Laboratory needed for cotton dust exposure concentration
Description:
Laboratory needed to Test footwear for representative claims testing for oil resistant, waterproof / water resistent, etc.
Description:
ISO / IEC 17025.2005 Certified Europe Laboratory with QA System to ISO 9001:2008, ISO 140001:2004) needed for Calcium Sulphite hemihydrate solubility limit (precipitation temperature) of the recirculation brine. I would like to request for a quotation in...
Description:
Boston Area Bioanalytical laboratory needed for medical device research experiment with the ability of a water-jet device to cut and consume various Collagen types. Specifically it's ability to differentiate between type 1 and 3 collagen.
Description:
Industrial Hygiene laboratory needed for urine analysis for DCB (dichlorobenzidine)
Description:
Agriculture Laboratory needed for pesticide testing: 3 samples of organic waste to be tested for:
Clopyralid, picloram, aminopyralid, fluroxypyr, and triclopyr detection limit <0.1ppm
Bifenthrin (pyrethroid) detection limit <0.2ppm
Description:
Canada food analytical chemistry labroatory needed for spice paste testing: PH and water activity test of a spice paste created at home in order to sell at public markets.
Description:
Consumer Products Safety Laboratory needed for Amazon.com product safety assessment document of a room & body mist just made of distilled water and essential oils.
Description:
Nanotechnology laboratory needed for nanomaterials testing of clean coating for glass and ceramic surfaces by accredited tests: EN ISO 11998 and certifying other properties of the coating, such as adhesion to the substrate, UV weathering (ISO 11507), wate...
Description:
United States analytical chemistry laboratory needed for ellulase assay on water soluble sample
Description:
Environmental microbiology Laboratory needed for soil testing and/or water testing for clostridium perfringens.
Description:
USA Laboratory needed to Measure water content/dew point of a compressed hydrogen cylinder to Compressed Gas Association commodity spec for hydrogen 6th edition CGA G-5.3 2011.
Description:
LONG-TERM TESTING: USA East Coast Analytical Chemistry Laboratory needed for USDA Organic confirrmatory testing of imported organic cosmetic Argan Oil. The oil we buy is USDA organic, and complies to Moroccan official norms -but we want to be sure. We als...
Description:
California environmental microbiology laboratory needed for water testing by a standard test method: Vibrio cholerae detection and enumeration and bacterial counts. Exact number of samples is unknown at the current time but is estimated to be less than 20...
Description:
Cosmetics Manufacturer needs laboratory experienced with Amazon.com and Walmart required testing for testing of highly concentrated (> 95%) sucrose solution to be used as hair remover by adhering to the hair and physically pulling it out. It falls under t...
Description:
Environmental laboratory needed for soil and groundwater testing of 9 groundwater samples and 16 soil samples collected from a drug manufacturing site, for the assessment of contamination of above 7 pharmaceutical compounds both in soil and groundwater.T...
Description:
Food laboratory needed for coconut water testing for Specific heat. The specific heat is needed as a data base for plant design.
Description:
Israel cosmetics analytical chemistry laboratory needed for water resistance testing of a cosmetic.
Description:
New Jersey Environmental Analytical Chemistry Laboratory needed for water testing for nicotine
