Laboratory Outsourcing and Scientific Sourcing Center

URGENT

LONG-TERM

Chemicals laboratory needed for USP impurities testing in Methylene Blue powder - specifically looking for metal contamination in the powder.

URGENT
MULTIPLE SAMPLES
BUDGET APPROVED ($1,000-$2,000)
Contract analytical chemistry laboratory needed for melanins testing for the level and percentage of melanin. Also n...

URGENT
USA/NEW JERSEY Third-party analytical testing laboratory needed for testing several masterbatches (MB) for amide content.
Could you please confirm if you are able to ...

Independent heritage testing laboratory (SRI LANKA / INDIA) needed to analyze pigments from oil paintings on canvas non-destructively.
If you can do the service kindly reply...

Contract laboratory needed to run ASTM D 4359-90 (Standard Test Method for Determining Whether a Material Is a Liquid or a Solid) testing

Contract Laboratory needed for PCBS testing on a number of dry powder samples (organic pigment). 4 ? 8 samples. Need lowest detection limit possible??please specify.

Do ...

Food Manufacturer needs FDA Food laboratory for testing a product under the FDA's import alert (Detention Without Physical Examination and Guidance of Foods Containing Illegal...

MULTIPLE PRODUCTS
Contract Laboratory needed for Polychlorinated Biphenyls (PCBs) analysis for organic pigment samples. Total value required with a detection limit of 0.1 ppm...

MULTIPLE TESTING
Contract Laboratory needed for ISO Zinc content and Phosphate content testing of a powdered pigment to ISO 6745 Implants for surgery. Metal bone screws with ...

Contract Analytical Chemistry Laboratory needed for ISO purity testing of titanium dioxide per ISO 591 Titanium dioxide pigments for paints

MULTIPLE TESTING
Consumer Product Safety Laboratory needed for safety and ingredient testing of semi-permanent makeup tattoo pigment testing

Contract Analytical Laboratory needed for help procuring materials and formulating isocyanate free, pigment based coating in 16 colors

MULTIPLE TESTS
Medical Device Company needs Biophysical Laboratory for ISO dentistry gel testing to ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength te...

Materials Laboratory needed for ASTM Testing of pigments to ASTM D283 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments

MULTIPLE PRODUCTS
Toxicology Laboratory needed for the following OECD And GLP toxicology studies on various pigments:

Acute Oral Toxicity - Acute Toxic Class Method, OECD ...

USA LABORATORY (GLP)
MULTIPLE TESTS
MULTIPLE PRODUCTS
GLP Contract Toxicology Laboratory needed for performing the following toxicology and analytical testing for Endpoint ...

USA LABORATORY
Large Outdoors Company needs Physical Laboratory for ISO filter pressure value testing according to ISO 23900-5:2015
Pigments and extenders ? Methods of dispe...

Contract Laboratory needed for ASTM Testing of TiO2 pigments for volume resistivity - using ASTM D257. Currently looking to test 7 samples.

Large Corporation needs Contract Laboratory for deformulation of pigment dispersions and dye solutions.Content listings including that of adjunct materials (ie dispersants, so...

Materials Laboratory needed for ASTM Testing of concrete to ASTM C 979 Standard Specification for Pigments for Integrally Colored Concrete

Medical Device Biophysical Laboratories needed to quote on the cost of conducting some tests on some 3D printed medical devices accordance with ISO 10328.Prosthetics - Structu...

USA CAP/CLIA Clinical Laboratory needed for bioanalysis for FDA Clinical Trial of new regulated medical product used to assist doctor in diagnosis and treatment. Transfer, dev...

Medical Device Company needs Biomechanical Laboratory performance testing on 3d printing orthotics including compression, tension, torsion, and cyclic load tests.

USA Bioanalytical Laboratory for partial thromboplastin time PTT testing PTT testing for the development of a human cell culture line. The cell culture supernatant needs to be...

BUDGET APPROVED Europe Pharmaceutical Analytical Laboratory needed to : analyse PSD (particle size distribution) for products as glucose syrup dried.

Large Pharmaceutical Company needs Laboratory for USP physical characterization testing (surface tension, viscosity, density, ionic strength) on an OEB5 liquid formulation and...

Asia Biophysical Laboratory needed for experimental abrasiveness testing of different teeth whitening toothpastes .

Asia Biophysical Laboratory needed for testing for the measurement of tooth surface roughness.

Medical Device Laboratory needed for ASTM testing of orthopedic intramedullary nail to ASTM F1264 Standard Specification and Test Methods for Intramedullary Fixation Devices

Medical Device Laboratory needed for Biomechanical testing for orthopedic implants i.e. interlocking nails, bone plates, bone screws and spine fixation system ASTM F1264
ASTM...

Laboratory needed that is capable of performing chemical tests for the pigment Carbon Black Powder, according to Brazilian Ordinances RDC 17 (page 20) and RDC 52 (Item 2).

Orthopedic Medical Device Laboratory needed for biophysical /biomechanical testing/ ISO certification of medical prothesis products with ISO 10328 'Prosthetics, Structural tes...

Preclinical Biophysical Laboratory specializing in bone research is needed for the evaluation of osteoinductive properties of a new medical device on in vivo mandibular bone ...

Laboratory needed for Certificate of Friction COF testing of a polymer medical adhesive product. Testing to be performed in a reciprocal movement (back and forth - between two...

Medical Device Manufacturer needs biomechanical laboratory for ISO 10328 Lower limb prosthesis structural testing

Medical device laboratory needed for physical testing of transfusion sets to the physical requirements of ISO 1135-4, Transfusion equipment for medical use -- Part 4: Transfus...

Medical device laboratory needed for several ASTM tests on orthopedic implant components as per ASTM F382 Standard Specification and Test Method for Metallic Bone Plates ASTM ...

Orthopedics medical device laboratory needed for physical certification testing of prosthetic devices to ISO10328 (Prosthetics - Structural) for a lower limb prosthesis

Biomechanical / medical device laboratory needed for development of spinal implantable device manufactured with implantable grade PEEK and Titanium 3. The following testing i...

Laboratory needed for shear or flow testing of powdered yeast extract to detect differences.

LONG-TERM TESTING Pharmaceutical analytical laboratory needed for in vitro release testing & physical characterization (viscosity and rheology) for drugs in solid oral dosage ...

FDA GMP Bioanalytical laboratory needed for AATB human tissue bioanalysis including stability studies, protein degradation, bioburden and tensile strength.

Bioanalytical laboratory needed for structural analysis of therapeutic protein molecule by FTIR (ATR) aqueous samples, like BSA in aqueous, etc.

Bioanalytical laboratory needed for quality control testing of reference materials, including identification and purity assay by HPLC, LCMS, IR, UV-Vis, NMR, Polarimetry

Medical Device Manufacturer needs bioanalytical laboratory needed for USP particle analysis on samples taken from medical device. Please provide quote on samples taken from th...

Bioanalytical laboratory needed for active pharmaceutical ingredient API characterization testing:: hygoscopicity, solubility, pH, dissociation constant, partition coefficient...

Pharmaceutical analytical chemistry laboratory needed for particle size analysis using a Malvern Zetasizer ZS90 with the red laser and a stray-light filter.

Pharmaceutical company needs *Globule size limits and *Limit of free fatty acid tested per USP 39 injectable lipid emulsion standards Per: Method I and Method II as directed u...