Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
Accredited laboratory needed for EN 50289-4-17 method-A testing.
EH 50289-4-17: Communication cables - Specifications for test methods - Part 4-17: Test methods for ...
MULTIPLE TESTING & PRODUCTS
Contract laboratory needed for IEC testing 4/0 AWG gauge and larger high-voltage (HV) cables per the IEC 60840 or IEC 62067 standards.
Contract Laboratory needed for IEEE Testing to the following IEEE 1210 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
MULTIPLE TESTING
Electronics Laboratory needed for coil insulation product testing with pulse generator for following parameters: 18kV 1,2/50us according to standard UL/IEC 6...
MULTIPLE TESTING
Analytical Laboratory needed for Aluminum Wire Scrap product testing for chemical analysis to verify purity of sample, min. AL 99.45% required.
The sample i...
ASIA LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for SAE J560 truck-trailer wiring harness testing and inspection to standards for exporting to the US market.
Manufacturer needs Contract Laboratory for stainless steel wire testing to check the amount of Titanium Dioxide on the wire. This test is for the California proposition 65.
Contract Laboratory needed for propellant resistance testing of finished wire to MIL-DTL-82381 4.6.4.21 Propellant resistance testing of specimen of finished wire, 24 inches (...
MULTIPLE TESTING
Wire Supplier needs Contract Laboratory for wire testing.
MULTIPLE PRODUCTS
MULTIPLE TESTS
Contract Laboratory needed for ISO testing on PVC Hoses and Wiring Systems in compliance with the following ISO Test Standards ISO 6722, IS...
USA Independent Third-Party Laboratory needed for ASTM Testing of wire specifically tensile properties. to ASTM B227-15(2019)
Electrical Certification Laboratory needed to certify Tefzel electrical wiring to SAE AS22759/6
MULTIPLE TESTING
MULTIPLE PRODUCTS
Contract Laboratory needed for SAE testing of XLPE wire, sizes 8 thru 22 for ozone resistance test and temperature and humidity cycling ac...
Company sourcing ignition spark plug wires for automotive combustion engines needs Laboratory for SAE testing several of the wire types to the SAE J2031 and possibility UL 158...
USA LABORATORY
MULTIPLE TESTS
Manufacturing company needs USA Industrial Hygiene Laboratory for dust flammability and combustibility testing of dust from polishing operati...
Contract Medical Device Laboratory needed for cable testing to AAMI EC53 ECG trunk cables and patient leadwires. I would like to know the duration and cost.
Electrical Laboratory needed for IEC Certification testing of copper coated wire to IEC 613400-4-4 for anFIBC is type B, por example? Can you help me?Thank you!!!
MULTIPLE TESTS
MULTIPLE PRODUCTS
Manufacturer needs Contract Laboratory for ASTM or BS Standard testing of chemical composition of s.s.304,316,430 , cold rolled coil CRC sh...
Third-Party Independent Physical Laboratory needed for verification of steel wire parts that need to be verified dimensionally to a blueprint
Medical Device Laboratory needed for patient leads assembly (leadwires) testing to EC53-2013 ECG trunk cables and patient leadwires
Could you give me a quote for this test...
Medical Device Manufacturer needs Contract Laboratory for validation testing of ultrasonic cleaning process using industrial strength cleaning of SS wires including testing be...
USA Third-Party Laboratory needed for testing and evaluation of several new suppliers of detachable power cords. We are looking for a 3rd party company to evaluate and report ...
Electrical Laboratory needed for quality assurance testing including electrical resistance check, stress, temperature and connectivity testing on a variety of 7 different low...
Independent Accredited Testing Laboratory needed for certification testing of cables, wires, conductors.
Independent Laboratory needed for stainless steel wire testing to EN10264-4:2012 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
Please c...
ISO 17025 Accredited Electrical Laboratory needed for IEC testing of cables for all parameters
Laboratory needed for copper wire testing of high-purity wire copper (32 cm length and 8 mm diameter) so we need to analyze the Residual Resistivity Ratio (RRR). We have refe...
Laboratory needed for RF Testing ANSI / SCTE 153 2016, Paragraph 4.1, 4.2, 4.3, 4.4, 4.5 (Bandwidth, Passband Response, Insertion Loss, Return Loss, Isolation)
Corrosion R...
Europe Electrical Laboratory needed for ISO testing of cable to ISO 6722-1 Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, test methods and requirem...
Independent Laboratory needed for TXL and GXL cable testing to SAE J1128 Low Voltage Primary Cable
Electrical Laboratory needed for IEC wire connector pull test and hi-pot electrical testing for crimped connector and wire to IEC 60352
Electrical Laboratory needed for automotive electrical wires and cables fire performance testing according to ECE R118-02 & R100.
Industrial Laboratory needed for the following IEC wire assembly testing: wire pull testing, hi-pot testing of crimped wire assemblies in passenger rail car manufacturing for ...
Laboratory needed for relaxation testing for PC strands (7wires) as per ASTM A416/416M Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Conc...
Electrical Laboratory needed for modular wiring products tested and certificated to BS8488 Prefabricated wiring systems intended for permanent connection in fixed installation...
Electrical Laboratory needed for cables testing to HO7V-U/HO7V-R and HO7V-K according to UNE-EN 50525
Electrical Laboratory needed for SAE certification and testing of single conductor wires to SAE J1128 Low Voltage Primary Cable
Industrial Laboratory needed for radiance testing of electroluminescent wire that is approx. 125 long and 1/2 diameter per requirements of table 3 on page 15 of MIL-STD-3009 (...
ISO 17025 Accredited Laboratory needed for DIN testing of Messenger Wire according to DIN 48201, Dropper Wire, DIN 43138, Contact Wire and according to BS EN 50149 Railway ap...
Metallurgical laboratory needed for ASTM testing of copper clad steel wire to two ASTM Standards including:
ASTM B227, Standard Specification for Hard-Drawn Copper-Clad St...
Mechanical laboratory needed for ASTM Testing (yield/breaking strength/elongation) of uncoated seven-wire strand (15.24mm) in accordance with ASTM A416 Grade 270.
Electrical laboratory needed for AITM testing of wires /cables 1) AITM 2.0008A Smoke Density Electrical Wire/Cable for Power Supply, 2) AITM 2.0008B Smoke Density Electrical a...
Metallurgical materials laboratory needed to quantify surface roughness of thin metallic strips (interferometry, atomic-force microscopy AFM, etc.)
Large corporation needs metals materials laboratory for RoHS testing for plain-carbon steel wires of various sizes, grades, and treatments. Wire is in continuous length, but ...
Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.
1) Copper conductor, Mica tape, XLPE insulation, LSHF Bedding, Galvanize...
Physical laboratory needed for EN electrical wiring testing to
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption EN 6059-305
Dynamic cut ...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests