Need Help?
Contact Us
NEED A LABORATORY?

Save time and money searching! Find a Lab for all your laboratory testing and scientific research.

Submit Laboratory Test Request

ARE YOU A LABORATORY?

Gain new business by registering your laboratory.

Register Laboratories

HAVE QUESTIONS?

Call us 24/7 1-855-377-6821 or send us an email.

Need Plastics Testing or Scientific Research?

Save time and money searching by submitting a lab request.

Submit Lab Request


Want access to our Plastics lab requests?

Create an Account

Most Recent Plastics Laboratory Requests

Contract Laboratory has received the following Plastics Laboratory Requests which need to be fulfilled! These Plastics Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Plastics Laboratory and Scientific Research. If you need a Plastics Laboratory, please Submit a Plastics Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

ISO Plastics Biodegradation

Description:

Environmental Laboratory needed for ISO biodegradation of plastics to ISO 14855 / ISO 14852


Title:

ISO Tensile Testing

Description:

ISO 17025 Polymer Laboratory needed for Tensile testing to ISO 1421 Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break


Title:

Building Materials Standards Testing

Description:

Materials Laboratory needed for plastics testing.
1. NFP 92 503 Electrical burner test used for flexible materials thickness no more than 5mm
2. NFPA 286 Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to ...


Title:

ASTM Plastic Products Biodegradability Testing

Description:

LONG-TERM TESTING Disposable plastics company needs microbiology laboratory for ASTM biodegradability testing of a wide range of plastic disposable products to ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Material...


Description:

Fine Furnishings Company needs Materials Laboratory for ASTM Testing to ASTM D648 Heat Deflection Temperature of Plastics


Description:

Plastics Laboratory needed for urethane testing to HKMC spec MS300-55 (release of volatile organic compounds) testing on a UVA-cured acrylated urethane.


Description:

ISO 17025 Materials Laboratory needed for ASTM Testing of biodegradable plastic bags to ASTM 6954 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation


Description:

Plastics laboratory needed for gamma ray irradiation and measurement of light transmittance in PET bottles used in food and beverages. For measurement of light transmittance, it must be measured at 540-550nm. CFU should be less than or equal to 10 for mou...


Description:

LONG-TERM TESTING Aerospace company needs materials laboratory for testing new aircraft part including mechanical property testing for composites and plastics.Our immediate needs are tests for Flexural and Bearing strength of Lamitex Fr-4 Glass/Epoxy mate...


Description:

Plastics laboratory needed for ASTM testing to ASTM D6954-04 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation


Description:

Plastics laboratory needed for ISO biodegradability testing as per ISO 15985, Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas


Description:

Medical Device laboratory needed for surgery simulation and functional testing of sterile surgical packs after sterilization including on:
- aged samples (2 years past used by date) for: appearance (noting any signs of discolouration)
- functionality (...


Description:

Materials laboratory needed for ASTM Testing of plastics to ASTM D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep, Rupture of Fiberglass Reinforced Plastics.


Description:

LONG-TERM TESTING Materials laboratories needed for proficiency testing for inter-laboratory comparisons for method validation (and) accreditation of the following four ISO standards:

ISO 4589-2:2017, Plastics -- Determination of burning behaviour by o...


Description:

Large industrial supplier needs plastics laboratory for roughness testing on rubber sheets.


Description:

Plastics laboratory needed for shrink film testing for:
puncture thumb edge, puncture sharp edge, tear strength and haze


Description:

Toxicology laboratory needed for USP biological reactivity testing of rubber and or silicone used in pharmaceutical products to USP 6, Plastics Test


Description:

Plastics laboratory needed for ASTM testing of plastic film and sheeting for water vapor using a modulated infrared sensor to ASTM F1249-13 test method for water vapor transmission rate.


Description:

Medical Device laboratory needed for several microbiology and toxicology tests of a polypropylene orthodontic device.

o Mercury limits
o Microbial limit test
o Toxicology assessment
o RIPT assessment (for products that touch skin)
o Pla...


Description:

Plastics laboratory needed for acetaldehyde testing for PET bottle preforms by gas chromatography.


Description:

LONG-TERM TESTING Plastics laboratory needed for ingredient analysis of recycled PET (RPET) for benzene, acetaldehyde, and limonene measurable in PPB.


Description:

Automotive laboratory needed for several tests on plastics oil pan auto parts including oil pan assembly fatigue resistance (vibration test), M8 bushing pull out test, stone impact test, 21 day heat age test, pressure burst test, thermal cycle sealability...


Description:

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test of 3 rubber parts. The property measured by this test is the apparent modu...


Description:

LONG-TERM TESTING Plastics laboratory needed for acetaldehyde and viscosity testing of PET to 2 ASTM standards:
for acetaldehyde according ASTM F2013-10 Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automate...


Description:

Construction materials laboratory needed for plastIcs testing for identification of additives in plastic pipes


Description:

Plastics construction materials company needs laboratory for Solar Reflectance Index SRI measurement for LEED compliance to ASTM E1980


Description:

Automotive laboratory needed for VW-Audi plastics melamine resin foam testing for conformance to VW Audi requirements.


Description:

LONG TERM TESTING Plastics laboratory needed for chemical composition analysis for nitrogen content (should be theoretical N~1500 ppm) in 3 plastic pellets containing ~30% carbon black.


Description:

Material analysis laboratory needed for the following testing on plastics:

Environmental Cycle test after 50 cycles according to PV 2005

Lightfastness according to PV 1303 after 3 period of exposure

Grey scale level, color and grain according to...


Description:

Packaging / plastics laboratory needed for neck leakage testing of HDPE plastics bottles in different sizes.


Description:

Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements


Description:

Plastics laboratory needed for discoloration testing of elastic films after exposure to NOx..


Description:

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM D4976 + ASTM D5203, density, melt flow rate, elongation at break, tensile strength, UV resistance, stres...


Description:

Plastics laboratory needed for Total Organic Carbon testing of a plastic.


Description:

Materials laboratory needed for plastics testing for hazotoxin determination from burning plastics.


Description:

URGENT, LONG TERM. Certified plastics welding laboratory needed for peel and crush testing of polyethylene coupons on electro-fusion welding joints according to EN 13067.


Description:

LONG TERM TESTING. Materials laboratory needed for thermal testing of plastics for DIN EU ISO 4577 material.


Description:

Materials Laboratory needed for Plastics recycling conformity to IS 14534, Guidelines for Recycling of Plastics


Description:

Pharma Packaging laboratory needed for USP Testing of plastic containers as per USP 661 , Containers- Plastics, Physical Tests.


Description:

Laboratory needed for plastics biodegradability testing of under landfill condition. Plastics typically % biodegradation in 180 days. Please provide quotation.


Description:

Plastics packaging company needs materials laboratory to test the Intrinsic Viscosity (IV) of Polyethylen Terephtalate (PET) for a product.


Description:

Sports surfacing company needs Construction materials laboratory for ISO plastics testing UV testing as per ISO test method ISO 4892-2:2660


Description:

Materials laboratory needed for haze and luminous transmittance tests for glass or plastics


Description:

Laboratory needed for phthalates analysis on plastics packaging made of polypropylene resins.



Description:

Materials laboratory needed for proficiency testing programme for Linear Thermal Shrinkage of Plastics as per ASTM D 1204.


Description:

Packaging laboratory needed for Plastics and Polymers testing of HDPE bottles for stack load stability testing and wall thickness


Description:

Materials laboratory needed for ASTM proficiency testing for Linear Thermal Shrinkage of Plastics as per ASTM D 1204, Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature


Description:

Automotive manufacturer needs Materials Laboratory for DIN Testing:Torsion pendulum test to DIN EN ISO 6721-2A, Plastics -- Determination of dynamic mechanical properties


Description:

Plastics Materials Laboratory needed for erucamide content in plastics product


Description:

LONG-TERM TESTING Large corporation needs microbiology laboratory for Measuring Anti-Algae and Antibacterial efficacy of plastics composites compound.


Description:

Materials Laboratory needed for Testing for plastics testing of LDPE / HDPE plastic bags:
1. Oxygen Transmission Rate (OTR)
2. Water Vapor Trasmission Rate (WVTR)


Description:

Materials laboratory needed for plastics testing of corrugated polypropylene layerpad. abrasion test in accordance to DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD.


Description:

Materials Laboratory needed for Biodegradation testing of Plastics as per ASTM D5511, Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions and ASTM 5526, Standard Test Method f...


Description:

Materials Laboratory needed for fire and explosion testing of a plastics powder


Description:

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement , density, relative density, specific grav...


Description:

LONG-TERM TESTING Clinical Central Laboratory processing blood and plasma needed for product development and optimization studies microfluidic devices and their components to study the effect or interference of devices on blood chemistry and overall spe...


Description:

Packaging company needs plastics laboratory need Melt Flow Index and Density Testing of HDPE.


Description:

Canada plastics laboratory needed for ASTM testing on tensile bars. The following tests we are interested in having done;

Izod Impact (Notched) ASTM D256
Flexural Modulus ASTM D790
Plastics Tensile Testing ASTM D638

We are interested in getting a...


Description:

USA Materials Laboratory needed for Density testing according to ASTM D1505, Standard Test Method for Density of Plastics by the Density-Gradient Technique. Please provide me the following information:

1. standard & rush turn around time & fee
2. pric...


Description:

USA plastics laboratory needed for resin testing for Molecular weight determination for an oligomer resin


Description:

USA Materials Laboratory needed for ASTM Testing: gel content of polyethylene samples using ASTM D2765-11, Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics (xylene or Decalin extraction, boiling sol...


Description:

Plastics Laboratory needed for ASTM Testing: Brittleness Temperature testing performed to ASTM D746 on thermoplastic urethane.
I need baseline number so am looking at measuring 2 lots.


Description:

Plastics Materials Laboratory needed for Polytetrafluoroethylene PTFE Testing of PTFE UV transmittance in the 250 - 260 nm range
Objective: To establish the % transmittance of a PTFE sample of :
1) 0.50 mm thick; Sample size = 1.
2) 0.30 mm thick; Sa...


Description:

Plastics (Plasticised PVC) flooring manufacturer needs physical laboratory for combustion analysis of condensate from manufacturing operation that produces condensate. I am interested to have this liquid evaluated for future combustion purposes i.e. a po...


Description:

Middle East Plastics company needed for plastics laboratory for PVC and PPR Pipe testing for ISO International Certification


Description:

Asia materials laboratory needed for Tensile strength and water resistance testing of crab shells bioplastics


Description:

FDA Plastics and Polymer Laboratory needed for ASTM Testing of Polypropylene (FDA-CFR-177.1520)
Test: Density (ASTM method D1505?68); Melting point (ASTM method D2117?82); Hexane Extractables; Xylene Extractables
Material: Polyethersulfone (FDA-CFR...


Description:

Plastics Laboratory needed for Polyurethane
Testing of Polyurethane foam Polyurethane elastomer and Polyurethane Thermoplastic


Description:

UAE plastics laboratory needed for Gel Permeation Chromatography testing for HDPE manholes used in sewerage network project.
Material is PE100


Description:

Medical Device Materials Laboratory needed for ASTM biodegration testing to support biodegradable claim for a patient belonging bag. We're hoping to get the test done per a standard; we've identified ASTM D5511 (Anaerobic Biodegradation of Plastics) or AS...


Description:

Large plastics company needs polymer laboratory for polypropylene testing: measure MFR of polypropylene but of very high MFR (~ 1200 g/10'). Measument of such a high MFR requires smaller sized die opening.


Description:

USA ISO 9001 certified materials laboratory needed for ASTM Lubricant or Plastics Testing: thermal conductivity testing on lubricants, ASTM D2717 or ASTM D5930


Description:

Plastics Laboratory needed for plastics materials process chemistry research study to perfect a reliable, fast and economical method for creating a thermoset plastic-type compound from rosin and the oil of the flax seed plant. Probable involvement in ASTM...


Description:

Plastics Laboratory needed for residual Low-density polyethylene LDPE testing of LDPE in Vitamin E TPGS? Our raw material (Vitamin E ) is packaged by LDPE bag.


Description:

Middle East materials laboratory needed for ASTM Testing: barcol hardness test glass reinforced plastic to ASTM D 2583, Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impresso


Description:

Plastics Laboratory needed for ASTM Testing of plastic samples tested for scratch resistance, crack resistance and wear resistance of ASTM D7207-13, D5628, E11-15


Description:

Middle East, Asia or Europe Materials Laboratory needed for Plastics Testing: ASTM Testing to ASTM D746, Brittleness Temperature of Plastics


Description:

Plastics Laboratory needed for plastics testing.Test contents in plastic parts.

Ethylaminobenzoate
Heptaoxacyclopentatriacontane
Hexaoxacyclotriacontane
Tetraoxacycloeicosane
Pentaoxacyclopentacosane
N, O cmpd MW=>193

For a pre-test purpose of ...


Description:

Europe Plastics laboratory needed for polymer testing of transparent Polycarbonate Sheets to UNI 13468-2 which thickness are around 100 micron.


Description:

Plastics Materials Laboratory needed for material tests for ash ,viscosity and melt flow in plastics most tests will be virgin material and a variety of plastic


Description:

Materials laboratory needed to test UPVC fittings for ISO 1452-2 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure


Description:

Polymer Laboratory needed ASTM plastics testing: ASTM D7573 (Total Organic Content)
We have Plastic Tubing that requires the following test:

ASTM D7573 ? Total Carbon & Organic Carbon in water by High Temperature Catalytic Combustion & infrared Dete...


Description:

USA Materials laboratory needed for plastics testing: RoHS quote on plastic components. 3 assemblies

Tests seeking:
1.Lead (Pb)
2.Mercury (Hg)
3.Cadmium (Cd)
4.Hexavalent chromium (Cr6+)
5.Polybrominated biphenyls (PBB)
6.Polybrominated diphenyl...


Description:

Asia Laboratory needed for Desert Climate (Natural weathering test) follow standard ISO 877 method A,Plastics - Methods of exposure to solar radiation for 2 years and evaluate every 1 years


Description:

Plastics Laboratory needed for peel strength test machine according to BS EN 13121-3;2008 and other relevant standard to check the peel strength of thermoplastic lined frp laminate.


Description:

Materials Laboratory needed for plastics ASTM Testing to ASTM D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials


Description:

Plastics Laboratory needed for polymer composite testing to determine diffusion coefficient in compostes and polymers.


Description:

Pultrusion company looking for Europe plastics laboratory for ISO mechanical, electrical and heat testing s for pultruded FRP profiles. Would help, if most of the test could be done at the same test lab.


Description:

United States Materials Laboratory needed for DIN Testing to DBL 5555, DaimlerChrysler AG 70546 Stuttgart Standards Car Interior Materials Testing and
DIN 53435, Testing of plastics; bending test and impact test on dynstat test pieces. standard by Deut...


Description:

Plastics Laboratory needed for cryogenic testing: cryogenic tests for Thermoplastic multilayer (non-vulcanized)hoses and hose assemblies according to BS EN 13766:2010?Temperature -50 degrees centigrade If you need further details please ask Thank you very...


Description:

Canada Plastics Laboratory needed for ISO Testing: Heat deflection temperature for 2 injected plastic bars for each materials to ISO 75 Heat Deflection Temperature


Description:

Texas plastics laboratory needed for DIN Testing performed on plastic sheeting to
DIN 53370
DIN 53378
DIN 5388
DIN 53455


Description:

Plastics Laboratory needed for plastics comparison testing: Compare two different plastics to a burned plastic to indicate which plastic in contained in the burned materials.


Description:

Plastics laboratory needed for textile fiber testing. Form plastic pellets into textile fibers for testing/analysis and carry out testing on those fibers.


Description:

Materials laboratory needed for ASTM Testing. Plastics Testing to ASTM D256-06 Determining the Izod Pendulum Impact Resistance of Plastics


Description:

Plastics materials needed for analytical chemistry testing: deformulation of 1 part hybrid epoxy. Can you tell me the cost ?


Description:

US testing laboratories for OECD Biodegradation Testing - specifically Biodegradation of Plastics Testing and other ingredients used in personal care. Looking for labs that currently run OECD 301 and OECD 306. Please advise how long till I am able to rece...


Description:

computer Manufacturer needs Plastics Resin Testing of computer keyboard's one plastic part: it is manufactured from ABS resin, but we need proofing that it does not has included Polyvinyl Cloride (PVC)?


Description:

Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and plastics used in parts we produce. The following tests include: -Compressed natural gas (CNG)/Liquefied petr...


Description:

Africa plastics laboratory needed for polymer testing of 10 samples of organic powder (prepared from poly (ethylene terephthalate). For these samples, the following tests are required:
1. GPC
2. NMR
3. FTIR

I need to know the compounds present in th...


Description:

Plastics Laboratory needed for ASTM Nylon 66 material analysis testing and product in cold chamber at -20C. Faced nylon 66 molded product breakage problem. Used Nylon 66 molding product material analysis testing and product in cold chamber at -20C.


Description:

South California Materials Laboratory needed for plastics testing: intrinsic viscosity test needed on plastic resin water bottle gradeIV test on 3 sample of plastic resin in pallet form.


Description:

Plastics Laboratory needed for polypropylene testing of 6 samples of PP and I would like them tested for the following characteristics:-

1. MFI (/10 min)
2. Density g/cm3
3. Tensile strength MPa
4. Tensile elongation MPa
5. Fexural modulus Mpa

...


Description:

Plastics laboratory needed for validation testing for XLHDPE and LLDPE material used in the manufacture of DEF tanks for Navistar. As described; 1. Soak 10 tensile bars of the LLDPE material (and XLPE material for a baseline) in room temperature DEF solut...


Description:

Polymer Laboratory needed for plastics Testing of PVC product Identification Testing of PVC


Description:

Europe Plastics Laboratory needed for plastics testing


Description:

Africa materials laboratory needed for plastics testing : plastic migration kinetics with computational and analysis


Description:

Plastics Laboratory needed for physical testing: UV and moisture resistance testing on Black HDPE pails as well as 4 mil polyethylene bags.


Description:

India Plastics Laboratory needed for plastics testing of Laminated plastic Films


Description:

India Plastics Materials Laboratory needed for plastics testing:

1 DOP (DI OCTYL PHTHALATE ) AS PER ATTACHED ANALYSIS REPORT

- SPECIFIC GRAVATY
- DENSITY
- FLASH POINT
- EVOPRATION POINT
- FREEZING POINT

SO CAN YOU PLEASE HELP IN THIS CA...


Description:

Canada or USA Polymer Laboratory needed for plastics testing: PET testing for 1. Measuring melt flow index of PET samples
2. Molecular weight evaluation of PET samples using size exclusion chromatography
3. Thermo gravimetric analysis (TGA) on PET sampl...


Description:

Accredited Plastics Laboratory needed for PET Testing for intrinsic viscosity of the preform PET. Please let me know whether the method of study is accredited; it is essential eventual report would come from an accredited laboratory. We would like to exam...


Description:

Independent, accredited Plastics Laboratory needed for plastics testing: failure analysis of sealant material for failure on site that might be structural silicone, weathering silicone or polyurethane. We are looking for the following:

Confirmation of...


Description:

US Plastics Laboratory needed for plastic ASTM Testing. A full package of information for HDPE material including:
1.Stress-Strain data for (tensile, compression, shear)
2.Strain rate sensitivity parameters identification
3.The graph of strains in late...


Description:

Plastics Laboratory needed for carbon black testing for amount of carbon black in rubber hose.


Description:

Plastics Laboratory needed for ASTM Testing : Polypropylene resin testing to ASTM D1238,Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer , melt flow rate, melt index, volume flow rate ASTM D6290, Standard Test Method fo...


Description:

Plastics Laboratory needed for plastics testing of test Microwave use plastics laminated bags that under 21 CFR 177.1390 (Laminate structures for use at temperatures of 250 deg . F and above) Our microwave steam bag is made of Polyester (outside layer) an...


Description:

Petrochemical firm needs middle east plastics materials laboratory for ASTM Testing 2 samples of PET polymer granules to ASTM D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestio...


Description:

USA Polymer Laboratory needed for injection molding of six different polymers injection molded to ASTM D 543, Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents , chemical reagent, dimensional changes, exposure, mechanical p...


Description:

FDA GMP US analytical chemistry laboratory needed for plastics Extraction testing outlined by FDA 21CFR177.1520 and 21CFR176.170 for molded parts based on polypropylene.


Description:

Plastics laboratory needed for forensic analytical chemistry testing: UV Inhibitor testing for amount levels based on 2 baseline samples. Material is polyethylene netting.


Description:

Materials Laboratory needed for plastics testing: identification of few ppm of additive in poly(ethylene) film from none additive PE film? I tried the subtraction of spectra, but failed to identify the material because too small amount of additive.


Description:

Plastics Laboratory needed for SAE polymer testing of Fluoro polymer to SAE AMS 2491 Rev E.Surface Treatment of Polytetrafluoroethylene (PTFE), Preparation for Bonding


Description:

Plastics manufacturer needs environmental toxicology laboratory for plastics toxicology testing of manufacturer's UPVC Pipes (certification testing) which are used in a variety of ground applications.


Description:

Manufacturer of Fiber reinforced plastic products like tanks, vessels, scrubbers etc. needs plastics laboratory for ASTM Testing: the coupon testing in mumbai as per our specified astm standards as mention below 1) Flexural Strength & Flexural modules- AS...


Description:

ISO Middle East plastics laboratory needed for polymer testing: thermal conductivity of polymer coating 1-4 mm thickness.


Description:

Oregon plastics laboratory needed for polymer testing: crosslinking of acrylaminde polymer sheet.


Description:

Plastics Laboratory needed for ASTM Testing: Darmstadt Pipe Tilting Jig Test)on pipe pvc pipe liners:DIN 19565 200,000 cycles. High Pressure Cleaning Resistance: DIN 19523 Thermal Movement:EN 1055 Heat Deflection Temperature (ASTM D648 Method A Izod Impa...


Description:

Plastics Laboratory needed for plastics testing: Basic plastics tensile testing of plastic chain lengths approximately 1 metre long. Anticipated tensile less that 8000lbs.
Multiple samples to establish Average Ultimate Strength.
no special handling requ...


Description:

Saudi Arabia, UAE, India, Middle East, GCC Plastics analytical chemistry laboratory needed Analytical Chemistry Laboratories for carbon black testing of recycled tyres and to analyze the chemical characteristics/specifications/ Contents of the recycled ti...


Description:

Asia Plastics Laboratory needed for Plastics Testing to BS EN1746: EMSD gas authority not allow due to MS2086 which is equivalent to BS EN1746 is not listed in accreditation list although we product certification license.


Description:

India Plastics Laboratory needed for glass testing: fiber orientation of the injected molded component of material N66 composed of 65% polyamdie ,35%Glass fill.


Description:

Canada or USA Plastics Materials Laboratory needed for Ford / SAE J2302 thermal effectiveness testing. BMW/SAE 2302 thermal effectiveness testing. Need testing on wire harness tapes.


Description:

Plastics Laboratory needed for ASTM Testing of Polyethylene lined material to establish various measures. 1. Physical tests? a. Hardness test (ASTM D 2240), b. Density test (ASTM D 792 or ISO 1183-1), c. Thermal expansion test (with Netzsch dilatometer), ...


Description:

Israel, USA or China plastics laboratory needed for glass fiber testing: Silica Glass Fiber Cord
Polyethylene terephthalate fiber
Silicone covered Fiberglass tubing
Nickel Chrome heating wire
Various materials used for labeling
Rubber plugs for seali...


Description:

India, Karnataka, Bangalore plastics laboratory needed for plastics testing of polythene covers bags. we need to test our biodegradbale plastic polythene bag


Description:

India Materials Laboratory needed for ASTM Testing: Plastics Testing profile to astm e84-70,astm e84-81A.


Description:

ISO Analytical Chemistry Laboratory needed for DIN Testing of inmolded part for 1,3 Butadiene per DIN EN13130-4, Materials and articles in contact with foodstuffs - Plastics substances subject to limitation


Description:

Southern California Plastics Laboratory needed for random third party testing: quality control testing of our production line for: tensile, impact, heat distortion, moisture, etc. for engineering resin


Description:

Plastics Laboratory needed for plastics testing: Size Exclusion Chromatography Service needed. Quotation on a per sample basis. Phenolic Resins, molecular range 100-10,000. Polystyrene Calibration, plotted chromatograms, calculated molecular weight and...


Description:

Texas certified physical laboratory needed for MIL-STD airline seat testing. The specifications are:
MIL-S-23190
50 pounds per AS23190-1 sh 5 (note 6)
Would like to know what labs are in the area for various testing including material properties testi...


Description:

USA Plastics Laboratory needed for polyester testing : Test Polyester Sewing Thread Test Thread per Fed STd-191 Method 4804&5804.


Description:

USA Plastics Laboratory needed for Fiber reinforced Plastic coupon testing 1) Glass content, wt percentage. 2) tensile strength, 3) flexural strength, 4) tensile modules, 5) flexural modules 6) peel test & lap shear test for Pvc Frp coupon.


Description:

India Plastics Laboratory needed for Testing as per IS 12866:1989 for light diffusion of Fibreglass Reinforced Polymer Roofing Sheet


Description:

Europe or UK plastics laboratory needed for PVC testing in PVC materials for medical device. Determination of: 1.Jellification degree2.K-Value3.Shore A hardness


Description:

Toronto Plastics Laboratory needed for plastics Testing of sample pieces of HDPE and LLDPE plastics to ASTM E1354 at an incident heat flux of 50KW/M^2 in the horozintal Orientation.


Description:

India Plastics Laboratory needed for plastics testing: Tensile testing of cotton based fibre rainforcement plastic Breaking load,Strain & Stress at failure,%Elongation,Elastic modulus,Stress Vs Strain Plot,Load Vs Deflection Plot


Description:

South Africa plastics laboratory needed for lastics testing: Relative Viscosity on plastics
Vicat


Description:

Plastics Laboratory needed for polypropylene testing: % etyhlene in PP and how much is cost per sample.


Description:

USA Plastics Laboratory needed Melt Flow Index or Melt Volume Ratio of thermoplastic urethane pellets. Looking for impartial testing for discrepancy between manufacturer and customer results.


Description:

Plastics laboratory needed for ASTM Testing of 7-8 samples of vinyl sheet piling. Tensile strength, IZOD impact, transmissivity and equivalent permeability, heat deflection, and UV stability degradation.


Description:

Saudi Arabia Plastics laboratory needed for ASTM Testing: MELT FLOW INDEX OF HDPE & PP 5 SAMPLES


Description:

Europe plastics labroatory needed for DIN antistatic testing to DIN 53482 to determine the antistatic feature of artificial leather we are going to develop


Description:

Plastics Laboratory needed for ASTM Plastic Testing of injection plastic components of PBT Valox, particulary.
Fusion point, Fuid point, specific weight, hatdness, tensile strenght.


Description:

Asia plastics laboratory needed for plastics testing: Oxygen Transmission Rate (OTR) for plastic film Laminate plastic film


Description:

Plastics Laboratory needed for ASTM Testing: creep analysis for a plastic material per ASTM D2990, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics.


Description:

UAE plastics laboratory needed for rubber testing: quality checking of rubber used in conveyor belts for maximum long life . for stone crushing company in uae . We would like to know if you provide services for testing of the quality of material used in ...


Description:

Asia and India plastics laboratory needed for Delta Y of Purified Terephtaliec Acid 2-3 samples of PTA,
Required test named as delta Y .


Description:

Europe Materials Laboratory needed for plastics testing: Determination of the coefficient of thermal expansion (TMA - ISO 11359; or dilatometry)
-40ºC to +80ºC


Description:

Physical Laboratory needed for ASTM testing foam insulation for tensile strength to ASTM D1623, Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics at cryogenic temperatures (-265 F / -165 C). Can you do such testi...


Description:

Safety Laboratory needed for BS EN Testing to BS EN388 Protection against Mechanical Hazards and BS EN422, Rubber and plastics. Machines. Safety


Description:

Plastics Laboratory needed for polyester testing. Determination of nitrogen and /or sulfur content in the range of 0.1ppm up to approx. 10ppm
Sample is a thermoplastic polyester (solid at RT)


Description:

Plastics Laboratory needed for polymer testing to determine the molecular weight and polydispersity index of an insoluble polymer (insoluble in commonly used organic and aqueous solutions)


Description:

Plastics Laboratory needed for ASTM Testing, ISO Testing and DIN Testing of 25 kg capacity Plastic bag which used for packing polypropylene or polyetheylene pellets inside the bag to be tested for its fitness


Description:

Mechanical Laboratory needed for plastics automotive testing to test painted plastic parts test for VW TL 211 Specification.


Description:

Plastics laboratory needed for epoxy testing: "LONG TERM FLEXURAL CREEP TEST" for epoxy resin CIPP liner use in pipe rehabilitation.


Description:

Plastics laboratory needed to test water vapour transmission rate and oxygen transmission rate in some flexible films. I have 16 samples to test it.


Description:

Plastics Materials Laboratory needed for polyethylene testing of 12" O.D. corrugated polyethylene wastewater drainfield pipe for 15 years and we would like it tested for H-20 wheel loads and for burial to 8 feet deep.


Description:

America Microbiology Laboratory needed for antibaterial testing of "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices to ISO 22196 Antimicrobial Activity of Plastics "Measurement of Antibacterial Activity on Plastics Surfaces "Anti-ba...


Description:

USA Plastics Laboratory needed for plastics testing. Test Acetaldehyde in Bottle grade resin for PET manufacturer. We are looking for a third party to independently test our resin.


Description:

India Packaging Materials Laboratory needed for packaging testing: Optimized temperature and compression pressure or torque for induction heat sealing of wax coated liners with sealant layers of plastics on aluminium foil laminated with pulp or foam backi...


Description:

Materials laboratory needed for ASTM Testing mechanical testing to ASTM D638 Standard Test Method for Tensile Properties of Plastics. biaxial plaanr fatigue of composite materials, mo of samples:12 (almost)


Description:

USA Physical Laboratory needed for ASTM Testing to ASTM-D-2183 Test Method for Flow Properties of Adhesives.ASTM-D-2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index).207000...


Description:

Chennai Plastics Laboratory needed for PVC Testing: UV light exposure weathering testing for a PVC material


Description:

India Plastics Laboratory needed for plastics testing. 3 Samples Need to be tested


Description:

Asia Materials Laboratory needed for ASTM Testing to ASTM 6954 - Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation comprises three Tiers of testing; oxidation, biodegradation ...


Description:

Physical Laboratory needed for ASTM Testing to ASTM C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics. Tensile testing of 95 pieces of welded cpvp and pvc.


Description:

Middle East Materials Laboratory needed for ASTM polymer testing: self ignition temperature test of polyresin material (acrylic material) according to ASTM-D1929, Standard Test Method for Determining Ignition Temperature of Plastics

address: Dubai, UAE...


Description:

Plastics Laboratory needed for PVC compound testing to determine the Flammability temperature ( or Temperature Index) follow to BS ISO 4589-3 Plastics-Determination of burning behaviour by oxygen index


Description:

USA Plastics Laboratory needed for MALS Polymer Testing for measuring Intrinsic Viscosity and Molecular Weight of various polymers of hyaluronic acid formulations. Preferabley using MALS or other suitable/validated methodology.


Description:

Canada and USA Analytical Chemistry Laboraory needed for plastics/ rubber testing to ISO 13741-2:1998 (Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by ca...


Description:

India Plastics Laboratory needed for plastics testing of plastic sheets

address: Karachi Pakistan


Description:

India Plastics Laboratory needed for polymer testing: mechanical properties of polymer film (thin) % elongation and tensile testing of oplymer films, five samples of films. Please send the film size and thickness information.


Description:

Plastics Laboratory needed for DIN Testing or ASTM Testing for properties of polyisocynate

NCO Content,
Non-volatile content
Viscosity at 23°C
Iodine color value
Free TDI monomer, Equivalent weight
Flash point approx. 5°C
Density at 20...


Description:

India Materials Laboratory needed for ASTM Testing of Plastics Film, Base Wt gm/m2 Width mm Avg. Tensile Strenth (CN/25mm) Avg. Elongation at Break (%25mm) WVTR(g/m2*24h) Water Resistance (mbar) Other
MD CD MD CD


Description:

Plastics Laboratory needed for Polymer Testing, ASTM Testing to ASTM D6068, Standard Test Method for Determining J-R Curves of Plastic Materials


Description:

Plastics Laboratory needed for analytical chemistry testing for chemical residue left by the laundry facility after washing


Description:

Acoustics and Plastics Laboratory needed for JIS testing to the standards methods below of a bonded plastic sheet with a tissue layer with 2mm of total thickness. * JIS K 6850 - Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bo...


Description:

Plastics Laboratory needed for rubber testing: lab test compressive stress relaxation of rubber. There are two test conditions. One is in 150'C air for 1008 hours, the other one is in 150'C SF 105 fluid for 1008 hours.


Description:

West Coast USA Plastics Analytical Chemistry Laboratory needed for Flakes Contamination Testing for: PVC, PETG, Polyamide. Need to know if testing can be done on recyled bottle flakes for contamination Identification purposes. Contaminants in question ar...


Description:

Analytical Chemistry Laboratory needed for plastics testing: comparison testing of PvC Files: DSCDSC tests on two PVC samples


Description:

Plastics Laboratory needed for ASTM Testing, Melt index testing


Description:

FDA GMP Optical Laboratory needed for plastics testing to determine ABBE number on a sample, sample is a thin circular plastic material.


Description:

USA plastics laboratory needed for ASTM Testing to identify a plastic pellet on an extruder screen.


Description:

Hong Kong or China materials laboratory needed for Plastics Testing: ASTM Testing to test ASTM D6954-04 in accordance with ASTM D6954-04 Tier 1 thru 3.


Description:

USA Plastics laboratory needed for materials testing to EN 1598 to test 13 oz PVC material to EN1598 for blockout out properties for use as welding curtain material.


Description:

Plastics Laboratory needed for ISO or ASTM Testing: polyethylene testing for Oligomer Content in Polyethylene Terephthalate (PET) chips using either HPLC, MAE or Soxhlet extraction technique.


Description:

Europe, Japan, Korea, India Plastics Laboratory for PET Testing: Determination of P, S,Ag in PET polyester chips powder with XRf by Lucas-Tooth calibration method.


Description:

Asia Plastics and Polymer Laboratory needed for ASTM Testing to ASTM D6954.


Description:

USA Plastics Materials Laboratory needed for plastics testing: Contact angle on a curved surface
Oxygen Transmission
4 samples +/-2


Description:

Plastics Physical laboratory needed for DIN Testing of PVC membrane to DIN 53370,DIN53455,DIN53454,DIN53363,DIN16726,DIN53495,DIN50014


Description:

Plastics Laboratory needed for PVC film testing: IMDG 5.3.1.1.1.2 test on rigid pvc film


Description:

Plastics and Polymer Analytical Chemistry Laboratory needed for plastering compound testing. 1.Total Calcium content 2.Total Magnesium content 3.Loss on Ignition 4.Percentage silica 5.Polymer extraction and identification 6.Test results and its interpreta...


Description:

US Plastics Laboratory needed for ASTM Testing: physical properties of a plastic resin tensile, elgongation, yield, flex modulus, melt index, impact - izod preferred charpy okay, hardness (shore A) SAMPLES NEED TO BE MOLDED


Description:

Plastics Laboratory needed for ASTM Testing, biodegradation testing to ASTM 5338 for 10 samples of polypropylene containing an additive which should facilitate their biodegradation.


Description:

Plastics Laboratory needed for Quality COntrol Testing, acrylic testing of acrylic used for the see-through tank wall of a new shark tank to be installed within a new world class aquarium under construction in the Salt Lake City area. The manufacturer is...


Description:

Plastics Laboratory needed for ash testing on polyurethane foam.


Description:

Food Laboratory needed for Food Packaging Testing,
Migration Testing for Food Contact Surfaces (polymers, adhesives, metals, lubricants, colorants, plastics, papers)


Description:

US Plastics Laboratory needed for rubber equivalency testing to show equivalency to component already used in product. We need to have rubber tested using this method and compare both lots. We will have 10 samples of each.


Description:

Asia, India or Europe Physical Materials Laboratory needed for ASTM Testing or ISO Testing: Thermal Testing Coefficient of Linear Thermal Expansion for Plastics


Description:

Plastics Laboratory needed for APET Sheet testing


Description:

USA Materials Laboratory needed for ASTM Testing adn FDA Testing of bioplastic materials : 1.Bio-content analysis - ASTM D6866 2.Food Packaging Contact Safety - FDA 178 3.Biodegradability - ASTM 6400 ASTM 4.As well as another biodegradability test for o...


Description:

INDIA PLASTICS LABORATORY NEEDED FOR MATERIALS TESTING OF PLASTIC COMPONENT TO VERIFY WHICH IS MATERIAL AS WELL AS MATERIAL DEFINATION AS PER INDIA MARKET. REGARDS KOTEKAR


Description:

USA Plastics and Polymers Laboratory needed for Hydrolytic Stability Testing of Polurethane


Description:

India Plastics Laboratory needed for plastics testing of 2,2(1,2-ethenediyidi-4,1-phenylene bisbenzoxazole% for CaCO3% testing ,Al2O3% testing,Bulk density testing ,fineness testing


Description:

Plastics Laboratory needed for Mylar film testing for ultra-violet and visible light transmission using a spectrophotometer, or similar device.


Description:

Plastics and Polymers Laboratory needed for ASTM Testing to measure melt flow rate for epoxy according to ASTM 1238-10 or ISO1133.


Description:

Materials Laboratory needed for ASTM Testing Oxo-Biodegradable plastics testing to ASTM D 6954-04


Description:

India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength.


Description:

Saudi Arabia plastics laboratory needed for plastics identification testing to identify the materials included and the percentage


Description:

Plastics Laboratory needed for analytical chemistry testing of polyethylene flame retardent concentrate (pellets) that have a make up of decabromomodiphenyl oxide & antimony trioxide and need to know the % of each


Description:

Large Automotive Manufacturer needs India plastics laboratory for ASTM Testing ASTM D 955, % Shrinkage test for Plastics In this test, plastics molding is done in a mold cavity (dimensions of cavity are precisely measured) & after 24 hours, the dimensions...


Description:

Large Medical Device Manufacturer needed plastics laboratory to verify a plastic materials part surface finish against a MoldTech Standard MT-11010 or an SPI standard SPI-B3


Description:

UK Plastics Laboratory needed for PET Bottle grade Flakes testing- IV,color value, Moisture content, other plastics, PVC etc"


Description:

Asia Plastics Laboratory needed for JASO, JIS Testing, Poly Vinyl Choloride (PVC) Testing
Auto Vinyl wires testing Laboratory.


Description:

USA Plastics and Polmers Laboratory needed for RoHS and REACH Certification Testing of pipette tips (Polypropylene) to certify that they compply with RoHS and REACH directives.


Description:

Plastics and Polymers Laboratory needed for plastic testing of plastic part to 21CFR177.2410


Description:

Canada Plastics Laboratory needed for ASTM, BS, CS, BS, AS, DIN LDPE Testing for Mechanical properties of LDPE lay flat tube;  Tube stretch limit Tensile and tear strength in both direction (N/50mm, N), operating pressure (m of water)
Sample; one piece...


Description:

Plastics Laboratory needed for ISO Testing on multiaxial Impact on plastic materials to ISO 6603-2; 5samples


Description:

Food Packaging Laboratory needed for Packaging Testing of Plastic Bags, which was uses in Packaging of Foods, Edible Oil, and Vegetable Ghee etc. in Pakistan. Test Plastics bags and Food Material, (which we will send upon your request) and give us Test An...


Description:

Analytical Chemistry Plastics Laboratory needed for deformulation testing of Injection-Molded Part - What Polymer is it made of? Does it Contain any additives - UV or Slip Agents?, Any inorganic additives like talc or foam, etc. ?


Description:

New Jersey Plastics Laboratory needed for ASTM Testing: ASTM D1238Melt Index Test of LDPE 8 samples to be tested


Description:

Plastics Laboratory need for polymer testing of Rubber to determine polymer percentage, oil and wax percentage, Moisture percentage, Carbon percentage and other fillers percentage content in it? kindly send us your quotation.


Description:

Saudi Arabia Plastics Laboratory needed for chemical composition testing of Globes (around 10 Pcs) that we need to know thier chemical composition i.e. plastics materials content in them.


Description:

Physical Plastics Laboratory needed for IEC Testing: IEC 60695-11-10 Horizontal burn test Testing of PP using the horizontal burn test


Description:

Plastics and Polymer Laboratory needed for PEG 1450 testing for Ethylene Glycol and Diethylene Glycol (NMT 0.25%), which is not an NF requirement for PEG's with molecular weights > 1000.


Description:

Plastics Laboratory needed for polymer(plastic) testing of HDPE pellets for density, melt index is of the sample we will send. Also if the sample has any PP in it.


Description:

Physical Plastics Laboratory needed for moisture analysis on plastic components in addition to root cuase for torque strip out.


Description:

California plastics physical laboratory needed for wear resistance to cpsd-sl-79217-mthd


Description:

Plastics Laboratory needed for ISTA Testing: ISTA-3B tests


Description:

Plastics Laboratory needed for analysis to determine the percentage of mix in a sample of a plastic bag? We need to know the mix between HDPE and LLDPE.


Description:

India plastics laboratory needed for ASTM testing of 16 mm polycarbonate sheets


Description:

India Acoustics, Plastics Laboratory needed for Sound Transmission Loss Testing for Polymer


Description:

Europe plastics laboratory needed for REACH Compliance Testing for Determination, quantification and identification of monomer or any other substance in a polymer/copolymer.


Description:

India plastics laboratory needed for vapour proofing( permeability) property testing of Non wovwn Polymer cloth in India.


Description:

Plastics and Polymer Laboratory needed for Nissan Engineering Standard
MO135 Weatherability and light resistance test methods for synthetic resin parts. We want to test the zippers we manufacture


Description:

Materials Laboratory needed to Measure the contact angle of water with varying concentrations of surfactant on several plastics/polymers


Description:

UK Plastics Laboratory needed for durability testing of thermoplastic TPE-U and TPE-V polymer materials against the chemical and microbial degradation. And to see which if any cause the the degradation of the material.


Description:

ISO Mumbai Plastics Laboratory needed for ASTM Testing, Basic material ingredient testing, Physical & Chemical tests for Nylon Grade plastic material.


Description:

NY Plastics Laboratory needed for ASTM Testing for tensile and elongation testing of gloves


Description:

USA Plastics and Polymers Laboratory needed for Mossbauer Spectroscopy analysis of Fe in recycled automobile tires materials."


Description:

UK plastics laboratory needed for extractables testing on polyurethane non woven film materials. two samples,both to be tested for extractables using FT-IR, after 24 hours shaking in water, 24 hours shaking in ethanol and 72 hours in ethanol.


Description:

Large Mfg needs USA materials, plastics laboratory for Compounding of plasticized PVC formulations


Description:

Plastics and Polymers Laboratory needed for physical testing of polyester bands of width 5 to 10 cm and resistance in traction from 50 to 100 kN according to the width. These bands will be used as reinforcement of ground for the realization of the retaini...


Description:

Middle East Materials Laboratory needed for plastics testing green house film (Agricultural film).


Description:

FDA GMP Food Laboratory needed for foood contact surface testing ussing surrogate testing procedures in FDA's Recycled Plastics-Chemistry Considerations guidance, to document validate the efficacy of the companies recycling process to sufficiently deconta...


Description:

Plastics Laboratory needed for ASTM and ISO materials testing elastomer mixing, tensile tests, rheometrics, rubber process analysis, research and development


Description:

Materials Laboratory needed for MSDS plastics testing to establish MSDS Sheet for liquid rubber composite derived from our companies patented process.


Description:

Asia Plastics and Polymers Laboratory needed for compatibility testing for CPVC sch 80 materials compatibility to 98% H2SO4.


Description:

Ohio Materials Laboratory needed for ANSI Testing: ANSI 26.1 test groups 4, 5, & 12 under "rigid plastics" for glazed materials used in the automotive industry. Samples are simple platic hardcoated plaques.


Description:

Physical/Mechanical Laboratory needed for physical testing Vicat softening temperature testing, Melt flow rate testing and tensile properties of thermoplastics pipes.


Description:

Materials Laboratory needed for four separate ISO/DIN testing of plastic fold and form lining system (Am-Liner II). They are Type Testing (TT), Batch Release Testing (BRT), Process Verification Testing (PVT) and Audit Testing (AT)as follows: Chemical resi...


Description:

India Physical Laboratory needed for plastics testing plastic LD for MFI.Density.


Description:

UAE ISO/ASTM Environmental Laboratory needed for testing plastics for biodegradability as per ISO standards.


Description:

Materials Laboratory needed for DIN/EN/BS Physical Testing, plastics testing:
1) no emission of noxious fumes or leachates as a result of fire to DIN VDE 0482-267.
2) Light transmittance to EN 1794-2 Annex F or DIN 5036.
3) Specular Gloss Values for no...


Description:

India ASTM Physical Laboratory needed to test Brittleness temperature of plastics by impact as per ASTM D 746


Description:

Physical Laboratory needed for water vapor transmission of paint and plastic film, thermal conductivity and shrinkage of glass reinforced plastics testing.


Description:

USA Analytical Chemistry Laboratory needed for analysis of Calcium Carbonate Concentrate for use in plastics extrusion. Would like to know percentage of Calcium Carbonate, Particle size of the Calcium Carbonate, any coatings or other additives found in t...


Description:

New Zealand Plastics and Polymers Materials Laboratory needed for testing Thermoformer film approved for boil in the bag application being reheated during microwaving of product by customers. Need testing to show if cooking instructions are followed, that...


Description:

Eastern US ASTM laboratory needed for ASTM F640 Standard Test Methods for radiopacity of plastics for medical wse -- I want a qualitative determination of radiopacity for a polymer.


Description:

Asia Mechanical laboratory needed for ASTM Testing of PE pipes such as ASTM D1505, D1238, D790, D638, D1693, F1473, D2837, D746, D1603, D792, F74, D3350 & D1248 on plastics and polymers


Description:

India Physical Laboratory needed for raw material testing for plastics pvc or pet. Required testing: tear, tensile, haze, shrinkage, co- efficient(dyanamic, static).


Description:

India Analytical Chemistry Laboratory needed to estimate molecular weight of water soluble polymer. Plastics and Polymers


Description:

Plastics and Polymers Laboratory needed for polyurethane testing wood floor to determine what finish was used. i.e. polyurethane or moisturecure


Description:

Asia Plastics and Polymers, Analytical Chemistry Laboratory needed to deformulate a material used as a seam sealant in textile application. Need to identify the types of polymers, solvents, and hardeners used.


Description:

Southwest USA Plastics Laboratory required to identify a type of plastic coating.
i have a baseline sample, and two samples which i like to know if one of sample matches with a baseline sample.


Description:

Plastics/Materials Laboratory required for testing
DIN 16726 & DIN 52133


Description:

South Africa Plastics Laboratory required for testing of acetal plastic


Description:

USA, Mexico Weathering Laboratory needed for NES 66862NDS00 WEATHERABILITY TESTING OF Plastics Materials


Description:

China Manufacturer needs Asia Packaging Laboratory for Water Vapour Transmission Rate testing on several flexible plastic packaging materials. In particular we need to conduct WVTR testing on:



- Woven High Density Polyethylene (HDPE) lam...


Description:

Plastics Manufacturer needs Tennessee Physical Laboratory for Load testing an undergroud box for stormwater detention


Description:

Plastics and Polymer, Materials Laboratory needed for quality and longevity testing on water pipeline rubber rings


Description:

Plastics and Polymers Laboratory needed for radiopacity testing on silicone wound drains. Testing is to be performed on each production lot, ongoing basis. Project is in quotation phase.


Description:

California importer of sky garments from Italy to the US needs water resistance AATCC and ASTM certification testing
For the purposes of subheadings 6201.92.15, 6201.93.30, 6202.92.15, 6202.93.45, 6203.41.05, 6203.43.15, 6203.43.35, 6204.61.10,
6204.63...


Description:

Texas Plastics/Materials Testing Laboratory needed for several plastic inj molded parts which need to have their respective grade,type, filler polymers identified.


Description:

USA ASTM Materials or Plastics Laboratory needed for plastic film tested under ASTM D6400.


Description:

North America ASTM Materials Laboratory needed for ASTM biodegradability testing, oxo-biodegradable additive, prodegradant for polyolefins (film, sheet). Need testing of polypropylene sheet as per ASTM 6954. ASTM 6954-04 Standard Guide for Exposing and Te...


Description:

Europe BS EN 1225 Plastics Laboratory needed to test biodegrability of plastics or polymers.


Description:

USA Materials Laboratory needed for ASTM biodegradability testing, oxo-biodegradable additive, prodegradant for polyolefins (film, sheet)

We contact you for testing polyethylene film as per ASTM 6954.

ASTM 6954-04 Standard Guide for Exposing and Te...


Description:

Europe FDA, GMP materials laboratory needed for plastics testing, we need to check if the material complies with FDA requirements (mainly PVC and silicone hoses) for plastics in contact with food/drinking water.


