Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
Independent Laboratory needed for stainless steel wire testing to EN10264-4:2012 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
Please c...
ISO 17025 Accredited Electrical Laboratory needed for IEC testing of cables for all parameters
Laboratory needed for copper wire testing of high-purity wire copper (32 cm length and 8 mm diameter) so we need to analyze the Residual Resistivity Ratio (RRR). We have refe...
Laboratory needed for RF Testing ANSI / SCTE 153 2016, Paragraph 4.1, 4.2, 4.3, 4.4, 4.5 (Bandwidth, Passband Response, Insertion Loss, Return Loss, Isolation)
Corrosion R...
Europe Electrical Laboratory needed for ISO testing of cable to ISO 6722-1 Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, test methods and requirem...
Independent Laboratory needed for TXL and GXL cable testing to SAE J1128 Low Voltage Primary Cable
Electrical Laboratory needed for IEC wire connector pull test and hi-pot electrical testing for crimped connector and wire to IEC 60352
Electrical Laboratory needed for automotive electrical wires and cables fire performance testing according to ECE R118-02 & R100.
Industrial Laboratory needed for the following IEC wire assembly testing: wire pull testing, hi-pot testing of crimped wire assemblies in passenger rail car manufacturing for ...
Laboratory needed for relaxation testing for PC strands (7wires) as per ASTM A416/416M Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Conc...
Electrical Laboratory needed for modular wiring products tested and certificated to BS8488 Prefabricated wiring systems intended for permanent connection in fixed installation...
Electrical Laboratory needed for SAE certification and testing of single conductor wires to SAE J1128 Low Voltage Primary Cable
Industrial Laboratory needed for radiance testing of electroluminescent wire that is approx. 125 long and 1/2 diameter per requirements of table 3 on page 15 of MIL-STD-3009 (...
ISO 17025 Accredited Laboratory needed for DIN testing of Messenger Wire according to DIN 48201, Dropper Wire, DIN 43138, Contact Wire and according to BS EN 50149 Railway ap...
Metallurgical laboratory needed for ASTM testing of copper clad steel wire to two ASTM Standards including:
ASTM B227, Standard Specification for Hard-Drawn Copper-Clad St...
Mechanical laboratory needed for ASTM Testing (yield/breaking strength/elongation) of uncoated seven-wire strand (15.24mm) in accordance with ASTM A416 Grade 270.
Electrical laboratory needed for AITM testing of wires /cables 1) AITM 2.0008A Smoke Density Electrical Wire/Cable for Power Supply, 2) AITM 2.0008B Smoke Density Electrical a...
Metallurgical materials laboratory needed to quantify surface roughness of thin metallic strips (interferometry, atomic-force microscopy AFM, etc.)
Large corporation needs metals materials laboratory for RoHS testing for plain-carbon steel wires of various sizes, grades, and treatments. Wire is in continuous length, but ...
Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.
1) Copper conductor, Mica tape, XLPE insulation, LSHF Bedding, Galvanize...
Physical laboratory needed for EN electrical wiring testing to
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption EN 6059-305
Dynamic cut ...
Chemistry laboratory needed for testing a liquid sample via gas chromatography for the presence of the organic compound, diacetyl.
Electrical laboratory needed for IEC certification testing for electrode holder, cable connector, and work clamp under IEC 60974, Arc welding equipment - Part 1: Welding power...
Third-party testing laboratory needed for Ethernet cables (CAT6 and CAT6A) used in networking
Electrical laboratory needed for SAE Testing to SAE J1292, Automobile and Motor Coach Wiring
Electrical Laboratory needed for IEC Testing for Aluminium and nylon Cable Cleats as per attached specs IEC 61914:2009 (Old BS EN 50368) Cable Cleats & Short-Circuit Calculat...
ELectrical Laboratory needed for SAE Testing to Test impedance of twisted pair wires at 1MHz by the open and short methods per SAE J1939-11. Wires are 20AWG type TXL, standard...
Physical Laboratory needed which has an accreditation for the scope of the test methods in accordance with IEC 60754-1 - Test on gases evolved during combustion of materials f...
United Sates Materials Laboratory needed for copper wire testing for concentration and amount
of impurities present in the sample,which elements it contain , how long
will...
East Coast USA Physical Materials Laboratory needed for Micro hardness testing of silver-plated (less than 15wt% silver) copper flat wire
Number of samples not yet known
Sam...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests