Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
Looking for ASTM F64-23 testing for radiopacity of inferior vena cava (IVC) medical tubes.
Looking for laboratories that can run Blood Component Compatibility Test and Blood Filter Test per ISO 1135-4 and ISO 1135-5 for blood tubing.
Please let us know if ...
Need an Australian laboratory for compliant testing for disposable ECG electrodes in a class IIb wearable medical device to AAMI EC12 (Disposable ECG electrodes)
USA LABORATORY
Biotechnology Company needs USA Contract Analytical Laboratory for identification of unknown chemical that has appeared on one of their diagnostic test produc...
MULTIPLE SAMPLES
BUDGET APPROVED ($1,000-$2,000)
Request a quote for RNase testing in an empty syringe for about 20 samples, including negative and positive con...
Philippines laboratory needed for Chorioallantoic Membrane (CAM) Assay to determine the biocompatibility and angiogenic response of polyglycolic acid (PGA) Suture
MULTIPLE PRODUCTS
Need ISO 17665 testing for Surgical Instruments: Cutting (scissors) & Retractors, and reports per the Saudi Food and Drug Authority. ISO 17...
Medical Device Laboratory for ISO pharmaceutical syringe testing:
• AD Syringe (2ml): Complete testing, including the Re-use Prevention Feature Test, for compliance with ISO ...
MULTIPLE TESTING
South America Medical Device Laboratory needed for AAMI testing for disposable surgical gowns.
Medical supplies laboratory needed for ASTM testing of surgical gloves per ASTM D6978-resistance to permeation to chemotherapy drugs.
LONG-TERM TESTING
BUDGET APPROVED ($5,000-$10,000)
Medical Device Laboratory needed for ANSI impedance testing for conductive hydrogel used for a skin care medi...
MULTIPLE PRODUCTS
Medical supplies laboratory needed for sterility testing on gauze, adhesive bandages, and triangular bandages.
Large healthcare waste management company need CSA certification for single-use sharps containers.
Please advise if this is something that can be done.
CSA: Can...
URGENT
Pharmaceutical Laboratory needed for iron content testing in normal saline (NS) bags per an in-house or USP method.
Thank you!
URGENT
MULTIPLE TESTING & SAMPLES
Third-party medical devices testing lab (India-based preferred) needed to conduct transportation and storage simulation tests for Yankauer ...
Contract Laboratory needed for testing surgical absorbent cotton wool per the US 704:2014 specification for medical use.
Please confirm if your lab has accreditation for this...
LONG-TERM
ASIA / PAKISTAN accredited testing lab is needed for the testing of surgical absorbent cotton wool (as per US 704:2014).
BUDGET APPROVED ($10,000-$25,000)
MULTIPLE TESTING
Large eyewear and lenses supplier needs an accredited contract laboratory to conduct oxygen permeability testing of 12-15 ...
California Laboratory to test how their reinforced medical tubing product can be seen under x-ray and fluro in comparison to our competitor products.
USA Contract Microbiology Laboratory needed for ophthalmic medical device research study
Aim 1: Assess effectiveness of UV-C disinfection on reducing pathogen load (BS 8628 p...
URGENT REQUEST
Indian lab needed for National Fire Protection Association (NFPA) certification for one of our dialysis products
MULTIPLE TESTING
Contract Laboratory needed for TO-17 and TO-15 compliant clinical air/breath sample testing of .having (i) thermal desorption tubes and (ii) Entech silonite ...
MULTIPLE TESTING
Medical Device Laboratory needed for MSDS testing class l medical brush heads PET coated galvanised wire. I don?t have any MSDS for this wire. I would like t...
Medical Device Company needs Contract Laboratory for TOC testing of our Deionized water system with a certificate with results.
MULTIPLE PRODUCTS
Contract Laboratory needed for deformulation of intravascular catheters and applicable coatings by FTIR, NMR, DSC, HPLC, XRD
MULTIPLE TESTING
MULTIPLE PRODUCTS
USA Contract Laboratory needed for contact testing for the amounts of Fluoropolymers, or PFAs, and organic fluorine in different brands of...
USA LABORATORY
NEW PRODUCT DEVELOPMENT
Contract Medical Device Laboratory needed for new long term wound care adhesive testing and reliability research study on new adhesive...
USA LABORATORY
NEW PRODUCT DEVELOPMENT
USA Medical Device Laboratory needs Bioanalytical Laboratory for residual cross-linker detection analysis for lyophilized collagen med...
Accredited Medical Device Laboratory needed for ISO testing of contact lenses for water content. I according to ISO 18369-4 Ophthalmic optics, Contact lenses Part 4: Physicoc...
MULTIPLE TESTING
Medical Device Laboratory needed for ultrasound gel testing as per the following test list:
- Acoustic Impedance per internal method
- Sound Attenuation...
LONG TERM TESTING
Large Corporation needs Pharmaceutical Laboratory for impurity level testing under 5 ppm of 3M HFE 7000 Engineered Fluid by GC/MS (Gas Chromatography Mass S...
APPROVED BUDGET
SWITZERLAND, GERMANY, FRANCE OR UK LABORATORY
Large Company needs ISO 17025 Accredited Laboratory for ISO contact lens water testing in compliance with ISO...
USA FDA GMP Medical Device Laboratory needed for Silver Collagen Wound Dressing Silver Characterization testing including the following tests:
i. Particle size(s): Field Em...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Medical Device Laboratory needed for ISO testing of Nebulizer Mask, Oxygen Mask, and Nasal Oxygen Cannula to ISO Standards ISO 5356-1, ...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Manufacturer of Dental laboratory devices needs Medical Device Laboratory for comprehensive materials testing to ensure the quality, durab...
FDA cGMP Medical Device Laboratory needed for the following class II medical device for the following GLP Studies of a class II Cytological cervical spatula.medical device:...
MULTIPLE TESTING
Medical Device Laboratory needed to performing compatibility testing for personal lubricant against latex and/or non-latex condoms to evaluate the compatibi...
MULTIPLE TESTING
Medical Device Laboratory needed for AAMI testing of disposable pressure transducer according to AAMI BP22:1994(R)2016. Blood Pressure Transducers.
USA LABORATORY
MULTIPLE TESTING
USA Medical Device Laboratory needed for ISO Condom Compatibility Testing to ISO 4074 natural rubber latex condom compatibility with our nove...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Large Third-Party Independent Laboratory needed for testing alcohol prep pads and sterilizing wrap clothes. Product: lsopropyl Alcohol P...
MULTIPLE TESTING
Medical Device Laboratory needed for ISO oxygen permeability testing for contact lenses as per ISO 18369-4:2017 Ophthalmic optics ? Contact lenses
USA LABORATORY (Northeast USA Laboratory Preferred)
USA FDA Veterinary Medicine Laboratory needed for labeling claims substantiation testing for pet training absorbent pads ...
MULTIPLE TESTING
Medical Device Laboratory needed for ISO testing of Blood bags according to ISO 3826.Testing items Pressure Resistance (Resistance to leakage).
CANADA LABORATORY
MULTIPLE TESTING
Large Medical Device Company needs Independent Accredited Laboratory for Deionized Water testing to determine the following chemical and ...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Packaging Laboratory needed for ASTM4169 medical thermometer products testing to verify our shipment method to/from an outside vendor that...
MULTIPLE TESTING
ISO Certified Analytical Laboratory needed for medical consumable products testing for Gas Permeability and Carbon dioxide.
MULTIPLE TESTING
FDA GMP Medical Devices Laboratory needed for FDA Clearance testing on an adjustable dilator for the OBGYN market for biocompatibility of the plastic and sil...
URGENT TESTING
USA Medical Device Laboratory needed for testing a polymeric material for softening point via the Mettler Cup-and-Ball Method. Please advise what contract labs...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests