Laboratory Outsourcing and Scientific Sourcing Center

We need a SAE J350 spark arrestor test done on a muffler. Test to be done by a US automotive testing lab/facility.

SAE J350: Spark Arrester Test Procedure for Medium-...

Contract Laboratory needed for SAE testing of fluorocarbon (FKM) seals for Fuel tank caps in motorcycles to SAE J2659 Test Method to Measure Fluid Permeation of Polymeric Mate...

MULTIPLE TESTING
Automotive Laboratory needed for UNECER testing of 12meter coach bus accordance to UNECER 51.03 Uniform Provisions Concerning the Approval of Motor Vehicles ...

MULTIPLE TESTING
USA LABORATORY (Pennsylvania/Virginia Lab Preferred)
Accredited Automotive Laboratory needed for ASTM Testing of an elastomeric bearing pad, with and with...

FCC-Recognized Laboratory needed for FCC (federal Communications Commission) connectivity certification testing of an automotive aftermarket device for connectivity.

USA Contract Laboratory needed for ASTM oil residue testing per ASTM D 7066-04 on electric vehicle EV battery components

MULTIPLE TESTING
Contract Laboratory needed for testing components of a new lawn mower being manufactured for a large company. We manufacture Lawn Mower Transmissions in Mexi...

Accredited and Recognized Laboratory needed for ISO testing for e-bike with motor capacity less than 250w. export to USA and EU market. looking for lab that is recognized and ...

LONG-TERM TESTING
Transportation Company needs Contract Laboratory for material certification testing of solvent o-rings on a regular basis and have testing performed to se...

MULTIPLE TESTS
MULTIPLE PRODUCTS
Automotive aftermarket parts brand needsTHird-Party Independent Automotive Laboratory for testing of imported filters, brake pads/shoe, su...

Automotive Laboratory neee for DIN Testing of air brake tube to Din 73378 standard Polyamide tubing for motor vehicles. . Please provide cost.

MULTIPLE PRODUCTS
Automotive Laboratory needed for General Motors Specification Testing to GM15787 specification Vehicle Exterior and Add-On Parts Paint Appearance Requiremen...

Automotive Laboratory needed for beach buggy compliance testing to GSO 15997 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS

Please help to advi...

MULTIPLE PRODUCTS
Automotive Laboratory needed for testing new waterproof electrical product used on automotive equipment such as snowmobiles and jetskis. Please answer the f...

Automotive Laboratory needed for ANSI Testing to ANSI Z26.1,Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety...

Tire Manufacturer needs Analytical Laboratory needed for XRD analysis. Please send quotation.

Materials Laboratory needed for internal quality control testing of webbing used for seatbelts according ASTM D6770 Standard Test Method for Abrasion Resistance of Textile We...

Mechanical Laboratory need for ASTM engine testing following the ASTM D5500 to study the intake valve deposits in an indirect injection gasoline engine.

Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static rolling ability
coastin...

Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
for Glazing Motor Vehicles...

Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of motor vehicles

Contract Laboratory needed for film testing of UV400 Optical Film for UV protection and light transmission reflective, absorbtion and U Value

Electrical Laboratory needed for UL Testing to UL489 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit- Breaker Enclosures. and UL1077 Supplementary Protectors:L...

Automotive laboratory needed for automotive transmission testing to specified requeirements at High temperature - automotive transmission
Low temperature - automotive transmi...

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative...

Automotive cleaning solutions company needs environmental microbiology laboratory for OECD biodegradability testing on detergent to OECD method OECD 301, Ready Biodegradabili...

Materials laboratory needed for motorbike gloves testing to EN 388 (Abrasion, Blade cut, tear and punchar) EN 420, ( PH, value, Crom VI, and etc). Please send the quotation, ...

ISO 17025 Automotive laboratory needed for all Automotive charger testing such as EMC conformance, vibration, dimensional,

Accredited laboratory needed for power steering hose testing to SAE J2050 and SAE J2076. Full validation of 1 style each of high and low pressure power steering hose.

Accredited laboratory needed for SAE J1401 / FMVSS106 brake hose testing.. Interested in doing a full validation on 5 different brands/types of brake hose and just whip testi...

Accredited laboratory needed for power steering hose testing to SAE J2050 and SAE J2076. Full validation of 1 style each of high and low pressure power steering hose.

Accredited laboratory needed for power steering hose testing to SAE J2050 and SAE J2076. Full validation of 1 style each of high and low pressure power steering hose.

Accredited laboratory needed for SAE J1401 / FMVSS106 brake hose testing.. Interested in doing a full validation on 5 different brands/types of brake hose and just whip testi...

ISO/IEC 17025 Automotive Laboratory needed for General Motors Testing: Test for automotive GM14573, Global Performance Requirements for Labels.

Automotive company needs laboratory for deformulation and development of a liquid Leather Protector for cars to manufacture it for export.

Certified Materials Laboratory needed for coating testing of Three (3) mixed adhesive coating samples tested for the following:
1. Volatile Organic Compounds (VOC) con...

USA Volkswaren approved automotive labs needed to test Al wheels for Cornering fatigue testing

AUtomotive Parts company needs Acoustics Laboratory in Saudi Arabia to perform sound testing of York centrifugal chiller

Asia automotive laboratory needed for wiring harness Crimping validation, etc., laboratory needed to conduct tests according to General Motors standards

Electrical Laboratory needed for testing of an electrothermic sensor according to the ECE R118 norm (fire protection)

AUtomotive parts company needs automotive laboratory for General Motors Testing to GMW14609 Corrosion, Simulated 3 g Occupant Load & Downward Strength Test.

Automotive Laboratory needed to conduct tests according to General Motors standards:
GMW: 3205 - Odor
, 3232-Flammability
, 3235-Foggong
,...

Automotive company needs Flammability testing on automotive brake clean aerosol formula

USA Automotive laboratory needed for SAE and ASTM Testing: Compression Stress Relaxation Test SAE J2979 + Low Temp Brittleness ASTM D2137

Automotive Laboratory needed for SAE Testing of automotive senders (hall effect transducers) tested to
SAE J1226, Electric Speedometer Specification--On Road and SAE J1399...

Physical Laboratory needed for SAE testing: solar radiation test as per SAE J575-2010, Test for Motor Vehicle Lighting Devices and Components

ISO Accredited ISO/IEC 17025 Mechanical Laboratory needed for full testing of brake pads/liners as per GSO ECE 90? Please adviseon the testing charges, TAT, Sample requirem...

LONG-TERM Eastern Europe laboratory needed for long-term testing of injection, painting and chrome plating of plastic parts for automotive industry to automotive industry spe...