Description:

India ASTM Materials Testing Laboratory needed for:
Plastics Discoloration Testing
Physical Properties Testing
Simulated Environmental Exposures Testing Studies
Heat Deflection Testing
Mechanical Properties Testing
Peel Strength Testing
Flexure Mod...


Description:

Any Location Plastics Testing Laboratory needed for Permeability Analysis of Plastic Sheets - Oxygen, Carbondioxide and Water Vapor Transmission on Plastic sheets such as PET and PVC.


Description:

Europe Plastics and Polymers Laboratory needed for standard Luposol Stress Crack Testing on plastic parts injected in PE-HD for the automotive industry for resistance to stress cracks from exposure to fuels


Description:

Midwest USA materials laboratory needed for testing lead content in plastics and laminating films.


Description:

India materials laboratory needed for plastics and polymer testing mainly used in automotives,irrigation projects"


Description:

USA Radiochemistry Laboratory needed for ASTM F640-79 "Standard Test Methods for Radiopacity of Plastics for Medical Use" - testing required to fulfill requirements for above standard


Description:

Pharmaceuticals materials Laboratory needed for USP 88 <661>Biocompatibility Testing of Plastics, Class VI Testing for Polyethylene terephthalate (PET) Plastics.


Description:

Materials Laboratory needed for testing plastics with impregnated materials such as conducted basic burn tests etc. but have found determination will require testing outside their capabilities.


Description:

USA Materials Laboratory needed for ASTM Testing of plasticsheet to ASTM D6954-04 Tested methods : as described in ASTM
Test sample 1 : plastic sheet, 2 mm thick.
Test sample 2 : plastic film, 0.1 mm thick.


Description:

Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis - Part 1: Test Method For Dry Components Of Premixed Mortar EN 1767 Products and systems for the protect...


Description:

West Coast USA Materials laboratory needed for Radiography examination of PLASTICS, eg CPVC; possibly live flouroscopy. Not sure if this technology exists.


Description:

USA Food Analytical Chemistry Laboratory needed for overall migration testing from OML plastics sheet into food simulants, per EU Food Compliance requirements


Description:

Toy Product Safety Laboratory needed to test toys using an XRF for lead and all metals and plastics. Will ship toys to lab, they will test and send report and ship back.


Description:

Large Medical Device Mfg needs USA Plastics and Polymers, Radiochemistry Lab for ASTM Testing: ASTM F640-07 "Determining Radiopacity for Medical Use" on several polymer samples.


Description:

Recycled Plastics Manufacturer needs USA Materials Lab for ASTM product quality testing. Hot/cold water is used to wash the recycled PET bottles to make it as clear and colored PET Flakes, we would like to know our product's specifications. Due to we curr...


Description:

Analytical Chemistry laboratory needed for ASTM D6954-04 Biodegradation Testing Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation


Description:

Materials laboratory needed for all polymer testing of thermoplastics & thermosets plastics.


Description:

Analytical chemistry laboratory required to provide plastics and polymer testing of polyester film samples so as to identify them as separate from PET film class 1)PET-G film 2) PET+ A-PET coextruded film 3) Film having more than one GSM coating

Kindly...


Description:

Microbiology Laboratory needed for Microbiological testing for solid surfaces, including polymers, plastics and textiles. Test types include Survival/ Kill Testing and protocols for
Anti-Microbial Textile Testing.


Description:

ISO Analytical Chemistry Laboratory needed for ASTM Testing, SEM, EDX, XRF for deposit testing ; metallurgical failures testing ; FTIR for plastics


Description:

Analytical Chemistry Laboratory needed for gas testing in compact fluorescent lamps and incandescent lamps, as well as their approximate mass balance.

Most likely we would test 2 - 3 popular models of both types of light bulbs. Additionally, the tests...


Description:

Microbiology laboratory needed for ASTM or ISO testing for Anaerobic Biodegaradation of Plastics


Description:

Analytical Chemistry Laboratory needed for ATR and FTIR spectrum analysis testing for various types of plastics


Description:

Physical laboratory needed liquid strike through testing by PE film perforated
-plastics


Description:

Materials Laboratory needed for UL94 flammability testing on plastics


Description:

Analytical Chemistry Laboratory needed for testing plastics in contact with cosmetic products for metals and anti oxidizing


Description:

Materials laboratory needed for ASTM Testing of thin file polymer samples according to ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics


Description:

Manufacturer of marine care chemicals needs materials and toxicology laboratory for testing 7 seperate products for boat care and cleaning. Our question is can these products be tested to ensure they do not have adverse effect to marine life when washed ...


Description:

Product Safety Laboratory needed for testing hypoallergenic performance and sin sensitivity of a plastics compound to be used as a wraparound skin for cell phones.


Description:

Food packaging laboratory needed for ASTM Testing of bio-plastics to meet ASTM D6400-99 Certified testing of starch based plastic food serviceware for adherence to ASTM D6400-99 in preparation for submission to BPI.


Description:

Environmental laboratory needed for biodegredation testing of plastics


Description:

Analytical Chemistry Laboratory needed for ASTM Testing of plastics to certify that they meet ASTM D6400 standards for biodegradability


Description:

ISO Materials Laboratory needed for testing
an edge-banding tape to cover rough edges on plastic masks used for radiation therapy. The tape is a laminate of two forms of vinyl with an acrylic adhesive.
My regulatory consultant is recommending I have a...


Description:

PHYSICAL LABORATORY NEEDED FOR ASTM TESTING (ASTM C1371-97 AND ASTM E 84097A) PLASTICS (METALLIZED POLYESTER FILM) EMISSIVITY , Flame retardency ASTM E 84097A and Reflectivity


Description:

Materials laboratory needed for fir rating testing done on a acrylic based plastics panel


Description:

Physical laboratory needed for ASTM D5492-98 testing of Xylene Solubles in Polypropylene Plastics


Description:

Physical laboratory needed for testing tensile strength of automotive plastics after exposure to lubricants


Description:

Mechanical laboratory needed for tensile testing of plastics at high temperature(between 100 and 150 Degrees Celsius) with the use of an extensometer


Description:

Greenhouse manufacturere needs laboratory for testing 2 types of plastics that are used in covering greenhouses for weather resistance and shelf-life.


Description:

Automotive manufacturer needs laboratory for physical and electrial Testing the operating performance of the car in extreme winter climatic conditions in Russia. Engine Startability, Fuels- Oils and Gas and Grease, Plastics and Rubber Parts, Heating and ...


Description:

Canada Analytical Chemistry Lab needed for Melt index testing, SEM and FTIR in plastics materials


Description:

ASTM Physical properties testing for chrome plated plastics for plating thickness, CASS,


Description:

Analytical Chemistry laboratory needed for analysis of medical rubber stoppers that mixed with natural rubberf or contaminate natural rubber and also what percentage of Natural rubber has been contaminated in this rubber stopper. Please advise us how many...


Description:

surface roughness and contour measurement of plastics.On-going inspection of molded plastic parts. 6 measurements/part, approx 250 parts in 3 wks, on-going test need approx 20 parts/month.Need surface roughness or contour measurement machine capable of me...


Description:

Analytical Chemistry Lab needed for Chemical Separations, Inorganic, Thermal, Molecular structures, Surface, Microscopy and X-Ray, Process Analytical, Plastics Characterization
"